2011 Dbi-Sala Catalog

YOUR
NERVE.
OUR
GEAR.
T H E U LT I M AT E I N FA L L P R O T E C T I O N F U L L L I N E C ATA L O G 2011
IT’S THE GEAR YOU WANT, DBI-SALA™ is known as the premier brand of
fall protection and rescue products around
the world. For more than 65 years DBI-SALA™
BECAUSE has provided, and still provides today, the

best solutions for workers at height, no matter
which industry you work in.
GUYS LIKE YOU We understand that you risk your life

every day, while making a living for
HELPED US
yourself and your family. We know that it
only takes one slip late in the shift to change
your life. If this happens, be sure you’re
DESIGN IT.
wearing the best, so you make it home
safely at the end of the day.
DBI-SALA™ equipment is legendary

for its comfort, ease of use, adjustability,
durability and reliability. We offer more than
15,000 equipment choices — the broadest
line of fall protection gear on the planet.
From flame resistant Kevlar®/Nomex®
harnesses and specialized, sealed self
retracting lifelines to customized, confined
space and horizontal systems, you get
gear that’s made for you. Every DBI-SALA™
product carries a 100% satisfaction
guarantee and a lifetime warranty.
Finally, our job isn’t done until you know

how to use the gear we make. In-house and
on-site training are priorities with us. When
we exceed worker expectations, you exceed
jobsite expectations!
T H E U LT I M AT E I N FA L L P R O T E C T I O N W W W.C A P I TA L S A F E T Y.CO M
THE ABC’S OF FALL PROTECTION
LIFETIME WARRANTY
A typical Personal Fall Arrest System (PFAS) incorporates DBI-SALA™ products are warranted for
three components often described as the ABC’s of fall their entire lifetime, to be free from defects
protection. The anchorage/anchorage connector, body support
in materials and workmanship, under normal
and connecting device, when used together, form a complete
use and conditions. Our warranty extends
system for maximum worker protection. But don’t forget about
from the product’s original date of purchase,
another required component of any fall protection program —
the descent, rescue and retrieval of a fallen worker.
in new or unused condition, from any
authorized DBI-SALA™ brand distributor
and applies exclusively to the product’s
end user. For detailed warranty information,
A ANCHORAGES
are a secure point of attachment. Anchorage connectors vary
by industry, job, type of installation and structure. They must be
see www.capitalsafety.com.
C
able to hold fast under more than a ton of force generated in a fall.
TABLE OF CONTENTS
CONNECTORS
FULL BODY HARNESSES 16-37
such as shock absorbing lanyards or self
BELTS, WORKSEATS & ACCESSORIES 38-39
retracting lifelines connect a worker’s harness
to the anchorage. SHOCK ABSORBING LANYARDS 40-49
POSITIONING LANYARDS 50-51
SELF RETRACTING LIFELINES 52-63
B BODY SUPPORT VERTICAL SYSTEMS 64-75
D
harnesses distribute fall forces over the upper thighs, pelvis,
chest and shoulders. They provide a connection point on the HORIZONTAL SYSTEMS 76-89
worker for the personal fall arrest system. DESCENT AND RESCUE
devices are used to retrieve an injured worker ANCHORAGE CONNECTORS 90-101
or lower him to the ground.
CUSTOM ACCESS SOLUTIONS 102-109
CONFINED SPACE RESCUE 110-135
RESCUE AND DESCENT 136-143
NETTING AND GUARDRAIL SYSTEMS 144-151
4 5
WE’VE WORKED
IN YOUR INDUSTRY
FOR DECADES.
DBI-SALA™ people climb the rigs in the oil and gas
fields. We straddle I-beams on construction sites.
We attend tool-box safety discussions with
transportation personnel at 5 a.m. And we review tie-off
challenges on top of a nacelle hundreds of feet in the
air, with wind industry workers. Our people work
hard to understand your job, concerns and challenges
before we design your equipment. That’s how DBI-SALA™

goes beyond compliance to produce the broadest,
most innovative, high quality fall protection
equipment for the world’s most vital industries.
WIND ENERGY
DBI-SALA™ has been a supplier of
choice to the wind industry. We
developed specialized ExoFit NEX™
harnesses and Force2™ lanyards,
as well as unique rescue and escape
systems such as the Rollgliss™ R500.
Our Lad-Saf ™ ladder safety systems, offered in both
standard and powered climb assist styles, are trusted by
wind professionals globally.
TRANSPORTATION
We’ve developed dozens of
specialized products, from evolution™
horizontal systems for railcar loading,
to FlexiGuard™ custom access
solutions for semi-truck servicing.
We’ve even designed a patented
fall-arrest-rated vacuum anchor system for aviation workers.
6 7
WE’VE BEEN CONSTRUCTION
DBI-SALA™ understands that there’s no more complex work environment
WHERE YOU’RE
than a construction site. We work closely with contractors to help us
fine tune our design on key products, such as the Saflok MAX™
hook, used
GOING.
widely
today on
concrete forms. We listened to steel erectors and created
shoulder caps that protect the webbing on our Exofit NEX™
harnesses. EZ-Line™ is today’s most user-friendly horizontal
lifeline system and the world’s only retractable design. Our
industry-first, twin-leg Talon™ self retracting lifeline provides
100% protection and mobility.
GENERAL INDUSTRY
DBI-SALA™ knows that every day thousands of manufacturing and facility workers around the
world don safety boots and goggles, then head out to do their job. Whether you’re processing,
milling, finishing, inspecting or doing routine maintenance, DBI-SALA™ has the products you
want. We’ve developed specialty Advanced confined space equipment, tie-back Talon™
self retracting lifelines, ExoFit NEX™ harnesses, ShockWave™ lanyards, Lad-Saf ™ ladder
safety systems and innovative guardrail and netting solutions.

OIL AND GAS
DBI-SALA™ was the first to bring “retractable” lifeline technology to the world in the
1940s and the first to bring “sealed retractable” technology to the oil and gas fields.
UTILITY, TELECOM AND MUNICIPALITIES
We were the first to test our products to -55°F and meet the IP68 seal rating.
DBI-SALA™ has been proactive in developing
And we developed specialized equipment and training
equipment for these unique industries. Our
for a wide array of emergency escape devices.
innovations include speciality Advanced confined
space equipment, Cynch-Lok™ and Saflok™ Pole

MINING Anchors and Kevlar®/Nomex® constructed arc
DBI-SALA™ developed harnesses for specialized miners
flash products, including the first arc flash self
gear and FlexiGuard™ systems to protect them while
retracting lifeline.
doing maintenance on oversized mining industry trucks.
8 9
OUR SITE OR YOURS. TRAINING ANYTIME, ANYWHERE.
WHERE SAFETY
AND SERVICE COME
FULL CIRCLE.
FALL PROTECTION
AWARENESS
DEMONSTRATIONS
Our North American fleet
of more than 40 specialized
vehicles can bring on-site,
hands-on fall protection
demonstrations to your
OPEN ENROLLMENT COURSES
workforce. We demonstrate
are designed to a standard that ensures
ON-SITE TRAINING actual drop-tests with force
Workers’ lives are on the line every day, but ensuring you are trained competently.
For greater flexibility, Capital Safety can bring standard courses, or measuring instruments so
their safety starts long before the job begins. No one • COMPETENT PERSON a customized version, directly to your location. We will provide the workers are familiar with
necessary equipment and trainers required for your class size. A
understands this better than Capital Safety. Our • COMPETENT PERSON TRAINER the arresting forces they may
mobile training trailer, with climbing structure, will be available by
training is based on 65 years of expertise and jobsite experience during a fall.
• COMPETENT INSPECTOR summer 2011, for added hands-on training at any customer site.
This provides an excellent
implementation around the globe. • PROGRAM ADMINISTRATOR
introduction to fall protection.
• COMPETENT CLIMBER & RESCUER
When it comes to protecting your work site, we deliver. We • AUTHORIZED PERSON INDUSTRY-SPECIFIC AND CUSTOM COURSES
offer superior courses in world-class training facilities, based • QUALIFIED PERSON In addition to basic courses, we offer courses for particular trades and specific
industry work requirements. These include: Oilfield Rig Workers Awareness, Rig
on standard curriculums or custom programs specific to • COMPETENT PERSON REFRESHER
Rescue, Tower Climbing/Rescue, Confined Space Entry and Retrieval and more.
your jobsite. Our comprehensive training provides practical, • WIND ENERGY COMPETENT RESCUER We’ll also customize courses.
hands-on experience, including: scaffolding, fixed ladders, • WIND ENERGY COMPETENT
RESCUER TRAINER
towers, sloped roofs, rebar walls, elevated catwalks, I-beams
• CONFINED SPACE ENTRANT/SUPERVISOR
and confined spaces. Every course we offer exceeds industry
• CONFINED SPACE RESCUE
standards set by OSHA, MSHA, ANSI, CSA and CE.
• CONFINED SPACE TRAINER
10 11
i-Safe™ is an intelligent safety system. It uses Radio
Frequency Identification (RFID) to maximize the
THE MOST effectiveness and minimize the total cost of your
safety program.
ADVANCED i-Safe™ allows you to easily record and access information on inspections, inventory and use. It tracks equipment
WAY TO assignments by worker or location. The system also automates the inspection process, with preloaded templates
and other tracking information.
TRACK SAFETY There are multiple system

options available — using a web
portal or versions that can be
EQUIPMENT stored on your own equipment

or behind your own firewall.
AND MANAGE This allows for easy access

and time-saving information
management. In addition,
YOUR SAFETY mobile devices are supported

for in-the-field, on-site
inspections. Almost all new DBI-SALA™ fall protection products are delivered from the factory already RFID-enabled.
INSPECTION Retrofit tags are also available to outfit existing inventory and other safety equipment. Whether you’re responsible
for a single construction site, a manufacturing plant or a series of oil rigs, i-Safe™ makes it easier to manage your
PROGRAM. safety inspection program.
i-SAFE™ 3.0 NOW WITH MULTIPLE INTEGRATION OPTIONS

• Updated inspection status of each piece of equipment X X X
• Tracks location and controls distribution of equipment

• Provides complete, documentable proof of compliance
i-Safe™ Tag Handheld Data Portal Tag Kits
• Offers multiple standard and customizable system software solutions i-Safe™ tags are standard RFID Reader Information is then linked with the Easy do-it-yourself tag kits are
equipment on most DBI-SALA™ Tags can be read in the field with web portal or stand alone system available for all types of equipment,
products. Each tag is programmed the handheld RFID reader, then to ensure up-to-date asset status. including harnesses, lanyards and
INSPECTION TRACKING INVENTORY CONTROL INFORMATION MANAGEMENT with its unique ID that registers synced with the full system back You also have access to related SRLs — allowing you to extend the
• Enhance user safety with up-to-date • Tracks inventory on sites around the globe • Real-time updates ensure accurate its model type and history. in the office, allowing for on-site safety and equipment information, benefits of your i-Safe™ system to
inspection logs • Paperless, accurate asset management equipment status i-Safe™ 3.0 utilizes high inspections. Easy-to-use interface training records, product advisories your entire inventory, regardless of
• Verification system promotes compliance • Easy information retrieval, inventory control • Instant access to key information frequency (13.56 MHZ) module allows complete asset visibility. and other useful links. brand or asset type.
• Electronic record for traceability and audit streamlines logistics, safety management tags supporting ISO 15693.
• Helps to mitigate theft
• Multiple reporting options available • Accountability by logging product, inspection
status, by job
12 13
Choose the i-Safe™ product that’s right for you.
This chart allows you to identify the i-Safe™ system that best satisfies your needs for today and the future.
i-Safe™ 3.0 Web i-Safe™ 3.0 Web i-Safe™ 3.0 i-Safe™ 3.0
Feature/Description
Limited Edition Pro Edition Desktop Edition Network Edition
Very Small Small Small - Medium Large

Target Customer Organizations Organizations Organizations Organizations
No IT Minimal IT Minimal IT Extensive IT
Capital Safety Capital Safety End-User End-User
Data Location
Hosted Site Hosted Site Internal PC Network
Assets Tracked 250 (1) Unlimited Unlimited Unlimited
Pre-defined Inspection Templates - Fall Protection Yes Yes Yes Yes
Pre-defined Inspection Templates - Other No Optional Optional Optional
Number of Hand-Held Computers Supported Optional (1) Optional Optional Optional
Smartphones and Other Mobile Platform Portals Supported No Optional Optional Optional
Email Alerts None Optional Optional Optional
Email Offers None Optional Optional Optional
Reports 5 10 (Plus Optional) 20 (Plus Optional) 20 (Plus Optional)
Certificates, Filters, & Inspections Yes Yes (Plus Optional) Yes (Plus Optional) Yes (Plus Optional)
Process Customization None None Optional Optional
Software Customization None Minimal Optional Full Optional Full Optional
High Frequency RFID (HF-RFID) Tag Scanning Supported Yes Yes Yes Yes
HF-RFID Tags Included on All DBI-SALA™ Products Yes Yes Yes Yes
SOFTGOODS TAG Barcode Scanning Supported No Optional Optional Optional
Handheld Computers Available from Capital Safety (HF-RFID) 3 Models 3 Models 3 Models 3 Models
Handheld Computers Available from Capital Safety (RFID/Barcode) 1 Model 1 Model 1 Model 1 Model
Basic Included in Basic Included in

Basic Included in
Remote Support Minimal Maintenance, Maintenance,
Maintenance
Additional Optional Additional Optional
On-Site Installation Support None None Optional Optional

UNIVERSAL HARDGOODS TAG
On-Site Training None Optional Optional Optional
Desktop/Network Software Investment Free Annual Fee One Time Fee One Time Fee
9000099 i-Safe™ Reader 9000101 i-Safe™ Reader
Handheld Computer Software Investment N/A Annual Fee One Time Fee One Time Fee
9505838 Kit, Hardgoods Tag, 6 pack with Zip Tie, Adhesive Pad, and Key-Ring
Software Support and Maintenance Fee N/A Included Annual Fee Annual Fee
9505839 Kit, Hardgoods Tag, 25 pack with Zip Tie, Adhesive Pad, and Key-Ring
9505840 Kit, Softgoods Tag, 6 Pack, with Zip Ties Handheld Computer Software Support and Maintenance N/A Included Annual Fee Annual Fee
9505841 Kit, Softgoods Tag, 25 Pack, with Zip Ties Handheld Computer Hardware Maintenance Agreement N/A Annual Fee Annual Fee Annual Fee
9505843 Kit, Cable Tag, 4 Pack, with Round Ball Bumper
9000098 i-Safe™ Reader, Psion WAP G3, HF with Docking Station Notes: (1) DBI-SALA™ Assets Only
9000042 i-Safe Reader, Psion WAP, Docking Station Only
™
9000099 i-Safe™ Reader, Psion Ikon, HF with Docking Station

9000100 i-Safe™ Reader, Psion Ikon, Docking Station Only 9000098 i-Safe™ Reader
CALL DBI-SALA™ TODAY FOR AN i-SAFE™ 3.0 SOLUTION TAILORED TO YOUR NEEDS.
9000101 i-Safe™ Reader, Unitech, HF, with Docking Station
9000102 i-Safe™ Reader, Unitech, Docking Station Only
14 15
FULL BODY HARNESSES
JUST HOW A harness is your single most

important equipment choice.
IMPORTANT It affects your safety in many

different ways. But its design and
craftsmanship also have a direct
IS CHOOSING influence on your comfort,

confidence, productivity and
THE RIGHT versatility on the job.
DBI-SALA™ harnesses — ExoFit Nex™, ExoFit™ XP,
HARNESS?
ExoFit™ and Delta™ — have earned a reputation
for maximum comfort, freedom of movement and
ease-of-use, as well as launching innovations
such as the spring-loaded, stand-up back D-ring,
Delta™ No-Tangle pad and the Revolver™
torso adjusters.
Many of our harnesses can be used on most

jobs. DBI-SALA™ also manufactures harnesses
for specific uses within industries such as
Construction, Oil and Gas, Transportation,
Utilities/Telecommunications and Municipalities
and Wind Energy. General- and specific-use
harnesses will be identified on the
following pages.
All harnesses meet OSHA and ANSI standards,

including the stringent ANSI Z359.1.
16 17
FULL BODY HARNESSES
6 BOOK STYLE LABELS
Book style labels put product and inspection
T YPES OF HARNESSES
F U L L B O DY H A R N E S S E S
information at the workers’ fingertips.
CHOOSING Pages may include sizing, operating

instructions, inspection log, warning labels
DBI-SALA™ harnesses are available in different types, with
various features, depending on their intended use.
YOUR HARNESS and compliance information. These labels

promote quick inspection, compliance and safety.
MULTI-PURPOSE HARNESS
Look for quality in these features when 7 STITCHING This type typically includes extra
1
selecting your harness. Double box stitching provides maximum strength and durability. attachment points which allow work in
a variety of situations. The belt and pad
It’s sewn-in quality you can trust.
provide additional back lumbar support,
positioning rings and tool carrying options.
8 PADDING
1 DORSAL CONNECTION
Cushioned shoulder, leg and hip pads keep
The fall arrest point must be located
the pressure off, providing extra worker
on the back, positioned between
11 comfort for long hours of wear. In a fall, they
the shoulder blades. Your harness
absorb shock and help distribute your WORK POSITIONING HARNESS
must always include a dorsal
weight. They may be built-in to avoid These harnesses have positioning D-rings
attachment point. located on the hips for use with pole straps
slipping or may be removable.
or work positioning lanyards, which allow
2 WEBBING hands-free operation. Harnesses of this kind
9 SEAT SLINGS
Webbing is an important factor in the durability and may include integral waist belts.
A removable seat sling provides job versatility
safety of the harness. Ensure that the webbing is strong
3 and added comfort during long hours of use.
enough to endure rough use, exposure to sunlight and other
elements without tearing or fraying. Specialty applications
10 IMPACT INDICATORS
such as welding and electrical maintenance require 2 Impact indicators provide immediate notice
Nomex®/Kevlar® or nylon that offers fire resistance
that the worker and harness have been in a fall. LADDER CLIMBING HARNESS
or arc flash protection. Harnesses with a frontal attachment
This feature promotes safety and proper inspection.
point, for connection to permanent ladder
3 ADJUSTING POINTS safety systems.
11 LANYARD KEEPERS
Whether you wear a harness 4 hours a day or 8 A lanyard keeper provides a place to
14, it needs to fit right for safety and comfort.
park your lanyard when not in use.
Harnesses with adjusting points on the legs, waist
It prevents tripping and entanglement
(belt models), chest and torso allow a better fit.
for enhanced safety.
4 LEG STRAPS
12 BREATHABLE LININGS DESCENT CONTROL HARNESS
Depending on worker preference, leg strap fasteners These harnesses typically have frontal
The ExoFit™ series of harnesses feature
may be available in different styles, including: attachment points for use with descent
breathable linings that wick moisture
control devices.
7 away from your body, So you stay dry and
comfortable in heat or cold.
Tongue Buckle Pass Thru Buckle Quick Connect Buckle
5 PELVIC SUPPORT
CONFINED ENTRY/RETRIEVAL HARNESS
A sub-pelvic strap provides additional support, 4 Equipped with One attachment point located on each
security and comfort for the user. shoulder strap facilitates upright
Properly positioned, it better 5 retrieval from confined spaces.
distributes forces during a fall.
18 D B I - S A L A™ W W W. C A P I T A L S A F E T Y. C O M 800.328.6146 19
FULL BODY HARNESSES
• PROTECTIVE SHOULDER CAPS
Provide protection and comfort
The Ultimate Full Body Comfort Harnesses when carrying heavy materials. VEST-STYLE FULL BODY HARNESSES
Vest-style harnesses are the most universal, with multiple configurations and
ExoFit NEX™ harnesses are the • MOLDED LANYARD KEEPERS connection point options. They’re used across a wide variety of industries.
newest, most advanced harnesses in the Easy holstered snap hooks break
industry. They’re the culmination of our away to avoid trip hazard.
experience with ExoFit™ and ExoFit™ XP,
ongoing research and the incorporation • REFLECTIVE MATERIAL
of new materials and innovative features. For greater visibility in dark and
When you purchase an ExoFit NEX™ dangerous environments, reflective
harness, you can be certain that you’re material is integrated on legs, chest,
shoulders and back. 1113070
purchasing the finest harness available
today, from DBI-SALA™ or anyone else.
1113055 EXOFIT NEX™
EXOFIT NEX ™ VEST-STYLE HARNESS
• BUILT-IN CARRYING POCKET
COMFORT • True to our NEX mission, we Conveniently holds and protects a cell VEST-STYLE HARNESS Aluminum back and
manufacture these harnesses using materials phone, camera or other items. Aluminum back and side shoulder D-rings, locking
that won’t add unnecessary weight. D-rings, locking quick quick connect buckles.
connect buckles. (XLarge) (XLarge)
FUNCTION • When speed and efficiency
• REPEL TECHNOLOGY WEBBING 1113046 Small 1113061 Small
are project requirements, ExoFit NEX™ will
Water repellent to reduce attraction of mold
provide the freedom and confidence to and dirt – also has up to 5 times more 1113049 Medium 1113064 Medium
function at your maximum potential. abrasion resistance. 1113052 Large 1113067 Large
DURABILITY • ExoFit NEX™ harnesses
are designed using materials that last.
REVOLVER™ VERTICAL • 1113085

TORSO ADJUSTERS
Simple and fast adjustments that
1113040 EXOFIT NEX™
eliminate loose ends and lock into EXOFIT NEX ™ VEST-STYLE HARNESS
place, preventing slippage. 1113010 VEST-STYLE HARNESS
Aluminum front and back
Aluminum front,
back and side D-rings,
STAND-UP DORSAL D-RING EXOFIT NEX™ VEST-STYLE HARNESS
D-rings, locking quick locking quick connect
Patented spring-loaded design Aluminum back D-ring, locking quick
HYBRID COMFORT PADDING • connect buckles. (XLarge) buckles. (XLarge)
automatically stands-up, ensuring connect buckles. (XLarge)
Lightweight, moisture wicking and 1113031 Small
fast, easy and safe connections 1113076 Small
breathable padding won’t move or slip, 1113001 Small
always keeping the wearer comfortable. to your fall arrest system. 1113034 Medium 1113079 Medium
1113004 Medium
• 1113037 Large 1113082 Large
1113007 Large
TECH-LITE™ ALUMINUM D-RINGS • 420 LB.
Extremely lightweight alloy commonly CAPACITY
used in military and aerospace offers a
higher level of security and comfort. Model Shown 1113130
EXOFIT NEX™
CROSS-OVER STYLE
INTEGRATED TRAUMA STRAPS • HARNESSES
Provide an adjustable, continuous
loop for post fall, minimizing A front-mounted D-ring
suspension trauma. makes the cross-over
style ideal as a rescue
1113100 1113115
™
EXOFIT NEX EXOFIT NEX™
harness and for ladder
DUO-LOK ™ QUICK CONNECT BUCKLES • CROSS-OVER CROSS-OVER
climbing applications. STYLE HARNESS STYLE HARNESS
Lightweight one-handed use with
memory-fit web-lock ensures fast, Aluminum front and Aluminum front, back
non-slipping connections. back D-rings, locking and side D-rings, locking
Equipped with quick connect buckles. quick connect buckles.
SUPERIOR X-DESIGN (XLarge) (XLarge)
ULTRA-SOFT EDGING • A single piece of material in the 1113091 Small 1113106 Small
Moves with you. shape of an X wraps around the
Doesn’t rub or chafe. wearer for the ultimate in comfort, 1113094 Medium 1113109 Medium
security and no-tangle donning. 1113097 Large 1113112 Large
FULL BODY HARNESSES
EXOFIT NEX™
GLOBAL WIND ENERGY HARNESSES
EXOFIT NEX™ Our wind industry harnesses meet global compliance standards:
TOWER CLIMBING HARNESSES ANSI, OSHA, CSA and CE.
Tower climbing models are built to keep
workers comfortable during extended
hours in harness. Tool loops are ideal
for carrying equipment. 1113218
EXOFIT NEX™
GLOBAL WIND
1113193 ENERGY HARNESS
EXOFIT NEX™ TOWER Aluminum front, back and
CLIMBING HARNESS side D-rings, locking quick
Aluminum front, back and side connect buckles and
D-rings, locking quick connect BACK VIEW
sewn-in hip pad with belt
buckles with sewn-in hip pad and and lumbar wear protection.
belt, removable seat sling with A removable seat sling (XLarge)
positioning D-rings. (XLarge) adds even more comfort, 1113215 Small
1113190 Small for those who wear them
1113216 Medium
1113191 Medium all day long.
1113217 Large
1113192 Large
EXOFIT NEX™
CONSTRUCTION STYLE HARNESSES Made for general construction
work, these harnesses have excellent tool-carrying capability, sewn-in
hip pad and removable body belt.
REPLACEABLE LUMBAR
PROTECTOR The lumbar protector is
easily replaced in the field when worn
1113213
Protective hip padding loops prevent
or damaged. EXOFIT NEX™
equipment pouches from sagging and
reduce abrasion in vulnerable areas.
GLOBAL WIND
RADIO HOLSTER ENERGY HARNESS
Conveniently Aluminum front, back
holds and and side D-rings, locking
Easily adjusted
protects a radio,
tongue buckle quick connect buckles.
cell phone, or
body belt. (XLarge)
other item like a
Lad-Saf ™ sleeve. 1113210 Small
See page 39 for details.
1113211 Medium
BACK VIEW 1113212 Large
EXOFIT NEX™
MINERS’ HARNESSES
1113160 Our miners’ harnesses are
1113130 EXOFIT NEX™ made with belts constructed 1113199
EXOFIT NEX™ CONSTRUCTION specifically to hold equipment EXOFIT NEX ™
CONSTRUCTION STYLE HARNESS carried by miners. MINER’S HARNESS
STYLE HARNESS Aluminum front, back Aluminum back D-ring,
Aluminum back and side and side D-rings, locking locking quick connect buckles,
D-rings, locking quick quick connect buckles, integrated hip padding with
connect buckles with sewn-in hip pad, belt and miner’s equipment
sewn-in hip pad, removable belt. straps. (XLarge)
removable belt. (XLarge) (XLarge)
1113195 Small
1113121 Small 1113151 Small
1113196 Medium
1113124 Medium 1113154 Medium
1113197 Large
1113127 Large 1113157 Large
BACK VIEW
FULL BODY HARNESSES
Vest-style harnesses are the most universal,
• CUSHIONED SHOULDER PADS with multiple configurations and connection
Keeps pressure off, absorbs shock,
point options. They’re used across a wide
helps distribute weight in a fall.
Designed so they won’t slip or
VEST-STYLE FULL BODY HARNESSES variety of industries.
Thee Secon
Second
n Generation Full Body
Comfort Harnesses slide off your shoulder.
• REFLECTIVE PIPING
ExoFit™ XP made its mark as the Enhances visibility in
industry’s most comfortable low-light conditions.
harness. Its design incorporates
a single piece of material that • INTEGRATED LANYARD KEEPERS
1110228 1110128
wraps around you in the shape of Prevent dangerous entanglements. EXOFIT™ XP EXOFIT™ XP
They snap free when snagged. VEST-STYLE HARNESS VEST-STYLE HARNESS
an X, for the ultimate in no-tangle
Back and side D-rings, Back D-ring, loops for
donning and comfortable security.
• SOFT, LIGHTWEIGHT WEBBING loops for belt, quick belt, tongue buckle legs.
Its padding can be removed and
Strong, yet isn’t stiff or coarse. connect buckles. (XLarge) (XLarge)
cleaned. XP materials are soft and
lightweight, yet extremely durable. 1110225 Small 1110125 Small
1110227 Large 1110127 Large
• 3-D MESH AND
BREATHABLE LINING
Allows moisture to evaporate and
cool air to circulate, keeping you
EASY-GRIP END TABS cool and dry.
AND KEEPERS •
For fast, efficient and secure
web adjustment.
1109728 1109753
EXOFIT™ XP EXOFIT™ XP
VEST-STYLE HARNESS VEST-STYLE HARNESS
1110103 Front and back D-rings, Front, back and side
EXOFIT™ XP VEST-STYLE HARNESS loops for belt, D-rings, loops for belt,
Back D-ring, loops for belt, quick quick connect buckles. quick connect buckles.
connect buckles. (XLarge) (XLarge) (XLarge)
STAND-UP DORSAL D-RING 1110100 Small 1109725 Small 1109750 Small
WITH IMPACT INDICATOR
It’s spring-loaded, ensuring fast, 1110101 Medium 1109726 Medium 1109751 Medium
easy and safe connections to a 1110102 Large 1109727 Large 1109752 Large
420 LB. lanyard or SRL.
•
REMOVABLE PADDING CAPACITY
Cleaning is easy. Just throw it in the washer.
Model Shown 1110103
EXOFIT™ XP
CUSHIONED LEG AND HIP STRAPS • CROSS-OVER STYLE
Comfort and additional security during a fall.
HARNESSES
A front-mounted
D-ring makes the
QUICK CONNECT BUCKLES • cross-over style ideal
Color-coded and provide one-handed for ladder climbing and
operation for fast, easy donning. rescue applications.
1109803 1110353
™
EXOFIT XP EXOFIT™ XP
ULTRA-SOFT EDGING •
Moves with you. CROSS-OVER CROSS-OVER
Doesn’t rub or chafe. STYLE HARNESS STYLE HARNESS
Front and back D-rings, Back, front, and side
loops for belt, quick D-rings, sewn-in hip pad
Equipped with connect buckles. and hip adjustments.
(XLarge) (XLarge)
SUPERIOR X-DESIGN 1109800 Small 1110350 Small
A single piece of material in the shape of an
X wraps around the wearer for the ultimate in
comfort, security and no-tangle donning. 1109802 Large 1110352 Large
FULL BODY HARNESSES
EXOFIT™ XP
EXOFIT™ XP ARC FLASH HARNESSES
CONSTRUCTION STYLE HARNESSES Made for general construction work, • Dorsal web loop option for no
metal connections XP arc flash harnesses are perfect for use in
these harnesses have excellent tool-carrying capability, a sewn-in hip
any industry where high voltage electricity
pad and removable body belt. • 7,000 lb. Nylon or Nomex®/Kevlar®
webbing options to meet your is a concern. That’s because all DBI-SALA™
different jobsite needs arc flash equipment has been tested to
perform in accordance with the stringent
• Flame resistant Nomex®/Kevlar®
fabric used in back, hip and ASTM F887-05 Standard Specification for
leg pads Personal Climbing Equipment.
• Leather insulator option behind

