Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 217 views

    Saic M 1060

    Uploaded by

    Hussain Nasser Al- Nowiesser
    This document is a checklist for inspecting glass and glazing installations and final inspections at Saudi Aramco. The checklist contains acceptance criteria for the installation inspection, including requirements for lock strip gaskets, frame tolerances, frame finishes, sharp edges, and installation environment. It also includes criteria for the final inspection such as glass cleaning and flashing/sealing. Representatives from the contractor, Saudi Aramco, and quality control must sign off on the inspection.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd

    Saic M 1060

    Uploaded by

    Hussain Nasser Al- Nowiesser
    217 views1 page
    This document is a checklist for inspecting glass and glazing installations and final inspections at Saudi Aramco. The checklist contains acceptance criteria for the installation inspection, including requirements for lock strip gaskets, frame tolerances, frame finishes, sharp edges, and installation environment. It also includes criteria for the final inspection such as glass cleaning and flashing/sealing. Representatives from the contractor, Saudi Aramco, and quality control must sign off on the inspection.

    Original Title

    SAIC-M-1060

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document is a checklist for inspecting glass and glazing installations and final inspections at Saudi Aramco. The checklist contains acceptance criteria for the installation inspection, including requirements for lock strip gaskets, frame tolerances, frame finishes, sharp edges, and installation environment. It also includes criteria for the final inspection such as glass cleaning and flashing/sealing. Representatives from the contractor, Saudi Aramco, and quality control must sign off on the inspection.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    217 views1 page

    Saic M 1060

    Uploaded by

    Hussain Nasser Al- Nowiesser
    This document is a checklist for inspecting glass and glazing installations and final inspections at Saudi Aramco. The checklist contains acceptance criteria for the installation inspection, including requirements for lock strip gaskets, frame tolerances, frame finishes, sharp edges, and installation environment. It also includes criteria for the final inspection such as glass cleaning and flashing/sealing. Representatives from the contractor, Saudi Aramco, and quality control must sign off on the inspection.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 1

    SAUDI ARAMCO ID/PID - 18-MAY-05 - REV 0 (Standards Cutoff - August 2004)

    SAIC NUMBER DATE APPROVED QR NUMBER


    SAUDI ARAMCO INSPECTION CHECKLIST
    Glass & Glazing Installation & Final Inspection SAIC-M-1060 18-May-05 CIVIL-
    PROJECT TITLE WBS / BI / JO NUMBER CONTRACTOR / SUBCONTRACTOR

    EQUIPMENT ID NUMBER(S) EQUIPMENT DESCRIPTION EQPT CODE SYSTEM ID. PLANT NO.

    LAYOUT DRAWING NUMBER REV. NO. PURCHASE ORDER NUMBER EC / PMCC / MCC NO.

    SCHEDULED INSPECTION DATE & TIME ACTUAL INSPECTION DATE & TIME QUANTITY INSP. MH's SPENT TRAVEL TIME
    SAUDI ARAMCO USE ONLY
    SAUDI ARAMCO TIP NUMBER SAUDI ARAMCO ACTIVITY NUMBER WORK PERMIT REQUIRED?

    SAUDI ARAMCO INSPECTION LEVEL CONTRACTOR INSPECTION LEVEL

    ITEM
    ACCEPTANCE CRITERIA REFERENCE PASS FAIL N/A RE-INSP DATE
    No.

    A Installation Inspection

    Lock Strip gaskets shall be adequate to prevent crushing during insertion


    SAES-M-100
    A1 and resist permanent deformation when loaded.
    Sec. D
    (1997 UBC, Sec 2404.4.1 & .2)
    Frames for receiving glazing shall be within specified tolerances and not SAES-M-100
    A2
    out-of-square or out-of-plane. (1997 UBC, Sec 2404.1) Sec. D

    Surfaces of frames shall have a non-corrosive finish or be protected with SAES-M-100


    A3
    a non-corrosive coating. (1997 UBC, Sec 2404.4.1 & .2) Sec. D

    No sharp edges on corners shall be permitted unless protection is SAES-M-100


    A4
    provided. (1997 UBC, Sec 2404.4.1 & .2) Sec. D

    Glazing shall be installed in a clean, dry, warm environment (above SAES-M-100


    A5
    210C). (1997 UBC, Sec 2404.4.1 & .2) Sec. D
    Where a gap exists between the gasket and window frame a
    SAES-M-100
    A6 supplementary wet elastomeric joint sealant may be used with approval
    Sec. D
    from Saudi Aramco. (1997 UBC, Sec 2404.4.1 & .2)

    B Final Inspection

    Glass surfaces shall be cleaned soon after installation and regularly if


    SAES-M-100
    B1 surrounding construction leaves deposits on the glass.
    Sec. D
    (1997 UBC, Sec 2404.4.1 & .2)
    Proper flashing and sealing shall be used to prevent water entering
    SAES-M-100
    B2 around the glass or window frame and the adjacent construction
    Sec. D
    material. (1997 UBC, Sec 2404.4.1 & .2)

    REMARKS:

    REFERENCE DOCUMENTS:
    1- SAES-M-100 -- Saudi Aramco Building Code, 29 January 2003
    2- 1997 UBC -- Uniform Building Code, 1 January 1997

    Contractor / Third-Party Saudi Aramco


    Construction Representative* PMT Representative
    Work is Complete and Ready for Inspection: T&I Witnessed QC Record Reviewed Work Verified
    Name, Initials and Date: Name, Initials and Date:

    QC Inspector PID Representative


    Performed Inspection Work / Rework May Proceed T&I Witnessed QC Record Reviewed Work Verified
    Name, Initials and Date: Name, Initials and Date:

    QC Supervisor Proponent and Others


    Quality Record Approved: T&I Witnessed QC Record Reviewed Work Verified
    Name, Organization,
    Name, Sign and Date:
    Initials and Date:
    *Person Responsible for Completion of Quality Work / Test Y = YES N = NO F = FAILED

    Page 1 of 1

    You might also like