Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 112 views

    Belgaum

    Uploaded by

    Sheetal Dalbanajan
    The document provides details of the rock production machinery setup by Rock Production Engineering at Mr. Dhamnekar's site from January 28th to March 15th 2011. It lists 11 items of machinery including jaw crushers, feeders, conveyor belts, hoppers and chutes. It notes that the re-shifting cost of the machinery would be Rs. 200,000 and that the machinery uses nut and bolt assembly rather than welding. The total cost of the machinery setup is Rs. 65,02,500.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as DOC, PDF, TXT or read online from Scribd

    Belgaum

    Uploaded by

    Sheetal Dalbanajan
    112 views5 pages
    The document provides details of the rock production machinery setup by Rock Production Engineering at Mr. Dhamnekar's site from January 28th to March 15th 2011. It lists 11 items of machinery including jaw crushers, feeders, conveyor belts, hoppers and chutes. It notes that the re-shifting cost of the machinery would be Rs. 200,000 and that the machinery uses nut and bolt assembly rather than welding. The total cost of the machinery setup is Rs. 65,02,500.

    Original Title

    belgaum

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    DOC, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document provides details of the rock production machinery setup by Rock Production Engineering at Mr. Dhamnekar's site from January 28th to March 15th 2011. It lists 11 items of machinery including jaw crushers, feeders, conveyor belts, hoppers and chutes. It notes that the re-shifting cost of the machinery would be Rs. 200,000 and that the machinery uses nut and bolt assembly rather than welding. The total cost of the machinery setup is Rs. 65,02,500.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as DOC, PDF, TXT or read online from Scribd
    Download as doc, pdf, or txt
    112 views5 pages

    Belgaum

    Uploaded by

    Sheetal Dalbanajan
    The document provides details of the rock production machinery setup by Rock Production Engineering at Mr. Dhamnekar's site from January 28th to March 15th 2011. It lists 11 items of machinery including jaw crushers, feeders, conveyor belts, hoppers and chutes. It notes that the re-shifting cost of the machinery would be Rs. 200,000 and that the machinery uses nut and bolt assembly rather than welding. The total cost of the machinery setup is Rs. 65,02,500.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as DOC, PDF, TXT or read online from Scribd
    Download as doc, pdf, or txt
    You are on page 1of 5

    ROCK PRODUCTION ENGINEERING

    TO,
    Mr. Chetan & K Saudagar

    Dear Sir,

    Below sent details are the machineries which are set up on


    Mr.Dhamnekar site and all the machineries are new except the
    machinery which is marked in red color below. And ROCK PRODUCTION
    ENGINEERING this firm started working on setting up the machineries
    on 28th Jan 2011 and completed on 15th march 2011 and handed over
    the set up to Mr.Dhamnekar.

    Note: Re shifting cost of the machineries will be 2, 00,000/- including


    transportation. And the below machineries are not of welding system
    but they are of nut bolt system which is easy to dissemble and
    assemble.

    Sr. Standard Deliverable & Qty


    Model Rate Amount
    No. Specification .
    1. 30" X “SAYAJI” Oil Lubricated Double 1025,000 1025,000
    15" Jaw Toggle Jaw Crusher 30” X 15” 01
    Crusher with detailed specification given (BRAND
    below: NEW
    Body Plate INVOICE
    : “SAIL” 50mm DATE IS
    Thickness
    Swing Jaw, 11/12/10 I
    Stationery ATTACHED
    Jaw, Pitman, : Steel Casting FOR YOUR
    Toggle (Rear REFRENCE
    & Front) )
    Main Block,
    Upper & : Steel Casting
    Lower Block
    Bearing (Ecc.) : 22330
    Ecc. Shaft : En-19
    Jaw Plate Size :
    (Teethed&Plai
    n)

    1
    Fly Wheel &
    : Double
    Pump
    750m X
    Feed Opening :
    375mm
    Max. Feed : Size 300mm
    Drive Motor : 40 HP
    Speed : 280-320 RPM
    Weight : 8000 Kg
    50 to 60 tons
    Capacity : with jaw
    setting off

