Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

Piping Boq Phase-2

Download as xlsx, pdf, or txt
Download as xlsx, pdf, or txt
You are on page 1of 151

COMPLETE UTILTY SUMMARY FOR GAPI

(INCLUDING GENERATION & DISTRIBUTION)

Generation Distribution

Utility service Required Heat load Heat exchanger/ chiller Pumps Header sizes Remarks

Calculated Heat Calculated Calculated Suction


load Considered heat load m2/TR/Nm3/hr/CFM flow Selected flow rate for pumps header Selected Suction header Calculated discharge header Selected discharge header
(Kcal/hr) (Kcal/hr) (m3/hr) (In mm) (in mm) (In mm) (in mm)

150 m3/hr x 3 nos


SF-1 @ 130 deg C 575441 604213 TBD 131 (2 w+1 std) 215 300 152 200

150 m3/hr x 3 nos


SF-2 @ 32 deg C 588760 618198 TBD 134 (2 w+1 std) 218 350 154 250

Primary pumps:100 m3/hr X 30 mlc @ 3 nos


SF-3 @ 10 deg C 427627 449009 256 TR chiller is required 104 (2 w+1 std) 192 250 136 200
Secondary pumps:100 m3/hr X --mlc @ 3 nos
(2 w+1 std)

SF-4 @ -20 deg C 301757 316845 75 TR chiller is required 75 Primary pumps:30 m3/hr X 30 mlc @ 3 nos 162 150 115 100
(2 w+1 std)
Secondary pumps:30 m3/hr X --mlc @ 3 nos
(2 w+1 std)

Nitrogen 70 50 Nm3/hr 50 Nm3/hr N2 plant is NA NA 80


required

Instrument air 84 100 CFM 100 CFM air compressor with NA NA 80


Dryer skid is required

Breathing Air 48 50 CFM 50 CFM air compressor with NA NA 80


Dryer skid is required

Steam 1174 2500 Kg/hr 2500 Kg/hr @ 7.5 bar is NA NA 100


required

Cooling Water 118 588760 400 TR Cooling tower is NA NA 200


required.
COMPLETE UTILTY SUMMARY FOR GAPI
(INCLUDING GENERATION & DISTRIBUTION)

Generation Distribution

Utility service Remarks


Required Heat load Heat exchanger/ chiller Pumps Header sizes

Calculated Heat load Considered heat load Calculated Suction header Selected Suction header Calculated discharge header Selected discharge header
(Kcal/hr) (Kcal/hr) m2/TR Calculated flow Selected flow rate for pumps (In mm) (in mm) (In mm) (in mm)

SF-1 @ 130 deg C 575441 632985 TBD 137 100 m3/hr x 3 nos 220 250 156 200
(2 w+1 std)

SF-2 @ 32 deg C 588760 647636 TBD 140 125m3/hr x 3 nos 223 300 158 200
(2 w+1 std)

Primary pumps:75 m3/hr X 30 mlc @ 3 nos


SF-3 @ 10 deg C 427627 470390 209 TR chiller is required 109 (2 w+1 std) 197 250 139 200
Secondary pumps:75 m3/hr X --mlc @ 3 nos
(2 w+1 std)

SF-4 @ -20 deg C 301757 331933 35 TR chiller is required 78 Primary pumps15 m3/hr X 30 mlc @ 3 nos 166 100 118 80
(2 w+1 std)
Secondary pumps:15 m3/hr X --mlc @ 3 nos
(2 w+1 std)
UTILITY SERVICES

Stream
S.no Block Description SF1 SF2 SF3 SF4
Description
Selected Selected Selected
Calculated Selected Pipe line Pipe line Pipe line
Flow rate Heat load Flow rate Heat load Pipe line Flow rate Heat load Pipe line Flow rate Heat load Pipe line
Pipe line size Pipe line size size (In size (In size (In
(m3/hr) (Kcal/hr) (m3/hr) (Kcal/hr) size (In (m3/hr) (TR) size (In (m3/hr) (TR) size (In
(In mm) (In mm) mm) mm) mm)
mm) mm) mm)

Wing-I 70 322959 111 200 75 329277 115 200 61 87 104 150 36 51 80 150

1 G.API Wing-II 55 252481 98 100 59 259483 102 100 38 55 82 80 35 49 79 80

G. API 70 322959 111 200 75 329277 115 200 61 87 104 150 36 51 80 150

2 Levo Levo 45 208425 89 100 53 233841 97 100 33 47 76 80 6 8 32 80

3 Myco Myco 130 600827 152 150 185 811935 181 200 68 96 109 100 27 38 69 100

Flow with Block Diversity @ 70% 172 792548 174 250 220 962537 197 250 113 161 141 200 48 68 92 200
PIPERACK SECTION @ C-D GRIDS.

Flow Pipe line size


S.no Pipe description required
m3/hr
Moc Insulation Actual Considered PIPE BEND Flange Blind flangeGaskets Nuts & BoltsRemarks

1 Cyclohexane SS304 -- 6.8 45 40 56 6 19 0 11

2 ACETONE SS304 -- 7.2 46 40 56 6 19 0 11

3 MDC SS304 -- 7.5 47 40 56 6 19 0 11

4 DMF SS304 -- 8.2 49 40 56 6 19 0 11

5 ACETIC ACID SS304 -- 6.5 44 40 56 6 19 0 11

6 METHANOL SS304 -- 6.9 45 40 56 6 19 0 11

7 TOLUENE SS304 -- 3.6 32 40 56 6 19 0 11

8 Isopropyl alcohol SS304 -- 7.3 46 40 56 6 19 0 11

9 MYCHO-FRESH SOL-1 SS304 -- 7.6 47 40 56 6 19 0 11

10 -- 6.8 45 50 56 6 19 0 11

11 CHW Supply MS1 Cold 40 84 100 56 6 19 0 11

12 CHW return MS1 Cold 40 84 100 56 6 19 0 11

150 73 80 15 6
13 Vacuum-01 (wing-1) SS316 -- 5 0 3

150 73 80 15 6
14 Vacuum-02 WING-1 MSPTFE -- 5 0 3
150 73 80 15 6
15 Vacuum-03 WING-1 SS316 -- 5 0 3

150 73 80 15 6
16 Vacuum-04 WING-1 SS316 -- 5 0 3

150 73 80 15 6
17 Vacuum-05( WING-1) SS316 -- 5 0 3

150 73 80 15 6
18 Vacuum-06( WING-1) SS316 -- 5 0 3

150 73 80 15 6
19 Vacuum-07( WING-1) SS316 -- 5 0 3

150 73 80 15 6
20 Vacuum-01 (wing-2) SS316 -- 5 0 3

150 73 80 15 6
21 Vacuum-02 (wing-2) MSPTFE -- 5 0 3

150 73 80 15 6
22 Vacuum-03 (wing-2) MSPTFE -- 5 0 3

1000 154 150 15 6


23 Acidic scubber (wing-I) PPFRP 5 0 3

1000 154 150 15 6


24 Basic scrubber (wing -I) PPFRP 5 0 3

1000 154 150 15 6


25 Acidic scubber (wing-II) PPFRP 5 0 3

1000 154 150 15 6


26 Basic scrubber (wing -II) PPFRP 5 0 3

700 129 150


27 Knock out vent MSHDPE

48 34 40 15 6
28 Instrument air GI -- 5 0 3

45 33 40 15 6
29 Nitrogen GI -- 5 0 3

SUMMARY

MOC LINE SIZE PIPE Flange Blind flan Gaskets Nuts & Bolts
Internal Piperack sections @ below 18.0 mlvl

PIPERACK SECTION @ .18-20 GRIDS. PIPERACK SECTION @ 11-13 GRIDS. PIPERACK SECTION @ 09-09' GRIDS. PIPERACK SECTION @ 02-03 GRIDS. PIPERACK SECTION @ C-D GRIDS.

Flow Pipe line size Pipe Flow Pipe line size Flow Pipe line size Flow Pipe line size Flow Pipe line size
S.no Pipe description required S.no description required S.no Pipe description required S.no Pipe description required S.no Pipe description required
m3/hr m3/hr m3/hr m3/hr m3/hr
Moc Insulation Actual Considered PIPE BEND Flange Blind flange Gaskets Nuts & Bolts Remarks Moc Insulation Actual Considered PIPE BEND Flange Blind flange Gaskets Nuts & Bolts Remarks Moc Insulation Actual Considered PIPE BEND Flange Blind flange Gaskets Nuts & Bolts Remarks Moc Insulation Actual Considered PIPE BEND Flange Blind flange Gaskets Nuts & Bolts Remarks Moc Insulation Actual Considered PIPE BEND Flange Blind flange Gaskets Nuts & Bolts Remarks

1 MYCHO-FRESH SOL-1SS304 -- 4.2 35 40 45 1 15 1 9 1 METHANOL SS304 -- 4.2 35 40 45 1 15 1 9 1 METHANOL SS304 -- 4.2 35 40 45 1 15 1 9 1 Cyclohexane SS304 -- 4.2 35 40 45 1 15 1 9 1 Cyclohexane SS304 -- 4.2 35 40 60 1 20 1 12

2 MYCHO-FRESH SS304 -- 3.8 33 40 45 1 15 1 9 2 ACETONE SS304 -- 3.8 33 40 45 1 15 1 9 2 ACETONE SS304 -- 3.8 33 40 60 1 20 1 12

3 MDC SS304 -- 3.8 33 40 45 1 15 1 9 3 MDC SS304 -- 3.8 33 40 60 1 20 1 12

4 DMF SS304 -- 4.5 36 40 45 1 15 1 9 4 DMF SS304 -- 4.5 36 40 60 1 20 1 12

5 ACETIC ACID SS304 -- 4.1 35 40 45 1 15 1 9 5 ACETIC ACID SS304 -- 4.1 35 40 60 1 20 1 12

8 METHANOL SS304 -- 3.9 34 40 45 1 15 1 9 8 METHANOL SS304 -- 3.9 34 40 60 1 20 1 12

9 TOLUENE SS304 -- 3.6 32 40 45 1 15 1 9 9 TOLUENE SS304 -- 3.6 32 40 60 1 20 1 12

10 Isopropyl alcohol SS304 -- 3.8 33 40 45 1 15 1 9 10 Isopropyl alcohol SS304 -- 3.8 33 40 60 1 20 1 12

11 MYCHO-FRESH SOL-1 SS304 -- 4.2 35 40 60 1 20 1 12


Internal Piperack sections @ below 18.0 mlvl

PIPERACK SECTION @ .18-20 GRIDS. PIPERACK SECTION @ 11-13 GRIDS. PIPERACK SECTION @ 09-09' GRIDS. PIPERACK SECTION @ 02-03 GRIDS. PIPERACK SECTION @ C-D GRIDS.

Flow Pipe line size Flow Pipe line size Flow Pipe line size Flow Pipe line size Flow Pipe line size
S.no Pipe description required S.no Pipe description required S.no Pipe description required S.no Pipe description required S.no Pipe description required
m3/hr m3/hr m3/hr m3/hr m3/hr
Moc Insulation Actual Considered PIPE BEND Flange Blind flange Gaskets Nuts & Bolts Remarks Moc Insulation Actual Considered PIPE BEND Flange Blind flangeGaskets Nuts & BoltsRemarks Moc Insulation Actual Considered PIPE BEND Flange Blind flangeGaskets Nuts & BoltsRemarks Moc Insulation Actual Considered PIPE BEND Flange Blind flangeGaskets Nuts & Bolts Remarks Moc Insulation Actual Considered PIPE BEND Flange Blind flangeGaskets Nuts & Bolts Remarks

1 Fire hydrant line MS1 -- 45 1 15 1 9 1 Fire hydrant line MS1 -- 45 1 15 1 9 1 Fire hydrant line MS1 -- 45 1 15 1 9 1 Fire hydrant line MS1 -- 45 1 15 1 9 1 Fire hydrant line MS1 -- 60 1 20 1 12

58 37 25 58 37 25 58 37 25 58 37 25 116 52 40
2 Nitrogen GI -- 45 1 15 1 9 2 Nitrogen GI -- 45 1 15 1 9 1 Nitrogen GI -- 45 1 15 1 9 2 Nitrogen GI -- 45 1 15 1 9 2 Nitrogen GI -- 60 1 20 1 12

45 33 25 45 33 25 45 33 25 45 33 25 90 46 40
3 Instrument air GI -- 45 1 15 1 9 3 Instrument air GI -- 45 1 15 1 9 2 Instrument air GI -- 45 1 15 1 9 3 Instrument air GI -- 45 1 15 1 9 3 Instrument air GI -- 60 1 20 1 12

2.5 42 40 4.2 35 4.2 35 40 2.5 42 40 150 73 80


4 RO Water UPVC -- 45 1 15 1 9 4 Purified water SS316(EP) -- 40 45 1 15 1 9 3 Purified water SS316(EP) -- 45 1 15 1 9 4 RO Water UPVC -- 45 1 15 1 9 4 Vacuum-01 (wing-1) SS316 -- 60 1 20 1 12

150 73 80 150 73 100 150 73 100 150 73 100 150 73 80


5 Vacuum-08 SS316 -- 45 1 15 1 9 5 Vacuum-10 SS316 -- 45 1 15 1 9 5 Vacuum-02 MSPTFE -- 45 1 15 1 9 5 Vacuum-01 SS316 -- 45 1 15 1 9 5 Vacuum-02 WING-1 MSPTFE -- 60 1 20 1 12

150 73 285 82 80 150 73 80 150 73 100 150 73 80


6 Vacuum-09 MSPTFE -- 80 45 1 15 1 9 6 Acidic scubber (WING-II) PPFRP 45 1 15 1 9 6 Vacuum-07 SS316 -- 45 1 15 1 9 6 Vacuum-02 MSPTFE -- 45 1 15 1 9 6 Vacuum-03 WING-1 SS316 -- 60 1 20 1 12

457 104 100 150 73 80 150 73 80 150 73 80


7 Acidic scubber (WING-II) PPFRP 45 1 15 1 9 7 Basic scrubber (WING-II) PPFRP 285 81.995633 80 45 1 15 1 9 7 Vacuum-05( WING-1) SS316 -- 45 1 15 1 9 7 Vacuum-03 SS316 -- 45 1 15 1 9 7 Vacuum-04 WING-1 SS316 -- 60 1 20 1 12

457 104 100 323 87 150 150 73 80 150 73 80


8 Basic scrubber (WING-II) PPFRP 45 1 15 1 9 8 Knock out vent MSHDPE 253 77.255348 80 45 1 15 1 9 8 Acidic scubber (WING-I) PPFRP 45 1 15 1 9 8 Vacuum-04 SS316 -- 45 1 15 1 9 8 Vacuum-05( WING-1) SS316 -- 60 1 20 1 12
KNOCKOUT VENT 323 87 80 150 73 80 150 73 80
9 Knock out vent MSHDPE 346 90.345462 150 45 1 15 1 9 MS1 80 45 1 15 1 9 Basic scrubber (WING-I) PPFRP 45 1 15 1 9 9 Vacuum-05 SS316 -- 45 1 15 1 9 9 Vacuum-01 (wing-2) SS316 -- 60 1 20 1 12
KNOCKOUT VENT Knock out vent MSHDPE 285 82 80 45 1 15 1 9 150 73 80 150 73 80
MS1 150 45 1 15 1 9 CA GI 25 45 1 15 1 9 10 Vacuum-06 SS316 -- 45 1 15 1 9 10 Vacuum-02 (wing-2) MSPTFE -- 60 1 20 1 12
KNOCKOUT VENT
MS1 80 45 1 15 1 9 457 104 150 803 138 150
CA GI 25 45 1 15 1 9 BA GI 25 45 1 15 1 9 11 Acidic scubber (WING-II) PPFRP 45 1 15 1 9 11 Acidic scubber (WING-I) PPFRP 60 1 20 1 12

CA GI 25 45 1 15 1 9 457 104 100 914 147 150


BA GI 25 45 1 15 1 9 CHW SUPPLY MS1 100 45 1 15 1 9 Basic scrubber (WING-II) PPFRP 45 1 15 1 9 12 Basic scrubber (WING-I) PPFRP 60 1 20 1 12

BA GI 25 45 1 15 1 9 Knock out vent MSHDPE 346 90 150 45 1 15 1 9 346 90 150


CHW RETURN MS1 100 45 1 15 1 9 13 Acidic scubber (WING-II) PPFRP 60 1 20 1 12
KNOCKOUT VENT
CHW SUPPLY MS1 100 45 1 15 1 9 MS1 150 45 1 15 1 9 Basic scrubber (WING-II) PPFRP 0 0 150 60 1 20 1 12
HW SUPPLY MS1 50 45 1 15 1 9 14

CHW RETURN MS1 100 45 1 15 1 9 CA GI 25 45 1 15 1 9 Knock out vent MSHDPE 0 0 150 60 1 20 1 12


HW RETURN MS1 50 45 1 15 1 9 15
KNOCKOUT VENT
HW SUPPLY MS1 50 45 1 15 1 9 BA GI 25 45 1 15 1 9 MS1 200 60 1 20 1 12

HW RETURN MS1 50 45 1 15 1 9 CA GI 40 60 1 20 1 12

BA GI 40 60 1 20 1 12

CHW SUPPLY MS1 100 60 1 20 1 12

CHW RETURN MS1 100 60 1 20 1 12

HW SUPPLY MS1 50 60 1 20 1 12

HW RETURN MS1 50 60 1 20 1 12
Internal Piperack sections @ below 11.0 mlvl

PIPERACK SECTION @ 18-20 GRIDS. PIPERACK SECTION @ 11-13 GRIDS. PIPERACK SECTION @ 09-09' GRIDS. PIPERACK SECTION @ 02-03 GRIDS. PIPERACK SECTION @ C-D GRIDS.

Pipe line size Flow Pipe line size Flow Pipe line size Pipe line size Pipe line size
S.no Pipe Flow required S.no Pipe required S.no Pipe description required S.no Pipe Flow required S.no Pipe description Flow required
description m3/hr description m3/hr m3/hr description m3/hr m3/hr
Moc Insulation Actual Considered PIPE BEND Flange Blind flange Gaskets Nuts & Bolts Remarks Moc Insulation Actual Considered PIPE BEND Flange Blind flange Gaskets Nuts & Bolts Remarks Moc Insulation Actual Considered PIPE BEND Flange Blind flange Gaskets Nuts & Bolts Remarks Moc Insulation Actual Considered PIPE BEND Flange Blind flange Gaskets Nuts & Bolts Remarks Moc Insulation Actual Considered PIPE BEND Flange Blind flange Gaskets Nuts & Bolts Remarks
1 SF-1 Supply 1 SF-1 Supply 1 SF-1 Supply 1 SF-1 Supply 1 SF-1 Supply
MS1 Hot 101 134 150 45 1 15 1 9 MS1 Hot 38 82 100 45 1 15 1 9 MS1 Hot 33.87 78 100 45 1 15 1 9 MS1 Hot 64.55 107 150 45 1 15 1 9 MS1 Hot 270 219 200 60 1 20 1 12
2 SF-1 return 2 SF-1 return 2 SF-1 return 2 SF-1 return 2 SF-1 return
MS1 Hot 101 134 150 45 1 15 1 9 MS1 Hot 38 82 100 45 1 15 1 9 MS1 Hot 33.87 78 100 45 1 15 1 9 MS1 Hot 64.55 107 150 45 1 15 1 9 MS1 Hot 270 219 200 60 1 20 1 12
3 SF-2 Supply 3 SF-2 Supply 3 SF-2 Supply 3 SF-2 Supply 3 SF-2 Supply
MS1 128 151 150 45 1 15 1 9 MS1 40.95 85 100 45 1 15 1 9 MS1 36.95 81 100 45 1 15 1 9 MS1 82.17 121 150 45 1 15 1 9 MS1 311 235 200 60 1 20 1 12
4 SF-2 return 4 SF-2 return 4 SF-2 return 4 SF-2 return 4 SF-2 return
MS1 128 151 150 45 1 15 1 9 MS1 40.95 85 100 45 1 15 1 9 MS1 36.95 81 100 45 1 15 1 9 MS1 82.17 121 150 45 1 15 1 9 MS1 311 235 200 60 1 20 1 12
5 SF-3 Supply 5 SF-3 Supply 5 SF-3 Supply 5 SF-3 Supply 5 SF-3 Supply
MS1 Cold 48 92 100 45 1 15 1 9 MS1 Cold 26.76 69 80 45 1 15 1 9 MS1 Cold 24.15 66 40 45 1 15 1 9 MS1 Cold 30.68 74 80 45 1 15 1 9 MS1 Cold 174 176 150 60 1 20 1 12
6 SF-3 return 6 SF-3 return 6 SF-3 return 6 SF-3 return 6 SF-3 return
MS1 Cold 48 92 100 45 1 15 1 9 MS1 Cold 26.76 69 80 45 1 15 1 9 MS1 Cold 24.15 66 40 45 1 15 1 9 MS1 Cold 30.68 74 80 45 1 15 1 9 MS1 Cold 174 176 150 60 1 20 1 12
7 SF-4 Supply 7 SF-4 Supply 7 SF-4 Supply 7 SF-4 Supply 7 SF-4 Supply
MS1 Cold 34 77 80 45 1 15 1 9 MS1 Cold 25.17 67 80 45 1 15 1 9 MS1 Cold 22.71 64 80 45 1 15 1 9 MS1 Cold 21.64 62 80 45 1 15 1 9 MS1 Cold 147 162 150 60 1 20 1 12
8 SF-4return 8 SF-4return 8 SF-4return 8 SF-4return 8 SF-4return
MS1 Cold 34 77 80 45 1 15 1 9 MS1 Cold 25.17 67 80 45 1 15 1 9 MS1 Cold 22.71 64 80 45 1 15 1 9 MS1 Cold 21.64 62 80 45 1 15 1 9 MS1 Cold 147 162 150 60 1 20 1 12
9 SF drain 9 SF drain 9 SF drain 9 SF drain 9 SF drain
MS1 Hot/cold 10 42 40 45 1 15 1 9 MS1 Hot/cold 10 42 40 45 1 15 1 9 MS1 Hot/cold 10 42 40 45 1 15 1 9 MS1 Hot/cold 10 42 40 45 1 15 1 9 MS1 Hot/cold 15 52 50 60 1 20 1 12

1 0 1 0 1 0 1 0 Acidic scubber (WPPFRP 80 1 0 1 0 Acidic scubber ( PPFRP 80 1 0 1 0 1 0 1 0


10 Nitrogen 10 Nitrogen 10 Nitrogen 10 Nitrogen 10 Nitrogen
GI 65 39 40 45 1 15 1 9 GI 65 39 40 45 1 15 1 9 GI 65 39 40 45 1 15 1 9 GI 65 39 40 45 1 15 1 9 GI 234 74 80 60 1 20 1 12
11 Instrument air 11 Instrument air 11 Instrument air 11 Instrument air 11 Instrument air
GI 45 33 40 45 1 15 1 9 GI 45 33 40 45 1 15 1 9 GI 45 33 40 45 1 15 1 9 GI 45 33 40 45 1 15 1 9 GI 168 63 80 60 1 20 1 12
12 BA 12 BA 12 BA 12 BA 12 BA
GI 25 24 25 45 1 15 1 9 GI 25 24 25 45 1 15 1 9 GI 25 24 25 45 1 15 1 9 GI 25 24 25 45 1 15 1 9 GI 99 48 50 60 1 20 1 12
13 LTDS 13 96 100 13 LTDS 7 70 80 13 LTDS 7 70 80 13 LTDS 15 103 100 13 LTDS
MSHDPE 45 1 15 1 9 MSHDPE 45 1 15 1 9 MSHDPE 45 1 15 1 9 MSHDPE 45 1 15 1 9 MSHDPE 28 141 150 60 1 20 1 12
14 HTDS 13 96 100 14 HTDS 7 70 80 14 HTDS 7 70 80 14 HTDS 15 103 100 14 HTDS
MSHDPE 45 1 15 1 9 MSHDPE 45 1 15 1 9 MSHDPE 45 1 15 1 9 MSHDPE 45 1 15 1 9 MSHDPE 28 141 150 60 1 20 1 12
15 Spent solvent 15 Spent solvent 15 Spent solvent 15 Spent solvent 15 Spent solvent
SS304 4.8 38 40 45 1 15 1 9 SS304 4.8 38 40 45 1 15 1 9 SS304 4.8 38 40 45 1 15 1 9 SS304 4.8 38 40 45 1 15 1 9 SS304 10 41 50 60 1 20 1 12
16 Spent solvent 16 Spent solvent 16 Spent solvent 16 Spent solvent 16 Spent solvent
SS304 5.9 42 40 45 1 15 1 9 SS304 5.9 42 40 45 1 15 1 9 SS304 5.9 42 40 45 1 15 1 9 SS304 5.9 42 40 45 1 15 1 9 SS304 12 46 50 60 1 20 1 12
17 Spent solvent 17 Spent solvent 17 Spent solvent 17 Spent solvent 17 Spent solvent
SS304 5.5 40 40 45 1 15 1 9 SS304 5.5 40 40 45 1 15 1 9 SS304 5.5 40 40 45 1 15 1 9 SS304 5.5 40 40 45 1 15 1 9 SS304 11 44 50 60 1 20 1 12
18 Spent solvent 18 Spent solvent 18 Spent solvent 18 Spent solvent 18 Spent solvent
SS304 4.5 36 40 45 1 15 1 9 SS304 4.5 36 40 45 1 15 1 9 SS304 4.5 36 40 45 1 15 1 9 SS304 4.5 36 40 45 1 15 1 9 SS304 9 40 50 60 1 20 1 12
19 Spent solvent 19 Spent solvent 19 Spent solvent 19 Spent solvent 19 Spent solvent
SS304 4.8 38 40 45 1 15 1 9 SS304 4.8 38 40 45 1 15 1 9 SS304 4.8 38 40 45 1 15 1 9 SS304 4.8 38 40 45 1 15 1 9 SS304 10 41 50 60 1 20 1 12

CHW SUPPLY MS1 80 45 1 15 1 9 CHW SUPPLY MS1 80 45 1 15 1 9 CHW SUPPLY MS1 80 60 1 20 1 12

CHW RETURN MS1 80 45 1 15 1 9 CHW RETURN MS1 80 45 1 15 1 9 CHW RETURN MS1 80 60 1 20 1 12

HW SUPPLY MS1 40 45 1 15 1 9 HW SUPPLY MS1 40 45 1 15 1 9 HW SUPPLY MS1 40 60 1 20 1 12

HW RETURN MS1 40 45 1 15 1 9 HW RETURN MS1 40 45 1 15 1 9 HW RETURN MS1 40 60 1 20 1 12


Internal Piperack sections @ below 6.0 mlvl

PIPERACK SECTION @ 18-20 GRIDS. PIPERACK SECTION @ 11-13 GRIDS. PIPERACK SECTION @ 09-09' GRIDS. PIPERACK SECTION @ 02-03 GRIDS. PIPERACK SECTION @ C-D GRIDS.

Pipe line size BOQ Pipe line size BOQ Pipe line size Pipe line size
S.no Pipe description Flow required m3/hr S.no Pipe description Flow required m3/hr S.no Pipe description Flow required m3/hr S.no Pipe description Flow required m3/hr S.no Pipe description Flow required m3/hr
Moc Insulation Actual Considered PIPE BEND Flange Blind flange Gaskets Nuts & Bolts Remarks Moc Insulation Actual Considered PIPE BEND Flange Blind flange Gaskets Nuts & Bolts Remarks Moc Insulation Actual Considered PIPE BEND Flange Blind flange Gaskets Nuts & Bolts Remarks Moc Insulation Actual Considered PIPE BEND Flange Blind flange Gaskets Nuts & Bolts Remarks Moc Insulation
1 SF-1 Supply 42 1 SF-1 Supply 42 1 SF-1 Supply 42 1 SF-1 Supply 69 1 SF-1 Supply
MS1 Hot 10.03 80 45 3 15 1 9 MS1 Hot 10.03 50 45 3 15 1 9 MS1 Hot 10.03 50 45 3 15 1 9 MS1 Hot 26.97 100 45 3 15 1 9 MS1 Hot 37.00
2 SF-1 return 42 2 SF-1 return 42 2 SF-1 return 42 2 SF-1 return 69 2 SF-1 return
MS1 Hot 10.03 80 45 3 15 2 9 MS1 Hot 10.03 50 45 3 15 1 9 MS1 Hot 10.03 50 45 3 15 1 9 MS1 Hot 26.97 100 45 3 15 1 9 MS1 Hot 37.00
3 SF-2 Supply 43 3 SF-2 Supply 43 3 SF-2 Supply 43 3 SF-2 Supply 71 3 SF-2 Supply
MS1 10.57 80 45 3 15 3 9 MS1 10.57 50 45 3 15 1 9 MS1 10.57 50 45 3 15 1 9 MS1 28.43 100 45 3 15 1 9 MS1 39.01
4 SF-2 return 43 4 SF-2 return 43 4 SF-2 return 43 4 SF-2 return 71 4 SF-2 return
MS1 10.57 80 45 3 15 4 9 MS1 10.57 50 45 3 15 1 9 MS1 10.57 50 45 3 15 1 9 MS1 28.43 100 45 3 15 1 9 MS1 39.01
5 SF-3 Supply 34 5 SF-3 Supply 34 5 SF-3 Supply 34 5 SF-3 Supply 72 5 SF-3 Supply
MS1 Cold 6.54 80 45 3 15 5 9 MS1 Cold 6.54 50 45 3 15 1 9 MS1 Cold 6.54 50 45 3 15 1 9 MS1 Cold 28.92 80 45 3 15 1 9 MS1 Cold 35.46
6 SF-3 return 34 6 SF-3 return 34 6 SF-3 return 34 6 SF-3 return 72 6 SF-3 return
MS1 Cold 6.54 80 45 3 15 6 9 MS1 Cold 6.54 50 45 3 15 1 9 MS1 Cold 6.54 50 45 3 15 1 9 MS1 Cold 28.92 80 45 3 15 1 9 MS1 Cold 35.46
7 SF drain 7 SF drain 7 SF drain 7 SF drain 7 SF drain
MS1 Hot/cold 10 42 40 45 3 15 7 9 MS1 Hot/cold 10 42 40 45 3 15 1 9 MS1 Hot/cold 10 42 40 45 3 15 1 9 MS1 Hot/cold 10 42 40 45 3 15 1 9 MS1 Hot/cold 10
8 Nitrogen 8 Nitrogen 8 Nitrogen 8 Nitrogen 8 Nitrogen
GI 65 39 25 45 3 15 8 9 GI 65 39 25 45 3 15 1 9 GI 65 39 25 45 3 15 1 9 GI 65 39 25 45 3 15 1 9 GI 90
Nitrogen Nitrogen Nitrogen Nitrogen Nitrogen
GI 25 3 0 9 0 GI 25 3 0 1 0 GI 25 45 3 15 1 9 GI 25 3 0 1 0 GI
9 Instrument air 9 Instrument air 9 Instrument air 9 Instrument air 9 Instrument air
GI 45 33 25 45 3 15 10 9 GI 45 33 25 45 3 15 1 9 GI 45 33 25 45 3 15 1 9 GI 45 33 40 45 3 15 1 9 GI 100
10 BA 10 BA 10 BA 10 BA 10 BA
GI 25 24 25 45 3 15 11 9 GI 25 24 25 45 3 15 1 9 GI 25 24 25 45 3 15 1 9 GI 25 24 25 45 3 15 1 9 GI 50
11 11 11 11 11
MYCHO-FRESH SOL-1 SS304 -- 4.2 35 40 METHANOL SS304 -- 4.2 35 40 Acidic scubber (WING-I) 233 74 80 45 3 15 1 9 Cyclohexane SS304 -- 4.2 35 40 45 3 15 1 9 Cyclohexane SS304 -- 4.2
12 12 12 12 12
Acidic scubber (WING-II) PPFRP 233 74 80 45 3 15 21 9 MYCHO-FRESH SOL-1 SS304 -- 3.8 33 40 Basic scrubber (WING-I) 233 74 80 45 3 15 1 9 ACETONE SS304 -- 3.8 33 40 45 3 15 1 9 ACETONE SS304 -- 3.8
13 13 13 KNOCKOUT VENT 13 13
Basic scrubber (WING-II) PPFRP 233 74 80 45 3 15 22 9 Acidic scubber (WING-II) PPFRP 233 74 80 45 3 15 1 9 MS1 50 45 3 15 1 9 MDC SS304 -- 3.8 33 40 45 3 15 1 9 MDC SS304 -- 3.8
14 KNOCKOUT VENT 14 14 14 14
MS1 200 45 3 15 23 9 Basic scrubber (WING-II) PPFRP 233 74 80 45 3 15 1 9 CA FOR JETMILL GI 40 45 3 15 1 9 DMF SS304 -- 4.5 36 40 45 3 15 1 9 DMF SS304 -- 4.5
15 15 KNOCKOUT VENT 15 15 15
RAW WATER CPVC 40 45 3 15 24 9 MS1 50 45 3 15 1 9 spent METHANOL SS304 -- 3.9 34 40 45 3 15 1 9 ACETIC ACID SS304 -- 4.1 35 40 45 3 15 1 9 ACETIC ACID SS304 -- 4.1
16 16 16 16 16
RO REJECT CPVC 40 45 3 15 25 9 spent METHANOL SS304 -- 3.9 34 40 45 3 15 1 9 METHANOL SS304 -- 3.9 34 40 45 3 15 1 9 METHANOL SS304 -- 3.9
17 17 17 17
RO II REJECT CPVC 40 45 3 15 26 9 17 TOLUENE SS304 -- 3.6 32 40 45 3 15 1 9 TOLUENE SS304 -- 3.6
18 18 18 18
spent Isopropyl alcohol SS304 -- 3.8 33 40 45 3 15 26 9 18 Isopropyl alcohol SS304 -- 3.8 33 40 45 3 15 1 9 Isopropyl alcohol SS304 -- 3.8
19 19 19 19
19 Acidic scubber (WING-I) 233 74 80 45 3 15 1 9 MYCHO-FRESH SOL-1 SS304 -- 4.2
20 20 20 KNOCKOUT VENT
Basic scrubber (WING-I) 233 74 80 45 3 15 1 9 MS1
21 21 KNOCKOUT VENT 21 KNOCKOUT VENT
MS1 200 45 3 15 1 9 MS1
22 KNOCKOUT VENT 22
MS1 80 45 3 15 1 9 CA FOR JETMILL GI
23 23
spent Cyclohexane SS316 -- 4.2 35 40 45 3 15 1 9 RAW WATER CPVC
24 24
spent ACETONE SS304 -- 3.8 33 40 45 3 15 1 9 RO REJECT CPVC
25 25
spent MDC SS304 -- 3.8 33 40 45 3 15 1 9 RO II REJECT CPVC
26 26
spent DMF SS304 -- 4.5 36 40 45 3 15 1 9 Cyclohexane SS316 -- 4.2
27 27
spent ACETIC ACID SS304 -- 4.1 35 40 45 3 15 1 9 ACETONE SS316 -- 3.8
28 28
spent METHANOL SS304 -- 3.9 34 40 45 3 15 1 9 MDC SS316 -- 3.8
29
spent TOLUENE SS304 -- 3.6 32 40 45 3 15 1 9 DMF MSPTFE -- 4.5
30
spent Isopropyl alcohol SS304 -- 3.8 33 40 45 3 15 1 9 ACETIC ACID MSPTFE -- 4.1
31
METHANOL SS316 -- 3.9
32
TOLUENE SS316 -- 3.6
33
Isopropyl alcohol SS316 -- 3.8
34
PIPERACK SECTION @ C-D GRIDS.