metal hardware reduces static Testing for fall protection is performed in two steps.
energy transfer The first exposes the equipment to an arc flash at
• PVC coated hardware option for 40 cal/cm2 and the second is a drop test compliant
non-conductive, non-sparking with ANSI Z359.1 after the exposure.
applications
1110153 1110178
EXOFIT™ XP EXOFIT™ XP
CONSTRUCTION STYLE HARNESS
Back D-ring, sewn-in back pad and belt
CONSTRUCTION STYLE HARNESS
Back D-ring, sewn-in back pad and belt
1110892
with side D-rings, quick connect buckles. with side D-rings, tongue buckle legs.
EXOFIT™ XP
ARC FLASH HARNESS
(XLarge) (XLarge)
Nomex®/Kevlar ® webbing,
1110150 SM 1110151 MED 1110152 LG 1110175 SM 1110176 MED 1110177 LG 1110842 PVC-coated hardware,
EXOFIT™ XP ARC FLASH HARNESS pass thru buckles, back
Removable Nomex®/Kevlar ® padding, 7,000 lb. and leg Nomex®/Kevlar ®
EXOFIT ™ XP 1110303 nylon web, back web loop, quick connect buckles,
back and leg Nomex®/Kevlar ® pads, leather
pads. (XLarge)
EXOFIT™ XP TOWER 1110893 Small
TOWER CLIMBING HARNESS insulators, rescue loops. (XLarge)
CLIMBING HARNESS 1110890 Medium
1110964 SM, 1110840 MED, 1110841 LG
Vest style, front and back D-ring, belt 1110891 Large
with back pad and side D-rings, removable
seat sling with positioning D-rings, EXOFIT XP™ ARC FLASH HARNESSES
quick connect buckles. (XLarge) X-LARGE SMALL MEDIUM LARGE
1110300 Small 1100942 1100943 1100940 1100941
1110301 Medium Nomex®/Kevlar® web, vest-style, back D-ring, Nomex®/Kevlar® back and leg pads, quick connect buckles. 1110852
1110302 Large EXOFIT ™ XP
1110845 1110849 1110843 1110844
Removable Nomex®/Kevlar® padding, 7,000 lb. nylon web, back web loop, quick connect buckles, rescue CONSTRUCTION ARC
loops, leather insulators, PVC coated back D-ring. FLASH HARNESS
Removable Nomex®/Kevlar ®
1110872 1110873 1110870 1110871
padding, 7,000 lb. nylon
Cross-over style, removable Nomex®/Kevlar ® padding, 7000 lb. nylon web, front and back web loop,
web, back web loop, quick
quick connect buckles, leather insulators.
connect buckles, leather
1110882 1110883 1110880 1110881 insulators, rescue loops
Construction style, Nomex®/Kevlar ® web and pads, back web loop, quick connect buckles, Kevlar ® and body belt. (XLarge)
pass thru body belt.
1110853 Small
1111303 1111300 1111301 1111302 1110850 Medium
Construction style, Nomex®/Kevlar ® web and pads, PVC coated back D-ring, quick connect buckles,
A removable seat sling adds even more 1110851 Large
Kevlar ® pass thru body belt.
comfort, for those who wear them all day long.
FULL BODY HARNESSES
Vest-style harnesses are the most universal, with
multiple configurations and connection point options.
• CUSHIONED SHOULDER PADS VEST-STYLE HARNESS They’re used across a wide variety of industries.
Help minimize pressure on shoulders.
Designed so they won’t slip or slide off
your shoulder.
The Industry’s First Comfort Harnesses
1108581 1109358
™
EXOFIT EXOFIT™
• BREATHABLE LINING VEST-STYLE HARNESS VEST-STYLE HARNESS
ExoFit is the design that Immediately draws moisture away, keeping Back and side D-rings, Back D-ring, loops for
changed what workers you dry and comfortable.
loops for belt, quick belt, tongue buckle legs.
expect from a harness. connect buckles. (XLarge) (XLarge)
1108575 Small 1109355 Small
It’s our original comfort fit harness, 1108576 Medium 1109356 Medium
with a single piece of material 420 LB.
1108577 Large 1109357 Large
that wraps around you in the shape of CAPACITY
an X. It dons without tangling and
provides comfortable security.
ExoFit remembers your adjustments. • EASY-GRIP END TABS 1108606
Snap three buckles and you’re ready Something secure to hang on to when 1108532 EXOFIT™
adjusting the straps. ™ VEST-STYLE HARNESS
to work. Shoulder, hip and leg EXOFIT
padding is built-in so it can’t slip. VEST-STYLE HARNESS Front, back and side
A breathable lining guarantees Front and back D-rings, D-rings, loops for belt,
you’ll stay dry and comfortable. loops for belt, quick quick connect buckles.
• ANTI-TEAR BALLISTIC NYLON connect buckles. (XLarge) (XLarge)
Abrasion-resistant for rugged
strength and durability. Twice 1108525 Small 1108600 Small
the endurance of standard 1108526 Medium 1108601 Medium
nylon or polyester. 1108527 Large 1108602 Large
REFLECTIVE PIPING
ULTRA-SOFT EDGING • Enhances visibility in 1107981 EXOFIT ™ VEST-STYLE HARNESSES
Moves with you. low light conditions. EXOFIT™ VEST-STYLE HARNESS X-LARGE SMALL MEDIUM LARGE
Doesn’t rub or chafe. • Back D-ring, loops for belt, quick
BACK D-RING connect buckles. (XLarge) 1108754 1108751 1108752 1108753
Keeps you upright every
1107975 Small Back and shoulder D-rings, loops for belt, quick connect buckles.
TORSO BUCKLES • time. 5,000 lb. minimum
Hold straps firmly in place, adjust tensile strength. 1107976 Medium 1109226 1109228 1109225 1109229
• Back, side and shoulder D-rings, loops for belt, quick connect buckles.
easily and complete the 5-point 1107977 Large
adjustment system. 1111428 1111425 1111426 1111427
Stainless steel hardware, back D-rings, loops for belt, quick connect buckles.
Model Shown
1107981
CUSHIONED LEG AND HIP STRAPS •
Comfortable and offer additional
security during a fall. EXOFIT ™
CROSS-OVER STYLE
HARNESSES
A front-mounted D-ring
makes the cross-over style
QUICK CONNECT BUCKLES • ideal for ladder climbing
Provide one-handed operation
for fast, easy donning.
and rescue applications. 1108682 1108706
™
EXOFIT CROSS-OVER EXOFIT™ CROSS-
STYLE HARNESS OVER STYLE HARNESS
Front and back Front, back and side
D-rings, loops for belt, D-rings, loops for belt,
Equipped with quickconnect buckles. quick connect buckles.
(XLarge) (XLarge)
1108675 Small 1108700 Small
1108677 Large 1108702 Large
FULL BODY HARNESSES
EXOFIT ™
WIND ENERGY HARNESSES
Our wind industry harnesses meet global compliance
EXOFIT ™ standards: ANSI, OSHA, CSA and CE.
CONSTRUCTION STYLE
HARNESSES
Made for general
construction work, these
harnesses have excellent 1110478
tool-carrying capability, EXOFIT™ CONSTRUCTION
a sewn-in hip pad and STYLE HARNESS
Back D-rings, sewn in hip
removable body belt.
pad and belt with side
D-rings, tongue buckle legs. Reinforced lumbar area for added
(XLarge) back support. Tool loops allow you
to keep your tools close at hand.
1110475 Small
1110476 Medium
Integrated trauma
1110477 Large straps minimize
1108507 EXOFIT™ CONSTRUCTION STYLE HARNESSES
suspension trauma
after a fall.
EXOFIT™ CONSTRUCTION
X-LARGE SMALL MEDIUM LARGE
STYLE HARNESS
Back D-ring, sewn-in 1108979 1108977 1108978 1108975
back pad and belt with Back and front D-ring, sewn-in back pad and belt with
side D-rings, quick connect side D-rings, quick connect buckles. 1102388
buckles. (XLarge)
1108519 1108516 1108517 1108518 EXOFIT™ WIND 1102343
1108500 Small Back D-ring, sewn-in back pad and belt with side ENERGY HARNESS EXOFIT™ WIND
1108501 Medium D-rings, quick connect buckles, 9504066 and Quick connect buckle legs, ENERGY HARNESS
1108502 Large 9504072 tool pouches. PVC coated front, back and Quick connect buckle
side D-rings, sewn-in hip legs, PVC coated front,
pad and belt with tool loops. back and side D-rings.
(XLarge) (XLarge)
1102385 Small 1102340 Small
EXOFIT ™ 1100303 1102386 Medium 1102341 Medium
DERRICK HARNESSES EXOFIT™ DERRICK HARNESS 1102387 Large 1102342 Large
These harnesses are designed Vest-style, back D-ring with 18" extension, belt
specifically for workers who operate the with back pad and back D-ring, soft seat
monkey and tubing boards on oil rigs. sling with positioning D-rings, pass thru buckle Excellent tool-carrying
They feature comfort and security, with
connections at shoulder for 1000570 derrick
capability. Extra tough
easy donning. These models include
belt. (XLarge) 1108657 tubular web encases
1100300 Small EXOFIT™ TOWER
connections for an optional derrick sub-pelvic webbing for
1100301 Medium CLIMBING HARNESS
belt, which provides comfort while added wear resistance
1100302 Large Front and back D-rings,
positioning for the next drilling pipe. belt with back pad and side for straddling beams.
Harness at left D-rings, removable seat sling
pictured with
with positioning D-rings,
1000570
quick connect buckles.
derrick belt
(XLarge)
1100533
EXOFIT™ IRON
WORKER’S HARNESS
Back D-ring, sewn-in back
pad and belt with side
D-rings, reinforced seat
straps, tongue buckle legs.
1000570 1108650 Small
(XLarge)
1100530 Small
EXOFIT™ DERRICK BELT 1108651 Medium
Positioning D-rings, pass thru buckles 1100531 Medium
1108652 Large
for harness connection. (Universal Size) 1100532 Large
FULL BODY HARNESSES
Vest-style harnesses are the most universal, with
multiple configurations and connection point options.
They’re used across a wide variety of industries.
VEST-STYLE HARNESSES
• REPEL™ WEBBING
Water repellent to reduce attraction 1102008 1102090
of mold and dirt – also has more DELTA ™
DELTA™
abrasion resistance. VEST-STYLE HARNESS VEST-STYLE HARNESS
Innovative, full body Side and back D-ring, Back and front D-rings,
support for more • LANYARD KEEPERS tongue buckle leg quick connect buckles.
Delta™ lanyard keepers hold your straps. (Universal Size) (Universal Size)
than two decades. unused snap hooks and help reduce 1102008 (pictured) 1102090 (pictured)
trip hazards. Tongue Buckles Quick Connect Buckles
New, improved Delta™ harnesses
1110625 1107807
combine “industry-first” Quick Connect Buckles Tongue Buckles
advancements with popular
1103875 1112126
features that have made Delta™ Pass Thru Buckles Pass Thru Buckles
the workhorse of the industry.
Today’s Delta™ represents more
• REVOLVER™ VERTICAL
than twenty years of design, TORSO ADJUSTER
research, manufacturing know-how Simple and fast adjustment that
and on-the-job performance. eliminates loose ends and locks into
place, preventing slippage.
1101781
DELTA™
Durable • Convenient • Comfortable VEST-STYLE HARNESS
Delta™ harnesses are as tough Back and shoulder
as those who wear them.
They have a shape of their own
STAND-UP
DORSAL D-RING
1102000 D-rings, pass thru
buckles. (Universal Size)
so you can don them quickly Patented spring-loaded DELTA™ VEST-STYLE HARNESS
1101781 (pictured)
design automatically Back D-ring, tongue buckle leg
and easily. And Delta™ supports Pass Thru Buckles
stands-up, ensuring straps. (Universal Size)
your back and hips while fast, easy and safe 1101254
bearing heavy loads. • connections to your 1102000 Tongue Buckles (pictured) Tongue Buckles
fall arrest system. 1110600 Quick Connect Buckles 1110602
1103321 Pass Thru Buckles Quick Connect Buckles
NO TANGLE DESIGN • DELTA™ VEST-STYLE HARNESSES

Defining the Delta™ name, the
patented triangular design creates a 1107813 Front and back D-rings, Hi-Vis web, loops for belt, quick connect buckles. (XLarge) (1107804 LG)
frame that allows the harness to
fall into place when donned. 1102001 Back D-rings, parachute adjuster leg straps. (Universal Size)
420 LB.
CAPACITY 1101828 Back D-rings, parachute adjuster leg straps, shoulder retrieval D-rings. (Universal Size)
Model Shown 1101656

1105400 Back and side D-rings, parachute adjuster leg straps. (Universal Size)
DELTA™ COMFORT HIP PAD •
Improved ergonomic fit constructed with 1104725 Back D-ring, with belt loops, non-conduct/sparking hardware, pass thru buckle leg straps. (Universal Size)
a soft, breathable, comfortable interior
that supports your back and hips.
TECH-LITE™ QUICK •
CONNECT BUCKLES
Lightweight aluminum alloy buckles
for fast and easy connections.
Equipped with
IMPACT INDICATOR •
Provides visual alert that the harness has been
involved in a fall and for safety inspections.
32 33
FULL BODY HARNESSES
1106452 (pictured) 1107778 (pictured)
DELTA™ IRON WORKER’S HARNESS DELTA™ TOWER
DELTA™ Vest-style, back D-ring, adjustable belt CLIMBING HARNESS
Vest-style, front and back D-ring,
CONSTRUCTION STYLE support straps with clips, body belt with
HARNESSES permanently attached pad, shoulder pads, belt with 4" wide pad and side
accessory clips, wear layer web on seat D-rings, two tool pouch
Made for general construction D-rings, seat sling with
sling, pass thru leg straps. (XLarge)
work, these harnesses
have excellent tool-carrying
1101656 1106453 SM 1106451 MED 1106550 LG positioning D-rings, tongue
buckle legs. (XLarge)
DELTA™ CONSTRUCTION
capability, a sewn-in hip pad and STYLE HARNESS 1107776 SM 1107777 MED 1107775 L G
removable body belt. Vest-style, back and side
1106408
D-rings, belt with sewn-in DELTA™ IRON WORKER HARNESS
Vest-style, back D-ring adjustable belt
1103352
back and shoulder pads, DELTA™ TOWER CLIMBING HARNESS
tongue buckle leg straps. support straps with clips, body belt with
Cross-over style, front D-ring, belt with 4" wide pad
(XLarge) permanently attached pad, shoulder pads,
and side D-rings, two tool pouch D-rings, seat sling
accessory clips, wear layer web on seat
1102201 Small with positioning D-rings, tongue buckle legs. (XLarge)
sling, tongue buckle leg straps. (XLarge)
1110578 1101654 Medium
1106403 SM 1106404 MED 1106405 LG
1103355 SM 1103351 MED 1103350 LG
1101655 Large
DELTA™ CONSTRUCTION
STYLE HARNESS Arc flash harnesses are perfect for use in any industry where high voltage electricity is a concern.
Back and side
D-rings, quick
DELTA™ CONSTRUCTION STYLE HARNESSES
DELTA™ That’s because all DBI-SALA™ arc flash equipment has been tested to perform in accordance with
the stringent ASTM F887-05 Standard Specification for Personal Climbing Equipment.
connect buckle legs and 1107809 Front, back and side D-rings, belt and hip pad, tongue buckle leg. ARC FLASH HARNESSES
chest strap, belt with 1107805 SM 1107802 MED 1107801 LG 1107809 XL
sewn-in back pad. 1103513 Back D-ring, pass thru buckles, loops for belt. (Universal Size)
(XLarge)
1103512 Back and side D-rings, pass thru buckles, loop for belt. (Universal Size)
1110782
1110575 Small DELTA™ ARC
1110576 Medium 1102526 Back D-ring, tongue buckle legs, loops for belt. (Universal Size) FLASH HARNESS
1110577 Large 1102025 Back and side D-rings, tongue buckle legs, loops for belt. (Universal Size)
7,000 lb. nylon web, back
web loop, quick connect
1110830
buckles, leather insulators,
DELTA™ ARC
FLASH HARNESS
rescue loops. (XLarge)
Nomex®/Kevlar ® web, PVC
1110788 Small coated hardware, back
DELTA™ 1110780 Medium D-ring, pass thru leg straps.
CROSS-OVER STYLE 1110781 Large (Universal Size)
HARNESSES
A front-mounted
D-ring makes the 1110812 1110802
cross-over style ideal 1102950 1110725 ™
DELTA ARC
FLASH HARNESS
DELTA™ ARC
FLASH HARNESS
for ladder climbing and DELTA™ CROSS-OVER DELTA™ CROSS-OVER Nomex®/Kevlar ® web, no Nomex®/Kevlar ® web,
rescue applications. STYLE HARNESS STYLE HARNESS
metal above the waist, front construction style, back web
Back and front D-rings,
tongue buckles legs.
Back, front and side D-rings,
quick connect buckles.
1110752 and back web loop, quick loop, quick connect buckles,
DELTA™ ARC FLASH HARNESS connect buckle legs, leather pass thru belt/hip pad with
(Universal Size) (Universal Size)
7,000 lb. nylon web, no metal above the insulators. (XLarge) side D-rings. (XLarge)
1102950 (pictured) 1110725 (pictured) waist, front and back web loop, pass thru 1110815 Small 1110803 Small
Tongue Buckles Quick Connect Buckles
buckle legs, leather insulators. (XLarge) 1110810 Medium 1110800 Medium
1110700 1103375
Quick Connect Buckles Tongue Buckles 1110754 SM 1110750 MED 1110751 LG 1110811 Large 1110801 Large
1102010 1103270
Pass Thru Buckles Pass Thru Buckles DELTA™ ARC FLASH HARNESSES DELTA™ ARC FLASH KITS
DELTA™ CROSS-OVER STYLE HARNESSES 1110790 7,000 lb. nylon web, vest-style, PVC coated hardware, back D-ring, pass thru buckles. (Universal Size) 1150054 Includes 1110751 Delta™ arc flash
nylon harness with web loop and 1240861 arc flash
1101812 CONSTRUCTION STYLE CROSS-OVER HARNESS 1110820 Nomex®/Kevlar ® web, vest-style, back web loop, quick connect buckles. (Universal Size) shock absorbing lanyard, 6', with bag. (Large)
Front and back D-rings, pass thru legs, belt and 1110940 Nomex®/Kevlar® web, cross-over style, PVC coated hardware, front, back and side D-rings. (Universal Size) 1150058 Includes 1110752 Delta™ arc flash
hip pad with side D-rings. (XLarge) nylon harness with web loop and 1240861 arc flash
1101809 SM 1101810 MED 1101811 LG 1102005 7,000 lb. nylon with coated hardware, back web loop, two front rescue loops, pass thru buckles. (XLarge) shock absorbing lanyard, 6', with bag. (XLarge)
1102002 SM 1102003 MED 1102004 LG
FULL BODY HARNESSES
DELTA™ 1106107
DELTA™ DERRICK HARNESS
OIL AND DERRICK HARNESSES
DELTA VEST™ These harnesses are designed 18" dorsal D-ring extension, belt
HI-VIS REFLECTIVE AND NON-REFLECTIVE WORKVEST HARNESSES specifically for workers who and hip pad with back D-ring, seat
Sleeveless waist-length vest with harness built-in for high visibility, day or night. operate the monkey and tubing sling, tongue buckle legs, pass-thru
Meets ANSI class II requirements for high visibility vests. boards on oil rigs. They feature connection to 1000570 derrick belt.
comfort and security, with easy 1106112 Small
donning. These models include 1106108 Medium
connections for an optional 1106106 Large
derrick belt, which provides
comfort while positioning
1111584 1111576 for the next drilling pipe.
™
DELTA VEST HI-VIS DELTA VEST™
Harnesses shown
REFLECTIVE HARNESS Cotton blue workvest-style
Yellow workvest-style
with derrick belt. 1000570
harness, non-reflective,
harness, reflective, back DERRICK BELT Work positioning
back D-ring, quick connect
D-ring, quick connect legs. rings, pass thru buckle connection.
legs. (Universal Size)
(Universal Size) 1106354
DELTA™ HI-VIS REFLECTIVE AND NON-REFLECTIVE HARNESSES
DELTA™ DERRICK
HARNESS
1105828
1111580 1107404 Hi visibility orange workvest-style harness, reflective, back D-ring, tongue buckle legs. (Universal Size)
Back and lifting D-rings,
DELTA™ DERRICK HARNESS
Back, side D-rings, tongue buckle
DELTA VEST™ HI-VIS REFLECTIVE HARNESS tongue buckle legs and
1107420 Hi visibility yellow workvest-style harness, reflective, back D-ring, tongue buckle legs. (Universal Size) legs, use with 1000545 derrick belt.
Orange workvest-style harness, reflective, back connection to 1003222
(XLarge)
D-ring, quick connect legs. (Universal Size) derrick belt. (XLarge)
1107416 Blue cotton workvest-style harness, non-reflective, back D-ring, tongue buckle legs. (Universal Size) 1105826 Small
1106357 Small
1105827 Medium
1106350 Medium
™
DELTA RESIST WEBBING HARNESSES 1106353 Large
1105825 Large
RESIST technology (polyurethane coated webbing)
provides protection against grease, oil, dirt and grime.
1000545
1003222 DERRICK BELT Work positioning
DERRICK BELT Work positioning rings, pass thru buckle connection.
rings, tongue buckle belt. (XLarge) (XLarge)
1003220 SM/MED, 1003221 LG 1000542 SM, 1000543 MED,
1110930 1000544 LG
1110990 DELTA RESIST
DELTA RESIST WEBBING HARNESS
WEBBING HARNESS Cross-over style, with
Vest-style, back D-ring, back, front and side
tongue buckle legs. D-rings, tongue buckle
(Universal Size) legs. (Universal Size)
DELTA™ NOMEX ®
/KEVLAR® WELDERS’ HARNESSES
1105475
DELTA™ NOMEX®/KEVLAR® HARNESSES
Vest-style, Nomex®/Kevlar ® web, back D-ring, with
Built-in seat board for DELTA™ OIL AND DERRICK HARNESSES
non-conductive/spark hardware, pass thru buckle leg
straps, loops for belt. (Universal Size) added support.
1106103 18" dorsal D-ring extension, belt and hip pad with back D-ring,
seat sling, tongue buckle legs. (XLarge)
DELTA™ NOMEX®/KEVLAR ® HARNESSES 1106100 SM 1106101 MED 1106102 LG
1104625 Vest-style, back D-ring, pass thru buckle leg straps, loops for belt. 1108128 1104801 Back and lifting D-rings, tongue buckle legs and straps for
connection to 1000555 derrick belt. (XLarge)
(Universal Size) DELTA™ BOSUN CHAIR HARNESS 1104803 SM 1104804 MED 1104800 LG
1109975 Vest-style, back D-ring, quick connect buckles, loops for belt. Front and back D-ring with 18" dorsal D-ring extension,
(Universal Size) tongue buckle belt/pad and side D-rings, seat sling with BOSUN CHAIR HARNESS
rigid seat board. (X Large) 1108103 Front, back and side D-rings with added 18" extension, tongue buckle
1104775 Cross-over style, front, back and side D-rings, pass thru buckle belt/pad and side D-rings, with soft 8" wide seat sling. (XLarge)
1108126 SM 1108127 MED 1108125 LG
leg straps, loops for belt. (Universal Size) 1108101 SM 1108102 MED 1108100 LG
FULL BODY HARNESSES
B O DY B E LT S A N D WO R KS E AT S HAR N E S S ACCE SSO R I E S
LINEMAN’S BELTS WORKSEATS 9504066

SUSPENSION TRAUMA SAFETY STRAPS
11-POCKET CONSTRUCTION POUCH
1000663 They are deployed when needed, hook together in
LINEMAN’S BELT seconds and let a suspended worker stand up in
5 3/4" back pad, side D-rings, tape harness, relieving downward pressure. The continuous
9504072
thong, 2 leather tabs for pouches, loop design allows for one- or two-foot suspension.
4 leather tool accessory snap
15-POCKET CONSTRUCTION POUCH
You can quickly attach them to most harness brands
and ring. D-size = D23 (57.5cm).
right in the field. The compact, lightweight design
D20-D29 available.
stays out of your way.
1000664 = D24 (61cm)
1000665 = D25 (63.5cm) 1001190 9501264
Bosun chair, 12" x 24" x 1" DBI-SALA™ CELL PHONE HOLDER
board, cushion and side snaps.
1000673 1001140 9501403

LINEMAN’S BELT 7-9" back pad 9505494
Bosun chair only, 12" x 24" x 1" board. SUSPENSION TRAUMA
(depending on D) side D-rings, tape PERSONAL RADIO SLEEVE
SAFETY STRAPS
thong, 2 leather tabs for pouches, Carrying holster for personal
4 leather tool loops, accessory snap 1001005 One pair, connects to most harnesses.
radio or Lad-Saf™ sleeve.
and ring. D-size = D23 (57.5cm). Work seat with board, tongue buckle belt and pad, suspension
D20-D29 available. D-rings, adjustable leg/shoulder strap. (XLarge)
1000674 = D24 (61cm) 1001001 XSM 1001002 SM 1001003 MED 1001004 LG 9511597
1000675 = D25 (63.5cm) HARNESS AND LANYARD BAG
1001090 DBI-SALA™ bag 7-1/2" wide x 6-1/2"
deep x 15-1/2" long, holds a harness
Harness accessory, seat sling, 8" wide, belt
attachment loops and D-rings. and lanyard or 50ft. of 5/8" rope.
TONGUE BUCKLE BELTS
1150174
9505504 SM, MED
1000025 1000005 Tongue buckle belt, back D-ring, 3" pad. (XLarge)
HARNESS HYDRATION SYSTEM
50oz. capacity, compatible with all
9505515 LG, XL, XXL
Tongue buckle belt, side D-rings, 1000001 XSM 1000002 SM 1000003 MED 1000004 LG
DBI-SALA™ harnesses. LUMBAR WEAR PADS
3" pad. (XLarge)
Removable lumbar wear pad for
1000021 XSM 1000022 SM 1000023 MED 1000024 LG 1000165 Tongue buckle belt, with floating D-ring, no pad. (XLarge)
1000161 XSM 1000162 SM 1000163 MED 1000164 LG ExoFit NEX™ wind energy
9500468 harness belt.
1000055 1000616 Tongue buckle belt, with back D-ring, no pad. (XLarge) OFF-SHORE LIFEJACKET
Delta tongue buckle belt, no 1000612 XSM 1000613 SM 1000614 MED 1000615 LG 1150911
Off-shore orange life vest, back opening for harness,
D-ring, no pad. (XLarge)
safety whistle, 62 sq. inches of Solas grade reflective tape, TOOL LANYARD
1000051 XSM 1000052 SM 1000717 ExoFit™ tongue buckle belt, no D-ring, no pad. (XLarge)
foam-filled head support collar with two vertical adjustable Tool lanyard extends from 42" to
1000053 MED 1000054 LG 1000708 SM 1000709 MED 1000716 LG
straps, hinged back panel for comfort, universal size. 50" and prevents tools from falling.
Cat. No: 1600 type 1-US Coast Guard Approved. Holds up to 10 lb. (4.5kg) tool. Simply
choke-off to any harness/belt.
CUSTOMIZE YOUR HARNESSES
DBI-SALA™ can put a custom label on your harnesses, or group of harnesses, with an order of 12 or more.
• Same style of harness required, order can

be in multiple sizes.
• One logo per harness.
• Logos on Delta™ harnesses – black on clear
background, sublimation transferred. 1150037 9504374 9502006 1231117 9501207
• Logos on ExoFit™ and ExoFit™ XP – black on DORSAL WEB COVER ATTACHMENT BREAKAWAY FOAM SHOULDER PAD D-RING EXTENSION DELTA™ COMFORT PAD
white background, heat transferred and sewn. Helps protect dorsal webbing LANYARD KEEPER Sold one each, two required D-ring at one end, snap Attaches to most harnesses to
• Logos on ExoFit NEX harnesses – custom logo and
™ on harness while climbing or Plastic ring with velcro per harness. hook at other x 18" (46cm). provide wrap-around comfort.
embroidery, multiple color options to suit any need. descending a ladder such as used to “park” lanyard
in wind turbine towers. when not in use.
SHOCK ABSORBING L ANYARDS
THE GOVERNMENT DBI-SALA™ shock absorbing

lanyards are made of quality
HAS ITS STANDARDS. materials and are built to last.
You wouldn’t trust your life to a lanyard that barely
WE HAVE OURS.
meets standards any more than you would trust
your life to a co-worker who is barely competent.
When you connect to a DBI-SALA™ lanyard, you
TRUST THE BEST. get the best in safety, ease-of-use and durability.
Exceeding the needs of workers is the way
DBI-SALA™ has earned a reputation for
continuous innovation in the design and
manufacture of shock absorbing
lanyards. These DBI-SALA™ lanyards
meet or exceed rigorous industry
safety standards including OSHA
and ANSI Z359.1. Trust the best.
40 41
Workers prefer DBI-SALA™ snap hooks
4
5 One-hand operation makes
CHOOSING A LANYARD DBI-SALA™ snap hooks the

most popular in the industry.
You can even operate them
S H O C K A B S O R B I N G L A N YA R D S
Look for quality in these features when selecting a lanyard. with your gloves on. Open and
close without getting your
fingers in the way!
1 WEBBING
Webbing must be strong enough to endure rough use and exposure to sunlight and All DBI-SALA™ lanyards
1
feature 3,600 lb. (16kN) rated
other elements, without tearing or fraying. Nomex®/Kevlar® webbing should be used for
gates, meeting the rigorous
applications such as welding or arc flash hazards. Webbing may also be coated with ANSI Z359 standard.
polyurethane for protection against grease, oil and grime. Cable lanyards offer extra
durability and are ideal if you’re working in abrasive or high-heat environments. LANYARD HOOK OPTIONS
Standard Hook Aluminum Rebar Hook Flat Steel Rebar Hook Saflok Max™ Steel
3/4" (19mm) gate 2-1/4" (57mm) gate 2-1/2" (62.5mm) gate Rebar Hook
2 IMPACT INDICATORS opening - 3,600 lb. opening - 3,600 lb. opening - 3,600 lb. 3" (76.2mm) gate
4 LENGTH (16kN) gate strength. (16kN) gate strength (16kN) gate strength. opening - 3,600 lb. (16kN)
Impact indicators let you see if a shock absorber has been involved in a fall.
gate strength.
Once an energy absorber has been deployed, the lanyard must be The standard lanyard length is 6 ft. (1.8m), but both shorter and
removed from service immediately and destroyed. longer length lanyards are available. A lanyard should be long
enough to be user-friendly, but kept as short as possible to minimize
3 CONNECTOR/HOOK the free fall distance.
DBI-SALA™ patented snap hooks are popular
because they allow one-handed use and 2 5 SHOCK ABSORBER
won’t pinch your thumbs or fingers. Lanyards used as part of a personal fall arrest system must contain
Lanyards can also be fitted an energy absorbing unit that limits fall arrest forces during a fall
with larger hooks or to less than 1,800 lbs. (8kN). Most designs keep forces below
3 Saflok™ Steel Saflok™ Steel Wrapbax™ Hook Tie-back Carabiner
carabiners, for connection 900 lbs. (4kN) for added safety. Shock absorbers come in pack Carabiner Carabiner 3/4" (19mm) gate 3/4" (19mm) gate
or tubular styles depending on your preference. 1-3/16" (30mm) gate 2-3/16" (55.5mm) gate opening - opening - 5,000 lb.
to larger anchorages. opening - 3,600 lb. (22kN) gate strength.
opening - 3,600 lb. 5,000 lb. (22kN)
(16kN) gate strength. (16kN) gate strength. gate strength.
Equipped with
TYPES OF LANYARDS
SPECIALTY LANYARDS
PACK STYLE TUBULAR STYLE DOUBLE-LEG

