102
102
102
SPECIFICATION FOR
READY MIXED PAINT, BRUSHING,
RED LEAD, NONSETTING, PRIMING
( Revised )
UDC 667.633.41:661.851.3
@I Copyright 1970
SPECIFICATION ~FOR
READY MIXED PAINT, BRUSHING; ’
RED LEAD, NONSETTING, PRIMING
(Revised )
Paints and Allied Products Sectional Committee, CDC 8
Chairman Representing
8SfBI P. C. CaAXDA Indian Paint Aviation, Caloutta
Memba
DB J. 8. AOOABWU; Counoil of Soientiflo dt Indurtrial Reaelrroh
SEBI M. A. SIVA~UYBAN ( Alfcrnutc )
DmV. R. 8. ABW Union Carbide India Ltd, Caloutk
DE II. C. BIJAWAT ( Alternate 1
m RAMAKAITA BHATTA- Le+o and La6 Produots Seotional Committeo,
OHABYYA CD0 9, 461
8-x 8. K. Boer Government T-t House, Oakmtts
SEBI A. K. C~AUDHUBY Imperial Chemioal Induatrier ( India ) Private
Ltd, Oalonttcr
SEBI F. W. VIOL (Alternote)
DB~~TY DXBBCTOB RMEABOH Railway Board ( Yinirtry of Railways )
(M&C)
DB A. S. BEADVRI ( Altermarc )
8mx B. PJ. GAN~ULI Minirtry of Defenoa ( R & D )
SEBI 8. RAYABADBAX ( AfIernute )
SEE18. 8. IL OHOl3E D. Waldie k CO Ltd, Celoutta
&XII SoniL GUPTA ( Altermale )
Da R. GONOALVX~ Burmeh-Shell Oil Storage and Dietributing Co of
India Ltd, Bombay
SEBI C. J. HVOKETIFP( Ahernare )
SEBI T. K. 8. MANX Addiaonr Peintr and Ohemioala Ltd, Madnu
SEBI M. B. SATYANABA~ANA~( Altcrnole )
.SHBI P. 5. NA~A~U~DABAM Dire&or&e of Teehnicsl oF;grt & Produo-
tion ( Air ), Minist
SHBI R. VBLAYVDHAN NAIB Travenoore Titanium Y rodnot Ltd. Trivmdrum
SEBI M. G. GADOIL ( Aflernalc )
8~~18.8. NAYUDU So$a;A,~tin~6 Varnish Manuf8Utusing CO
( Contfnved on page 0 )
Comencr
Saar 8. 8. NAYUDU Indiun Paint Aeeooietion, Celoutta
hfetnberr
SEBI J. M. NADXABNI ( Alternafc to
Shri 8.8. Neyudu )
SHBI 8. K. B~BB Government Test House, Calcutta
SRBI B. N. G&!?~uLI ldinistry of Defence ( R & D )
DB K. G. KUDVA Indian Paint Aesocietion, Calcutta
Da P. K. BEANSAM ( Alrcrnare )
Sxzu 8. RAYANUIALY Rail way Board ( Ministry of Reilwaye )
CAPT B. P. SINHA Naval Headquarters
CAPT RAM NATE ( Alfrmute )
SHBI K. 5. VABADACHAB Ministry ,of Defence ( R I%D )
Convener
8HBr 8. K. Bona Government Test House, Cnlcutte
Members
SHBI P. K. ADHIXABI Indian Paint’Aseooietiqn. Calcutta,
SBBI 8. M. CHAPBAVABTY Indian Paint Amocietion, Calcutta
SHBI 5.8. NAY~JDU Indian Paint Association, Calcutta
SHBI 8. RAMANTJJAX Railway Board ( Ministry of Railways )
SHBI M. N. RAO Indian Paint Association, Calcutta
8mBI 8. N. ROY Ministry of Defence ( CGDP )
SPECIFICATION FOR
READY MIXEQ PAINT, BRUSHING,
RED LEAD, NONSETTING, PRIMING
(Revised)
0. FOREWORD
0.1 This revised Indian Standard was adopted by the Indian Standards
Institution on 19 July 1962, after the draft finalized by the Paints and
Allied Products Sectional Committee had been approved by the Chemical
Division Council.
0.2 This standard was first issued in 1950 and was based largely on the
interim co-ordinated draft, compiled with the assistance of therepresenta-
tives of manufacturers and of various departments and authorities of the
Government of India, by the Co-ordinating Subcommittee of the No. 5
Standing-Committee on Specifications for Paintsand AlliedStores of the
General Headquarters, India (now Army Headquarters), Master General
of the Ordnance Branch, which was set up in 1942 and continued to
function till 1947. In the study for revision, ample consideration has been
given to compatibility of composition vis-a-vis performance tests and the
examination of all other anomalies. The present revision incorporates
all changes found necessary after the study and the results of
experience gained in the use of the earlier version of the standard during
the last decade.
