TMF

TMF In - Line Centrifugal Fans

GENERAL DESCRIPTION
The TMF is a series of centrifugal in-line fans with the advantage, typical of
axial fans, to convey air along the same axis of the impeller. This feature, the
limited dimensions and the standardized inlet and outlet sizes grant a particular
ease of installation. The low noise level and the good pressure head make them
ideal for industrial and residential installations, in extracting hoods and small
exhausting plants, since they can be installed in any point along the duct or at
the duct ends, either in intake or exhaust. They are suitable to convey clean air
up to a maximum temperature of 60°C.

CONSTRUCTION
• Casing in steel sheet, protected against atmospheric agents by epoxy paint.
• Single-phase electric ball-bearing motor with non-self resetting thermal cut-
out, particularly suitable for speed regulation.
• Backward curved centrifugal impeller with high efficiency and low noise
level. Statically and dynamically balanced according to ISO 1940.
• Down stream guide vanes, for improved efficiency.
• External electric connections enclosed in a terminal box in self extinguishing
technopolymer, with IP44 protection.
• Performance in accordance with AMCA standard 210 and 300.
• Fans are supplied with fixing brackets and manufactured in galvanized steel
sheet, protected against atmospheric agents by epoxy paint and completed
with screws and wall plugs.

ACCESSORIES (Upon Request)

• Speed regulators.
• Back-draught shutters.
• Collars for fixing to the duct.

128
Performance TMF

Lp: sound pressure level measured at 3m in accordance with AMCA standard 300
Tested in accordance with AMCA standard 210 at air temperature 15°C - Barometric pressure 760 mm Hg - Air specific weight 1.22 Kg/m³

350

TMF-75
300 TMF 75
Air Flow Pressure IP/CL Sound Operating Temp
250
m3/h Pa dB(A) Min/Max (°C)

200
103 300 44/F 46 -30 / 60
Psta(Pa)

150

100
Rated Power Max. Current Nominal Speed Power Supply
50
W A RPM

0
69 0.32 2222 220-240 V/1 Ph /50hz
0 20 40 60 80 100 120
Q - Volume Flow (m³/h)
sez.

4
300

TMF 100 TMF-100

250
Air Flow Pressure IP/CL Sound Operating Temp

200 m3/h Pa dB(A) Min/Max (°C)

210 280 44/F 46 -30 / 60
Psta(Pa)

150

100

Rated Power Max. Current Nominal Speed Capacitor Power Supply

50
W A RPM uF
69 0.32 2222 3 220-240 V/1 Ph /50hz
0
0 50 100 150 200 250

Q - Volume Flow (m³/h)

350

TMF-125
300 TMF 125
Air Flow Pressure IP/CL Sound Operating Temp
250
m3/h Pa dB(A) Min/Max (°C)
240 290 44/F 48 -30 / 60
Psta(Pa)

200

150

100
Rated Power Max. Current Nominal Speed Capacitor Power Supply
50
W A RPM uF
73 0.34 2204 3 220-240 V/1 Ph /50hz
0
0 50 100 150 200 250 300
Q - Volume Flow (m³/h)

129
 Performance TMF

Lp: sound pressure level measured at 3m in accordance with AMCA standard 300
Tested in accordance with AMCA standard 210 at air temperature 15°C - Barometric pressure 760 mm Hg - Air specific weight 1.22 Kg/m³

350

TMF 140
TMF-140
300
Air Flow Pressure IP/CL Sound Operating Temp
250
m3/h Pa dB(A) Min/Max (°C)
460 300 44/F 48 -30 / 60
200
Psta(Pa)

150

100
Rated Power Max. Current Nominal Speed
Power Supply
50
W A RPM
99 0.44 2367 220-240 V/1 Ph /50hz
0
0 100 200 300 400 500 600
Q - Volume Flow (m³/h)

sez.

4
500

TMF 150 TMF-150

400 Air Flow Pressure Sound Operating Temp
IP/CL

m3/h Pa dB(A) Min/Max (°C)

300 560 380 44/F 48 -30 / 60
Psta(Pa)

300

100 200
TMF 125

100 Rated Power Max. Current Nominal Speed Capacitor Power Supply
200
W A RPM uF
0 99 0.44 2367 3 220-240 V/1 Ph /50hz
0 100 200 300 400 500 600 700

Q - Volume Flow (m³/h)

100

0
300 0 100 200 300 400

150 400
TMF-160
TMF 160
Air Flow Pressure IP/CL Sound Operating Temp

300 m3/h Pa dB(A) Min/Max (°C)

