2021

Technical Catalogue
Table of Contents
Conduits
CONDUITS
EMT, IMC, RSC, Elbows and Flexible Conduits ……….. ………. 1

EMT Fittings
EMT FITTINGS
Set-screw & Compression Type ……………………………….…..
…………. 9

Fittings for IMC and RSC FITTINGS FOR IMC

IMC Coupling, L & B, Grounding Bushing,
& RSC
Reducing Bushing, Hub, Clamps, Entrance Caps ……………...
………. 12

Fittings for Flexible Conduits FITTINGS FOR

Liquidtight Straight and Angle Connector FLEXIBLE
BX Straight and Angle Connector ………………………….………
………. 17 CONDUITS
Conduit Bodies ……………………………………….……..………
………. 19 CONDUIT BODIES
Channels and Supports CHANNELS &
Solid and Half-Slot Channels, Supports ……………….………….
………. 26 SUPPORTS

Switch Boxes and Covers SWITCH BOXES &

Octagonal, Utility and Square Boxes,
COVERS
Extension Rings, Covers …………………...……………..………
………. 29

Weatherproof Boxes and Covers WEATHERPROOF

Steel Switch Boxes
BOXES & COVERS
PVC Junction Boxes …………………………………...………….
…………..35

Distribution Boxes DISTRIBUTION

8/12/16/20/24/32 Ways ………………..…………………………….
……………39 BOXES

Metal Cabinets METAL

Powder-coated Metal Enclosure
ENCLOSURES
Stainless Steel Enclosure …………………...…………………………
……… 40

Cable Ducts
CABLE DUCTS
Solid and Slotted …………………………………….....…………………
………. 42

Cable Ties
CABLE TIES
Nylon and SS304 …………………………...…..….………………….
………. 44

Cable Glands ……………………………………...……………….

…………..48 CABLE GLANDS
Aluminum Lugs
LUGS
Compression Lugs, Mechanical Lugs ………………….……………….
………. 51
 ELECTRICAL METALLIC TUBING

Features:
• Electro-galvanized for protection against corrosion
• Precision manufactured from high grade mild steel strip
• Accurate circular cross section with uniform wall thickness
• Listed to Underwriters Laboratories Safety Standard UL 797
• Manufactured in accordance with ANSI C80.3
• UL File No. E481360

Application:
• Unthreaded steel raceway used to protect and route
electrical wiring.

Nominal Outside Ø Nominal Wall

Trade Size Unit Length (C)
(A) Thickness (B) Weight of 10 units (kg)
in. mm in. mm in. mm mm ft.
1/2 16 17.93 0.706 0.042 1.07 3050 10 12.95

3/4 21 23.42 0.922 0.049 1.25 3050 10 19.75

1 27 29.54 1.163 0.057 1.45 3050 10 29.00

1-1/4 35 38.35 1.510 0.065 1.65 3050 10 43.10

1-1/2 41 44.20 1.740 0.065 1.65 3050 10 49.95

2 53 55.80 2.197 0.065 1.65 3050 10 63.55

1
 INTERMEDIATE METAL CONDUIT

Features:
• Hot dip galvanized inside and outside for greater corrosion resistance
• Precision manufactured from high grade mild steel strip
• Threaded on both ends with one coupling on one end, thread
protector on other end
• Accurate circular cross section with uniform wall thickness
• Listed to Underwriters Laboratories Safety Standard UL 1242
• Manufactured in accordance with ANSI C80.6
• UL File No. E479354

Application:
Threaded steel raceway with lighter-weight compared to RSC used
to protect and route electrical wiring installed in dry, wet, exposed, and
concealed locations.

Nominal Outside Ø Nominal Wall Length Without Coupling Weight of 10

Trade Size
(A) Thickness (B) (C) units w/
in. mm in. mm in. mm mm ft. ± ¼ in coupling (kg)

1/2 16 0.815 20.70 0.078 1.97 3030 9 11-1/4 28.12

3/4 21 1.029 26.14 0.083 2.10 3030 9 11-1/4 38.10

1 27 1.290 32.77 0.093 2.35 3025 9 11 53.98

1-1/4 35 1.638 41.59 0.095 2.41 3025 9 11 71.67

1-1/2 41 1.883 47.82 0.100 2.54 3025 9 11 88.00

2 53 2.360 59.93 0.105 2.67 3025 9 11 116.12

2-1/2 63 2.857 72.57 0.150 3.81 3010 9 10-1/2 200.04

3 78 3.476 88.29 0.150 3.81 3010 9 10-1/2 246.30

3-1/2 91 3.971 100.86 0.150 3.81 3005 9 10-1/4 285.31

4 103 4.466 113.40 0.150 3.81 3005 9 10-1/4 317.52

2
 RIGID STEEL CONDUIT

Features:
• Hot dip galvanized inside and outside for greater corrosion resistance
• Precision manufactured and has the thickest wall of all the metallic
raceways to provide the best circuit protection for cables
• Threaded on both ends with one coupling on one end, thread protector
on other end
• Accurate circular cross section with uniform wall thickness
• Listed to Underwriters Laboratories Safety Standard UL 6
• Manufactured in accordance with ANSI C80.1
• UL File No. E485208

Application:
Thick-walled and threaded steel raceway to provide the best protection
in electrical wiring installed in dry, wet, exposed, concealed, and
corrosive locations.