0.2.1 Full alignment of JSS 3006 Specification- for Paint, PFU,
Priming, Red-lead, Nonsetting, Brushing, issued by the Department of
Standardization, Ministry of Defence, Government of India, has also
been achieved with this Indian Standard as it fully covers the require-
ments prescribed in JSS 3006.
0.3 This standard is one of a series of Indian Standard specifications on
ready mixed paint primers. Other specifications published so far in the
series are:
IS : 103-1962 READY MIXED PAINT, BRUSHINO, WHITE LEAD, FOR
PRIMINGAND GENERALPURPOSES( Revised )
IS : W-1962 R@ADY MIXED PAINT,BRUSHINO,ZINC CHROYE,PRZXZNO,
FOR USE ON ALUMINIUMAND LIOHT ALLOYS ( Revised)
3
IS : 106-1962 READY MX~IEDP#~T, BRUIUUNO, PRININO, FOR ENAUBLB,
FOR USE ON WOOD ( Revised)
*IS :109-1950Rskpy Mxxx,~ PAINT,, B~UEHINO,Pst&ao, PLAZXBR,
TO IS COLOUR No. 361 L&XT STONB
3s :2074-1962 RPADY MIND PAINT, RED OXID~ZENG CHROME,
PRSXIN~( SUPERWDINOIS : 107-1952 AND IS : 108-1952)
IS : 2075-1962READY MIXED PAINT, STOVINO,. RED OXIDE-ZINC
CHROME PRIMING ( SUPERSEDINGIS : 135-1952 AND IS:136-1952)
1. SCOPE
1.1This standard prescribes the requirements and the methods of test for
the material commercially known as ready mixed paint, brushing, red
lead, nonsetting, priming. The material is used for the protection of
structural steelwork.
2. TERMINOLOGY
2.1 For the purpose of this standard, the definitions given in *IS : 1303~
1958 Glossary of Terms Relating to Paints and 71s : 101-1961 Methods of
Test for Ready Mixed Paints and Enamels ( Revised) shall apply,
3. SAMPLING ,
3.1 The supplier shall submit a tender sample packed in three different
containers each containing not less than 0.5 litre of the material.
3.2 Representative samples of the material shall be drawn as prescribed
in 3 of tIS : 101-1961 Methods of Test for Ready Mixed Paints and
Enamels ( Revised ).
*Since revised.
tSecond revision in 1964.
4
4.1 compo#itioIl - The material shall consist of *the ingredients miked
in the proportions, by weight, speci6ed below:
Red lead, nonsetting, ( conform- Not less than 77 percint and
ing to Type C of *IS: 57-1950) not more than 82 percent
Dis+sing agent Not more than one percent
Oil -of turpentine ( conforming
to IS : 533.1954)
Not more than’ 5 percent
Petroleug hydrocarbon solvents . including that introduced
(conforming to *IS : 1745-1961) with driers
A mixture’:f both
Linseed oil, raw ( conforming to
*IS : 75-1950)
*IS : 101-1961 Methods of Tart for Ready Mixed Paints and Enamels ( Revised)
( &oo* revision in 1994 ).
5. TESTS
5.1 Tests shall be conducted as prescribed in *IS : 101-1961 Methods of
Test for Ready Mixed Paints and Enamels ( Revised ). References to the
relevant clauses of that standard are given in co1 4 of Table I and in 4.3
to 4.5.
5.2 Quality of Reagents - Unless otherwise specified, pure chemicals
and distilled water [see IS : 1070-1960 Specification for Water, Distilled
Quality (-Revised) ] shall be employed in tests.
NOTE-~ Pure ohemicels ’ shell mean ohemioals that do not contain impuri-
ties which sffeot the results of analysis.
6
I!9: 1e2- wf
6.3 Other details of packing and marking shall be in accordance with the
instructions given by the purchaser, subject to the condition given in 6.3.1.
6.3.1 Each container in which the material is supplied shall be legibly
and indelibly marked ‘ LEAD PAINT ’ in black or white letters which-
ever colour is more prominent, the letters being not- less than 25 mm
high.
6.4 The material when intended for defence purposes, shall be packed
and marked in accordance with Indian Standard code of practice for
packing and marking of packages of paints, varnishes, enamels and
allied productst.
( Revised )
( C1)t.J u )
Reprography Unit, BIS, New Delhi, India