Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 265 views

    LA Audio - Ms824

    Uploaded by

    WhattheFuck007
    The document summarizes an 8 channel 1:5 active microphone splitter by LA Audio. It has 8 independently buffered output channels to split one microphone input signal without degradation. It provides switchable phantom power, a pad switch for line level signals, and a monitor button to check microphone signals. The unit can be daisy chained and powered by an external power supply for multiple units.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd

    LA Audio - Ms824

    Uploaded by

    WhattheFuck007
    265 views3 pages
    The document summarizes an 8 channel 1:5 active microphone splitter by LA Audio. It has 8 independently buffered output channels to split one microphone input signal without degradation. It provides switchable phantom power, a pad switch for line level signals, and a monitor button to check microphone signals. The unit can be daisy chained and powered by an external power supply for multiple units.

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document summarizes an 8 channel 1:5 active microphone splitter by LA Audio. It has 8 independently buffered output channels to split one microphone input signal without degradation. It provides switchable phantom power, a pad switch for line level signals, and a monitor button to check microphone signals. The unit can be daisy chained and powered by an external power supply for multiple units.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    265 views3 pages

    LA Audio - Ms824

    Uploaded by

    WhattheFuck007
    The document summarizes an 8 channel 1:5 active microphone splitter by LA Audio. It has 8 independently buffered output channels to split one microphone input signal without degradation. It provides switchable phantom power, a pad switch for line level signals, and a monitor button to check microphone signals. The unit can be daisy chained and powered by an external power supply for multiple units.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 3

    8 Channel 1:5 Active Mic Splitter

    PRODUCT OVERVIEW
    The MS824 is an 8 channel 1 into 4 Unity Gain Active Microphone Splitter designed for applications where multiple feeds are required from one set of microphones without the signal degradation experienced with passive splitting solutions. The exceptional dynamic and line driving performance maintain Unity Gain on all feeds. The importance of this cannot be overstated as it allows the last minute hook up of, for instance, and OB van, without any need for recalibration. Each of the MS824's channels has four independently buffered floating outputs allowing problem free connection to other audio systems. A fifth dedicated Link output is provided for the front of house feed. A pad switch allows the channel to handle line levels and switchable Phantom Power is provided with a Phantom Presence LED. The elctronically balanced input may be transformer buffered as an option. A monitor button on each channel momentarily connects the input to the Monitor module (one required for each system) which facilitates both headphone and visual monitoring of input signals via a 10 segment LED bargraph. The headphone circuit features dynamic enhancement and control to ensure that the quitest signals (for instance unused but open mics) can be detected, while also limiting high level signals. The MS824 may also be specified with power failure bypass relays and, to ensure the highest quality signal is maintained during power failure, passive splitter transformers may also be fitted. The front panel of the MS824 gives access to the Input, Link and three of the Output XLRs as well as Phantom, Pad and Monitor switching. All connections can be duplicated on a number of multiway options on the rear panel. For larger installations MS824 units may be daisy chained with one external power supply required for up to eight standard units, or up to four units fitted with power-fail relays. The system allows the connection of a spare PSU.
    BLOCK DIAGRAM

    Phantom

    Pad

    Output 1

    + -

    + Output 2

    Test Test Bus

    Output 3

    + Output 4

    British Originals

    In keeping with our policy of continuous improvement LA Audio reserves the right to alter specifications without prior notice. Manufactured in the UK by LA Audio, 6-24 Southgate Road, London, N1 3JJ. Tel: +44 (0)207 923 7447, FAX: +44 (0)207 241 3644. Web: www.laaudio.co.uk. email: sales@laaudio.co.uk An SCV International Group Company

    SPECIFICATIONS SPECIFICATIONS
    ELECTRICAL ELECTRICAL Temperature Range: Operating: 0C to 50C Storage: -30C to 75C

    Frequency response: 20Hz to 20kHz, +0, -0.5dB 2k Input Impedance: Maximum Input Level: 0dBu (+20dBu with Pad)

    EXTERNAL PSU Power connection: Detachable lead IEC 3 pin socket 483 (19") W 165 (6.5") D 89 (3.5") H 4.8kg, 10.5lbs 5.3kg, 11.5lbs 190VA, 115/230V AC, 50/60Hz

    Output Impedance: Load Impedance: Gain:

    < 2R >150R 0dB (-20dB with Pad)

    Dimensions (mm):