Nominal Outside Ø Nominal Wall Length Without Coupling Weight of 10

Trade Size
(A) Thickness (B) (C) units w/
in. mm in. mm in. mm mm ft. ± ¼ in coupling (kg)
1/2 16 0.840 21.34 0.104 2.64 3030 9 11-1/4 35.80

3/4 21 1.050 26.67 0.107 2.72 3030 9 11-1/4 47.60

1 27 1.315 33.40 0.126 3.20 3025 9 11 69.40

1-1/4 35 1.660 42.16 0.133 3.38 3025 9 11 91.20

1-1/2 41 1.900 48.26 0.138 3.51 3025 9 11 112.90

2 53 2.375 60.33 0.146 3.71 3025 9 11 150.60

2-1/2 63 2.875 73.03 0.193 4.90 3010 9 10-1/2 239.00

3 78 3.500 88.90 0.205 5.21 3010 9 10-1/2 309.60

4 103 4.500 114.30 0.225 5.72 3005 9 10-1/4 441.00

3
 90° ELBOWS

ELECTRICAL METALLIC TUBING (EMT) ELBOWS

Features:
• Electro-galvanized for protection against corrosion
• Precision manufactured from high grade mild steel strip
• Accurate circular cross section with uniform wall thickness
Application:
To connect two ends of EMT that requires 90° bend to
change raceway direction or bypass obstructions.

Trade Size Min. Radius (R) to

Straight Length "T" Offset
Center of Conduit
in. mm (mm) "H" (mm)
(mm)
1/2 16 102 72 174
3/4 21 114 74 188
1 27 146 76 222
1-1/4 35 184 84 268
1-1/2 41 210 92 302
2 53 241 108 349

INTERMEDIATE METAL CONDUIT (IMC) ELBOWS

Features:
• IMC 90° Elbow
• Hot dip galvanized inside and outside for greater corrosion resistance
• Precision manufactured from high grade mild steel strip
• Threaded on both ends
• Accurate circular cross section with uniform wall thickness

Application:
To connect two ends of IMC that requires 90° bend to change
raceway direction or bypass obstructions.
Trade Size Min. Radius (R) to
Straight Length "T" Offset "H"
Center of Conduit
in. mm (mm) (mm)
(mm)
1/2 16 102 72 174
3/4 21 114 74 188
1 27 146 76 222
1-1/4 35 184 84 268
1-1/2 41 210 92 302
2 53 241 108 349
2-1/2 63 267 135 402
3 78 330 156 486
3-1/2 91 381 171 552
4 103 406 181 587
4
 90° ELBOWS

RIGID STEEL CONDUIT (RSC) ELBOWS

Features:
• RSC 90° Elbow
• Hot dip galvanized inside and outside for greater corrosion resistance
• Threaded on both ends
• Accurate circular cross section with uniform wall thickness

Application:
To connect two ends of IMC that requires 90° bend to change
raceway direction or bypass obstructions.

Trade Size Min. Radius (R) to

Straight Length "T" Offset
Center of Conduit
in. mm (mm) "H" (mm)
(mm)
1/2 16 102 72 174
3/4 21 114 74 188
1 27 146 76 222
1-1/4 35 184 84 268
1-1/2 41 210 92 302
2 53 241 108 349
2-1/2 63 267 135 402
3 78 330 156 486
3-1/2 91 381 171 552
4 103 406 181 587

5
 LIQUIDTIGHT FLEXIBLE CONDUIT

ULTRA TUFF, TYPE EF

Features: Application:
• Zinc galvanized steel strip, interlocked Provides mechanical protection for conductors in
• Water-proof, oil resistant • oily and harsh chemical environments
• Temperature rating: -20°C ̴ +80°C • commercial and high-rise buildings
• PVC jacket in grey color • industrial applications
• IP rating: IP65 • machineries / motor controls
• for installation where flexiblity is needed
or where vibration and/or movement is present