Pipe line size BOQ

Actual Considered PIPE BEND Flange Blind flange Gaskets Nuts & Bolts Remarks
81
150 60 3 20 1 12
81
150 60 3 20 1 12
83
150 60 3 20 1 12
83
150 60 3 20 1 12
79
100 60 3 20 1 12
79
100 60 3 20 1 12

42 50 60 3 20 1 12

46 40 60 3 20 1 12

40 3 0 1 0

49 50 60 3 20 1 12

34 40 60 3 20 1 12

35 40 60 3 20 1 12

33 40 60 3 20 1 12

33 40 60 3 20 1 12

36 40 60 3 20 1 12

35 40 60 3 20 1 12

34 40 60 3 20 1 12

32 40 60 3 20 1 12

33 40 60 3 20 1 12

35 40 60 3 20 1 12

200 60 3 20 1 12

200 60 3 20 1 12

40 60 3 20 1 12

40 60 3 20 1 12

40 60 3 20 1 12

40 60 3 20 1 12

35 40 60 3 20 1 12

33 40 60 3 20 1 12

33 40 60 3 20 1 12

36 40 60 3 20 1 12

35 40 60 3 20 1 12

34 40 60 3 20 1 12

32 40 60 3 20 1 12

33 40 60 3 20 1 12
Tabulation for Externa

S.No Service From

10 chilled water (HVAC) supply Central utility

11 chilled water (HVAC) return Central utility

12 Compressed Air Central utility

13 Instrumetn Air Central utility

22 Condensate API utility block

23 CTW [for SF3 / Sf4] API utility block terrace

Summary

300 238
150
50
40
bulation for External Pipe rack sections

Line size
To PIPING MOC
Considered
(IN MM)