    8 Channel 1:5 Active Mic Splitter

    Equivalent Input Noise:-122dBu < 0.01% THD: 1kHz, 150R load Bargraph Calibration: -60dB to +20dB Headphone Output: Power Requirement: 2 x 0.125W, 8R - 600R 17V bipolar, +48V

    Weight: Shipping Weight: Power Requirement:

    PHYSICAL Input Connector: Output Connector: Interconnection: XLR 3 Pin (Pin 2 hot) XLR 3 Pin (Pin 2 hot) *34 way centronics cable

    *Audio and Regulated Power Dimensions (mm): 483 (19") W 165 (6.5") D 178 (7") H (4U) 11kg, 24lbs 11.5kg, 25.2lbs

    Weight: Shipping Weight:

    ARCHITECTS & ENGINEERS SPECIFICATIONS


    The Microphone Splitter shall be an active Unity Gain design offering 8 channels of 1 into 4 signal splitting. All four main feeds shall be fully floating transformer buffered. A dedicated direct link output shall also be provided. Each channel shall incorporate switchable Phantom Power with a Phantom Presence LED, and a Pad switch shall provide 20dB of attenuation for Line level compatibility. A monitor switch on each channel shall provide direct monitoring of the input signal via the Master Module which shall output both an audio signal via a headphones socket and visual indication via a 10 segment LED bargraph. Access to the Input, Link and three outputs shall be facilitated on front panel XLR connectors and all connections shall be available via multipin connector options on the rear panel of the unit. The Microphone Splitter shall be expandable by daisy chaining and shall be externally powered by PSU's capable of power sharing. As an option, the Microphone Splitter shall have the facility to fit Power Fail bypass relays and Passive Splitter transformers. The Microphone Splitter shall be the LA Audio MS824.

    British Originals

    In keeping with our policy of continuous improvement LA Audio reserves the right to alter specifications without prior notice. Manufactured in the UK by LA Audio, 6-24 Southgate Road, London, N1 3JJ. Tel: +44 (0)207 923 7447, FAX: +44 (0)207 241 3644. Web: www.laaudio.co.uk. email: sales@laaudio.co.uk An SCV International Group Company

    PHANTOM OFF ON OFF

    PHANTOM ON OFF

    PHANTOM ON OFF

    PHANTOM ON OFF

    PHANTOM ON OFF

    PHANTOM ON OFF

    PHANTOM ON OFF

    PHANTOM ON

    MASTER

    48V INPUT INPUT

    48V INPUT

    48V INPUT

    48V INPUT

    48V INPUT

    48V INPUT

    48V INPUT

    48V

    GND

    LIFT

    INPUTS

    FU

    SE

    F 1A

    GND

    LIFT

    LINK

    LINK

    LINK

    LINK

    LINK

    LINK

    LINK

    LINK OUTPUT 1
    GND
    FU

    SE

    F 1A
    LIFT

    OUTPUT 2
    PAD 0 dB - 20 0 dB PAD - 20 0 dB PAD - 20 0 dB PAD - 20 0 dB PAD - 20 0 dB PAD - 20 0 dB PAD - 20 0 dB PAD - 20 GND

    FU

    SE

    F 1A

    LIFT

    LISTEN OUTPUT 1

    LISTEN OUTPUT 1

    LISTEN OUTPUT 1

    LISTEN OUTPUT 1

    LISTEN OUTPUT 1

    LISTEN OUTPUT 1

    LISTEN OUTPUT 1

    LISTEN OUTPUT 3 OUTPUT 1 +20 0dB -20 -40


    FU

    SE

    A U D I O

    OUTPUT 2

    OUTPUT 2

    OUTPUT 2

    OUTPUT 2

    OUTPUT 2

    OUTPUT 2

    OUTPUT 2

    OUTPUT 2
    4

    -60
    6

    8 Channel 1:5 Active Mic Splitter

    10

    VOLUME OUTPUT 3 OUTPUT 3 OUTPUT 3 OUTPUT 3 OUTPUT 3 OUTPUT 3 OUTPUT 3 OUTPUT 3

    PHONES

    483.0

    178.0

    165.0

    British Originals

    In keeping with our policy of continuous improvement LA Audio reserves the right to alter specifications without prior notice. Manufactured in the UK by LA Audio, 6-24 Southgate Road, London, N1 3JJ. Tel: +44 (0)207 923 7447, FAX: +44 (0)207 241 3644. Web: www.laaudio.co.uk. email: sales@laaudio.co.uk An SCV International Group Company

    You might also like