Trade Size Inside Diameter Ø Outside Diameter Ø Bending Radius

Length per
pack
in. mm Min (mm) Max (mm) Min (mm) Max (mm) mm

1/2 16 15.80 16.30 20.80 21.30 93 200

3/4 21 20.80 21.30 25.20 26.70 118 200

1 27 26.40 27.00 32.80 33.40 175 200

1-1/4 35 35.00 35.80 41.40 42.20 213 100

1-1/2 41 40.00 40.60 47.40 48.30 239 50

2 53 51.30 51.90 59.30 60.30 293 50

2-1/2 63 63.00 63.63 72.10 73.00 381 20

3 78 78.00 78.70 87.90 88.00 454 20

4 103 101.60 102.60 113.20 114.30 620 20

6
 STEEL FLEXIBLE CONDUIT

Helically wound square-locked flexible metal conduit

Features: Application:
• Zinc galvanized steel strip, Provides mechanical protection for conductors in
square-locked areas requiring flexibility:
• Temperature rating: -10°C ̴ + 60°C • indoor fittings
• underfloor applications (computers/floor boxes)
• machineries / motor controls
• areas subject to heat and sparks

square-locked

Trade Size Inside Diameter Ø Outside Diameter Ø Bending Radius

Length per
pack
in. mm mm mm mm

3/8 12 13.00 16.00 85 50

1/2 16 18.20 21.10 85 50

3/4 21 22.00 25.20 100 50

1 27 28.10 31.50 120 50

1-1/4 35 35.00 39.50 150 10

1-1/2 41 40.50 44.50 180 10

2 53 52.10 59.50 220 10

7
 PVC COATED EXTRA FLEXIBLE METAL CONDUIT

Helically wound square-locked flexible conduit with PVC coating.

Features: Application:
• Zinc galvanized steel strip Provides mechanical protection for conductors in
• Soft type PVC coat for extra flexibility, • commercial buildings
oil-resistant • underfloor applications (computers/floor boxes)
• PVC coat in black color • machineries / motor controls
• UV resistant • elevators, CCTV, and other security equipments
• ideal also in tight-spot location where certain
degree of water-proof installation is required
• indoor and outdoor use

Trade Size Inside Diameter Ø Outside Diameter Ø Bending Radius Length per
pack
in. mm Min (mm) Min (mm) mm

3/8 12 12.50 16.20 85 50

1/2 16 16.10 19.50 85 50

3/4 21 21.00 24.80 100 50

1 27 26.00 30.00 100 50

8
 EMT CONNECTOR
Set Screw Type EMT Connector

Features:
• Concrete tight
• Die-cast zinc
• UL File No. E475295
1/2,3/4,1 1-1/4, 1-1/2, 2

Application:
• To secure and terminate EMT to a box or enclosure in dry locations

Dimensions (in) Standard

Cat. No. Trade Size
A B C Packing
800 1/2" 1.157 0.382 0.933 50pcs/box
801 3/4" 1.378 0.366 1.169 25pcs/box
802 1" 1.504 0.500 1.421 50pcs/box
803 1-1/4" 1.969 1.535 1.823 25pcs/box
804 1-1/2" 2.260 1.768 2.067 25pcs/box
805 2" 2.563 2.228 2.524 20pcs/box

Compression Type EMT Connector

Features:
• Concrete tight
• Die-cast zinc
• UL File No. E475295

Application:
• To secure and terminate EMT to a box or enclosure in dry or damp locations

Dimensions (in) Standard

Cat. No. Trade Size
A B C Packing
820 1/2" 1.256 0.965 0.433 50pcs/box
821 3/4" 1.209 1.264 0.433 25pcs/box
822 1" 1.575 1.516 0.547 15pcs/box
823 1-1/4" 1.618 1.906 0.575 10pcs/box
824 1-1/2" 1.874 2.276 0.622 10pcs/box
825 2" 2.146 2.610 0.756 10pcs/box

9
 EMT COUPLING
Set Screw Type EMT Coupling

Features:
• Concrete tight
• Die-cast zinc
• Threadless
• UL File No. E475295

Application:
• To join lengths of EMT in dry locations or concretetight applications

Dimensions (in) Standard

Cat. No. Trade Size
A B Packing
810 1/2" 1.488 0.905 50pcs/box
811 3/4" 1.944 1.177 25pcs/box
812 1" 2.275 1.413 50pcs/box
813 1-1/4" 2.618 1.822 25pcs/box
814 1-1/2" 2.909 2.039 25pcs/box
815 2" 3.476 2.515 25pcs/box

Compression Type EMT Coupling

Features:
• Concrete tight
• Die-cast zinc
• UL File No. E475295

Application:
• To join lengths of EMT in dry or damp locations

Dimensions (in) Standard

Cat. No. Trade Size
A B Packing
830 1/2" 1.531 0.965 50pcs/box
831 3/4" 1.579 1.264 25pcs/box
832 1" 1.870 1.516 15pcs/box
833 1-1/4" 2.248 1.906 5pcs/box
834 1-1/2" 3.181 2.276 10pcs/box
835 2" 2.437 2.610 10pcs/box