API Production Block 150 MS1

API Production Block 150 MS1

API Production Block 40 MS1

API Production Block 50 MS1

boiler house 40 MS1

API utility block chillers 300 MS1

MS1
Type of
insulation
PIPE BEND Flange Blind flange Gaskets
Cold 119 3 13 0 8

Cold 119 3 13 0 8

NA 119 3 13 0 8

NA 119 3 13 0 8

HOT 119 3 13 0 8

NA 119 3 13 0 8
ULD Doc no
Nuts & Bolts
SL.NO TYPE SIZE MOC
RE-604 3KL 1 *PR-B4-241-1005-S4-25 25 SS304
2 *SFD-B4-224-1005-MS1-50-IHC 50 MS1
3 DR:B1-114-1001-S6-15 15 SS-316
4 DR:B1-114-1002-MS1-15 15 MS1
5 DR:B1-114-1003-MS1-15 15 MS1
6 DR:B1-114-1004-MS1-15 15 MS1
7 DR:B1-114-1005-MS1-15 15 MS1
8 DR:B1-114-1006-S6-50 50 SS-316
9 DR:B1-114-1007-MS1-15 15 MS1
10 DR:B1-114-1008-MS1-15 15 MS1
11 DR:B1-114-1009-S6-15 15 SS-316
12 DR:B1-114-1010-S6-15 15 SS-316
13 DR:B1-114-1011-S6-15 15 SS-316
14 DR:B1-114-1012-S6-15 15 SS-316
15 DR:B1-117-1013-S6-15 15 SS-316
16 HTDS-B1-114-1001-HDPE-110-OD 110-OD HDPE
17 LTDS-B1-114-1001-HDPE-110-OD 110-OD HDPE
18 N2-B4-114-1001-S4-25 25 SS-304
19 N2-B4-114-1001A-S4-15 15 SS-304
20 N2-B4-114-1002-S4-15 15 SS-304
21 N2-B4-114-1003-S4-15 15 SS-304
22 N2-B4-114-1004-S4-15 15 SS-304
23 N2-B4-114-1005-S4-15 15 SS-304
24 N2-B4-114-1006-S4-15 15 SS-304
25 N2-B4-114-1007-S4-15 15 SS-304
26 PR:B1-114-1001-S6-40 40 SS-316
27 PR:B1-114-1002-S6-40 40 SS-316
28 PR:B1-114-1003-S6-40 40 SS-316
29 PR:B1-114-1003A-S4-40 40 SS-304
30 PR:B1-114-1004-S6-50 50 SS-316
31 PR:B1-114-1005-S6-50 50 SS-316
32 PR:B1-114-1006-S6-200-IH 200 SS-316
33 PR:B1-114-1007-S6-100 100 SS-316
34 PR:B1-114-1008-S6-40 40 SS-316
35 PR:B1-114-1009-S6-40 40 SS-316
36 PR:B1-114-1010-S6-40 40 SS-316
37 PR:B1-114-1011-S6-40 40 SS-316
38 PR:B1-114-1012-S6-40 40 SS-316
39 PR:B1-114-1013-S6-40 40 SS-316
40 PR:B1-114-1013A-S6-40 40 SS-316
41 PR:B1-114-1014-S6-40 40 SS-316
42 PR:B1-114-1015-S6-25 25 SS-316
43 PR:B1-114-1016-S4-25 25 SS-304
44 PR:B1-114-1017-S4-25 25 SS-304
45 PR:B1-114-1018-S4-25 25 SS-304
46 PR:B1-114-1019-S4-25 25 SS-304
47 PR:B1-114-1020-S4-25 25 SS-304
48 PR:B1-114-1021-S6-50 50 SS-316
49 PR:B1-114-1022-S6-50 50 SS-316
50 PR:B1-114-1023-S6-25 25 SS-316
51 PR:B1-114-1023A-S6-50 50 SS-316
52 PR:B1-114-1024-S6-40 40 SS-316
53 SF1R:B1-114-1001-MS1-80-IH 80 MS1
54 SF1S:B1-114-1001-MS1-80-IH 80 MS1
55 SF2R:B1-114-1001-MS1-80 80 MS1
56 SF2R:B1-114-1002-MS1-80 80 MS1
57 SF2S:B1-114-1001-MS1-80 80 MS1
58 SF2S:B1-114-1002-MS1-80 80 MS1
59 SF3R:B1-114-1001-MS1-50-IC 50 MS1
60 SF3R:B1-114-1002-MS1-80-IC 80 MS1
61 SF3R:B1-114-1003-MS1-25-IC 25 MS1
62 SF3S:B1-114-1001-MS1-50-IC 50 MS1
63 SF3S:B1-114-1002-MS1-80-IC 80 MS1
64 SF3S:B1-114-1003-MS1-25-IC 25 MS1
65 SF4R:B1-114-1001-MS1-40-IC 40 MS1
66 SF4R:B1-114-1002-MS1-25-IC 25 MS1
67 SF4S:B1-114-1001-MS1-40-IC 40 MS1
68 SF4S:B1-114-1002-MS1-25-IC 25 MS1
69 SFR-B1-114-1001-MS1-80-IHC 80 MS1
70 SFR-B1-114-1002-MS1-80-IHC 80 MS1
71 SFR-B1-114-1003-MS2-80-IHC 80 MS2
72 SFS-B1-114-1001-MS2-80-IHC 80 MS2
73 SFS-B1-114-1002-MS1-80-IHC 80 MS1
74 SFS-B1-114-1003-MS1-80-IHC 80 MS1
75 SFS-B1-114-1004-MS1-80-IHC 80 MS1
76 SFS-B1-114-1005-MS1-80-IHC 80 MS1
77 VAC.-B4-114-1001-S6-15 15 SS-316
78 VAC.-B4-114-1002-S6-40 40 SS-316
79 VAC.-B4-114-1003-S6-40 40 SS-316
80 VAC.-B4-114-1007-S6-25 25 SS-316
81 VAC.-B4-114-1008-S6-25 25 SS-316
82 VT-B1-114-1002A-MS1-15 15 MS1
83 VT-B4-114-1001-MS1-15 15 MS1
84 VT-B4-114-1001A-S6-15 15 SS-316
85 VT-B4-114-1002-MS1-50 50 MS1
86 VT-B4-114-1003-MS1-15 15 MS1
87 VT-B4-114-1003A-S4-40 40 SS-304
88 VT-B4-114-1004-MS1-15 15 MS1
89 VT-B4-114-1004A-S6-40 40 SS-316
90 VT-B4-114-1004B-S6-40 40 SS-316
RE-604 3KL 1 *PR-B4-241-1005-S4-25 25 SS304
2 *SFD-B4-224-1005-MS1-50-IHC 50 MS1
3 DR:B1-114-1001-S6-15 15 SS-316
4 DR:B1-114-1002-MS1-15 15 MS1
5 DR:B1-114-1003-MS1-15 15 MS1
6 DR:B1-114-1004-MS1-15 15 MS1
7 DR:B1-114-1005-MS1-15 15 MS1
8 DR:B1-114-1006-S6-50 50 SS-316
9 DR:B1-114-1007-MS1-15 15 MS1
10 DR:B1-114-1008-MS1-15 15 MS1
11 DR:B1-114-1009-S6-15 15 SS-316
12 DR:B1-114-1010-S6-15 15 SS-316
13 DR:B1-114-1011-S6-15 15 SS-316
14 DR:B1-114-1012-S6-15 15 SS-316
15 DR:B1-117-1013-S6-15 15 SS-316
16 HTDS-B1-114-1001-HDPE-110-OD 110-OD HDPE
17 LTDS-B1-114-1001-HDPE-110-OD 110-OD HDPE
18 N2-B4-114-1001-S4-25 25 SS-304
19 N2-B4-114-1001A-S4-15 15 SS-304
20 N2-B4-114-1002-S4-15 15 SS-304
21 N2-B4-114-1003-S4-15 15 SS-304
22 N2-B4-114-1004-S4-15 15 SS-304
23 N2-B4-114-1005-S4-15 15 SS-304
24 N2-B4-114-1006-S4-15 15 SS-304
25 N2-B4-114-1007-S4-15 15 SS-304
26 PR:B1-114-1001-S6-40 40 SS-316
27 PR:B1-114-1002-S6-40 40 SS-316
28 PR:B1-114-1003-S6-40 40 SS-316
29 PR:B1-114-1003A-S4-40 40 SS-304
30 PR:B1-114-1004-S6-50 50 SS-316
31 PR:B1-114-1005-S6-50 50 SS-316
32 PR:B1-114-1006-S6-200-IH 200 SS-316
33 PR:B1-114-1007-S6-100 100 SS-316
34 PR:B1-114-1008-S6-40 40 SS-316
35 PR:B1-114-1009-S6-40 40 SS-316
36 PR:B1-114-1010-S6-40 40 SS-316
37 PR:B1-114-1011-S6-40 40 SS-316
38 PR:B1-114-1012-S6-40 40 SS-316
39 PR:B1-114-1013-S6-40 40 SS-316
40 PR:B1-114-1013A-S6-40 40 SS-316
41 PR:B1-114-1014-S6-40 40 SS-316
42 PR:B1-114-1015-S6-25 25 SS-316
43 PR:B1-114-1016-S4-25 25 SS-304
44 PR:B1-114-1017-S4-25 25 SS-304
45 PR:B1-114-1018-S4-25 25 SS-304
46 PR:B1-114-1019-S4-25 25 SS-304
47 PR:B1-114-1020-S4-25 25 SS-304
48 PR:B1-114-1021-S6-50 50 SS-316
49 PR:B1-114-1022-S6-50 50 SS-316
50 PR:B1-114-1023-S6-25 25 SS-316
51 PR:B1-114-1023A-S6-50 50 SS-316
52 PR:B1-114-1024-S6-40 40 SS-316
53 SF1R:B1-114-1001-MS1-80-IH 80 MS1
54 SF1S:B1-114-1001-MS1-80-IH 80 MS1
55 SF2R:B1-114-1001-MS1-80 80 MS1
56 SF2R:B1-114-1002-MS1-80 80 MS1
57 SF2S:B1-114-1001-MS1-80 80 MS1
58 SF2S:B1-114-1002-MS1-80 80 MS1
59 SF3R:B1-114-1001-MS1-50-IC 50 MS1
60 SF3R:B1-114-1002-MS1-80-IC 80 MS1
61 SF3R:B1-114-1003-MS1-25-IC 25 MS1
62 SF3S:B1-114-1001-MS1-50-IC 50 MS1
63 SF3S:B1-114-1002-MS1-80-IC 80 MS1
64 SF3S:B1-114-1003-MS1-25-IC 25 MS1
65 SF4R:B1-114-1001-MS1-40-IC 40 MS1
66 SF4R:B1-114-1002-MS1-25-IC 25 MS1
67 SF4S:B1-114-1001-MS1-40-IC 40 MS1
68 SF4S:B1-114-1002-MS1-25-IC 25 MS1
69 SFR-B1-114-1001-MS1-80-IHC 80 MS1
70 SFR-B1-114-1002-MS1-80-IHC 80 MS1
71 SFR-B1-114-1003-MS2-80-IHC 80 MS2
72 SFS-B1-114-1001-MS2-80-IHC 80 MS2
73 SFS-B1-114-1002-MS1-80-IHC 80 MS1
74 SFS-B1-114-1003-MS1-80-IHC 80 MS1
75 SFS-B1-114-1004-MS1-80-IHC 80 MS1
76 SFS-B1-114-1005-MS1-80-IHC 80 MS1
77 VAC.-B4-114-1001-S6-15 15 SS-316
78 VAC.-B4-114-1002-S6-40 40 SS-316
79 VAC.-B4-114-1003-S6-40 40 SS-316
80 VAC.-B4-114-1007-S6-25 25 SS-316
81 VAC.-B4-114-1008-S6-25 25 SS-316
82 VT-B1-114-1002A-MS1-15 15 MS1
83 VT-B4-114-1001-MS1-15 15 MS1
84 VT-B4-114-1001A-S6-15 15 SS-316
85 VT-B4-114-1002-MS1-50 50 MS1
86 VT-B4-114-1003-MS1-15 15 MS1
87 VT-B4-114-1003A-S4-40 40 SS-304
88 VT-B4-114-1004-MS1-15 15 MS1
89 VT-B4-114-1004A-S6-40 40 SS-316
90 VT-B4-114-1004B-S6-40 40 SS-316
RE-606 4.5KL * PR:B1-104-1022-S4-50 50 SS-304
* PR:B1-105-1023-S4-50 50 SS-304
* PR:B1-106-1029-S4-40 40 SS-304
* PR:B1-106-1030-S4-40 40 SS-304
* PR:B1-106-1031-S4-40 40 SS-304
* PR:B1-107-1012-S6-40 40 SS-316
CA-B4-106-1001-MS1-15 15 MS1
DR:B1-106-1001-MS1-15 15 MS1
DR:B1-106-1002-MS1-15 15 MS1
DR:B1-106-1003-S6-40 40 SS-316
DR:B1-106-1004-S6-40 40 SS-316
DR:B1-106-1005-S6-15 15 SS-316
DR:B1-106-1006-MSTL-25 25 MSTL
DR:B1-106-1007-MSTL-40 40 MSTL
DR:B1-106-1008-MS1-15 15 MS1
DR:B1-106-1009-MS1-15 15 MS1
DR:B1-106-1010-S6-15 15 SS-316
DR:B1-106-1011-S6-15 15 SS-316
DR:B1-106-1012-S6-15 15 SS-316
DR:B1-106-1013-S6-40 40 SS-316
DR:B1-106-1014-S6-50 50 SS-316
HTDS-B1-106-1001-HDPE-- 110-OD HDPE
LTDS-B1-106-1001-HDPE-- 110-OD HDPE
N2-B1-106-1001-S4-25 25 SS-304
N2-B1-106-1001A-S4-15 15 SS-304
N2-B1-106-1002-S4-15 15 SS-304
N2-B1-106-1002A-S4-15 15 SS-304
N2-B1-106-1005-S4-15 15 SS-304
N2-B1-106-1006-S4-15 15 SS-304
N2-B1-106-1007-S4-15 15 SS-304
N2:B1-106-1003-S4-15 15 SS 304
N2:B1-106-1004-S4-15 15 SS 304
PR:B1-106-1001-S4-40 40 SS-316
PR:B1-106-1002-S6-40 40 SS-316
PR:B1-106-1003-S4-25 25 S4
PR:B1-106-1004-S6-40 40 SS-316
PR:B1-106-1005-S6-50 50 SS-316
PR:B1-106-1006-MSTL-40 40 MSTL
PR:B1-106-1007-S6-40 40 SS-316
PR:B1-106-1008-S6-50 50 SS-316
PR:B1-106-1009-S4-40 40 SS-304
PR:B1-106-1010-S4-25 25 SS-304
PR:B1-106-1011-S4-25 25 SS-316
PR:B1-106-1012-S6-50 50 SS-316
PR:B1-106-1013-S6-50 50 SS-316
PR:B1-106-1014-S6-25 25 SS-316
PR:B1-106-1015-S6-250-IH 250 SS-316
PR:B1-106-1016-S6-150 150 SS-316
PR:B1-106-1017-S6-40 40 SS-316
PR:B1-106-1018-S6-40 40 SS-316
PR:B1-106-1019-S6-40 40 SS-316
PR:B1-106-1020-S6-40 40 SS-316
PR:B1-106-1021-S6-40 40 SS-316
PR:B1-106-1022-S4-25 25 SS 316
PR:B1-106-1022A-S6-25 25 SS 316
PR:B1-106-1023-S6-50 80 SS 316
PR:B1-106-1024-S6-50 50 SS-316
PR:B1-106-1025-S6-50 80 S6
PR:B1-106-1026-S6-50 50 SS-316
PR:B1-106-1027-S6-50 50 SS-316
PR:B1-106-1032-S4-40 40 SS-304
PR:B1-106-1033-S4-25 25 S4
PW-B1-106-1001-S7E-25 25 SS-316L
PW-B1-106-1002-S7E-25 25 SS-316L
SF-B1-106-1001-MS2-100-IHC 100 MS2
SF-B1-106-1002-MS1-80-IHC 80 MS1
SF-B1-106-1003-MS1-80-IHC 80 MS1
SF-B1-106-1004-MS1-100-IHC 100 MS1
SF-B1-106-1005-MS1-100-IHC 100 MS1
SF-B1-106-1006-MS1-100-IHC 100 MS1
SF-B1-106-1007-MS1-100-IHC 100 MS1
SF-B1-106-1008-MS1-100-IHC 100 MS1
SF-B1-106-1009-MS1-100-IHC 100 MS1
SF-B1-106-1010-MS1-100-IHC 100 MS1
SF-B1-106-1011-MS1-100-IHC 100 MS1
SF-B1-106-1012-MS2-100-IHC 100 MS2
SF1:B1-106-1001-MS1-80-IH 80 MS1
SF1:B1-106-1002-MS1-80-IH 80 MS1
SF2:B1-106-1001-MS1-80 80 MS1
SF2:B1-106-1002-MS1-80 80 MS1
SF2:B1-106-1003-MS1-80 80 MS1
SF2:B1-106-1004-MS1-80 80 MS1
SF3:B1-106-1001-MS1-80-IC 80 MS1
SF3:B1-106-1002-MS1-80-IC 80 MS1
SF3:B1-106-1003-MS1-80-IC 80 MS1
SF3:B1-106-1004-MS1-80-IC 80 MS1
SF3:B1-106-1005-MS1-25-IC 25 MS1
SF3:B1-106-1006-MS1-25-IC 25 MS1
SF3:B1-106-1007-MS1-25-IC 25 MS1
SF3:B1-106-1008-MS1-25-IC 25 MS1
SF4:B1-106-1001-MS1-40-IC 40 MS1
SF4:B1-106-1002-MS1-40-IC 40 MS1
SF4:B1-106-1003-MS1-25-IC 25 MS1
SF4:B1-106-1004-MS1-25-IC 25 MS1
VAC-B1-106-1001-S6-50 50 SS-316
VAC-B1-106-1001A-MSTL-40 40 MSTL
VAC-B1-106-1001B-S6-40 40 SS-316
VAC-B1-106-1002-S6-15 15 SS-316
VAC-B1-106-1003-S6-40 40 SS-316
VAC-B1-106-1003A-S6-40 40 SS-316
VAC-B1-106-1004-S6-25 25 SS-316
VAC-B1-106-1006-S6-40 40 SS-316
VAC-B1-106-1007-S6-50 50 SS-316
VT-B1-106-1001-MS1-40 40 MS1
VT-B1-106-1001A-S6-15 15 SS316
VT-B1-106-1002-MS1-15 15 MS1
VT-B1-106-1003-MS1-15 15 MS1
VT-B1-106-1004-S6-50 50 SS-316
VT-B1-106-1004A-S6-50 50 SS-316
VT-B1-106-1005-MS1-80 80 MS1
VT-B1-106-1006-MS1-15 15 MS1
VT-B1-106-1010-MS1-15 15 MS1
VT-B1-106-1011-MS1-15 15 MS1
VT:B1-106-1007-PP/FRP-40 40 PP/FRP
VT:B1-106-1008-PP/FRP-25 25 PP/FRP
VT:B1-106-1009-PP/FRP-40 40 PP/FRP
RE-607 4.5KL * PR:B1-104-1022-S4-50 50 SS-304
* PR:B1-105-1023-S4-50 50 SS-304
* PR:B1-106-1029-S4-40 40 SS-304
* PR:B1-106-1030-S4-40 40 SS-304
* PR:B1-106-1031-S4-40 40 SS-304
* PR:B1-107-1012-S6-40 40 SS-316
CA-B4-106-1001-MS1-15 15 MS1
DR:B1-106-1001-MS1-15 15 MS1
DR:B1-106-1002-MS1-15 15 MS1
DR:B1-106-1003-S6-40 40 SS-316
DR:B1-106-1004-S6-40 40 SS-316
DR:B1-106-1005-S6-15 15 SS-316
DR:B1-106-1006-MSTL-25 25 MSTL
DR:B1-106-1007-MSTL-40 40 MSTL
DR:B1-106-1008-MS1-15 15 MS1
DR:B1-106-1009-MS1-15 15 MS1
DR:B1-106-1010-S6-15 15 SS-316
DR:B1-106-1011-S6-15 15 SS-316
DR:B1-106-1012-S6-15 15 SS-316
DR:B1-106-1013-S6-40 40 SS-316
DR:B1-106-1014-S6-50 50 SS-316
HTDS-B1-106-1001-HDPE-- 110-OD HDPE
LTDS-B1-106-1001-HDPE-- 110-OD HDPE
N2-B1-106-1001-S4-25 25 SS-304
N2-B1-106-1001A-S4-15 15 SS-304
N2-B1-106-1002-S4-15 15 SS-304
N2-B1-106-1002A-S4-15 15 SS-304
N2-B1-106-1005-S4-15 15 SS-304
N2-B1-106-1006-S4-15 15 SS-304
N2-B1-106-1007-S4-15 15 SS-304
N2:B1-106-1003-S4-15 15 SS 304
N2:B1-106-1004-S4-15 15 SS 304
PR:B1-106-1001-S4-40 40 SS-316
PR:B1-106-1002-S6-40 40 SS-316
PR:B1-106-1003-S4-25 25 S4
PR:B1-106-1004-S6-40 40 SS-316
PR:B1-106-1005-S6-50 50 SS-316
PR:B1-106-1006-MSTL-40 40 MSTL
PR:B1-106-1007-S6-40 40 SS-316
PR:B1-106-1008-S6-50 50 SS-316
PR:B1-106-1009-S4-40 40 SS-304
PR:B1-106-1010-S4-25 25 SS-304
PR:B1-106-1011-S4-25 25 SS-316
PR:B1-106-1012-S6-50 50 SS-316
PR:B1-106-1013-S6-50 50 SS-316
PR:B1-106-1014-S6-25 25 SS-316
PR:B1-106-1015-S6-250-IH 250 SS-316
PR:B1-106-1016-S6-150 150 SS-316
PR:B1-106-1017-S6-40 40 SS-316
PR:B1-106-1018-S6-40 40 SS-316
PR:B1-106-1019-S6-40 40 SS-316
PR:B1-106-1020-S6-40 40 SS-316
PR:B1-106-1021-S6-40 40 SS-316
PR:B1-106-1022-S4-25 25 SS 316
PR:B1-106-1022A-S6-25 25 SS 316
PR:B1-106-1023-S6-50 80 SS 316
PR:B1-106-1024-S6-50 50 SS-316
PR:B1-106-1025-S6-50 80 S6
PR:B1-106-1026-S6-50 50 SS-316
PR:B1-106-1027-S6-50 50 SS-316
PR:B1-106-1032-S4-40 40 SS-304
PR:B1-106-1033-S4-25 25 S4
PW-B1-106-1001-S7E-25 25 SS-316L
PW-B1-106-1002-S7E-25 25 SS-316L
SF-B1-106-1001-MS2-100-IHC 100 MS2
SF-B1-106-1002-MS1-80-IHC 80 MS1
SF-B1-106-1003-MS1-80-IHC 80 MS1
SF-B1-106-1004-MS1-100-IHC 100 MS1
SF-B1-106-1005-MS1-100-IHC 100 MS1
SF-B1-106-1006-MS1-100-IHC 100 MS1
SF-B1-106-1007-MS1-100-IHC 100 MS1
SF-B1-106-1008-MS1-100-IHC 100 MS1
SF-B1-106-1009-MS1-100-IHC 100 MS1
SF-B1-106-1010-MS1-100-IHC 100 MS1
SF-B1-106-1011-MS1-100-IHC 100 MS1
SF-B1-106-1012-MS2-100-IHC 100 MS2
SF1:B1-106-1001-MS1-80-IH 80 MS1
SF1:B1-106-1002-MS1-80-IH 80 MS1
SF2:B1-106-1001-MS1-80 80 MS1
SF2:B1-106-1002-MS1-80 80 MS1
SF2:B1-106-1003-MS1-80 80 MS1
SF2:B1-106-1004-MS1-80 80 MS1
SF3:B1-106-1001-MS1-80-IC 80 MS1
SF3:B1-106-1002-MS1-80-IC 80 MS1
SF3:B1-106-1003-MS1-80-IC 80 MS1
SF3:B1-106-1004-MS1-80-IC 80 MS1
SF3:B1-106-1005-MS1-25-IC 25 MS1
SF3:B1-106-1006-MS1-25-IC 25 MS1
SF3:B1-106-1007-MS1-25-IC 25 MS1
SF3:B1-106-1008-MS1-25-IC 25 MS1
SF4:B1-106-1001-MS1-40-IC 40 MS1
SF4:B1-106-1002-MS1-40-IC 40 MS1
SF4:B1-106-1003-MS1-25-IC 25 MS1
SF4:B1-106-1004-MS1-25-IC 25 MS1
VAC-B1-106-1001-S6-50 50 SS-316
VAC-B1-106-1001A-MSTL-40 40 MSTL
VAC-B1-106-1001B-S6-40 40 SS-316
VAC-B1-106-1002-S6-15 15 SS-316
VAC-B1-106-1003-S6-40 40 SS-316
VAC-B1-106-1003A-S6-40 40 SS-316
VAC-B1-106-1004-S6-25 25 SS-316
VAC-B1-106-1006-S6-40 40 SS-316
VAC-B1-106-1007-S6-50 50 SS-316
VT-B1-106-1001-MS1-40 40 MS1
VT-B1-106-1001A-S6-15 15 SS316
VT-B1-106-1002-MS1-15 15 MS1
VT-B1-106-1003-MS1-15 15 MS1
VT-B1-106-1004-S6-50 50 SS-316
VT-B1-106-1004A-S6-50 50 SS-316
VT-B1-106-1005-MS1-80 80 MS1
VT-B1-106-1006-MS1-15 15 MS1
VT-B1-106-1010-MS1-15 15 MS1
VT-B1-106-1011-MS1-15 15 MS1
VT:B1-106-1007-PP/FRP-40 40 PP/FRP
VT:B1-106-1008-PP/FRP-25 25 PP/FRP
VT:B1-106-1009-PP/FRP-40 40 PP/FRP
RE-610 4KL * PR:B1-104-1022-S4-50 50 SS-304
* PR:B1-105-1023-S4-50 50 SS-304
* PR:B1-106-1029-S4-40 40 SS-304
* PR:B1-106-1030-S4-40 40 SS-304
* PR:B1-106-1031-S4-40 40 SS-304
* PR:B1-107-1012-S6-40 40 SS-316
CA-B4-106-1001-MS1-15 15 MS1
DR:B1-106-1001-MS1-15 15 MS1
DR:B1-106-1002-MS1-15 15 MS1
DR:B1-106-1003-S6-40 40 SS-316
DR:B1-106-1004-S6-40 40 SS-316
DR:B1-106-1005-S6-15 15 SS-316
DR:B1-106-1006-MSTL-25 25 MSTL
DR:B1-106-1007-MSTL-40 40 MSTL
DR:B1-106-1008-MS1-15 15 MS1
DR:B1-106-1009-MS1-15 15 MS1
DR:B1-106-1010-S6-15 15 SS-316
DR:B1-106-1011-S6-15 15 SS-316
DR:B1-106-1012-S6-15 15 SS-316
DR:B1-106-1013-S6-40 40 SS-316
DR:B1-106-1014-S6-50 50 SS-316
HTDS-B1-106-1001-HDPE-- 110-OD HDPE
LTDS-B1-106-1001-HDPE-- 110-OD HDPE
N2-B1-106-1001-S4-25 25 SS-304
N2-B1-106-1001A-S4-15 15 SS-304
N2-B1-106-1002-S4-15 15 SS-304
N2-B1-106-1002A-S4-15 15 SS-304
N2-B1-106-1005-S4-15 15 SS-304
N2-B1-106-1006-S4-15 15 SS-304
N2-B1-106-1007-S4-15 15 SS-304
N2:B1-106-1003-S4-15 15 SS 304
N2:B1-106-1004-S4-15 15 SS 304
PR:B1-106-1001-S4-40 40 SS-316
PR:B1-106-1002-S6-40 40 SS-316
PR:B1-106-1003-S4-25 25 S4
PR:B1-106-1004-S6-40 40 SS-316
PR:B1-106-1005-S6-50 50 SS-316
PR:B1-106-1006-MSTL-40 40 MSTL
PR:B1-106-1007-S6-40 40 SS-316
PR:B1-106-1008-S6-50 50 SS-316
PR:B1-106-1009-S4-40 40 SS-304
PR:B1-106-1010-S4-25 25 SS-304
PR:B1-106-1011-S4-25 25 SS-316
PR:B1-106-1012-S6-50 50 SS-316
PR:B1-106-1013-S6-50 50 SS-316
PR:B1-106-1014-S6-25 25 SS-316
PR:B1-106-1015-S6-250-IH 250 SS-316
PR:B1-106-1016-S6-150 150 SS-316
PR:B1-106-1017-S6-40 40 SS-316
PR:B1-106-1018-S6-40 40 SS-316
PR:B1-106-1019-S6-40 40 SS-316
PR:B1-106-1020-S6-40 40 SS-316
PR:B1-106-1021-S6-40 40 SS-316
PR:B1-106-1022-S4-25 25 SS 316
PR:B1-106-1022A-S6-25 25 SS 316
PR:B1-106-1023-S6-50 80 SS 316
PR:B1-106-1024-S6-50 50 SS-316
PR:B1-106-1025-S6-50 80 S6
PR:B1-106-1026-S6-50 50 SS-316
PR:B1-106-1027-S6-50 50 SS-316
PR:B1-106-1032-S4-40 40 SS-304
PR:B1-106-1033-S4-25 25 S4
PW-B1-106-1001-S7E-25 25 SS-316L
PW-B1-106-1002-S7E-25 25 SS-316L
SF-B1-106-1001-MS2-100-IHC 100 MS2
SF-B1-106-1002-MS1-80-IHC 80 MS1
SF-B1-106-1003-MS1-80-IHC 80 MS1
SF-B1-106-1004-MS1-100-IHC 100 MS1
SF-B1-106-1005-MS1-100-IHC 100 MS1
SF-B1-106-1006-MS1-100-IHC 100 MS1
SF-B1-106-1007-MS1-100-IHC 100 MS1
SF-B1-106-1008-MS1-100-IHC 100 MS1
SF-B1-106-1009-MS1-100-IHC 100 MS1
SF-B1-106-1010-MS1-100-IHC 100 MS1
SF-B1-106-1011-MS1-100-IHC 100 MS1
SF-B1-106-1012-MS2-100-IHC 100 MS2
SF1:B1-106-1001-MS1-80-IH 80 MS1
SF1:B1-106-1002-MS1-80-IH 80 MS1
SF2:B1-106-1001-MS1-80 80 MS1
SF2:B1-106-1002-MS1-80 80 MS1
SF2:B1-106-1003-MS1-80 80 MS1
SF2:B1-106-1004-MS1-80 80 MS1
SF3:B1-106-1001-MS1-80-IC 80 MS1
SF3:B1-106-1002-MS1-80-IC 80 MS1
SF3:B1-106-1003-MS1-80-IC 80 MS1
SF3:B1-106-1004-MS1-80-IC 80 MS1
SF3:B1-106-1005-MS1-25-IC 25 MS1
SF3:B1-106-1006-MS1-25-IC 25 MS1
SF3:B1-106-1007-MS1-25-IC 25 MS1
SF3:B1-106-1008-MS1-25-IC 25 MS1
SF4:B1-106-1001-MS1-40-IC 40 MS1
SF4:B1-106-1002-MS1-40-IC 40 MS1
SF4:B1-106-1003-MS1-25-IC 25 MS1
SF4:B1-106-1004-MS1-25-IC 25 MS1
VAC-B1-106-1001-S6-50 50 SS-316
VAC-B1-106-1001A-MSTL-40 40 MSTL
VAC-B1-106-1001B-S6-40 40 SS-316
VAC-B1-106-1002-S6-15 15 SS-316
VAC-B1-106-1003-S6-40 40 SS-316
VAC-B1-106-1003A-S6-40 40 SS-316
VAC-B1-106-1004-S6-25 25 SS-316
VAC-B1-106-1006-S6-40 40 SS-316
VAC-B1-106-1007-S6-50 50 SS-316
VT-B1-106-1001-MS1-40 40 MS1
VT-B1-106-1001A-S6-15 15 SS316
VT-B1-106-1002-MS1-15 15 MS1
VT-B1-106-1003-MS1-15 15 MS1
VT-B1-106-1004-S6-50 50 SS-316
VT-B1-106-1004A-S6-50 50 SS-316
VT-B1-106-1005-MS1-80 80 MS1
VT-B1-106-1006-MS1-15 15 MS1
VT-B1-106-1010-MS1-15 15 MS1
VT-B1-106-1011-MS1-15 15 MS1
VT:B1-106-1007-PP/FRP-40 40 PP/FRP
VT:B1-106-1008-PP/FRP-25 25 PP/FRP
VT:B1-106-1009-PP/FRP-40 40 PP/FRP
RE-613 2KL 1 *PR-B4-241-1005-S4-25 25 SS304
2 *SFD-B4-224-1005-MS1-50-IHC 50 MS1
3 DR:B1-114-1001-S6-15 15 SS-316
4 DR:B1-114-1002-MS1-15 15 MS1
5 DR:B1-114-1003-MS1-15 15 MS1
6 DR:B1-114-1004-MS1-15 15 MS1
7 DR:B1-114-1005-MS1-15 15 MS1
8 DR:B1-114-1006-S6-50 50 SS-316
9 DR:B1-114-1007-MS1-15 15 MS1
10 DR:B1-114-1008-MS1-15 15 MS1
11 DR:B1-114-1009-S6-15 15 SS-316
12 DR:B1-114-1010-S6-15 15 SS-316
13 DR:B1-114-1011-S6-15 15 SS-316
14 DR:B1-114-1012-S6-15 15 SS-316
15 DR:B1-117-1013-S6-15 15 SS-316
16 HTDS-B1-114-1001-HDPE-110-OD 110-OD HDPE
17 LTDS-B1-114-1001-HDPE-110-OD 110-OD HDPE
18 N2-B4-114-1001-S4-25 25 SS-304
19 N2-B4-114-1001A-S4-15 15 SS-304
20 N2-B4-114-1002-S4-15 15 SS-304
21 N2-B4-114-1003-S4-15 15 SS-304
22 N2-B4-114-1004-S4-15 15 SS-304
23 N2-B4-114-1005-S4-15 15 SS-304
24 N2-B4-114-1006-S4-15 15 SS-304
25 N2-B4-114-1007-S4-15 15 SS-304
26 PR:B1-114-1001-S6-40 40 SS-316
27 PR:B1-114-1002-S6-40 40 SS-316
28 PR:B1-114-1003-S6-40 40 SS-316
29 PR:B1-114-1003A-S4-40 40 SS-304
30 PR:B1-114-1004-S6-50 50 SS-316
31 PR:B1-114-1005-S6-50 50 SS-316
32 PR:B1-114-1006-S6-200-IH 200 SS-316
33 PR:B1-114-1007-S6-100 100 SS-316
34 PR:B1-114-1008-S6-40 40 SS-316
35 PR:B1-114-1009-S6-40 40 SS-316
36 PR:B1-114-1010-S6-40 40 SS-316
37 PR:B1-114-1011-S6-40 40 SS-316
38 PR:B1-114-1012-S6-40 40 SS-316
39 PR:B1-114-1013-S6-40 40 SS-316
40 PR:B1-114-1013A-S6-40 40 SS-316
41 PR:B1-114-1014-S6-40 40 SS-316
42 PR:B1-114-1015-S6-25 25 SS-316
43 PR:B1-114-1016-S4-25 25 SS-304
44 PR:B1-114-1017-S4-25 25 SS-304
45 PR:B1-114-1018-S4-25 25 SS-304
46 PR:B1-114-1019-S4-25 25 SS-304
47 PR:B1-114-1020-S4-25 25 SS-304
48 PR:B1-114-1021-S6-50 50 SS-316
49 PR:B1-114-1022-S6-50 50 SS-316
50 PR:B1-114-1023-S6-25 25 SS-316
51 PR:B1-114-1023A-S6-50 50 SS-316
52 PR:B1-114-1024-S6-40 40 SS-316
53 SF1R:B1-114-1001-MS1-80-IH 80 MS1
54 SF1S:B1-114-1001-MS1-80-IH 80 MS1
55 SF2R:B1-114-1001-MS1-80 80 MS1
56 SF2R:B1-114-1002-MS1-80 80 MS1
57 SF2S:B1-114-1001-MS1-80 80 MS1
58 SF2S:B1-114-1002-MS1-80 80 MS1
59 SF3R:B1-114-1001-MS1-50-IC 50 MS1
60 SF3R:B1-114-1002-MS1-80-IC 80 MS1
61 SF3R:B1-114-1003-MS1-25-IC 25 MS1
62 SF3S:B1-114-1001-MS1-50-IC 50 MS1
63 SF3S:B1-114-1002-MS1-80-IC 80 MS1
64 SF3S:B1-114-1003-MS1-25-IC 25 MS1
65 SF4R:B1-114-1001-MS1-40-IC 40 MS1
66 SF4R:B1-114-1002-MS1-25-IC 25 MS1
67 SF4S:B1-114-1001-MS1-40-IC 40 MS1
68 SF4S:B1-114-1002-MS1-25-IC 25 MS1
69 SFR-B1-114-1001-MS1-80-IHC 80 MS1
70 SFR-B1-114-1002-MS1-80-IHC 80 MS1
71 SFR-B1-114-1003-MS2-80-IHC 80 MS2
72 SFS-B1-114-1001-MS2-80-IHC 80 MS2
73 SFS-B1-114-1002-MS1-80-IHC 80 MS1
74 SFS-B1-114-1003-MS1-80-IHC 80 MS1
75 SFS-B1-114-1004-MS1-80-IHC 80 MS1
76 SFS-B1-114-1005-MS1-80-IHC 80 MS1
77 VAC.-B4-114-1001-S6-15 15 SS-316
78 VAC.-B4-114-1002-S6-40 40 SS-316
79 VAC.-B4-114-1003-S6-40 40 SS-316
80 VAC.-B4-114-1007-S6-25 25 SS-316
81 VAC.-B4-114-1008-S6-25 25 SS-316
82 VT-B1-114-1002A-MS1-15 15 MS1
83 VT-B4-114-1001-MS1-15 15 MS1
84 VT-B4-114-1001A-S6-15 15 SS-316
85 VT-B4-114-1002-MS1-50 50 MS1
86 VT-B4-114-1003-MS1-15 15 MS1
87 VT-B4-114-1003A-S4-40 40 SS-304
88 VT-B4-114-1004-MS1-15 15 MS1
89 VT-B4-114-1004A-S6-40 40 SS-316
90 VT-B4-114-1004B-S6-40 40 SS-316
RE-616 7KL * PR:B1-107-1001-S4-25 25 SS-316
* PR:B1-107-1002-S4-25 25 SS-316
DR:B1-107-1001-MS1-15 15 MS1
DR:B1-107-1002-MS1-15 15 MS1
DR:B1-107-1003-MS1-15 15 MS1
DR:B1-107-1004-MS1-15 15 MS1
DR:B1-107-1005-S6-50 50 SS-316
DR:B1-107-1006-MS1-15 15 MS1
DR:B1-107-1007-MS1-15 15 MS1
DR:B1-107-1008-S6-15 15 SS-316
DR:B1-107-1009-S6-15 15 SS-316
DR:B1-107-1013-S6-15 15 SS-316
DR:B1-108-1010-S6-25 25 MSTL
DR:B1-108-1011-S6-15 15 MSTL
HTDS-B1-107-1001-HDPE-- 110-OD HDPE
LTDS-B1-107-1001-HDPE-- 110-OD HDPE
N2-B1-107-1001-S4-25 25 SS-304
N2-B1-107-1001A-S4-15 15 SS-304
N2-B1-107-1002-S4-15 15 SS-304
N2-B1-107-1002A-S4-15 15 SS-304
N2-B1-107-1003-S4-15 15 SS-304
N2-B1-107-1004-S4-15 15 SS-304
N2-B1-107-1005-S4-15 15 SS-304
PR:B1-107-1003-S6-25 25 SS-316
PR:B1-107-1004-S6-200-IH 200 SS-316
PR:B1-107-1005-S6-100 100 SS-316
PR:B1-107-1006-S6-40 40 SS-316
PR:B1-107-1007-S6-40 40 SS-316
PR:B1-107-1008-S6-40 40 SS-316
PR:B1-107-1009-S6-40 40 SS-316
PR:B1-107-1010-S6-40 40 SS-316
PR:B1-107-1011-S6-40 40 SS-316
PR:B1-107-1012-S6-40 40 SS-316
PR:B1-107-1013-S6-40 40 SS 316
PR:B1-107-1014-S6-40 40 SS 316
PR:B1-107-1015-S6-40 40 SS 316
PR:B1-107-1016-S6-25 25 SS 316
PR:B1-107-1017-S4-25 25 SS 304
PR:B1-107-1018-S6-50 50 SS 316
PR:B1-107-1019-S6-50 50 SS-316
PR:B1-107-1020-S6-40 40 SS-316
PR:B1-107-1022-S4-25 25 SS-316
SF-B1-107-1001-MS2-80-IHC 80 MS2
SF-B1-107-1002-MS1-80-IHC 80 MS1
SF-B1-107-1003-MS1-80-IHC 80 MS1
SF-B1-107-1004-MS1-80-IHC 80 MS1
SF-B1-107-1005-MS1-80-IHC 80 MS1
SF-B1-107-1006-MS1-80-IHC 80 MS1
SF-B1-107-1007-MS2-80-IHC 80 MS2
SF1:B1-107-1001-MS1-80-IH 80 MS1
SF1:B1-107-1002-MS1-80-IH 80 MS1
SF2:B1-107-1001-MS1-80 80 MS1
SF2:B1-107-1002-MS1-80 80 MS1
SF2:B1-107-1003-MS1-80 80 MS1
SF2:B1-107-1004-MS1-80 80 MS1
SF3:B1-107-1001-MS1-50-IC 50 MS1
SF3:B1-107-1002-MS1-50-IC 50 MS1
SF3:B1-107-1003-MS1-80-IC 80 MS1
SF3:B1-107-1004-MS1-80-IC 80 MS1
SF3:B1-107-1005-MS1-25-IC 25 MS1
SF3:B1-107-1006-MS1-25-IC 25 MS1
SF4:B1-107-1001-MS1-40-IC 40 MS1
SF4:B1-107-1002-MS1-40-IC 40 MS1
SF4:B1-107-1003-MS1-25-IC 25 MS1
SF4:B1-107-1004-MS1-25-IC 25 MS1
VAC-B1-107-1001-S6-40 40 SS-316
VAC-B1-107-1001A-S6-40 40 SS-316
VAC-B1-107-1002-S6-25 25 SS-316
VAC-B1-107-1003-S6-25 25 SS-316
VT-B1-107-1001-MS1-15 15 MS1
VT-B1-107-1001A-S6-15 15 SS316
VT-B1-107-1002-MS1-15 15 MS1
VT-B1-107-1003-S6-40 40 SS-316
VT-B1-107-1003A-S6-40 40 SS-316
VT-B1-107-1004-MS1-50 50 MS1
VT-B1-107-1005-MS1-15 15 MS1
VT-B1-107-1006-PPFRP-40 40 PPFRP
RE-610 4KL * PR:B1-108-1014-S6-40 40 SS-316
DR:B1-109-1001-MS1-15 15 MS1
DR:B1-109-1002-MS1-15 15 MS1
DR:B1-109-1003-MS1-15 15 MS1
DR:B1-109-1004-MS1-15 15 MS1
DR:B1-109-1005-S6-15 15 SS-316
DR:B1-109-1006-S6-50 50 SS-316
DR:B1-109-1007-MS1-15 15 MS1
DR:B1-109-1008-MS1-15 15 MS1
DR:B1-109-1009-S6-15 15 SS-316
DR:B1-109-1010-S6-15 15 SS-316
DR:B1-109-1011-S6-15 15 SS-316
DR:B1-109-1012-S6-15 15 SS-316
DR:B1-109-1013-S6-15 15 SS-316
DR:B1-109-1014-S6-40 40 SS-316
DR:B1-109-1015-S6-40 40 SS-316
HTDS-B1-109-1001-HDPE-- 110-OD HDPE
LTDS-B1-109-1001-HDPE-- 110-OD HDPE
N2-B1-109-1001-S4-25 25 SS-304
N2-B1-109-1001A-S4-15 15 SS-304
N2-B1-109-1002-S4-15 15 SS-304
N2-B1-109-1002A-S4-15 15 SS-304
N2-B1-109-1003-S4-15 15 SS-304
N2-B1-109-1004-S4-15 15 SS-304
N2-B1-109-1005-S4-15 15 SS-304
N2-B1-109-1006-S4-15 15 SS-304
N2-B1-109-1007-S4-15 15 SS-304
PR:B1-109-1001-S4-40 40 SS-316
PR:B1-109-1002-S4-40 40 SS-316
PR:B1-109-1003-S6-40 40 SS-316
PR:B1-109-1004-S6-40 40 SS-316
PR:B1-109-1005-S4-40 40 SS-316
PR:B1-109-1006-S6-50 50 SS-316
PR:B1-109-1007-S6-25 25 SS-316
PR:B1-109-1008-S6-200-IH 200 SS-316
PR:B1-109-1009-S6-100 100 SS-316
PR:B1-109-1010-S6-40 40 SS-316
PR:B1-109-1011-S6-40 40 SS-316
PR:B1-109-1012-S6-40 40 SS-316
PR:B1-109-1013-S6-40 40 SS-316
PR:B1-109-1014-S6-40 40 SS 316
PR:B1-109-1015-S4-25 25 SS 304
PR:B1-109-1015A-S6-25 25 SS 316
PR:B1-109-1016-S6-80 80 SS 316
PR:B1-109-1017-S6-80 80 SS-316
PR:B1-109-1018-S6-50 50 SS-316
PR:B1-109-1020-S4-40 40 SS-316
PW-B1-109-1001-S7E-25 25 SS-316L
PW-B1-109-1002-S7E-25 25 SS-316L
SF-B1-109-1001-MS2-80-IHC 80 MS2
SF-B1-109-1002-MS1-80-IHC 80 MS1
SF-B1-109-1003-MS1-80-IHC 80 MS1
SF-B1-109-1004-MS1-80-IHC 80 MS1
SF-B1-109-1005-MS1-80-IHC 80 MS1
SF-B1-109-1006-MS1-80-IHC 80 MS1
SF-B1-109-1007-MS2-80-IHC 80 MS2
SF1:B1-109-1001-MS1-80-IH 80 MS1
SF1:B1-109-1002-MS1-80-IH 80 MS1
SF2:B1-109-1001-MS1-80 80 MS1
SF2:B1-109-1002-MS1-80 80 MS1
SF2:B1-109-1003-MS1-80 80 MS1
SF2:B1-109-1004-MS1-80 80 MS1
SF3:B1-109-1001-MS1-50-IC 50 MS1
SF3:B1-109-1002-MS1-50-IC 50 MS1
SF3:B1-109-1003-MS1-80-IC 80 MS1
SF3:B1-109-1004-MS1-80-IC 80 MS1
SF3:B1-109-1005-MS1-25-IC 25 MS1
SF3:B1-109-1006-MS1-25-IC 25 MS1
SF3:B1-109-1007-MS1-40-IC 40 MS1
SF3:B1-109-1008-MS1-40-IC 40 MS1
SF3:B1-109-1009-MS1-25-IC 25 MS1
SF3:B1-109-1010-MS1-25-IC 25 MS1
SF4:B1-109-1001-MS1-40-IC 40 MS1
SF4:B1-109-1002-MS1-40-IC 40 MS1
SF4:B1-109-1003-MS1-25-IC 25 MS1
SF4:B1-109-1004-MS1-25-IC 25 MS1
VAC-B1-109-1001-S6-50 50 SS-316
VAC-B1-109-1004-S6-15 15 SS-316
VAC-B1-109-1005-S6-50 50 SS-316
VAC-B1-109-1006-S6-25 25 SS-316
VAC:B1-109-1002-S6-25 25 SS-316
VAC:B1-109-1003-S6-25 25 SS-316
VT-B1-109-1001-PPFRP-40 40 PPFRP
VT-B1-109-1001A-S6-15 15 MS1
VT-B1-109-1004-MS1-15 15 MS1
VT-B1-109-1005-S6-40 40 SS-316
VT-B1-109-1005A-S6-40 40 SS-316
VT-B1-109-1006-MS1-50 50 MS1
VT-B1-109-1007-PPFRP-15 15 PPFRP
VT-B1-109-1008-MS1-15 15 MS1
VT-B1-109-1009-MS1-15 15 MS1
VT-B1-109-1010-MS1-15 15 MS1
VT-B1-109-1011-MS1-15 15 MS1
VT:B1-109-1002-PPFRP-25 25 PPFRP
VT:B1-109-1003-PPFRP-25 25 PPFRP
RE-615 6.5KL * PR:B1-105-1025-S4-40 40 SS-304
DR:B1-105-1001-MS1-15 15 MS1
DR:B1-105-1002-MS1-15 15 MS1
DR:B1-105-1003-MS1-15 15 MS1
DR:B1-105-1004-MS1-15 15 MS1
DR:B1-105-1005-S6-15 15 SS-316
DR:B1-105-1006-S6-80 80 SS-316
DR:B1-105-1007-MS1-15 15 MS1
DR:B1-105-1008-MS1-15 15 MS1
DR:B1-105-1009-S6-15 15 SS-316
DR:B1-105-1010-S6-15 15 SS-316
DR:B1-105-1011-S6-15 15 SS-316
DR:B1-105-1012-S6-15 15 SS-316
DR:B1-105-1013-S6-15 15 SS-316
HTDS-B1-105-1001-HDPE-- 110-OD HDPE
LTDS-B1-105-1001-HDPE-- 110-OD HDPE
N2-B1-105-1001-S4-25 25 SS-304
N2-B1-105-1001A-S4-15 15 SS-304
N2-B1-105-1002-S4-15 15 SS-304
N2-B1-105-1002A-S4-15 15 SS-304
N2-B1-105-1003-S4-15 15 SS-304
N2-B1-105-1004-S4-15 15 SS-304
N2-B1-105-1005-S4-15 15 SS-304
N2-B1-105-1006-S4-15 15 SS-304
PR-B1-105-1007-S6-25 25 SS-316
PR-B1-105-1021-S6-80 80 SS-316
PR:B1-105-1001-S6-50 50 SS-316
PR:B1-105-1002-S6-25 25 SS-316
PR:B1-105-1003-S6-25 25 SS-316
PR:B1-105-1004-S6-25 25 SS-316
PR:B1-105-1005-S6-25 25 SS-316
PR:B1-105-1006-S6-50 50 SS-316
PR:B1-105-1008-S6-250-IH 250 SS-316
PR:B1-105-1009-S6-150 150 SS-316
PR:B1-105-1010-S6-25 25 SS-316
PR:B1-105-1011-S6-40 40 SS-316
PR:B1-105-1012-S6-40 40 SS-316
PR:B1-105-1013-S6-40 40 SS-316
PR:B1-105-1014-S6-40 40 SS-316
PR:B1-105-1015-S6-40 40 SS-316
PR:B1-105-1016-S6-40 40 SS 316
PR:B1-105-1017-S6-40 40 SS 316
PR:B1-105-1018-S6-40 40 SS 316
PR:B1-105-1019-S6-25 25 SS 316
PR:B1-105-1020-S4-25 25 SS 304
PR:B1-105-1022-S6-80 80 SS-316
PR:B1-105-1023-S6-50 50 SS-316
PR:B1-105-1024-S4-40 40 SS-304
SF-B1-105-1001-MS2-100-IHC 100 MS2
SF-B1-105-1002-MS1-80-IHC 80 MS1
SF-B1-105-1003-MS1-80-IHC 80 MS1
SF-B1-105-1004-MS1-80-IHC 80 MS1
SF-B1-105-1005-MS1-80-IHC 80 MS1
SF-B1-105-1006-MS1-80-IHC 80 MS1
SF-B1-105-1007-MS2-100-IHC 100 MS2
SF1:B1-105-1001-MS1-80-IH 80 MS1
SF1:B1-105-1002-MS1-80-IH 80 MS1
SF2:B1-105-1001-MS1-80 80 MS1
SF2:B1-105-1002-MS1-80 80 MS1
SF2:B1-105-1003-MS1-80 80 MS1
SF2:B1-105-1004-MS1-80 80 MS1
SF3:B1-105-1001-MS1-50-IC 50 MS1
SF3:B1-105-1002-MS1-50-IC 50 MS1
SF3:B1-105-1003-MS1-80-IC 80 MS1
SF3:B1-105-1004-MS1-80-IC 80 MS1
SF3:B1-105-1005-MS1-25-IC 25 MS1
SF3:B1-105-1006-MS1-25-IC 25 MS1
SF4:B1-105-1001-MS1-40-IC 40 MS1
SF4:B1-105-1002-MS1-40-IC 40 MS1
SF4:B1-105-1003-MS1-25-IC 25 MS1
SF4:B1-105-1004-MS1-25-IC 25 MS1
VAC-B1-105-1001-S6-50 50 SS-316
VAC-B1-105-1002-S6-15 15 SS316
VAC-B1-105-1003-S6-50 50 SS-316
VAC-B1-105-1004-S6-25 25 SS-316
VAC-B1-105-1005-S6-25 25 SS-316
VT-B1-105-1002-MS1-15 15 MS1
VT-B1-105-1003-MS1-15 15 MS1
VT-B1-105-1004-S6-50 50 SS-316
VT-B1-105-1004A-S6-50 50 SS-316
VT-B1-105-1005-MS1-80 80 MS1
VT-B1-105-1006-MS1-15 15 MS1
VT-B1-105-1007-MS1-15 15 MS1
VT:B1-105-1001-PPFRP-50 50 PPFRP
VT:B1-105-1001A-S6-15 15 S6
FLUID FROM
SPENT SOLVENT HEADER
SINGLE FLUID DRAIN RE-603
DRAIN SAMPLE POINT
DRAIN RE-603 UTILITY SUPPLY HEADER
DRAIN SFS-RE714-UCP701 (SUCTION)
DRAIN SFS-RE714-UCP701 (DISCHARGE)
DRAIN RE-603 UTILITY RETURN HEADER
DRAIN RE-603
DRAIN HE-603BSFS SUPPLY LINE
DRAIN HE-603B SFS SUPPLY LINE
DRAIN RE714-PP701 (SUCTION)
DRAIN RE714-PP701 (DISCHARGE)
DRAIN RE714-PP703 (SUCTION)
DRAIN RE714-PP703 (DISCHARGE)
DRAIN HE-603A&714B REFLUX
HTDS HEADER
LTDS HEADER
NITROGEN ULD
NITROGEN HEADER
NITROGEN HEADER
NITROGEN HEADER
NITROGEN HEADER
NITROGEN HEADER
NITROGEN HEADER
NITROGEN ULD
PROCESS PF-702
PROCESS FL-705A
PROCESS FL-705A & FL-705B
PROCESS HOSE
PROCESS FL-705A & FL-705B
PROCESS FL-705A & FL-705B
PROCESS RE-603
PROCESS HE-603A
PROCESS HE-603B
PROCESS HE-603A
PROCESS HE-603B& HE-603B
PROCESS RE-603 MANIFOLD (REFLUX FT)
PROCESS RE-603 MANIFOLD (REFLUX FT)
PROCESS RE-603 MANIFOLD (REFLUX FT)
PROCESS RC-714A & RC-714B
PROCESS RC-714A & RC-714B PROCESS HEADER
PROCESS RE714-PP701
PROCESS RE714-PP701
PROCESS (METHANOL) RE714-PP701 PROCESS HEADER
PROCESS (MDC) RE714-PP701 PROCESS HEADER
PROCESS (n-HEPTANE) RE714-PP701 PROCESS HEADER
PROCESS (n-HEPTANE) RE714-PP701 PROCESS HEADER
PROCESS RE-603 (BOTTOM OUTLET)
PROCESS HOSE (RE-603 BOTTOM OUTLET)
PROCESS SAMPLE POINT
PROCESS RE-603 (BOTTOM OUTLET)
PROCESS RE714-PP703
SINGLE FLUID-1 RE-603 SUPPLY HEADER
SINGLE FLUID-1 ULD
SINGLE FLUID-2 RE-603 SUPPLY HEADER
SINGLE FLUID-2 HE-603A
SINGLE FLUID-3 ULD
SINGLE FLUID-2 ULD
SINGLE FLUID-3 RE-603 SUPPLY HEADER
SINGLE FLUID-3 HE-603A
SINGLE FLUID-3 HE-603B
SINGLE FLUID-3 ULD
SINGLE FLUID-3 ULD
SINGLE FLUID-3 ULD
SINGLE FLUID-4 RE-603 SUPPLY HEADER
SINGLE FLUID-4 HE-603B
SINGLE FLUID-4 ULD
SINGLE FLUID-4 ULD
SINGLE FLUIDS RETURN RE-603
SINGLE FLUIDS RETURN SFS-RE714-UCP701
SINGLE FLUIDS RETURN SFS-RE714-UCP701 & RE-603
SINGLE FLUIDS SUPPLY RE-603 SUPPLY HEADER
SINGLE FLUIDS SUPPLY RE-603 SUPPLY HEADER
SINGLE FLUIDS SUPPLY RE-603 SUPPLY HEADER
SINGLE FLUIDS SUPPLY SFS-RE714-UCP701
SINGLE FLUIDS SUPPLY RE-603 SUPPLY HEADER
VACUUM SAMPLE POINT
VACUUM HE-603B
VACUUM HE-603B
VACUUM (BALANCING LINE) RC-714A
VACUUM (BALANCING LINE) RC-714B
VENT RE-603
VENT SAMPLE POINT
VENT HE-603B
VENT RE-603 (PSV)
VENT HE-603B
VENT HE-603B
VENT HE-603A
VENT RE-603
VENT RE-603
SPENT SOLVENT HEADER
SINGLE FLUID DRAIN RE-604
DRAIN SAMPLE POINT
DRAIN RE-604 UTILITY SUPPLY HEADER
DRAIN SFS-RE714-UCP701 (SUCTION)
DRAIN SFS-RE714-UCP701 (DISCHARGE)
DRAIN RE-604 UTILITY RETURN HEADER
DRAIN RE-604
DRAIN HE-604BSFS SUPPLY LINE
DRAIN HE-604B SFS SUPPLY LINE
DRAIN RE714-PP701 (SUCTION)
DRAIN RE714-PP701 (DISCHARGE)
DRAIN RE714-PP703 (SUCTION)
DRAIN RE714-PP703 (DISCHARGE)
DRAIN HE-604A&714B REFLUX
HTDS HEADER
LTDS HEADER
NITROGEN ULD
NITROGEN HEADER
NITROGEN HEADER
NITROGEN HEADER
NITROGEN HEADER
NITROGEN HEADER
NITROGEN HEADER
NITROGEN ULD
PROCESS PF-702
PROCESS FL-705A
PROCESS FL-705A & FL-705B
PROCESS HOSE
PROCESS FL-705A & FL-705B
PROCESS FL-705A & FL-705B
PROCESS RE-604
PROCESS HE-604A
PROCESS HE-604B
PROCESS HE-604A
PROCESS HE-604B& HE-604B
PROCESS RE-604 MANIFOLD (REFLUX FT)
PROCESS RE-604 MANIFOLD (REFLUX FT)
PROCESS RE-604 MANIFOLD (REFLUX FT)
PROCESS RC-714A & RC-714B
PROCESS RC-714A & RC-714B PROCESS HEADER
PROCESS RE714-PP701
PROCESS RE714-PP701
PROCESS (METHANOL) RE714-PP701 PROCESS HEADER
PROCESS (MDC) RE714-PP701 PROCESS HEADER
PROCESS (n-HEPTANE) RE714-PP701 PROCESS HEADER
PROCESS (n-HEPTANE) RE714-PP701 PROCESS HEADER
PROCESS RE-604 (BOTTOM OUTLET)
PROCESS HOSE (RE-604 BOTTOM OUTLET)
PROCESS SAMPLE POINT
PROCESS RE-604 (BOTTOM OUTLET)
PROCESS RE714-PP703
SINGLE FLUID-1 RE-604 SUPPLY HEADER
SINGLE FLUID-1 ULD
SINGLE FLUID-2 RE-604 SUPPLY HEADER
SINGLE FLUID-2 HE-604A
SINGLE FLUID-3 ULD
SINGLE FLUID-2 ULD
SINGLE FLUID-3 RE-604 SUPPLY HEADER
SINGLE FLUID-3 HE-604A
SINGLE FLUID-3 HE-604B
SINGLE FLUID-3 ULD
SINGLE FLUID-3 ULD
SINGLE FLUID-3 ULD
SINGLE FLUID-4 RE-604 SUPPLY HEADER
SINGLE FLUID-4 HE-604B
SINGLE FLUID-4 ULD
SINGLE FLUID-4 ULD
SINGLE FLUIDS RETURN RE-604
SINGLE FLUIDS RETURN SFS-RE714-UCP701
SINGLE FLUIDS RETURN SFS-RE714-UCP701 & RE-604
SINGLE FLUIDS SUPPLY RE-604 SUPPLY HEADER
SINGLE FLUIDS SUPPLY RE-604 SUPPLY HEADER
SINGLE FLUIDS SUPPLY RE-604 SUPPLY HEADER
SINGLE FLUIDS SUPPLY SFS-RE714-UCP701
SINGLE FLUIDS SUPPLY RE-604 SUPPLY HEADER
VACUUM SAMPLE POINT
VACUUM HE-604B
VACUUM HE-604B
VACUUM (BALANCING LINE) RC-714A
VACUUM (BALANCING LINE) RC-714B
VENT RE-604
VENT SAMPLE POINT
VENT HE-604B
VENT RE-604 (PSV)
VENT HE-604B
VENT HE-604B
VENT HE-604A
VENT RE-604
VENT RE-604
PROCESS FROM RE-704
PROCESS FROM RE-705
MDC DST-710
METHANOL DST-702
DMF DST-704
PROCESS HE-707A &HE707B
CA ULD
DRAIN UTILITY SUPPLY HEADER
DRAIN UTILITY RETURN HEADER
DRAIN DT-702
DRAIN DT-702
DRAIN SAMPLE POT
DRAIN VACUUM HEADER (CP-702)
DRAIN CP-702 OUTLET
DRAIN HE706B SUPPLY HEADER
DRAIN HE-606A SUPPLY HEADER
REFLEX DRAIN HE-606A&706B
DRAIN RE706-PP701
DRAIN RE706-PP701 OUTLET
DRAIN RE-606
DRAIN RE-606
HTDS HEADER
LTDS HEADER
NITROGEN ULD
NITROGEN HEADER
NITROGEN HEADER
NITROGEN HEADER
NITROGEN HE-606B
NITROGEN ULD
NITROGEN ULD
NITROGEN HEADER
NITROGEN HEADER
PROCESS AODD PUMP
PROCESS DT-702
PROCESS AODD PUMP
PROCESS CP-702