SHOCK ABSORBING SHOCK ABSORBING 100% TIE-OFF POSITIONING LANYARDS FOR TYING FALL RESTRICTING
LANYARDS LANYARDS LANYARDS LANYARDS TIE-BACK LANYARDS KEVLAR® LANYARDS OFF AT YOUR FEET DEVICE
These basic lanyards include a These lanyards feature an internal Two lanyards that are connected Lanyards without shock absorbers, When a qualified anchorage connector Special material has an 800ºF char These lanyards can be used at your Unique device cinches around
pack style shock absorber and shock absorber that dissipates at one end. This style of lanyard such as rope or web lanyards and is not available, a tie-back lanyard temperature rating, exceptional feet, allowing a 12 ft. (3.7m) free fall a wood pole during a “cut out”
offer a variety of leg types the energy of a fall. This style is is used to provide 100% tie-off, chain rebar assemblies, are acts as both a connecting means and cut resistance and is ideal for high and maintaining forces below preventing user from falling to
(web, cable, Kevlar®). They available in both a traditional fixed allowing you to stay protected when designed for positioning or an anchorage connector, reducing temperature environments or those 1,800 lbs. (8kN). Also use for 6 ft. the ground and allowing user
dissipate energy, limiting the length design and a “stretch” style moving from one location to another. restraint applications. inventory and cost. requiring arc flash protection. (1.8m) falls for heavier workers up to regain footing.
forces on your body during a fall. that expands and contracts. to 420 lbs. (190kg).
SHOCKWAVE™2 SPECIALTY LANYARDS
RESCUE LANYARDS NOMEX®/KEVLAR® ARC
These lanyards incorporate a built-in D-ring to help facilitate
the rescue of a fallen worker.
FLASH LANYARDS
Constructed from unique materials, these lanyards are ideal for
ShockWave™2 is uniquely designed to expand high heat environments or for electrical work when arc flash is a
and contract (6 ft. to 4-1/2 ft.), in reaction to a

1244456 concern. Meets arc requirements of ASTM F887-05.
SHOCKWAVE™2
worker’s movements. The tubular web stays out RESCUE LANYARD 1244610
Double-leg with snap hook SHOCKWAVE™2
of your way when not in use, avoiding trips and
and flat steel rebar hooks on ARC FLASH LANYARD
snags. A built-in impact indicator provides easy leg ends, D-ring for rescue or Nomex®/Kevlar ® single-leg
self retracting lifeline (SRL) with snap hooks x 6 ft. (1.8m).
visual evidence if the shock has been impact
attachment x 6 ft. (1.8m).
loaded through a fall or improper use. It limits the
average fall arresting forces to 900 lbs. (4kN).
1244750 1244611
SHOCKWAVE™2 SHOCKWAVE™2
RESCUE LANYARD ARC FLASH LANYARD
Double-leg with snap hook Nomex®/Kevlar ® single-leg
and flat steel rebar hooks with snap hook and web
1244306 on leg ends, integrated loop x 6 ft. (1.8m).
rescue D-rings x 6 ft. (1.8m).).
SHOCKWAVE™2 LANYARD
Single-leg with snap hooks
at each end x 6 ft. (1.8m). 1244630
SHOCKWAVE™2 RESCUE LANYARDS SHOCKWAVE™2
ARC FLASH LANYARD
1244455 Double-leg with snap hooks and D-ring for SRL x 6 ft. (1.8m).
Nomex®/Kevlar ® double-leg
1244459 Double-leg with snap hook and Saflok Max™ rebar hooks with snap hooks x 6 ft. (1.8m).
and D-ring for SRL x 6 ft. (1.8m).
1244751 Double-leg with snap hook and aluminum rebar hooks on leg ends,
integrated rescue D-rings x 6 ft. (1.8m).
1244448 1244631
SHOCKWAVE™2
SHOCKWAVE™2 100% ARC FLASH LANYARD
TIE-OFF LANYARD WEB LOOP LANYARDS Nomex®/Kevlar ® double-leg
Double-leg with snap hook Simply choke-off to back D-ring or to dorsal web loop. with snap hooks at leg ends
and Saflok Max™ hooks on Reduces weight and is ideal for electrical applications where and web loop at center x 6 ft. (1.8m).
leg ends x 6 ft. (1.8m). no metal above the waist is preferred.
1244321 1244310 TIE-BACK LANYARDS

SHOCKWAVE™2 LANYARD SHOCKWAVE™2 When a qualified anchorage connector is not available,
Single-leg with snap WEB LOOP LANYARD a tie-back lanyard acts as both a connecting means
hook and steel rebar Single-leg with snap hook at and an anchorage connector.
hook x 6 ft. (1.8m). one end and web loop at the
other x 6 ft. (1.8m). 1244650
1244409
244409 SHOCKWAVE™2
TIE-BACK LANYARD
OCKWAVE™2 100%
SHOCKWAVE
Single-leg with snap hook
E-OFF LANYARD
TIE-OFF
Double-leg
uble-leg with snap hook
1244413 and 5,000 lb. tie-back
andd aluminum rebar hooks
SHOCKWAVE™2 carabiner x 6 ft. (1.8m).
WEB LOOP 100%
on leg ends x 6 ft. (1.8m).
TIE-OFF LANYARD
Double-leg with snap hooks
1244675
SHOCKWAVE™2 LANYARDS SHOCKWAVE™2
at leg ends and web loop
100% TIE-OFF
1244311 Single-leg with snap hook and aluminum rebar hook x 6 ft. (1.8m). at center x 6 ft. (1.8m). TIE-BACK LANYARD
1244360 Single-leg with snap hook and Saflok Max™ hook x 6 ft. (1.8m). Double-leg with snap hook ok
1244406 Double-leg with snap hooks at each end x 6 ft. (1.8m). and 5,000 lb. tie-back carabiners
arabiners
1244412 Double-leg with snap hook and flat steel rebar hooks x 6 ft. (1.8m). at leg ends x 6 ft. (1.8m)..
EZ-STOP™II SPECIALTY LANYARDS
TIE-BACK LANYARDS RESIST LANYARDS
When a qualified anchorage connector is not available, a Polyurethane coated webbing
tie-back lanyard acts as both a connecting means provides ultimate protection
and an anchorage connector. against grease, oil and grime.
1240850
1240006 EZ-STOP™II
EZ-STOP ™II LANYARD RESIST LANYARD
Single-leg polyurethane coated web,
Single-leg with snap hooks at each
snap hooks x 6 ft. (1.8m).
end x 6 ft. (1.8m). 1241106
™
EZ-STOP II TIE-BACK LANYARD
Single-leg with floating D-ring for tie-back, snap hooks at ends x 6 ft. (1.8m).
1240880
EZ-STOP™II TIE-BACK
RESIST LANYARD
1240256 1241206 Double-leg with floating D-rings for tie-back, snap hooks at
Double-leg polyurethane coated web,
ends x 6 ft. (1.8m).
EZ-STOP™II floating D-rings for tie-back, snap hooks x 6 ft. (1.8m).
ADJUSTABLE LANYARD 1240526 Double-leg polyurethane coated web, snap hooks x 6 ft. (1.8m).
Single-leg, adjustable
SHOCK ABSORBING LANYARDS length with snap 1241124
hooks x 6 ft. (1.8m). EZ-STOP™II KEVLAR® LANYARDS
TIE-BACK LANYARD When you need protection
Single-leg with floating D-ring from high heat, such as
EZ-Stop™ II lanyards use a controlled tearing when welding or
for tie-back, snap hook and
action when subjected to fall arrest forces. They working in high
aluminum rebar hook x 6 ft. (1.8m).
1240706
706 temperature
1240601
limit the average arresting forces to 900 lbs. EZ-STOP ™II LANYARD 1241219 Double-leg with floating D-rings for tie-off, snap hook and environments.
®
aluminum rebar hooks at leg ends x 6 ft. (1.8m). KEVLAR TIE-BACK LANYARD
(4kN) or less. These lanyards feature 1" polyester Single-leg with 7/32" vinyl
Single-leg Kevlar ® web with floating D-ring
covered cable
ble and snap
web construction (unless specified differently), for tie-back, snap hooks x 6 ft. (1.8m).
hooks x 6 ft.t. (1.8m).
double locking snap hooks, a durable nylon shock 1241220 EZ-STOP™II KEVLAR® LANYARDS
EZ-STOP™II 100% TIE-OFF
absorber cover and various lengths and hook TIE-BACK LANAYRD
1240559 Single-leg Kevlar ® web with snap hook and aluminum rebar
hook x 6 ft. (1.8m).
options to fit your job. Double-leg with floating
D-rings for tie-back, snap hook
1240680 Double-leg Kevlar® web with snap hooks at each end x 6 ft. (1.8m).
and flat steel rebar hook at
1240906
9006 leg ends x 6 ft. (1.8m).
1240406 EZ-STOP ™II LANYARD 1241125 Single-leg with floating D-ring for tie-back, snap hook and flat
steel rebar hook x 6 ft. (1.8m).
EZ-STOP™II Elastic leg, 1" web, snap
100% TIE-OFF LANYARD hooks at ends, x 6 ft. (1.8m).
Double-leg with snap hooks at
each end x 6 ft. (1.8m).
EZ-STOP™II SINGLE-LEG LANYARDS

1240077 Single-leg with snap hook and aluminum rebar hook x 6 ft. (1.8m).
EZ-STOP™II DOUBLE-LEG LANYARDS 1240211
1240086
Single-leg with snap hook and Saflok Max™ hook x 6 ft. (1.8m).
Single-leg with snap hook and Saflok™ steel carabiner x 6 ft. (1.8m).
1240558
1241006 Double-leg with elastic leg and snap hooks at each end x 6 ft. (1.8m). KEVLAR® LANYARD
1241008 Double-leg with elastic legs, snap hook and aluminum rebar Single-leg Kevlar ® 1-3/4" web
1240416
hooks at leg ends x 6 ft. (1.8m).
Double-leg with snap hook and aluminum rebar hooks at leg
1240362 with snap hooks x 6 ft. (1.8m).
ends x 6 ft. (1.8m). EZ-STOP™II SHOCK ABSORBER

Add in-line to a non-shock absorbing lanyard
1240427 Double-leg with snap hook and flat steel rebar hooks at leg
for fall arrest applications. Snap hook at
one end, D-ring at other x 19.5" (50cm).
1240804 Double-leg with 7/32" vinyl covered cable and snap hooks x 6 ft. (1.8m).
46 D B I - S A L A™ W W W. C A P I TA L S A F E T Y. C O M 800.328.6146 47
WrapBax™2 eliminates the need for a separate anchorage connector, reducing inventory
and cost, simplifying inspections, training and improving compliance. It offers a unique
5,000 lb. (22kN) hook and heavy duty webbing, providing abrasion resistance.
ARC FLASH LANYARDS TIE-BACK LANYARDS Limits the average arresting force to 900 lbs. (4kN) or less.
Constructed from unique materials, these lanyards are ideal
for high heat environments or for electrical work when arc
SH O CK ABS O RBI NG LANYARDS

flash is a concern. Meets
arc requirements
of ASTM F887-05.
1242003
WRAPBAX ™2 TIE-BACK LANYARD
1241906 Double-leg with snap hook and 5,000 lb. (22kN)
1240860 WRAPBAX ™2 TIE-BACK LANYARD
Single-leg with snap hook and 5,000 lb. (22kN) WrapBax™ hook x 6 ft. (1.8m).
WrapBax™ hooks at leg ends x 6 ft. (1.8m).
EZ-STOP™II ARC FLASH LANYARD
Single-leg with Kevlar® pack, coated 1242128 Double-leg Force2™ with snap hook and 5,000 lb. (22kN) WrapBax™
web and snap hooks x 6 ft. (1.8m).
1242102 Single-leg Force2™ with snap hook and 5,000 lb. (22kN) WrapBax™ hooks at leg ends x 6 ft. (1.8m).
hook x 6 ft. (1.8m).
EZ-STOP™II ARC FLASH LANYARDS

1240861 Single-leg with Kevlar® pack, coated web, snap hook at leg end, RETRAX™ LANYARDS
web loop at other x 6 ft. (1.8m). Ideal when there is no overhead anchorage and your only option is to tie-off at your
Unique spring technology retracts and expands from
feet. It can be used for up to a 12 ft. (3.7m) free fall and limits the average forces
1240536 ®
Double-leg with Kevlar pack, coated web, snap hooks at leg ends, 2-1/2 ft. to 6 ft. in reaction to users movements.
web loop at center x 6 ft. (1.8m). below 1,800 lbs. (8kN). It can also be used as a standard lanyard for workers that
require a capacity of 311 lbs. to 420 lbs. (141kg to 190kg).
190kg
1240871 Double-leg with Kevlar ® pack, coated web, snap hooks at leg ends,
SHOCKK ABSORBING LANYARDS
web loop at center x 6 ft. (1.8m). 1241480
EZ-STOP™II RETRAX ™
1240870 100% TIE-OFF LANYARD 1245006
5006
Double-leg with snap hooks at FORCE22™ LANYARD
EZ-STOP™II
each end x 6 ft. (1.8m). Single-leg
eg with
ARC FLASH LANYARD
® snap hooks
oks at
Single-leg with Kevlar
each endd x
pack and web, snap
6 ft. (1.8m).
m).
hooks x 6 ft. (1.8m).
1241460
EZ-STOP™ II RETRAX ™ LANYARD
Single-leg with snap hooks at each end x 6 ft. (1.8m).
WEB LOOP LANYARDS 1245176
76 Double-leg with snap hooks at each end x 6 ft. (1.8m).
Simply choke-off to back D-ring or to dorsal web loop. EZ-STOP™II RETRAX™ LANYARDS 1245177
77 Double-leg with snap hook and flflat
at steel rebar hooks at leg
Reduces weight and is ideal for electrical applications ends x 6 ft. (1.8m).
where no metal above the waist is preferred. 1241461 Single-leg with snap hook and flat steel rebar hook x 6 ft. (1.8m).
1241462 Single-leg with snap hook and aluminum rebar hook x 6 ft. (1.8m).
1240068 1241463 Single-leg with snap hook and web loop x 6 ft. (1.8m).
1241081
FORCE2™ ARC FLASH LANYARD
EZ-STOP™II 1241481 Double-leg with snap hook and flat steel rebar hooks at leg
Double-leg with Kevlar ®/Nomex®
WEB LOOP LANYARD ends x 6 ft. (1.8m).
Single-leg with snap hook at one end and 1241482 Double-leg with snap hook and aluminum rebar hooks at leg
WIND ENERGY LANYARDS adjustable web, snap hooks at
web loopp at other x 6 ft. (1.8m).
( ) ends x 6 ft. (1.8m).
1241071 Single-leg with Kevlar ®/Nomex® adjustable web, snap
hooks at ends x 6 ft. (1.8m).
1242551
FORCE2™ WIND ENERGY LANYARD
Double-leg with elastic web, snap hook
SHOCK ABSORBING LANYARDS and Saflok Max™ hooks on leg ends,
These lanyards are lightweight and 1244760 integrated rescue D-rings x 6 ft. (1.8m).
simple. Their basic 1-3/8" tubular web
design has proven to not only
1244006 FORCE2™ WIND
ENERGY LANYARD
1242550 Double-leg with elastic web, snap hook and aluminum rebar hooks
at leg ends, integrated rescue D-rings x 6 ft. (1.8m).
™
be safe and effective, but EZ-STOP III SHOCK
Double-leg with elastic webbing,
very popular. EZ-Stop™ III ABSORBING LANYARD FORCE2™ WIND ENERGY LANYARDS
snap hook and flat steel rebar hooks
lanyards limit average Single-leg with snap hooks at each 1245207 Double-leg with elastic web, snap hook and aluminum rebar
at leg ends, Tech-Lite™ rescue
arresting forces to end x 6 ft. (1.8m). hooks at leg ends x 6 ft. (1.8m).
D-rings, nylon shock pack with PVC
900 lbs. or under.
cover x 6 ft. (1.8m). Global 1245208 Double-leg with elastic web, snap hook and Saflok Max™ hooks at
1244024 Single-leg with snap hook and aluminum rebar hook x 6 ft. (1.8m). compliance OSHA, ANSI and CE. leg ends x 6 ft. (1.8m).
POSITIONING L ANYARDS Cynch-Lok™ was developed with help from real pole
WHERE BUCKET TRUCKS DARE NOT GO.
climbers and features effortless adjustment and “cynches”
™ around the pole during a “cut-out.” Cynch-Lok™ meets CSA
POSITIONING Lanyards without shock absorbers, such as rope or web lanyards
and chain rebar assemblies, are designed for positioning or
restraint applications.
CYNCH-LOK GETS Z59.14 standards for Type AB (dry, wet and icy poles) and
allows you to easily hitch-hike poles (move or jump the
LANYARDS YOU THERE FASTER strap upwards) with a hand position that’s comfortable.
P O S I T I O N I N G L A N YA R D S
It also moves past obstacles without difficulty. Exterior
WEB POSITIONING LANYARDS

AND SAFER. straps can easily be swapped out in the field depending
on pole size, eliminating the need for multiple systems.
1" polyester web construction for

durability that will last. Available
in various lengths.
1231016
WEB LANYARD CHAIN & WEB REBAR
Single-leg with 1" polyester web, adjustable length POSITIONING LANYARDS
and snap hooks at each end x 6 ft. (1.8m). Made of twist link chain or polyester web for strength and FALL RESTRICTING DEVICES
durability. A variety of hook options provide a safe and
compatible connection to many types of structures. 1204057
1231106 CYNCH-LOK ™ FOR
WEB LANYARD DISTRIBUTION POLES
Single-leg with 1" polyester
• Pole Size (Dia/Circ): Min 5.5"/17.5"- Max 16"/50"
web and snap hooks at
each end x 6 ft. (1.8m).
5920059 • Weight: 4.5 lbs. (2.0 kg)
CHAIN REBAR ASSEMBLY
1200110 Cynch-Lok™ Replacement Strap for
Chain rebar assembly with snap hooks and swiveling
POSITIONING WEB LANYARDS Distribution Poles 1204057, Weight: 1.6 lbs. (0.7kg).
Saflok Max™ hook at center x 24" (60cm).
1231102 Single-leg with 1" polyester web and snap hooks x 2 ft. (0.6m).
CHAIN REBAR LANYARDS
1231103 Single-leg with 1" polyester web and snap hooks x 3 ft. (0.9m).
1231104 Single-leg with 1" polyester web and snap hooks x 4 ft. (1.2m). 5920050 Chain rebar assembly with snap hooks and swiveling flat steel rebar
hook at center x 20.5" (52cm).
5920051 Chain rebar assembly with snap hooks and swiveling aluminum rebar
ROPE POSITIONING LANYARDS 5920080
hook at center x 22" (56cm).
Chain rebar assembly with snap hooks and aluminum rebar hook
Nylon or polyester rope available in various lengths with
at center x 20.5" (52cm).
exclusive five-tuck splice and seizing method to hold the
connection and prevent
event unweaving. 5920101 Chain rebar assembly with snap hooks and swiveling 2000114
carabiner at center x 22" (56cm).
1232354 1204058
NYLON ROPE LANYARD
RD CYNCH-LOK ™ FOR
TRANSMISSION POLES
Single-leg 1/2" nylon rope
ope
with snap hooks at eachh
1231380 • Pole Size (Dia/Circ): Min 5.5"/17.5"- Max 37"/116"
WEB REBAR ASSEMBLY
end x 6 ft. (1.8m). • Weight: 5.0 lbs. (2.3 kg)
Web rebar assembly with snap hooks and
aluminum rebar hook at center x 18" (45cm). 1200111 Cynch-Lok™ Replacement Strap for
Transmission Poles 1204058, Weight: 2.1 lbs. (1.0kg)
WEB REBAR LANYARDS
1232210
POLYESTER ROPE LANYARD 1231389 Web rebar assembly with snap hooks and Saflok Max™ hook at
Single-leg 1/2" polyester center x 18" (45cm). ADDITIONAL POSITIONING LANYARDS
rope with adjustable 1231520 Web rebar assembly with snap hooks and swiveling aluminum
length and snap hooks hook at center x 22" (56cm). 1234030 1234070
at each end x 6 ft. (1.8m). ADJUSTABLE WEB ADJUSTABLE WEB
POSITIONING STRAP POSITIONING STRAP
Nylon web with friction with Rope Adjuster.
POSITIONING ROPE LANYARDS 2108403 buckle and snap
1232209 Single-leg 1/2" nylon rope with adjustable length and snap hooks SPREADER HOOK hooks x 6 ft. (1.8m).
at each end x 6 ft. (1.8m). Use with large carabiner to form a positioning assembly that is short and
1232306 Single-leg 1/2" polyester rope with snap hooks at each end x 6 ft. (1.8m). compact. Steel hooks with self locking/closing 3,600 lb. (16kN) gates.
SELF RETRACTING LIFELINES
DBI-SALA™ is #1 in the development
of reliable, versatile self retracting
UP HERE, PUT YOUR lifelines (SRLs).
Our innovations include the first retractable
TRUST IN GEAR lifeline, sealed SRL, RSQ dual-mode SRL,

3-way SRL with built-in retrieval and the
impact indicator — important safety
THAT WORKS AS innovations which have now been widely

adopted across the industry. When there
is nothing between you and the ground
HARD AS YOU DO.

but clouds, it doesn't make sense to
choose another brand. Our SRLs meet
OSHA and ANSI standards.
HOW TO CHOOSE THE RIGHT SRL?
• HOUSING CONSTRUCTION
Thermoplastic - When weight is key
Aluminum - When ultimate durability is required
• LIFELINE MATERIAL
Wire rope or synthetic options for varying environments
• SEALED DESIGN For harsh/corrosive environments
• RETRIEVAL Ideal for confined space rescue/retrieval applications
• RSQ Built-in rescue allows user to be lowered after a fall either automatically or manually
• FAST-LINE™ Allows user to replace lifeline assembly in the field
• TIE-BACK Eliminates the need for a separate anchorage connector
• HARNESS MOUNT Direct connection takes the hassle out of fall protection
• ARC FLASH RATED Built to withstand the demands of electrical work
• LEADING EDGE Specialized lifeline and external shock for leading edge applications
MATRIX SEALED-BLOK™ ULTRA-LOK™ TALON™

Lifeline Lengths 15' - 175' 10' - 85' 6' - 16'
Housing Construction Aluminum Thermoplastic Thermoplastic
Lifeline Material Cable/Synthetic Cable/Synthetic/Web Web
Sealed Design for
Corrosive Environment •
Retrieval Option •
RSQ™ • •
FAST-Line™ •
Tie-Back Option •
Direct Harness Mount •
Arc Flash Rated •
Leading Edge •
Equipped with
52 53
SELF RETRACTING LIFELINES The Sealed-Blok™ lifeline extends and retracts enabling the user to
™
SEALED-BLOK
move about within a recommended working area at normal speeds.
Should a fall occur, a speed-sensing brake system (4.5 ft./sec.) will
SEALED-BLOK™
• PIVOTING ANCHORAGE LOOP
Centers the load.
activate, stopping the fall and reducing the forces imposed on the
user to 900 lbs. (4kN) or less.
• ALUMINUM HOUSING
310 LB. (141KG) WEIGHT CAPACITY

420 LB. (189KG) WEIGHT CAPACITY
INCLUDES MOUNTING BRACKET
These sealed SRLs incorporate a patented Provides exceptional strength,
durability and corrosion resistance.
concept that separates all dynamic components,
RETRIEVAL CAPABILITY
including the motor spring and brake, from
LIFELINE MATERIAL
RSQ CAPABILITY
HOOK MATERIAL
S E L F R E T R AC T I N G L I F E L I N E S
foreign elements such as grease, moisture • STAINLESS STEEL
and dirt. You can always trust your SRL
END-PLATE
15 ft. 30 ft. 50 ft. 85 ft. 130 ft. 175 ft.
to work at peak efficiency without (4.5m) (9m) (15m) (25.5m) (39m) (52.5m)
worrying about the environment SEALED DESIGN • 3400825 3400800 3403500 3403600 3400610
Ensures efficient,
you're working in. safe operation under • 3400900
all working conditions –
GALVANIZED CABLE
only SRL to meet IP68 3-way models with built-in emergency • • 3400850 3403502 3403602 3400620
TRUSTED - Our sealed SRLs are retrieval and mounting brackets
sealed rating.
• • 3400920
STEEL
backed by decades of proven field are ideal for confined space rescue.
Available with and without mounting
service for absolute confidence. brackets. See confined space section • • • 3400940
ANTI-RATCHETING for additional options.
DURABLE - Heavy-duty, corrosion DESIGN • • 3400930
Stays locked on rigid
resistant materials stand-up
and non-rigid (horizontal
• • • 3400853 3400311 3400509
to even the harshest of environments.
lifeline) anchors. • • • 3400923
RELIABLE - Sealed design protects device • 3400827 3400802 3400205 3400407 3400612
from foreign elements, extending
• 3400902
STAINLESS STEEL
maintenance intervals and longevity.
420 LB. WEIGHT
CAPACITY • • 3400932
Higher capacity for
Model Shown
3400900 operator and tools • • 3400852 3400308 3400507
• CARRYING HANDLE (option).
Built-in design for easy transport – • • 3400922
STAINLESS STEEL CABLE

certified as secondary fall arrest
rated anchorage point.
• • • 3400942
• ERGONOMIC CABLE HANDLE
Provides added comfort and ease-of-use • 3400826 3400801 3403501 3403601 3400611
when making connections. • 3400901
• • 3400931
™
FAST-Line allows the lifeline assembly
• • 3400851 3403503 3403603 3400621
STEEL
• GALVANIZED & STAINLESS to be replaced out in the field.
STEEL CABLE • • 3400921
SELF LOCKING SWIVEL HOOK • Abrasion resistant and corrosion
Limits lifeline twisting.
resistant lifeline options. 3900105 • • • 3400941
FAST-LINE™ • 50 ft. (15m) FAST-Line™ • • • 3400857 3400309 3400508

Provides the user with ability to galvanized replacement
replace the lifeline in the field. • IMPACT INDICATOR • • • 3400924
Provides visual cable assembly.
indication of fall arrest . 12 lbs. 18 lbs. 29 lbs. 44 lbs. 60 lbs. 100 lbs.
WEIGHT
3900106 (5.5kg) (8kg) (13kg) (20kg) (27kg) (45kg)
50 ft. (15m) FAST-Line™ Non-
SEALED DESIGN Sealed Sealed Sealed Sealed Sealed
stainless steel replacement Sealed
• RSQ DUAL-MODE DESIGN
™
cable assembly.
(see pages 58-59 for details) • 3,600 LB. GATE FAST-LINE™ Standard
Allows user to select either Reduces chances of accidental 10.2" 11.5" 13.3" 16" 18.7" 18.7"
fall arrest mode or descent mode. disengagement (“roll-out”). 3900107 APPROXIMATE LENGTH
50 ft. (15m) FAST-Line™ (25cm) (29cm) (34cm) (41cm) (48cm) (48cm)
stainless steel replacement 7.6" 9.4" 10.4" 9.9" 11.7" 11.7"
Equipped with APPROXIMATE WIDTH
cable assembly and hook. (19cm) (24cm) (27cm) (25cm) (30cm) (30cm)
Model Shown
3400930 4.3" 5.4" 6.9" 6.7" 7.2" 10.9"
APPROXIMATE HEIGHT
(11cm) (14cm) (18cm) (17cm) (18cm) (28cm)
Other models available; please contact DBI-SALA™.
ULTRA-LOK™
SELF RETRACTING LIFELINES 3103108 3103175 3504500
WEB SRL ARC FLASH SRL LEADING EDGE SRL
ULTRA-LOK
™
• TOP SWIVEL
Limits lifeline twisting for smoother operation.
The Ultra-Lok™ lifeline extends
and retracts, enabling the user to move
Nylon web lifeline
models are lighter
Kevlar ®/Nomex® lifeline
offers the ultimate in
Unique design
incorporates larger
about within a recommended working weight for added spark, fire resistance diameter 7/32"
CONSTANT MOVING PAWLS area at normal speeds. Should a fall comfort and are less and electrical cable and an in-line
These SRLs are rugged, yet extremely Helps prevent corrosion or freeze-up and provides occur, a speed-sensing brake system abrasive to objects conductivity for utility, shock absorber for the
audio indicator of functioning brake system. (4.5 ft./sec.) will activate, stopping the
lightweight and superbly engineered around system. welding, cutting and demands of leading
fall and reducing the forces imposed torching applications. edge applications.
devices you can count on for on the user to 900 lbs. (4kN) or less.
safety, efficiency and comfort. ANTI-RATCHETING DESIGN
Stays locked on rigid and non-rigid
Stainless steel components, an (horizontal lifeline) anchors.
RATED GATE CAPACITY (LBS.)
SRL WEIGHT CAPACITY (LBS.)