10
 ETF COUPLING
EMT to Flexible Conduit Coupling

Material: Die-cast zinc

Application: To connect EMT to flexible metal conduit or armoured cable

Cat. No. Trade Size Dimensions (in) Standard

A B Packing
ETFC050 1/2" 1.646 1.417 25pcs/box
ETFC075 3/4" 1.972 1.547 25pcs/box

11
 FITTINGS FOR IMC & RSC
Conduit Locknut

Material: Die-cast zinc

Application: To secure threaded conduit or connector to
a box or an enclosure
UL File No. E475294

Dimensions (in) Standard

Cat. No. Trade Size
A B Packing
LN050 1/2" 1.087 0.122 200pcs/box
LN075 3/4" 1.358 0.142 100pcs/box
LN100 1" 1.661 0.157 100pcs/box
LN125 1-1/4" 2.047 0.157 50pcs/box
LN150 1-1/2" 2.366 0.181 50pcs/box
LN200 2" 2.929 0.187 50pcs/box
LN250 2-1/2" 3.449 0.248 25pcs/box
LN300 3" 4.189 0.232 25pcs/box
LN350 3-1/2" 4.646 0.283 10pcs/box
LN400 4" 5.146 0.240 10pcs/box

Conduit Bushing

Material: Die-cast zinc

Application: Used with a conduit locknut to terminate
threaded RSC or IMC to a box or an enclosure
UL File No. E475294

Dimensions (in) Standard

Cat. No. Trade Size
A B Packing
BU050 1/2" 1.059 0.409 100pcs/box
BU075 3/4" 1.276 0.409 100pcs/box
BU100 1" 1.535 0.496 50pcs/box
BU125 1-1/4" 1.888 0.539 25pcs/box
BU150 1-1/2" 2.122 0.618 25pcs/box
BU200 2" 2.636 0.512 25pcs/box
BU250 2-1/2" 3.228 0.622 10pcs/box
BU300 3" 3.823 0.827 10pcs/box
BU350 3-1/2" 4.359 0.846 10pcs/box
BU400 4" 4.945 0.846 10pcs/box

12
 FITTINGS FOR IMC & RSC
Insulated Grounding Bushing

Features:
• Die-cast zinc bushing
• Polypropylene liner is rated at 105°C
• Dual-rated aluminum lay-in lug for copper or
aluminum conductors
• Clamping and set-screw are made of steel

Application:
To provide a compact means of grounding counduit through an insulated bushing.
The insulation protects conductors from abrasion during pulling and mechanical vibration.

Grounding Lug Wire Dimensions (in) Standard

Cat. No. Trade Size
Min. Max. A B Packing
MGGB-050 1/2" 14 AWG 4 AWG 1.81 0.54 50pcs/box
MGGB-075 3/4" 14 AWG 4 AWG 2.04 0.53 50pcs/box
MGGB-100 1" 14 AWG 4 AWG 2.28 0.63 25pcs/box
MGGB-125 1-1/4" 14 AWG 4 AWG 2.64 0.65 25pcs/box
MGGB-150 1-1/2" 14 AWG 1/0 AWG 2.90 0.69 25pcs/box
MGGB-200 2" 14 AWG 1/0 AWG 3.37 0.93 10pcs/box

IMC Coupling

Material: Steel
Application: To connect threaded IMC or RSC in dry or
damp locations

Dimensions (in) Standard

Cat. No. Trade Size
A B Packing
IMCC-050 1/2" 1.625 1.010 300pcs/box
IMCC-075 3/4" 1.640 1.250 200pcs/box
IMCC-100 1" 1.968 1.530 150pcs/box
IMCC-125 1-1/4" 2.031 1.870 50pcs/box
IMCC-150 1-1/2" 2.062 2.160 25pcs/box
IMCC-200 2" 2.125 2.650 25pcs/box
IMCC-250 2-1/2" 3.187 3.250 10pcs/box
IMCC-300 3" 3.312 3.870 2pcs/box
IMCC-350 3-1/2" 3.406 4.500 10pcs/box
IMCC-400 4" 3.515 4.880 10pcs/box

13
 FITTINGS FOR IMC & RSC

Three-Piece Coupling

Material: Malleable iron

Application: To connect threaded RSC or IMC and conduit elbow,
where neither can be rotated or turned.

