Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

Cummins Engine Datasheet: Engine Model 6Btaa5.9-G2 Performance Curve FR 9266-03

Download as pdf or txt
Download as pdf or txt
You are on page 1of 5

CUMMINS ENGINE DATASHEET

ENGINE MODEL:6BTAA5.9-G2

PERFORMANCE CURVE:FR 9266-03

CUMMINS engine 6BTAA5.9-G2 www.wme.cn/CUMMINS/


ENGINE MODEL FREFORMANCE CURVE
6BTAA5.9-G2 FR 9266-03
ENGINE DATASHEET—for G-drive
ENGINE FAMILY CPL
2005/12
D40 8541
Displacement 5.9 L Air intake way Air-air after-cooled, turbo-charged
Cylinder bore 102 mm Cylinder quantity 6 kW(BHP) @RPM
Stroke 120 mm 120(161) 1500
Fuel system PB pump _ GAC governor / BYC ASIMCO Speed-droop 5%
Engine testing with fuel system, water pump and oil pump, without air compressor, alternator, fan, other options and driving accessory.
Testing condition:air intake resistance 250 mmHg, exhaust back pressure 50 mmHg.

Engine Standby Power Base Output Power Continuous Power


Speed-RPM kW HP kW HP kW HP
1500 130 174 120 161 96 129

Output Power Fuel consumption


% kW HP g/kW.h L/h 40

Fuel consumption (L/h)


Standby Power
30
100 130 174 215 34
Base Output Power
20
100 120 161 208 30
75 90 121 212 23 10
50 60 80 219 16
25 30 40 245 9 0
Continuous Power 0 30 60 90 120 130
Output Power (kW)
N/A 96 129 206 24

CUMMINS engine 6BTAA5.9-G2 www.wme.cn/CUMMINS/


ENGINE MODEL FREFORMANCE CURVE
6BTAA5.9-G2 FR 9266-03
ENGINE DATASHEET—for G-drive
ENGINE FAMILY CPL
2005/12
D40 8541

Typical engine data


Net weight kg 411
Rotate part instantaneous inertia _ without flywheel kg.m2 0.25
Distance between gravity center and rear surface of cylinder block mm 544
Distance between gravity center and center line above of crankshaft mm 155

Engine installation
Static bent torque permitted—rear surface of cylinder block N.m 1356
Static bent torque permitted—front surface of cylinder block N.m 435
Static bent torque permitted—flank surface of cylinder block N.m 365

Exhaust system
Max. back pressure mmHg 76
Diameter of exhaust pipe recommended mm 75

Air intake system


Max. air intake resistance
Dirty filter mmH2O 635
Normal air cleaner and clean filter mmH2O 254
Heavy duty cleaner and clean filter mmH2O 381
Diameter of intake pipe recommended mm 100

Lubrication system
Normal oil pressure range

CUMMINS engine 6BTAA5.9-G2 www.wme.cn/CUMMINS/


Low idle kPa 207
Rated speed kPa 345
Max. oil temperature permitted in oil pan ℃ 121
Oil pan capacity (Max _ Min) L 14.2_12.3
Lubrication system Min. capacity (oil pan + oil filter) L 16.4
Usage inclining degree permitted (any direction) ° 40

Fuel system
Fuel injection pump model PB pump _ GAC governor / BYC ASIMCO
Max. fuel input resistance of transfer pump mmHg 102
Max. overflow fuel resistance at overflow pipe of injector mmHg 254
Total fuel overflow amount L/h 30

Cooling system
Coolant capacity-engine only L 9.9
Max. coolant cycling resistance exterior engine kPa 28
Thermostat adjusting temperature (range) ℃ 82_95
Min. opening pressure of radiator cap kPa 69
Max. coolant temperature permitted _ Standby Power/Base output Power ℃ 104/100

Electric system
Starter 12V 24V
Battery charging system 63A 40A
Max. starting circuit resistance 0.00075Ω 0.002Ω
Min. battery capacity_ -12℃ (CCA:Cold Cranking Ampere) 800CCA 400CCA

Technical data _ under standard fuel delivery rate FR 9266-03 Base output Power Standby Power
Engine speed _ RPM 1500 1500
Output Power _ kW 120 130

CUMMINS engine 6BTAA5.9-G2 www.wme.cn/CUMMINS/


Torque _ Nm 764 828
Low idle _ RPM 750-850 750-850
Friction energy output _ kW 12.7 12.7
Piston speed _ m/s 6.0 6.0
Engine coolant flow _ L/sec 2.0 2.0
Air intake flow _ L/sec 135 145
Exhaust flow _ L/sec 293 324
Exhaust temperature _ ℃ 481 495
Environment energy output _ kW N/A N/A
Coolant energy output _ kW 45 50
Fuel energy output _ kW N/A N/A

All data’s error within ±5%.

Excuse for none notice anymore in case of data changed

CUMMINS engine 6BTAA5.9-G2 www.wme.cn/CUMMINS/

You might also like