PROCESS MANIFOLD
PROCESS CP-702
PROCESS CP-702
PROCESS MANIFOLD
PROCESS CT704A-PP701
PROCESS AMMONIA SOLUTION (135L) CARBOY
PROCESS PYRIDINE(157.5 Kg) DRUM
PROCESS MANIFOLD
PROCESS MANIFOLD
PROCESS RE-606
PROCESS RE-606
PROCESS HE-606A
PROCESS HE-606B
PROCESS HE-606A
PROCESS HE-606A &706B
PROCESS HE-606A &706B
PROCESS RC-706A
PROCESS RE706-PP701
PROCESS RE706-PP701
PROCESS RE-606
PROCESS RE-606 HEADER
PROCESS RE-606 HEADER
PROCESS RE-606 HEADER
PROCESS RE-606 HEADER
PROCESS HOSE
PROCESS HOSE
PURIFIED WATER ULD
PURIFIED WATER ULD
SF SUPPLY HEADER
SF SUPPLY HEADER
SF SF705-PHE02
SF SF705-PHE02
SF SUPPLY HEADER
SF RE-606
SF RE706-ET01
SF RE706-ET01
SF RE-606 & RE706-ET01
SF RE706-PU01
SF RE706-PU01
SF SF706-PHE01
SINGLE FLUID-1 ULD
SINGLE FLUID-1 ULD
SINGLE FLUID-2 ULD
SINGLE FLUID-2 HE-706 RETURN HEADER
SINGLE FLUID-2 ULD
SINGLE FLUID-2 HE-606A RETURN HEADER
SINGLE FLUID-3 ULD
SINGLE FLUID-3 HE-706 RETURN HEADER
SINGLE FLUID-3 ULD
SINGLE FLUID-3 HE-606A RETURN HEADER
SINGLE FLUID-3 ULD
SINGLE FLUID-3 HE-606B RETURN HEADER
SINGLE FLUID-3 ULD
SINGLE FLUID-3 DT-702 RETURN HEADER
SINGLE FLUID-4 ULD
SINGLE FLUID-4 HE-706 RETURN HEADER
SINGLE FLUID-4 ULD
SINGLE FLUID-4 HE-606B RETURN HEADER
VACUUM HE-606B
VACUUM CP-702
VACUUM VACUUM HEADER (CP-702)
VACUUM SAMPLE POINT
VACUUM DT-702
VACUUM DT-702
VACUUM RC-706A
VACUUM HE-606B
VACUUM RC-706A
VENT HE-606B
VENT HE-606B
VENT SAMPLE POINT
VENT RE-606
VENT RE-606
VENT RE-606
VENT RE-606 PSV-501
VENT DT-702
VENT HE-606A
VENT HE-606B
VENT DT-702
VENT CP-703
VENT VACUUM HEADER (CP-702)
PROCESS FROM RE-704
PROCESS FROM RE-705
MDC DST-710
METHANOL DST-702
DMF DST-704
PROCESS HE-707A &HE707B
CA ULD
DRAIN UTILITY SUPPLY HEADER
DRAIN UTILITY RETURN HEADER
DRAIN DT-702
DRAIN DT-702
DRAIN SAMPLE POT
DRAIN VACUUM HEADER (CP-702)
DRAIN CP-702 OUTLET
DRAIN HE706B SUPPLY HEADER
DRAIN HE-607A SUPPLY HEADER
REFLEX DRAIN HE-607A&706B
DRAIN RE706-PP701
DRAIN RE706-PP701 OUTLET
DRAIN RE-607
DRAIN RE-607
HTDS HEADER
LTDS HEADER
NITROGEN ULD
NITROGEN HEADER
NITROGEN HEADER
NITROGEN HEADER
NITROGEN HE-607B
NITROGEN ULD
NITROGEN ULD
NITROGEN HEADER
NITROGEN HEADER
PROCESS AODD PUMP
PROCESS DT-702
PROCESS AODD PUMP
PROCESS CP-702
PROCESS MANIFOLD
PROCESS CP-702
PROCESS CP-702
PROCESS MANIFOLD
PROCESS CT704A-PP701
PROCESS AMMONIA SOLUTION (135L) CARBOY
PROCESS PYRIDINE(157.5 Kg) DRUM
PROCESS MANIFOLD
PROCESS MANIFOLD
PROCESS RE-607
PROCESS RE-607
PROCESS HE-607A
PROCESS HE-607B
PROCESS HE-607A
PROCESS HE-607A &706B
PROCESS HE-607A &706B
PROCESS RC-706A
PROCESS RE706-PP701
PROCESS RE706-PP701
PROCESS RE-607
PROCESS RE-607 HEADER
PROCESS RE-607 HEADER
PROCESS RE-607 HEADER
PROCESS RE-607 HEADER
PROCESS HOSE
PROCESS HOSE
PURIFIED WATER ULD
PURIFIED WATER ULD
SF SUPPLY HEADER
SF SUPPLY HEADER
SF SF705-PHE02
SF SF705-PHE02
SF SUPPLY HEADER
SF RE-607
SF RE706-ET01
SF RE706-ET01
SF RE-607 & RE706-ET01
SF RE706-PU01
SF RE706-PU01
SF SF706-PHE01
SINGLE FLUID-1 ULD
SINGLE FLUID-1 ULD
SINGLE FLUID-2 ULD
SINGLE FLUID-2 HE-706 RETURN HEADER
SINGLE FLUID-2 ULD
SINGLE FLUID-2 HE-607A RETURN HEADER
SINGLE FLUID-3 ULD
SINGLE FLUID-3 HE-706 RETURN HEADER
SINGLE FLUID-3 ULD
SINGLE FLUID-3 HE-607A RETURN HEADER
SINGLE FLUID-3 ULD
SINGLE FLUID-3 HE-607B RETURN HEADER
SINGLE FLUID-3 ULD
SINGLE FLUID-3 DT-702 RETURN HEADER
SINGLE FLUID-4 ULD
SINGLE FLUID-4 HE-706 RETURN HEADER
SINGLE FLUID-4 ULD
SINGLE FLUID-4 HE-607B RETURN HEADER
VACUUM HE-607B
VACUUM CP-702
VACUUM VACUUM HEADER (CP-702)
VACUUM SAMPLE POINT
VACUUM DT-702
VACUUM DT-702
VACUUM RC-706A
VACUUM HE-607B
VACUUM RC-706A
VENT HE-607B
VENT HE-607B
VENT SAMPLE POINT
VENT RE-607
VENT RE-607
VENT RE-607
VENT RE-607 PSV-501
VENT DT-702
VENT HE-607A
VENT HE-607B
VENT DT-702
VENT CP-703
VENT VACUUM HEADER (CP-702)
PROCESS FROM RE-704
PROCESS FROM RE-705
MDC DST-710
METHANOL DST-702
DMF DST-704
PROCESS HE-707A &HE707B
CA ULD
DRAIN UTILITY SUPPLY HEADER
DRAIN UTILITY RETURN HEADER
DRAIN DT-702
DRAIN DT-702
DRAIN SAMPLE POT
DRAIN VACUUM HEADER (CP-702)
DRAIN CP-702 OUTLET
DRAIN HE706B SUPPLY HEADER
DRAIN HE-610A SUPPLY HEADER
REFLEX DRAIN HE-610A&706B
DRAIN RE706-PP701
DRAIN RE706-PP701 OUTLET
DRAIN RE-610
DRAIN RE-610
HTDS HEADER
LTDS HEADER
NITROGEN ULD
NITROGEN HEADER
NITROGEN HEADER
NITROGEN HEADER
NITROGEN HE-610B
NITROGEN ULD
NITROGEN ULD
NITROGEN HEADER
NITROGEN HEADER
PROCESS AODD PUMP
PROCESS DT-702
PROCESS AODD PUMP
PROCESS CP-702
PROCESS MANIFOLD
PROCESS CP-702
PROCESS CP-702
PROCESS MANIFOLD
PROCESS CT704A-PP701
PROCESS AMMONIA SOLUTION (135L) CARBOY
PROCESS PYRIDINE(157.5 Kg) DRUM
PROCESS MANIFOLD
PROCESS MANIFOLD
PROCESS RE-610
PROCESS RE-610
PROCESS HE-610A
PROCESS HE-610B
PROCESS HE-610A
PROCESS HE-610A &706B
PROCESS HE-610A &706B
PROCESS RC-706A
PROCESS RE706-PP701
PROCESS RE706-PP701
PROCESS RE-610
PROCESS RE-610 HEADER
PROCESS RE-610 HEADER
PROCESS RE-610 HEADER
PROCESS RE-610 HEADER
PROCESS HOSE
PROCESS HOSE
PURIFIED WATER ULD
PURIFIED WATER ULD
SF SUPPLY HEADER
SF SUPPLY HEADER
SF SF705-PHE02
SF SF705-PHE02
SF SUPPLY HEADER
SF RE-610
SF RE706-ET01
SF RE706-ET01
SF RE-610 & RE706-ET01
SF RE706-PU01
SF RE706-PU01
SF SF706-PHE01
SINGLE FLUID-1 ULD
SINGLE FLUID-1 ULD
SINGLE FLUID-2 ULD
SINGLE FLUID-2 HE-706 RETURN HEADER
SINGLE FLUID-2 ULD
SINGLE FLUID-2 HE-610A RETURN HEADER
SINGLE FLUID-3 ULD
SINGLE FLUID-3 HE-706 RETURN HEADER
SINGLE FLUID-3 ULD
SINGLE FLUID-3 HE-610A RETURN HEADER
SINGLE FLUID-3 ULD
SINGLE FLUID-3 HE-610B RETURN HEADER
SINGLE FLUID-3 ULD
SINGLE FLUID-3 DT-702 RETURN HEADER
SINGLE FLUID-4 ULD
SINGLE FLUID-4 HE-706 RETURN HEADER
SINGLE FLUID-4 ULD
SINGLE FLUID-4 HE-610B RETURN HEADER
VACUUM HE-610B
VACUUM CP-702
VACUUM VACUUM HEADER (CP-702)
VACUUM SAMPLE POINT
VACUUM DT-702
VACUUM DT-702
VACUUM RC-706A
VACUUM HE-610B
VACUUM RC-706A
VENT HE-610B
VENT HE-610B
VENT SAMPLE POINT
VENT RE-610
VENT RE-610
VENT RE-610
VENT RE-610 PSV-501
VENT DT-702
VENT HE-610A
VENT HE-610B
VENT DT-702
VENT CP-703
VENT VACUUM HEADER (CP-702)
SPENT SOLVENT HEADER
SINGLE FLUID DRAIN RE-613
DRAIN SAMPLE POINT
DRAIN RE-613 UTILITY SUPPLY HEADER
DRAIN SFS-RE714-UCP701 (SUCTION)
DRAIN SFS-RE714-UCP701 (DISCHARGE)
DRAIN RE-613 UTILITY RETURN HEADER
DRAIN RE-613
DRAIN HE-613BSFS SUPPLY LINE
DRAIN HE-613B SFS SUPPLY LINE
DRAIN RE714-PP701 (SUCTION)
DRAIN RE714-PP701 (DISCHARGE)
DRAIN RE714-PP703 (SUCTION)
DRAIN RE714-PP703 (DISCHARGE)
DRAIN HE-613A&714B REFLUX
HTDS HEADER
LTDS HEADER
NITROGEN ULD
NITROGEN HEADER
NITROGEN HEADER
NITROGEN HEADER
NITROGEN HEADER
NITROGEN HEADER
NITROGEN HEADER
NITROGEN ULD
PROCESS PF-702
PROCESS FL-705A
PROCESS FL-705A & FL-705B
PROCESS HOSE
PROCESS FL-705A & FL-705B
PROCESS FL-705A & FL-705B
PROCESS RE-613
PROCESS HE-613A
PROCESS HE-613B
PROCESS HE-613A
PROCESS HE-613B& HE-613B
PROCESS RE-613 MANIFOLD (REFLUX FT)
PROCESS RE-613 MANIFOLD (REFLUX FT)
PROCESS RE-613 MANIFOLD (REFLUX FT)
PROCESS RC-714A & RC-714B
PROCESS RC-714A & RC-714B PROCESS HEADER
PROCESS RE714-PP701
PROCESS RE714-PP701
PROCESS (METHANOL) RE714-PP701 PROCESS HEADER
PROCESS (MDC) RE714-PP701 PROCESS HEADER
PROCESS (n-HEPTANE) RE714-PP701 PROCESS HEADER
PROCESS (n-HEPTANE) RE714-PP701 PROCESS HEADER
PROCESS RE-613 (BOTTOM OUTLET)
PROCESS HOSE (RE-613 BOTTOM OUTLET)
PROCESS SAMPLE POINT
PROCESS RE-613 (BOTTOM OUTLET)
PROCESS RE714-PP703
SINGLE FLUID-1 RE-613 SUPPLY HEADER
SINGLE FLUID-1 ULD
SINGLE FLUID-2 RE-613 SUPPLY HEADER
SINGLE FLUID-2 HE-613A
SINGLE FLUID-3 ULD
SINGLE FLUID-2 ULD
SINGLE FLUID-3 RE-613 SUPPLY HEADER
SINGLE FLUID-3 HE-613A
SINGLE FLUID-3 HE-613B
SINGLE FLUID-3 ULD
SINGLE FLUID-3 ULD
SINGLE FLUID-3 ULD
SINGLE FLUID-4 RE-613 SUPPLY HEADER
SINGLE FLUID-4 HE-613B
SINGLE FLUID-4 ULD
SINGLE FLUID-4 ULD
SINGLE FLUIDS RETURN RE-613
SINGLE FLUIDS RETURN SFS-RE714-UCP701
SINGLE FLUIDS RETURN SFS-RE714-UCP701 & RE-613
SINGLE FLUIDS SUPPLY RE-613 SUPPLY HEADER
SINGLE FLUIDS SUPPLY RE-613 SUPPLY HEADER
SINGLE FLUIDS SUPPLY RE-613 SUPPLY HEADER
SINGLE FLUIDS SUPPLY SFS-RE714-UCP701
SINGLE FLUIDS SUPPLY RE-613 SUPPLY HEADER
VACUUM SAMPLE POINT
VACUUM HE-613B
VACUUM HE-613B
VACUUM (BALANCING LINE) RC-714A
VACUUM (BALANCING LINE) RC-714B
VENT RE-613
VENT SAMPLE POINT
VENT HE-613B
VENT RE-613 (PSV)
VENT HE-613B
VENT HE-613B
VENT HE-613A
VENT RE-613
VENT RE-613
PROCESS DST-710
PROCESS DST-702
DRAIN UTILITY SUPPLY HEADER
DRAIN SFS-RE707-UCP701 INLET
DRAIN SFS-RE707-UCP701 OUTLET
DRAIN UTILITY RETURN HEADER
DRAIN RE-616 OUT;ET
DRAIN HE-616B SUPPLY HEADER
DRAIN HE-616A SUPPLY HEADER
DRAIN RC701A & RC701B
DRAIN RE707-PP701
REFLEX DRAIN HE-616A&707B
DRAIN RE-616
DRAIN RE707-PP702
HTDS HEADER
LTDS HEADER
NITROGEN ULD
NITROGEN HEADER
NITROGEN HEADER
NITROGEN HEADER
NITROGEN HEADER
NITROGEN ULD
NITROGEN HEADER
PROCESS CT704A-PP701
PROCESS RE-616
PROCESS HE-616A
PROCESS HE-616B
PROCESS HE-616A
PROCESS HE-616A &HE707B
PROCESS HE-616A&707B
PROCESS HE-616A &HE707B
PROCESS HE-616A &HE707B
PROCESS HE-616A &HE707B
PROCESS RC-707A
PROCESS RC-707B
PROCESS RC-707A&707B
PROCESS RE707-PP701
PROCESS RE707-PP701
PROCESS RE-616
PROCESS RE-616
PROCESS RE707-PP702
PROCESS HOSE
SF SUPPLY HEADER
SF SUPPLY HEADER
SF SUPPLY HEADER
SF SFS-RE707-UCP701
SF RE-616
SF RE-616
SF RE-616
SINGLE FLUID-1 ULD
SINGLE FLUID-1 RE-616 RETURN HEADER
SINGLE FLUID-2 ULD
SINGLE FLUID-2 RE-616 RETURN HEADER
SINGLE FLUID-2 ULD
SINGLE FLUID-2 HE-616A RETURN HEADER
SINGLE FLUID-3 ULD
SINGLE FLUID-3 RE-616 RETURN HEADER
SINGLE FLUID-3 ULD
SINGLE FLUID-3 HE-616A RETURN HEADER
SINGLE FLUID-3 ULD
SINGLE FLUID-3 HE-616B RETURN HEADER
SINGLE FLUID-4 ULD
SINGLE FLUID-4 RE-616 RETURN HEADER
SINGLE FLUID-4 ULD
SINGLE FLUID-4 HE-616B RETURN HEADER
VACUUM HE-616B
VACUUM HE-616B
VACUUM HE-616B
VACUUM HE-616B
VENT HE-616B
VENT HE-616B
VENT RE-616
VENT RE-616
VENT RE-616
VENT RE-616 (PSV-501)
VENT HE-616B
VENT HE-706B
PROCESS RE708-PP702
DRAIN UTILITY SUPPLY HEADER
DRAIN SFS-RE709-UCP701 SECTION
DRAIN SFS-RE709-UCP701 DISCHARGE
DRAIN UTILITY RETURN HEADER
DRAIN RE-709
DRAIN RE-709 OUTLET
DRAIN HE-709A SUPPLY HEADER
DRAIN HE-709B SUPPLY HEADER
DRAIN HE-709A&709B
DRAIN RC-709A
DRAIN RE709-PP701
DRAIN RE-709
DRAIN RE709-PP702
DRAIN DT-703A
DRAIN DT-703B
HTDS HEADER
LTDS HEADER
NITROGEN ULD
NITROGEN HEADER
NITROGEN HEADER
NITROGEN HEADER
NITROGEN HEADER
NITROGEN HEADER
NITROGEN HEADER
NITROGEN ULD
NITROGEN HEADER
PROCESS HOSE
PROCESS HOSE
PROCESS DT-703A
PROCESS DT-703B
PROCESS DST-702
PROCESS MANIFOLD
PROCESS RE-707
PROCESS RE-709
PROCESS HE-709A
PROCESS HE-709B
PROCESS HE-709A
PROCESS HE-709A & 709B
PROCESS HE-709A & 709B
PROCESS RC-709A
PROCESS RE709-PP701
PROCESS RE709-PP701
PROCESS RE-709
PROCESS RE-709
PROCESS RE-709
PROCESS DST-702 HOSE
PURIFIED WATER ULD
PURIFIED WATER RE-709
SF UTILITY SUPPLY HEADER
SF SUPPLY HEADER
SF SUPPLY HEADER
SF SFS-RE709-UCP701
SF RE-709
SF RE-709
SF RE-709
SINGLE FLUID-1 ULD
SINGLE FLUID-1 ULD
SINGLE FLUID-2 ULD
SINGLE FLUID-2 ULD
SINGLE FLUID-2 ULD
SINGLE FLUID-2 HE-709A RETURN HEADER
SINGLE FLUID-3 ULD
SINGLE FLUID-3 ULD
SINGLE FLUID-3 ULD
SINGLE FLUID-3 HE-709A RETURN HEADER
SINGLE FLUID-3 ULD
SINGLE FLUID-3 HE-709B RETURN HEADER
SINGLE FLUID-3 ULD
SINGLE FLUID-3 DT-703A RETURN HEADER
SINGLE FLUID-3 ULD
SINGLE FLUID-3 DT703B RETURN HEADER
SINGLE FLUID-4 ULD
SINGLE FLUID-4 ULD
SINGLE FLUID-4 ULD
SINGLE FLUID-4 ULD
VACUUM RC-709 &HE709B
VACUUM SAMPLE POINT
VACUUM HE-709B
VACUUM RC-709
VACUUM DT-703A
VACUUM DT-703B
VENT HE-706B
VENT HE-709B
VENT RE-709
VENT RE-709
VENT RE-709
VENT RE-709 (PSV-501)
VENT SAMPLE POINT
VENT HE-709A
VENT HE-709B
VENT DT-703A UTILITY HEADER
VENT DT-703B UTILITY HEADER
VENT DT-703A
VENT DT-703B
MDC DST-710
DRAIN UTILITY SUPPLY HEADER
DRAIN SFS-RE705-UCP701 INLET
DRAIN SFS-RE705-UCP701 OUTLET
DRAIN UTILITY RETURN HEADER
DRAIN SAMPLE POINT
DRAIN RE-075
DRAIN HE-615A SUPPLY HEADER
DRAIN HE-615B SUPPLY HEADER
DRAIN RC-705A&705B
DRAIN RE705-PP601
DRAIN RE-615
DRAIN RE705-PP702
REFLEX DRAIN HE-615A&705B
HTDS HEADER
LTDS HEADER
NITROGEN ULD
NITROGEN HEADER
NITROGEN HEADER
NITROGEN HEADER
NITROGEN HEADER
NITROGEN HEADER
NITROGEN ULD
NITROGEN HEADER
PROCESS SAMPILE POINT
PROCESS RE-615
PROCESS FD-703,CT-701A&701B
PROCESS CT-702B
PROCESS CT-702A
PROCESS CT-701B
PROCESS CT-701A
PROCESS MANIFOLD
PROCESS RE-615
PROCESS HE-615A
PROCESS HE-615B
PROCESS HE-615A
PROCESS HE-615A & 705B
PROCESS HE-615A & 705B
PROCESS HE-615A&704B
PROCESS HE-615A & 705B (FT-301)
PROCESS RC-705A
PROCESS RC-705B
PROCESS RC-705A&705B
PROCESS RE705-PP601
PROCESS RE705-PP601 DISCHARGE
PROCESS RE-615
PROCESS RE705-PP702
PROCESS DST-710 HOSE
SF SUPPLY HEADER
SF SUPPLY HEADER
SF RE705 UTILITY SUPPLY HEADER
SF SFS-RE705-UCP701
SF RE-615
SF RE-615 RETURN HEADER
SF RE-615
SINGLE FLUID-1 ULD
SINGLE FLUID-1 RE-615 RETURN HEADR
SINGLE FLUID-2 ULD
SINGLE FLUID-2 RE-615 RETURN HEADR
SINGLE FLUID-2 ULD
SINGLE FLUID-2 HE-615A RETURN HEADER
SINGLE FLUID-3 ULD
SINGLE FLUID-3 RE-615 RETURN HEADR
SINGLE FLUID-3 ULD
SINGLE FLUID-3 HE-615A RETURN HEADER
SINGLE FLUID-3 ULD
SINGLE FLUID-3 HE-615B RETURN HEADER
SINGLE FLUID-4 ULD
SINGLE FLUID-4 RE-615 RETURN HEADR
SINGLE FLUID-4 ULD
SINGLE FLUID-4 HE-615B RETURN HEADER
VACUUM HE-615B
VACUUM SAMPLE POINT
VACUUM HE-615B
VACUUM RC-705A
VACUUM RC-705B
VENT SAMPLE POINT
VENT RE-615
VENT RE-615
VENT RE-615
VENT RE-615 PSV-501
VENT HE-615A
VENT HE-615B
VENT HE-615B
VENT HE-615B
TO INSULATION PIPE BEND FLANGE B FLANGE GASKAT
SST-702
SFD-701 HOT& COLD
DRAIN 5.5 3 6 0 5
DRAIN 5.5 3 6 0 5
DRAIN 5 3 6 0 5
DRAIN 5 3 6 0 5
DRAIN 2.5 0 2 0 2
DRAIN 2.5 0 2 0 2
DRAIN 4 3 6 0 5
DRAIN 1.5 0 2 0 2
DRAIN 2.5 0 2 0 2
DRAIN 4 3 6 0 5
DRAIN 1.5 0 2 0 2
DRAIN 2.5 0 2 0 2
DRAIN 4 3 6 0 5
HTDS PIT 4 3 6 0 5
LTDS PIT 2.5 0 2 0 2
HEADER 2.5 0 2 0 2
RE-603 8 4 6 0 5
SAMPLE POINT 0.5 0 2 0 2
RC-714A 1.2 0 6 2 5
RE-603 & RE714-PP701 DISCHARGE LINE 1.2 0 6 2 5
RC-714B 3 5 12 0 10
HE-603B (VT, VAC., N2 HEADER) 3 5 12 0 10
HOSE (RE-603 BOTTOM) 10 5 5 0 3
FL-705A 6 4 6 0 5
RE-603 HEADER 6 4 6 0 5
RE-603 PROCESS HEADER 6 4 6 0 5
RE-603 (J-PIPE) 6 4 6 0 5
RE-603 PROCESS HEADER 6 4 6 0 5
RE-603 PROCESS HEADER 6 4 6 0 5
HE-603A HOT 6 2 2 0 2
HE-603B 6 2 2 0 2
PROCESS (RE-603, RC-714A & RC-714B) 6 4 6 0 5
PROCESS (RE-603, RC-714A & RC-714B) 6 4 6 0 5
RE-603 MANIFOLD (REFLUX FT) 6 4 6 0 5
RE-603 6 4 6 0 5
RC-714A 6 4 6 0 5
RC-714B 6 4 6 0 5
RC-714A & RC-714B PROCESS HEADER 6 4 6 0 5
RE714-PP701 6 4 6 0 5
RE714-PP701 PROCESS HEADER 6 4 6 0 5
RE714-PP701 PROCESS HEADER 6 4 6 0 5
SPENT SOLVENT STORAGE TANKS FOR SRP FEED 2 6 6 0 6
SPENT SOLVENT STORAGE TANKS FOR SRP FEED 2 6 6 0 6
SPENT SOLVENT STORAGE TANKS FOR DISPOSAL 2 6 6 0 6
SPENT SOLVENT STORAGE TANKS FOR DISPOSAL 2 6 6 0 6
HOSE 6 2 6 0 5
FD-708 6 2 6 0 5
RE-603 6 2 6 0 5
RE714-PP703 6 2 6 0 5
RE-715 6 2 6 0 5
ULD HOT 5.5 3 6 0 5
RE-603 SUPPLY HEADER HOT 5.5 3 6 0 5
ULD 5 3 6 0 5
ULD 5 3 6 0 5
RE-603 SUPPLY HEADER 2.5 0 2 0 2
HE-603A 2.5 0 2 0 2
ULD COLD 4 3 6 0 5
ULD COLD 1.5 0 2 0 2
ULD COLD 2.5 0 2 0 2
RE-603 SUPPLY HEADER COLD 4 3 6 0 5
HE-603A COLD 1.5 0 2 0 2
HE-603B COLD 2.5 0 2 0 2
ULD COLD 4 3 6 0 5
ULD COLD 4 3 6 0 5
RE-603 SUPPLY HEADER COLD 2.5 0 2 0 2
HE-603B COLD 2.5 0 2 0 2
RE-603 RETURN HEADER HOT & COLD 6 9 9 0 8
RE-603 RETURN HEADER HOT & COLD 0.5 0 2 0 2
RE-603 RETURN HEADER HOT & COLD 1.2 0 6 2 5
SFS-RE714-UCP701 HOT & COLD 1.2 0 6 2 5
SFS-RE714-UCP701 HOT & COLD 3 5 12 0 10
SFS-RE714-UCP701 HOT & COLD 3 5 12 0 10
RE-603 HOT & COLD 11 5 5 0 3
SFS-RE714-UCP701 (BYPASS) HOT & COLD 3 5 12 0 10
VACUUM HEADER (VP-710) 2 2 4 0 5
VACUUM HEADER (VP-710) 2 2 4 0 5
VACUUM HEADER (VP-710) 2 2 4 0 5
VACUUM HEADER (VP-710) 2 2 4 0 5
HEADER 2 2 4 0 5
SF DRAIN 0.5 2 2 0 2
KNOCKOUT VENT HEADER 0.5 2 2 0 2
ATM. 0.5 2 2 0 2
KNOCKOUT VENT HEADER 0.5 2 2 0 2
ATM. 0.5 2 2 0 2
ALKALINE SCRUBBER HEADER (SC-704) 0.5 2 2 0 2
ATM. 0.5 2 2 0 2
HEADER 0.5 2 2 0 2
HEADER 0.5 2 2 0 2
SST-702
SFD-701 HOT& COLD
DRAIN 5.5 3 6 0 5
DRAIN 5.5 3 6 0 5
DRAIN 5 3 6 0 5
DRAIN 5 3 6 0 5
DRAIN 2.5 0 2 0 2
DRAIN 2.5 0 2 0 2
DRAIN 4 3 6 0 5
DRAIN 1.5 0 2 0 2
DRAIN 2.5 0 2 0 2
DRAIN 4 3 6 0 5
DRAIN 1.5 0 2 0 2
DRAIN 2.5 0 2 0 2
DRAIN 4 3 6 0 5
HTDS PIT 4 3 6 0 5
LTDS PIT 2.5 0 2 0 2
HEADER 2.5 0 2 0 2
RE-604 8 4 6 0 5
SAMPLE POINT 0.5 0 2 0 2
RC-714A 1.2 0 6 2 5
RE-604 & RE714-PP701 DISCHARGE LINE 1.2 0 6 2 5
RC-714B 3 5 12 0 10
HE-603B (VT, VAC., N2 HEADER) 3 5 12 0 10
HOSE (RE-604 BOTTOM) 10 5 5 0 3
FL-705A 6 4 6 0 5
RE-604 HEADER 6 4 6 0 5
RE-604 PROCESS HEADER 6 4 6 0 5
RE-604 (J-PIPE) 6 4 6 0 5
RE-604 PROCESS HEADER 6 4 6 0 5
RE-604 PROCESS HEADER 6 4 6 0 5
HE-603A HOT 6 2 2 0 2
HE-603B 6 2 2 0 2
PROCESS (RE-604, RC-714A & RC-714B) 6 4 6 0 5
PROCESS (RE-604, RC-714A & RC-714B) 6 4 6 0 5
RE-604 MANIFOLD (REFLUX FT) 6 4 6 0 5
RE-604 6 4 6 0 5
RC-714A 6 4 6 0 5
RC-714B 6 4 6 0 5
RC-714A & RC-714B PROCESS HEADER 6 4 6 0 5
RE714-PP701 6 4 6 0 5
RE714-PP701 PROCESS HEADER 6 4 6 0 5
RE714-PP701 PROCESS HEADER 6 4 6 0 5
SPENT SOLVENT STORAGE TANKS FOR SRP FEED 2 6 6 0 6
SPENT SOLVENT STORAGE TANKS FOR SRP FEED 2 6 6 0 6
SPENT SOLVENT STORAGE TANKS FOR DISPOSAL 2 6 6 0 6
SPENT SOLVENT STORAGE TANKS FOR DISPOSAL 2 6 6 0 6
HOSE 6 2 6 0 5
FD-708 6 2 6 0 5
RE-604 6 2 6 0 5
RE714-PP703 6 2 6 0 5
RE-715 6 2 6 0 5
ULD HOT 5.5 3 6 0 5
RE-604 SUPPLY HEADER HOT 5.5 3 6 0 5
ULD 5 3 6 0 5
ULD 5 3 6 0 5
RE-604 SUPPLY HEADER 2.5 0 2 0 2
HE-603A 2.5 0 2 0 2
ULD COLD 4 3 6 0 5
ULD COLD 1.5 0 2 0 2
ULD COLD 2.5 0 2 0 2
RE-604 SUPPLY HEADER COLD 4 3 6 0 5
HE-603A COLD 1.5 0 2 0 2
HE-603B COLD 2.5 0 2 0 2
ULD COLD 4 3 6 0 5
ULD COLD 4 3 6 0 5
RE-604 SUPPLY HEADER COLD 2.5 0 2 0 2
HE-603B COLD 2.5 0 2 0 2
RE-604 RETURN HEADER HOT & COLD 6 9 9 0 8
RE-604 RETURN HEADER HOT & COLD 0.5 0 2 0 2
RE-604 RETURN HEADER HOT & COLD 1.2 0 6 2 5
SFS-RE714-UCP701 HOT & COLD 1.2 0 6 2 5
SFS-RE714-UCP701 HOT & COLD 3 5 12 0 10
SFS-RE714-UCP701 HOT & COLD 3 5 12 0 10
RE-604 HOT & COLD 11 5 5 0 3
SFS-RE714-UCP701 (BYPASS) HOT & COLD 3 5 12 0 10
VACUUM HEADER (VP-710) 2 2 4 0 5
VACUUM HEADER (VP-710) 2 2 4 0 5
VACUUM HEADER (VP-710) 2 2 4 0 5
VACUUM HEADER (VP-710) 2 2 4 0 5
HEADER 2 2 4 0 5
SF DRAIN 0.5 2 2 0 2
KNOCKOUT VENT HEADER 0.5 2 2 0 2
ATM. 0.5 2 2 0 2
KNOCKOUT VENT HEADER 0.5 2 2 0 2
ATM. 0.5 2 2 0 2
ALKALINE SCRUBBER HEADER (SC-704) 0.5 2 2 0 2
ATM. 0.5 2 2 0 2
HEADER 0.5 2 2 0 2
HEADER 0.5 2 2 0 2
RE-606 6 4 4 0 3
RE-606 6 4 4 0 3
RE-606 HOSE 6 2 4 0 4
RE-606 HOSE 6 2 4 0 4
RE-606 HOSE 6 2 4 0 4
RC-706A 5 2 3 0 3
RE706-PP703, 702 5 2 3 0 3
DRAIN 0.5 2 2 0 2
DRAIN 0.5 2 2 0 2
DRAIN 0.5 2 2 0 2
DRAIN 0.5 2 2 0 2
DRAIN 0.5 2 2 0 2
DRAIN 0.5 2 2 0 2
DRAIN 0.5 2 2 0 2
DRAIN 0.5 2 2 0 2
DRAIN 0.5 2 2 0 2
DRAIN 0.5 2 2 0 2
DRAIN 0.5 2 2 0 2
DRAIN 0.5 2 2 0 2
DRAIN 0.5 2 2 0 2
LTDS/HTDS/SPENT SOLVENT/ LIQUID WASH 0.5 2 2 0 2
HTDS
LTDS
HEADER 6 2 6 0 5
RE-606 6 4 4 0 3
RE-606 SAMPLE POINT 6 4 4 0 3
RC-706 & RE706-PP701 6 6 4 0 3
VACUUM LINE 2 4 6 3
RE706-ET01 6 4 4 0 3
RE-606 6 4 4 0 3
DT-701A 6 4 4 0 3
RC-706A 6 4 4 0 3
DT-702 5 2 3 0 3
MANIFOLD 5 2 3 0 3
CP-702 5 2 3 0 3
MANIFOLD 5 2 3 0 3
HEADER 5 2 3 0 3
MANIFOLD 5 2 3 0 3
MANIFOLD 5 2 3 0 3
RE-606 5 2 3 0 3
MANIFOLD 5 2 3 0 3
HEADER 6 4 4 0 3
HEADER 6 4 4 0 3
HEADER 5 2 3 0 3
RE-606 5 2 3 0 3
SAMPLE POT 5 2 3 0 3
HE-606A HOT 6 4 4 0 3
HE-606B 2 2 2 0 2
RE-606,RC-706A 5 2 3 0 3
RE-606 6 2 6 0 5
RE-606 6 2 6 0 5
RC-706A 5 2 3 0 3
RC706-PP701 2 2 2 0 2
-- 2 2 2 0 2
-- 2 2 2 0 2
OUTLET HEADER 2 2 2 0 2
CT-704A 6 4 4 0 3
CT-704B 6 4 4 0 3
FD-701 5 2 3 0 3
NF-704 5 2 3 0 3
RE-606 5 2 3 0 3
CP-702 5 2 3 0 3
RE-606
RE-606
RE706 HOT & COLD 1.2 0 6 2 5
SE705-PHE02 HOT & COLD 3 5 12 0 10
RETURN HEADER HOT & COLD 3 5 12 0 10
RE-606 HOT & COLD 6 9 9 0 8
RE-606 HOT & COLD 6 9 9 0 8
RETURN HEADER HOT & COLD 1.2 0 6 2 5
RETURN HEADER HOT & COLD 1.2 0 6 2 5
RETURN HEADER HOT & COLD 1.2 0 6 2 5
RE706-PU01 HOT & COLD 0.5 2 2 0 2
SF705-PHE01 HOT & COLD 0.5 2 2 0 2
SF706-PHE01 HOT & COLD 0.5 2 2 0 2
RETURN HEADER HOT & COLD 1.2 0 2 0 2
RE-606 SUPPLY HEADER HOT 5.5 3 6 0 5
HE-706 RETURN HEADER HOT 2.5 0 2 0 2
RE-606 SUPPLY HEADER 5 3 6 0 5
ULD 5 3 6 0 5
HE-606A SUPPLY HEADER 2.5 0 2 0 2
ULD 2.5 0 2 0 2
RE-606 SUPPLY HEADER COLD 5 3 6 0 5
ULD COLD 5 3 6 0 5
HE-606A SUPPLY HEADER COLD 2.5 0 2 0 2
ULD COLD 2.5 0 2 0 2
HE-606B SUPPLY HEADER COLD 2.5 0 2 0 2
ULD COLD 2.5 0 2 0 2
DT-702 SUPPLY HEADER COLD 5 3 6 0 5
ULD COLD 5 3 6 0 5
RE-606 SUPPLY HEADER COLD 5 3 6 0 5
ULD COLD 5 3 6 0 5
HE-606B SUPPLY HEADER COLD 2.5 0 2 0 2
ULD COLD 2.5 0 2 0 2
HEADER 6 2 6 0 5
VACUUM HEADER (CP-702) 6 2 6 0 5
VP-711 6 2 6 0 5
HEADER 6 4 4 0 3
VP-713 6 2 6 0 5
VACUUM HEADER (DT-702) 6 2 6 0 5
HE-606B 6 2 6 0 5
VP-701 6 2 6 0 5
VP-704 6 2 6 0 5
VENT(AMMONIA SCRUBBER) 0.5 2 2 0 2
ATM. 0.5 2 2 0 2
VENT(AMMONIA SCRUBBER) 0.5 2 2 0 2
TO SF DRAIN 0.5 2 2 0 2
KNOCKOUT HEADER 0.5 2 2 0 2
HEADER 0.5 2 2 0 2
KNOCKOUT HEADER 0.5 2 2 0 2
ATM. 0.5 2 2 0 2
ATM. 0.5 2 2 0 2
ATM. 0.5 2 2 0 2
VENT (ALKALINE SCRUBBER) 0.5 2 2 0 2
VENT (ACIDIC SCRUBBER) 0.5 2 2 0 2
SC-701 0.5 2 2 0 2
RE-607 6 4 4 0 3
RE-607 6 4 4 0 3
RE-607 HOSE 6 2 4 0 4
RE-607 HOSE 6 2 4 0 4
RE-607 HOSE 6 2 4 0 4
RC-706A 5 2 3 0 3
RE706-PP703, 702 5 2 3 0 3
DRAIN 0.5 2 2 0 2
DRAIN 0.5 2 2 0 2
DRAIN 0.5 2 2 0 2
DRAIN 0.5 2 2 0 2
DRAIN 0.5 2 2 0 2
DRAIN 0.5 2 2 0 2
DRAIN 0.5 2 2 0 2
DRAIN 0.5 2 2 0 2
DRAIN 0.5 2 2 0 2
DRAIN 0.5 2 2 0 2
DRAIN 0.5 2 2 0 2
DRAIN 0.5 2 2 0 2
DRAIN 0.5 2 2 0 2
LTDS/HTDS/SPENT SOLVENT/ LIQUID WASH 0.5 2 2 0 2
HTDS
LTDS
HEADER 6 2 6 0 5
RE-607 6 4 4 0 3
RE-607 SAMPLE POINT 6 4 4 0 3
RC-706 & RE706-PP701 6 6 4 0 3
VACUUM LINE 2 4 6 3
RE706-ET01 6 4 4 0 3
RE-607 6 4 4 0 3
DT-701A 6 4 4 0 3
RC-706A 6 4 4 0 3
DT-702 5 2 3 0 3
MANIFOLD 5 2 3 0 3
CP-702 5 2 3 0 3
MANIFOLD 5 2 3 0 3
HEADER 5 2 3 0 3
MANIFOLD 5 2 3 0 3
MANIFOLD 5 2 3 0 3
RE-607 5 2 3 0 3
MANIFOLD 5 2 3 0 3
HEADER 6 4 4 0 3
HEADER 6 4 4 0 3
HEADER 5 2 3 0 3
RE-607 5 2 3 0 3
SAMPLE POT 5 2 3 0 3
HE-607A HOT 6 4 4 0 3
HE-607B 2 2 2 0 2
RE-607,RC-706A 5 2 3 0 3
RE-607 6 2 6 0 5
RE-607 6 2 6 0 5
RC-706A 5 2 3 0 3
RC706-PP701 2 2 2 0 2
-- 2 2 2 0 2
-- 2 2 2 0 2
OUTLET HEADER 2 2 2 0 2
CT-704A 6 4 4 0 3
CT-704B 6 4 4 0 3
FD-701 5 2 3 0 3
NF-704 5 2 3 0 3
RE-607 5 2 3 0 3
CP-702 5 2 3 0 3
RE-607
RE-607
RE706 HOT & COLD 1.2 0 6 2 5
SE705-PHE02 HOT & COLD 3 5 12 0 10
RETURN HEADER HOT & COLD 3 5 12 0 10
RE-607 HOT & COLD 6 9 9 0 8
RE-607 HOT & COLD 6 9 9 0 8
RETURN HEADER HOT & COLD 1.2 0 6 2 5
RETURN HEADER HOT & COLD 1.2 0 6 2 5
RETURN HEADER HOT & COLD 1.2 0 6 2 5
RE706-PU01 HOT & COLD 0.5 2 2 0 2
SF705-PHE01 HOT & COLD 0.5 2 2 0 2
SF706-PHE01 HOT & COLD 0.5 2 2 0 2
RETURN HEADER HOT & COLD 1.2 0 2 0 2
RE-607 SUPPLY HEADER HOT 5.5 3 6 0 5
HE-706 RETURN HEADER HOT 2.5 0 2 0 2
RE-607 SUPPLY HEADER 5 3 6 0 5
ULD 5 3 6 0 5
HE-607A SUPPLY HEADER 2.5 0 2 0 2
ULD 2.5 0 2 0 2
RE-607 SUPPLY HEADER COLD 5 3 6 0 5
ULD COLD 5 3 6 0 5
HE-607A SUPPLY HEADER COLD 2.5 0 2 0 2
ULD COLD 2.5 0 2 0 2
HE-607B SUPPLY HEADER COLD 2.5 0 2 0 2
ULD COLD 2.5 0 2 0 2
DT-702 SUPPLY HEADER COLD 5 3 6 0 5
ULD COLD 5 3 6 0 5
RE-607 SUPPLY HEADER COLD 5 3 6 0 5
ULD COLD 5 3 6 0 5
HE-607B SUPPLY HEADER COLD 2.5 0 2 0 2
ULD COLD 2.5 0 2 0 2
HEADER 6 2 6 0 5
VACUUM HEADER (CP-702) 6 2 6 0 5
VP-711 6 2 6 0 5
HEADER 6 4 4 0 3
VP-713 6 2 6 0 5
VACUUM HEADER (DT-702) 6 2 6 0 5
HE-607B 6 2 6 0 5
VP-701 6 2 6 0 5
VP-704 6 2 6 0 5
VENT(AMMONIA SCRUBBER) 0.5 2 2 0 2
ATM. 0.5 2 2 0 2
VENT(AMMONIA SCRUBBER) 0.5 2 2 0 2
TO SF DRAIN 0.5 2 2 0 2
KNOCKOUT HEADER 0.5 2 2 0 2
HEADER 0.5 2 2 0 2
KNOCKOUT HEADER 0.5 2 2 0 2
ATM. 0.5 2 2 0 2
ATM. 0.5 2 2 0 2
ATM. 0.5 2 2 0 2
VENT (ALKALINE SCRUBBER) 0.5 2 2 0 2
VENT (ACIDIC SCRUBBER) 0.5 2 2 0 2
SC-701 0.5 2 2 0 2
RE-610 6 4 4 0 3
RE-610 6 4 4 0 3
RE-610 HOSE 6 2 4 0 4
RE-610 HOSE 6 2 4 0 4
RE-610 HOSE 6 2 4 0 4
RC-706A 5 2 3 0 3
RE706-PP703, 702 5 2 3 0 3
DRAIN 0.5 2 2 0 2
DRAIN 0.5 2 2 0 2
DRAIN 0.5 2 2 0 2
DRAIN 0.5 2 2 0 2
DRAIN 0.5 2 2 0 2
DRAIN 0.5 2 2 0 2
DRAIN 0.5 2 2 0 2
DRAIN 0.5 2 2 0 2
DRAIN 0.5 2 2 0 2
DRAIN 0.5 2 2 0 2
DRAIN 0.5 2 2 0 2
DRAIN 0.5 2 2 0 2
DRAIN 0.5 2 2 0 2
LTDS/HTDS/SPENT SOLVENT/ LIQUID WASH 0.5 2 2 0 2
HTDS
LTDS
HEADER 6 2 6 0 5
RE-610 6 4 4 0 3
RE-610 SAMPLE POINT 6 4 4 0 3
RC-706 & RE706-PP701 6 6 4 0 3
VACUUM LINE 2 4 6 3
RE706-ET01 6 4 4 0 3
RE-610 6 4 4 0 3
DT-701A 6 4 4 0 3
RC-706A 6 4 4 0 3
DT-702 5 2 3 0 3
MANIFOLD 5 2 3 0 3
CP-702 5 2 3 0 3
MANIFOLD 5 2 3 0 3
HEADER 5 2 3 0 3
MANIFOLD 5 2 3 0 3
MANIFOLD 5 2 3 0 3
RE-610 5 2 3 0 3
MANIFOLD 5 2 3 0 3
HEADER 6 4 4 0 3
HEADER 6 4 4 0 3
HEADER 5 2 3 0 3
RE-610 5 2 3 0 3
SAMPLE POT 5 2 3 0 3
HE-610A HOT 6 4 4 0 3
HE-610B 2 2 2 0 2
RE-610,RC-706A 5 2 3 0 3
RE-610 6 2 6 0 5
RE-610 6 2 6 0 5
RC-706A 5 2 3 0 3
RC706-PP701 2 2 2 0 2
-- 2 2 2 0 2
-- 2 2 2 0 2
OUTLET HEADER 2 2 2 0 2
CT-704A 6 4 4 0 3
CT-704B 6 4 4 0 3
FD-701 5 2 3 0 3
NF-704 5 2 3 0 3
RE-610 5 2 3 0 3
CP-702 5 2 3 0 3
RE-610
RE-610
RE706 HOT & COLD 1.2 0 6 2 5
SE705-PHE02 HOT & COLD 3 5 12 0 10
RETURN HEADER HOT & COLD 3 5 12 0 10
RE-610 HOT & COLD 6 9 9 0 8
RE-610 HOT & COLD 6 9 9 0 8
RETURN HEADER HOT & COLD 1.2 0 6 2 5
RETURN HEADER HOT & COLD 1.2 0 6 2 5
RETURN HEADER HOT & COLD 1.2 0 6 2 5
RE706-PU01 HOT & COLD 0.5 2 2 0 2
SF705-PHE01 HOT & COLD 0.5 2 2 0 2
SF706-PHE01 HOT & COLD 0.5 2 2 0 2
RETURN HEADER HOT & COLD 1.2 0 2 0 2
RE-610 SUPPLY HEADER HOT 5.5 3 6 0 5
HE-706 RETURN HEADER HOT 2.5 0 2 0 2
RE-610 SUPPLY HEADER 5 3 6 0 5
ULD 5 3 6 0 5
HE-610A SUPPLY HEADER 2.5 0 2 0 2
ULD 2.5 0 2 0 2
RE-610 SUPPLY HEADER COLD 5 3 6 0 5
ULD COLD 5 3 6 0 5
HE-610A SUPPLY HEADER COLD 2.5 0 2 0 2
ULD COLD 2.5 0 2 0 2
HE-610B SUPPLY HEADER COLD 2.5 0 2 0 2
ULD COLD 2.5 0 2 0 2
DT-702 SUPPLY HEADER COLD 5 3 6 0 5
ULD COLD 5 3 6 0 5
RE-610 SUPPLY HEADER COLD 5 3 6 0 5
ULD COLD 5 3 6 0 5
HE-610B SUPPLY HEADER COLD 2.5 0 2 0 2
ULD COLD 2.5 0 2 0 2
HEADER 6 2 6 0 5
VACUUM HEADER (CP-702) 6 2 6 0 5
VP-711 6 2 6 0 5
HEADER 6 4 4 0 3
VP-713 6 2 6 0 5
VACUUM HEADER (DT-702) 6 2 6 0 5
HE-610B 6 2 6 0 5
VP-701 6 2 6 0 5
VP-704 6 2 6 0 5
VENT(AMMONIA SCRUBBER) 0.5 2 2 0 2
ATM. 0.5 2 2 0 2
VENT(AMMONIA SCRUBBER) 0.5 2 2 0 2
TO SF DRAIN 0.5 2 2 0 2
KNOCKOUT HEADER 0.5 2 2 0 2
HEADER 0.5 2 2 0 2
KNOCKOUT HEADER 0.5 2 2 0 2
ATM. 0.5 2 2 0 2
ATM. 0.5 2 2 0 2
ATM. 0.5 2 2 0 2
VENT (ALKALINE SCRUBBER) 0.5 2 2 0 2
VENT (ACIDIC SCRUBBER) 0.5 2 2 0 2
SC-701 0.5 2 2 0 2
SST-702
SFD-701 HOT& COLD
DRAIN 5.5 3 6 0 5
DRAIN 5.5 3 6 0 5
DRAIN 5 3 6 0 5
DRAIN 5 3 6 0 5
DRAIN 2.5 0 2 0 2
DRAIN 2.5 0 2 0 2
DRAIN 4 3 6 0 5
DRAIN 1.5 0 2 0 2
DRAIN 2.5 0 2 0 2
DRAIN 4 3 6 0 5
DRAIN 1.5 0 2 0 2
DRAIN 2.5 0 2 0 2
DRAIN 4 3 6 0 5
HTDS PIT 4 3 6 0 5
LTDS PIT 2.5 0 2 0 2
HEADER 2.5 0 2 0 2
RE-613 8 4 6 0 5
SAMPLE POINT 0.5 0 2 0 2
RC-714A 1.2 0 6 2 5
RE-613 & RE714-PP701 DISCHARGE LINE 1.2 0 6 2 5
RC-714B 3 5 12 0 10
HE-613B (VT, VAC., N2 HEADER) 3 5 12 0 10
HOSE (RE-613 BOTTOM) 10 5 5 0 3
FL-705A 6 4 6 0 5
RE-613 HEADER 6 4 6 0 5
RE-613 PROCESS HEADER 6 4 6 0 5
RE-613 (J-PIPE) 6 4 6 0 5
RE-613 PROCESS HEADER 6 4 6 0 5
RE-613 PROCESS HEADER 6 4 6 0 5
HE-613A HOT 6 2 2 0 2
HE-613B 6 2 2 0 2
PROCESS (RE-613, RC-714A & RC-714B) 6 4 6 0 5
PROCESS (RE-613, RC-714A & RC-714B) 6 4 6 0 5
RE-613 MANIFOLD (REFLUX FT) 6 4 6 0 5
RE-613 6 4 6 0 5
RC-714A 6 4 6 0 5
RC-714B 6 4 6 0 5
RC-714A & RC-714B PROCESS HEADER 6 4 6 0 5
RE714-PP701 6 4 6 0 5
RE714-PP701 PROCESS HEADER 6 4 6 0 5
RE714-PP701 PROCESS HEADER 6 4 6 0 5
SPENT SOLVENT STORAGE TANKS FOR SRP FEED 2 6 6 0 6
SPENT SOLVENT STORAGE TANKS FOR SRP FEED 2 6 6 0 6
SPENT SOLVENT STORAGE TANKS FOR DISPOSAL 2 6 6 0 6
SPENT SOLVENT STORAGE TANKS FOR DISPOSAL 2 6 6 0 6
HOSE 6 2 6 0 5
FD-708 6 2 6 0 5
RE-613 6 2 6 0 5
RE714-PP703 6 2 6 0 5
RE-715 6 2 6 0 5
ULD HOT 5.5 3 6 0 5
RE-613 SUPPLY HEADER HOT 5.5 3 6 0 5
ULD 5 3 6 0 5
ULD 5 3 6 0 5
RE-613 SUPPLY HEADER 2.5 0 2 0 2
HE-613A 2.5 0 2 0 2
ULD COLD 4 3 6 0 5
ULD COLD 1.5 0 2 0 2
ULD COLD 2.5 0 2 0 2
RE-613 SUPPLY HEADER COLD 4 3 6 0 5
HE-613A COLD 1.5 0 2 0 2
HE-613B COLD 2.5 0 2 0 2
ULD COLD 4 3 6 0 5
ULD COLD 4 3 6 0 5
RE-613 SUPPLY HEADER COLD 2.5 0 2 0 2
HE-613B COLD 2.5 0 2 0 2
RE-613 RETURN HEADER HOT & COLD 6 9 9 0 8
RE-613 RETURN HEADER HOT & COLD 0.5 0 2 0 2
RE-613 RETURN HEADER HOT & COLD 1.2 0 6 2 5
SFS-RE714-UCP701 HOT & COLD 1.2 0 6 2 5
SFS-RE714-UCP701 HOT & COLD 3 5 12 0 10
SFS-RE714-UCP701 HOT & COLD 3 5 12 0 10
RE-613 HOT & COLD 11 5 5 0 3
SFS-RE714-UCP701 (BYPASS) HOT & COLD 3 5 12 0 10
VACUUM HEADER (VP-710) 2 2 4 0 5
VACUUM HEADER (VP-710) 2 2 4 0 5
VACUUM HEADER (VP-710) 2 2 4 0 5
VACUUM HEADER (VP-710) 2 2 4 0 5
HEADER 2 2 4 0 5
SF DRAIN 0.5 2 2 0 2
KNOCKOUT VENT HEADER 0.5 2 2 0 2
ATM. 0.5 2 2 0 2
KNOCKOUT VENT HEADER 0.5 2 2 0 2
ATM. 0.5 2 2 0 2
ALKALINE SCRUBBER HEADER (SC-704) 0.5 2 2 0 2
ATM. 0.5 2 2 0 2
HEADER 0.5 2 2 0 2
HEADER 0.5 2 2 0 2
RE-616 5 2 3 0 3
RE-616 5 2 3 0 3
DRAIN 0.5 2 2 0 2
DRAIN 0.5 2 2 0 2
DRAIN 0.5 2 2 0 2
DRAIN 0.5 2 2 0 2
LTDS/HTDS/SPENT SOLVENT 0.5 2 2 0 2
DRAIN 0.5 2 2 0 2
DRAIN 0.5 2 2 0 2
DRAIN 0.5 2 2 0 2
DRAIN 0.5 2 2 0 2
DRAIN 0.5 2 2 0 2
DRAIN 0.5 2 2 0 2
DRAIN 0.5 2 2 0 2
HTDS
LTDS
HEADER 6 2 6 0 5
RE-616 6 4 4 0 3
RC-707A 6 4 4 0 3
RC-707 & RE707-PP701 8 6 4 0 3
RC-707B 6 4 4 0 3
VACUUM LINE 2 4 6 3
RE-616 2 4 6 3
RE-616 6 4 4 0 3
HE-616A HOT 6 2 2 0 2
HE-616B 2 2 2 0 2
RE-616,RC-707A&707B 6 2 2 0 2
RE-616,RC-707A&707B 6 2 2 0 2
RE-616,RC-707A&707B 6 2 2 0 2
RE-616 6 2 2 0 2
RC-707A 5 2 3 0 3
RC-707B 5 2 3 0 3
RC-706A 5 2 3 0 3
RE707-PP701 5 2 3 0 3
RE707-PP701 5 2 3 0 3
RE707-PP701 5 2 3 0 3
SRP FEED 20 3 22 0 11
SPENT SOLVENT STORAGE TANK 20 3 22 0 11
HEADER 5 2 3 0 3
RE707-PP702 2 2 2 0 2
RE-708 5 2 3 0 3
RE-616 5 2 3 0 3
RE-616 HOT & COLD 1.2 0 6 2 5
RE-616 HOT & COLD 3 5 12 0 10
SFS-RE707-UCP701 HOT & COLD 3 5 12 0 10
RE-616 HOT & COLD 6 5 5 0 3
UTILITY RETURN HEADER HOT & COLD 6 5 5 0 3
SFS-RE707-UCP701 HOT & COLD 0.5 0 2 0 2
RETURN HEADER MANIFOLD HOT & COLD 1.2 0 6 2 5
RE-616 SUPPLY HEADER HOT 5.5 3 6 0 5
ULD HOT 5.5 3 6 0 5
RE-616 SUPPLY HEADER 5.5 3 6 0 5
ULD 5.5 3 6 0 5
HE-616A SUPPLY HEADER 2.5 0 2 0 2
ULD 2.5 0 2 0 2
RE-616 SUPPLY HEADER COLD 5.5 3 6 0 5
ULD COLD 5.5 3 6 0 5
HE-616A SUPPLY HEADER COLD 2.5 0 2 0 2
ULD COLD 2.5 0 2 0 2
HE-616B SUPPLY HEADER COLD 2.5 0 2 0 2
ULD COLD 2.5 0 2 0 2
RE-616 SUPPLY HEADER COLD 5.5 3 6 0 5
ULD COLD 5.5 3 6 0 5
HE-616B SUPPLY HEADER COLD 2.5 0 2 0 2
ULD COLD 2.5 0 2 0 2
VP-704 6 2 6 0 5
HEADER 6 2 6 0 5
RC-707A 6 2 6 0 5
RC-707B 6 2 6 0 5
ATM. 0.5 2 2 0 2
ATM. 0.5 2 2 0 2
TO SF DRAIN 0.5 2 2 0 2
KNOCKOUT HEADER 0.5 2 2 0 2
HEADER 0.5 2 2 0 2
KNOCKOUT HEADER 0.5 2 2 0 2
ATM. 0.5 2 2 0 2
VENT(ALKALINE SCRUBBER) 0.5 2 2 0 2
RE-709 5 2 3 0 3
DRAIN 0.5 2 2 0 2
DRAIN 0.5 2 2 0 2
DRAIN 0.5 2 2 0 2
DRAIN 0.5 2 2 0 2
DRAIN 0.5 2 2 0 2
LTDS/HTDS/SPENT SOLVENT 0.5 2 2 0 2
DRAIN 0.5 2 2 0 2
DRAIN 0.5 2 2 0 2
DRAIN 0.5 2 2 0 2
DRAIN 0.5 2 2 0 2
DRAIN 0.5 2 2 0 2
DRAIN 0.5 2 2 0 2
DRAIN 0.5 2 2 0 2
DRAIN 0.5 2 2 0 2
DRAIN 0.5 2 2 0 2
HTDS
LTDS
HEADER 6 2 6 0 5
RE-709 6 4 4 0 3
DT-703A 6 4 4 0 3
RC-709 & RE709-PP701 6 6 4 0 3
DT-703B 6 4 4 0 3
RE-709 6 4 4 0 3
RC-709A 6 4 4 0 3
VACUUM LINE 2 4 6 3
RE-709 6 4 4 0 3
DT-703A 6 2 4 0 4
DT-703B 6 2 4 0 4
MANIFOLD 6 2 2 0 2
MANIFOLD 6 2 2 0 2
RE-709 6 2 2 0 2
RE-709 6 2 2 0 2
SAMPLE 5 2 3 0 3
HE-709A HOT 2 2 2 0 2
HE-709B 2 2 2 0 2
RE-709,RC-709A 2 2 2 0 2
RC-709A ,RE-709 2 2 2 0 2
RE-709 2 2 2 0 2
RC-709A 2 2 2 0 2
RE709-PP701 2 2 2 0 2
SRP 20 3 22 0 11
SRP 20 3 22 0 11
HEADER 5 2 3 0 3
RE709-PP702 2 2 2 0 2
RE-710 2 2 2 0 2
RE-709 5 2 3 0 3
RE-709
ULD
RE-709 HOT & COLD 1.2 0 6 2 5
RE-709 HOT & COLD 3 5 12 0 10
SFS-RE709-UCP701 HOT & COLD 3 5 12 0 10
RE-709 HOT & COLD 6 9 9 0 8
RETURN HEADER HOT & COLD 6 9 9 0 8
SFS-RE709-UCP701 HOT & COLD 0.5 2 2 0 2
RETURN HEADER HOT & COLD 1.2 0 6 2 5
RE-709 SUPPLY HEADER HOT 5.5 3 6 0 5
RE-709 RETURN HEADER HOT 5.5 3 6 0 5
RE-709 SUPPLY HEADER 5.5 3 6 0 5
RE-709 RETURN HEADER 5.5 3 6 0 5
HE-709A SUPPLY HEADER 2.5 0 2 0 2
ULD 2.5 0 2 0 2
RE-709 SUPPLY HEADER COLD 5.5 3 6 0 5
RE-709 RETURN HEADER COLD 5.5 3 6 0 5
HE-709A SUPPLY HEADER COLD 2.5 0 2 0 2
ULD COLD 2.5 0 2 0 2
HE-709B SUPPLY HEADER COLD 2.5 0 2 0 2
ULD COLD 2.5 0 2 0 2
DT-703A SUPPLY HEADER COLD 5 2 2 0 2
ULD COLD 5 2 2 0 2
DT-703B SUPPLY HEADER COLD 5 2 2 0 2
ULD COLD 5 2 2 0 2
RE-709 SUPPLY HEADER COLD 5.5 3 6 0 5
RE-709 RETURN HEADER COLD 5.5 3 6 0 5
HE-709B SUPPLY HEADER COLD 2.5 0 2 0 2
HE-709B RETURN HEADER COLD 2.5 0 2 0 2
VP-713 6 2 6 0 5
HEADER 6 4 4 0 3
ULD 6 2 6 0 5
HEADER 6 2 6 0 5
VAC HEADER 6 2 6 0 5
VAC HEADER 5 4 4 0 3
VENT(ALKALINE SCRUBBER) 0.5 2 2 0 2
ATM. 0.5 2 2 0 2
VENT 0.5 2 2 0 2
KNOCKOUT HEADER 0.5 2 2 0 2
HEADER 0.5 2 2 0 2
KNOCKOUT HEADER 0.5 2 2 0 2
VENT(ALKALINE SCRUBBER) 0.5 2 2 0 2
ATM. 0.5 2 2 0 2
ATM. 0.5 2 2 0 2
ATM. 0.5 2 2 0 2
ATM. 0.5 2 2 0 2
SC-702 0.5 2 2 0 2
VENT(ALKALINE SCRUBBER) 0.5 2 2 0 2
RE-705 HOSE 5 2 3 0 3
DRAIN 0.5 2 2 0 2
DRAIN 0.5 2 2 0 2
DRAIN 0.5 2 2 0 2
DRAIN 0.5 2 2 0 2
DRAIN 0.5 2 2 0 2
LTDS/HTDS/SPENT SOLVENT 0.5 2 2 0 2
DRAIN 0.5 2 2 0 2
DRAIN 0.5 2 2 0 2
DRAIN 0.5 2 2 0 2
DRAIN 0.5 2 2 0 2
DRAIN 0.5 2 2 0 2
DRAIN 0.5 2 2 0 2
DRAIN 0.5 2 2 0 2
HTDS
LTDS
HEADER 6 2 6 0 5
RE-615 6 4 4 0 3
SAMPLE POINT 6 4 4 0 3
RC-705 & RE705-PP701 8 6 4 0 3
RC-705A 6 4 4 0 3
RC-705B 6 4 4 0 3
VACUUM LINE 2 4 6 3
RE-615 6 4 4 0 3
RE-615 5 2 3 0 3
OUTLET HEADER 6 2 2 0 2
MANIFOLD 6 2 2 0 2
RE-615 5 2 3 0 3
RE-615 5 2 3 0 3
RE-615 5 2 3 0 3
RE-615 5 2 3 0 3
RE-615 5 2 3 0 3
HE-615A HOT 5 2 3 0 3
HE-615B 2 2 2 0 2
RE-615,RC-705A&705B 2 2 2 0 2
RC-705A&705B 2 2 2 0 2
RE-615 2 2 2 0 2
RC-705A&704B 2 2 2 0 2
RC-705B 2 2 2 0 2
RE-615 2 2 2 0 2
RE705-PP601 2 2 2 0 2
RE705-PP601 2 2 2 0 2
RE705-PP601 2 2 2 0 2
PUMP DISCHARE 2 2 2 0 2
SPENT SOLVENT STORAGE TANK 20 3 22 0 11
RE705-PP702 2 2 2 0 2
RE-706 2 2 2 0 2
RE-615 5 2 3 0 3
RE-615 HOT & COLD 1.2 0 6 2 5
RE-615 HOT & COLD 3 5 12 0 10
SFS-RE705-UCP701 HOT & COLD 3 5 12 0 10
RE-615 HOT & COLD 6 9 9 0 8
RETURN HEADER HOT & COLD 6 9 9 0 8
SFS-RE705-UCP701 HOT & COLD 0.5 2 2 0 2
RETURN HEADER HOT & COLD 1.2 0 6 2 5
RE705 UTILITY SUPPLY HEADER HOT 5.5 3 6 0 5
ULD HOT 5.5 3 6 0 5
RE705 UTILITY SUPPLY HEADER 5.5 3 6 0 5
ULD 5.5 3 6 0 5
C 2.5 0 2 0 2
ULD 2.5 0 2 0 2
RE705 UTILITY SUPPLY HEADER COLD 5.5 3 6 0 5
ULD COLD 5.5 3 6 0 5
HE705A SUPPLY HEADER COLD 2.5 0 2 0 2
ULD COLD 2.5 0 2 0 2
HE705B SUPPLY HEADER COLD 2.5 0 2 0 2
ULD COLD 2.5 0 2 0 2
RE705 UTILITY SUPPLY HEADER COLD 5.5 3 6 0 5
ULD COLD 5.5 3 6 0 5
HE705B SUPPLY HEADER COLD 2.5 0 2 0 2
ULD COLD 2.5 0 2 0 2
HEADER 6 2 6 0 5
VP-703 HEADER 6 4 4 0 3
VP-703 HEADER 6 4 4 0 3
HEADER 6 2 6 0 5
HEADER 6 2 6 0 5
SCRUBBER 0.5 2 2 0 2
VENT 0.5 2 2 0 2
KNOCKOUT HEADER 0.5 2 2 0 2
HEADER 0.5 2 2 0 2
KNOCKOUT HEADER 0.5 2 2 0 2
ATM. 0.5 2 2 0 2
ATM. 0.5 2 2 0 2
VENT(ALKALINE SCRUBBER) 0.5 2 2 0 2
ATM. 0.5 2 2 0 2
NUTS AND BLOTS