Dimensions (in) Standard

Cat. No. Trade Size
A B C Packing
MI3PC050 1/2" 1.38 1.36 1.36 180pcs/box
MI3PC075 3/4" 1.63 1.58 1.58 150pcs/box
MI3PC100 1" 1.81 1.89 1.89 100pcs/box
MI3PC125 1-1/4" 2.19 2.38 2.38 50pcs/box
MI3PC150 1-1/2" 2.31 2.83 2.83 30pcs/box
MI3PC200 2" 2.44 3.29 3.29 25pcs/box

Reducing Bushing

Material: Die-cast zinc

Application: To reduce the trade size of a tapped hole or hub

Dimensions (in) Standard

Cat. No. Trade Size
A B Packing
85801 3/4" - 1/2" 0.625 1.011 500pcs/box
85802 1" - 1/2" 0.712 1.271 250pcs/box
85803 1" - 3/4" 0.712 1.271 250pcs/box

Watertight Hub

Material: Die-cast zinc

Appication: To terminate a run of threaded conduit to a box or
enclosure in damp or wet locations.

Dimensions (in) Standard

Cat. No. Trade Size
A B Packing
WTH050 1/2" 1.406 1.406 25pcs/box
WTH075 3/4" 1.539 1.661 10pcs/box
WTH100 1" 1.752 1.949 10pcs/box
WTH125 1-1/4" 1.689 2.409 2pcs/box
WTH150 1-1/2" 1.713 2.693 2pcs/box
WTH200 2" 1.831 3.201 2pcs/box

14
 FITTINGS FOR IMC & RSC

One-Hole Clamp

Material: Rigid steel

Application: To mount and support a conduit to any surface.

Dimensions (in) Standard

Cat. No. Trade Size
A B C Packing
CCRS050 1/2" 1.949 0.634 0.933 100pcs/box
CCRS075 3/4" 2.213 0.732 1.102 100pcs/box
CCRS100 1" 2.657 0.878 1.264 50pcs/box
CCRS125 1-1/4" 3.031 0.866 1.626 50pcs/box
CCRS150 1-1/2" 3.681 1.008 1.953 25pcs/box
CCRS200 2" 4.141 1.189 2.248 25pcs/box

Two-Hole Clamp

Material: Rigid steel

Application: To mount RSC or IMC to any surface where higher
load bearing supports are desired.

Dimensions (in) Standard

Cat. No. Trade Size
A B C Packing
2CCRS-050 1/2" 2.551 0.504 0.874 50pcs/box
2CCRS-075 3/4" 2.898 0.567 1.118 50pcs/box
2CCRS-100 1" 3.453 0.638 1.331 50pcs/box
2CCRS-125 1-1/4" 4.268 0.866 1.673 50pcs/box
2CCRS-150 1-1/2" 4.760 0.941 1.984 25pcs/box
2CCRS-200 2" 5.079 1.000 2.295 25pcs/box
2CCRS-250 2-1/2" 6.106 1.004 2.969 25pcs/box
2CCRS-300 3" 6.772 1.004 3.539 25pcs/box
2CCRS-400 4" 9.366 1.016 4.508 25pcs/box

15
 FITTINGS FOR IMC & RSC

Service Entrance Cap - Threaded Type

Material: Die-cast Aluminum

Application: Used in overhead service entrance to connect
cables to a box or an enclosure.
Mounts on top of RSC or IMC

Dimensions (in) Standard

Cat. No. Trade Size
A B C Packing
SEC-050 1/2" 2.945 2.346 1.996 30pcs/box
SEC-075 3/4" 3.395 2.504 2.244 20pcs/box
SEC-100 1" 3.855 2.972 2.523 10pcs/box
SEC-125 1-1/4" 4.430 3.358 2.968 8pcs/box
SEC-150 1-1/2" 5.620 3.972 3.456 4pcs/box
SEC-200 2" 7.118 5.106 4.543 2pcs/box
SEC-250 2-1/2" 10.633 7.142 6.141 1pc/box
SEC-300 3" 10.720 7.181 6.188 1pc/box
SEC-400 4" 13.890 8.850 7.893 1pc/box

Service Entrance Cap - Clamp Type

Material: Die-cast Aluminum

Application: Used in overhead service entrance to connect
cables to a box or an enclosure.
Mounts on top of RSC or IMC

Dimensions (in) Standard

Cat. No. Trade Size
A B C Packing
SECC-050 1/2" 3.362 2.543 1.996 30pcs/box
SECC-075 3/4" 3.746 2.890 2.244 20pcs/box
SECC-100 1" 4.180 3.346 2.523 10pcs/box
SECC-125 1-1/4" 4.772 3.634 2.968 8pcs/box
SECC-150 1-1/2" 5.938 4.496 3.456 4pcs/box
SECC-200 2" 7.811 5.807 4.543 2pcs/box

