Sirecon: Sirecon Temperature Monitoring With The SIRECON Unit and OPTILUX Tube Units

h
c
rd
F
s
n
m
ie
S
SIRECON
AX
Installation Instructions
SIRECON
Temperature Monitoring with the SIRECON Unit and

OPTILUX Tube Units
© Siemens, 2001
08870201
08870193
07119030
07119022
07119014
07049823
07049815
07021350
07008910
07008902
05757377
04776253
04776246
04776220
04776212
04776204
04776196
03831604
03831042
03831034
03136004
03135600
© Siemens, 2001
All documents may only be used for rendering
services on Siemens Healthcare Products. Any
document in electronic form may be printed
once. Copy and distribution of electronic docu-
ments and hardcopies is prohibited. Offenders
will be liable for damages. All other rights are re-
served.
Print No.: AX51-030.812.01.04.02 English

Replaces: AX51-030.812.01.03.02 Doc. Gen. Date: 07.09
CSPSSP
3135600
n.a.
2001
2 Copyright / Version / Disclaimer
1Copyright / Version / Disclaimer
Copyright
“© Siemens, 2001“ refers to the copyright of a Siemens entity such as Siemens Aktienge-
sellschaft - Germany, Siemens Mindit Magnetic Resonance Ltd. - China, Siemens Shang-
hai Medical Equipment Ltd. - China, Siemens Medical Solutions USA Inc. - USA and/or
Siemens Healthcare Diagnostics Inc. - USA.
Document Version
Siemens reserves the right to change its products and services at any time.
In addition, manuals are subject to change without notice. The hardcopy documents corre-
spond to the version at the time of system delivery and/or printout. Versions to hardcopy
documentation are not automatically distributed. Please contact your local Siemens office
to order current version or refer to our website http://www.healthcare.siemens.com.
Disclaimer
Siemens provides this documentation “as is“ without the assumption of any liability under
any theory of law.
The installation and service of equipment described herein requires superior understand-
ing of our equipment and may only be performed by qualified personnel who are specially
trained for such installation and/or service.
SIRECON AX51-030.812.01.04.02 Page 2 of 20 © Siemens, 2001

07.09 CSPSSP
Table of Contents 3
0Table of Contents
1 _______ Introduction ____________________________________________________ 5
General Remarks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Image Quality . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
2 _______ Temperature Indicators ___________________________________________ 7
SIREMOBIL Compact / L, SIREMOBIL Iso-C, POWERMOBIL, ARCOSKOP, ARCADIS

Varic and ARCADIS Orbic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
SIRECON 17-2 HDR-C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
SIRECON 23-2 HDR-C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
SIRECON 23-2 int. 1K . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
SIRECON 23-2 R . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
SIRECON 27-2 HDR-C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
SIRECON with Compact Housing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
SIRECON 23-3 HDR-D. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
SIRECON 23-2 HDR-DL. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
SIRECON 23-3 HDR-DX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
SIRECON 23-3 HDR-DQ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
SIRECON 23-DQM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
SIRECON 23 ISX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
SIRECON 33 MD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
SIRECON 33 M. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
SIRECON 23-3 HDR-DA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Access to the Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
SIRECON 17 D-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
SIRECON 23 D-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
SIRECON 17-2 HDR-L . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
SIRECON 17-2 M . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
SIRECON 23-3 HDR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
SIRECON 23-3 HDR-X . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
SIRECON 23-2 HDLE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
SIRECON 23-3 HDR-XD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
SIRECON 23-3 M . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
SIRECON 27-3 HDR. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
SIRECON 33-4 HDR-WD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
SIRECON 33-4 HDR-WA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
SIRECON 33 ISX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
SIRECON 33-4 HDR/W . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
SIRECON 33-4 HDR/W (Angio) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
SIRECON 33-4 HDR. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
SIRECON 33-4 Angio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
SIRECON 30-2 TH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
SIRECON 40-4 HDR E . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
SIRECON 40-4 HDR IS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
SIRECON 40-4 HDR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
SIRECON 40-4 HDR S . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
SIRECON 40-4 HDR S . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
SIRECON 40-4 HDR-A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
© Siemens, 2001 AX51-030.812.01.04.02 Page 3 of 20 SIRECON

