Adjustment Check List R 984 C
Adjustment Check List R 984 C
Adjustment Check List R 984 C
a)
Read value in menu
"i-hours"
2. Test conditions
- Hydraulic oil temperature > 50°C ……… ………
3. Servo pressure
Diesel engine in mode P
Adjustment at PR Valve 51 32+1 49 ……… ………
4. Horsepower regulation
Mode L/F
- Controls in neutral
Horsepower regulating
current ILR ……….. * Y50 ………
Horsepower regulating
pressure PLR ……….. * 59 ………
Mode E
- Controls in neutral
Regulating current ILR ……….. * Y50 ……… Use adapter wire to measure ILR on
Regulating pressure PLR ……….. * 59 ……… solenoid valve Y50.
Mode P * ILR in mA and p(LR) in bar are
- Controls in neutral depending on Bst- version, as given in
Regulating current ILR ……….. * Y50 ……… schedule below
Regulating pressure PLR ……….. * 59 ………
Bst Mode Mode Mode
In mode P, and with engine Version L/F E P
loaded so the RPM drops
V2.6
below nominal RPM ILR P ~470 mA Y50 ………
V2.10 450
+10
mA 750
+15
mA 750
+15
mA
For straight travel, check that the V2.12 +1
7,5 bar
+1
20 bar
+1
20 bar
internal flow limitation M1 is V5.13
activated, and which limits the
pump P3 to 70% of the maximum Y53 400 mA
flow. 57 5 bar
For the checking the green key is
sufficient, when the limitation is not
activated use the red key.
Caution! : to activated the
pressure cut off, push both pedals
forward or backward and open
simultaneously the swing gear
brake
Secondary pressures
(2)
- swing left 400+10 46 ……● *
(Given by valve 10.3)
(2)
- swing right 400+10 47 ……● *
(Given by valve 10.4)
Working pressure
- swing left (2) 380+10 46 ……… ………
(Adjustment at torque control
valve 16.1)
- swing right (2) 380+10 47 ……… ……… (1)
Engine at rated RPM
(Adjustment at torque control (2)
Engine at about 1500 RPM
valve 17.1)
* Not adjustable
Brake torque * ● Should not be checked / readjust.
under normal circumstances