16
 FITTINGS FOR FLEXIBLE CONDUITS

Liquidtight Straight Connector

Material: Die-cast Zinc

Application: To terminate and seal liquidtight flexible metal
conduit to an oiltight,
liquidtight or weatherproof box or enclosure
UL File No. E475294

Dimensions (in) Standard

Cat. No. Trade Size
A B C Packing
LTST050 1/2" 1.444 1.307 0.551 20pcs/box
LTST075 3/4" 1.448 1.583 0.551 10pcs/box
LTST100 1" 1.810 1.780 0.716 5pcs/box
LTST125 1-1/4" 2.031 1.909 0.716 5pcs/box
LTST150 1-1/2" 1.991 2.488 0.716 2pcs/box
LTST200 2" 2.007 2.992 0.684 2pcs/box
LTST250 2-1/2" 3.279 3.709 0.984 1pcs/box
LTST300 3" 3.440 4.331 1.011 1pcs/box
LTST400 4" 3.984 5.173 1.035 1pcs/box

90° Liquidtight Angle Connector

Material: Die-cast Zinc

Application: To terminate and seal liquidtight flexible metal conduit
to an oiltight, liquidtight or weatherproof box
or enclosure.

UL File No. E475294

Cat. No. Trade Size Dimensions (in) Standard

A B C Packing
LT90050 1/2" 2.433 2.153 0.511 10pcs/box
LT90075 3/4" 2.717 2.519 0.563 10pcs/box
LT90100 1" 3.425 2.885 0.720 5pcs/box
LT90125 1-1/4" 3.976 3.220 0.838 10pcs/box
LT90150 1-1/2" 4.122 3.700 0.708 10pcs/box
LT90200 2" 4.701 4.184 0.680 5pcs/box
LT90250 2-1/2" 6.189 5.149 1.043 1pcs/box
LT90300 3" 7.087 6.133 0.964 1pcs/box
LT90400 4" 8.531 7.405 1.027 1pcs/box

17
 FITTINGS FOR FLEXIBLE CONDUITS

BX Straight Connector

Material: Die-cast Zinc

Application: To terminate flexible metal conduit to box or an
enclosure in a dry location.

Dimensions (in) Standard

Cat. No. Trade Size
A B C Packing
BXS038 3/8" 1.146 0.512 1.141 50pcs/box
BXS050 1/2" 1.437 0.492 1.370 25pcs/box
BXS075 3/4" 1.575 0.476 1.574 25pcs/box
BXS100 1" 1.760 0.571 1.866 10pcs/box
BXS125 1-1/4" 1.874 0.587 2.145 10pcs/box
BXS150 1-1/2" 2.008 0.610 2.519 5pcs/box
BXS200 2" 2.087 0.606 3.011 10pcs/box

BX Angle Connector

Material: Die-cast Zinc

Application: To terminate flexible metal conduit
to box or an enclosure in a dry location.

Dimensions (in) Standard

Cat. No. Trade Size
A B (min) B (max) C Packing
BXA050 1/2" 2.122 0.640 1.030 0.350 25pcs/box
BXA075 3/4" 2.346 0.760 1.150 0.440 10pcs/box
BXA100 1" 2.768 1.090 1.730 0.543 5pcs/box
BXA125 1-1/4" 3.890 1.340 1.970 0.594 10pcs/box
BXA150 1-1/2" 6.008 1.650 2.610 0.689 5pcs/box
BXA200 2" 6.008 1.540 2.540 0.701 5pcs/box

EMT to Flexible Conduit Coupling

Material: Die-cast zinc

Application: To connect EMT to flexible metal conduit or
armoured cable

Dimensions (in) Standard

Cat. No. Trade Size
A B Packing
ETFC050 1/2" 1.646 1.417 25pcs/box
ETFC075 3/4" 1.972 1.547 25pcs/box

18
 CONDUIT BODIES
Conduit Body - Type LB
Features:
• Copper-free die-cast aluminum
• Threaded, supplied with steel cover and gasket
• UL File No. E476800

Application:
• To join EMT, RSC, or IMC and provide access to the interior of the
raceway for wire pulling, inspection, maintenance, or splicing.

Trade Dimensions (in) Standard

Cat. No.
Size A B C Pkg
LB-50SC 1/2" 1.339 4.311 2.323 50
LB-75SC 3/4" 1.563 5.083 2.559 50
LB-100SC 1" 1.819 5.919 3.012 25
LB-125SC 1-1/4" 2.508 7.819 3.760 10
LB-150SC 1-1/2" 2.508 7.819 3.760 10
LB-200SC 2" 3.189 10.051 4.744 10
LB-250SC 2-1/2" 4.488 12.835 5.630 1
LB-300SC 3" 4.488 12.835 6.220 1
LB-350SC 3-1/2" 5.551 15.650 7.402 1
LB-400SC 4" 5.551 15.650 7.402 1

Conduit Body - Type LR

Features:
• Copper-free die-cast aluminum
• Threaded, supplied with steel cover and gasket
• UL File No. E476800

Application:
• To join EMT, RSC, or IMC and provide access to the interior of the
raceway for wire pulling, inspection, maintenance, or splicing.