07.09 CSPSSP
4 Table of Contents
3 _______ Changes to Previous Version _____________________________________ 20

07.09 CSPSSP
Introduction 5
1-
General Remarks
1Introduction
The SIRECON housing and OPTILUX tube unit are both equipped with temperature indi-
cators for 37°C and 40°C. They are used as confirmation of whether the image intensifier
has been exposures to excessive temperature during transport from the factory to the cus-
tomer’s location.
Information about which image intensifiers have been equipped with temperature indica-
tors, and beginning at which Serial numbers, is given below, relative to the particular image
intensifier.
Indicators 0
Blue adhesive stickers with a temperature printed on them. The basic color of the inside
square is white (temperature not exceeded). If the admissible temperature is exceeded,
that inside square turns black.
37 C 37 C 40 C 40 C
testoterm R testoterm R testoterm R testoterm R
Fig. 1:
The temperature indicators on the SIRECON housing are located in the vicinity of the iden-
tification labels. These indicators must be read prior to beginning installation.
If one or both indicators on the I.I. housing show that the admissible temperature has been
exceeded by a color change, the 37°C indicator on the OPTILUX tube unit absolutely must
be read. Access to these indicators is described on the following pages.
NOTE For SIREMOBIL Compact / L, SIREMOBIL ISO-C, POWERMO-

BIL, ARCOSKOP, ARCADIS Varic and ARCADIS Orbic:
The I.I. models used in these systems have 37°C and 40°C
temperature indicators only on the outside, in the vicinity of
the identification labels. For the procedure, see (SIREMOBIL
Compact / L, SIREMOBIL Iso-C, POWERMOBIL, ARCOSKOP,
ARCADIS Varic and ARCADIS Orbic / p. 7).
If exceeding the admissible temperature of 37°C is also found for the I.I. tube, the
OPTILUX tube unit must also be replaced.

07.09 CSPSSP
6 Introduction
Exceptions: SIRECON 40-4 HDR, SIRECON 33-4 HDR-WA, SIRECON 33-4 HDR/W,
SIRECON 33-4 HDR-WD, SIRECON 23-3 HDR-DA,
SIRECON 23-3 HDR-DQ, SIRECON 23-3 HDR-D,
SIRECON 23-3 HDR-DL, SIRECON 23-3 HDR-DX,
SIRECON 17-2 HDR-L (LITHOSTAR 2), SIRECON 23 ISX,
SIRECON 33 MD and SIRECON 33 are replaced completely.
If no change in color is found, remove the temperature indicators on the SIRECON housing
prior to turning the unit over to the customer.
NOTE Return of the SIRECON unit or the OPTILUX tube unit to the
factory must be made with the completed image intensi-
fier-tube unit questionnaire.
Image Quality 0
If the SIRECON unit or the OPTILUX tube unit is replaced, an image quality test must be
performed and documented in the Test Certificate.

07.09 CSPSSP
Temperature Indicators 7
2-
SIREMOBIL Compact / L, SIREMOBIL Iso-C, POWERMOBIL,
2Temperature Indicators
ARCOSKOP, ARCADIS Varic and ARCADIS Orbic 0
SIRECON 17-2 HDR-C 0
(31 35 063 G5256) beginning with Ser. No.: 01001
SIRECON 23-2 int. 1K 0
(77 21 710) serial numbers 01001 and higher
SIRECON 23-2 R 0
(88 87 429) serial numbers 01001 and higher
Procedure:
The I.I. models used in these systems have temperature indicators for 37°C and 40°C that
can be read only from the outside and which are in the vicinity of the identification labels.
Read the two temperature indicators and evaluate them per the following description.
Temperature Indicators not Responded:

Both the 37°C and 40°C temperature indicators have not responded.
• Remove both temperature indicators from the I.I. housing and begin startup.