ORDER PICKER MOUNTING
anti-ratcheting brake system
HOOK THROAT SIZE (IN)

RESERVE LIFELINE
LIFELINE MATERIAL
and a semi-sealed design Allows brake to function properly
LEADING EDGE
SWIVEL HOOK
when entire lifeline is extended.
HOOK STYLE
provide the user with a 11 ft. 20 ft. 30 ft. 50 ft. 55 ft. 85 ft.
RSQ
system built to last. (3.4m) (6.1m) (9.1m) (15.2m) (16.7m) (26m)
STAINLESS STEEL COMPONENTS
Motor spring, fasteners, locking
STEEL CARABINER 5/8 3,600 • 310 3504445 3504446 3504463
pawls, shaft, springs and ratchet 5/8 3,600 • • 310 3504500 3504600
GALVANIZED
plate are stainless steel to extend
CABLE
SEMI-SEALED DESIGN
life of device. STEEL HOOK • • 310 3504550
3/4 3,600
Gasket between housing halves • 310 3504433 3504430 3504450 3504485
helps prevent contaminants from
entering, extending life of device. • THERMOPLASTIC HOUSING • • 310 3504551
Lightweight, compact STEEL HOOK 3/4 3,600
and durable. STAINLESS • 310 3504434 3504431 3504451 3504486
STEEL CABLE
STAINLESS STEEL • • 310 3504552
3/4 3,600
HOOK
• 310 3504437 3504432 3504452 3504487
VECTRAN ROPE STEEL HOOK 3/4 3,600 • 310 3504438 3504480
3,600 310 3103209

STEEL CARABINER 11/16
3,600 • 420 3103119
• ERGONOMIC CABLE HANDLE
Provides added comfort and ease-of-use STAINLESS STEEL
11/16 3,600 310 3103214
when making connections. CARABINER
ALUMINUM
REBAR HOOK
2 1/4 3,600 • 420 3103110
NYLON WEB • • 420 3103108
• MULTIPLE LIFELINE OPTIONS • 310 3103208

™ ™ STEEL HOOK 5/8 3,600
Cable, web, Vectran and Spectra rope lifeline
options for ultimate jobsite flexibility. • 420 3103107
310 3103207
• SELF LOCKING SWIVEL HOOK
Limits lifeline twisting. • • 420 3103136
Model Shown STAINLESS STEEL
3/4 3,600
HOOK
3504550 • IMPACT INDICATOR • 310 3103212
Provides visual indication of fall arrest.
• • 420 3103175
• KEVLAR®/ STEEL HOOK 5/8 3,600
RSQ™ DUAL-MODE DESIGN NOMEX® WEB • 310 3103275
(see pages 58-59 for details)
Allows user to select
WEB LOOP (CHOKER) N/A N/A • 420 3103176
either fall arrest mode • 3600 LB. GATE APPROXIMATE WEB SRL WEIGHT 3.9 lbs. (1.8kg) 5.5 lbs. (2.5kg) – – – –
or descent mode. Reduces chances of accidental
disengagement (“roll-out”). APPROXIMATE CABLE (GALV) SRL WEIGHT 8 lbs. (3.6kg) 9 lbs. (4.1kg) 11 lbs. (5kg) 15 lbs. (6.8kg) 30 lbs. (13.6kg) 33 lbs. (15kg)
Equipped with APPROXIMATE DEPTH 2" (5.1cm) 2" (5.1cm) 3.3" (8.4cm) 3.3" (8.4cm) 3.3" (8.4cm) 3.3" (8.4cm)
420 LB. WEIGHT CAPACITY APPROXIMATE WIDTH 5.2" (13.3cm) 6.4" (16.2cm) 6" (15.2cm) 6" (15.2cm) 6" (15.2cm) 6" (15.2cm)
Higher capacity for operator APPROXIMATE HEIGHT 7.6" (19.3cm) 8.9" (22.6cm) 11.5" (29.2cm) 11.5" (29.2cm) 11.5" (29.2cm) 11.5" (29.2cm)
Model Shown 3504450
and tools (option).
* Other models available; please contact DBI-SALA™.
FALL ARREST MODE FALL ARREST MODE AUTOMATIC
Assisted Rescue by Pole Assisted Rescue by Hand DESCENT MODE
Self Rescue/Descent
Model Shown
3400930
RSQ™ DUAL-MODE
BUILT-IN RESCUE OPERATION
No other brand has the exclusive DBI-SALA™ dual–mode descent operation!
Our RSQ™ feature allows the user, prior to connection, to choose their
mode of operation. This two-in-one operation lowers the cost of ownership
by reducing the need for separate rescue equipment.
• Standard fall arrest mode
• Automatic descent mode
• Remote/Assisted descent activation options
CHOOSE YOUR MODE
These Assisted Rescue Options “Engage” the Descent Mode.

Traditional assisted rescue operations may also be conducted.
Model Shown
3504550 FALL AUTOMATIC SEALED-BLOK™ RSQ ASSISTED RESCUE ACCESSORIES
ARREST DESCENT 3500201 First-Man-Up™ Pole 6-12 ft. (1.8-3.6m) with Assisted Rescue Tool
MODE MODE 3500202 First-Man-Up™ Pole 8-16 ft. (2.4-4.8m) with Assisted Rescue Tool
(Assisted Rescue): (Self Rescue/Descent):
3500200 Assisted Rescue Tool Only (If you already have a First-Man-Up™ Pole)
A speed-sensing brake stops A speed-sensing brake stops the fall
the fall, reduces forces imposed just like in fall arrest mode, then ULTRA-LOK™ RSQ ASSISTED RESCUE ACCESSORIES
on the user to safe levels of instantly a centrifugal brake activates, 3500101 First-Man-Up™ Pole 6-12 ft. (1.8-3.6m) with Assisted Rescue Tool
900 lbs. or less and allows for lowering the user at a controlled speed 3500102 First-Man-Up™ Pole 8-16 ft. (2.4-4.8m) with Assisted Rescue Tool
assisted rescue to take place. to the next level or the ground. 3500100 Assisted Rescue Tool Only (If you already have a First-Man-Up™ Pole)

TWIN-LEG SELF RETRACTING LIFELINE
SWIVEL HOOK
HOOK STYLE
6 ft. 7.5 ft.
TIE BACK
Provides a significant increase in mobility
(1.8m) (2.3m)
SELF RETRACTING LIFELINE and safety, allowing user to “leap-frog”
while moving from one location to
• 310 3102005
Talon is an extremely compact SRL with an all metal
™ • Extremely lightweight design – under 3 lbs. (1.4kg)
another. Each lifeline ALUMINUM • 350 3102102
anti-ratcheting braking system that limits arresting forces to • Built-in connector for direct attachment to harness 2 1/4 3,600
works independently, REBAR HOOK 310 3102000
900 lbs. (4kN). Because of our unique brake system, your workers • Greater freedom of movement without compromising safety extending up to 6
can maintain a normal work pace and not be interrupted with 420 3102016
• Maintains compact size and weight for comfort feet and automatically
constant lock ups. An SRL that is lighter, stronger and safer! and convenience retracting, providing fall • 350 3102101
protection and mobility STEEL 2 1/4 3,600 310 3102003

REBAR HOOK

100% of the time. 420 3102017
ORDER PICKER MOUNTING

3 3,600 310 3102008
• Twin-leg 100%
HOUSING SWIVEL
• 310 3102100
SWIVEL HOOK
tie-off SRL provides
HOOK STYLE
5/8 5,000
•
TIE BACK
continuous protection 420 3102115
7 ft. 8 ft. 9.5 ft. 16 ft.
(2.1m) (2.4m) (2.9m) (4.9m) • Built-in anchorage connector • 310 3102002
STEEL
for direct attachment to SNAP HOOK
ALUMINUM REBAR HOOK 2 1/4 3,600 310 3101007
harness or anchorage • 420 3102014
3/4 3,600
STEEL REBAR HOOK 2 1/2 3,600 310 3101006 310 3102001
• Compact, lightweight
• • 310 3101051 design does not 420 3102015
hinder movement
• • 310 3101009 APPROXIMATE WEB SRL WEIGHT 5 lbs. (2.2kg) 5.5 lbs. (2.2kg)
• Replaces a simple APPROXIMATE TIE-BACK WEB SRL WEIGHT – 6.5 lbs. (3kg)
• • 310 3101016
lanyard with the
APPROXIMATE DEPTH 2.6" (6.6cm) 2.6" (6.6cm)
3,600 • 310 3101001 convenience of a
APPROXIMATE WIDTH 7.2" (18.2cm) 7.2" (18.2cm)
retractable lifeline
STEEL SNAP HOOK 5/8 • 310 3101050 APPROXIMATE HEIGHT 3.8" (9.7cm) 3.8" (9.7cm)
• 310 3101008 * Other models available; please contact DBI-SALA™.
310 3101000
3102100
• 310 3101300 TALON™ TIE-BACK
5,000 MODEL SHOWN
• 420 3101315
All twin-leg Talon™ SRLs
Model Shown
WEB LOOP (CHOKER) N/A N/A • 310 3101304 3102000 Attached to include: Delta Comfort Pad
1102000 Harness and 2 ea. Lanyard Keepers
APPROXIMATE WEB SRL WEIGHT 2.7 lbs. (1.2kg) 2.7 lbs. (1.2kg) 3.4 lbs. (1.5kg) 4.7 lbs. (2.1kg)
APPROXIMATE DEPTH 2.2" (5.6cm) 2.2" (5.6cm) 2.2" (5.6cm) 2.4" (6.1cm)
APPROXIMATE WIDTH 3.9" (9.9cm) 3.9" (9.9cm) 3.9" (9.9cm) 5.9" (15cm)
APPROXIMATE HEIGHT 8.9" (22.6cm) 6.7" (17cm) 6.7" (17cm) 7.9" (20cm)
SINGLE AND TWIN-LEG TALON™ HOOK OPTIONS
* Other models available; please contact DBI-SALA™.
3101009
TALON™
3101001 ORDER PICKER
SELF RETRACTING Standard Hook Swiveling Hook WrapBax™ Hook Saflok™ Steel Saflok™ Steel Aluminum Rebar Flat Steel Rebar Saflok Max™ Steel
TALON™ 3/4" (19mm) 3/4" (19mm) Carabiner 11/16" Carabiner 2-3/16" Hook 2-1/4" Hook 2-1/2" Rebar Hook 3"
LIFELINE 3/4" (19mm)
QUICK CONNECT SELF Gate Opening - Gate Opening - Gate Opening - (17.5mm) Gate (55.5mm) Gate (57mm) Gate (62.5mm) Gate (76.2mm) Gate
Web SRL with order
RETRACTING LIFELINE 3,600 lb. (16Kn) 3,600 lb. (16Kn) 5,000 lb. Gate Opening - 3,600 Opening - Opening - 3,600 Opening - 3,600 Opening - 3,600
picker connector and
Web SRL with quick connector Gate Strength Gate Strength Strength lb. (16Kn) Gate 3,600 lb. (16Kn) lb. (16Kn) Gate lb. (16Kn) Gate lb. (16Kn) Gate
swiveling hook x 8 ft. Strength Gate Strength Strength Strength Strength
and swiveling hook x 8 ft. (2.4m).
(2.4m).
ACCESSORIES
See pages 90-101 for other anchorage devices.
8102101
REMOTE POWER TAGLINE SYSTEM
Ideal for use in applications where bridge cranes or other
temporary overhead obstructions exist and fall protection is needed.
The system provides easy, remote access to an overhead self retracting lifeline.
• 75 ft. per minute travel speed for rapid access
• 100 ft. length – long enough to handle the tallest ceiling-to-floor application
• Accommodates up to three SRLs for added jobsite versatility
• Includes both wireless remote and corded controls for added flexibility
• Operates on standard 110 volt power for ease of installation
8102102 REMOTE POWER TAGLINE SYSTEM 220 volt power
7211856
TAGLINE FOR SRL
3/16" polypropylene rope with O-ring at one end x 50 ft. (15m)
7211857 Tagline x 25 ft. (7.6m)
7211858 Tagline x 35 ft. (10.6m)
1003006 CARABINERS
TIE-OFF ADAPTOR
Pass thru style polyester
web x 6 ft. (1.8m)
5900551
Cable pass-thru tie-off 2000112 2000113 2000114
adaptor x 6 ft. (1.8m) SAFLOK ™ CARABINER SAFLOK ™ CARABINER SAFLOK ™ CARABINER
Steel carabiner, self locking/ Steel carabiner, self locking/ Steel carabiner, self locking/
closing 3,600 lb. (16kN) gate, closing 3,600 lb. (16kN) gate, closing 3,600 lb. (16kN) gate,
3/4" (19mm) opening. 1-3/16" (30mm) gate opening. 2-3/16" (55.5mm) gate opening.
LOAD ARRESTOR
Protect valuable equipment and materials with sturdy, self-contained
backup load arrestors. They are designed and engineered to completely
stop a dropping load if it breaks free from the main support unit.
3700300
LOAD ARRESTOR
Inertia-activated shock-absorbing brake with indicator button. Maximum load
is 660 lbs. (300kg), length of cable is 40 ft. (12.2m)
3700400 Load Arrestor, 880 lb. (400kg) load rating x 26 ft. (8m)
3700801 Load Arrestor with pulley, 1,760 lb. (800kg) load rating x 13 ft. (4m)
3700501 Load Arrestor, 1,100 lb. (500kg) load rating x 17 ft. (5.2m)
VERTICAL SYSTEMS
Don’t leave that feeling of security on the ground.
HERE’S Climb with DBI-SALA

A™ systems. We offer the industry’s
premier vertical safety systems — designed to
TO THE GUYS
complement your ability to work. Our vertical systems
meet applicable OSHA and ANSI standards.
WHO DEFY TYPES OF VERTICAL LIFELINE SYSTEMS
A vertical fall protection system allows the worker to move up and down the entire height of the lifeline
GRAVITY FOR rather than having to disconnect and find new tie-off points along the way. Some important
considerations when selecting a system include:
PORTABLE OR PERMANENT
A LIVING.
Temporary jobs require lightweight and easy-to-use portable systems with synthetic lifelines that can
be moved from one location to another. If a structure is accessed often, such as a ladder, tower or tank,
a permanent solution, such as Lad-Saf™ or Railok 90™, is a better choice. Permanent systems require
corrosion resistant galvanized or stainless steel lifelines.
MOBILE OR MANUAL
Mobile rope grab or ladder sleeve designs automatically follow the user for hands-free
operation. Manual devices allow the user to fix the unit in place for positioning or
restraint applications.
ASSISTED
ASSISTED OR NON-ASSISTED
Extremely tall or lengthy structures are often conducive to an assisted system that
Extremely
pprovides
rovides weight relief to reduce worker fatigue and improve climbing longevity.
Most Vertical Systems Equipped with
64 65
VERTICAL SYSTEMS
LAD-SAF™ FIXED LADDER SAFETY SYSTEM LAD-SAF™ FLEXIBLE CABLE SLEEVE
The Lad-Saf ™ sleeve is globally recognized and

preferred because of its user friendly and reliable
• 6116280 design. The sleeve is easily attached or removed
STANDARD TOP BRACKET anywhere along the cable and automatically
LAD-SAF™ FLEXIBLE CABLE Galvanized top bracket with mounting follows you as you climb or descend. In the
LADDER SAFETY SYSTEMS hardware. For systems up to 499 ft. (152m)
event of a fall, the device locks onto the cable
high, fits up to 1-1/8" (2.85cm) rung
lifeline allowing you to regain your footing
diameter, attaches to 3 rungs, built-in
energy absorber. and continue to climb.
The Lad-Saf ™ flexible cable system consists of
a top and bottom bracket that act as anchors
6116410 Standard top bracket and
for a steel cable that runs the length of the
climbing area. A Lad-Saf ™ sleeve connects the
hardware for systems 6116540
over 500 ft. (152.4m). LAD-SAF™ FLEXIBLE
worker to the system, automatically follows the CABLE SLEEVE
user during the climb and locks onto the cable For use with 8mm or 3/8" diameter 1x7 or
VERTICAL SYSTEMS
in the event of a fall, allowing the user to regain 7x19 solid core cable. Comes with 2000112
their footing. Designed for ease of use, economy carabiner. Meets OSHA and ANSI standards.
and versatility, you can bolt or weld the system,
choose rung clamp sizes/styles, choose systems
• 6110000 6116541 Lad-Saf™ Flexible Cable
for straight or curved ladders and for connection
CABLE LIFELINE Sleeve without carabiner.
Galvanized cable, 3/8" (9.5mm) diameter,
to wood, concrete or steel structures.
1x7 type. Last 3 digits in part number
indicate length.
HANDS-FREE CLIMBING AND PROTECTION

The Lad-Saf™ sleeve automatically follows the user, can be attached anywhere
along the cable and locks in the event of a fall.
• 6110400
CABLE GUIDE
Non-metallic cable guide with mounting
TENSION INDICATOR hardware. For systems up to 199 ft.
Integrated tension indicating bottom bracket takes the guesswork out of installation.
(60.6m), fits up to 1-1/8" (2.85cm) rung
CUSTOMIZABLE
diameter. Must have 1 every 25 ft. (7.6m). 6116507
Hundreds of different brackets, styles and configurations to suit almost LAD-SAF™ FLEXIBLE
• 6110515 Cable guide and hardware CABLE SLEEVE
any application.
for systems over 200 ft. (61m). For use with 8mm or 3/8" diameter 1x7
or 7x19 solid core cable. Comes with
CORROSION RESISTANT CONSTRUCTION 2000117 carabiner and
Galvanized and stainless steel construction stands up to harsh environments
for added longevity.
• 6116540 integrated shock absorber for
global compliance.
LAD-SAF™ FLEXIBLE
SHOCK ABSORBING DESIGN CABLE SLEEVE
Integrated shock absorbing top bracket reduces forces imposed on Climbing sleeve - see product details to right.
ladder structure during a fall.
INTERMEDIATE CABLE GUIDES

Prevents cable wear against the ladder and permits the climber to
• 6100090
bypass without disconnecting. STANDARD BOTTOM BRACKET
Fits up to 1-1/8" (2.85cm) rung diameter,
attaches to 2 rungs, tensioning
device, galvanized.
VERTICAL SYSTEMS
LAD-SAF™ STEEL POLE (WELD-ON)

LADDER SAFETY SYSTEM
• 6116261
TOP BRACKET
Weld-on top bracket with built-in
energy absorber and fasteners.
6100710 Stand-off, stainless steel

for use with top bracket.
• 6110000
CABLE LIFELINE LAD-SAF™ CURVED LADDER SAFETY SYSTEM LAD-SAF™ LADDER ACCESSORIES
VERTICAL SYSTEMS
Galvanized cable, 3/8" (9.5mm)
diameter, 1x7 type. Last 3 digits in
6116038
part number indicate length. • 6116010 LADDER MAST
CURVED TOP BRACKET
6116336 6147000 Galvanized removable
• 6100430 Galvanized top bracket with mounting
hardware. Fits up to 1-1/8" (2.85cm) GRAB BAR EXTENSION TELESCOPING EXTENSION
extension with pulleys,
mounting bracket for
CABLE GUIDE rung diameter, attaches to 2 rungs, Slides into 6116054 top Self-contained ladder safety
winch/SRL.
Non-metallic cable guide. Must have built-in energy absorber. bracket of fixed ladder system can be returned to its
1 every 25 ft. (7.6m). safety system and provides stored position when not in
6116027
the user with a tie-off use below the opening so it
Galvanized bottom
6100136 Cable guide support, same point (for lanyard) when can be covered.
mounting bracket
quantity as cable guide(s). connecting or disconnecting • Telescoping top bracket attaches 6116038
from the system’s lifeline. with hardware
to ladder.
• Galvanized cable lifeline
• 6116540 6116054
(order by length – last
LAD-SAF™ FLEXIBLE 6100515 • Top bracket asssembly

three digits in part
number indicate length) 6116026
CABLE SLEEVE CABLE GUIDE for use with 6116336 • Counterweight to LADDER ANCHOR POST
Climbing sleeve - see product details Non-metallic cable guide. Must have 1 (replaces standard tension lifeline Galvanized removable
on previous page. every 25 ft. (7.6m) plus 3 through each 6116280 top bracket). extension with eye-bolt
curved section. anchor to attach 3-way SRL.
• 6100035 6110000 • 6116027
BOTTOM BRACKET Galvanized bottom
Galvanized bottom bracket with CABLE LIFELINE mounting bracket
built-in tensioner. Galvanized cable, 3/8" (9.5mm) diameter,
attaches 6116026
1x7 type. Last 3 digits in part number
to ladder.
6100710 Stand-off, stainless steel indicate length.
for use with bottom bracket.
6116540 • 5901980
LAD-SAF™ FLEXIBLE CABLE SLEEVE LADDER GATE
Climbing sleeve – see product details on Protects you from the
previous page. dangers (and liability) of
unauthorized ladder access.
Angle-iron clamp-on • Fits ladder widths up to
and wood pole bolt-on 6100015 • 20" (50.8cm)
systems also available – BOTTOM BRACKET • Mounting hardware
included
call today. Fits up to 1-1/8" (2.85cm) rung diameter,
attaches to 2 rungs, tensioning device,
• Aluminum construction
galvanized.
• 8 ft. (2.4m) height x 36"
(91.4cm) width
VERTICAL SYSTEMS
RAILOK 90™ STANDARD LADDER RAILOK 90™ INTEGRATED LADDER
™
• 6000352 • 6000354
RAILOK 90 RIGID RAIL TOP LADDER RAIL GATE TOP LADDER RAIL GATE
Aluminum and galvanized steel Aluminum and galvanized steel clamp with
LADDER SAFETY SYSTEMS
clamp with fastening hardware. fastening hardware. Allows user to easily
Allows user to easily attach attach shuttle to the system and prevents
The Railok 90™ rigid rail system shuttle to the system and prevents accidental removal from the system.
accidental removal from the system.
consists of top and bottom entry/exit
gates, rail joints, and multiple • 6000132
mounting bracket options designed
to mount the rigid aluminum rail to
• 6000120 ANGLE IRON CLAMP
Aluminum and galvanized steel clamp with
LADDER RUNG CLAMP fastening hardware. Attaches rail to angled
the structure. A Railok 90™ shuttle
Aluminum and galvanized steel clamp
connects the worker to the system iron structure. Other clamp styles available.
with fastening hardware. Attaches rail to
and locks onto the rail in the event ladder structure. Use within 1 ft. (0.3cm)
of a fall, allowing the user to regain of rail splice and one at least every • 6000298
VERTICAL SYSTEMS
their footing. Designed for ease 5 ft. (1.5m). STEP BOLT
of use and versatility, you can Galvanized steel step bolt with
configure to an existing ladder or fastening hardware. Attaches to
customize a system with integrated
• 6000033 ladder rail to create climbing pegs.
STANDARD RAIL
ladder pegs when no ladder exists.
Anodized extruded aluminum
Various clamps are available to rail x 6.56 ft. (2m).
• 6000100
attach to almost any structure. 6000031 3.28 ft. (1m) rail section RAIL JOINT
6000035 9.84 ft. (3m) rail section Aluminum and galvanized steel rail joint
with fastening hardware. Attaches two
rail sections together.
• 6000100 • 6000307
RAIL JOINT LADDER RAIL
SHOCK ABSORBING DESIGN Aluminum and galvanized steel rail Anodized extruded aluminum rail
Integrated metallic energy absorber in shuttle reduces joint with fastening hardware. Attaches with step bolt holes x 7.87 ft. (2.4m).
forces imposed on system and worker. two rail sections together. 6000301 1.96 ft. (0.6m) ladder rail section
6000302 2.95 ft. (0.9m) ladder rail section
HANDS-FREE CLIMBING AND PROTECTION 6000303 3.93 ft. (1.2m) ladder rail section
The Railok 90™ shuttle automatically follows the user 6000304 4.92 ft. (1.5m) ladder rail section
and locks in the event of a fall. • 6000377 6000306 5.90 ft. (1.8m) ladder rail section
RAILOK 90™ SHUTTLE
LADDER RUNG CLAMPS Climbing shuttle automatically • 6000377
Provide multiple anchor points to the structure for follows user and locks onto rail
added safety. during fall. RAILOK 90™ SHUTTLE
Climbing shuttle automatically follows
user and locks onto rail during fall.
CUSTOMIZABLE
Many different clamps and configurations available
• 6000375
to suit almost any need. BOTTOM STANDARD RAIL GATE • 6000375
Aluminum and galvanized steel clamp BOTTOM LADDER RAIL GATE
with fastening hardware. Allows user Aluminum and galvanized steel clamp
CORROSION RESISTANT CONSTRUCTION to easily attach shuttle to the system
Aluminum, stainless steel and galvanized construction with fastening hardware. Allows user
and prevents accidental removal from to easily attach shuttle to the system
stands up to harsh environments for added longevity.
the system. and prevents accidental removal from
the system.
VERTICAL SYSTEMS
LAD-SAF™ POWERED CLIMB ASSIST LADDER SAFETY SYSTEM
• EASY-MOUNT BRACKETS
Optimizes installation by providing built-in
LAD-SAF POWER™ bracket hangers.
STEEL LIFELINE •
CLIMB ASSIST LADDER Improves durability for extended product life and safety. POWERED CLIMB ASSIST
Provides weight relief to reduce worker fatigue
SAFETY SYSTEM and improve climbing longevity.
The Lad-Saf ™ Powered Climb Assist

FALL ARREST RATED
System was specifically developed
In the event of a fall, the system
to provide both climbing assistance will lock, arresting the user –
and fall protection for those who no secondary system required. • 2-IN-1 SYSTEM
climb the internal ladders of wind Offers both climbing assistance and fall
VERTICAL SYSTEMS
protection, saving time and money by simplifying
turbines. This unique system does
safety and increasing worker productivity.
not require a separate or secondary ADJUSTABLE
fall protection system, which is ASSIST RANGE •
unlike any other system on the Personalize from 45-120 lbs.
(20-55kg) for a wide range
market today. Our “dual” system
of climbing styles and user
approach saves time and money, weights for effortless ascent
simplifies safety and increases • SWAGELESS LIFELINE TERMINATIONS
and descent.
Allows fast and easy installation.
worker productivity.
PLUG-AND-PLAY DESIGN
6160006 Plug control box into power outlet and motor and you’re
ready to climb. Can be transported to support multiple
LAD-SAF™ POWERED
systems. 110V and 220V options available, adapting to
CLIMB ASSIST SYSTEM
50 or 60 Hz, ensuring global compatibility.
Includes top and bottom brackets and motor
assembly. Must order lifeline, sleeve and control
box separately and intermediate cable guide, if
required.
6170000
CABLE LIFELINE
Galvanized cable lifeline assembly with
swageless terminations. To order, double
the length of the ladder and add 20 ft. (6m).
Last three digits in part number indicate
length needed.
6160003 9505106
110V CONTROL PANEL
CABLE GUIDE Control panel for Lad-Saf ™ powered climb
Intermediate cable guide can be used to prevent assist system.
the cable from abrading against the ladder rungs,
if needed.
9504786 220V CONTROL PANEL
Control panel for Lad-Saf ™
powered climb assist system.
VERTICAL SYSTEMS
ROPE GRABS
5000335
LAD-SAF™ ROPE GRAB (AUTO)
• Mobile design automatically follows user for
SSB CLIMB ASSIST SYSTEM hands-free operation
• 3511063 • Detachable design can be attached or removed
anywhere along lifeline
The DBI-SALA™ SSB Climb Assist SSB SAFETY BLOCK
Climb assist main block pulley assembly. • Inertia and cam locking systems for safety
System, with external counterweight, and to prevent “panic-grab”
aids workers and provides fall • For use on 5/8" (16mm) polyester/
polypropylene rope lifeline
protection while climbing lengthy
• Use with 3 ft. (0.9m) shock absorbing lanyard
ladders and towers. It’s ideal for use • 3512000
on land-based and offshore drilling LIFELINE ASSEMBLY 5002042 Lad-Saf ™ rope grab with attached 1242007 EZ-Stop™
platforms, where environmental and Galvanized 1/4" (6.3cm) 7x19 cable assembly shock absorbing lanyard x 3 ft (0.9m).
with rung and belt hook (last three digits in part
work conditions can make climbing
number signify length).
ladders hazardous.
VERTICAL SYSTEMS
• Counterweight includes a
3530000 Stainless steel lifeline assembly. 1224005
runaway brake for added safety EZ-STOP™ ROPE ADJUSTER (MANUAL)
• No limit to length of system for
• Manual design allows user to fix unit in place for 5000400
ultimate flexibility
• 3511783 positioning or restraint
ROPE GRAB KIT
MOUNTING BRACKET • Attached 2 ft. (0.6m) shock absorbing lanyard Complete rope grab system in a bag for convenient
• Durable aluminum housing and
steel drum for durability and
Attaches safety block to structure. Fits round rungs • For use on 5/8" (16mm) polyester/polypropylene compliance and safety on the job.
up to 3/4" (1.9cm) diameter or square rungs up to rope lifeline
corrosion resistance Kit includes:
9/16" (1.4cm) per side.
• Mobile Rope Grab (5000335)
3511785 Mounting bracket, fits round rungs • Shock Absorbing Lanyard (1242007)
over 3/4" (1.9cm) up to 1-3/8" (3.5cm) diameter or • Lifeline x 50 ft. (1202794)
square rungs over 9/16" (1.4cm) and up to 1-3/4" 5000338 • Counterweight (5901583)
(4.4cm) per side. LAD-SAF™ WIRE ROPE GRAB (MANUAL) • Tie-Off Adaptor (1003000)
• Manual design allows user to fix unit in place for • Carrying Bag (9511597)
positioning or restraint
• For use in extremely abrasive or corrosive 5000401 Rope grab kit with 100 ft.
environments (30m) lifeline (1202844)
• For use on 3/8" (9.5mm) 7x19 galvanized or and (9503806)
• 3511598 stainless steel cable carrying bag.
COUNTERWEIGHT ASSEMBLY • Use with 4 ft. (1.2m) shock absorbing lanyard
80 lb. (36.3kg) counterweight with integrated
runaway brake system.
Rope Lifelines
DBI-SALA™ blended rope lifeline assemblies feature additional abrasion

and UV resistance, for added durability, longevity and safety. Various styles and
lengths are available to suit any need.
5901583
Lifeline Lifeline 75' Lifeline 100' Lifeline 150' Lifeline
Hook 30' Lifeline 50' Lifeline
Material Style
Diameter
(9m) (15m) (22m) (30m) (46m) COUNTERWEIGHT 5.7 lb. (2.6kg) flexible
(inch/mm)
counterweight keeps lifeline taught.
Snap Hook
Polyester/ at One End 5/8" 1202754 1202794 1202821 1202844 1202879
Polyproplyene (15.9mm)
Blend Snap Hook 1202753 1202790 1202823 1202842 1202878
at Both Ends
HORIZONTAL SYSTEMS
You can always depend on our horizontal safety systems
for mobility and fall protection when working at height.
SOME SAY WE That’s why safety engineers and site directors choose
DBI-SALA™ horizontal lifelines. We offer the broadest
selection, as well as significant advantages in safety and
OVER-ENGINEER productivity. Systems meet OSHA standards.
LIFELINES. HOW TO CHOOSE A HORIZONTAL LIFELINE SYSTEM
A horizontal lifeline may appear to be a basic line strung between two anchors,
but it is not. It is critical to choose a system that has been precision engineered
WE SAY YOU and rigorously tested to meet OSHA and ANSI requirements. These systems are
used to protect workers operating in the horizontal plane who may
not have continuous access to suitable anchorage points. Some
important considerations when selecting a system include:
CAN’T ANCHORAGE STRUCTURE

The structure your system must attach to, such as an I-beam, rebar stud,
concrete column or roof, can dictate the type of specialized system required.
OVER-DO PORTABLE OR PERMANENT