Trade Dimensions (in) Standard

Cat. No.
Size A B C Pkg
LR-50SC 1/2" 2.028 4.311 1.594 50
LR-75SC 3/4" 2.303 5.083 1.862 50
LR-100SC 1" 2.681 5.919 2.126 25
LR-125SC 1-1/4" 3.520 7.819 2.736 10
LR-150SC 1-1/2" 3.520 7.819 2.736 10
LR-200SC 2" 4.272 10.051 3.642 10
LR-250SC 2-1/2" 5.874 12.657 4.114 6
LR-300SC 3" 5.894 12.657 4.638 6
LR-350SC 3-1/2" 7.689 15.661 5.780 2
LR-400SC 4" 7.689 15.661 5.780 2
19
 CONDUIT BODIES

Conduit Body - Type C

Features:
• Copper-free die-cast aluminum
• Threaded, supplied with steel cover and gasket
• UL File No. E476800

Application:
• To join EMT, RSC, or IMC and provide access to the interior of the
raceway for wire pulling, inspection, maintenance, or splicing.

Trade Dimensions (in) Standard

Cat. No.
Size A B C Pkg
C-50SC 1/2" 1.339 4.724 1.594 50
C-75SC 3/4" 1.563 5.512 1.862 50
C-100SC 1" 1.819 6.457 2.126 25
C-125SC 1-1/4" 2.508 8.346 2.736 10
C-150SC 1-1/2" 2.508 8.346 2.736 10
C-200SC 2" 3.159 10.236 3.654 10

Conduit Body - Type LL

Features:
• Copper-free die-cast aluminum
• Threaded, supplied with steel cover and gasket
• UL File No. E476800

Application:
• To join EMT, RSC, or IMC and provide access to the interior of the raceway for
wire pulling, inspection, maintenance, or splicing.

Trade Dimensions (in) Standard

Cat. No.
Size A B C Pkg
LL-50SC 1/2" 2.028 4.311 1.594 50
LL-75SC 3/4" 2.303 5.083 1.862 50
LL-100SC 1" 2.681 5.921 2.126 25
LL-125SC 1-1/4" 3.520 7.819 2.736 10
LL-150SC 1-1/2" 3.520 7.819 2.736 10
LL-200SC 2" 4.272 10.051 3.642 10

20
 CONDUIT BODIES

Conduit Body - Type T

Features:
• Copper-free die-cast aluminum
• Threaded, supplied with steel cover and gasket
• UL File No. E476800

Application:
• To join EMT, RSC, or IMC and provide access to the interior of the
raceway for wire pulling, inspection, maintenance, or splicing.

Trade Dimensions (in) Standard

Cat. No.
Size A B C Pkg
T-50SC 1/2" 2.028 4.724 1.594 50
T-75SC 3/4" 2.303 5.512 1.862 50
T-100SC 1" 2.681 6.457 2.126 25
T-125SC 1-1/4" 3.520 8.346 2.736 10
T-150SC 1-1/2" 3.520 8.346 2.736 10
T-200SC 2" 4.099 10.236 3.654 10

21
 Malleable Iron CONDUIT BODIES

Conduit Body - Type C

For use with Rigid Steel, Rigid Aluminum and IMC Conduit

Applications:
• To provide opening to conductors for pulling, splicing, maintenance, and for future changes.
• Make bends in conduit system.
• Allow connections for branch runs.

Features:
• Rounded integral bushings protect conductor insulation
• Tapered threads for tight, rigid joints and ground continuity
• Flat back design provides greater cubic capacity for easier wire pulling, and room for splicing
• Clip cover design allows easy removal without damaging the conduit body
• Pan-head cover screws secure cover clips and provide superior screwdriver seating and torque

Materials:
Body: Malleable Iron
Cover: Steel

Standard Finishes:
Body: triplecoat - zinc electroplate, chromate, epoxy powder coat
Cover: zinc electroplate

NEC Certifications:
- UL Standard: 514A
- UL Listed: E476800

Dimensions (in) Standard

Cat. No. Trade Size
A B C Pkg
MGM-C50SC 1/2" 1.417 5.512 1.417 5
MGM-C75SC 3/4" 1.654 6.142 1.771 5
MGM-C100SC 1" 1.811 7.008 1.889 5
MGM-C125SC 1-1/4" 2.250 7.598 2.440 2
MGM-C150SC 1-1/2" 2.519 8.189 2.677 2
MGM-C200SC 2" 3.071 9.252 3.346 2

22
 Malleable Iron CONDUIT BODIES

Conduit Body - Type LB

For use with Rigid Steel, Rigid Aluminum and IMC Conduit

Applications:
• To provide opening to conductors for pulling, splicing, maintenance, and for future changes.
• Make bends in conduit system.
• Allow connections for branch runs.