07.09 CSPSSP
8 Temperature Indicators
37°C Temperature Indicator has Responded:

40°C temperature indicator has not responded:
Perform the complete IQ Quick Test for the system and compare the IQ data obtained with
the values determined at the factory. When doing this, pay particular attention to the indi-
rect dose control, capillary test, resolution, minimum contrast and image disturbances (arti-
facts). If no differences are found, remove the two temperature indicators and continue with
startup.
If there are differences to the values that were determined (within the listed tolerances)
prior to replacing the I.I., make sure that there are no other errors in the system (e.g. incor-
rect adjustment of the optical focus, electrical focus...).
If there are no longer any differences after making the repair, remove the two temperature
indicators and continue with startup. Otherwise, replace the I.I.
The 37C and 40C Temperature Indicators have Responded:

Replace the I.I. and perform the required adjustments. See the Service Instructions for the
corresponding system.

07.09 CSPSSP
SIRECON with Compact Housing 2.1
These versions have a bonded housing.
SIRECON 23-3 HDR-D 0
SIRECON 23-2 HDR-DL 0
SIRECON 23-3 HDR-DX 0
(38 31 034 G5370) beginning with Ser. No: 01001
SIRECON 23-3 HDR-DQ 0
SIRECON 23-DQM 0
(88 70 193 G5370) serial numbers 01001 and higher
SIRECON 23 ISX 0
SIRECON 33 MD 0
SIRECON 33 M 0
SIRECON 23-3 HDR-DA 0
1. With this Sirecon, the housing is not a bonded housing, but because of its internal design, the input
screen and the MU metal can be damaged.

07.09 CSPSSP
Procedure:
The I.I. models used in these systems have temperature indicators for 37°C and 40°C that
can be read only from the outside and which are in the vicinity of the identification labels.
Read the two temperature indicators and evaluate them per the following description.
Both Temperature Indicators have not Responded:

Both the 37°C and 40°C temperature indicators have not responded.
Remove both temperature indicators from the I.I. housing and begin startup.
37°C Temperature Indicator has Responded:

40°C temperature indicator has not responded:
Perform the complete IQ Quick Test for the system and compare the IQ data obtained with
the values determined at the factory. When doing this, pay particular attention to the indi-
rect dose control, capillary test, resolution, minimum contrast and image disturbances (arti-
facts). If no differences are found, remove the two temperature indicators and continue with
startup.
If there are differences to the values that were determined (within the listed tolerances)
prior to replacing the I.I., make sure that there are no other errors in the system (e.g. incor-
rect adjustment of the optical focus, electrical focus...).
If there are no longer any differences after making the repair, remove the two temperature
indicators and continue with startup. Otherwise, replace the I.I.
37°C temperature indicator and 40°C temperature indicator have responded:

Replace the I.I. and perform the required adjustments. See the Service Instructions for the
corresponding system.

07.09 CSPSSP
Access to the Indicators 2.2
The following illustrations show the different access paths to the indicators on the OPTILUX
tubes.
SIRECON 17 D-C 0
Remove the I.I. cover.