20
20
20
20
8
8
20
8
8
20
8
8
20
20
8
8
20
8
20
20
40
40
12
20
20
20
20
20
20
16
16
20
20
20
20
20
20
20
20
20
20
24
24
24
24
20
20
20
20
20
20
20
20
20
8
8
20
8
8
20
8
8
20
20
8
8
32
8
20
20
40
40
12
40
20
20
20
20
20
8
8
8
8
8
8
8
8
8

20
20
20
20
8
8
20
8
8
20
8
8
20
20
8
8
20
8
20
20
40
40
12
20
20
20
20
20
20
16
16
20
20
20
20
20
20
20
20
20
20
24
24
24
24
20
20
20
20
20
20
20
20
20
8
8
20
8
8
20
8
8
20
20
8
8
32
8
20
20
40
40
12
40
20
20
20
20
20
8
8
8
8
8
8
8
8
8
12
12
16
16
16
12
12
8
8
8
8
8
8
8
8
8
8
8
8
8
8

20
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
8
12
20

12
8
8
8
8
12
12
12
12
12
12

20
40
40
32
32
20
20
20
8
8
8
8
20
8
20
20
8
8
20
20
8
8
8
8
20
20
20
20
8
8
20
20
20
12
20
20
20
20
20
8
8
8
8
8
8
8
8
8
8
8
8
8
12
12
16
16
16
12
12
8
8
8
8
8
8
8
8
8
8
8
8
8
8

20
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
8
12
20

12
8
8
8
8
12
12
12
12
12
12
20
40
40
32
32
20
20
20
8
8
8
8
20
8
20
20
8
8
20
20
8
8
8
8
20
20
20
20
8
8
20
20
20
12
20
20
20
20
20
8
8
8
8
8
8
8
8
8
8
8
8
8
12
12
16
16
16
12
12
8
8
8
8
8
8
8
8
8
8
8
8
8
8

20
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
8
12
20

12
8
8
8
8
12
12
12
12
12
12

20
40
40
32
32
20
20
20
8
8
8
8
20
8
20
20
8
8
20
20
8
8
8
8
20
20
20
20
8
8
20
20
20
12
20
20
20
20
20
8
8
8
8
8
8
8
8
8
8
8
8
8

20
20
20
20
8
8
20
8
8
20
8
8
20
20
8
8
20
8
20
20
40
40
12
20
20
20
20
20
20
16
16
20
20
20
20
20
20
20
20
20
20
24
24
24
24
20
20
20
20
20
20
20
20
20
8
8
20
8
8
20
8
8
20
20
8
8
32
8
20
20
40
40
12
40
20
20
20
20
20
8
8
8
8
8
8
8
8
8
12
12
8
8
8
8
8
8
8
8
8
8
8
8

20
12
12
12
12
12
12
12
16
8
16
16
16
16
12
12
12
12
12
12
32
32
12
8
12
12
20
40
40
12
12
8
20
20
20
20
20
8
8
20
20
8
8
8
8
20
20
8
8
20
20
20
20
8
8
8
8
8
8
8
8
12
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8

20
12
12
12
12
12
12
12
12
16
16
16
16
16
16
12
8
8
8
8
8
8
8
32
32
12
8
8
12

20
40
40
32
32
8
20
20
20
20
20
8
8
20
20
8
8
8
8
8
8
8
8
20
20
8
8
20
12
20
20
20
12
8
8
8
8
8
8
8
8
8
8
8
8
8
12
8
8
8
8
8
8
8
8
8
8
8
8
8

20
12
12
12
12
12
12
12
12
16
16
12
12
12
12
12
12
8
8
8
8
8
8
8
8
8
8
8
32
8
8
12
20
40
40
32
32
8
20
20
20
20
20
8
8
20
20
8
8
8
8
20
20
8
8
20
12
12
20
20
8
8
8
8
8
8
8
8
8
BLOCK NAME SERVICE SIZE MOC
GAPI UTILITY GENARATION
FROM TO INSULATION PIPE
BENDS FLG'S BLIND FLG'S GASKAT NUTS/BOLTSLOND NUTS/BOLTS
SL.NO TYPE SIZE MOC
16 HTDS-B1-114-1001-HDPE-110-OD 110-OD HDPE
17 LTDS-B1-114-1001-HDPE-110-OD 110-OD HDPE
FLUID FROM
HTDS HEADER
LTDS HEADER

0.527777777777778

3840
156
TO INSULATION PIPE BEND FLANGE B FLANGE GASKAT
HTDS PIT 4 3 6 0 5
LTDS PIT 2.5 0 2 0 2
NUTS AND BLOTS
20
8
UTILITY SERVICES

Stream
S.no Block Description SF1 SF2 SF3 SF4 Nitrogen IA BA Steam @ 7.5 bar
Description
Calculated Selected Selected Selected Selected Selected Selected Selected Selected
Pipe line Pipe line Pipe line Pipe line Pipe line Pipe line
Flow rate Heat load Pipe line Pipe line Flow rate Heat load Pipe line Flow rate Heat load Pipe line Flow rate Heat load Pipe line Flow rate Pipe line size Pipe line Flow rate Pipe line Flow rate Pipe line Flow rate Pipe line
size (In size (In size (In size (In size (In size (In
(m3/hr) (Kcal/hr) size (In size (In (m3/hr) (Kcal/hr) size (In (m3/hr) (TR) size (In (m3/hr) (TR) size (In (Nm3/hr) (In mm) size (In (CFM) size (In (CFM) size (In (Kg/hr) size (In
mm) mm) mm) mm) mm) mm)
mm) mm) mm) mm) mm) mm) mm) mm) mm)

Wing-I 70 322959 111 200 75 329277 115 200 61 87 104 150 36 51 80 80 23 39.96 50 62 86.60 80 24 53.75 50 -- -- --
1 G.API
Wing-II 55 252481 98 200 59 259483 102 100 38 55 82 150 35 49 79 80 47 57.65 50 21.4 50.78 50 24 53.75 50 -- -- --

Total 87 575441 124 250 134 588760 154 200 99 141 133 150 71 100 112 100 70 70.14 80 84 76.98 80 48 58.28 80 1174 86 100
Cooling water

Selected
Pipe line
Flow rate Flow rate Pipe line
size (In
(m3/hr) (TR) size (In
mm)
mm)

-- -- -- --

-- -- -- --

118 195 144 200


SF1 ESTIMATION FOR WING-I (TRAZADONE, MOTOPROLOL SUCCINATE,RIVAROXABAN)

S NO. TAG No. EQUIPMENT DESCRIPTION CAPACITY MOC HTA Heat load SF-I Flow rate Remarks

Equipments @ intermediate area (i.e piperack @ 15.5 m lvl)

1 RE-601 Glass Lined Reactor 6.3 KL MSGL 18.00 157705 34.17

2 RE-602 Glass Lined Reactor 6.3 KL MSGL 18.00 157705 34.17

3 RE-603 Stainless Steel Reactor 3.5 KL SS316 10.38 109139 23.64

4 RE-604 Stainless Steel Reactor 3.5 KL SS316 10.38 109139 23.64

5 RE-605 Glass Lined Reactor 3 KL MSGL 9.37 82067 17.78

6 RE-606 Stainless Steel Reactor 4.5 KL SS316 12.27 129045 27.96

7 RE-607 Stainless Steel Reactor 4.5 KL SS316 12.27 129045 27.96

8 RE-608 Stainless Steel Reactor 4 KL SS316 11.35 119300 25.85

SUB TOTAL 215.15

DIVERSITY 30%

Total Flow rate with Diversity @ intermediate (A) 64.55

Clean room reactors

9 RE-609 Stainless Steel Reactor 6 KL SS316 14.87 156327 33.87

10 RE-610 Stainless Steel Reactor 4 KL SS316 11.35 119300 25.85

11 RE-611 Glass Lined Reactor 4 KL MSGL 11.35 99417 21.54

SUB TOTAL 81.25

DIVERSITY maximum one

Total Flow rate with Diversity (A) 33.87

Total flow rate for pipelines below 11.0 m Lvl 98.41

Piperack @ below 6.0 m lvl

DRYERS FOR INTERMEDIATE AREA (CONTINUOUS AREA)

12 VTD-601 Vacuum Tray Dryer 96 Trays SS316 NA 64125 13.89

13 VTD-602 Vacuum Tray Dryer 96 Trays SS316 NA 64125 13.89

14 RD-601 Rotacone vacuum tray dryer 1.5 KL MSGL NA 14080 3.05

15 FBD-601 Fluidized bed dryer with blower 300 Kg SS316 NA 5280 1.14

16 FBD-602 Fluidized bed dryer with blower 300 Kg SS316 NA 5280 1.14

17 RD-602 Rotacone vacuum tray dryer 2 KL SS316 NA 14080 3.05

18 FD-601 ANFD with recevier and condenser 1.6 KL SS316 NA 7582 1.64

19 RD-603 Rotacone vacuum tray dryer 1.5 KL SS316 NA 14080 3.05

SUB TOTAL 40.87

maximum one TD + REST


DIVERSITY
DRYERS WORKING AT TIME

Flow rate with Diversity (B) 26.97

Total Flow rate (A+B) 60.84

Safety Margin (15%) 69.97


SF2 ESTIMATION FOR WING-I (TRAZADONE, MOTOPROLOL SUCCINATE,RIVAROXABAN)

S NO. TAG No. EQUIPMENT DESCRIPTION CAPACITY MOC HTA Heat load SF-2 Flow rate Remarks

Equipments @ intermediate area (i.e piperack @ 15.5 m lvl)

1 RE-601 Glass Lined Reactor 6.3 KL MSGL 18.00 163247 37.28

2 RE-602 Glass Lined Reactor 6.3 KL MSGL 18.00 163247 37.28

3 RE-603 Stainless Steel Reactor 3.5 KL SS316 10.38 112974 25.80

4 RE-604 Stainless Steel Reactor 3.5 KL SS316 10.38 112974 25.80

5 RE-605 Glass Lined Reactor 3 KL MSGL 9.37 84950 19.40

6 RE-606 Stainless Steel Reactor 4.5 KL SS316 12.27 133580 30.50

7 RE-607 Stainless Steel Reactor 4.5 KL SS316 12.27 133580 30.50

8 RE-608 Stainless Steel Reactor 4 KL SS316 11.35 123492 28.20

SUB TOTAL 234.76

DIVERSITY 35%

Total Flow rate with Diversity @ intermediate (A) 82.17

CLEAN ROOM AREA REACTORS

9 RE-609 Stainless Steel Reactor 6 KL SS316 14.87 161821 36.95

10 RE-610 Stainless Steel Reactor 4 KL SS316 11.35 123492 28.20

11 RE-611 Glass Lined Reactor 4 KL MSGL 11.35 99417 22.70

SUB TOTAL 639.89

DIVERSITY maximum one

Total Flow rate with Diversity (A) 36.95

Total flow rate for pipelines below 11.0 m Lvl 119.12

Piperack @ below 6.0 m lvl

DRYERS FOR INTERMEDIATE AREA (CONTINUOUS AREA & Intermediate area)

12 VTD-601 Vacuum Tray Dryer 96 Trays SS316 NA 64125 14.64

13 VTD-602 Vacuum Tray Dryer 96 Trays SS316 NA 64125 14.64

14 RD-601 Rotacone vacuum tray dryer 1.5 KL MSGL NA 14080 3.22

15 FBD-601 Fluidized bed dryer with blower 300 Kg SS316 NA 5280 1.21

16 FBD-602 Fluidized bed dryer with blower 300 Kg SS316 NA 5280 1.21

17 RD-602 Rotacone vacuum tray dryer 2 KL SS316 NA 14080 3.22

18 FD-601 ANFD with recevier and condenser 1.6 KL SS316 NA 7582 1.73

19 RD-603 Rotacone vacuum tray dryer 1.5 KL SS316 NA 14080 3.22

SUB TOTAL 43.08

maximum one TD + REST


DIVERSITY
DRYERS WORKING AT TIME

Flow rate with Diversity (B) 28.43

Total Flow rate (A+B) 65.38

Safety Margin (15%) 75.19


SF3 ESTIMATION FOR WING-I (TRAZADONE, MOTOPROLOL SUCCINATE,RIVAROXABAN)

S NO. TAG No. EQUIPMENT DESCRIPTION CAPACITY MOC HTA Heat load SF-3 Flow rate Remarks

Equipments @ intermediate area (i.e piperack @ 15.5 m lvl)

1 RE-601 Glass Lined Reactor 6.3 KL MSGL 18.00 104882 24.36

2 RE-602 Glass Lined Reactor 6.3 KL MSGL 18.00 104882 24.36

3 RE-603 Stainless Steel Reactor 3.5 KL SS316 10.38 72583 16.86

4 RE-604 Stainless Steel Reactor 3.5 KL SS316 10.38 72583 16.86

5 RE-605 Glass Lined Reactor 3 KL MSGL 9.37 54578 12.68

6 RE-606 Stainless Steel Reactor 4.5 KL SS316 12.27 85821 19.93

7 RE-607 Stainless Steel Reactor 4.5 KL SS316 12.27 85821 19.93

8 RE-608 Stainless Steel Reactor 4 KL SS316 11.35 79340 18.43

SUB TOTAL 153.39

DIVERSITY 20%

Total Flow rate with Diversity @ intermediate (A) 30.68

CLEAN ROOM AREA REACTORS

9 RE-609 Stainless Steel Reactor 6 KL SS316 14.87 103965 24.15

10 RE-610 Stainless Steel Reactor 4 KL SS316 11.35 79340 18.43

11 RE-611 Glass Lined Reactor 4 KL MSGL 11.35 66117 15.36

SUB TOTAL 57.93

DIVERSITY maximum one

Total Flow rate with Diversity (A) 24.15

Piperack @ below 6.0 m lvl

DRYERS FOR INTERMEDIATE AREA (CONTINUOUS AREA)