Temporary jobs require lightweight and easy-to-use portable
systems that can be moved from one location
to another. If a hazardous work
SAFETY. area is accessed often, such as a

rooftop, a permanent solution like
evolution™ may be a better choice.
CLEARANCE REQUIREMENTS
The distance between the work area and the next
level or obstruction is often called “fall clearance,”
and this is a critical factor when choosing your system. Anchorage
height, type of lifeline and length are just a
couple of factors that will affect the required clearance needed.
LIFELINE TYPE
Synthetic lines are extremely lightweight and compact while galvanized
or stainless steel options offer added corrosion and abrasion resistance.
NUMBER OF USERS
Always consider the number of workers required to get the job done and
choose a system that can accommodate those personnel safely.
Most Horizontal Lifelines Equipped with
76 77
HORIZONTAL SYSTEMS
CONCRETE LOOP REBAR APPLICATIONS
SECURASPAN™ HORIZONTAL LIFELINE SYSTEMS An easy-to-install system for pre-stressed concrete beams, this attaches directly to the loop
rebar. With integrated “bypass” brackets, the system can be configured to run indefinitely.
Extremely lightweight and portable, these systems incorporate a modular, • Simple hook and loop with wing nut
• Fits 1/2" to 4-1/2" dia. (#4 to #12 rebar)
multi-base design that accommodates a wide range of steel and concrete beams.
• Adjusts to fit 3-1/2" to 8" (8.9-20.3cm) tall loop with 3" (7.6cm) or greater spacing
• Interchangeable stanchions are ideal for both steel and concrete applications
• Extremely lightweight and portable for fast and easy set-up and use SECURASPAN™ LOOP REBAR HORIZONTAL
• Single and multi-span options available for jobsite customization LIFELINE SYSTEM
• Pass thru bracket design provides 100% continuous protection Complete single span system includes 2 stanchions (7400045) and cable assembly
• Integrated Zorbit™ energy absorber limits forces on structure with tensioner and Zorbit™ energy absorber.
• Capacity of 2 workers per span, up to 6 workers for multi-span system 7400320 20 ft. (6.1m) SecuraSpan™ Loop Rebar HLL System
• Durable and corrosion resistant construction
7400330 30 ft. (9.1mm) SecuraSpan™ Loop Rebar HLL System
7400340 40 ft. (12.2m) SecuraSpan™ Loop Rebar HLL System
7400350 50 ft. (15.2m) SecuraSpan™ Loop Rebar HLL System

Note: Shown with intermediate
7400360 60 ft. (18.3m) SecuraSpan™ Loop Rebar HLL System stanchion – must order separately.
STEEL I-BEAM CONCRETE REBAR & SHEAR STUD
APPLICATIONS APPLICATIONS
This lightweight and extremely easy to install engineered fall protection Provides tie-off point before decking or other fall protection is available on
H O R I ZO N TA L S Y S T E M S
SECURASPAN™ SYSTEM COMPONENTS
system is ideal for steel construction. Single spans up to 60 ft. and with the pre-stressed concrete beams with rebar or shear studs. Stanchions are
optional “bypass” brackets, the system can be configured to run indefinitely. adjustable from vertical 20 degrees left or right for easy passage, or
I-BEAM REBAR LOOP
• Single clamp and wing nut design completely horizontal for transportation to jobsite.
SYSTEM SYSTEM SYSTEM
• All adjustments made from top of beam • Simply attach with torque wrench
COMPONENTS COMPONENTS COMPONENTS
• Fits flanges 6" to 12" wide, 2-1/4" thick (15.2-30.5cm, 5.7cm) • Simple chain tie-back connection
• Optional bases for 18", 24" and 36" widths (45.7, 60.9 and 91.4cm) • Fits 1/2" to 1" diameter (#4 to #8 rebar) and 4" to 12" center to center
SECURASPAN™ I-BEAM HORIZONTAL SECURASPAN™ REBAR/SHEAR STUD 7400047 Stanchion with I-beam base, fits 6"-12" 7400215 Stanchion with rebar/shear stud base, 7400045 Stanchion with loop rebar base and
LIFELINE SYSTEM HORIZONTAL LIFELINE SYSTEM (15.2-30.5cm) flange pass thru and end anchor brackets pass thru bracket
Complete single span system includes 2 stanchions (7400047) and cable Complete single span system includes 2 stanchions (7400215) and cable 7400055 Stanchion with I-beam base, fits 12"-18" 7400214 Tie-back base and chain assembly CLEARANCE CHART
assembly with tensioner and Zorbit™ energy absorber. assembly with tensioner and Zorbit™ energy absorber. (30.5-45.7cm) flange
7400053 End-anchor retro-fit kit with rebar/shear
7400420 20 ft. (6.1m) SecuraSpan™ I-beam HLL System 7400620 20 ft. (6.1m) SecuraSpan™ Rebar/Shear Stud HLL System 7400056 Stanchion with I-beam base, fits 18"-24" stud base, tie-back assembly, SPAN
1-2 USERS
1-2 USERS
(45.7-61cm) flange end-anchor and pass thru bracket 6' (1.8m)
LENGTH SRL
LANYARD
7400430 30 ft. (9.1m) SecuraSpan™ I-beam HLL System 7400630 30 ft. (9.1m) SecuraSpan™ Rebar/Shear Stud HLL System
7400057 Stanchion with I-beam base, fits 24"-36" 7400054 Intermediate retro-fit kit with rebar/shear
20-30 ft. 16'-7" 13'-2"
7400440 40 ft. (12.2m) SecuraSpan™ I-beam HLL System 7400640 40 ft. (12.2m) SecuraSpan™ Rebar/Shear Stud HLL System (61-91.4cm) flange stud base and pass thru bracket (6.1m-9.0m) (5.1m) (4m)
7400450 50 ft. (15.2m) SecuraSpan™ I-beam HLL System 7400650 50 ft. (15.2m) SecuraSpan™ Rebar/Shear Stud HLL System 7400052 I-beam base only, fits 6"-12"
(15.2-30.5cm) flange 50-60 ft. 20'-2" 16'-8"
7400460 60 ft. (18.3m) SecuraSpan™ I-beam HLL System 7400660 60 ft. (18.3m) SecuraSpan™ Rebar/Shear Stud HLL System (15.4-18.5m) (6.2m) (5.1m)
7400008 Intermediate bypass bracket kit
NOTE: See product instruction manual for complete
clearance information.
LIFELINE OPTIONS FOR ALL SYSTEMS

Cable assembly with turnbuckle and Zorbit™, lengths available in 10 ft. increments. Cable assemblies over 60 ft. (18.3m) include two Zorbit™ devices.
20 ft. 30 ft. 40 ft. 50 ft. 60 ft. 70 ft. 80 ft. 90 ft.
(6.1m) (9.1m) (12.2m) (15.2m) (18.3m) (21.3m) (24.4m) (27.4m)
7403020 7403030 7403040 7403050 7403060 7403070 7403080 7403090
(30.5m) (33.5m) (36.6m) (39.6m) (42.7m) (45.7m) (48.8m) (51.8m)
7403100 7403110 7403120 7403130 7403140 7403150 7403160 7403170
(54.9m) (57.9m) (61.0m) (64.0m) (67.1m) (70.1m) (73.2m) (76.2m)
7403180 7403190 7403200 7403210 7403220 7403230 7403240 7403250
Note: Shown with intermediate Note: Shown with intermediate 260 ft. 270 ft. 280 ft. 290 ft. 300 ft. 310 ft. 320 ft. 330 ft.
stanchion – must order separately. stanchion – must order separately. (79.8m) (82.3m) (85.3m) (88.4m) (91.4m) (94.5m) (97.5m) (100.6m)
7403260 7403270 7403280 7403290 7403300 7403310 7403320 7403330
HORIZONTAL SYSTEMS
SAYFLINE™ CABLE HORIZONTAL LIFELINE SYSTEMS
The Sayfline™ cable system is highly portable • Durable all-metal system can be left in place for long
and ideal for situations where welding, periods of time
sparks or harsh environments are • Portable system can be re-used over and over again
present, or where minimal • Cable lifeline with tensioner and shock absorber
clearance exists. Complete
• Use with any 5,000 lb. (22kN) anchorage devices
system includes cable lifeline
• Capacity of 2 workers
assembly with wedge grip
termination, tensioner and • 20 ft. to 100 ft. lengths available (6.1m to 30.5m)
Zorbit™ shock absorber.
CLEARANCE CHART
SPAN LENGTH 1-2 USERS 6' (1.8m) LANYARD 1-2 USERS SRL
20-30 ft. (6.1m-9.0m) 20'-6" (6.3m) 9'-1" (2.8m)
50-60 ft. (15.4-18.5m) 24'-5" (7.4m) 12'-5" (3.8m)
NOTE: See product instruction manual for complete clearance information.
SAYFLINE™ CABLE HLL SYSTEMS

20 ft. 30 ft. 40 ft. 50 ft. 60 ft. 70 ft. 80 ft. 90 ft. 100 ft.
(6.1m) (9.1m) (12.2m) (15.2m) (18.3m) (21.3m) (24.4m) (27.4m) (30.5m)
7602020 7602030 7602040 7602050 7602060 7602070 7602080 7602090 7602100
SAYFLINE™ SYNTHETIC HORIZONTAL

LIFELINE SYSTEMS
7605060 Sayfline™ systems are extremely lightweight,
™
EZ-LINE RETRACTABLE HORIZONTAL LIFELINE SYSTEM easy to install and portable – ideal for
EZ-Line™ is user friendly and extremely fast to install, remove and store. The maintenance, bridge work, construction
innovative retractable design of EZ-Line™ eliminates large and bulky coils of and general industry applications, providing
cable that are difficult to set-up, relocate and store. absolute safety and reliability.
• Complete system in convenient bag is installed with no

special tools or equipment
• Portable system can be re-used over and over again
• Built-in winch for fast and easy set-up, use and dismantling • Kernmantle rope lifeline with tensioner and shock absorber CLEARANCE CHART
• Customize length in any increment up to 60 ft. (18.25m) • Two tie-off adaptors are included to anchor the system to a structure
SPAN LENGTH 2 USERS 6' (1.8m) LANYARD 2 USERS SRL
• Built-in pre-tension and impact indicators for easy set-up and inspection • Capacity of 2 workers 20-30 ft. (6.1m-9.0m) 23'-4" (7.1m) 11'-6" (3.5m)
• Extremely lightweight, 33% lighter than conventional systems • 20 ft. to 100 ft. lengths available (6.1m to 30.5m) 50-60 ft. (15.4-18.5m) 30'-2" (9.2m) 18'-3" (5.5m)
• Capacity of 2 workers
SAYFLINE™ SYNTHETIC HLL SYSTEMS
CLEARANCE CHART
20 ft. 30 ft. 40 ft. 50 ft. 60 ft. 70 ft. 80 ft. 90 ft. 100 ft.
SPAN LENGTH 2 USERS 6' (1.8m) LANYARD 2 USERS SRL (6.1m) (9.1m) (12.2m) (15.2m) (18.3m) (21.3m) (24.4m) (27.4m) (30.5m)
20-30 ft. (6.1m-9.0m) 21'-6" (6.6m) 9'-10" (3.0m)
7600502 7600503 7600504 7600505 7600506 7600507 7600508 7600509 7600510
50-60 ft. (15.4-18.5m) 25'-4" (7.7m) 12'-4" (3.8m)
HORIZONTAL SYSTEMS
SECURASPAN™ POUR-IN-PLACE
HORIZONTAL LIFELINE SYSTEMS
The Pour-in-Place SecuraSpan™ system installs to column tops, providing an

overhead tie-off point during the decking process. The stanchion slides into the
embedded pour-in-place sleeve and does not require “tie-back”
for fast installation.
• Lightweight and portable for fast and easy set-up and use
• Single and multi-span options with unlimited length for jobsite customization
• Pass thru design provides 100% continuous protection
• Integrated Zorbit™ energy absorber limits forces on worker and structure
• Capacity of two workers per span, up to six workers for multi-span system
• Durable and corrosion resistant construction
SAYFLINE™ POUR-IN-PLACE HLL SYSTEMS

Complete system includes 2 stanchions (7400203), and cable assembly with
tensioner and Zorbit™ energy absorber.
20 ft. (6.1m) 30 ft. (9.1m) 40 ft. (12.2m) 50 ft. (15.2m) 60 ft. (18.3m)
7400220 7400230 7400240 7400250 7400260
CLEARANCE CHART
SECURASPAN™ POUR-IN-PLACE ACCESSORIES
SPAN LENGTH 1-2 USERS SRL
20-30 ft. (6.1m-9.0m) 9'-1" (2.8m)
7400203 Stanchion assembly, 7'6" tall 50-60 ft. (15.4-18.5m) 12'-5" (3.8m)
NOTE: See product instruction manual for complete
7400200 Intermediate bracket, Pour-In-Place stanchion clearance information.
7400201 Concrete sleeve for Pour-In-Place stanchion
HORIZONTAL LIFELINE COMPONENTS
The revolutionary Zorbit™ energy absorber and wedge grip termination featured on our
Sayfline™ cable horizontal lifeline system is also available to customize your
existing system. A competent and qualified person must be
involved who fully understands how to properly engineer a custom system.
• Allows use of standard 5,000 lb. (22kN) rated anchors

• Lightweight and compact for easy set-up and use
• Simple design makes integration into system fast and easy
ZORBIT™ KITS
7401013 Zorbit™ energy absorber only
7401031 Zorbit™ energy absorber, 2 shackles, bolts, nuts
7401032 Zorbit™ energy absorber, with 2 shackles, bolts, nuts, turnbuckle
7401033 Zorbit™ energy absorber, with 2 shackles, bolts, nuts, turnbuckle,

thimbles, cable clips
7600580 Zorbit™ energy absorber, with 2 shackles, bolts, nuts, turnbuckle,

thimbles, cable clips with wedge grip, two o-rings
7608008 Wedge grip horizontal lifeline termination
HORIZONTAL SYSTEMS
PERMANENT HORIZONTAL
LIFELINES
Whether it’s over a railcar, tanker truck, airplane,

along a rooftop, in the rafters of an arena or on
SAYFLINE™ MULTI-SPAN HORIZONTAL LIFELINE SYSTEMS
a bridge, DBI-SALA™ permanent horizontal lifeline
systems provide remarkable ease-of-use with The Multi-Span Sayfline™ system is a simple and safe “off-the-shelf” permanent horizontal lifeline system
superior “hands-free” continuous fall protection. designed for user installation. It is completely customizable, including span length, total system length and
even final installation position.
We offer both pre-engineered user installed systems, • Provides 100% continuous protection for two workers
or customized site specific systems offering straight • Unique one-piece sleeve bypasses intermediates hands-free
• Customize to suit jobsite, 180 ft. (54.9m) max length, 30 ft. (9.1m) max span
or curved, flexible or rigid installations. We have also
• Unique brackets can be installed above, even with or below the user
taken the guesswork and complexities out of these • System includes lifeline, intermediate bracket (one per 30 ft. span), termination hardware, tensioner and two
types of systems by partnering with a network of Zorbit™ energy absorbers. Order sleeve and additional intermediates separately.
certified installers throughout the country that are
SAYFLINE™ ACCESSORIES
able to offer complete turnkey solutions, including SAYFLINE™ MULTI-SPAN HLL SYSTEMS
everything from site assessment and anchorage 7608001 Intermediate bracket, 40 ft. 60 ft. 80 ft. 100 ft. 120 ft. 140 ft. 160 ft. 180 ft.
design to system installation and training. multi-span system (12.2m) (18.3m) (24.4m) (30.5m) (36.6m) (42.7m) (48.8m) (54.9m)
7608002 Sayflink™ sleeve for Sayfline™ 7603040 7603060 7603080 7603100 7603120 7603140 7603160 7603180
We will even work with project architects and multi-span system
engineers to ensure the system is fully integrated
into the facility without conflicting with other
building systems.
I-BEAM AND TROLLEY SYSTEM
Our man-rated trolleys provide continuous horizontal mobility

on I-beams. Used in conjunction with a self retracting lifeline,
the system provides fall
protection with horizontal
and vertical mobility.
These systems can often
be used on existing
overhead I-beams, and
they’re sometimes the
only choice when it is not
possible to accommodate
the loads generated by a cable type multi-span horizontal
Image shown: evolution™ system
lifeline system. In addition, rigid systems eliminate sag and
with StrongArm™ frames
deflection, reducing the overall fall clearance needed below
the work area. See page 95 for further details on the trolley.
HORIZONTAL SYSTEMS
evolution™ SHUTTLE
Provides hands-free bypass of the intermediates and maximum
freedom of movement, allowing
user to attach or detach from the
lifeline at any point along the system.
evolution™
A NEW GENERATION OF FIXED INTERMEDIATE BRACKETS
HORIZONTAL LIFELINES Allow automatic passage of the shuttle and can
be installed in many different configurations and at
The evolution™ horizontal lifeline system regular intervals to ensure optimum distribution of forces.
is a permanent, low tension, multi-span

lifeline used for fall protection on elevated
horizontal surfaces. The fully engineered
CURVED INTERMEDIATE BRACKETS
system will allow up to five users to move A wide range of curved components are available to suit the needs of almost any site.
from one end to another in a truly
“hands-free” environment. The unique
design integrates with almost any structure
LEAP™ ENERGY ABSORBER
while complementing the aesthetics of the The device protects the worker as well as the
buildings on which it is installed. Our structure and is set-up for each installation.
specially designed computer program
simulates the necessary clearances and
possible heights of fall and validates the POSTS
Thanks to a combination of LEAP-integrated posts and bases, evolution™ offers
compatibility of the structures with the ideal solutions for industrial roofs (trapezoid panels, standing seam, membrane,
lifelines, no matter how complex. etc.). It doesn’t affect the integrity of the structure in any way.
ANCHORS AND SWAGING

To ensure the optimum anchorage, we’ve developed an
articulated anchorage. It aligns accurately with the cable in
any direction. To guarantee a faultless link between cable and
anchorage, swaging preserves the full strength of the cable at its connection with the end parts.
Visit www.horizontallifeline.com for additional information or to locate an installer near you.
evolution™ 200 SINGLE SPAN SYSTEMS
DBI-SALA™ is also able to supply a high-tension system capable of

spanning up to 200 ft. when anchored to our StrongArm™ frames.
The evolution™ 200 system is ideal when the work site cannot
accommodate frequent intermediate supports without interfering
with production activities.
Call us today for details.
HORIZONTAL SYSTEMS
TRAM™ MOBILE
A mobile TRAM™ system incorporates a rail that allows the TRAM™ arm to travel from one end to the other on a work platform. The TRAM™ can be customized with a
BRAKE AND CLUTCH LEVERS • • TRAM™ ARM rotating base or extended arm to provide ultimate reach. The rail length is custom-based on your application.
Allows operator to quickly and Three position settings –
easily reposition arm and vertical, horizontal and 7301101 Mobile TRAM™ standard unit, left hand
base or lock in place. 45 degrees for complete
protection from ladder 7301102 Mobile TRAM™ standard unit, right hand
transition to platform.
TRAM ™
7301103 Mobile TRAM™ standard unit, extended arm, left hand
7301104 Mobile TRAM™ standard unit, extended arm, right hand

TRAM™ fall protection systems provide a 7301105 Mobile TRAM™ rotating base
safe means for workers to access and work
7301106 Mobile TRAM™ rotating base, shortened arm
on the top of all types of road tankers, ISO
7301107 Mobile TRAM™ rotating arm
tanks, and static tanks for various industrial,
mining, defense and transportation 7301108 Mobile TRAM™ extended rotating arm
applications. The TRAM™ system is

comprised of the TRAM™ unit, harness, rail
TRAM™ FIXED
and mounting hardware, providing the user The fixed TRAM™ consists of a pivoting arm without a rail and is used in applications where
with an ideal system of mobility, stability movement along a specified path is not needed. A rotating arm can be added to provide greater
access to the designated work area.
and restraint. It prevents falls from the
platform or walkway, but also protects the 7301200 Fixed TRAM™ base, left hand
• ANCHOR POINTS
user during the critical transition between
Built-in for simple and fast tie-off and protection. 7301201 Fixed TRAM™ base, right hand
the ladder and the work surface. 7301202 Fixed TRAM™ base, rotating arm
7301203 Fixed TRAM™ base, extended rotating arm
7301204 Fixed TRAM™ base, extended arm, left hand
ISO CONTAINER TRAM™

The system is comprised of a rail-mounted TRAM™ unit fixed to a transportation frame. The frame
• GAS PISTON is lifted into place by a forklift and then locked into position at the ISO connections. It can be
Controls pivoting to assist user in the transition
supplied with or without a ladder and walkway.
between ladder and walkway.
7301001 ISO Container TRAM™, 20 ft. (6.1m) with walkway and ladder.
• RAIL
Stainless steel with welded cleats attaches to the
vehicle or equipment via mounting.
EASY AS
STEP ONE STEP TWO STEP THREE
1102245 1102264 1231637
™
Clip onto TRAM while climbing Safely transition to top of container. Move along top and conduct work. DELTA™ TRAM™ HARNESS EXOFIT™ TRAM™ HARNESS TRAM™ LANYARD
on the ladder. Back and side D-rings with Back and side D-rings with 2 ft. Adjustable TRAM™ positioning lanyard
2 ft. (0.6m) side positioning (0.6m) side positioning with snap hook at one end, carabiner
• BASE lanyards, pass thru legs. lanyards, quick connect at other x 2 ft. (0.6m). For use with
Adjustable rollers ensure smooth operation and
allow for easy installation. (Universal size) buckles. (XLarge) your existing harness.
1102246 Small 1102261 Small
1102247 Large 1102262 Medium
1102263 Large
ANCHORAGE CONNECTORS
THE MORE YOU Smart guys look at DBI-SALA™

anchorage connectors first.
TRUST AN ANCHOR, In the excitement of the moment,

remember that each DBI-SALA™
THE MORE YOU anchorage connector has been

rigorously tested to meet or exceed
OSHA and ANSI standards. We offer
ENJOY THE VIEW. the most complete line of anchorage

connectors available today, so you’ll
always find the best product to meet
the demands of your job.
Most Anchors Equipped with
90 91
AANNCCHHOORR AA G E C O NNNNEECCTTOORRSS
SAFLOK™ CARABINERS
GENERAL
TYPES OF ANCHORAGE CONNECTORS
ONNECTORS Saflok™ carabiners are the unsung heroes of most safety systems.
They securely attach one component to another and offer maximum
ANCHORS Extremely versatile anchors arere simply choked-off

to the anchorage structure, too provide a fast
and safe 5,000 lb. (22kN) tie-off
-off point for
strength – 5,000 lb. (22kN) minimum breaking strength and
3,600 lb. (16kN) gate strengths. Designed for easy securing, they are
self closing and self locking to keep all components of your safety
Your choice of anchor depends on the type of your personal fall protection system. system firmly attached, including you!
work being done. Anchorages are sold by what
they connect to (general/all purpose, steel,

1003000 2000112
concrete, roof or specialty), whether they are SAFLOK™ CARABINER
WEB TIE-OFF ADAPTOR
Steel carabiner with 3,600 lb. (16kN) self
fixed or mobile, and whether they are permanent Pass thru design. 1-3/4" polyester strength member with 3" wide
closing/locking gate, 11/16" (17.5mm) opening.
polyester wear pad x 3 ft. (0.9m).
or portable. They all must provide a secure point
1003006 Web tie-off adaptor, pass thru type x 6 ft. (1.8m)
of attachment for a complete personal fall arrest
1002103 Adjustable web tie-off adaptor, pass thru type x 3 ft. (0.9m)
2000113
system, and must be capable of supporting a load SAFLOK™ CARABINER
1002106 Adjustable web tie-off adaptor, pass thru type x 6 ft. (1.8m)
Steel carabiner with 3,600 lb. (16kN) self
of 5,000 lbs. (22kN) or of meeting OSHA’s criteria closing/locking gate, 1-3/16" (30mm) opening.
of a 2-to-1 safety factor.
1002202 2000114
®
KEVLAR TIE-OFF ADAPTOR
PTOR SAFLOK™ CARABINER
®
Kevlar web is ideal for high
gh heat environments, Steel carabiner with 3,600 lb. (16kN) self
pass-thru type with 1-3/4" polyester strength closing/locking gate, 2-3/16" (55.5mm) opening.
A N C H O R AG E C O N N E C TO R S
member x 6 ft. (1.8m).
1002200 Kevlar ® tie-off

ff adaptor, pass thru type x 3 ft. (0.9m) 2000200
1002201 Kevlar ® tie-off
ff adaptor, pass thru type x 4 ft. (1.2m) SAFLOK™ CARABINER
Stainless steel carabiner with 3,600 lb. (16kN) self
closing/locking gate, 11/16" (17.5mm) opening.
2000300
SAFLOK™ CARABINER
5900550 Steel carabiner with 3,600 lb. (16kN) self closing/
triple-action locking gate, 2" (50.8mm) opening.
CABLE TIE-OFF ADAPTOR
DAPTOR
GENERAL Pass thru design. 7x19-3/8"
x19-3/8"
(ALL-PURPOSE) STEEL CONCRETE (9.5mm) stainless steel
teel cable with 2000301
Portable anchors used in a variety of applications. Our anchors for steel are lightweight and These rugged and extremely abrasive O-rings x 4 ft. (1.2m).
m). SAFLOK™ CARABINER
Many are “choker” style, designed to provide a safe easily installed. A variety of portable, resistant portable and permanent anchors Stainless steel carabiner with 3,600 lb. (16kN)
and easy way to anchor a fall protection device to an permanent, mobile and fixed anchors are are specifically designed to be attached to 5900551 Cable tie-off adaptor, pass thru type x 6 ft. (1.8m)
self closing/triple-action locking gate, 2"
overhead location that is beyond normal reach. available for connection to I-beams and concrete structures including walls, floors, (50.8mm) opening.
other steel structures. decks and columns.
ROOF SPECIALTY
A variety of portable and permanent roof Specifically designed to attach to
anchors for residential and commercial, challenging anchorage structures, 1201390
as well as for flat or sloped roofs, are these devices are unique. If you WEB SCAFFOLD CHOKER
OKER
available. These specialized anchors will can’t find a suitable anchor for your Choker style attaches too 3" (76mm) diameter
keep you safe without causing application, call us and we’ll work anchorage. 1" (25mm) polyester strength
damage to the structure. together to provide a solution. member x 17" (43cm).
1201391 Web scaffold

ffold choker x 24" (61cm)
2103143
STEEL TROLLEY FOR I-BEAM
The trolley is for use with self retracting lifelines on horizontal beams and
ANCHORAGE CONNECTORS has been engineered for ease-of-use and superior performance. Glides
effortlessly along the beam and provides horizontal mobility.
Extremely versatile anchors for steel are lightweight and compact, • Attachable anywhere along beam, including midpoint
providing an easy to install and safe 5,000 lb. (22kN) tie-off point for • Non-corrosive double-shielded wheel bearings are maintenance free
your personal fall protection system. • Trolley Guards protect the wheels from damage and keep beam
clear of debris
• Fits 3" to 8" flange width thickness up to 11/16"
2103147 Trolley for I-Beam, all stainless steel, fits 3" to 8" flange
width thickness up to 11/16"
2101630
D-RING ANCHORAGE PLATE
The D-ring anchorage plate can be bolted or
welded to a structure, offering a compact, reliable
2104700 connection point for your fall protection system.
GLYDER™ 2 SLIDING BEAM ANCHOR • Two ½" diameter attachment holes
Provides complete horizontal mobility on I-beams, attach overhead or at • Cadmium plated steel D-ring
your feet (use with Force2™ shock absorbing lanyard when used at your feet). • 304 stainless steel anchorage plate
• Wear pads eliminate metal-to-metal contact, for smooth operation • Plate size: 1/4" x 2" x 4-1/2"
• Integrated ratcheting adjustment system for easy installation
• Dual beam grip adjustment prevents twisting and turning 2101634 D-ring Anchorage Plate with cadmium plated steel D-ring,
• Extremely lightweight at only 3.7 lbs. (1.66kg) raw steel anchorage plate
• User capacity of 420 lbs. (189kg) 2101636 D-ring Anchorage Plate with 304 stainless steel D-ring and
• Fits flange 3-1/2" to 14" wide and up to 1-1/4" thick anchorage plate
2101638 D-ring Anchorage Plate with 316 stainless steel D-ring and
anchorage plate
2108406 2104550
FIXED BEAM ANCHOR STEEL PLATE ANCHOR
It installs in seconds to the beam structure in any orientation, with final This plate anchor offers a
tightening using a built-in adjustment handle. Ideal as a single-person compact, reliable attachment
anchor point or as end-anchors for a Sayfline™ horizontal lifeline system. to 3/8" to 1" thick plate steel
2110941 Fits up to 1-1/2" thick beam flange, 2-1/2" to 12" wide. for connecting your lanyard,
GLYDER™ SLIDING BEAM ANCHOR vertical lifeline system
The original Glyder™ has most of the features of Glyder™ 2, except the
2108407 Fixed Beam Anchor, fits up to 1-1/2" thick x 2-1/2"-18" or self retracting lifeline.
wide beam flange
adjustment system is detent pin type and fits larger beam sizes. Fits flange • Easy to use set-screw
6"-18" wide and up to 2-1/2" thick.
2108408 Fixed Beam Anchor, fits up to 1-1/2" thick x 2-1/2" -24" design ensures positive
wide beam flange and safe connection
2108410 Fixed Beam Anchor, fits up to 1/2" to 2-1/2" thick x 12"- 36" • Complete with integral
wide beam flange D-ring tie-off point
• Durable, corrosion resistant
zinc plated steel construction
2105500
CONCRETE CONCRETE LEADING EDGE TRIPOD
ANCHORAGE CONNECTORS This anchor provides workers with a quick, easy and safe anchorage
point during pre-cast concrete work.
Extremely versatile anchors for concrete are lightweight and • For use with 3504500 Ultra-Lok™ Leading Edge SRL (see page 57)
compact, providing an easy-to-install and safe 5,000 lb. (22kN) • Swivels 360 degrees offering complete freedom of movement
tie-off point for your personal fall protection system. • Also use as end anchors for a temporary horizontal lifeline
• Built-in ratchet securing system – no special tools required
2100085
SAFLOK™ CONCRETE WEDGE ANCHOR
Portable and reusable concrete anchor installs quickly
and easily using standard concrete tools, providing a
fast and safe tie-off point.
• Exclusive quick-release button for fast removal
• Unique forged connection ring provides a
compatible tie-off point
• Shielded load cable and chock release cables
• Exclusive pivoting easy-grip handle 2104560
CONCRETE D-RING ANCHOR
A simple, versatile and safe concrete anchor
solution for use in temporary or permanent
applications provides a safe tie-off point.
2100101 • Reusable D-ring assembly
SAFLOK ™ TOGGLE ANCHOR • Rugged design for harsh environments
Portable and reusable anchor installs in just seconds to
• Safe “hook-up” indicator notifies user
concrete or steel for horizontal, vertical, or overhead of proper installation
applications, providing a compatible, fast and safe
• Install into 11/16", 18mm or 3⁄4" holes –
tie-off point. only standard drill bits needed
• Activator cable provides toggle mode selection
(Open or Lock)
• Toggle position indicator visually notifies user 2104561 Concrete D-ring Anchor with 5 additional bolts
if locked or unlocked
2104562 Concrete D-ring Anchor with 11 additional bolts
• Swiveling D-ring provides a compatible
tie-off point 2100066 10-pack of replacement bolts for concrete D-ring anchor
2101004
CONCRETE DETENT ANCHOR
A versatile, simple and safe concrete anchor
2100050 utilizing pre-installed sockets enables the
CONCRETE ANCHOR STRAP user to connect and disconnect from the
Our disposable concrete anchor strap provides
a temporary anchorage on concrete forms and is
anchorage by simply pressing a button. 1231305
• Use for floor, wall or ceiling SAFLOK MAX ™ WEB ANCHOR
extremely easy to install and use. type applications Anchor can be directly connected to many concrete wall forms
• Loop slips over rebar, then concrete is poured over
• When no longer needed, simply cut strap and discard
• Provides convenient tie-off points
wherever needed
8523178 to provide a tie-off point for your system. Web anchor strap
with large opening, Saflok Max™ hook at one end,
• Durable 1-3/4" polyester construction x 3-1/2 ft. (1m) CONCRETE PARAPET ANCHOR
• Push-button operation for fast and D-ring at other x 1.5 ft. (45cm).
• Full length wear pad for abrasion resistance easy operation Portable anchorage connector developed for use in locations where a
• D-ring provides compatible tie-off point low parapet wall provides an anchor site for a shock absorbing lanyard
• Socket includes cover cap to hide
recess, blending into the decor or self retracting lifeline.
2100053 Concrete anchor strap with D-ring, 48" (1.2m)
• Non-penetrating design eliminates site damage
2100061 Concrete anchor strap, no D-ring, 3-1/2 ft. (1m) 2101000 Concrete detent socket and cap only • Adjustment range 1" to 14.5" wide
2101002 Concrete detent pin only • No tools required for installation
2103673
PORTABLE REUSABLE 2103675
ROOF ANCHOR PORTABLE/REUSABLE
For use on flat or sloped wood roofs. Installs STANDING SEAM
with twelve 16D nails or six 1/4" x 2-1/2" ROOF ANCHOR
bolts. Can be used with horizontal Attaches to sloped or flat structural
lifeline systems for added versatility. standing seam roofs. Telescoping
adjustment fits 24", 30", 32" and 36" seam spacing. Swivels 360 degrees and
2103676 designed for use with Ultra-Lok™ Leading Edge SRL (order SRL separately).
PORTABLE REUSABLE ROOF ANCHOR
For use on flat or sloped wood roofs. Installs with 20 ea.
16D nails. Simple hinge style design is extremely easy to 7255000
transport, install, dismantle and store. FREESTANDING
COUNTERWEIGHT ANCHOR
2103677 Freestanding system is easily
When you’re out on the wood or steel roof of a residential or commercial structure, whether flat PORTABLE REUSABLE ROOF ANCHOR placed on top of the roof surface
ROOF or sloped, your fall protection system needs specialized components to keep you safe without
causing damage to the structure. Our easy-to-use kits and anchorage devices provide the
For use on flat or sloped wood roofs. Installs with three
grade 5, 5/16" x 3" min. lag screws. Compact
to provide a tie-off point for one
worker. Complete with 16 ea. 45 lb.
ANCHORAGE CONNECTORS perfect solution and meet the latest OSHA and ANSI standards.
design is extremely easy to transport, install,
dismantle and store.
(20kg) counterweights and installs
without penetrating the roof sheathing.
2104541 7200439 45 lb. (20kg) Single Replacement Counterweight