The indicators are located next to the
identification label (Fig. 2 / p. 11).
Fig. 2:
SIRECON 23 D-C 0

07.09 CSPSSP
Remove the cover panel that goes

around the unit.
The indicators are located next to the
identification label under the mount on
the C-Arm (Fig. 3 / p. 12).
Fig. 3:
SIRECON 17-2 HDR-L 0
SIRECON 17-2 M 0
Remove the aluminum cover in front of

the I.I. input. The indicators are located
on the outside edge of the input screen
(Fig. 4 / p. 12).
Fig. 4:

07.09 CSPSSP
SIRECON 23-3 HDR 0
SIRECON 23-3 HDR-X 0
HDR-X (98 06 506 G5386) beginning with Ser. No.: 01501
SIRECON 23-2 HDLE 0
SIRECON 23-3 HDR-XD 0
SIRECON 23-3 M 0
Remove the cover over the I.I. service

board.
The indicators can be read through the
slot under the board (Fig. 5 / p. 13).
Fig. 5:
SIRECON 27-3 HDR 0

07.09 CSPSSP
The indicators are located behind the

half-round cover, below the light distribu-
tor (Fig. 6 / p. 14).
Fig. 6:
SIRECON 33-4 HDR-WD 0
Fig. 7: HDR-WD temperature indicator

• Take note of the surface of the image intensifier housing (2/Fig. 7 / p. 14).
• Remove the appropriate cover panel.
• Read the temperature indicators as in (1/Fig. 7 / p. 14).
SIRECON 33-4 HDR-WA 0

07.09 CSPSSP
Fig. 8: Location of the 33 HDR-WA temperature indicator Fig. 9: 33 HDR-WA temperature indicator
• Remove the cover and power supply and read the temperature indicators as in
(1/Fig. 8 / p. 15) and (1/Fig. 9 / p. 15).
SIRECON 33 ISX 0
Fig. 10: SIRECON 33 ISX temp. indicator removed Fig. 11: SIRECON 33 ISX temp. indicator
Pos. 1 Location of the temp. indicator Pos. 1 Location of the temperature indicator

07.09 CSPSSP
• The inside indicator can be seen only if the SIRECON is removed from the C-Arm
(AXA3-500.841.01 / Removing the 22 ISX). See AXA3-500.841.01. ... CB-DOC Artis U,
Replacement of Parts.
SIRECON 33-4 HDR/W 0
SIRECON 33-4 HDR/W (Angio) 0
Remove the square cover.

The indicators can be read through the
opening on the connector side of the
power supply (Fig. 12 / p. 16).
Fig. 12:
SIRECON 33-4 HDR 0
SIRECON 33-4 Angio 0
SIRECON 30-2 TH 0

07.09 CSPSSP
The indicators are located behind the

half-round cover, below the light distribu-
tor (Fig. 13 / p. 17).
Fig. 13:
SIRECON 40-4 HDR E 0
SIRECON 40-4 HDR IS 0
SIRECON 40-4 HDR 0
SIRECON 40-4 HDR S 0
SIRECON 40-4 HDR S 0

07.09 CSPSSP
Remove the cover on the power supply in

the I.I. The indicators are located behind
the power supply in the opening of the I.I.
housing (Fig. 14 / p. 18)
Fig. 14:
SIRECON 40-4 HDR-A 0
Fig. 15: Removing the power supply Fig. 16: Temperature indicator
• Remove the cover from the cable shaft.

• Remove the 2 nuts (1/Fig. 15 / p. 18).

07.09 CSPSSP
• Take the power supply off the threaded studs and move it down approx. 2 cm
(2/Fig. 15 / p. 18).
¹ The power supply will now be freely movable
• Lift the power supply until the temperature indicators to the right of the cable become
visible (1/Fig. 16 / p. 18) and read the temperature indicators.

07.09 CSPSSP
20 Changes to Previous Version
3Changes to Previous Version 3-
Chapter Section Changes
Temperature Indicators SIRECON 23-2 int. 1K, 77 21 710 added.
SIRECON 23-2 R, 88 87 429

07.09 CSPSSP

Sirecon: Sirecon Temperature Monitoring With The SIRECON Unit and OPTILUX Tube Units

Uploaded by

Copyright:

Available Formats

Sirecon: Sirecon Temperature Monitoring With The SIRECON Unit and OPTILUX Tube Units

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Sirecon: Sirecon Temperature Monitoring With The SIRECON Unit and OPTILUX Tube Units