    Sr. Standard Deliverable & Qty


    Model Rate Amount
    No. Specification .
    “WESKON” Singal Toggle Jaw
    Crusher 20” X 12” with detailed
    specification given below:
    Body Plate : 40 mm
    Swing Jaw,
    Stationery Steel
    :
    Jaw, single, Casting
    Toggle
    20" X Main
    Steel
    12" Block, Upper :
    Casting
    Jaw & Lower
    2 Crushe Bearing (Ecc.) : 22322 01 7,50,000 7,50,000
    r Ecc. Shaft : En-19
    2009 Fly Wheel : Double
    MAKE 500 X 300
    Feed Opening :
    mm
    Max. Feed : 155 mm
    Drive Motor : 30 HP
    Speed : 350-380 RPM
    Weight : 4500 Kg
    20 to 40 tons
    Capacity : with jaw
    setting off

    2
    “ROCK PRODUCT
    ENGINEERING” Make 1830mm
    X1000mm Vibro Feeder.
    (complete Set )
    • Body plate thickness – 08
    Vibro mm
    3 02 350,000 350,000
    Feeder • Vibro Motor – 5 HP
    • Collom & Base frame Box
    Type
    • Supporting M.G.liner &
    Grizzly bar

    ““ROCK PRODUCT
    ENGINEERING” Make 14’X 4’
    Vibrating Screen 4 Deck .
    (complete Set )
    • Body plate thickness – 8
    mm
    Vibratin
    4 • CONTER BALANCE – En 8 01 3,75,000 3,75,000
    g Screen
    • Bearing no.-22317
    • Collom & Base frame Box
    Type
    • Doom , Shouts & Motor
    stand

    Main Conveyor 750mm. Belt Size, 90 Feet Long Each. 2


    Set ( For (i) 30”X15” Crusher primary to secondary
    It Consist of
    • 65mm x 65 mm angle ( Heavy ) for Frame & Stand.
    • 3 Piece Heavy Duty Idler Set
    5
    • Complete with Nylon Belting, Head Drum, tail
    90 5000
    Drum & Motor Stand. 4,50,000
    Feet Per Feet
    • Ø 2.5” Bore Diameter, Shaft Mounted Gear Box.
    • 5 HP Branded Motor with Pulley.

    3
    Return Conveyor 600 mm. Belt Size 95 Feet For 14’ X
    4’Vibrator Screen to Sec. Hopper
    It Consist of
    • 65 x 65 mm angle ( Heavy ) for Frame & Stand.
    • 3 Piece Heavy Duty Idler Set
    95 4,500
    6 • Complete With Nylon Belting, Head Drum, Tail 4,27,500
    Feet Per Feet
    Drum & Motor Stand.
    • Ø 2.5” Bore Diameter, Shaft Mounted Gear Box.
    • 7.5 HP Branded Motor with Pulley

    Loading hopper with 12” heavy I beam, 5mm & 4mm


    plate,100mm heavy channel. 220ton storing capacity
    25feetX18feet
    7
    15,00,000
    1

    Primary Hopper for 30” X 15” Jaw Crusher


    It Consist of
    • Side Plate Thickness 8 mm
    8 • I beam 250mm X 85 mm 1 Set 5,25,000 5,25,000
    • Angel 65 X65 mm x 6 mm For Supporting
    • 125mm X 65mm Channel For Supporting
    ( Hopper Folding System & Holding Capacity 40 to45
    TPH )

    Secondary to Screen 750mm. Belt Size, 90 Feet Long


    Each. 2 Set ( For (i) 20”X12” Crusher & (ii) 14’X 4’
    Vibrator Screen )
    It Consist of
    • 65mm x 65 mm angle ( Heavy ) for Frame & Stand.
    9 • 3 Piece Heavy Duty Idler Set
    • Complete with Nylon Belting, Head Drum, tail 90 5000
    4,50,000
    Drum & Motor Stand. Feet Per Feet
    • Ø 2.5” Bore Diameter, Shaft Mounted Gear Box.
    • 5 HP Branded Motor with Pulley.

    Chutes for All Unit & Equipment. ( 8 mm Plate ),


    10 And Nut & Bolts for Chutes, Foundation Grouting & - 2,50,000 2,50,000
    Wooden flat for crusher unit

    4
    11 DG set 63 kv - 400000
    400000

    Sixty five lac two thousand five hundred only/- 6502500

    From : ROCK PRODUCTION ENGINEERING

    Akash L

    09945124856

    You might also like