2103690 DETACHABLE ROOF ANCHOR WITH FLASHING
3-MAN REUSABLE SWIVELING Removable D-ring assembly allows you to leave
ROOF ANCHOR behind the clamp assembly and then shingle
Provides 360 degrees of mobility and protection
for up to three workers on sloped wood roofs.
over it, reusing the D-ring at another location. 2100075
2104168
Fits 2x6 to 2x8 roof truss, joist or rafter. ROOF TOP ANCHOR FOR
For ultimate mobility, use with 30 ft. 3504430 or METAL, CONCRETE AND WOOD
ROOFER’S FALL PROTECTION KIT 50 ft. 3504450 Ultra-Lok™ SRL (order separately). 2104540 Detachable Roof Anchor, fits 2x4
Permanent anchor for 24 gauge or
Complete fall protection system in a bag for 2104542 Detachable Roof Anchor, fits 2x10 thicker corrugated metal decking with ribs
convenient compliance and safety on the job. to 2x12
10" to 20" apart, 5/8" CDX plywood or concrete.
Kit includes:
Set-up for one or two users and incorporates load distributing design.
• Reusable Roof Anchor (2103673)
• Full Body Harness (1103513) 2103670
• Rope Adjuster with Shock PERMANENT ROOF
Absorbing Lanyard (1224005) ANCHOR WITH 2100076
• Lifeline x 50 ft. (1202794) FLASHING AND CAP ROOF TOP ANCHOR FOR MEMBRANE
• Counterweight (5901583)
2105683 Clamps onto roof truss up to 2" x 8" AND BUILT-UP TYPES
• Carrying Bag (9511597) REUSABLE SWIVELING size and comes complete with flashing Fastens through (up to 5.5") the membrane,
ROOF ANCHOR to prevent leakage and D-ring cap insulation and into the metal sheathing, wood
2104169 Roofer’s Fall Protection Kit with 2103676 Roof Anchor Provides 360 degrees of mobility for aesthetics. Provides fall protection sheathing or concrete. The base is covered
and protection on sloped or flat during initial construction as well with the roofing material and weather sealed
wood and metal decking. For use with as for future homeowner. together. Incorporates load distributing design.
30 ft. 3504430 or 50 ft. 3504450 Ultra-Lok™ SRL (order separately).
7611904 Also can be used as end-anchors for horizontal lifeline system.
2103671 Permanent Roof Anchor with Flashing and Cap, fits 2x10 to 2x12 2100077 Roof Top Anchor for Membrane and Built-Up Roofs with 10.5"
ROOFER’S FALL PROTECTION KIT bolt kit
Complete fall protection system in a bag for
convenient compliance and safety on the job. 3505694
Kit includes: REUSABLE SWIVELING
• Two Reusable Roof Anchors (2103673)
• Full Body Harness (1103513)
ROOF ANCHOR
Provides 360 degrees of mobility and
evolution™ HORIZONTAL LIFELINE SYSTEMS
• 50 ft. Sayfline™ Horizontal protection on sloped wood roofs. Includes These permanently installed systems are custom engineered
Lifeline System (7600511) 30 ft. 3504430 Ultra-Lok™ SRL. for your jobsite. Ideal for roof areas that must be accessed on
• Rope Adjuster with Shock
Absorbing Lanyard (1224005) 3505695 Reusable swiveling roof a regular basis, the system provides complete freedom
anchor with 50 ft. of movement, hands free mobility and fall protection for
• Lifeline x 50 ft. (1202794)
3504450 Ultra-Lok™ SRL
• Counterweight (5901583) multiple workers. Whether your need is for a straight, curved
• Carrying Bag (9511597) or combination system, we can custom design the perfect
7600511 Roofer’s Fall Protection Kit with 50 ft. Sayfline™ system, solution for your commercial roof application – call us today!
two reusable roof anchors and bag
98 D B I - S A L A™ W W W. C A P I TA L S A F E T Y. C O M 800.328.6146 99
FIRST-MAN-UP™
REMOTE
SPECIALTY ANCHORING
SYSTEM
These specialty anchors combine ease-of-use and strength to provide
fall protection safety to match the task. They all have been rigorously
SAFLOK™ POLE ANCHOR SYSTEM
tested to meet or exceed industry standards. 2104801
™
MOBI-LOK SELF CONTAINED VACUUM ANCHOR SYSTEMS Provides pole climber with 100% fall protection, allowing installation of
Provides a tie-off point on virtually any smooth, non-porous surface simply anchor and lifeline to top of pole from the ground. Quickly and safely climb
by flipping a switch and waiting for the green light. prior to connecting work positioning system.
• Fall arrest tested and approved, meeting OSHA, CE and AS/NZS • Compatible with most hot stick poles
• Lightweight design (under 20 lbs.) for easy transport • Includes anchor tube with
• Fail-safe back-up systems with audio alarms and vacuum level indicator
• Rubber seals secure anchor without damaging surface
installation/removal tool 2104527
• 80 ft. (24m) 5/8" (16mm) dielectric
• Can be used with horizontal lifeline systems for rope and two carabiners Provides a safe means to anchor a fall protection device to an
added mobility for two workers overhead location beyond normal reach.
• Rope grab with shock
absorbing lanyard • Pole adjusts from 6 to 12 ft. (1.8 to 3.6m)
2200095 • Chain tensioner, web loop • Tie-off adapter tool for installation of anchorage device
MOBI-LOK ™ FOR GENERAL INDUSTRY and carrying bag • Hook attachment tool for installation of 3,600 lb. gated snap hooks
Self-contained vacuum anchor assembly with bottle attachment and • Tie-off adapter x 3 ft. (0.9m) and carrying bag
carrying case. It is powered up with a single, on-board 48-cubic-inch
compressed gas bottle (order separately) or a large capacity detached
2104528 First-Man-Up™ System with 8-16 ft. (2.4-4.8m) adjustable pole
bottle, or shop air. Unit can also power one additional secondary pad. 2104800 ™
Saflok pole anchor system with anchor tube, installation/ 2104529 Snap hook connector tool for 3,600 lb. gated hooks
removal tool, 80 ft. (24m) 5/8" (16mm) dielectric rope, 2104530
First-Man-Up™ System, 6-12 ft. (1.8-3.6m) adjustable pole
2200094 Mobi-Lok™ general industry self contained vacuum carabiner, rope grab with shock absorbing lanyard and with original and 3,600 lb. gated hook tools
anchor without bottle attachment 2200094 carrying bag.
2104531 First-Man-Up™ System, 8-16 ft. (2.4-4.8m) adjustable pole
2200096 Mobi-Lok™ general industry self contained vacuum anchor secondary pad with original and 3,600 lb. gated hook tools
2200108
MOBI-LOK ™ FOR AVIATION INDUSTRY
Self-contained vacuum anchor assembly with bottle attachment and carrying case.
It is powered up with a single, on-board 48-cubic-inch compressed gas bottle
(order separately) or a large capacity detached bottle, or shop air. Unit can also
power one additional secondary pad.
• EPDM rubber seals are Skydrol resistant.
• Aviation rated electronics are intrinsically safe.
2200107 Mobi-Lok™ aviation industry self-contained
vacuum anchor without bottle attachment
2200109 Mobi-Lok™ aviation industry self-contained
vacuum anchor secondary pad
Mobi-Lok™ 4-man 100 ft. (30m) and 150 ft. (45m) systems also available
featuring twin horizontal lifeline systems. 2200108
MOBI-LOK™ ACCESSORIES
2100090
2200078 2 2200086 2 2200130 2200130 1225013 225013 2200400 20 PERIMETER LIMITER LEADING EDGE ANCHOR 2100080
Compressed Fill station, fills Secondary pad hose x 50 ft. FORCE2™ shock absorbing Sayfline™ horizontal lifeline system x 40 ft. Freestanding, non-penetrating anchor is ideal for concrete decking DOOR/WINDOW JAMB ANCHOR
gas cylinder compressed gas (15m). For connecting lanyard with web loop choker (12m). For connection between two or more construction and provides overhead anchorages for up to 2 users. Non-penetrating anchor is lightweight and portable, requiring no tools for
cylinder 2200078 from secondary pads to self- at one end, aluminum pads to create continuous protection for attachment. Adjustable opening ranging from 21.5" to 51.5" (54.6cm to
• Large foam filled trailer tires won’t go flat and will provide easy movement
bulk nitrogen cylinder. contained vacuum anchor. carabiner at other x 6 ft. (1.8m). two workers. 130.8cm). Rated for 3,600 lbs. (16kN).
• Rotating 7.5 ft (2.3m) mast and anchorage arm for added freedom of movement
• Pre-drilled holes for accessory rescue winches or jobsite boxes
• Additional weights and taller mast can be added for jobsite flexibility
2100091 9-1/2 ft. mast for perimeter limiter
100 101
CUSTOM ACCESS SOLUTIONS
PROBLEMS DBI-SALA™ has created a proven process for

developing unique solutions. Whether it’s an
ARE JUST existing or modified product, or an entirely

new design, DBI-SALA™ always meets the
SOLUTIONS requirements of your specific application.
Each custom solution is driven by our customers’ needs and is
WITHOUT dependent on the industry, environment and specific design

constraints, including government standards. Give DBI-SALA™ a call
PART today. We may already have an existing system that will meet your
needs. If not, our experts will walk you through a simple 3-step
process to assure you receive the right product for your application.
NUMBERS. STEP 1: DESIGN

A custom access concept rendering is created,
based upon your specific application.
STEP 2: ENGINEERING
Engineers structurally analyze and produce
drawings to exact specifications for your approval.
STEP 3: FABRICATION
Expert welders and fabricators bring your project to life.
And we deliver your custom access solution.
Contact DBI-SALA™ today. We’ll demonstrate just how effective it can be to partner with an
organization that truly understands your need for safe and reliable custom access solutions.
102 103
FLEXIGUARD™
FLEXIGUARD™ BOXED-FRAME RAIL FAS
A-FRAME RAIL FAS The FlexiGuard™ Boxed-Frame Rail Fall Arrest System
(FAS) provides a convenient means of securing a rigid
rail in areas with limited space or inadequate overhead
The FlexiGuard™ A-Frame Rail Fall Arrest System (FAS)
structure. These frames can be custom built to
provides a secure anchor point, in a portable structure, for
accommodate a specific area or piece of equipment.
increased worker mobility and protection. Depending on the
Permanent mounted and portable systems are
configuration, this system has the capacity to provide fall
available depending on your application needs.
protection for up to 4 workers and can be easily moved from
jobsite to jobsite. It provides safe and reliable fall protection
where you need it, when you need it.
DURABLE DURABLE
• Powder coated T 6061 lightweight aircraft aluminum and steel • Powder coated T 6061 lightweight aircraft aluminum and steel
• Rigid gusseted support for extra tall and wide applications • Rigid gusseted support for extra tall and wide applications
• Wheels: Heavy-duty urethane or foam filled pneumatic (won’t go flat) • Wheels: Heavy-duty urethane or foam filled pneumatic (won’t go flat)
• Rail: Maintenance free extruded aluminum rail for free gliding trolleys • Rail: Maintenance free extruded aluminum rail for free gliding trolleys
C U S TO M AC C E S S S O L U T I O N S
L
PORTABLE PORTABLE
• Lightweight design – easily moved by two people • Lightweight design – easily moved by two people
• Indoor and outdoor use VIEW WHEN RAISED • Ability to reposition with forklift or overhead crane
• Heavy-duty stabilization jacks • Heavy-duty stabilization jacks
• Visual level indicators (vertical uprights) H
• Visual level indicators (vertical uprights)
W VERSATILE
FLEXIBLE
• Dual enclosed fall arrest rails allow for bypass of workers • Indoor and outdoor use
• Fixed height or adjustable height systems available • Portable or fixed solutions available
• Capacity for up to 4 workers depending on configuration • Multiple overhead anchor points
H • Systems can be combined to cover larger work area
• Wide user footprint with overhead rails 34' (10.36 m) wide
VIEW WHEN LOWERED • Rail runs parallel to a load, giving a larger area of coverage
• High clearance for tall work surfaces, 30' (9.14 m) anchor height
• Mobile anchor point can be relocated • Minimal fall clearance required with SRL and rigid rail design
CUSTOM CUSTOM
STANDARD SYSTEM DIMENSIONS • Custom designs available to meet your specific requirements STANDARD SYSTEM DIMENSIONS • Custom designs available to meet your specifications
W Maximum Width up to 34 ft. (10.36m) • Specialized installation, supervision and training are available W Maximum Width up to 24 ft. (7.32m) • Specialized installation, supervision, and training are available with every solution
H Maximum Height up to 30 ft. (9.14m) with every solution
H Maximum Height up to 25 ft. (7.62m) • Call DBI-SALA™ for custom product details
up to 19 ft. (5.8m) • Call DBI-SALA™ for custom product details L Maximum Length up to 60 ft. (18.29m)
L Maximum Length
Maximum Number Of Users 4 Maximum Number Of Users 4
Measurements above are for standard systems – custom systems also available. Measurements above are for standard systems – custom systems also available.

FLEXIGUARD™
FLEXIGUARD™ COUNTERWEIGHT RAIL FAS
C-FRAME RAIL FAS The FlexiGuard™ Counterweight Rail Fall Arrest System (FAS)
is designed to use a FlexiGuard™ or customer-specified
counterweight to extend an anchor point over a work surface.
The FlexiGuard™ C-Frame Rail Fall Arrest System (FAS) is
As a result, the system can be positioned close to equipment
a versatile solution for working at heights. It’s designed to
or structure without obstructing access.
be moved manually or with use of a tow bar and service
vehicle. The C-Frame Rail FAS will require some clearance
under the equipment being accessed, to accommodate
for outrigger supporting legs.
DURABLE DURABLE
• Powder coated T 6061 lightweight aircraft aluminum and steel • Powder coated T 6061 lightweight aircraft aluminum and steel
• Rigid gusseted support for extra tall and wide applications • Rigid gusseted support for extra tall and wide applications
• Wheels: Heavy-duty urethane or foam filled pneumatic (won’t go flat) • Wheels: Heavy-duty urethane or foam filled pneumatic (won’t go flat)
• Rail: Maintenance free extruded aluminum rail for free gliding trolleys • Rail: Maintenance free extruded aluminum rail for free gliding trolleys
H + 12" PORTABLE PORTABLE
W + 32'
H • Lightweight design – easily moved by two people • Ability to reposition with forklift
• Tow bar option allows for repositioning by forklift or other service vehicle • Trailer mounted designs for easy mobility
• Heavy-duty stabilization jacks
• Visual level indicators W + 3' 8" VERSATILE
H • Indoor and outdoor use
H + 7" • Portable or fixed solutions available
W L VERSATILE
W + 10" L + 30"
• Indoor and outdoor use • Multiple overhead anchor points
• Portable or fixed solutions available • Leveling pads for uneven surfaces
Typical Dimensions (Height x Length x Width) • Adjustable or fixed height designs available W
• Rail runs parallel to a load, giving a larger area of coverage
L
• Standard rail widths of 10' (3.05m), 15' (4.57 m), and 20' (6.10m) • Multiple overhead anchor points • Does not require engineered piles or costly foundation installation
Custom widths are also available Typical Dimensions (Height x Length x Width)
• Rail runs parallel to a load, providing a large working area • Standard counterweights available
• Height adjustable options from 12' (3.66 m) to 18' (5.49 m), 16' (4.88m) • Unit base sizes dependent on length and width of rails. Bases can be as
• Numerous wheel options available for varying work surfaces small as 6' (1.83m) by 6' (1.83m) to as large as 24' (7.32m) by 8' (2.44m).
• Additional length can be added by joining multiple systems
to 26' (7.93m) and 20' (6.10m) to 34' (10.36m)
• Minimal fall clearance required with SRL and rigid rail design • Custom trailer mounted systems can be as long as 52' (15.85m).
• Fixed Height anchorage options up to 28' (8.53m) also available CUSTOM
CUSTOM • Customer specified counterweight options
STANDARD SYSTEM DIMENSIONS STANDARD SYSTEM DIMENSIONS
• Custom designs available to meet your specifications • Custom designs available to meet your specifications
W Maximum Width up to 20 ft. (6.1m) • Specialized installation, supervision and training are available with W Maximum Width up to 52 ft. (15.85m) • Specialized installation, supervision and training are available
H Maximum Height up to 34 ft. (10.36m) every solution H Maximum Height up to 25 ft. (7.62m) with every solution
L Maximum Length up to 18 ft. (5.49m) • Call DBI-SALA™ for custom product details L Maximum Length up to 40 ft. (12.19m) • Call DBI-SALA™ for custom product details
Maximum Number Of Users 2 Maximum Number Of Users 2
Measurements above are for standard systems – custom systems also available. Measurements above are for standard systems – custom systems also available.

FLEXIGUARD™
FLEXIGUARD™ LADDER FAS
CUSTOM RAIL FAS The FlexiGuard™ Ladder Fall Arrest System (FAS) combines
easy access to elevated work areas, with 100% fall protection.
The FlexiGuard Custom Rail Fall Arrest System (FAS) is a rigid
™ Operators are protected from the ground up, for the duration
system that eliminates sag and deflection. It’s an ideal solution of the work being performed. System configurations may
for applications with minimal fall clearances and reduces include, but are not limited to, guardrails, SRLs, or
the chance of multiple chain reaction falls sometimes confined space equipment.
associated with flexible cable horizontal
lifeline systems. The Custom Rail FAS
provides a large working area
for multiple operators, while
minimizing costs.
DURABLE
• Powder coated T 6061 lightweight aircraft aluminum and steel
• Foam protected non-slip platform
• Wheels: Heavy-duty urethane or foam filled pneumatic (won’t go flat)
• 100% fall arrest rated tie-off from the ground up
DURABLE
• Maintenance free shielded rail design PORTABLE
• Weather resistant anodized extruded aluminum • Quick assembly and positioning allows for utilization across facility
• Built-in trolley glides effortlessly along rail for smooth operation • Towable design for easy mobility
• Lightweight design is easy to move by hand
VERSATILE H
• Heavy-duty stabilization jacks
• Junction box allows for directional change at any angle with multiple rails
NUMBER OF USERS / WORKING LOAD • Unlimited length of continuous rail with sufficient support VERSATILE
• Can be mounted to wall, ceiling or various other overhead structures • Indoor and outdoor use
1 USER 2 USERS 3 USERS
Span 1800 lbs 3,600 lbs 5,400 lbs 4 USERS • Trolleys can work with carabiners or snap hooks • Portable or fixed solutions available
(816kg) (81,633kg) (2,449kg) • Rail can be mounted in any direction • Multiple overhead anchor points based on design
• Rated for multiple users • Collapsible design for storage or transportation
W L
8 ft. • For outdoor or indoor use • Adjustable handrails
2.44m Free-standing system Tanker system which requires
Call • Several standard height options available
DBI-SALA ™ • Minimal training required supporting work surface for fall
for details arrest loads
• Rigid rail has no deflection or sag, reducing fall clearance requirements
16 ft. CUSTOM
4.88m
CUSTOM STANDARD SYSTEM DIMENSIONS • Various guardrail configurations available
• Custom designs available to meet your specifications • Custom designs available to meet your specifications
Note: W Maximum Width up to 20 ft. (6.10m)
24 ft. • Specialized installation, supervision and training are available • Specialized installation, supervision and training are available
7.32m • Anchor points must be capable of supporting H Maximum Height up to 39 ft. (11.90m) with every solution
with every solution
working load times safety factor L Maximum Length up to 18 ft. (5.49m)
• Call DBI-SALA for custom product details
™ • Call DBI-SALA™ for custom product details
• Shock absorber and/or SRL required Maximum Number Of Users 2
32 ft. • Safety Factor: 2:1 Minimum
9.76m Measurements above are for standard systems – custom systems also available.
• Consult the manufacturer for more details

CONFINED SPACE RESCUE
When it comes to confined space entry/rescue, it
is essential that equipment operates perfectly and
IF YOU HAVE quickly. DBI-SALA™ has an extensive line of rescue and

retrieval systems with decades of proven field service.
THE GUTS TO Safety engineers and site directors trust DBI-SALA™ for the type of high
quality, rugged systems that will ensure top performance when it is needed
the most. Our systems meet applicable industry standards. We also
GO IN, WE’LL customize solutions to suit customer needs. Call DBI-SALA™ today.
WHAT TO LOOK FOR IN A CONFINED SPACE

RESCUE SYSTEM:
GET YOU OUT. EASE-OF-USE

Your systems must provide you with the ability to handle a
crisis simply, flawlessly and immediately. During an
emergency, time is of the essence.
MECHANICAL SYSTEMS
Lifeline type and length are just a few of the options
your system may need. In some situations, a back-up
system may be required.
DURABILITY
All system components must be made from
quality materials strong enough to endure
rough handling and exposure to the elements.
VERSATILITY
Your system should be adjustable and adaptable
to extreme environments and uneven terrain.
A modular design is also helpful, allowing you
to add to the system over time.
STRENGTH
Your system must be rated for your
application, such as fall arrest, rescue,
man-riding or material handling. Choose one
that maximizes strength and minimizes weight.
PORTABILITY
Your system should be lightweight, easy to
transport, set-up and store. Remember in an
emergency situation, every second counts.
110 111
CONFINED SPACE RESCUE • BUILT-IN
PULLEYS
Route lifelines of two 23-1/2" to
mechanical devices 42-1/2"
ADVANCED ONE-PIECE ADJUSTABLE OFFSET DAVIT MASTS
(59.7cm to
VARIABLE OFFSET MAST • for smooth, efficient 108cm)
Adjustable length of davit ensures operation.

ADVANCED DAVIT ARM lifelines are always centered over 66" to 76" 78" to 88" 90" to 100" 69.5" to 87.5" 81.5" to 91.5" 93.5" to 111.5"
confined space. ADJUSTABLE OFFSET
SYSTEM COMPONENTS (167.6cm to (198.1cm to (228.6cm to (176.5cm (207cm to (237.5cm to
• FALL ARREST DAVIT MAST
193cm) 223.5cm) 254cm) to 222.2cm) 232.4cm) 282.2cm)
ANCHORAGE
Up to a 5,000 lb. 69.5" to 87.5"
11-1/2" to 27-1/2"
(176.5cm to
Variable offset davits are designed (22kN) rated 222.2cm) 8518382 8518383 8518384
anchor point for (29.2cm to 69.8cm)
for use where multiple offset masts
fall arrest device. 23-1/2" to 42-1/2"
are required. The variable offset 8518385 8518386 8518387
(59.7cm to 108cm)
masts may be equipped with front
mounted and/or back mounted
winches or SRLs and feature an
anchor point rated up to 5,000 lbs. 8518385
(22kN) depending on pin
position. For applications ADVANCED TWO OR THREE-PIECE ADJUSTABLE OFFSET DAVIT MASTS & LOWER MAST EXTENSIONS
with overhead clearance
Customize either one of these davit masts with up to (2) lower mast extensions. The extensions provide the flexibility to change the overall
restrictions, the adjustable mast height of your system. Custom lengths are also available. Call for details.
height of the variable offset

masts can eliminate the need for
custom length masts and mast 8518001
extensions. Quick connect/release 11-1/2" TO 27-1/2" ADJUSTABLE
OFFSET DAVIT MAST
pins allow for fast and easy set-up, (INCLUDES WINCH MOUNT BRACKET)
dismantle and transport. 33.0" to 43.0" Combine this one-piece davit mast
(838cm to 1092cm)
with any two (2) lower mast extensions
11-1/2" to
to increase the anchorage height.
WINCH • 27-1/2" (29.2cm
to 69.8cm)
Davits can be equipped with both primary
and secondary (back-up) mechanical • ADJUSTABLE HEIGHT
devices for added flexibility. Eliminates the need for custom length
masts and extensions.
21.0" 33.0" 45.0" 57.0"
(53.3cm) (83.8cm) (114.3cm) (144.8cm)
8518006
QUICK-MOUNTING BRACKETS • 23-1/2" TO 42-1/2" ADJUSTABLE
C O N F I N E D S PAC E R E S C U E
Simple detent style winch mounting OFFSET DAVIT MAST
brackets make installation fast and ( INCLUDES WINCH MOUNT BRACKET ) 8518509 8518002 8518003 8518004
efficient. (See page 134 for options.) 36.5" to 54.5" Combine this one-piece davit
(927cm) to 1384cm)
mast with any two (2) lower mast
8518509 21" (53.3cm) Advanced lower mast extension
extensions to increase the 8518002 33" (83.8cm) Advanced lower mast extension
anchorage height.
• LOWER MAST EXTENSIONS 23-1/2" to 42-1/2"
8518003 45" (114.3cm) Advanced lower mast extension
3-WAY SRL • Allow the user to increase the overall (59.7cm to 108cm)
Davits can be equipped with both primary anchorage height of the system. 8518004 57" (144.8cm) Advanced lower mast extension
and secondary (back-up) mechanical
devices for added flexibility.
ADVANCED BAGS AND ACCESSORIES
8513330
CARRYING BAG
Bag with protective plastic liner for advanced adjustable offset davit masts.
• BASE OPTIONS
Several portable and fixed base options
are available for complete versatility.
8513564 Bag with protective plastic liner for advanced adjustable offset
davit mast, with lower mast extension.

8518000
ADVANCED 5-PIECE HOIST SYSTEM
Davit arm and base system includes 11-1/2" to 27-1/2" (29.2cm to 69.8cm)
adjustable offset upper mast (8518001), 33" (83.8cm) lightweight lower mast
(8518002) and 3-piece lightweight base (8518005). Includes winch mounting
bracket. Order winch and SRL separately.
Weight: 100 lbs. (45.5kg)
ADVANCED BAGS AND ACCESSORIES
70.5" to 83.0"
(179.1cm to
8518270
11-1/2"
to
210.8cm) ADVANCED 5-PIECE
27-1/2" EQUIPMENT CART
(29.2cm to
69.8cm) Transport the advanced 5-piece
system with maximum ease over
smooth or rough terrain. Ideal for
tight storage situations.
8518513 Set of 2 carrying bags

for 8518000 Advanced
5-Piece Hoist System
50"
(127cm)
37" to 64"
(94cm to 162.5cm)
8518040
ADVANCED 5-PIECE HOIST SYSTEM
Davit arm and base system includes 23-1/2" to 42-1/2" (59.7cm
to 108cm) adjustable offset upper mast (8518006), 33" (83.8cm)
lightweight lower mast (8518002) and 3-piece lightweight base
(8518008). Includes winch mounting bracket. Order winch separately.
Weight: 137.5 lbs. (62.3kg)
23-1/2" to 42-1/2" (59.7cm
to 108cm)
74.0" to 94.5"
(188cm to 240cm)
ADVANCED HOIST SYSTEMS

The Advanced Series Hoist Systems are designed for manhole and confined space entry/retrieval applications.
These units are constructed of lightweight materials including high-strength aluminum. The davit pivots for
ease-of-rescue and has adjustment for overhead clearance restrictions. The lower base adjusts to fit most
standard entries. Many other portable and fixed bases are available to suit any jobsite need. If additional 68.5"
(174cm)
70" to 97" (177.8cm to
height is required, check out our lower mast extensions. If you don’t see what you need, please call for your 246.4cm)
customized solution.