Uploaded by

Copyright:

Available Formats

h

Temperature Monitoring with the SIRECON Unit and

Print No.: AX51-030.812.01.04.02 English

SIRECON AX51-030.812.01.04.02 Page 2 of 20 © Siemens, 2001

1 _______ Introduction ____________________________________________________ 5

2 _______ Temperature Indicators ___________________________________________ 7

SIREMOBIL Compact / L, SIREMOBIL Iso-C, POWERMOBIL, ARCOSKOP, ARCADIS

© Siemens, 2001 AX51-030.812.01.04.02 Page 3 of 20 SIRECON

3 _______ Changes to Previous Version _____________________________________ 20

SIRECON AX51-030.812.01.04.02 Page 4 of 20 © Siemens, 2001

testoterm R testoterm R testoterm R testoterm R

NOTE For SIREMOBIL Compact / L, SIREMOBIL ISO-C, POWERMO-

© Siemens, 2001 AX51-030.812.01.04.02 Page 5 of 20 SIRECON

SIRECON AX51-030.812.01.04.02 Page 6 of 20 © Siemens, 2001

ARCOSKOP, ARCADIS Varic and ARCADIS Orbic 0

SIRECON 17-2 HDR-C 0

(31 35 063 G5256) beginning with Ser. No.: 01001

SIRECON 23-2 HDR-C 0

(31 35 071 G5253) beginning with Ser. No.: 01001

SIRECON 23-2 int. 1K 0

(77 21 710) serial numbers 01001 and higher

(88 87 429) serial numbers 01001 and higher

SIRECON 27-2 HDR-C 0

(38 31 703 G5146) beginning with Ser. No.: 01001

Temperature Indicators not Responded:

© Siemens, 2001 AX51-030.812.01.04.02 Page 7 of 20 SIRECON

37°C Temperature Indicator has Responded:

The 37C and 40C Temperature Indicators have Responded:

SIRECON AX51-030.812.01.04.02 Page 8 of 20 © Siemens, 2001

SIRECON with Compact Housing 2.1

These versions have a bonded housing.

SIRECON 23-3 HDR-D 0

(38 29 509 G5370) beginning with Ser. No.: 01001

SIRECON 23-2 HDR-DL 0

(38 31 042 G5370) beginning with Ser. No.: 01001

SIRECON 23-3 HDR-DX 0

(38 31 034 G5370) beginning with Ser. No: 01001

SIRECON 23-3 HDR-DQ 0

(38 31 604 G5370) beginning with Ser. No.: 01001

(88 70 193 G5370) serial numbers 01001 and higher

(77 21 868 G5299) beginning with Ser. No.: 010011

(77 21 819 G5379) serial numbers 01001 and higher

(88 70 201 G5379) serial numbers 01001 and higher

SIRECON 23-3 HDR-DA 0

(38 31 869 G5370) beginning with Ser. No.: 01001

© Siemens, 2001 AX51-030.812.01.04.02 Page 9 of 20 SIRECON

Both Temperature Indicators have not Responded:

37°C Temperature Indicator has Responded:

37°C temperature indicator and 40°C temperature indicator have responded:

SIRECON AX51-030.812.01.04.02 Page 10 of 20 © Siemens, 2001

Access to the Indicators 2.2

(11 23 467 G5345) beginning with Ser. No.: 01333

Remove the I.I. cover.

(11 23 459 G5360) beginning with Ser. No.: 01617

© Siemens, 2001 AX51-030.812.01.04.02 Page 11 of 20 SIRECON

Remove the cover panel that goes

SIRECON 17-2 HDR-L 0

(28 31 712 G5256) beginning with Ser. No.: 01054

(31 36 087 G5256) beginning with Ser. No.: 01012

1 _ Introduction ______________________________________________ 5

2 _ Temperature Indicators _____________________________________ 7

3 _ Changes to Previous Version _______________________________ 20