12 VTD-601 Vacuum Tray Dryer 96 Trays SS316 NA 64125 14.89

13 VTD-602 Vacuum Tray Dryer 96 Trays SS316 NA 64125 14.89

14 RD-601 Rotacone vacuum tray dryer 1.5 KL MSGL NA 14080 3.27

15 FBD-601 Fluidized bed dryer with blower 300 Kg SS316 NA 5280 1.23

16 FBD-602 Fluidized bed dryer with blower 300 Kg SS316 NA 5280 1.23

17 RD-602 Rotacone vacuum tray dryer 2 KL SS316 NA 14080 3.27

18 FD-601 ANFD with recevier and condenser 1.6 KL SS316 NA 7582 1.76

19 RD-603 Rotacone vacuum tray dryer 1.5 KL SS316 NA 14080 3.27

SUB TOTAL 43.81

maximum one TD + REST


DIVERSITY
DRYERS WORKING AT TIME

Flow rate with Diversity (B) 28.92

Total Flow rate (A+B) 53.06

Safety Margin (15%) 61.02


COMPLETE UTILTY SUMMARY FOR GAPI
(INCLUDING GENERATION & DISTRIBUTION)

Generation Distribution

Utility service Required Heat load Heat exchanger/ chiller Pumps Header sizes Remarks

Calculated Heat Calculated Calculated Suction


load Considered heat load m2/TR/Nm3/hr/CFM flow Selected flow rate for pumps header Selected Suction header Calculated discharge header Selected discharge header
(Kcal/hr) (Kcal/hr) (m3/hr) (In mm) (in mm) (In mm) (in mm)

150 m3/hr x 3 nos


SF-1 @ 130 deg C 941434 988505 TBD 214 (2 w+1 std) 275 300 195 200

150 m3/hr x 3 nos


SF-2 @ 32 deg C 1045052 1097304 TBD 238 (2 w+1 std) 290 350 205 250

Primary pumps:100 m3/hr X 30 mlc @ 3 nos


SF-3 @ 10 deg C 591091 620645 256 TR chiller is required 144 (2 w+1 std) 226 250 160 200
Secondary pumps:100 m3/hr X --mlc @ 3 nos
(2 w+1 std)

SF-4 @ -20 deg C 301757 316845 75 TR chiller is required 75 Primary pumps:30 m3/hr X 30 mlc @ 3 nos 162 150 115 100
(2 w+1 std)
Secondary pumps:30 m3/hr X --mlc @ 3 nos
(2 w+1 std)

Nitrogen 70 50 Nm3/hr 50 Nm3/hr N2 plant is NA NA 80


required

Instrument air 84 100 CFM 100 CFM air compressor with NA NA 80


Dryer skid is required

Breathing Air 48 50 CFM 50 CFM air compressor with NA NA 80


Dryer skid is required

Steam 1921 2500 Kg/hr 2500 Kg/hr @ 7.5 bar is NA NA 100


required

Cooling Water 209 1045052 400 TR Cooling tower is NA NA 200


required.
UTILITY SERVICES

Stream
S.no Block Description SF1 SF2 SF3 SF4 Nitrogen IA BA Steam @ 7.5 bar
Description
Calculated Selected Selected Selected Selected Selected Selected Selected Selected
Pipe line Pipe line Pipe line Pipe line Pipe line Pipe line
Flow rate Heat load Pipe line Pipe line Flow rate Heat load Pipe line Flow rate Heat load Pipe line Flow rate Heat load Pipe line Flow rate Pipe line size Pipe line Flow rate Pipe line Flow rate Pipe line Flow rate Pipe line
size (In size (In size (In size (In size (In size (In
(m3/hr) (Kcal/hr) size (In size (In (m3/hr) (Kcal/hr) size (In (m3/hr) (TR) size (In (m3/hr) (TR) size (In (Nm3/hr) (In mm) size (In (CFM) size (In (CFM) size (In (Kg/hr) size (In
mm) mm) mm) mm) mm) mm)
mm) mm) mm) mm) mm) mm) mm) mm) mm)

Wing-I 149 688952 163 200 179 785569 178 200 99 141 132 150 36 51 80 80 23 39.96 50 62 86.60 80 24 53.75 50 -- -- --
1 G.API
Wing-II 55 252481 98 200 59 259483 102 100 38 55 82 150 35 49 79 80 47 57.65 50 21.4 50.78 50 24 53.75 50 -- -- --

Total 143 941434 159 250 239 1045052 205 200 137 195 156 150 71 100 112 100 70 70.14 80 84 76.98 80 48 58.28 80 1921 86 100
Cooling water

Selected
Pipe line
Flow rate Flow rate Pipe line
size (In
(m3/hr) (TR) size (In
mm)
mm)

-- -- -- --

-- -- -- --

209 346 192 200


SF1 ESTIMATION FOR WING-I (TRAZADONE, MOTOPROLOL SUCCINATE,RIVAROXABAN)

S NO. TAG No. EQUIPMENT DESCRIPTION CAPACITY MOC HTA Heat load SF-I Flow rate Remarks

Equipments @ intermediate area (i.e piperack @ 15.5 m lvl)

1 RE-601 Glass Lined Reactor 6.3 KL MSGL 18.00 157705 34.17

2 RE-602 Glass Lined Reactor 6.3 KL MSGL 18.00 157705 34.17

3 RE-603 Stainless Steel Reactor 3.5 KL SS316 10.38 109139 23.64

4 RE-604 Stainless Steel Reactor 3.5 KL SS316 10.38 109139 23.64

5 RE-605 Glass Lined Reactor 3 KL MSGL 9.37 82067 17.78

6 RE-606 Stainless Steel Reactor 4.5 KL SS316 12.27 129045 27.96

7 RE-607 Stainless Steel Reactor 4.5 KL SS316 12.27 129045 27.96

8 RE-608 Stainless Steel Reactor 4 KL SS316 11.35 119300 25.85

9 RE-609 Stainless Steel Reactor 6 KL SS316 14.87 156327 33.87

10 RE-610 Stainless Steel Reactor 4 KL SS316 11.35 119300 25.85

11 RE-611 Glass Lined Reactor 4 KL MSGL 11.35 99417 21.54

SUB TOTAL 296.40

DIVERSITY 30%

Total Flow rate with Diversity (A) 88.92 125.69930414

Piperack @ below 6.0 m lvl

DRYERS FOR INTERMEDIATE AREA (CONTINUOUS AREA)

12 VTD-601 Vacuum Tray Dryer 96 Trays SS316 NA 64125 13.89

13 VTD-602 Vacuum Tray Dryer 96 Trays SS316 NA 64125 13.89

14 RD-601 Rotacone vacuum tray dryer 1.5 KL MSGL NA 14080 3.05

15 FBD-601 Fluidized bed dryer with blower 300 Kg SS316 NA 5280 1.14

16 FBD-602 Fluidized bed dryer with blower 300 Kg SS316 NA 5280 1.14

17 RD-602 Rotacone vacuum tray dryer 2 KL SS316 NA 14080 3.05

18 FD-601 ANFD with recevier and condenser 1.6 KL SS316 NA 7582 1.64

19 RD-603 Rotacone vacuum tray dryer 1.5 KL SS316 NA 14080 3.05

SUB TOTAL 40.87

DIVERSITY 100%

Flow rate with Diversity (B) 40.87

Total Flow rate (A+B) 129.79

Safety Margin (15%) 149.25


SF2 ESTIMATION FOR WING-I (TRAZADONE, MOTOPROLOL SUCCINATE,RIVAROXABAN)

S NO. TAG No. EQUIPMENT DESCRIPTION CAPACITY MOC HTA Heat load SF-2 Flow rate Remarks

Equipments @ intermediate area (i.e piperack @ 15.5 m lvl)

1 RE-601 Glass Lined Reactor 6.3 KL MSGL 18.00 163247 37.28

2 RE-602 Glass Lined Reactor 6.3 KL MSGL 18.00 163247 37.28

3 RE-603 Stainless Steel Reactor 3.5 KL SS316 10.38 112974 25.80

4 RE-604 Stainless Steel Reactor 3.5 KL SS316 10.38 112974 25.80

5 RE-605 Glass Lined Reactor 3 KL MSGL 9.37 84950 19.40

6 RE-606 Stainless Steel Reactor 4.5 KL SS316 12.27 133580 30.50

7 RE-607 Stainless Steel Reactor 4.5 KL SS316 12.27 133580 30.50

8 RE-608 Stainless Steel Reactor 4 KL SS316 11.35 123492 28.20

9 RE-609 Stainless Steel Reactor 6 KL SS316 14.87 161821 36.95

10 RE-610 Stainless Steel Reactor 4 KL SS316 11.35 123492 28.20

11 RE-611 Glass Lined Reactor 4 KL MSGL 11.35 99417 22.70

SUB TOTAL 322.62

DIVERSITY 35%

Total Flow rate with Diversity (A) 112.92

Piperack @ below 6.0 m lvl

DRYERS FOR INTERMEDIATE AREA (CONTINUOUS AREA)

12 VTD-601 Vacuum Tray Dryer 96 Trays SS316 NA 64125 14.64

13 VTD-602 Vacuum Tray Dryer 96 Trays SS316 NA 64125 14.64

14 RD-601 Rotacone vacuum tray dryer 1.5 KL MSGL NA 14080 3.22

15 FBD-601 Fluidized bed dryer with blower 300 Kg SS316 NA 5280 1.21

16 FBD-602 Fluidized bed dryer with blower 300 Kg SS316 NA 5280 1.21

17 RD-602 Rotacone vacuum tray dryer 2 KL SS316 NA 14080 3.22

18 FD-601 ANFD with recevier and condenser 1.6 KL SS316 NA 7582 1.73

19 RD-603 Rotacone vacuum tray dryer 1.5 KL SS316 NA 14080 3.22

SUB TOTAL 43.08

DIVERSITY 100%

Flow rate with Diversity (B) 43.08

Total Flow rate (A+B) 155.99

Safety Margin (15%) 179.39


SF3 ESTIMATION FOR WING-I (TRAZADONE, MOTOPROLOL SUCCINATE,RIVAROXABAN)

S NO. TAG No. EQUIPMENT DESCRIPTION CAPACITY MOC HTA Heat load SF-3 Flow rate Remarks

Equipments @ intermediate area (i.e piperack @ 15.5 m lvl)

1 RE-601 Glass Lined Reactor 6.3 KL MSGL 18.00 104882 24.36

2 RE-602 Glass Lined Reactor 6.3 KL MSGL 18.00 104882 24.36

3 RE-603 Stainless Steel Reactor 3.5 KL SS316 10.38 72583 16.86

4 RE-604 Stainless Steel Reactor 3.5 KL SS316 10.38 72583 16.86

5 RE-605 Glass Lined Reactor 3 KL MSGL 9.37 54578 12.68

6 RE-606 Stainless Steel Reactor 4.5 KL SS316 12.27 85821 19.93

7 RE-607 Stainless Steel Reactor 4.5 KL SS316 12.27 85821 19.93

8 RE-608 Stainless Steel Reactor 4 KL SS316 11.35 79340 18.43

9 RE-609 Stainless Steel Reactor 6 KL SS316 14.87 103965 24.15

10 RE-610 Stainless Steel Reactor 4 KL SS316 11.35 79340 18.43

11 RE-611 Glass Lined Reactor 4 KL MSGL 11.35 66117 15.36

SUB TOTAL 211.32

DIVERSITY 20%

Total Flow rate with Diversity (A) 42.26

Piperack @ below 6.0 m lvl

DRYERS FOR INTERMEDIATE AREA (CONTINUOUS AREA)

12 VTD-601 Vacuum Tray Dryer 96 Trays SS316 NA 64125 14.89

13 VTD-602 Vacuum Tray Dryer 96 Trays SS316 NA 64125 14.89

14 RD-601 Rotacone vacuum tray dryer 1.5 KL MSGL NA 14080 3.27

15 FBD-601 Fluidized bed dryer with blower 300 Kg SS316 NA 5280 1.23

16 FBD-602 Fluidized bed dryer with blower 300 Kg SS316 NA 5280 1.23

17 RD-602 Rotacone vacuum tray dryer 2 KL SS316 NA 14080 3.27

18 FD-601 ANFD with recevier and condenser 1.6 KL SS316 NA 7582 1.76

19 RD-603 Rotacone vacuum tray dryer 1.5 KL SS316 NA 14080 3.27

SUB TOTAL 43.81

DIVERSITY 100%

Flow rate with Diversity (B) 43.81

Total Flow rate (A+B) 86.07

Safety Margin (15%) 98.98


SF4 ESTIMATION FOR WING-I (TRAZADONE, MOTOPROLOL SUCCINATE,RIVAROXABAN)

S NO. TAG No. EQUIPMENT DESCRIPTION CAPACITY MOC HTA Heat load SF-4 Flow rate Remarks

Equipments @ intermediate area (i.e piperack @ 15.5 m lvl)

1 RE-601 Glass Lined Reactor 6.3 KL MSGL 18.00 97382 22.91

2 RE-602 Glass Lined Reactor 6.3 KL MSGL 18.00 97382 22.91

3 RE-603 Stainless Steel Reactor 3.5 KL SS316 10.38 67392 15.85

4 RE-604 Stainless Steel Reactor 3.5 KL SS316 10.38 67392 15.85

5 RE-605 Glass Lined Reactor 3 KL MSGL 9.37 50675 11.92

6 RE-606 Stainless Steel Reactor 4.5 KL SS316 12.27 79684 18.74

7 RE-607 Stainless Steel Reactor 4.5 KL SS316 12.27 79684 18.74

8 RE-608 Stainless Steel Reactor 4 KL SS316 11.35 73667 17.33

SUB TOTAL 144.26

DIVERSITY 15%

Total Flow rate with Diversity @ intermediate (A) 21.64

CLEAN ROOM AREA REACTORS

9 RE-609 Stainless Steel Reactor 6 KL SS316 14.87 96531 22.71

10 RE-610 Stainless Steel Reactor 4 KL SS316 11.35 73667 17.33

11 RE-611 Glass Lined Reactor 4 KL MSGL 11.35 61389 14.44

SUB TOTAL 54.48

DIVERSITY Maximum one

Total Flow rate with Diversity (A) 22.71

Piperack @ below 6.0 m lvl

DRYERS FOR INTERMEDIATE AREA (CONTINUOUS AREA)

12 VTD-601 Vacuum Tray Dryer 96 Trays SS316 NA 64125 1.51

13 VTD-602 Vacuum Tray Dryer 96 Trays SS316 NA 64125 1.51

14 RD-601 Rotacone vacuum tray dryer 1.5 KL MSGL NA 14080 3.31

15 FBD-601 Fluidized bed dryer with blower 300 Kg SS316 NA 5280 1.24

16 FBD-602 Fluidized bed dryer with blower 300 Kg SS316 NA 5280 1.24

17 RD-602 Rotacone vacuum tray dryer 2 KL SS316 NA 14080 3.31

18 FD-601 ANFD with recevier and condenser 1.6 KL SS316 NA 7582 1.78

19 RD-603 Rotacone vacuum tray dryer 1.5 KL SS316 NA 14080 3.31

SUB TOTAL 17.22

DIVERSITY 50%

Total Flow rate with Diversity (A) 8.61

Total Flow rate (A+B) 31.32

Safety Margin (15%) 36.02


SF1 SF2 SF3 SF4
S.NO equipment description
Phase 1 Phase 2 Phase-3 Phase 1 Phase 2 Phase-3 Phase 1 Phase 2 Phase-3 Phase 1 Phase 2 Phase-3
additional One No. existings HE after
One No. of 192 m2
1 Heat Exchangers Existing sufficient Existing sufficient Existing sufficient of 192 m2 to be phase -2 is NA NA NA NA NA NA
to be added
added sufficient

1. additional one No of
1. one No of 300 m3/hr @60 300 m3/hr @60 mlc to be
2 No.s
additional 1 No. existings pumps existings pumps mlc to be added existings pumps added
1 No. 300m3/hr@ 300m3/hr @ 60mlc Existing setup is Existing setup is Existing setup is
2 Pumps existing are sufficient 300m3/hr@ 60mlc after phase -1 is after phase -1 is 2. one No of 300 m3/hr @20 after phase -1 is 2. additional one No of
60mlc to be added to be added sufficient sufficient sufficient
to be added sufficient sufficient mlc to be added sufficient 300 m3/hr @20 mlc to be
added

Existing chiller after Existing chiller after Existing setup is Existing setup is Existing setup is
3 Chillers NA NA NA NA NA NA 850 TR Chiller to be added
phase -1 is sufficient phase -1 is sufficient sufficient sufficient sufficient
SRS UTILITY REQUIREMENT

STEAM COOLING TOWER


Phases REQUIRED required Flow CALCULATED LINE SIZE
FLOWRATE GENERATION DISTRIBUTION LINE SIZE REQUIRED Rates GENERATION (m3/hr) EXISTING LINE SIZE PROPOSED LINE SIZE
REQUIRED
(KG/HR) (m3/hr)

Existing requirement 290 AVAILABLE AVAILABLE 26 1200 150 68 250


(MPP+FILING)

Proposed requirement TO BE VERIFIED FOR


PRS SIZE TO BE
(STREAM1, STREAM2,MPP & 2285 AVAILABLE EXISTING & 213 1200 150 195 250
VERIFIED
FILING) PROPOSED(STREAM1&2)

Proposed requirement
(STREAM1, STREAM2,MPP , 3200 AVAILABLE TO BE CHECKED --- 299 1200 150 230 250
FILING & ASSUMED STREAM 3)

ASSUMED DIVERSITY 80% ON 2560 AVAILABLE AVAILABLE 239.2 1200 150 206.163005604788 250
THE TOTAL REQUIREMENT

NOTE:

EXISTING PRS CAPACITIES TO BE VERIFIED


SRS UTILITY REQUIREMENT

STEAM COOLING TOWER


Phases REQUIRED required Flow CALCULATED LINE SIZE
FLOWRATE GENERATION DISTRIBUTION LINE SIZE REQUIRED Rates GENERATION (m3/hr) EXISTING LINE SIZE PROPOSED LINE SIZE
REQUIRED
(KG/HR) (m3/hr)

Existing requirement 290 AVAILABLE AVAILABLE 26 1200 150 68 250


(MPP+FILING)

Proposed requirement TO BE VERIFIED FOR


PRS SIZE TO BE
(STREAM1, STREAM2,MPP & 2285 AVAILABLE EXISTING & 213 1200 150 195 250
VERIFIED
FILING) PROPOSED(STREAM1&2)

Proposed requirement
(STREAM1, STREAM2,MPP , 3200 AVAILABLE TO BE CHECKED --- 299 1200 150 230 250
FILING & ASSUMED STREAM 3)

ASSUMED DIVERSITY 80% ON 2560 AVAILABLE AVAILABLE 239.2 1200 150 206.163005604788 250
THE TOTAL REQUIREMENT

NOTE:

EXISTING PRS CAPACITIES TO BE VERIFIED


SRS UTILITY REQUIREMENT

STEAM COOLING TOWER


Phases REQUIRED required Flow CALCULATED LINE SIZE
FLOWRATE GENERATION DISTRIBUTION LINE SIZE REQUIRED Rates GENERATION (m3/hr) EXISTING LINE SIZE PROPOSED LINE SIZE
REQUIRED
(KG/HR) (m3/hr)

Existing requirement 290 AVAILABLE AVAILABLE 26 1200 150 68 250


(MPP+FILING)

Proposed requirement TO BE VERIFIED FOR


PRS SIZE TO BE
(STREAM1, STREAM2,MPP & 2285 AVAILABLE EXISTING & 213 1200 150 195 250
VERIFIED
FILING) PROPOSED(STREAM1&2)

Proposed requirement
(STREAM1, STREAM2,MPP , 3200 AVAILABLE TO BE CHECKED --- 299 1200 150 230 250
FILING & ASSUMED STREAM 3)

ASSUMED DIVERSITY 80% ON 2560 AVAILABLE AVAILABLE 239.2 1200 150 206.163005604788 250
THE TOTAL REQUIREMENT

NOTE:

EXISTING PRS CAPACITIES TO BE VERIFIED


SF-II ESTIMATION FOR WING-II (PREGABLIN)

S NO. TAG No. EQUIPMENT DESCRIPTION CAPACITY MOC HTA Heat load SF-II Flow rate Remarks

Piperack @ 15.5 m lvl

1 RE-613 Stainless Steel Reactor 2 KL SS316 7.15 75154 16.28SS Type Secondary Condenser

2 RE-614 Glass Lined Reactor 3 KL MSGL 9.37 98480 21.33 Sparkler filter

3 RE-future Stainless Steel Reactor 6.5 KL SS316 15.68 164896 35.72 Reactor Vacuum pump

4 RE-future Stainless Steel Reactor 7 KL SS316 16.48 173247 37.53 Reactor Vacuum pump

5 RE-future Stainless Steel Reactor 7 KL SS316 16.48 173247 37.53 Reactor Vacuum pump

6 RE-future Stainless Steel Reactor 7 KL SS316 16.48 173247 37.53 Reactor Vacuum pump

7 RE-future Stainless Steel Reactor 7 KL SS316 16.48 173247 37.53 Reactor Vacuum pump

8 RE-future Stainless Steel Reactor 7 KL SS316 16.48 173247 37.53 Reactor Vacuum pump

9 RE-future Stainless Steel Reactor 7 KL SS316 16.48 173247 37.53 Reactor Vacuum pump

10 RE-future Stainless Steel Reactor 7 KL SS316 16.48 173247 37.53 Reactor Vacuum pump

SUB TOTAL 336.06

DIVERSITY 30%

Total Flow rate with Diversity @ intermediate (A) 100.82

Clean room reactors

11 RE-615 Stainless Steel Reactor 7 KL SS316 16.48 173247 37.53 Reactor Vacuum pump

12 RE-616 Stainless Steel Reactor 7 KL SS316 16.48 173247 37.53 Reactor Vacuum pump

13 RE-future Stainless Steel Reactor 7 KL SS316 16.48 173247 37.53 Reactor Vacuum pump

SUB TOTAL 112.60

DIVERSITY maximum one

Total Flow rate with Diversity (A) 37.53

Piperack @ below 6.0 m lvl

DRYERS (CONTINUOUS )

5 RD-605 Rotacone vacuum tray dryer 2 KL SS316 14080 3.05

6 RD-604 Rotacone vacuum tray dryer 2 KL SS316 14080 3.05

7 FD-601 ANFD with recevier and condenser 1.6 KL SS316 NA 7582 1.64

8 FBD-601 Fluidized bed dryer with blower 300 Kg SS316 NA 5280 1.14

9 FBD-602 Fluidized bed dryer with blower 300 Kg SS316 NA 5280 1.14

SUB TOTAL 10.03

DIVERSITY 100%

Flow rate with Diversity (B) 10.03

Total Flow rate (A+B) 47.56

Safety Margin (15%) 54.70


SF-II ESTIMATION FOR WING-II (PREGABLIN)

S NO. TAG No. EQUIPMENT DESCRIPTION CAPACITY MOC HTA Heat load SF-II Flow rate Remarks

Piperack @ 15.5 m lvl

1 RE-613 Stainless Steel Reactor 2 KL SS316 7.15 77795 17.77SS Type Secondary Condenser

2 RE-614 Glass Lined Reactor 3 KL MSGL 9.37 101941 23.28 Sparkler filter

3 RE-future Stainless Steel Reactor 6.5 KL SS316 15.68 170690 38.98 Reactor Vacuum pump

4 RE-future Stainless Steel Reactor 7 KL SS316 16.48 179335 40.95 Reactor Vacuum pump

5 RE-future Stainless Steel Reactor 7 KL SS316 16.48 179335 40.95

6 RE-future Stainless Steel Reactor 7 KL SS316 16.48 179335 40.95

7 RE-future Stainless Steel Reactor 7 KL SS316 16.48 179335 40.95

8 RE-future Stainless Steel Reactor 7 KL SS316 16.48 179335 40.95

9 RE-future Stainless Steel Reactor 7 KL SS316 16.48 179335 40.95

10 RE-future Stainless Steel Reactor 7 KL SS316 16.48 179335 40.95

SUB TOTAL 366.69

DIVERSITY 35%

Total Flow rate with Diversity @ intermediate (A) 128.34

Clean room reactors

11 RE-615 Stainless Steel Reactor 7 KL SS316 16.48 179335 40.95

12 RE-616 Stainless Steel Reactor 7 KL SS316 16.48 179335 40.95

13 RE-future Stainless Steel Reactor 7 KL SS316 16.48 179335 40.95

SUB TOTAL 122.86

DIVERSITY maximum one

Total Flow rate with Diversity (A) 40.95

Piperack @ below 6.0 m lvl

DRYERS (CONTINUOUS )

5 RD-605 Rotacone vacuum tray dryer 2 KL SS316 14080 3.22

6 RD-604 Rotacone vacuum tray dryer 2 KL SS316 14080 3.22

7 FD-601 ANFD with recevier and condenser 1.6 KL SS316 NA 7582 1.73

8 FBD-601 Fluidized bed dryer with blower 300 Kg SS316 NA 5280 1.21

9 FBD-602 Fluidized bed dryer with blower 300 Kg SS316 NA 5280 1.21

SUB TOTAL 10.57

DIVERSITY 100%

Flow rate with Diversity (B) 10.57

Total Flow rate (A+B) 51.53

Safety Margin (15%) 59.25


SF-III ESTIMATION FOR WING-II (PREGABLIN)

S NO. TAG No. EQUIPMENT DESCRIPTION CAPACITY MOC HTA Heat load SF-III Flow rate Remarks

Piperack @ 15.5 m lvl

1 RE-613 Stainless Steel Reactor 2 KL SS316 7.15 49981 11.61SS Type Secondary Condenser

2 RE-614 Glass Lined Reactor 3 KL MSGL 9.37 65494 15.21 Sparkler filter

3 RE-future Stainless Steel Reactor 6.5 KL SS316 15.68 109664 25.47 Reactor Vacuum pump

4 RE-future Stainless Steel Reactor 7 KL SS316 16.48 115218 26.76 Reactor Vacuum pump

5 RE-future Stainless Steel Reactor 7 KL SS316 16.48 115218 26.76

6 RE-future Stainless Steel Reactor 7 KL SS316 16.48 115218 26.76

7 RE-future Stainless Steel Reactor 7 KL SS316 16.48 115218 26.76

8 RE-future Stainless Steel Reactor 7 KL SS316 16.48 115218 26.76

9 RE-future Stainless Steel Reactor 7 KL SS316 16.48 115218 26.76

10 RE-future Stainless Steel Reactor 7 KL SS316 16.48 115218 26.76

SUB TOTAL 239.60

DIVERSITY 20%

Total Flow rate with Diversity @ intermediate (A) 47.92

11 RE-615 Stainless Steel Reactor 7 KL SS316 16.48 115218 26.76

12 RE-616 Stainless Steel Reactor 7 KL SS316 16.48 115218 26.76

13 RE-future Stainless Steel Reactor 7 KL SS316 16.48 115218 26.76

SUB TOTAL 80.28

DIVERSITY maximum one

Total Flow rate with Diversity (A) 26.76

Piperack @ below 6.0 m lvl

DRYERS (CONTINUOUS )

5 RD-605 Rotacone vacuum tray dryer 2 KL SS316 14080 3.27

6 RD-604 Rotacone vacuum tray dryer 2 KL SS316 14080 3.27

7 FBD-601 Fluidized bed dryer with blower 300 Kg SS316 NA 5280 1.23

8 FBD-602 Fluidized bed dryer with blower 300 Kg SS316 NA 5280 1.23

9 FD-601 ANFD with recevier and condenser 1.6 KL SS316 NA 7582 1.76

SUB TOTAL 6.54

DIVERSITY 100%

Flow rate with Diversity (B) 6.54

Total Flow rate (A+B) 33.30

Safety Margin (15%) 38.29


SF-4 ESTIMATION FOR WING-II (PREGABLIN)

S NO. TAG No. EQUIPMENT DESCRIPTION CAPACITY MOC HTA Heat load SF-4 Flow rate Remarks

Piperack @ 15.5 m lvl

1 RE-613 Stainless Steel Reactor 2 KL SS316 7.15 46407 10.92SS Type Secondary Condenser

2 RE-614 Glass Lined Reactor 3 KL MSGL 9.37 60811 14.30 Sparkler filter

3 RE-future Stainless Steel Reactor 6.5 KL SS316 15.68 101822 23.95 Reactor Vacuum pump

4 RE-future Stainless Steel Reactor 7 KL SS316 16.48 106979 25.17 Reactor Vacuum pump

5 RE-future Stainless Steel Reactor 7 KL SS316 16.48 106979 25.17

6 RE-future Stainless Steel Reactor 7 KL SS316 16.48 106979 25.17

7 RE-future Stainless Steel Reactor 7 KL SS316 16.48 106979 25.17

8 RE-future Stainless Steel Reactor 7 KL SS316 16.48 106979 25.17

9 RE-future Stainless Steel Reactor 7 KL SS316 16.48 106979 25.17

10 RE-future Stainless Steel Reactor 7 KL SS316 16.48 106979 25.17

SUB TOTAL 225.33

DIVERSITY 15%

Total Flow rate with Diversity @ intermediate (A) 33.80

Clean room reactors

11 RE-615 Stainless Steel Reactor 7 KL SS316 16.48 106979 25.17

12 RE-616 Stainless Steel Reactor 7 KL SS316 16.48 106979 25.17

13 RE-future Stainless Steel Reactor 7 KL SS316 16.48 106979 25.17

SUB TOTAL 75.50

DIVERSITY maximum one

Total Flow rate with Diversity (A) 25.17

Piperack @ below 6.0 m lvl

DRYERS (CONTINUOUS )

5 RD-605 Rotacone vacuum tray dryer 2 KL SS316 14080 3.31

6 RD-604 Rotacone vacuum tray dryer 2 KL SS316 14080 3.31

SUB TOTAL 6.62

DIVERSITY 100%

Total Flow rate with Diversity (A) 6.62

Total Flow rate (A+B) 31.79

Safety Margin (15%) 34.97


Instrument air Consumption REMARKS
S NO. TAG No. EQUIPMENT DESCRIPTION CAPACITY MOC
Instrument air requirement
No of control valve No of on/off valves
(SCFM)