ADVANCED MANHOLE COLLARS
ADVANCED PORTABLE BASES 8510501 17.5" (44.5cm) Manhole Collar, fits 18"-20" (45.7cm-50.8cm) diameter. Provides a portable davit base
by simply fitting within manhole opening. Powder coated aluminum construction with PVC sleeve liner.
8510520 19.5" (49.5cm) Manhole Collar fits 20" - 22" (50.8cm - 55.8cm) diameter
Advanced Portable Bases work with a variety of Advanced Davit Arm 8510457 21.5" (54.6cm) Manhole Collar fits 22" - 24" (55.8cm - 60.9cm) diameter
and Mast Extensions. Portable bases are ideal when you need to 8510163 23.5" (59.7cm) Manhole Collar fits 24" - 26" (60.9cm - 66cm) diameter
move and access various confined space areas. These bases 8510633 25.5" (64.7cm) Manhole Collar fits 26" - 28" (66cm - 71.1cm) diameter
are lightweight, easy to transport, set-up and use. 8510632 27.5" (69.8cm) Manhole Collar fits 28" - 30" (71.1cm - 76.2cm) diameter
8510546 29.5" (74.9cm) Manhole Collar fits 30" - 32" (76.2cm - 81.2cm) diameter
36" (91.4cm)
8518005
ADVANCED 3-PIECE PORTABLE BASE 8512994 33.5" (83.1cm) Manhole Collar fits 34" - 36" (86.3cm - 91.4cm) diameter
Adjustable base for 27-1/2" (69.8cm) maximum offset davit mast.
50" 8518008 ADVANCED 3-PIECE PORTABLE BASE

(127cm) 37" to 64"
Adjustable base for 42-1/2" (108cm) maximum offset davit mast.
(94cm to 162.6cm)
8513565 CARRYING BAG 41" (102.5cm)

ADVANCED VEHICLE
Bag with protective plastic liner for 8518005 3-piece davit base. HITCH MOUNT SLEEVE
Designed to install into a 2" (51mm) hitch receiver on an attendant
11.7"
8519377 8510323 vehicle to provide a portable anchor point for confined space entry,
(29.7cm) EXTERNAL TANK COVER BARREL MOUNT SLEEVE rescue and fall arrest systems.
Comes with Adjustable Sleeve Assembly (8511232). WITH 3.5" (89MM)
Used on manways with a flange structure that the unit OPENING
may be secured onto. This collar can clamp onto 6" Mild steel construction. 8510140
(15.2cm) max thick flange. Eight independent clamping 11.2" VEHICLE HITCH MOUNT SLEEVE
(28.5cm)
screws allow temporary Assembly for a maximum 27.5" (69.8cm) offset davit mast.
18" - 56" Weight: 82 lbs. (37.2kg) 36"
(45.7cm to 142.2cm) 30.0" installations over edges of (91.4cm)
(76.2cm)
shoring cans, walls and other structures. Comes
with PVC inner liner. Custom fit openings available. 8514461
VEHICLE HITCH MOUNT SLEEVE
8519378 8510429 Barrel Mount Sleeve with 3" (76.2mm)
Assembly for a maximum 42-1/2" (108cm) offset davit mast.
11.7"
(29.7cm) Opening - Stainless Steel
INTERNAL TANK COVER
Comes with Adjustable Sleeve Assembly (8511232). 41" 51.75"
(104.1cm)
(131.4cm)
Mounted to the inside of a manway. This collar 9" (22.8cm)
10"
1.5"
may be used with sleeve assemblies and masts (28.5cm)
(38.1cm)
or for vertical entries.
18.0" - 36" (45.7cm
to 91.4cm) Weight: 61 lbs. (27.7kg) ADVANCED VEHICLE HITCH SLEEVE EXTENSIONS ADVANCED BUMPER
24.5" ATTACHMENT OPTIONS
(62.2cm) 10.8" 0-24" A maximum of one extension can be used with a hitch mount and a bumper attachment.
(27.4cm) (0-60.9cm)
8512285 8511401
84" (213.9cm)
8510568 ADJUSTABLE BARREL MOUNT SLEEVE
UNIVERSAL JOINT ASSEMBLY
Installs between the 8510140 Hitch Mount Sleeve or
FORKLIFT BASKET Designed for shoring, wall and parapet
extension and the vehicle to compensate for uneven
Designed to convert your forklift into a versatile applications. Standard unit accommodates
ground conditions.
confined space and fall arrest work platform. wall thicknesses up to a maximum of 24"
42"
(106.7cm)
Add a davit mast and winch/SRL to the basket (60.9cm), with shorter or longer adjustment Weight: 10 lbs. (4.5kg)
and you’re ready to go. Lightweight aluminum tubes available on request. Anodized, welded
construction and tool-less assembly makes aluminum with zinc plated steel hardware with 8514503 2' (0.61m) Vehicle Hitch Mount Sleeve Extension Weight: 17 lbs. (7.7kg)
set-up, transport and storage convenient. inner sleeve. 8520886
Durable powder coated finish with anti-slip 8512829 4' (1.21m) Vehicle Hitch Mount Sleeve Extension Weight: 27.8 lbs. (12.6kg)
UNIVERSAL HITCH BALL COUPLER
finish on walking surfaces. Includes 8510715 Adjustable barrel mount sleeve 8511384 6' (1.83m) Vehicle Hitch Mount Sleeve Extension Weight: 39 lbs. (17.6kg) Designed to secure to a ball hitch on a vehicle
spring-loaded gate. for 0"-12" opening (universal size).
50" 45" Weight: 215 lbs. (98kg)
(127cm) (115cm) Weight: 16 lbs. (7.6kg)

ADVANCED 8520775
COUNTERWEIGHT MOBILE COUNTERWEIGHTED CART BASE
Ideal for areas that require access near a leading edge or into large tanks.
System comes complete with counterweight cart, 36" (91.4cm) inner
SYSTEMS extension tube, center section, and 2 outrigger screw assemblies. System
counterweighted by 50 lb. (22.7kg) weight plates. (Weight plates, davit
mast and winch not included − order separately.)
The Advanced Counterweight System is composed
of a central base unit to accommodate a variety of
anchoring options, positioning and adjustment legs,
and extension assemblies. Anchoring options include 8530088
PORTABLE CATWALK CLAMPING BASE
a weight rack for counter balanced applications, and
Designed to secure to 36" (91.4cm) wide walkways. Ideal for areas that
a wheel pad assembly to allow counter balance of require access off a mezzanine or walkway. System comes complete
with catwalk hook, 16" (40.6cm) inner extension tube, center section,
the unit with an attendant vehicle.
and 2 outrigger screw assemblies. Other models available to accommodate
NOTE: Individual weight plates sold separately. different widths of walkways. (Davit mast and winch not included −
order separately.)
8512894 8530256
ADVANCED COUNTERWEIGHT SYSTEM PORTABLE ANCHOR POINT BASE
Counterweight System Base with Pole Leg Assembly. Ideal for areas that require access over a leading edge. System comes
complete with u-bolt anchor point to attach to secondary fixed anchor, 36"
Weight: 199 lbs. (90.2kg) (91.4cm) inner extension tube, center section, and 2 outrigger screw
assemblies. System requires a 5,000 lb. (22kN) anchorage point to be tied
down to. (Davit mast and winch not included − order separately).
8514496
ADVANCED COUNTERWEIGHT SYSTEM
Counterweight System Base with Screw Leg Assembly.
NOTE: Davit mast and winch not included −

order separately.
8511892
PORTABLE RAIL CLAMPING BASE
Ideal for rail accessed areas, including over the edge of a rail bridge.
System comes complete with a rail bridge clamp which anchors the
base, 36" (91.4cm) inner extension tube, center section, and 2
outrigger screw assemblies. (Davit mast and winch not
included − order separately.)

CONFINED SPACE RESCUE 4.25"
(10.7cm)
4"
9.5"
(10.1cm)
(24.1cm)
9.2"
(23.3cm)
8"
(20.3cm)
12.5" 10"
10" (25.4cm) (31.7cm) (25.4cm)
8516190 8512831 8518348

FLOOR MOUNT SLEEVE CENTER MOUNT SLEEVE WALL MOUNT SLEEVE 304 STAINLESS STEEL
Zinc plated mild steel construction. Mounts to Zinc plated mild steel construction. Mounts to 304 stainless steel construction. Compact design
horizontal concrete or steel structure. Comes existing steel and concrete structures by welding creates minimum intrusion into work space. Mounts
with PVC sleeve liner. or bolting. Comes with PVC sleeve liner. to vertical concrete or steel structures. Comes with
PVC sleeve liner.
Weight: 13 lbs. (5.9kg) Weight: 13 lbs. (5.9kg)
8518347 Floor Mount Sleeve 8516563 Center Mount Sleeve
Stainless steel construction Stainless steel construction 8516191 Wall Mount Sleeve
Zinc plated mild steel construction
8.06"
(20.4cm) 12" (30.4cm)
9.2"
(23.3cm) 8"
8.06"
(20.4cm) (20.3cm)
9.2" (23.3cm)
10"
0
(25. 4cm)
4" 4"
(10.1cm)
8510109 (10.1cm)
8515162 8510316
0316
CORE MOUNT SLEEVE DECK MOUNT SLEEVE FLOOR MOUNT SLEEVE
Zinc plated mild steel construction. Designed for Zinc plated mild steel construction. Designed to Mild steel construction. Recessed fastener pockets
slip-in installation into 4" (10.1cm) core hole in slip into a 4" (10.1cm) hole in existing flooring. allow for bolt-in installation into existing concrete
concrete or in an existing steel structure. Comes Flush mount design allows passage of traffic and or steel structure. Flush mount design allows
with PVC sleeve liner. eliminates trip hazards when not in use. Comes passage of traffic and eliminates trip hazards
with PVC sleeve liner, plastic stopper and mounting when not in use. Comes with PVC sleeve liner.
hardware – mounts to thicknesses from 1/4" to 2"
8510110 Core Mount Sleeve (6.4mm-50.8mm).
8512827
Stainless steel construction Weight: 17 lbs. (7.7kg) Flush Floor Mount Sleeve
Stainless steel construction
8515834 Deck Mount Sleeve
Stainless steel construction
12"
(30.4cm)
8"
(20.3cm) 9.2" (23.3cm)
ADVANCED FIXED BASES 8510311

FLUSH FLOOR MOUNT SLEEVE
8510827
HEAVY DUTY SLEEVE CAP
Mild steel construction. Comes with pins for fresh concrete and cast-in-place Stainless steel construction, used with permanent mounted sleeves when
Advanced Fixed Bases work with a variety of Advanced Davit Arm and Mast Extensions. Fixed bases are concrete anchors for new construction or renovation. Flush mount design installed in high traffic or other severe service locations.
allows passage of traffic and eliminates trip hazards when not in use. Comes
ideal for work areas where frequent set-up and tear-down is required and a base can be permanently Weight: 1.2 lbs. (0.54kg)
with PVC sleeve liner.
installed to an existing structure. 8510826 Heavy Duty Sleeve Cap Zinc plated mild steel construction
8512828 Flush Floor Mount Sleeve Stainless steel construction

8513158
ADVANCED UCT-300 7' (2.13m) TRIPOD
ADVANCED TRIPODS • Lightweight, durable aluminum construction
• TOP MOUNTED PULLEY SYSTEM with powder coat finish
Mount up to three pulleys to route mechanical device • Includes quick connect winch mount bracket –
Advanced Tripods are constructed lifelines for smooth operation. can accommodate up to three brackets
of lightweight tubular aluminum • Includes top mounted pulley system –
• SECONDARY ANCHOR POINT can accommodate up to three pulleys
with a rugged steel head assembly. 5,000 lb. (22kN) anchor point for secondary fall • Telescoping adjustable locking legs for
The UCT series tripods can be arrest system on 7 ft. models – 11,000 lb. (49kN)
combined with up to three pulleys
rating on 10 ft. models.
easy set-up
• Fast detent pin style adjustment and locking
8512292
WINCH/SRL MOUNTING BRACKET
to accommodate a variety of • ALUMINUM CONSTRUCTION • Inner plastic liners provide smooth adjustment
FOR 8513159 TRIPOD
winches and fall arrest devices to Extremely lightweight yet durable construction • Foot pads include sharp points for biting into
soft ground and/or uneven terrain Attaches to the leg tube with quick-release
for ease-of-use and longevity.
meet a wide range of confined • Safety chain for added support, strength pins for tool-less set-up and adjustment.
space entry/retrieval and rescue and safety Weight: 5.2 lbs. (2.4kg)
requirements. Quick release pins • 5,000 lb. (22kN) built-in head-mounted
anchor point
positively locate components at
all adjustment points for tool-less Winch and SRL not included – please order separately.
set-up and adjustment.
8000000
ADVANCED 7' (2.13m) ALUMINUM TRIPOD
• Lightweight, durable aluminum construction
• TELESCOPING LEGS • Includes quick connect winch mount bracket
Provide fast adjustment and
• Includes top mounted pulley system
cannot disengage, for added
worker satisfaction. • Telescoping adjustable locking legs for
easy set-up
8510224
• Fast detent pin style adjustment and locking WINCH/SRL MOUNTING BRACKET
• Rubber safety shoes with spiked edges for FOR 8513158 TRIPOD
• QUICK CONNECT BRACKET different terrains Attaches to the leg tube with quick-release
Allows fast and easy attachment
• ADJUSTABLE
HEIGHT LEGS • Safety chain for added support, strength pins for tool-less set-up and adjustment.
of mechanical devices.
Fast and easy detent pin and safety Weight: 3 lbs. (1.4kg)
MECHANICAL DEVICES • style adjustment allows for • 5,000 lb. (22kN) built-in head-mounted
Can support up to 3 winches precise height setting. anchor points NOTE: Also see accessories on page 134 for additional
or SRLs for complete flexibility. bracket options.
Winch not included – please order separately.
• SAFETY CHAIN
Provides added support and
strength for demanding confined 8000010 9 FT. (2.7M) ALUMINUM TRIPOD
space applications. With adjustable locking legs, safety
chains, top pulley and winch bracket.
INNER LEG LINERS • Winch not included – please order separately.
Allow for smooth positive connection
and operation of leg adjustment.
ADVANCED ACCESSORIES
8513159
ADVANCED UCT-1000 10' (3.05m) TRIPOD
With adjustable locking legs, safety chains,
top pulley and winch bracket.
8512293
Weight: 68 lbs. (30.8kg) FOOT PADS • TOP PULLEY ASSEMBLY FOR
Include sharp points for biting into 8513329 Carrying bag for 7' (2.1m) 8513158 tripod with protective plastic liner UCT SERIES TRIPODS
Note: Winch not included – please order separately. soft ground and/or uneven terrain. Pulleys are mounted on top of the head assembly to
8513330 Carrying bag for 10' (3m) 8513159 tripod with protective plastic liner
route mechanical device’s lifeline over and into
9503094 Carrying bag for 7' (2.1m) 8000000 tripod confined space area.
9503095 Carrying bag for 9' (2.7m) 8000010 tripod Weight: 1.6 lbs. (.73kg)

ADVANCED
CANTILEVER
RESCUE SYSTEM BASIC HOIST
ALUMINUM CONSTRUCTION •
Extremely lightweight yet durable construction for The Advanced Basic Hoist is the most efficient
The Cantilever Rescue System Kit
ease-of-use and longevity.
quickly and easily converts the and economical confined space entry/retrieval
8513159 10 ft. (3.05m) tripod into alternative to a tripod. This lightweight aluminum
QUICK MOUNT BRACKET •
a versatile piece of equipment for Allows fast and easy attachment structure assembles and adjusts without tools. The
high-angle rescue operations over of mechanical devices.
roof edges, parapets, guard rails, Advanced Basic Hoist features a collapsible base
cliffs, bridges or other situations. ADJUSTABLE • to reduce storage and transport space. A standard
Using the rigid wheel pad supplied HEIGHT LEGS tie-off point provides a convenient 5,000 lb. (22kN)
with the kit, the cantilever system Fast and easy detent pin
style adjustment allows for anchor point for fall arrest devices where required.
may be anchored with a service precise height setting.
vehicle’s weight, weight rack or All hardware is zinc plated for corrosion resistance.
with a single anchor point.
TELESCOPING LEGS • NOTE: First-time setup requires some tools and assembly.
Provide fast adjustment and

cannot disengage, for added
worker satisfaction.
88" to 91"
(223.5cm - 231.2cm)
8525001
ADVANCED BASIC HOIST WITH WINCH
2-piece davit mast and folding base assembly,
winch with 50 ft. (15m) galvanized cable lifeline
and mounting brackets.
• LEG SUPPORT SYSTEM 6" Min to
Provides tripod leg support to use in 20" Max
(15.2cm - 50.8cm)
• WHEEL PAD cantilever rescue configuration.
8517069
Provides easy means to anchor
system with service vehicles ADVANCED BASIC HOIST
weight or weight rack kit. 2-piece davit mast and folding base assembly with winch
mounting bracket. (Winch not included – order separately).
Weight: 58 lbs. (26.3kg) Hoist only

8530257
CANTILEVER RESCUE SYSTEM
Complete with 8513159 10 ft. (3.05m) tripod, 8515620 rigid wheel pad and attachment hardware, 8515631 weight rack kit, 8514540 leg support system and 8515150 top
mount pulley. Winch not included, must order separately.
8515150 8515631 63"

TOP MOUNT PULLEY FOR CANTILEVER WEIGHT RACK KIT (160.0cm)
CANTILEVER SYSTEM Use the weight rack in conjunction with

Allows system to handle two mechanical the 8512297 cantilever rescue system
devices (winch and SRL). if there is not sufficient space for the
attendant vehicle. Fifty pound weight 59.5"
Weight: 3.4 lbs. (1.5kg) (151.1cm) 17"
plates sold separately. (43.1cm)
48"
Weight: 36 lbs. (16.3kg) (122.0cm)

POLE HOIST TANK POD SYSTEM

SYSTEM 8513700
The Tank Pod is designed to mount to tank manways with existing hardware for
The Advanced Pole Hoist attaches
es with
securing hatch covers. It mounts to manway flanges on bolt circle diameters
a carabiner on the universal bracket
ket to
from 19" to 36" (48.2cm - 91.4cm), with studs from 1/2" to 3/4" (1.2.cm - 1.9cm)
a suitable anchor point, allowing you to
national coarse type. Three independently adjustable legs accommodate flange
work in any direction from any angle.
ngle. It
inclinations to a maximum of 45 degrees. The unit can be set up in an overhead
has a unique swivel head that rotates
tates
clearance of only 25" (63.5cm). It can be fitted with a variety of winches, ladder
360 degrees, providing flexibility
y in both
systems and fall arrest devices to meet application requirements.
vertical and horizontal confined space
Note: Winch not included – please order separately.
entries. Two systems that adjust from
either 4 ft. to 7 ft. (1.2m - 2.1m) orr 6 ft.
to 10 ft. (1.8m - 3m) are available for
TANK POD MOUNTING OPTIONS
osition
jobsite flexibility and to better position
uarters.
the attendant in close working quarters. 8525274
TANK POD CLAMP-ON ADAPTERS
e.
Custom lengths are also available.
Set of 3 clamp-on adapters designed to secure to a vertical flange of a vessel and
Please call for details. provide a means of attaching the tank pod 8513700 without welding or bolting.
Stainless steel construction, accommodates tank flange thickness of up to 1.25".
Note: Winch not included – please order separately. Requires at least a 3" tall flange for proper connection.
8515299 Mounting Stud Extension Adaptor (3 pack) 1/2" NC - 5/8" NC

(12.7mm - 15.8mm)
8515300 Mounting Stud Extension Adaptor (3 pack) 5/8" NC - 5/8" NC

POLE HOIST ACCESSORIES (15.8mm - 15.8mm)
8515301
8530252 Mounting Stud Extension Adaptor (3 pack) 3/4" NC (19mm - 15.8mm)
EXTENDABLE POLE HOIST - 4 FT.-7 FT. (1.2m-2.1m) 8515981 Stainless Steel Multiple Angle 3/4" (19mm) Weld-On Studs (3 pack)
Extension with swivel head and winch mounting bracket,
T-bar leg assembly and hardware/fasteners.
TANK POD ACCESSORIES
8515982 Wheel Cart for Tank Pod
8516012 Tank Pod Mast Extension (12.7mm - 15.8mm)

8530253 Note: Winch not included – please order separately.
EXTENDABLE POLE HOIST - 6 FT.-10 FT. (1.8m-3m)
Extension with swivel head and winch mounting bracket,
8520777
T-bar leg assembly and hardware/fasteners. CLAMP-ON ANCHOR FOR POLE HOIST
Designed to secure to a vertical or horizontal flange
Weight: 14 lbs. (6.4kg) up to 6" (15.2cm) thick and provide an anchorage
point to connect a pole hoist device to.
8513329 Carrying Bag for 4 ft.-7 ft. Pole Hoist
8513330 Carrying Bag for 6 ft.-10 ft. Pole Hoist
8515299 8515981 8515982 8516012

8514803 MAST EXTENSION OPTIONS
ARM ASSEMBLY
Side Entry System for permanent mount applications.
8510100 15" (38.1cm) Mast Extension
System includes arm assembly, support post, mast
8514803 • extension and winch mount bracket. Order winch and 8510101 24" (61.0cm) Mast Extension (shown)
fixed base separately. (shown) Weight: 19 lbs. (8.6kg) 8530260
Weight: 44 lbs. (19.9kg) SECONDARY WINCH MOUNT BRACKET
8510102 36" (91.4cm) Mast Extension
Allows you to mount your digital winch underneath,
8514796 Weight: 23 lbs. (10.4kg)
opening up the top winch mount location for a 3-way
SUPPORT POST 8510103 48" (121.9cm) Mast Extension SRL. Includes 8511832 winch mount bracket,
38" to 53.5" (96.5cm – 135.9cm). (shown) Weight: 27 lbs. (12.2kg) 8510207 winch/SRL adaptor and fastener hardware.
ADVANCED SIDE ENTRY
The Side Entry System is

designed for confined space
entry/retrieval and rescue
operations involving horizontal
entries with vertical
positioning or retrieval
required inside the space.
The system is available in two
configurations: permanent and 8514796 •
portable. The permanent system
utilizes a fixed base and extension 8530260 •
post, while the portable system (Optional – not shown) 8510101 •
utilizes an external adjustable tank
collar for adaptation to different
manways. Both types of systems
feature flexible setup options and a FALL ARREST RATED
Accommodates both work support and
fully articulating boom system. fall arrest devices for complete safety.
They are fully adaptable to an infinite
number of manway designs and
surrounding configurations.
ADVANCED FIXED BASE OPTIONS

8530254
SIDE ENTRY SYSTEM FOR PORTABLE
MOUNT APPLICATIONS
System includes arm assembly, external adjustable
tank collar with tie-bar assemblies used to fit outside
of manway and winch mount bracket. Order winch
The Advanced Side Entry System for Permanent Mount applications can be used with a variety of fixed bases. Please see page 120-121 for more information. separately.
Weight: 121 lbs. (55kg)
Note: Shown with winch and fixed base – NOTE: External collar can be sold separately. Winch
these items must be ordered separately. shown above is not included – this must be ordered separately.
128 129
ADVANCED PORTABLE FALL ARREST POST RESCUE DAVIT ARM
8516693
ADVANCED RESCUE DAVIT ARM FOR ADVANCED
PORTABLE FALL ARREST POST
PORTABLE The optional Rescue Davit Arm assembles easily
to the Portable Fall Arrest Post, providing simple
FALL ARREST and efficient rescue and material handling

capabilities. It’s made with lightweight
POST
aluminum materials for easy
transportation and setup.
NOTE: 8516691 post not included –
The Advanced Portable Fall Arrest Post provides please order separately.
protection and complete mobility for three workers
on top of transformers or other types of vertical platforms
with potential fall hazards. Its compact and lightweight
design of only 38 lbs. (17.2kg) makes the post very easy to
transport and put in place. The system features a telescopic
design and 3 swiveling anchor points providing up to 3
workers with 360 degrees of protection and mobility. HLL
57.25" (145.4cm)
Portable and fixed bases provide complete jobsite versatility.

HLL
8516691 46" (116.8cm)
ADVANCED PORTABLE FALL ARREST POST

• 3 independent swiveling tie-off points HLL
32.75" (83.2cm)
• 360 degrees of protection for 3 workers
• Telescopic design; 32.75" (83.2cm) to 46" (116.8cm) to 57.25" (145.4cm)
• Lightweight and durable aluminum construction
• Leveling screws plumb system on inclines up to 15 degrees Rescue Davit Arm can
• Built-in anchor ring for horizontal lifeline attachment be equipped with a
variety of winches
• Portable and fixed bases provide complete jobsite versatility and SRLs.
Telescoping design: Overall height can be adjusted from 32.75" (83.2cm) to 57.25" (145.4cm)
ANCHOR BASES FOR PORTABLE FALL ARREST POST
8516996 8516692 ACCESSORIES

14 FT. (4.2m) 14" (356mm)
UNI-ANCHOR FALL ANCHOR POST EXTENSION
ARREST POST Provides option to tie-off one
The 14 ft. Uni-Anchor Fall worker at an increased height of
Arrest Post mounts using 68.5" (174cm).
Uni-Anchor plates and
extends up to 14 ft. (4.2m)
to provide a 1-man-rated 8517412 8510816 8517413 8516997
fall-arrest anchor point. BARE STEEL UNI-ANCHOR WELD-ON MOUNTING PLATE INCLINE ADAPTOR PLATE UNI-ANCHOR I-BEAM BASE
8517565 WITH TIE-OFF ANCHORS Unplated mild steel construction. WITH TIE-OFF ANCHOR Portable anchor clamps to I-beams.
CARRYING BAG For use in closed environments without Permanently weld to inclined surface.
Weight: 11.6 lbs. (5.3kg) Weight: 56 lbs. (25.5kg)
Heavy duty carrying bag for Portable Fall Arrest Post. chemical or moisture exposure. Weight: 24 lbs. (10.9kg)

ADVANCED
MECHANICAL
SYSTEMS
ADVANCED DIGITAL WINCH SALALIFT™ II WINCH
The mechanical device is
one of the most critical WINCHES
parts of the rescue system.
It provides the means to
ADVANCED DIGITAL WINCH

• 3-WAY SEALED-BLOK™ SRL
retrieve an incapacitated
MOUNTING BRACKET
• Ideal for secondary or back-up
SALALIFT™ II WINCH
worker to safety. • Man rated 420 lb. (190kg) capacity
LIFELINE TYPE
DRIVE TYPE
WINCH BAG
Lifeline type and • Fall arrest system limits forces to
length are just a 900 lbs. (4kN) 50 ft 60 ft 90 ft 120 ft 140 ft 190 ft 240 ft 290 ft
(15.2m) (18m) (27m) (36.5m) (42m) (58m) (73m) (88m)
few of the • Built-in emergency retrieval winch
options. In some
• Input handle with primary brake GALVANIZED STEEL • 8518567 8518568 8518588 8518589 8518610 8518611
• Overload device in winch drive POWER
STAINLESS STEEL • 8518565 8518566 8518586 8518587 8518608 8518609
situations, a • Sealed ball bearings
DRIVE
secondary or • Corrosion resistant aluminum and

TECHNORA ROPE • 8518571
back-up system stainless steel construction • 8518560 8518561 8518581 8518582 8518603 8518604
• Five sizes accommodate 30 ft. to GALVANIZED STEEL
is required. • • • 8102001 8102009 8102005
130 ft. lengths (9m-40m)
• Cable and rope lifelines with REMOVABLE • 8518558 8518559 8518579 8518580 8518601 8518602
swiveling snap hook and STAINLESS STEEL
HANDLE
impact indicator • • • 8102003 8102011 8102007
• Carrying handle for easy transport • 8518564

TECHNORA ROPE
ADVANCED DIGITAL WINCHES • • • • 8102050

30.5 lbs. 32.5 lbs. 38.5 lbs. 40 lbs. 43 lbs. 50 lbs. 53.5 lbs.
• Man rated 450 lb. (204kg) capacity CABLE MODEL WEIGHT –
(13.8kg) (14.7kg) (17.5kg) (18.4kg) (19.5kg) (22.6kg) (19.5kg)
• Digital usage indicator tracks TECHNORA ROPE 27 lbs 27 lbs
drum revolutions to determine MODEL WEIGHT (12.2kg) (12.2kg)
service intervals
Note: Advanced Digital Winch includes a mounting bracket. The Salalift™ II Winch includes a mounting bracket and carrying bag.
• Triple redundant braking
system for added safety
• Sealed bearings at all contact points
• Two gear ratio options of 4:1 and 9:1
• Power drive option available
• Three sizes accommodate 70 ft. to
300 ft. lengths (21m-91m)
• Cable and rope lifelines with swiveling
snap hook and overload indicator
• Carrying handle for easy transport
• Corrosion resistant zinc plated steel or
anodized aluminum hardware
SEALED-BLOK™ 3-WAY SRL SEALED 3-WAY SRL
3-WAY SELF RETRACTING LIFELINES

SALALIFT™ II WINCHES
• Man rated 350 lb. (159kg) capacity • Cable and rope lifelines with swiveling WORKING LENGTH
• Overload clutch snap hook and impact indicator
CABLE TYPE 30 ft 50 ft 85 ft 130 ft
• Gear ratio of 6:1 • Carrying handle for easy transport
(9.1m) (15.2m) (25.9m) (39.6m)
• Free-wheel mode • Corrosion resistant construction
• Shielded ball bearings • Quick-mount bracket and carrying bag GALVANIZED STEEL 3400853 3400923 3400311 3400509
• Lengths from 60 ft. to 120 ft. STAINLESS STEEL 3400857 3400924 3400309 3400508
(18m-36.5m) available
WEIGHT 25 lbs. (11.3kg) 34 lbs. (15.4kg) 59.4 lbs. (27kg) 82.8 lbs. (37.5 kg)
Note: All of the 3-way SRLs above also include a mounting bracket and carrying bag.

