Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 248 views

    Saic M 1070

    Uploaded by

    Hussain Nasser Al- Nowiesser
    This document is a checklist for inspecting the structural alignment during erection of equipment. It lists acceptance criteria for vertical tolerances of structural members, leveling of structures before final connections, elevation tolerances of leveling plates and bearing plates, and temporary support of columns before grouting. It also states that all column splices must conform to steel construction detailing standards. Any survey or dimensional reports must be recorded on form SATR-M-2002. It provides reference to standard 12-SAMSS-008 for the erection of structural and miscellaneous steel.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd

    Saic M 1070

    Uploaded by

    Hussain Nasser Al- Nowiesser
    248 views1 page
    This document is a checklist for inspecting the structural alignment during erection of equipment. It lists acceptance criteria for vertical tolerances of structural members, leveling of structures before final connections, elevation tolerances of leveling plates and bearing plates, and temporary support of columns before grouting. It also states that all column splices must conform to steel construction detailing standards. Any survey or dimensional reports must be recorded on form SATR-M-2002. It provides reference to standard 12-SAMSS-008 for the erection of structural and miscellaneous steel.

    Original Title

    SAIC-M-1070

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document is a checklist for inspecting the structural alignment during erection of equipment. It lists acceptance criteria for vertical tolerances of structural members, leveling of structures before final connections, elevation tolerances of leveling plates and bearing plates, and temporary support of columns before grouting. It also states that all column splices must conform to steel construction detailing standards. Any survey or dimensional reports must be recorded on form SATR-M-2002. It provides reference to standard 12-SAMSS-008 for the erection of structural and miscellaneous steel.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    248 views1 page

    Saic M 1070

    Uploaded by

    Hussain Nasser Al- Nowiesser
    This document is a checklist for inspecting the structural alignment during erection of equipment. It lists acceptance criteria for vertical tolerances of structural members, leveling of structures before final connections, elevation tolerances of leveling plates and bearing plates, and temporary support of columns before grouting. It also states that all column splices must conform to steel construction detailing standards. Any survey or dimensional reports must be recorded on form SATR-M-2002. It provides reference to standard 12-SAMSS-008 for the erection of structural and miscellaneous steel.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 1

    SAUDI ARAMCO ID/PID - 18-MAY-05 - REV 0 (Standards Cutoff - August 2004)

    SAIC NUMBER DATE APPROVED QR NUMBER


    SAUDI ARAMCO INSPECTION CHECKLIST
    Inspection Of Structural Alignment During Erection SAIC-M-1070 18-May-05 CIVIL-
    PROJECT TITLE WBS / BI / JO NUMBER CONTRACTOR / SUBCONTRACTOR

    EQUIPMENT ID NUMBER(S) EQUIPMENT DESCRIPTION EQPT CODE SYSTEM ID. PLANT NO.

    LAYOUT DRAWING NUMBER REV. NO. PURCHASE ORDER NUMBER EC / PMCC / MCC NO.

    SCHEDULED INSPECTION DATE & TIME ACTUAL INSPECTION DATE & TIME QUANTITY INSP. MH's SPENT TRAVEL TIME
    SAUDI ARAMCO USE ONLY
    SAUDI ARAMCO TIP NUMBER SAUDI ARAMCO ACTIVITY NUMBER WORK PERMIT REQUIRED?

    SAUDI ARAMCO INSPECTION LEVEL CONTRACTOR INSPECTION LEVEL

    ITEM
    ACCEPTANCE CRITERIA REFERENCE PASS FAIL N/A RE-INSP DATE
    No.

    Vertical Tolerances - For straight compression structural members, the


    variation in straightness shall be equal to or less than 1/1000 of the axial
    12-SAMSS-008
    A1 length between points that are laterally supported.
    Sec. I
    (AISC, Code of Standard Practice for Steel Buildings and Bridges, Para.
    6.4.2 & PIP STS05130, Para. 6.2.1)

    The structure shall be plumbed, leveled, and braced before any final 12-SAMSS-008
    A2
    bolted or welded connections are made. (PIP STS05130, Para. 6.3.2) Sec. I

    Leveling plates, leveling nuts and washers and loose baseplates and
    bearing plates are set in its correct alignment and elevation. The
    12-SAMSS-008
    A3 variation in elevation relative to the established grade is equal to or less
    Sec. I
    than plus or minus 1/8" (3mm). (AISC Code of Standard Practice for
    Steel Buildings and Bridges, Para. 7.6, and PIP STS05130, Para. 6.4.1)

    Columns or structures with attached base plates are temporarily


    supported on leveling nuts, shims and other leveling devices and 12-SAMSS-008
    A4
    plumbed before grouting. (AISC Code of Standard Practice for Steel Sec. I
    Buildings and Bridges, Para. 7.7 & PIP STS05130, Para. 6.2.1)

    All column splices shall be field-bolted and conform to AISC Detailing for 12-SAMSS-007
    A5
    Steel Construction, Appendix D. Para. 6.2.5.20

    REMARKS:
    1. All survey and dimensional reports shall be recorded in the Structural Steel Alignment Report, SATR-M-2002 or equivalent.

    REFERENCE DOCUMENTS:
    1- 12-SAMSS-008 -- Erection of Structural and Miscellaneous Steel, 28 January 2004

    Contractor / Third-Party Saudi Aramco


    Construction Representative* PMT Representative
    Work is Complete and Ready for Inspection: T&I Witnessed QC Record Reviewed Work Verified
    Name, Initials and Date: Name, Initials and Date:

    QC Inspector PID Representative


    Performed Inspection Work / Rework May Proceed T&I Witnessed QC Record Reviewed Work Verified
    Name, Initials and Date: Name, Initials and Date:

    QC Supervisor Proponent and Others


    Quality Record Approved: T&I Witnessed QC Record Reviewed Work Verified
    Name, Organization,
    Name, Sign and Date:
    Initials and Date:

    *Person Responsible for Completion of Quality Work / Test Y = YES N = NO F = FAILED

    Page 1 of 1

    You might also like