REACTORS FOR INTERMEDIATE AREA

1 RE-601 Glass Lined Reactor 6.3 MSGL 3.0 22.0 45.8

2 RE-602 Glass Lined Reactor 6.3 MSGL 3.0 22.0 45.8

3 RE-603 Stainless Steel Reactor 3.5 SS316 3.0 22.0 45.8 Glass Type Primary Condenser

4 RE-604 Stainless Steel Reactor 3.5 SS316 3.0 22.0 45.8 Graphite Type Primary Condenser

5 RE-605 Glass Lined Reactor 3 MSGL 3.0 22.0 45.8

6 RE-606 Stainless Steel Reactor 4.5 SS316 3.0 22.0 45.8 Glass Type Secondary Condenser

7 RE-607 Stainless Steel Reactor 4.5 SS316 3.0 22.0 45.8 Graphite Type Secondary Condenser

8 RE-608 Stainless Steel Reactor 4 SS316 3.0 22.0 45.8 SS Type Secondary Condenser

9 RE-609 Stainless Steel Reactor 6 SS316 3.0 22.0 45.8

10 RE-610 Stainless Steel Reactor 4 SS316 3.0 22.0 45.8

11 RE-611 Glass Lined Reactor 4 MSGL 3.0 22.0 45.8

FILTERS FOR INTERMEDIATE AREA

12 CF-601 Centrifuge 48'' SS316 - TEFZEL COATED 1.0 7 14.6

13 CF-602 Centrifuge 48'' SS316 - TEFZEL COATED 1.0 7 14.6

14 CF-603 Centrifuge 48'' SS316 - TEFZEL COATED 1.0 7 14.6

15 CF-604 Centrifuge 48'' SS316 - TEFZEL COATED 1.0 7 14.6

16 CF-605 Centrifuge 48'' SS316 1.0 7 14.6

17 CF-606 Centrifuge 48'' SS316 1.0 7 14.6

18 CF-607 Centrifuge 48'' SS316 1.0 7 14.6

19 CF-615 Centrifuge 48'' SS316 1.0 7 14.6

20 CF-608 Centrifuge 48'' SS316 - TEFZEL COATED 1.0 7 14.6

21 CF-609 Centrifuge 48'' SS316 - TEFZEL COATED 1.0 7 14.6

DRYERS

22 VTD-601 Vacuum Tray Dryer 96 Trays SS316 2 17 35.2

23 VTD-602 Vacuum Tray Dryer 96 Trays SS316 2 17 35.2

24 RD-601 Rotacone vacuum tray dryer 1.5 MSGL 2 17 35.2

25 FBD-601 Fluidized bed dryer with blower 300 Kg SS316 2 17 35.2

26 FBD-602 Fluidized bed dryer with blower 300 Kg SS316 2 17 35.2

27 RD-602 Rotacone vacuum tray dryer 2 SS316 2 17 35.2

28 FD-601 ANFD with recevier and condenser 1.6 SS316 2 17 35.2

29 RD-603 Rotacone vacuum tray dryer 1.5 SS316 2 17 35.2

DAY TANKS

30 DT-601 Day tanks (J)(With agitator) 0.5 SS316 1 6 12.6

31 DT-602 Day tanks (J)(With agitator) 1.5 SS316 1 6 12.6

32 DT-603 Day tanks (J)(With agitator) 1 MSGL 1 6 12.6

33 DT-604 Day tanks (J)(With agitator) 0.5 SS316 1 6 12.6

34 DT-606 Day tanks (J)(With agitator) 0.5 SS316 1 6 12.6

35 DT-607 Day tanks (With agitator) 0.25 SS316 1 6 12.6

36 DT-608 Day tank Without jacket & agitator 0.25 MSGL 1 6 12.6

37 DT-609 Day tanks (J)(With agitator) 0.5 SS316 1 6 12.6

38 DST-601 DAY STORAGE TANK 3 SS316 1 6 12.6

39 DST-602 DAY STORAGE TANK 2 SS316 1 6 12.6

40 DST-603 DAY STORAGE TANK 3 SS316 1 6 12.6

41 DST-604 DAY STORAGE TANK 5 SS316 1 6 12.6

42 DST-605 DAY STORAGE TANK 3 SS316 1 6 12.6

43 DST-606 DAY STORAGE TANK 2 SS316 1 6 12.6

44 DST-607 DAY STORAGE TANK 2 SS316 1 6 12.6

45 DST-608 DAY STORAGE TANK 3 SS316 1 6 12.6

Total nitrogen consumption 1133

Diversity 5%

Total nitrogen consumption with diversity


57

Excess @ 10% margin


62
GAPI INTERNAL PIPERACK SECTIONS
Piperack below 18.5 M.Lvl (@ 15.0 m Lvl)
Section A-A @ piperack below 18.5 M.Lvl (@ 15.0 m Lvl) i.e Wing-II Section B-B @ piperack below 18.5 M.Lvl (@ 15.0 m Lvl) i.e Wing-II Section C-C @ piperack below 18.5 M.Lvl (@ 15.0 m Lvl) i.e Wing-I Section D-D @ piperack below 18.5 M.Lvl (@ 15.0 m Lvl) i.e Wing-I Section E-E @ Main piperack below 18.5 M.Lvl (@ 15.0 m Lvl) i.e corridor Section F-F @ Main piperack below 18.5 M.Lvl (@ 15.0 m Lvl) i.e corridor
S.no Pipe description Pipe line size MOC Insulation Remarks S.no Pipe description Pipe line size MOC Insulation Remarks S.no Pipe description Pipe line size MOC Insulation Remarks S.no Pipe description Pipe line size MOC Insulation Remarks S.no Pipe description Pipe line size MOC Insulation Remarks S.no Pipe description Pipe line size MOC Insulation Remarks
1 SF-2 Supply 150 MS1 1 SF-2 Supply 100 MS1 1 SF-2 Supply 100 MS1 NA 1 SF-2 Supply 150 MS1 1 SF-2 Supply 250 MS1 1 SF-2 Supply 250 MS1
2 SF-2 Return 150 MS1 2 SF-2 Return 100 MS1 2 SF-2 Return 100 MS1 NA 2 SF-2 Return 150 MS1 2 SF-2 Return 250 MS1 2 SF-2 Return 250 MS1
3 SF-3 Supply 100 MS1 cold 3 SF-3 Supply 80 MS1 cold 3 SF-3 Supply 80 MS1 cold 3 SF-3 Supply 100 MS1 cold 3 SF-3 Supply 200 MS1 cold 3 SF-3 Supply 200 MS1 cold
4 SF-3 Return 100 MS1 cold 4 SF-3 Return 80 MS1 cold 4 SF-3 Return 80 MS1 cold 4 SF-3 Return 100 MS1 cold 4 SF-3 Return 200 MS1 cold 4 SF-3 Return 200 MS1 cold
SS304/ NA SS304/ NA SS304/ NA SS304/ NA SS304/ NA SS304/ NA
5 Nitrogen 40 SS316 5 Nitrogen 40 SS316 5 Nitrogen 40 SS316 5 Nitrogen 40 SS316 5 Nitrogen 50 SS316 5 Nitrogen 50 SS316
SS304/ NA SS304/ NA SS304/ NA SS304/ NA SS304/ NA SS304/ NA
6 Instrument air 40 SS316 6 Instrument air 40 SS316 6 Instrument air 40 SS316 6 Instrument air 40 SS316 6 Instrument air 50 SS316 6 Instrument air 50 SS316
SS304/ NA SS304/ NA SS304/ NA SS304/ NA SS304/ NA SS304/ NA
7 Breathing air 25 SS316 7 Breathing air 25 SS316 7 Breathing air 25 SS316 7 Breathing air 25 SS316 7 Breathing air 40 SS316 7 Breathing air 40 SS316
8 Solvent-01 (Fresh) 40 SS316 NA 8 Solvent-01 (Fresh) 40 SS316 NA 8 Solvent-01 (Fresh) 40 SS316 NA 8 Solvent-01 (Fresh) 40 SS316 NA 8 Solvent-01 (Fresh) 50 SS316 NA 8 Solvent-01 (Fresh) 50 SS316 NA
9 Solvent-02 (Fresh) 40 SS316 NA 9 Solvent-02 (Fresh) 40 SS316 NA 9 Solvent-02 (Fresh) 40 SS316 NA 9 Solvent-02 (Fresh) 40 SS316 NA 9 Solvent-02 (Fresh) 50 SS316 NA 9 Solvent-02 (Fresh) 50 SS316 NA
10 Solvent-03 (Fresh) 40 MSPTFE NA 10 Spent-01 40 SS316 NA 10 Spent-01 40 SS316 NA 10 Solvent-03 (Fresh) 40 MSPTFE NA 10 Solvent-03 (Fresh) 50 MSPTFE NA 10 Solvent-03 (Fresh) 50 MSPTFE NA
11 Solvent-04 (Recovered) 40 SS316 NA 11 Spent-03 40 MSPTFE NA 11 Spent-03 40 MSPTFE NA 11 Solvent-04 (Recovered) 40 SS316 NA 11 Solvent-04 (Recovered) 50 SS316 NA 11 Solvent-04 (Recovered) 50 SS316 NA
NA PPFRP/ NA PPFRP/ NA NA NA NA
12 Solvent-05 (Recovered) 40 MSPTFE 12 Alkaline Scrubber 100 MSHDPE 12 Alkaline Scrubber 100 MSHDPE 12 Solvent-05 (Recovered) 40 MSPTFE 12 Solvent-05 (Recovered) 50 MSPTFE 12 Solvent-05 (Recovered) 50 MSPTFE
PPFRP/ PPFRP/
NA MSHDPE NA MSHDPE NA NA NA NA
13 Spent-01 40 SS316 13 Acidic scrubber 100 13 Acidic scrubber 100 13 Spent-01 40 SS316 13 Spent-01 40 SS316 13 Spent-01 40 SS316
14 Spent-02 40 SS316 NA 14 Knock Out Line 100 MS1 NA 14 Knock Out Line 100 MS1 NA 14 Spent-02 40 SS316 NA 14 Spent-02 40 SS316 NA 14 Spent-02 40 SS316 NA
NA SS304/ NA SS304/ NA NA NA NA
15 Spent-03 40 MSPTFE 15 Potable Water line 50 SS316 15 Potable Water line 50 SS316 15 Spent-03 40 MSPTFE 15 Spent-03 40 MSPTFE 15 Spent-03 40 MSPTFE
SS304/ SS304/ PPFRP/ PPFRP/ PPFRP/
PPFRP/MSHDPE NA NA NA MSHDPE NA MSHDPE NA MSHDPE NA
16 Alkaline Scrubber 150 16 Vaccum-line(VP-608) 80 SS316 16 Vaccum-line(VP-607) 80 SS316 16 Alkaline Scrubber 150 16 Alkaline Scrubber(Wing-II) 200 16 Alkaline Scrubber(Wing-I) 200
PPFRP/MSHDPE NA SS304/ NA PPFRP/ NA PPFRP/ NA PPFRP/ NA
17 Acidic scrubber 150 17 Vaccum-line(VP-606) 80 SS316 17 Acidic scrubber 150 MSHDPE 17 Acidic scrubber(Wing-II) 200 MSHDPE 17 Acidic scrubber(Wing-I) 200 MSHDPE
PPFRP/
NA NA NA NA
18 Knock Out Line 100 MS1 18 Knock Out Line 100 MS1 18 Alkaline Scrubber(Wing-I) 200 MSHDPE 18 Knock Out Line 100 MS1
SS304/ SS304/ PPFRP/ SS304/
NA NA NA NA
19 Potable Water line 50 SS316 19 Potable Water line 50 SS316 19 Acidic scrubber(Wing-I) 200 MSHDPE 19 Potable Water line 80 SS316
SS304/ NA SS304/ NA NA SS304/ NA
20 Vaccum-line(VP-609) 80 SS316 20 Vaccum-line(VP-601) 80 SS316 20 Knock Out Line 100 MS1 20 Vaccum-line(VP-601) 80 SS316
SS304/ NA SS304/ NA SS304/ NA SS304/ NA
21 Vaccum-line(VP-610) 80 SS316 21 Vaccum-line(VP-602) 80 SS316 21 Potable Water line 80 SS316 21 Vaccum-line(VP-602) 80 SS316
NA SS304/ NA NA
22 Vaccum-line(VP-603) 80 MSPTFE 22 Vaccum-line(VP-601) 80 SS316 22 Vaccum-line(VP-603) 80 MSPTFE
NA SS304/ NA NA
23 Vaccum-line(VP-604) 80 MSPTFE 23 Vaccum-line(VP-602) 80 SS316 23 Vaccum-line(VP-604) 80 MSPTFE
24 Vaccum-line(VP-605) 80 MSPTFE NA 24 Vaccum-line(VP-603) 80 MSPTFE NA 24 Vaccum-line(VP-605) 80 MSPTFE NA

NA SS304/ NA
25 Vaccum-line(VP-604) 80 MSPTFE 25 Vaccum-line(VP-607) 80 SS316
Piperack below 15.0 M.Lvl (@ 11.5 m Lvl)
Section G-G @ piperack below 15.0 M.Lvl (@ 11.5 m Lvl) i.e Wing-II Section H-H @ piperack below 15.0 M.Lvl (@ 11.5 m Lvl) i.e Wing-II Section I-I @piperack below 15.0 M.Lvl (@ 11.5 m Lvl) i.e Wing-I Section J-J @ piperack below 15.0 M.Lvl (@ 11.5 m Lvl) i.e Wing-I Section K-K@ Main piperack below 15.0 M.Lvl (@ 11.5 m Lvl) i.e corridor Section L-L@ Main piperack below 15.0 M.Lvl (@ 11.5 m Lvl) i.e corridor
S.no Pipe description Pipe line size MOC Insulation Remarks S.no Pipe description Pipe line size MOC Insulation Remarks S.no Pipe description Pipe line size MOC Insulation Remarks S.no Pipe description Pipe line size MOC Insulation Remarks S.no Pipe description Pipe line size MOC Insulation Remarks S.no Pipe description Pipe line size MOC Insulation Remarks
1 SF-1 Supply 150 MS1 Hot 1 SF-1 Supply 100 MS1 Hot 1 SF-1 Supply 100 MS1 Hot 1 SF-1 Supply 150 MS1 Hot 1 SF-1 Supply 250 MS1 Hot 1 SF-1 Supply 250 MS1 Hot
2 SF-1 Return 150 MS1 Hot 2 SF-1 Return 100 MS1 Hot 2 SF-1 Return 100 MS1 Hot 2 SF-1 Return 150 MS1 Hot 2 SF-1 Return 250 MS1 Hot 2 SF-1 Return 250 MS1 Hot
3 SF-2 Supply 150 MS1 3 SF-2 Supply 100 MS1 3 SF-2 Supply 100 MS1 NA 3 SF-2 Supply 150 MS1 3 SF-2 Supply 250 MS1 3 SF-2 Supply 250 MS1
4 SF-2 Return 150 MS1 4 SF-2 Return 100 MS1 4 SF-2 Return 100 MS1 NA 4 SF-2 Return 150 MS1 4 SF-2 Return 250 MS1 4 SF-2 Return 250 MS1
5 SF-3 Supply 100 MS1 cold 5 SF-3 Supply 80 MS1 cold 5 SF-3 Supply 80 MS1 cold 5 SF-3 Supply 100 MS1 cold 5 SF-3 Supply 200 MS1 cold 5 SF-3 Supply 200 MS1 cold
6 SF-3 Return 100 MS1 cold 6 SF-3 Return 80 MS1 cold 6 SF-3 Return 80 MS1 cold 6 SF-3 Return 100 MS1 cold 6 SF-3 Return 200 MS1 cold 6 SF-3 Return 200 MS1 cold
7 SF-4 Supply 80 MS1 cold 7 SF-4 Supply 50 MS1 cold 7 SF-4 Supply 50 MS1 cold 7 SF-4 Supply 80 MS1 cold 7 SF-4 Supply 100 MS1 cold 7 SF-4 Supply 100 MS1 cold
8 SF-4 Return 80 MS1 cold 8 SF-4 Return 50 MS1 cold 8 SF-4 Return 50 MS1 cold 8 SF-4 Return 80 MS1 cold 8 SF-4 Return 100 MS1 cold 8 SF-4 Return 100 MS1 cold

Piperack below 11.0 M.Lvl (@ 6.0 m Lvl)


Section S-S @ piperack below 11.5 M.Lvl (@ 6.0m Lvl) i.e Wing-II Section T-T @ piperack below 11.5 M.Lvl (@ 6.0m Lvl) i.e Wing-II Section U-U @ piperack below 11.5 M.Lvl (@ 6.0m Lvl) i.e Wing-I Section V-V @ piperack below 11.5 M.Lvl (@ 6.0m Lvl) i.e Wing-I Section W-W@ Main piperack below 11.5 M.Lvl (@ 6.0m Lvl) i.e corridor Section X-X @ Main piperack below 11.5 M.Lvl (@ 6.0m Lvl) i.e corridor
S.no Pipe description Pipe line size MOC Insulation Remarks S.no Pipe description Pipe line size MOC Insulation Remarks S.no Pipe description Pipe line size MOC Insulation Remarks S.no Pipe description Pipe line size MOC Insulation Remarks S.no Pipe description Pipe line size MOC Insulation Remarks S.no Pipe description Pipe line size MOC Insulation Remarks
1 SF-1 Supply 50 MS1 Hot 1 SF-1 Supply 50 MS1 Hot 1 SF-1 Supply 50 MS1 Hot 1 SF-1 Supply 50 MS1 Hot 1 SF-1 Supply 80 MS1 Hot 1 SF-1 Supply 50 MS1 Hot
2 SF-1 Return 50 MS1 Hot 2 SF-1 Return 50 MS1 Hot 2 SF-1 Return 50 MS1 Hot 2 SF-1 Return 50 MS1 Hot 2 SF-1 Return 80 MS1 Hot 2 SF-1 Return 50 MS1 Hot
1 SF-2 Supply 50 MS1 1 SF-2 Supply 50 MS1 1 SF-2 Supply 50 MS1 NA 1 SF-2 Supply 50 MS1 1 SF-2 Supply 80 MS1 1 SF-2 Supply 50 MS1
2 SF-2 Return 50 MS1 2 SF-2 Return 50 MS1 2 SF-2 Return 50 MS1 NA 2 SF-2 Return 50 MS1 2 SF-2 Return 80 MS1 2 SF-2 Return 50 MS1
3 SF-3 Supply 25 MS1 cold 3 SF-3 Supply 25 MS1 cold 3 SF-3 Supply 25 MS1 cold 3 SF-3 Supply 25 MS1 cold 3 SF-3 Supply 40 MS1 cold 3 SF-3 Supply 25 MS1 cold
4 SF-3 Return 25 MS1 cold 4 SF-3 Return 25 MS1 cold 4 SF-3 Return 25 MS1 cold 4 SF-3 Return 25 MS1 cold 4 SF-3 Return 40 MS1 cold 4 SF-3 Return 25 MS1 cold
SS304/ NA SS304/ NA SS304/ NA SS304/ NA SS304/ NA SS304/ NA
5 Nitrogen 40 SS316 5 Nitrogen 40 SS316 5 Nitrogen 40 SS316 5 Nitrogen 40 SS316 5 Nitrogen 50 SS316 5 Nitrogen 50 SS316
SS304/ NA SS304/ NA SS304/ NA SS304/ NA SS304/ NA SS304/ NA
6 Instrument air 40 SS316 6 Instrument air 40 SS316 6 Instrument air 40 SS316 6 Instrument air 40 SS316 6 Instrument air 50 SS316 6 Instrument air 50 SS316
SS304/ NA SS304/ NA SS304/ NA SS304/ NA SS304/ NA SS304/ NA
7 Breathing air 25 SS316 7 Breathing air 25 SS316 7 Breathing air 25 SS316 7 Breathing air 25 SS316 7 Breathing air 40 SS316 7 Breathing air 40 SS316
9 Solvent-02 (Fresh) 40 SS316 NA 9 Solvent-02 (Fresh) 40 SS316 NA 9 Solvent-02 (Fresh) 40 SS316 NA 9 Solvent-02 (Fresh) 40 SS316 NA 9 Solvent-02 (Fresh) 50 SS316 NA 9 Solvent-02 (Fresh) 50 SS316 NA
12 Solvent-05 (Recovered) 40 MSPTFE NA 10 Spent-01 40 SS316 NA 10 Spent-01 40 SS316 NA 10 Solvent-03 (Fresh) 40 MSPTFE NA 10 Solvent-03 (Fresh) 50 MSPTFE NA 10 Solvent-03 (Fresh) 50 MSPTFE NA
13 Spent-01 40 SS316 NA 11 Spent-03 40 MSPTFE NA 11 Spent-03 40 MSPTFE NA 11 Solvent-04 (Recovered) 40 SS316 NA 11 Solvent-04 (Recovered) 50 SS316 NA 11 Solvent-04 (Recovered) 50 SS316 NA
NA PPFRP/ NA PPFRP/ NA NA NA NA
14 Spent-02 40 SS316 12 Alkaline Scrubber 100 MSHDPE 12 Alkaline Scrubber 100 MSHDPE 12 Solvent-05 (Recovered) 40 MSPTFE 12 Solvent-05 (Recovered) 50 MSPTFE 12 Solvent-05 (Recovered) 50 MSPTFE
PPFRP/ PPFRP/
NA MSHDPE NA MSHDPE NA NA NA NA
15 Spent-03 40 MSPTFE 13 Acidic scrubber 100 13 Acidic scrubber 100 13 Spent-01 40 SS316 13 Spent-01 40 SS316 13 Spent-01 40 SS316
16 Alkaline Scrubber 150 PPFRP/MSHDPE NA 14 Knock Out Line 100 MS1 NA 14 Knock Out Line 100 MS1 NA 14 Spent-02 40 SS316 NA 14 Spent-02 40 SS316 NA 14 Spent-02 40 SS316 NA
PPFRP/MSHDPE NA SS304/ NA SS304/ NA NA NA NA
17 Acidic scrubber 150 15 Potable Water line 50 SS316 15 Potable Water line 50 SS316 15 Spent-03 40 MSPTFE 15 Spent-03 40 MSPTFE 15 Spent-03 40 MSPTFE
SS304/ SS304/ SS304/ PPFRP/ PPFRP/ PPFRP/
NA NA NA NA NA NA
19 Potable Water line 50 SS316 16 Vaccum-line(VP-608) 80 SS316 16 Vaccum-line(VP-607) 80 SS316 16 Alkaline Scrubber 150 MSHDPE 16 Alkaline Scrubber(Wing-II) 200 MSHDPE 16 Alkaline Scrubber(Wing-I) 200 MSHDPE
SS304/ NA PPFRP/ NA PPFRP/ NA PPFRP/ NA
Vaccum-line(VP-610) 80 SS316 17 Acidic scrubber 150 MSHDPE 17 Acidic scrubber(Wing-II) 200 MSHDPE 17 Acidic scrubber(Wing-I) 200 MSHDPE

NA PPFRP/ NA NA
18 Knock Out Line 100 MS1 18 Alkaline Scrubber(Wing-I) 200 MSHDPE 18 Knock Out Line 100 MS1
SS304/ PPFRP/ SS304/
NA MSHDPE NA NA
19 Potable Water line 50 SS316 19 Acidic scrubber(Wing-I) 200 19 Potable Water line 80 SS316
SS304/ NA NA SS304/ NA
20 Vaccum-line(VP-601) 80 SS316 20 Knock Out Line 100 MS1 20 Vaccum-line(VP-601) 80 SS316
SS304/ NA SS304/ NA
21 Potable Water line 80 SS316 25 Vaccum-line(VP-607) 80 SS316
SS304/ NA
22 Vaccum-line(VP-610) 80 SS316
SS304/ NA
23 Vaccum-line(VP-608) 80 SS316
24 Vaccum-line(VP-607) 80 MSPTFE NA
25 Vaccum-line(VP-601) 80 MSPTFE NA

Piperack below 6.0 M.Lvl (@ 0.0 m Lvl)


Section M-M @ piperack below 6.0 M.Lvl (@ 0.0m Lvl) i.e Wing-II Section N-N @ piperack below 6.0 M.Lvl (@ 0.0m Lvl) i.e Wing-II Section O-O @ piperack below 6.0 M.Lvl (@ 0.0m Lvl) i.e Wing-I Section P-P @ piperack below 6.0 M.Lvl (@ 0.0m Lvl) i.e Wing-I Section Q-Q @ Main @ piperack below 6.0 M.Lvl (@ 0.0m Lvl) i.e corridor Section R-R @ Main piperack below 6.0 M.Lvl (@ 0.0m Lvl) i.e corridor
S.no Pipe description Pipe line size MOC Insulation Remarks S.no Pipe description Pipe line size MOC Insulation Remarks S.no Pipe description Pipe line size MOC Insulation Remarks S.no Pipe description Pipe line size MOC Insulation Remarks S.no Pipe description Pipe line size MOC Insulation Remarks S.no Pipe description Pipe line size MOC Insulation Remarks
1 SF-1 Supply 80 MS1 Hot 1 SF-1 Supply 80 MS1 Hot 1 SF-1 Supply 80 MS1 Hot 1 SF-1 Supply 80 MS1 Hot 1 SF-1 Supply 100 MS1 Hot 1 SF-1 Supply 80 MS1 Hot
2 SF-1 Return 80 MS1 Hot 2 SF-1 Return 80 MS1 Hot 2 SF-1 Return 80 MS1 Hot 2 SF-1 Return 80 MS1 Hot 2 SF-1 Return 100 MS1 Hot 2 SF-1 Return 80 MS1 Hot
1 SF-2 Supply 80 MS1 1 SF-2 Supply 80 MS1 1 SF-2 Supply 80 MS1 1 SF-2 Supply 80 MS1 NA 1 SF-2 Supply 100 MS1 1 SF-2 Supply 80 MS1
2 SF-2 Return 80 MS1 2 SF-2 Return 80 MS1 2 SF-2 Return 80 MS1 2 SF-2 Return 80 MS1 NA 2 SF-2 Return 100 MS1 2 SF-2 Return 80 MS1
3 SF-3 Supply 40 MS1 cold 3 SF-3 Supply 40 MS1 cold 3 SF-3 Supply 40 MS1 cold 3 SF-3 Supply 40 MS1 cold 3 SF-3 Supply 80 MS1 cold 3 SF-3 Supply 40 MS1 cold
4 SF-3 Return 40 MS1 cold 4 SF-3 Return 40 MS1 cold 4 SF-3 Return 40 MS1 cold 4 SF-3 Return 40 MS1 cold 4 SF-3 Return 80 MS1 cold 4 SF-3 Return 40 MS1 cold
SS304/ NA SS304/ NA SS304/ NA SS304/ NA SS304/ NA SS304/ NA
5 Nitrogen 40 SS316 5 Nitrogen 40 SS316 5 Nitrogen 40 SS316 5 Nitrogen 40 SS316 5 Nitrogen 50 SS316 5 Nitrogen 40 SS316
SS304/ NA SS304/ NA SS304/ NA SS304/ NA SS304/ NA SS304/ NA
6 Instrument air 40 SS316 6 Instrument air 40 SS316 6 Instrument air 40 SS316 6 Instrument air 40 SS316 6 Instrument air 50 SS316 6 Instrument air 40 SS316
SS304/ NA SS304/ NA SS304/ NA SS304/ NA SS304/ NA SS304/ NA
7 Breathing air 25 SS316 7 Breathing air 25 SS316 7 Breathing air 25 SS316 7 Breathing air 25 SS316 7 Breathing air 40 SS316 7 Breathing air 25 SS316
9 Solvent-02 (Fresh) 40 SS316 NA 9 Solvent-02 (Fresh) 40 SS316 NA 9 Solvent-02 (Fresh) 40 SS316 NA 9 Solvent-02 (Fresh) 40 SS316 NA 9 Solvent-02 (Fresh) 50 SS316 NA 9 Solvent-02 (Fresh) 40 SS316 NA
12 Spent-02 40 SS316 NA 12 Spent-02 40 SS316 NA 12 Spent-02 40 SS316 NA 10 Spent-01 40 SS316 NA 10 Solvent-03 (Fresh) 50 MSPTFE NA 10 Solvent-03 (Fresh) 40 MSPTFE NA
13 Spent-03 40 MSPTFE NA 13 Spent-03 40 MSPTFE NA 13 Spent-03 40 MSPTFE NA 11 Spent-03 40 MSPTFE NA 11 Solvent-04 (Recovered) 50 SS316 NA 11 Solvent-04 (Recovered) 40 SS316 NA
PPFRP/MSHDPE NA PPFRP/ NA PPFRP/ NA PPFRP/ NA NA NA
14 Alkaline Scrubber 100 14 Alkaline Scrubber 100 MSHDPE 14 Alkaline Scrubber 100 MSHDPE 12 Alkaline Scrubber 100 MSHDPE 12 Solvent-05 (Recovered) 50 MSPTFE 12 Solvent-05 (Recovered) 40 MSPTFE
PPFRP/ PPFRP/ PPFRP/
PPFRP/MSHDPE NA MSHDPE NA MSHDPE NA MSHDPE NA NA NA
15 Acidic scrubber 100 15 Acidic scrubber 100 15 Acidic scrubber 100 13 Acidic scrubber 100 13 Spent-01 40 SS316 13 Spent-01 40 SS316
SS304/ NA SS304/ NA SS304/ NA NA NA NA
16 Potable Water line 50 SS316 16 Potable Water line 50 SS316 16 Potable Water line 50 SS316 14 Knock Out Line 100 MS1 14 Spent-02 40 SS316 14 Spent-02 40 SS316
SS304/ NA SS304/ NA SS304/ NA SS304/ NA NA NA
17 Vaccum-line(VP-610) 80 SS316 17 Vaccum-line(VP-610) 80 SS316 17 Vaccum-line(VP-610) 80 SS316 15 Potable Water line 50 SS316 15 Spent-03 40 MSPTFE 15 Spent-03 40 MSPTFE
SS304/ NA PPFRP/ NA PPFRP/ NA
16 Vaccum-line(VP-607) 80 SS316 16 Alkaline Scrubber(Wing-II) 150 MSHDPE 16 Alkaline Scrubber(Wing-I) 100 MSHDPE
PPFRP/ NA PPFRP/ NA
17 Acidic scrubber(Wing-II) 150 MSHDPE 17 Acidic scrubber(Wing-I) 100 MSHDPE
PPFRP/
MSHDPE NA NA
18 Alkaline Scrubber(Wing-I) 100 18 Knock Out Line 100 MS1
PPFRP/ NA SS304/ NA
19 Acidic scrubber(Wing-I) 100 MSHDPE 19 Potable Water line 80 SS316
NA SS304/ NA
20 Knock Out Line 100 MS1 20 Vaccum-line(VP-601) 80 SS316
SS304/ NA SS304/ NA
21 Potable Water line 80 SS316 25 Vaccum-line(VP-607) 80 SS316
SS304/ NA
22 Vaccum-line(VP-610) 80 SS316
SS304/ NA
23 Vaccum-line(VP-608) 80 SS316
24 Vaccum-line(VP-607) 80 MSPTFE NA
25 Vaccum-line(VP-601) 80 MSPTFE NA
GAPI INTERNAL PIPERACK SECTIONS

Piperack below 18.5 M.Lvl (@ 15.0 m Lvl)


Section 13-13 @ piperack below 18.5 M.Lvl i.e Wing-II Section 12-12 @ piperack below 18.5 M.Lvl (@ 15.0 m Lvl) i.e Wing-II Section 11-11 @ piperack below 18.5 M.Lvl (@ 15.0 m Lvl) i.e Wing-I Section 10-10 @ piperack below 18.5 M.Lvl (@ 15.0 m Lvl) i.e Wing-I

@20-11-2021 @15-11-2021 @20-11-2021 @15-11-2021 @20-11-2021 @15-11-2021 @20-11-2021 @15-11-2021

S.no Pipe description MOC Insulation Pipe line size Pipe line size Remarks S.no Pipe description MOC Insulation Pipe line size Pipe line size Remarks S.no Pipe description MOC Insulation Pipe line size Pipe line size Remarks S.no Pipe description MOC Insulation Pipe line size Pipe line size Remarks

1 SF-1 Supply MS1 Hot 150 -- 1 SF-1 Supply MS1 Hot 100 -- 1 SF-1 Supply MS1 Hot 100 -- 1 SF-1 Supply MS1 Hot 150 --

2 SF-1 Return MS1 Hot 150 -- 2 SF-1 Return MS1 Hot 100 -- 2 SF-1 Return MS1 Hot 100 -- 2 SF-1 Return MS1 Hot 150 --

1 SF-2 Supply MS1 150 -- 1 SF-2 Supply MS1 100 -- 1 SF-2 Supply MS1 NA 100 -- 1 SF-2 Supply MS1 150 --

2 SF-2 Return MS1 150 -- 2 SF-2 Return MS1 100 -- 2 SF-2 Return MS1 NA 100 -- 2 SF-2 Return MS1 150 --

3 SF-3 Supply MS1 cold 100 -- 3 SF-3 Supply MS1 cold 80 -- 3 SF-3 Supply MS1 cold 80 -- 3 SF-3 Supply MS1 cold 100 --

4 SF-3 Return MS1 cold 100 -- 4 SF-3 Return MS1 cold 80 -- 4 SF-3 Return MS1 cold 80 -- 4 SF-3 Return MS1 cold 100 --

7 SF-4 Supply MS1 cold 80 -- 7 SF-4 Supply MS1 cold 50 -- 7 SF-4 Supply MS1 cold 50 -- 7 SF-4 Supply MS1 cold 80 --

8 SF-4 Return MS1 cold 80 -- 8 SF-4 Return MS1 cold 50 -- 8 SF-4 Return MS1 cold 50 -- 8 SF-4 Return MS1 cold 80 --
SS304/ SS304/ SS304/ SS304/
5 Nitrogen SS316 NA 40 40 5 Nitrogen SS316 NA 40 40 5 Nitrogen SS316 NA 40 40 5 Nitrogen SS316 NA 40 40
SS304/ SS304/ SS304/ SS304/
6 Instrument air SS316 NA 40 25 6 Instrument air SS316 NA 40 25 6 Instrument air SS316 NA 25 25 6 Instrument air SS316 NA 40 25
SS304/ SS304/ SS304/ SS304/
7 Breathing air SS316 NA 25 25 7 Breathing air SS316 NA 25 25 7 Breathing air SS316 NA 40 25 7 Breathing air SS316 NA 25 25

8 Solvent-01 (Fresh) SS316 NA 40 -- 8 Solvent-01 (Fresh) SS316 NA 40 40 8 Solvent-01 (Fresh) SS316 NA 40 40 8 Solvent-01 (Fresh) SS316 NA 40 --

9 Solvent-02 (Fresh) SS316 NA 40 -- 9 Solvent-02 (Fresh) SS316 NA 40 40 9 Solvent-02 (Fresh) SS316 NA 40 40 9 Solvent-02 (Fresh) SS316 NA 40 --

10 Solvent-03 (Fresh) MSPTFE NA 40 -- 10 Spent-01 SS316 NA 40 40 10 Spent-01 SS316 NA 40 40 10 Solvent-03 (Fresh) MSPTFE NA 40 --

11 Solvent-04 (Recovered) SS316 NA 40 -- 11 Spent-03 MSPTFE NA 40 40 11 Spent-03 MSPTFE NA 40 40 11 Solvent-04 (Recovered) SS316 NA 40 --
NA PPFRP/ NA PPFRP/ NA NA
12 Solvent-05 (Recovered) MSPTFE 40 -- 12 Alkaline Scrubber MSHDPE 100 -- 12 Alkaline Scrubber MSHDPE 100 -- 12 Solvent-05 (Recovered) MSPTFE 40 --
PPFRP/ PPFRP/
13 Spent-01 SS316 NA 40 -- 13 Acidic scrubber NA 100 -- 13 Acidic scrubber NA 100 -- 13 Spent-01 SS316 NA 40 --
MSHDPE MSHDPE

14 Spent-02 SS316 NA 40 -- 14 Knock Out Line MS1 NA 80 80 14 Knock Out Line MS1 NA 50 80 14 Spent-02 SS316 NA 40 --
SS304/ SS304/
15 Spent-03 MSPTFE NA 40 -- 15 Potable Water line SS316 NA 40 40 15 Potable Water line SS316 NA 40 40 15 Spent-03 MSPTFE NA 40 --
SS304/ SS304/
16 Alkaline Scrubber PPFRP/MSHDPE NA 150 100 16 Vaccum-line(VP-608) SS316 NA 80 80 16 Vaccum-line(VP-607) SS316 NA 80 80 16 Alkaline Scrubber PPFRP/MSHDPE NA 150 100

17 Acidic scrubber PPFRP/MSHDPE NA 150 100 17 Acidic scrubber PPFRP/MSHDPE NA 150 100

18 Knock Out Line MS1 NA 100 80 18 Knock Out Line MS1 NA 100 80
SS304/ SS304/
19 Potable Water line SS316 NA 50 40 19 Potable Water line SS316 NA 50 40
SS304/ SS304/
20 Vaccum-line(VP-609) SS316 NA 80 80 20 Vaccum-line(VP-601) SS316 NA 80 80
SS304/ SS304/
21 Vaccum-line(VP-610) SS316 NA 80 80 21 Vaccum-line(VP-602) SS316 NA 80 80

22 Vaccum-line(VP-603) MSPTFE NA 80 80

23 Vaccum-line(VP-604) MSPTFE NA 80 80
Piperack below 11.0 M.Lvl (@ 6.0 m Lvl)
Section 9-9 @ piperack below 11.5 M.Lvl (@ 6.0m Lvl) i.e Wing-II Section 8-8 @ piperack below 11.5 M.Lvl (@ 6.0m Lvl) i.e Wing-II Section 7-7 @ piperack below 11.5 M.Lvl (@ 6.0m Lvl) i.e Wing-I Section 6-6 @ piperack below 11.5 M.Lvl (@ 6.0m Lvl) i.e Wing-I

@20-11-2021 @15-11-2021 @20-11-2021 @15-11-2021 @20-11-2021 @15-11-2021 @20-11-2021 @15-11-2021

S.no Pipe description MOC Insulation Pipe line size Pipe line size Remarks S.no Pipe description MOC Insulation Pipe line size Pipe line size Remarks S.no Pipe description MOC Insulation Pipe line size Pipe line size Remarks S.no Pipe description MOC Insulation Pipe line size Pipe line size Remarks

1 SF-1 Supply MS1 Hot 50 150 1 SF-1 Supply MS1 Hot 50 80 1 SF-1 Supply MS1 Hot 50 80 1 SF-1 Supply MS1 Hot 50 150

2 SF-1 Return MS1 Hot 50 150 2 SF-1 Return MS1 Hot 50 80 2 SF-1 Return MS1 Hot 50 80 2 SF-1 Return MS1 Hot 50 150

1 SF-2 Supply MS1 50 150 1 SF-2 Supply MS1 50 80 1 SF-2 Supply MS1 NA 50 80 1 SF-2 Supply MS1 50 150

2 SF-2 Return MS1 50 150 2 SF-2 Return MS1 50 80 2 SF-2 Return MS1 NA 50 80 2 SF-2 Return MS1 50 150

3 SF-3 Supply MS1 cold 25 100 3 SF-3 Supply MS1 cold 25 80 3 SF-3 Supply MS1 cold 25 80 3 SF-3 Supply MS1 cold 25 100

4 SF-3 Return MS1 cold 25 100 4 SF-3 Return MS1 cold 25 80 4 SF-3 Return MS1 cold 25 80 4 SF-3 Return MS1 cold 25 100
SS304/ SS304/ SS304/ SS304/
5 Nitrogen SS316 NA 40 40 5 Nitrogen SS316 NA 40 40 5 Nitrogen SS316 NA 40 40 5 Nitrogen SS316 NA 40 40
SS304/ SS304/ SS304/ SS304/
6 Instrument air SS316 NA 40 25 6 Instrument air SS316 NA 40 25 6 Instrument air SS316 NA 40 25 6 Instrument air SS316 NA 40 25
SS304/ SS304/ SS304/ SS304/
7 Breathing air SS316 NA 25 25 7 Breathing air SS316 NA 25 25 7 Breathing air SS316 NA 25 25 7 Breathing air SS316 NA 25 25

9 Solvent-02 (Fresh) SS316 NA 40 40 9 Solvent-02 (Fresh) SS316 NA 40 40 9 Solvent-02 (Fresh) SS316 NA 40 40 9 Solvent-02 (Fresh) SS316 NA 40 40

12 Solvent-05 (Recovered) MSPTFE NA 40 40 10 Spent-01 SS316 NA 40 40 10 Spent-01 SS316 NA 40 40 10 Solvent-03 (Fresh) MSPTFE NA 40 40

13 Spent-01 SS316 NA 40 40 11 Spent-03 MSPTFE NA 40 40 11 Spent-03 MSPTFE NA 40 40 11 Solvent-04 (Recovered) SS316 NA 40 40

NA PPFRP/ NA 100 100 PPFRP/ NA 100 100 NA 40 40


14 Spent-02 SS316 40 40 12 Alkaline Scrubber MSHDPE 12 Alkaline Scrubber MSHDPE 12 Solvent-05 (Recovered) MSPTFE
PPFRP/ PPFRP/
15 Spent-03 MSPTFE NA 40 40 13 Acidic scrubber NA 100 100 13 Acidic scrubber NA 100 100 13 Spent-01 SS316 NA 40 40
MSHDPE MSHDPE

16 Alkaline Scrubber PPFRP/MSHDPE NA 150 100 14 Knock Out Line MS1 NA 100 80 14 Knock Out Line MS1 NA 100 80 14 Spent-02 SS316 NA 40 40
SS304/ SS304/
17 Acidic scrubber PPFRP/MSHDPE NA 150 100 15 Potable Water line SS316 NA 50 40 15 Potable Water line SS316 NA 50 40 15 Spent-03 MSPTFE NA 40 40
SS304/ SS304/ SS304/
19 Potable Water line SS316 NA 50 40 16 Vaccum-line(VP-608) SS316 NA 80 80 16 Vaccum-line(VP-607) SS316 NA 80 80 16 Alkaline Scrubber PPFRP/MSHDPE NA 100 100
SS304/
Vaccum-line(VP-610) SS316 NA 80 80 17 Acidic scrubber PPFRP/MSHDPE NA 100 100