677 425 44/F 49 -30 / 60

200

100 Rated Power Max. Current Nominal Speed Capacitor Power Supply

W A RPM uF
107 0.48 2235 3 220-240 V/1 Ph /50hz
0
600 0 200 400 600 800

600

F 200 TMF 250

130
400
 TMF 150 TMF 160
300

Performance
300 300 300

100
TMF
300 TMF125
TMF 100 TMF 125
200
200

Lp: sound
200 pressure level measured at 3m in accordance with AMCA standard 300
200
Tested in accordance with AMCA standard 210 at air temperature 15°C - Barometric pressure 760 mm Hg - Air specific weight 1.22 Kg/m³
100
200 100

100
0 0
0 150 300 450 600 0100 200 400 600 800
100

6000 600
300 0 100 200 300 400
0
0 100 200 300 TMF-200 0
0 100 200 300 400
TMF 200 TMF 250
Air Flow Pressure IP/CL Sound Operating Temp

400 m3/h 400 Pa dB(A) Min/Max (°C)

150 400400
TMF 160 930 547 44/F 52 -30 / 60
TMF 150 400
TMF 160
300
300
200 200
300
Rated Power Max. Current Nominal Speed Capacitor
200 Power Supply
200 W A RPM uF
200
0
177 0
0.80 2326 5 220-240 V/1 Ph /50hz
0 250 500 750 1000 0 250 500 750 1000
100

100 100

0
sez.

4
600 0 200 400 600 800

0 0
0 150 300 450 600 0 200 400 600 80

600600 TMF 315

TMF-250
F 200 600 TMF 250 600
Air Flow Pressure IP/CL Sound Operating Temp
400
400
TMF 200 m3/h Pa dB(A) Min/Max (°C) TMF 250
1000 571 44/F 56 -30 / 60

400 400
200

200

Rated Power Max. Current Nominal Speed Capacitor Power Supply

0
200 200
0 300 600 900 1200 1500 W A RPM uF
176 0.79 2237 5 220-240 V/1 Ph /50hz
0
1000 0 250 500 750 1000

0 0
0 250 500 750 1000 0 250 500 750 1000

315

TMF-315
600 TMF 315
Air Flow Pressure IP/CL Sound Operating Temp

m3/h Pa dB(A) Min/Max (°C)

1430 680 44/F 56 -30 / 60
400

200
1500
Rated Power Max. Current Nominal Speed Capacitor Power Supply

W A RPM uF
262 1.20 2178 7 220-240 V/1 Ph /50hz
0
0 300 600 900 1200 1500

131
 DIMENSIONS TMF

sez.

Model A B C D E F G H I Kg

TMF 75 286 Ø98 170 Ø243 196 22 22 275 2xØ13 3.00

TMF 100 286 Ø98 170 Ø243 196 22 22 275 2xØ13 3.00
TMF 125 286 Ø125 170 Ø243 196 30 25 275 2xØ13 3.00
TMF 140 377 Ø147 170 Ø333 217 22 25 365 2xØ13 4.50
TMF 150 377 Ø147 170 Ø333 217 22 25 365 2xØ13 4.50
TMF 160 377 Ø160 170 Ø333 217 25 25 365 2xØ13 5.50
TMF 200 377 Ø198 170 Ø333 216 25 25 365 2xØ13 5.70
TMF 250 377 Ø247 170 Ø333 216 36 25 365 2xØ13 6.00
TMF 315 445 Ø315 170 Ø402 255 40 32 434 2xØ13 6.30
Dimensions in mm

132
Accessories TMF

SHUTTER

Back draught throttle shutter in galvanized steel sheet with gasket on the closing of the fins, for Type
greater sealing and less noise transmission.
TMF 75
TMF 100
TMF 125
TMF 140
TMF 150
TMF 160
TMF 200
TMF 250
TMF 315
sez.

DUCT CLAMPS

Duct clamp manufactured in galvanized steel sheet, inside lined with expanded polyurethane. Type
Necessary to connect the fan to the duct.
TMF 75
TMF 100
TMF 125
TMF 140
TMF 150
TMF 160
TMF 200
TMF 250
TMF 315

133
 Accessories TMF

Speed regulator

Manual voltage converter with continuous regulation by potentiometer.

Type
TMF 75
TMF 100
TMF 125
TMF 140
TMF 150
TMF 160
500W

TMF 200
TMF 250
TMF 315
sez. R16/R18

R16

35
SPEED REGULATOR

L L 72
IN OUT

M Fan Motor
48
50

230 Volt, 50/60 Hz LINE

3.

41
Neutral
82

134