WINCH BRACKETS AND ACCESSORIES

CUSTOM SOLUTIONS
Unique situations call for special solutions. DBI-SALA
A™ designed and built the systems below, for use in
8518507 one-of-a-kind applications. If you do not find a solution
ion within this catalog, contact us today and we’ll
8 FT LADDER SECTION
Complete with connector channels and positive pin work together to solve the challenge. We never compromise
promise on rescue – neither should you.
locks. Can be connected to additional ladders (up to 5
sections) for a maximum length of 32 ft. (9.75m).
8518508 4 ft. ladder section

8518506 CUSTOM SOLUTION EXAMPLES
ADJUSTABLE LADDER BRACKET 8517567
Designed to allow use of the ladder section(s) PADDED CARRYING BAG
8518507 with various base, sleeve and mast For digital winch.
options. Installs over mast/extension.
STRAP MOUNTED DAVIT
AVIT BASE
Custom base with tie-down
own straps provides I-BEAM MOUNTED DAVIT
anchorage point for davit
vit system on raised BASE AND ARM
manways and smaller storage tanks. Custom base attaches to I-beams,
providing an anchorage point
for a basic davit arm.
8512936
8516491 OVERLOAD PROTECTION CLUTCH
Features a maximum working load of 450 lbs.
30 DEGREE INCLINE WINCH/SRL
ADAPTER BRACKET 8512935 Overload Protection Clutch
To attach winch/SRL to 11-1/2" - 27-1/2" Features a maximum working BOLT-ON SIDE ENTRYY SYSTEM
offset upper mast. load of 250 lbs. Custom designed to boltt onto a flanged side
entry manway to providee an anchorage for a
8516480 40 Degree Incline Winch/SRL
winch or 3-way SRL.
Adapter Bracket To attach
winch/SRL to 23-1/2" - 42-1/2"
inch offset upper mast.
1001210
RETRIEVAL WRISTLETS BOLT-ON DAVIT BASEE
Rescue/retrieval design is ideal for connection Custom designed to boltt onto a flanged
to victims wrists for narrow extractions. manway to provide an anchorage for a
Yoke wristlets attached to Y-lanyard with davit arm system.
D-ring at end x 2 ft (0.6m).
8516824
QUICK RELEASE MOUNTING BRACKET
For Advanced Upper and Lower Masts.
CONCRETE PARAPETT
CLAMP DAVIT BASE
1231460 Custom designed to attach
ach to
Y-LANYARD a concrete edge to provide
ide an CALL DBI-SALA™ TODAY TO GET
Rescue/retrieval design ideal for use with harness anchorage for a davit system.
ystem. STARTED ON YOUR CUSTOM SOLUTION
incorporating shoulder D-rings. Spreader bar with PERFORMANCE-DESIGNED FOR
CRITICAL EMERGENCY SITUATIONS.
8510207 snap hooks at ends, D-ring at center x 2 ft. (0.6m).
WINCH/SRL ADAPTER WITH FLAT BACK 1231470 Y-Lanyard without spreader
To attach DBI-SALA™ winch/SRL to structures. bar x 2 ft. (0.6m)

RESCUE AND DESCENT
When things get real hairy, real fast, you can rely on DBI-SALA™.
IN YOUR That’s because we have the most complete line of safe and
effective rescue and retrieval gear in the industry. Our systems meet
applicable industry standards.
BUSINESS, Safety engineers and site directors trust us for our rugged, quality systems
that operate fast and flawlessly. Often, a DBI-SALA™ system has made the
YOU CAN’T difference between life and death. Remember, during an emergency
when quick escape or rescue is vital, every second counts.
ALWAYS RELY CHOOSING RESCUE AND DESCENT SYSTEMS
The type of jobsite, anchor location, working load and limit, and ease of use are some important
considerations when choosing the appropriate rescue and descent system. A single rescue
ON 911. system cannot efficiently handle every scenario, performing well for one application but not
another. Some rescue systems are easy to use for one application, while others require more
skill but can be adapted for use in multiple situations. Please refer to the chart below and
YOU HANDLE IT. the following pages to assist you in choosing the proper system.
Rollgliss™ Rollgliss™ Rollgliss™ Rollgliss™ Rollgliss™ Fisk

Rescue and Descent Scenario Rescumatic™ RPD
Descender R250 R350 R500 Self Rescue Descender™
Evacuation/Emergency Escape • • • N/A • • • •

Automatic Controlled Descent • • N/A N/A N/A • N/A N/A
Work Positioning N/A N/A • N/A • N/A N/A •

User Controlled Ascent
(Self Rescue)
N/A N/A • N/A • N/A N/A N/A
User Controlled Descent

(Self Rescue) • • • N/A • • • •
Co-Worker Controlled Ascent
(Assisted Rescue)
N/A N/A • • • • N/A N/A
Co-Worker Controlled Descent

(Assisted Rescue) • • • • • • N/A •
Can Be Used Over a Leading Edge N/A N/A N/A N/A N/A • N/A N/A
Capable of Doing Pick-Offs N/A N/A • N/A • • N/A N/A
Rescue Retrieval Pole Capable N/A N/A • • • • N/A N/A
Maximum Height of Operation (Feet) 1000 200 450 (3:1) 99 330 (3:1) 1083 55 Unlimited
Amount of Lifeline Needed per ft of Rescue Height 1 1 3-4 1 2-5 1 1 1
Maximum Number of Users (Emergency Use) 1 1 2 1 2 2 1 1
• Minimal training, primary use of device

Some Models Equipped with
• Moderate training, secondary use of device
• Requires additional training
N/A Not applicable
136 137
RESCUE AND DESCENT
ROLLGLISS ™ R500 RESCUE AND DESCENT
• ANCHORAGE
Used to anchor the
device with either a
R500 RESCUE AND carabiner or sling.
Ladder Bracket
Humidity Case
DESCENT DEVICE
Rescue Hub
• LIFTING HANDLE
The Rollgliss™ R500 offers the choice Provides added leverage 100 ft. 200 ft. 300 ft. 400 ft. 500 ft.
during assisted rescue,
of controlled descent rescue, (30m) (61m) (91m) (122m) (152m)
and stows away for storage.
evacuation • • • 3324100 3324200 3324300 3324400 3324500
or the • RESCUE HUB
versatility of Used during assisted rescue • • 3320100 3320200 3320300 3320400 3320500
to slightly raise the fallen
assisted rescue
worker to disengage
with lifting primary fall protection
• • 3323100 3323200 3323300 3323400 3323500
capabilities. system, so descender can

lower the victim to the 3321100 • 3321100 3321200 3321300 3321400 3321500
This fully automatic ground. (Optional)
controlled descent 3322100 3322200 3322300 3322400 3322500
feature, at 2-3 ft.
per/second (0.6-0.9m), • ALUMINUM HOUSING • All Models above also include the following: 3 ea. Anchor Slings, 3 ea. Carabiners, 1 ea. Pulley, 1 ea. Edge
Protector, 1 ea. Rope Grab, 1 ea. Carrying Bag
Reduces overall weight and • Other lengths available in 25 ft. (7.5m) increments.
sets new standards of helps to dissipate heat • If you already own a Rollgliss™ R500 and want to add a Ladder Bracket, order 3322002.
performance and safety. during descent for better

performance.
Ideal for rescue and
evacuation from heights
• LADDER BRACKET
up to 1,000 ft. (300m) for one Quickly and easily attaches
user 310 lb. (140kg) or 330 ft. device to the rungs of a
(100m) for two users totaling fixed ladder. (Optional)
550 lbs. (248kg). Unique bidirectional
design allows one end of the lifeline Model Shown • PIGTAIL
to descend while the other ascends, 3320100 Provides added control
during one or two user
ready for another rescue. rescue operations.
PULLEY 3324100
3323100
Use to re-direct the rescue line.
Allows R500 to be installed at ground
level with pulley above, minimizing
load being carried up the ladder. 3320100
• 3322100
RESCUE AND DESCENT

• CAM CLEAT
Used in conjunction with
EDGE PROTECTOR the Pigtail to lock-off the
Protects the rescue line from device and stop or hold
contact with sharp edges and the victim during rescue.
helps to reduce friction.
• LIFELINE HOOK HUMIDITY RESISTANT CASE

Patented self locking snap hook is Fully sealed case provides 10 year minimum storage life, substantially reducing inspection and maintenance costs. Fits up
industry preferred and compatible
to a 500 ft. (152.5m) system. External humidity indicator allows user to inspect the seal without opening case. (Optional)
with our First-Man-Up™ System for
remote rescue capabilities. • If you already own a Rollgliss™ R500 and want to add a Humidity Case, order 9505615.

RESCUE AND DESCENT
DESCENDER
The Rollgliss® Descent Device will get personnel down safely
LIFELINE MATERIAL
R350 RESCUE SYSTEMS
DESCENT TYPE
from high places when quick escape is vital. Either vertical
LOW OR HIGH
RETRACTION
OR MANUAL
AUTOMATIC
or sloped descent models are available to provide complete
SPEED
The Rollgliss™ R350 system provides efficient hauling, but more importantly, very 115 ft 200 ft
versatility and flexibility for any job (35m) (61m)
controlled lowering (a finger and thumb are all that is required to hold a load). This site or work environment. Auto Low 3303000
system also allows you to change the hauling ratios on the fly with quick release GALV
VERTICAL
• Simple design for easy Manual Low 3303017
pulleys, allowing custom rigging for different applications and jobsites. installation and use Auto Low 3303002
SS
• No power source or special Manual Low 3303018
• Interchangeable pulley system with a 3:1 ratio standard skills or tools required
Auto Low 3303001
(optional ratios of 2:1 to 5:1 available) • Simply connect to harness GALV
Manual High 3303015
and step off structure
SLOPED
• Includes everything you’ll need for efficient rescue
for evacuation Auto Low 3303003
• Rope retention bar does not allow rope to twist or overlap
• Use repeatedly without SS Low 3303019
• Visual and audible function controls factory servicing after Manual
user inspection High 3303016
• Static kernmantle rope for optimum performance
• Quick connect system allows fast insertion of various pulleys • Corrosion resistant NOTE: Sloped low speed models also include linkage, guide cable sleeve and suspension bars. Sloped high speed
construction for models include linkage, braking trolley and suspension bars.
maximum durability
• Wire rope lifeline for
added durability in
extreme environments
ROLLGLISS ™ R350 RESCUE AND DESCENT
8902004 Rollgliss™ R350 Rescue System, 50 ft. travel / 200 ft. of 3/8" rope (15.25m / 61m), 3:1 ratio with pulleys, rope control device,
anchor strap, carabiner and carrying bag.
8902006 Rollgliss™ R350 Rescue System, 100 ft. travel / 400 ft. of 3/8" rope (30.5m / 122m), 3:1 ratio with pulleys, rope control device, RESCUMATIC™ AUTOMATIC DESCENT CONTROLLER
anchor strap, carabiner and carrying bag.
NOTE: Other lengths available in 10 ft. (3m) increments. Accessories including 2:1, 4:1 and 5:1 pulleys are also available. Rescumatic™ provides safe, automatic controlled descent from overhead cranes, towers, buildings or other heights.
The system safely lowers the endangered worker, or workers, at a controlled rate of 3 ft. (0.9m) per second.
• Pre-rigged for quick and easy installs and use

RPD RESCUE POSITIONING SYSTEM • No power source or special skills or tools required
This system provides a safe, simple rescue system with features for raising, lowering and positioning during normal work activities. The RPD unit • Simply don body support and step off structure
includes a speed sensing lock for added safety and allows you to manually lock off the device once you reach a work level. It’s ideal for servicing for evacuation
buildings, bridges and dams, as well as within confined spaces. It may be operated by the user or a second standby worker. • Bidirectional design, one end of lifeline descends
while other ascends
• Pre-rigged for quick and easy installation and use • Lock-out mechanism allows user to stop/start anywhere 3300050
RESCUE AND DESCENT

• No special tools, power source or extensive skills needed • 3:1 or 4:1 lifting ratio configurations available • Galvanized wire core polyester rope for added strength
• Built-in brake stops a fall should user lose control • Durable, corrosion resistant construction
3600050 Rescue Positioning Device, 50 ft. travel / 210 ft. of 3/8" rope (15.25m / 64m), 3:1 ratio 3300050 ™
50 ft. (15.2m) Rescumatic system with body support,
with pulleys, rope anchor straps, two carabiners and carrying bag. anchoring carabiner, rope spool and bag
3600100 Rescue Positioning Device, 100 ft. travel / 410 ft. of 3/8" rope (30.5m / 125m), 3:1 ratio 3300100 ™
3602050 Rescue Positioning Device, 50 ft. travel / 260 ft. of 3/8" rope (15.25m / 79.3m), 4:1 ratio 3300150 ™
3602100 Rescue Positioning Device, 100 ft. travel / 510 ft. of 3/8" rope (30.5m / 155.5m), 4:1 ratio 3300200 ™
200 ft. (61m) Rescumatic system with body support,
Other lengths available – please call for details.

RESCUE AND DESCENT
8900292
ROLLGLISS™ R250 RESCUE KIT
The system is simple, yet completely safe and efficient. It enables
3304001 the rescuer to remove a person from danger without putting
themselves at risk by descending to them.
ROLLGLISS™ SELF RESCUE DEVICE
Ideal for use in bucket trucks, you simply connect the system to an anchorage point • 33 ft. (10m) travel length
capable of supporting 1,500 lbs. and you’re • Kit is easily transported in backpack type bags
ready to go. Then don the body support and • Takes only a few minutes to set up and perform a rescue
simply throw the small bag with the lifeline • Rescue is performed safely from above victim
webbing over the edge and begin your • Kit includes all necessary components for safe rescue
descent. As you adjust the hand-lever up 8900293
or down, you can control the speed of your Rollgliss™ Rescue Kit with
descent. An added bonus is that the system 66 ft. (10m) travel length
can be used by two workers in an assisted
descent situation. 8900294
Rollgliss™ Rescue Kit with
• Compact, simple and reusable design
99 ft. (30m) travel length
• Installs in seconds
• Hand-lever provides complete control of descent rate
• Permanently attached support slings
• Non-conductive/corrosive construction
2103189
FISK DESCENDER™
The Fisk Descender™ is a simple, effective descent control system designed for durability, thermal 8516294
capacity and smooth flow. During descent, the operators can tie off the system and position themselves ROLLGLISS™ RESCUE LADDER
at a specific work level. It is also very reliable, requiring minimal maintenance and can be used in a The Rollgliss™ ladder provides a way to assist rescue after a fall has occurred. It can
variety of applications, including window washing, tower and turbine work. be anchored to a structure and dropped down to the victim’s level, so they can climb
• Gentle flow for 19" (48.3cm) of lifeline to pass through the descender either up or down to safety. The ladder can be used by any able-bodied victim not
• Large radius for smoother descent and less wear to lifeline incapacitated by the fall.
• Reduction in rope hockling and torsional twist • Available in 8 ft. (2.4m) sections
• Durable 304 stainless steel construction • Extra sections can be added together for longer length
• Includes three carabiners for attachment
8516316
ROLLGLISS™ RESCUE LADDER ANCHOR
Accessory plate for mounting rescue ladder to a davit arm or single anchorage point.
RESCUE AND DESCENT

3604100
ROLLGLISS™ SRL RESCUE DEVICE 5900177
This system is designed to rescue a worker who has fallen while using a cable self retracting lifeline. TENSION LIMITER
Utilizing either the chain or cable grab that comes with the system, it can be anchored to a separate Unique device attaches to man-riding system in-line between the person and the raising/
structure, around the SRL housing or in-line with the SRL cable. Once anchored, it takes seconds to lowering line to warn operator and limit forces on an entangled worker.
complete the installation and begin the rescue procedure. • Limits loading on person to 400 lbs. (182kg) to prevent severe injury when entangled
• Simplistic design makes rescue of fallen personnel fast and efficient • High visibility line is easy to see should deployment occur
• System can be installed and ready for use in under a minute for added safety • Portable and lightweight for easy transport and quick set up
• Fits SRL cable sizes from 5/32" (4mm) to 5/16" (8mm) • System is easily reset in the field
• Lifting ratio of 6:1 - victim raised about 5" (12cm) per stroke for rapid rescue NOTE: Always use a separate back up fall protection device with this system.
• 420 lbs. (190kg), single user capacity for jobsite flexibility

NET TING AND GUARDRAILS
GRAB THE RIGHT Even if you never use it, you’ll feel better
knowing there’s a DBI-SALA™ netting or
NETTING OR
guardrail system protecting you.
DBI-SALA™ nets and guardrails provide passive fall

protection, which means that we provide protection
GUARDRAIL SYSTEM that does not require the active involvement of a

worker. Our Sinco™ netting systems lead the industry
in strength, impact resistance, durability and worker
AND IT RETURNS THE FAVOR. confidence. We manufacture many types of netting for
various applications, and customize solutions to meet
specific jobsite requirements. Our guardrail systems
are freestanding, extremely simple to set-up and offer
unlimited configurations for accommodating your needs.
All of our netting and guardrail systems meet or
exceed OSHA and ANSI standards.
144 145
PERSONNEL/ If you were to envision and create the ideal netting solution, your system
would likely be designed to reliably catch both falling personnel and
DEBRIS NETS debris. DBI-SALA™ has developed the technology to provide you with a
single solution for both personnel and debris; because we all know that
falls of either type can be detrimental to a project and a company.
SINCO™ BORDER GUARD™

Border Guard™ is a DBI-SALA™ exclusive. It’s the first
lightweight debris/personnel system made for rigging
nets around the perimeter of new concrete buildings.
™
Adjust-A-Net System Border Guard™ is a convenient, economical way to
ensure protection, confidence and productivity at your
building site. It allows single floor attachment for
closer protection at the pour level. Unlike alternative
CHOOSING A NETTING SYSTEM systems, Border Guard™ comes in convenient units

and installs with sturdy hardware that’s half the
Look for quality in these features when selecting netting. weight of the old style net systems.
QUALITY MATERIAL
• Meets ANSI and OSHA standards for debris
DBI-SALA™ netting is rot proof, mildew proof and has UV protection for longer lasting containment and for falls by personnel of 10 ft. or less
TYPES OF NETTING service. Typical netting materials are polypropylene and nylon. We use nylon. It’s 47%
• Easily installed, from one level without a crane or
AND NETTING SYSTEMS stronger than polypropylene, provides a softer catch and resists chafing and abrasion. special equipment
Flame retardant protection can be applied at the factory for added safety and long wear.
• Non-destructive floor clamps easily attach to
Nets and netting systems concrete slabs
ADJUSTABILITY
are designed to do three The patented Adjust-A-Net™ is the only personnel net on the market • Nets extend 10' (3m) out from floor edge
things: catch debris, catch that can be adjusted to fit the work area.
personnel or a combination PERIMETER DEBRIS/PERSONNEL NET SYSTEMS

MESH SIZES AND LINERS
of both. Nets with a wide Meshes are available in many sizes and strengths, depending on the job.
Some nets come with liners, so they catch both personnel and debris.
4100151 BORDER GUARD™ STARTER KIT
mesh (holes) are primarily
1 ea. 10' x 30' (3m x 9m) net, 4" (10cm) black mesh with 1/8" (3.2mm) debris
The most common debris net mesh size is 1/8" (3mm). A typical personnel liner and snap hooks, 2 ea. floor clamps, 2 ea. 10' (3m) arms, 2 ea. 1/2" (12.7mm)
used to catch people. Nets
net mesh size is 3-1⁄2" (87.5mm). The diamond-shaped design dissipates shackles, 8 ea. bolts, 6 ea. cable assemblies, 2 ea. straps with cam buckles.
with a smaller mesh can
strain throughout the net.
handle both. And some 4100153 BORDER GUARD™ ADD-ON KIT
wide mesh personnel nets ANCHORING POINTS AND EASE OF INSTALLATION 1 ea. 10' x 30' (3m x 9m) net, 4" (10cm) black mesh with 1/8" (3.2mm) debris
™
DBI-SALA netting systems are available with the related liner and snap hooks, 2 ea. floor clamps, 1 ea. 10' (3m) arm, 1 ea. 1⁄2" (12.7mm)
are available with liners so shackle, 4 ea. bolts, 3 ea. cable assemblies, 1 ea. strap with cam buckle.
cable and hardware for installation to steel or concrete.
N E T T I N G A N D G UA R D R A I L S
Additional size configurations,
they double as debris nets. They’re lightweight and easy to handle for fast, safe
hardware kits and
All meet strict OSHA and installation and shifting from floor to floor. 4100005 BORDER GUARD™ CORNER KIT
1 ea. 12' x 12' x 17’ (3.6m x 3.6m x 5.2m) net, 4" (10cm) black mesh with 1/8" accessories are available.
ANSI regulations. (3.2mm), debris liner and snap hooks, 1 ea. cable assembly.
SNAP HOOKS
DBI-SALA™ netting systems feature a staggered system
of lashed-in snap hooks, allowing the net to be quickly
and easily connected.
Border Guard™ Stanchion

NET TING AND GUARDRAILS Debris nets catch lightweight construction debris, tools and building materials. They
DEBRIS prevent injury to workers, pedestrians, structures and materials below. Unlike hard
PERSONNEL Personnel nets are designed to catch workers in unprotected areas

such as bridges, buildings, towers, dams, silos, atriums, shafts, NETS hats, which protect only the head, Debris Nets offer protection from falling objects for
the whole person. Perimeter debris nets meet OSHA and ANSI standards.
NETS stairwells and skylights.
SINCO™ VERTICAL DEBRIS NET

Its highly visible, bright orange mesh protects workers near building
edges as a guardrail, and replaces mid-rail and toe boards, making it less
expensive and easier to install. Designed for use with traditional cable
set-ups, the nets are easy to remove, relocate, handle and store. Snap-on
cable clips are available for easy attachment to the cables. The bottom edge
of the net is quickly secured using a power tool that fires a nail into the
tie-down plate.
• UV resistant, fire retardant

• Exceeds OSHA’s 200 lb. (90kg) strength requirements
and New York City construction codes
SINCO™ FLYING FORM NET
Flying Form nets are made for today’s multi-story buildings VERTICAL NET DEBRIS SYSTEM
that use “flying forms” to construct concrete floors. Even NET COLOR ATTACHMENT KIT 48" x 100' 66" x 100'
™ ™
SINCO ADJUST-A-NET though there are no tie-off anchorages above, it protects
4100200 4100201
with Optional Debris Liner workers while they’re placing the forming deck. Orange
• 4100300 4100301
™
• One time installation • UV protected nylon mesh
Four basic Adjust-A-Net models fit any size or shaped work spaces. You can shrink one 4100204 4100205
• Passive fall arrest and Blue
down for compact areas, reduce one side or the other for long, narrow applications or snap debris retention • 4100304 4100305
two together for the largest areas. Adjust-A-Net™ must be erected so that workers can
never fall more than 25' (7.5m). 4102003 Flying Form Netting System (specify custom size) 4100003 Attachment Kit Only - 55 zip clips and 22 tie-down plates
• Adjustable straps allow 50% reduction of its original size

4100275 25-pack of cable ties, 20" nylon, 250 lb.
• 3-1/2" (8.75cm) provides better protection

• Special coating protects from UV light, resists abrasion, bonds all convergent points
• Built-in test cords allow evaluation of integrity
SINCO™ FLOOR-TO-CEILING
• Rugged steel snap hooks placed every 48" (1.2m) DEBRIS NET
• Available attached debris liner with 1/8" (3.2mm) mesh Our floor-to-ceiling panels provide complete containment of project debris
• Long-wearing, high-tenacity nylon, tested to 17,500 lb. (70kN) and are strong enough to meet guardrail requirements for personnel.
Debris panels are easily connected to a top and bottom cable and
ADJUST-A-NET™ PERSONNEL NETS are reusable throughout the life of the project. Multiple floors can be
DEBRIS 10' x 5' 10' x 10' 10' x 15' 15' x 30' 20' x 40' 25' x 50' 30' x 60' protected, prior to clean up, and then nets can be rotated upward, ahead
LINER (3m x 1.5m) (3m x 3m) (3m x 4.5m) (4.5m x 9m) (6m x 12m) (7.5m x 15m) (9m x 18m)
SINCO™ POUR-IN-PLACE NET of the cladding or glazing operations.
4100100 4100101 4100102 4100103
Pour-In-Place netting provides personnel fall protection on
FLOOR-TO-CEILING DEBRIS NETTING SYSTEM
unprotected floor openings. It’s designed to cover small voids
• 4100406 4100405 4100404 4100400 4100401 4100402 4100403
such as stairwells, mechanical chases or elevator shafts, by 4102000 Floor-to-Ceiling Vertical Net System
being poured into the concrete. Custom sizes are available. 3-layer netting, with snap hooks, 9'6" tall x 30'
(2.9m x 9.15m)
• Passive fall arrest and • Durable nylon mesh 4195436 Floor-to-Ceiling Fastener Plates, 16-pack
debris retention • Fast, easy removal
Custom sizing available – please call.
4102001 Pour-In-Place net, 8' x 50' (2.4m x 15.4m),
no border, black
4102002 Pour-In-Place net, 8' x 100' (2.4m x 30.5m),
no border, black

PORTABLE CONSTRUCTION
GUARDRAIL SYSTEM 7901000
This system acts as a barrier preventing personnel from PORTABLE
falling to lower levels, thus eliminating the fall hazard.
CONSTRUCTION
GUARDRAIL STANCHION
This system can protect employees with little or no
Zinc plated steel stanchion
training, special maintenance or gear.
mounts in both parapet and
• Mounts in both parapet and edge grab edge grab configurations
configurations for jobsite versatility to wood or concrete, clamp
• Rapid clamping system expands from 6" to 24" expands from 6"-24" (15.25cm
(15.25cm to 61cm) to 61cm). Use with standard
• Durable zinc plated finish for corrosion resistance wood 2x4’s.
and longevity
• Supports both top and mid-rail guardrails, and toe
boards when used in edge grab configuration
• Use with standard wood 2x4’s or other common
guardrail materials
PARAPET
CONFIGURATION
PORTABLE GUARDRAIL SYSTEM EDGE GRAB

7900060 CONFIGURATION
This system acts as a barrier preventing personnel from GUARDRAIL BASE
falling to lower levels, thus eliminating the fall hazard. This Galvanized base assembly for guardrail
system can protect employees with little or no training, system, 70 lbs. (32kg).
special maintenance or gear.
• Free-standing system eliminates surface penetration

• Built-in rail and toe board receptacles allow for infinite configurations
• Rubber pad provides skid resistance and protects the roof surface
7900005
GUARDRAIL SPLICE KIT
• Ergonomic handles allow for easy transportation and set-up
Powder coated steel splice kit allows user
• Fast and easy set-screw installation, insert rail and tighten to connect customized shortened rail
• Corrosion resistant construction for longevity sections together.
7900007
GUARDRAIL GATE
Powder coated steel swing gate, adjustable
from 23"- 38" (58.4cm-96.5).
7900061 GUARDRAIL ACCESSORIES
GUARDRAIL 7900008 Guardrail Roof Hatch Kit, includes: (4ea) 7900060 Guardrail
6 ft. (1.8m) guardrail section, steel, powder coated.
Bases, (1ea) 7900007 Guardrail Gate, (3ea) 7900005 Guardrail
7900062 8 ft. (2.4m) guardrail section Splice Kits, (3ea) 7900061 6 ft. (1.8m) Rails
7900063 10 ft. (3m) guardrail section
7900054 Guardrail Base Transport Cart, accommodates 4 bases (not shown)

INNOVATION THAT BRINGS WORKERS AT HEIGHT HOME SAFELY.
Capital Safety is a global company solely dedicated to fall protection and rescue. Our focus is razor sharp.
And it continually drives us to design and manufacture the safest possible height safety gear.
We understand the industries we serve and listen to the workers in the field. We employ the best engineers to create
innovative solutions and patent the products that keep workers safe at heights around the world. Capital Safety
has the best quality and largest range of fall protection products in the industry. But we’re more than a product company.
We take an innovative approach in bringing our products to the field. We have created international partnerships and
a vast network of authorized distributors, certified installers and service centers. We offer on-site and in-house training.
And we’re ISO 9001-2000 certified for customer service, as well as manufacturing and engineering.
Capital Safety is one of the world’s leading manufacturers of fall protection and
rescue equipment, with decades of experience and a legacy of innovation. Look for complete
solutions in our extensive line of DBI-SALA™ and Protecta® products.
Capital Safety - USA: 800 328 6146

Canada: 800 387 7484 Latin America: +1 651 385 4301
Asia: +65 65587758 Germany: +49 (0)30 92 03 83 87 00
New Zealand: 0800 212 505 Australia: 1800 245 002
Europe, Middle East, Africa: +33 (0)4 97 10 00 10
Northern Europe: +44 (0)1928 571234
www.capitalsafety.com info@capitalsafety.com
©2011, Capital Safety Form: 9700505 Rev: A

2011 Dbi-Sala Catalog

Uploaded by

Copyright:

Available Formats

2011 Dbi-Sala Catalog

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

2011 Dbi-Sala Catalog

Uploaded by

Copyright:

Available Formats

YOUR

BECAUSE has provided, and still provides today, the

GUYS LIKE YOU We understand that you risk your life

DBI-SALA™ equipment is legendary

Finally, our job isn’t done until you know

SELF RETRACTING LIFELINES 52-63

B BODY SUPPORT VERTICAL SYSTEMS 64-75

CUSTOM ACCESS SOLUTIONS 102-109

CONFINED SPACE RESCUE 110-135

RESCUE AND DESCENT 136-143

NETTING AND GUARDRAIL SYSTEMS 144-151

ﬁelds. We straddle I-beams on construction sites.

We attend tool-box safety discussions with

transportation personnel at 5 a.m. And we review tie-off

challenges on top of a nacelle hundreds of feet in the

air, with wind industry workers. Our people work

hard to understand your job, concerns and challenges

before we design your equipment. That’s how DBI-SALA™

most innovative, high quality fall protection

equipment for the world’s most vital industries.

choice to the wind industry. We

developed specialized ExoFit NEX™

harnesses and Force2™ lanyards,

as well as unique rescue and escape

systems such as the Rollgliss™ R500.

Our Lad-Saf ™ ladder safety systems, offered in both

standard and powered climb assist styles, are trusted by

wind professionals globally.

specialized products, from evolution™

horizontal systems for railcar loading,

to FlexiGuard™ custom access

solutions for semi-truck servicing.

We’ve even designed a patented

fall-arrest-rated vacuum anchor system for aviation workers.

concrete forms. We listened to steel erectors and created

shoulder caps that protect the webbing on our Exoﬁt NEX™

harnesses. EZ-Line™ is today’s most user-friendly horizontal

lifeline system and the world’s only retractable design. Our

industry-ﬁrst, twin-leg Talon™ self retracting lifeline provides

100% protection and mobility.

safety systems and innovative guardrail and netting solutions.

space equipment, Cynch-Lok™ and Saﬂok™ Pole

TRACK SAFETY There are multiple system

EQUIPMENT stored on your own equipment

AND MANAGE This allows for easy access

YOUR SAFETY mobile devices are supported

PROGRAM. safety inspection program.

i-SAFE™ 3.0 NOW WITH MULTIPLE INTEGRATION OPTIONS

• Tracks location and controls distribution of equipment

Very Small Small Small - Medium Large

Assets Tracked 250 (1) Unlimited Unlimited Unlimited

Pre-deﬁned Inspection Templates - Fall Protection Yes Yes Yes Yes

Pre-deﬁned Inspection Templates - Other No Optional Optional Optional

Number of Hand-Held Computers Supported Optional (1) Optional Optional Optional

Email Alerts None Optional Optional Optional

Email Offers None Optional Optional Optional

Reports 5 10 (Plus Optional) 20 (Plus Optional) 20 (Plus Optional)

Process Customization None None Optional Optional

Software Customization None Minimal Optional Full Optional Full Optional