Knock Out Line MS1 NA 80 80 18 Knock Out Line MS1 NA 100 80


SS304/
19 Potable Water line SS316 NA 50 40
SS304/
20 Vaccum-line(VP-601) SS316 NA 80 80
Piperack below 6.0 M.Lvl (@ 0.0 m Lvl)
Section 5-5 @ piperack below 6.0 M.Lvl (@ 0.0m Lvl) i.e Wing-II Section 4-4 @ piperack below 6.0 M.Lvl (@ 0.0m Lvl) i.e Wing-II Section 3-3 @ piperack below 6.0 M.Lvl (@ 0.0m Lvl) i.e Wing-I Section 2-2 @ piperack below 6.0 M.Lvl (@ 0.0m Lvl) i.e Wing-I

@20-11-2021 @15-11-2021 @20-11-2021 @15-11-2021 @20-11-2021 @15-11-2021 @20-11-2021 @15-11-2021

S.no Pipe description MOC Insulation Pipe line size Pipe line size Remarks S.no Pipe description MOC Insulation Pipe line size Pipe line size Remarks S.no Pipe description MOC Insulation Pipe line size Pipe line size Remarks S.no Pipe description MOC Insulation Pipe line size Pipe line size Remarks

1 SF-1 Supply MS1 Hot 80 100 1 SF-1 Supply MS1 Hot 80 50 1 SF-1 Supply MS1 Hot 80 50 1 SF-1 Supply MS1 Hot 80

2 SF-1 Return MS1 Hot 80 100 2 SF-1 Return MS1 Hot 80 50 2 SF-1 Return MS1 Hot 80 50 2 SF-1 Return MS1 Hot 80

1 SF-2 Supply MS1 80 100 1 SF-2 Supply MS1 80 50 1 SF-2 Supply MS1 80 50 1 SF-2 Supply MS1 NA 80

2 SF-2 Return MS1 80 100 2 SF-2 Return MS1 80 50 2 SF-2 Return MS1 80 50 2 SF-2 Return MS1 NA 80

3 SF-3 Supply MS1 cold 40 40 3 SF-3 Supply MS1 cold 40 25 3 SF-3 Supply MS1 cold 40 25 3 SF-3 Supply MS1 cold 40

4 SF-3 Return MS1 cold 40 40 4 SF-3 Return MS1 cold 40 25 4 SF-3 Return MS1 cold 40 25 4 SF-3 Return MS1 cold 40
SS304/ SS304/ SS304/ SS304/
5 Nitrogen SS316 NA 40 40 5 Nitrogen SS316 NA 40 40 5 Nitrogen SS316 NA 40 40 5 Nitrogen SS316 NA 40
SS304/ SS304/ SS304/ SS304/
6 Instrument air SS316 NA 40 25 6 Instrument air SS316 NA 40 40 6 Instrument air SS316 NA 40 40 6 Instrument air SS316 NA 40
SS304/ SS304/ SS304/ SS304/
7 Breathing air SS316 NA 25 25 7 Breathing air SS316 NA 25 25 7 Breathing air SS316 NA 25 25 7 Breathing air SS316 NA 25

9 Solvent-02 (Fresh) SS316 NA 40 40 9 Solvent-02 (Fresh) SS316 NA 40 40 9 Solvent-02 (Fresh) SS316 NA 40 40 9 Solvent-02 (Fresh) SS316 NA 40

12 Spent-02 SS316 NA 40 40 12 Spent-02 SS316 NA 40 40 12 Spent-02 SS316 NA 40 40 10 Spent-01 SS316 NA 40

13 Spent-03 MSPTFE NA 40 40 13 Spent-03 MSPTFE NA 40 40 13 Spent-03 MSPTFE NA 40 40 11 Spent-03 MSPTFE NA 40


PPFRP/ PPFRP/
14 Alkaline Scrubber PPFRP/MSHDPE NA 100 100 14 Alkaline Scrubber NA 100 100 14 Alkaline Scrubber NA 100 100 12 Alkaline Scrubber PPFRP/MSHDPE NA 100
MSHDPE MSHDPE
PPFRP/MSHDPE NA PPFRP/ NA PPFRP/ NA PPFRP/MSHDPE NA
15 Acidic scrubber 100 100 15 Acidic scrubber MSHDPE 100 100 15 Acidic scrubber MSHDPE 100 100 13 Acidic scrubber 100
SS304/ SS304/ SS304/
16 Potable Water line SS316 NA 50 40 16 Potable Water line SS316 NA 50 40 16 Potable Water line SS316 NA 50 40 14 Knock Out Line MS1 NA 100
SS304/ SS304/ SS304/ SS304/
17 Vaccum-line(VP-610) SS316 NA 80 80 17 Vaccum-line(VP-610) SS316 NA 80 80 17 Vaccum-line(VP-610) SS316 NA 80 80 15 Potable Water line SS316 NA 50
SS304/
16 Vaccum-line(VP-607) SS316 NA 80
COMPLETE UTILTY SUMMARY FOR LEVO & MYCO
(INCLUDING GENERATION & DISTRIBUTION)

Generation Distribution

Utility service Remarks


Required Heat load Heat exchanger/ chiller Pumps Header sizes

Calculated Heat load Considered heat load m2/TR Calculated flow Selected flow rate for pumps Calculated Suction header Selected Suction header Calculated discharge header Selected discharge header
(Kcal/hr) (Kcal/hr) (In mm) (in mm) (In mm) (in mm)

75 m3/hr x 3 nos
SF-1 @ 130 deg C 687864 756650 TBD 164 241 200 170 150
(2 w+1 std)

100 m3/hr x 3 nos


SF-2 @ 32 deg C 888909 977800 TBD 212 (2 w+1 std) 274 250 194 200

Primary pumps:50 m3/hr X 30 mlc @ 3 nos


(2 w+1 std)
SF-3 @ 10 deg C 367942 404736 256 TR chiller is required 94 Secondary pumps:50 m3/hr X --mlc @ 3 nos 182 150 129 200
(2 w+1 std)

SF-4 @ -20 deg C 118561 130417 60 TR chiller is required 31 Primary pumps:25 m3/hr X 30 mlc @ 2 nos 104 100 74 80
(1 w+1 std)
Secondary pumps:25 m3/hr X --mlc @ 2 nos
(1 w+1 std)
UTILITY SERVICES

Stream SF1 SF2 SF3 SF4


S.no Block Description
Description

Calculated Selected Pipe Selected Pipe Selected Pipe


Flow rate Heat load Flow rate Heat load Pipe line size Flow rate Heat load Pipe line Flow rate Heat load Pipe line size Selected Pipe line
Pipe line size line size (In line size (In line size (In
(m3/hr) (Kcal/hr) (m3/hr) (Kcal/hr) (In mm) (m3/hr) (TR) size (In mm) (m3/hr) (TR) (In mm) size (In mm)
(In mm) mm) mm) mm)

1 Levo Levo 45 208425 89 100 53 233841 97 100 33 47 76 100 6 8 32 50

2 Myco Myco 130 600827 152 150 185 811935 181 200 68 96 109 100 27 38 69 80

Total 175 809252 176 200 239 1045776 206 200 101 143 133 150 33 46 76 80

Flow with Block Diversity @ 85% 149 687864 162 200 203 888909 190 200 85 122 123 150 28 39 70 80
MULTIPURPOSE UTILITY CALCULATION
Capacity dia s.ht m.w.v
0.25KL 600 900 0.225
Diameter of the vessel D 2750 mm 2.75 m 0.5KL 800 1200 0.45
Length of shell L 3840 mm 3.84 m 0.63KL 850 1200 0.567
Total volume in the vessel 16000 L 16.00 KL 0.8KL 900 1200 0.72
1KL 1000 1400 0.9
Dish volume 2.04 m3 1.6KL 1150 1600 1.44
Liquid head in shell 2.4 m 2KL 1200 1750 1.8
HTA avilable on shell 20.3 m2 2.5KL 1350 1800 2.25
HTA avilable on dish 7.2 m2 3KL 1400 2000 2.7
Total HTA available A 28.50 m2 4KL 1550 2300 3.6
5KL 1650 2400 4.5
6KL 1750 2600 5.4
8KL1900 2900 7.2
STEAM(2Kg/cm2 Absolute,1Kg/cm2 Gauge) 10KL 2050 3000 9.0
Assume UDtm #REF! EQUIPMENT DIMENSION CALCULATION
Energy supplied by vessl Q #REF! kcal/hr
Latent heat l 510 kcal/kg L/D= 1.2
Mass flow rate of steam w #REF! kg/hr If Capacity≥ 1KL 2700 Max.Wor vol
Density r 1.08 Kg/m3 Capacity 3 KL 3000 L
Steam Inlet Temp TsteamIN 120 °C Diameter D 1.4713 m 1471 mm
Steam OUT Temp TsteamOUT 120 °C Length L 1.7655 m 1766 mm
Steam Velocity V 25 m/s If Capacity< 1KL 225 Max.Wor vol
Capacity 250 L 0.25 KL
Pipe line size For steam NB #REF! mm Diameter D 0.6426 m 643 mm
Length L 0.7712 m 771 mm
CTW
Assume UDtm #REF! For Reactors Line sizes
Energy supplied by vessl Q #REF! kcal/hr CT Water flow rate
Density r 996.8 Kg/m3 #REF! m3/hr #REF!
Specific Heat Cp 1.0006 Kcal/Kg°C For main Condensers
∆t 5 °C CT Water flow rate while distillation/reflux
CTW Inlet Temp TCIN 32 °C #REF! m3/hr #REF!
CTW OUT Temp TCOUT 37 °C
Cooling Water Velocity V 1.5 m/s

CHB For Reactors Line sizes


Assume UDtm #REF! CHB flow rate for reactors
Energy supplied by vessl Q #REF! kcal/hr #REF! m3/hr #REF! TR #REF!
Brine density r 939.13 Kg/m3 For main Condensers
Brine Specific heat Cp 0.8658 kcal/kg°C CHB flow rate while distillation/reflux
∆t 5 °C #REF! m3/hr #REF! TR #REF!
CHB Inlet Temp TCHBIN -15 °C
CHB Out Temp TCHBOUT -10 °C For vent Condensers
Brine Velocity V 1.5 m/s CHB flowrate while distillation & Reflux
#REF! m3/hr #REF! TR #REF!
CHW
Assume UDtm #REF! For Reactors
Energy supplied by vessl Q #REF! kcal/hr CHW flow rate for reactors
Chilled Water density r 1000.0 Kg/m3 #REF! m3/hr #REF! TR #REF!
Chilled Water Specific heat Cp 1.0 kcal/kg°C For Main Condensers
∆t 5 °C CHW flowrate while distillation & Reflux
CHW Inlet Temp TCHWIN 8 °C #REF! m3/hr #REF! TR #REF!
CHW Out Temp TCHWOUT 13 °C
Chilled Water Velocity V 1.5 m/s For Vent Condensers
#REF! m3/hr #REF! TR #REF!
HW
Assume UDtm 6000 For Reactors Line sizes
Energy supplied by vessl Q 171000.0 kcal/hr HW flow rate for reactors
Hot Water density r 1000.0 Kg/m3 17.1 m3/hr 55.0
Hot Water Specific heat Cp 1.0 kcal/kg°C
∆t 10 °C
HW Inlet Temp TCHWIN 70 °C
HW Out Temp TCHWOUT 60 °C
Hot Water Velocity V 2 m/s

CA For jacket /Limpet emptying


Reactor diametre RD 2750 2.8 m
Reactor Shell Height Rsh 3840 3.84 m
Reactor Volume Rv 22.80 KL
Jacketed Reactor Diametre JD 2850.00 mm 2.85 m
Jacketed Reactor Shell Height Jsh 3690.00 mm 3.69 m
Jacketed Reactor Volume Jvs 23.528 KL
Jacket volume Jv=(Jvs-Rv) 0.732 KL 732 L
Transfer Time say 5minits t 0.08 hr
Transfer Rate Qt 9.15 m3/Hr 13.71824 m3/Hr
Compressed Air Velocity V 15 m/s
Pipe line size for reactor NB 18.0 mm CA Flow rate CA Flow rate
13.718 m3/hr 8.07 CFM
N2
Max Working Volume in the reactor VWMax 22796 Lts
Transfer Time t 0.5 hr
Transfer Rate Qt 45593 Lts/Hr 45.6 m3/hr
N2 Velocity 15 m/s 68.389 Nm3/hr
N2 Flow rate
Pipe line size for reactor NB 40.2 mm 68.4 Nm3/hr
MULTIPURPOSE UTILITY CALCULATION
Capacity dia s.ht m.w.v
0.25KL 600 900 0.225
Diameter of the vessel D 1950 mm 1.95 m 0.5KL 800 1200 0.45
Length of shell L 3050 mm 3.05 m 0.63KL 850 1200 0.567
Total volume in the vessel 6300 L 6.30 KL 0.8KL 900 1200 0.72
1KL 1000 1400 0.9
Dish volume 0.73 m3 1.6KL 1150 1600 1.44
Liquid head in shell 1.9 m 2KL 1200 1750 1.8
HTA avilable on shell 11.4 m2 2.5KL 1350 1800 2.25
HTA avilable on dish 3.6 m2 3KL 1400 2000 2.7
Total HTA available A 18.00 m2 4KL 1550 2300 3.6
5KL 1650 2400 4.5
6KL 1750 2600 5.4
8KL1900 2900 7.2
STEAM(2Kg/cm2 Absolute,1Kg/cm2 Gauge) 10KL 2050 3000 9.0
Assume UDtm #REF! EQUIPMENT DIMENSION CALCULATION
Energy supplied by vessl Q #REF! kcal/hr
Latent heat l 510 kcal/kg L/D= 1.2
Mass flow rate of steam w #REF! kg/hr If Capacity≥ 1KL 2700 Max.Wor vol
Density r 1.08 Kg/m3 Capacity 3 KL 3000 L
Steam Inlet Temp TsteamIN 120 °C Diameter D 1.4713 m 1471 mm
Steam OUT Temp TsteamOUT 120 °C Length L 1.7655 m 1766 mm
Steam Velocity V 25 m/s If Capacity< 1KL 225 Max.Wor vol
Capacity 250 L 0.25 KL
Pipe line size For steam NB #REF! mm Diameter D 0.6426 m 643 mm
Length L 0.7712 m 771 mm
CTW
Assume UDtm #REF! For Reactors Line sizes
Energy supplied by vessl Q #REF! kcal/hr CT Water flow rate
Density r 996.8 Kg/m3 #REF! m3/hr #REF!
Specific Heat Cp 1.0006 Kcal/Kg°C For main Condensers
∆t 5 °C CT Water flow rate while distillation/reflux
CTW Inlet Temp TCIN 32 °C #REF! m3/hr #REF!
CTW OUT Temp TCOUT 37 °C
Cooling Water Velocity V 1.5 m/s

CHB For Reactors Line sizes


Assume UDtm #REF! CHB flow rate for reactors
Energy supplied by vessl Q #REF! kcal/hr #REF! m3/hr #REF! TR #REF!
Brine density r 939.13 Kg/m3 For main Condensers
Brine Specific heat Cp 0.8658 kcal/kg°C CHB flow rate while distillation/reflux
∆t 5 °C #REF! m3/hr #REF! TR #REF!
CHB Inlet Temp TCHBIN -15 °C
CHB Out Temp TCHBOUT -10 °C For vent Condensers
Brine Velocity V 1.5 m/s CHB flowrate while distillation & Reflux
#REF! m3/hr #REF! TR #REF!
CHW
Assume UDtm #REF! For Reactors
Energy supplied by vessl Q #REF! kcal/hr CHW flow rate for reactors
Chilled Water density r 1000.0 Kg/m3 #REF! m3/hr #REF! TR #REF!
Chilled Water Specific heat Cp 1.0 kcal/kg°C For Main Condensers
∆t 5 °C CHW flowrate while distillation & Reflux
CHW Inlet Temp TCHWIN 8 °C #REF! m3/hr #REF! TR #REF!
CHW Out Temp TCHWOUT 13 °C
Chilled Water Velocity V 1.5 m/s For Vent Condensers
#REF! m3/hr #REF! TR #REF!
HW
Assume UDtm 6000 For Reactors Line sizes
Energy supplied by vessl Q 108000.0 kcal/hr HW flow rate for reactors
Hot Water density r 1000.0 Kg/m3 10.8 m3/hr 43.7
Hot Water Specific heat Cp 1.0 kcal/kg°C
∆t 10 °C
HW Inlet Temp TCHWIN 70 °C
HW Out Temp TCHWOUT 60 °C
Hot Water Velocity V 2 m/s

CA For jacket /Limpet emptying


Reactor diametre RD 1950 2.0 m
Reactor Shell Height Rsh 3050 3.05 m
Reactor Volume Rv 9.10 KL
Jacketed Reactor Diametre JD 2050.00 mm 2.05 m
Jacketed Reactor Shell Height Jsh 2900.00 mm 2.9 m
Jacketed Reactor Volume Jvs 9.567 KL
Jacket volume Jv=(Jvs-Rv) 0.463 KL 463 L
Transfer Time say 5minits t 0.08 hr
Transfer Rate Qt 5.79 m3/Hr 8.678543 m3/Hr
Compressed Air Velocity V 15 m/s
Pipe line size for reactor NB 14.3 mm CA Flow rate CA Flow rate
8.679 m3/hr 5.10 CFM
N2
Max Working Volume in the reactor VWMax 9104 Lts
Transfer Time t 0.5 hr
Transfer Rate Qt 18208 Lts/Hr 18.2 m3/hr
N2 Velocity 15 m/s 27.312 Nm3/hr
N2 Flow rate
Pipe line size for reactor NB 25.4 mm 27.3 Nm3/hr
MULTIPURPOSE UTILITY CALCULATION
Capacity dia s.ht m.w.v
0.25KL 600 900 0.225
Diameter of the vessel D 2750 mm 2.75 m 0.5KL 800 1200 0.45
Length of shell L 3840 mm 3.84 m 0.63KL 850 1200 0.567
Total volume in the vessel 16000 L 16.00 KL 0.8KL 900 1200 0.72
1KL 1000 1400 0.9
Dish volume 2.04 m3 1.6KL 1150 1600 1.44
Liquid head in shell 2.4 m 2KL 1200 1750 1.8
HTA avilable on shell 20.3 m2 2.5KL 1350 1800 2.25
HTA avilable on dish 7.2 m2 3KL 1400 2000 2.7
Total HTA available A 28.50 m2 4KL 1550 2300 3.6
5KL 1650 2400 4.5
6KL 1750 2600 5.4
8KL1900 2900 7.2
STEAM(2Kg/cm2 Absolute,1Kg/cm2 Gauge) 10KL 2050 3000 9.0
Assume UDtm #REF! EQUIPMENT DIMENSION CALCULATION
Energy supplied by vessl Q #REF! kcal/hr
Latent heat l 510 kcal/kg L/D= 1.2
Mass flow rate of steam w #REF! kg/hr If Capacity≥ 1KL 2700 Max.Wor vol
Density r 1.08 Kg/m3 Capacity 3 KL 3000 L
Steam Inlet Temp TsteamIN 120 °C Diameter D 1.4713 m 1471 mm
Steam OUT Temp TsteamOUT 120 °C Length L 1.7655 m 1766 mm
Steam Velocity V 25 m/s If Capacity< 1KL 225 Max.Wor vol
Capacity 250 L 0.25 KL
Pipe line size For steam NB #REF! mm Diameter D 0.6426 m 643 mm
Length L 0.7712 m 771 mm
CTW
Assume UDtm #REF! For Reactors Line sizes
Energy supplied by vessl Q #REF! kcal/hr CT Water flow rate
Density r 996.8 Kg/m3 #REF! m3/hr #REF!
Specific Heat Cp 1.0006 Kcal/Kg°C For main Condensers
∆t 5 °C CT Water flow rate while distillation/reflux
CTW Inlet Temp TCIN 32 °C #REF! m3/hr #REF!
CTW OUT Temp TCOUT 37 °C
Cooling Water Velocity V 1.5 m/s

CHB For Reactors Line sizes


Assume UDtm #REF! CHB flow rate for reactors
Energy supplied by vessl Q #REF! kcal/hr #REF! m3/hr #REF! TR #REF!
Brine density r 939.13 Kg/m3 For main Condensers
Brine Specific heat Cp 0.8658 kcal/kg°C CHB flow rate while distillation/reflux
∆t 5 °C #REF! m3/hr #REF! TR #REF!
CHB Inlet Temp TCHBIN -15 °C
CHB Out Temp TCHBOUT -10 °C For vent Condensers
Brine Velocity V 1.5 m/s CHB flowrate while distillation & Reflux
#REF! m3/hr #REF! TR #REF!
CHW
Assume UDtm #REF! For Reactors
Energy supplied by vessl Q #REF! kcal/hr CHW flow rate for reactors
Chilled Water density r 1000.0 Kg/m3 #REF! m3/hr #REF! TR #REF!
Chilled Water Specific heat Cp 1.0 kcal/kg°C For Main Condensers
∆t 5 °C CHW flowrate while distillation & Reflux
CHW Inlet Temp TCHWIN 8 °C #REF! m3/hr #REF! TR #REF!
CHW Out Temp TCHWOUT 13 °C
Chilled Water Velocity V 1.5 m/s For Vent Condensers
#REF! m3/hr #REF! TR #REF!
HW
Assume UDtm 6000 For Reactors Line sizes
Energy supplied by vessl Q 171000.0 kcal/hr HW flow rate for reactors
Hot Water density r 1000.0 Kg/m3 17.1 m3/hr 55.0
Hot Water Specific heat Cp 1.0 kcal/kg°C
∆t 10 °C
HW Inlet Temp TCHWIN 70 °C
HW Out Temp TCHWOUT 60 °C
Hot Water Velocity V 2 m/s

CA For jacket /Limpet emptying


Reactor diametre RD 2750 2.8 m
Reactor Shell Height Rsh 3840 3.84 m
Reactor Volume Rv 22.80 KL
Jacketed Reactor Diametre JD 2850.00 mm 2.85 m
Jacketed Reactor Shell Height Jsh 3690.00 mm 3.69 m
Jacketed Reactor Volume Jvs 23.528 KL
Jacket volume Jv=(Jvs-Rv) 0.732 KL 732 L
Transfer Time say 5minits t 0.08 hr
Transfer Rate Qt 9.15 m3/Hr 13.71824 m3/Hr
Compressed Air Velocity V 15 m/s
Pipe line size for reactor NB 18.0 mm CA Flow rate CA Flow rate
13.718 m3/hr 8.07 CFM
N2
Max Working Volume in the reactor VWMax 22796 Lts
Transfer Time t 0.5 hr
Transfer Rate Qt 45593 Lts/Hr 45.6 m3/hr
N2 Velocity 15 m/s 68.389 Nm3/hr
N2 Flow rate
Pipe line size for reactor NB 40.2 mm 68.4 Nm3/hr
MULTIPURPOSE UTILITY CALCULATION
Capacity dia s.ht m.w.v
0.25KL 600 900 0.225
Diameter of the vessel D 1950 mm 1.95 m 0.5KL 800 1200 0.45
Length of shell L 3050 mm 3.05 m 0.63KL 850 1200 0.567
Total volume in the vessel 6300 L 6.30 KL 0.8KL 900 1200 0.72
1KL 1000 1400 0.9
Dish volume 0.73 m3 1.6KL 1150 1600 1.44
Liquid head in shell 1.9 m 2KL 1200 1750 1.8
HTA avilable on shell 11.4 m2 2.5KL 1350 1800 2.25
HTA avilable on dish 3.6 m2 3KL 1400 2000 2.7
Total HTA available A 18.00 m2 4KL 1550 2300 3.6
5KL 1650 2400 4.5
6KL 1750 2600 5.4
8KL1900 2900 7.2
STEAM(2Kg/cm2 Absolute,1Kg/cm2 Gauge) 10KL 2050 3000 9.0
Assume UDtm #REF! EQUIPMENT DIMENSION CALCULATION
Energy supplied by vessl Q #REF! kcal/hr
Latent heat l 510 kcal/kg L/D= 1.2
Mass flow rate of steam w #REF! kg/hr If Capacity≥ 1KL 2700 Max.Wor vol
Density r 1.08 Kg/m3 Capacity 3 KL 3000 L
Steam Inlet Temp TsteamIN 120 °C Diameter D 1.4713 m 1471 mm
Steam OUT Temp TsteamOUT 120 °C Length L 1.7655 m 1766 mm
Steam Velocity V 25 m/s If Capacity< 1KL 225 Max.Wor vol
Capacity 250 L 0.25 KL
Pipe line size For steam NB #REF! mm Diameter D 0.6426 m 643 mm
Length L 0.7712 m 771 mm
CTW
Assume UDtm #REF! For Reactors Line sizes
Energy supplied by vessl Q #REF! kcal/hr CT Water flow rate
Density r 996.8 Kg/m3 #REF! m3/hr #REF!
Specific Heat Cp 1.0006 Kcal/Kg°C For main Condensers
∆t 5 °C CT Water flow rate while distillation/reflux
CTW Inlet Temp TCIN 32 °C #REF! m3/hr #REF!
CTW OUT Temp TCOUT 37 °C
Cooling Water Velocity V 1.5 m/s

CHB For Reactors Line sizes


Assume UDtm #REF! CHB flow rate for reactors
Energy supplied by vessl Q #REF! kcal/hr #REF! m3/hr #REF! TR #REF!
Brine density r 939.13 Kg/m3 For main Condensers
Brine Specific heat Cp 0.8658 kcal/kg°C CHB flow rate while distillation/reflux
∆t 5 °C #REF! m3/hr #REF! TR #REF!
CHB Inlet Temp TCHBIN -15 °C
CHB Out Temp TCHBOUT -10 °C For vent Condensers
Brine Velocity V 1.5 m/s CHB flowrate while distillation & Reflux
#REF! m3/hr #REF! TR #REF!
CHW
Assume UDtm #REF! For Reactors
Energy supplied by vessl Q #REF! kcal/hr CHW flow rate for reactors
Chilled Water density r 1000.0 Kg/m3 #REF! m3/hr #REF! TR #REF!
Chilled Water Specific heat Cp 1.0 kcal/kg°C For Main Condensers
∆t 5 °C CHW flowrate while distillation & Reflux
CHW Inlet Temp TCHWIN 8 °C #REF! m3/hr #REF! TR #REF!
CHW Out Temp TCHWOUT 13 °C
Chilled Water Velocity V 1.5 m/s For Vent Condensers
#REF! m3/hr #REF! TR #REF!
HW
Assume UDtm 6000 For Reactors Line sizes
Energy supplied by vessl Q 108000.0 kcal/hr HW flow rate for reactors
Hot Water density r 1000.0 Kg/m3 10.8 m3/hr 43.7
Hot Water Specific heat Cp 1.0 kcal/kg°C
∆t 10 °C
HW Inlet Temp TCHWIN 70 °C
HW Out Temp TCHWOUT 60 °C
Hot Water Velocity V 2 m/s

CA For jacket /Limpet emptying


Reactor diametre RD 1950 2.0 m
Reactor Shell Height Rsh 3050 3.05 m
Reactor Volume Rv 9.10 KL
Jacketed Reactor Diametre JD 2050.00 mm 2.05 m
Jacketed Reactor Shell Height Jsh 2900.00 mm 2.9 m
Jacketed Reactor Volume Jvs 9.567 KL
Jacket volume Jv=(Jvs-Rv) 0.463 KL 463 L
Transfer Time say 5minits t 0.08 hr
Transfer Rate Qt 5.79 m3/Hr 8.678543 m3/Hr
Compressed Air Velocity V 15 m/s
Pipe line size for reactor NB 14.3 mm CA Flow rate CA Flow rate
8.679 m3/hr 5.10 CFM
N2
Max Working Volume in the reactor VWMax 9104 Lts
Transfer Time t 0.5 hr
Transfer Rate Qt 18208 Lts/Hr 18.2 m3/hr
N2 Velocity 15 m/s 27.312 Nm3/hr
N2 Flow rate
Pipe line size for reactor NB 25.4 mm 27.3 Nm3/hr
UTILITY REQUIRMENT FOR ANFD

Capacity of ANFD = 3.5 m2


Working Volume = 3500 L

Maximum Cake volume = 2200 L

Drying Time = 3

Water to be evoprated = 433.3333333 Kg/Lit

Latent Heat = 570 Kcal/kg at 50oC

Heat Load = 247000 Kcal/hr

Steam Requirement = 484.3137255 Kg/hr

Cooling Water Requirement = 49.4 m3/hr


Chilled Water Requirement = 81.680 TR

Consider (10%) Head Load = 8.168 TR

Chilled Brine Requirement = 81.680 TR

Consider (10%) Head Load = 8.168 TR

UTILITY REQUIRMENT FOR ANFD

Capacity of ANFD = 0.75 m2

Working Volume = 500 L


Maximum Cake volume = 200 L

Drying Time = 3

Water to be evoprated = 100 Kg/Lit

Latent Heat = 570 Kcal/kg at 50oC

Heat Load = 57000 Kcal/hr

Steam Requirement = 111.7647059 Kg/hr

Cooling Water Requirement = 11.4 m3/hr

Chilled Water Requirement = 18.849 TR

Consider (10%) Head Load = 1.885 TR


Chilled Brine Requirement = 18.849 TR

Consider (10%) Head Load = 1.885 TR

UTILITY REQUIRMENT FOR ANFD

Capacity of ANFD = 5 m2

Working Volume = 5000 L

Maximum Cake volume = 2200 L

Drying Time = 3
Water to be evoprated = 933.3333333 Kg/Lit

Latent Heat = 570 Kcal/kg at 50oC

Heat Load = 532000 Kcal/hr

Steam Requirement = 1043.1373 Kg/hr


Cooling Water Requirement = 106.4000 m3/hr

Chilled Water Requirement = 175.9259 TR

Consider (10%) Head Load = 17.593 TR

Chilled Brine Requirement = 175.9259 TR

Consider (10%) Head Load = 17.593 TR

UTILITY REQUIRMENT FOR ANFD

Capacity of ANFD = 0.25 m2


Working Volume = 150 L

Maximum Cake volume = 70 L

Drying Time = 3

Water to be evoprated = 26.66666667 Kg/Lit

Latent Heat = 570 Kcal/kg at 50oC

Heat Load = 15200 Kcal/hr

Steam Requirement = 29.8039 Kg/hr

Cooling Water Requirement = 3.0400 m3/hr


Chilled Water Requirement = 5.0265 TR

Consider (10%) Head Load = 0.503 TR

Chilled Brine Requirement = 5.0265 TR

Consider (10%) Head Load = 0.503 TR

UTILITY REQUIRMENT FOR ANFD

Capacity of ANFD = 1.5 m2

Working Volume = 1500 L

Maximum Cake volume = 600 L


Drying Time = 3

Water to be evoprated = 300 Kg/Lit

Latent Heat = 570 Kcal/kg at 50oC

Heat Load = 171000 Kcal/hr


Steam Requirement = 335.2941 Kg/hr

Cooling Water Requirement = 34.2000 m3/hr

Chilled Water Requirement = 56.5476 TR

Consider (10%) Head Load = 5.655 TR


Chilled Brine Requirement = 56.5476 TR

Consider (10%) Head Load = 5.655 TR

UTILITY REQUIRMENT FOR ANFD

Capacity of ANFD = 2.5 m2

Working Volume = 2500 L

Maximum Cake volume = 1400 L


Drying Time = 3

Water to be evoprated = 366.6666667 Kg/Lit

Latent Heat = 570 Kcal/kg at 50oC

Heat Load = 209000 Kcal/hr

Steam Requirement = 409.8039 Kg/hr

Cooling Water Requirement = 41.8000 m3/hr

Chilled Water Requirement = 69.1138 TR

Consider (10%) Head Load = 6.911 TR


Chilled Brine Requirement = 69.1138 TR

Consider (10%) Head Load = 6.911 TR

UTILITY REQUIRMENT FOR ANFD

Capacity of ANFD = 0.5 m2

Working Volume = 500 L

Maximum Cake volume = 200 L

Drying Time = 3

Water to be evoprated = 100 Kg/Lit


Latent Heat = 570 Kcal/kg at 50oC

Heat Load = 57000 Kcal/hr

Steam Requirement = 111.7647 Kg/hr

Cooling Water Requirement = 11.4000 m3/hr

Chilled Water Requirement = 18.8492 TR

Consider (10%) Head Load = 1.885 TR

Chilled Brine Requirement = 18.8492 TR

Consider (10%) Head Load = 1.885 TR


UTILITY REQUIRMENT FOR ANFD

Capacity of ANFD = 1.1 m2

Working Volume = 750 L


Maximum Cake volume = 300 L

Drying Time = 3

Water to be evoprated = 150 Kg/Lit

Latent Heat = 570 Kcal/kg at 50oC

Heat Load = 85500 Kcal/hr

Steam Requirement = 167.6471 Kg/hr

Cooling Water Requirement = 17.1000 m3/hr

Chilled Water Requirement = 28.2738 TR


Consider (10%) Head Load = 2.827 TR

Chilled Brine Requirement = 28.2738 TR

Consider (10%) Head Load = 2.827 TR

UTILITY REQUIRMENT FOR ANFD


Capacity of ANFD = 4 m2

Working Volume = 4000 L

Maximum Cake volume = 2200 L

Drying Time = 3

Water to be evoprated = 600 Kg/Lit

Latent Heat = 570 Kcal/kg at 50oC

Heat Load = 342000 Kcal/hr

Steam Requirement = 670.5882 Kg/hr

Cooling Water Requirement = 68.4000 m3/hr


Chilled Water Requirement = 113.0952 TR

Consider (10%) Head Load = 11.310 TR

Chilled Brine Requirement = 113.0952 TR

Consider (10%) Head Load = 11.310 TR


UTILITY REQUIRMENT FOR ROTOCONE VACUUM DRYER

CAPACITY OF RCVD = 1000 Liters


VOLUME OCCUPIED BY MATERIAL(50% assume= 500 Liters
ASSUMED BULK DENSITY AS = 0.8 Kg/Lit
MASS OF MATERIAL = 400 Kg
ASSUME WATER AS MOITURE CONTENT AS IT HAS MAXIMUM HEAT OF VAPORISATON
LOSS OF DRYING(20%) = 0.2
WATER TO BE REMOVED = 80 Kg
TIME OF DRYING = 3 Hours
Normally drying of water will take more time but for peak rate we have considered 3Hrs.
WATER TO BE REMOVED PER HR = 26.666667 Kg/hr
LATENT HEAT = 570 Kcal/kg
HEAT LOAD = 15200 Kcal/hr
STEAM REQUIRMENT = 31.083845 Kg/hr
HW Requirement 1.52
COOLING WATER REQUIRMENT = 3.04 m3/hr
CHILLED WATER REQUIRMENT = 5.026 TR
N2 Requirement
Input Total Volu = 1000 Lts
Output Operation 500 Lts
=
Volume
Cake for
Pressing = 0.5 m3
Time = 30 mins
Flow Requi = 1 Nm3/hr
SRS UTILITY REQUIREMENT
STEAM COOLING TOWER
Phases REQUIRED required Flow
FLOWRATE Rates CALCULATED LINE SIZE
GENERATION DISTRIBUTION LINE SIZE REQUIRED GENERATION (m3/hr) EXISTING LINE SIZE REQUIRED PROPOSED LINE SIZE
(KG/HR) (m3/hr)

Existing requirement
(MPP+FILING) 290 AVAILABLE AVAILABLE 26 1200 150 68 250

Proposed requirement
(STREAM1, PRS SIZE TO BE TO BE VERIFIED FOR
STREAM2,MPP & 2285 AVAILABLE VERIFIED EXISTING & 213 1200 150 195 250
PROPOSED(STREAM1&2)
FILING)

Proposed requirement TO BE VERIFIED FOR


(STREAM1, EXISTING &
STREAM2,MPP , FILING 3200 AVAILABLE TO BE CHECKED 299 1200 150 230 250
PROPOSED(STREAM1&2)
& ASSUMED STREAM 3)

Proposed requirement
(STREAM1, TO BE VERIFIED FOR
STREAM2,MPP , 2595 AVAILABLE TO BE CHECKED EXISTING & 273 1200 150 230 250
ASSUMED STREAM 3, & PROPOSED(STREAM1&2)
4)

ASSUMED DIVERSITY TO BE VERIFIED FOR


80% ON THE TOTAL 2560 AVAILABLE AVAILABLE EXISTING & 239.2 1200 150 206.163005604788 250
REQUIREMENT PROPOSED(STREAM1&2)

You might also like