Features:
• Rounded integral bushings protect conductor insulation
• Tapered threads for tight, rigid joints and ground continuity
• Flat back design provides greater cubic capacity for easier wire pulling, and room for splicing
• Clip cover design allows easy removal without damaging the conduit body
• Pan-head cover screws secure cover clips and provide superior screwdriver seating and torque

Materials:
Body: Malleable Iron
Cover: Steel

Standard Finishes:
Body: triplecoat - zinc electroplate, chromate, epoxy powder coat
Cover: zinc electroplate

NEC Certifications:
- UL Standard: 514A
- UL Listed: E476800

Dimensions (in) Standard

Cat. No. Trade Size
A B C Pkg
MGM-LB50SC 1/2" 1.338 4.488 2.205 5
MGM-LB75SC 3/4" 1.520 5.098 2.480 5
MGM-LB100SC 1" 1.811 6.043 2.815 5
MGM-LB125SC 1-1/4" 2.204 6.555 3.406 2
MGM-LB150SC 1-1/2" 2.677 7.146 3.642 2
MGM-LB200SC 2" 3.07 8.138 4.37 2
MGM-LB250SC 2-1/2" 3.976 10.52 5.157 1
MGM-LB300SC 3" 4.33 10.61 6.043 1

23
 Malleable Iron CONDUIT BODIES

Conduit Body - Type LR

For use with Rigid Steel, Rigid Aluminum and IMC Conduit

Applications:
• To provide opening to conductors for pulling, splicing, maintenance, and for future changes.
• Make bends in conduit system.
• Allow connections for branch runs.

Features:
• Rounded integral bushings protect conductor insulation
• Tapered threads for tight, rigid joints and ground continuity
• Flat back design provides greater cubic capacity for easier wire pulling, and room for splicing
• Clip cover design allows easy removal without damaging the conduit body
• Pan-head cover screws secure cover clips and provide superior screwdriver seating and torque

Materials:
Body: Malleable Iron
Cover: Steel

Standard Finishes:
Body: triplecoat - zinc electroplate, chromate, epoxy powder coat
Cover: zinc electroplate

NEC Certifications:
- UL Standard: 514A
- UL Listed: E476800

Dimensions (in) Standard

Cat. No. Trade Size
A B C Pkg
MGM-LR50SC 1/2" 1.338 4.488 2.205 5
MGM-LR75SC 3/4" 1.520 5.098 2.480 5
MGM-LR100SC 1" 1.811 6.043 2.815 5
MGM-LR125SC 1-1/4" 2.204 6.555 3.406 2
MGM-LR150SC 1-1/2" 2.677 7.146 3.642 2
MGM-LR200SC 2" 3.07 8.138 4.37 2

24
 Malleable Iron CONDUIT BODIES
Conduit Body - Type T
For use with Rigid Steel, Rigid Aluminum and IMC Conduit

Applications:
• To provide opening to conductors for pulling, splicing, maintenance, and for future changes.
• Make bends in conduit system.
• Allow connections for branch runs.

Features:
• Rounded integral bushings protect conductor insulation
• Tapered threads for tight, rigid joints and ground continuity
• Flat back design provides greater cubic capacity for easier wire pulling, and room for splicing
• Clip cover design allows easy removal without damaging the conduit body
• Pan-head cover screws secure cover clips and provide superior screwdriver seating and torque

Materials:
Body: Malleable Iron
Cover: Steel

Standard Finishes:
Body: triplecoat - zinc electroplate, chromate, epoxy powder coat
Cover: zinc electroplate

NEC Certifications:
- UL Standard: 514A
- UL Listed: E476800

Dimensions (in) Standard

Cat. No. Trade Size
A B C Pkg
MGM-T50SC 1/2" 2.409 5.512 1.889 5
MGM-T75SC 3/4" 2.677 6.142 2.204 5
MGM-T100SC 1" 2.941 7.087 2.283 2
MGM-T-125SC 1-1/4" 3.209 7.598 2.440 2
MGM-T150SC 1-1/2" 3.504 8.190 2.598 2
MGM-T200SC 2" 4.094 9.252 3.228 2

25
 CHANNELS
Half Slot

Material: Steel
Application: Designed for structural applications, strut channels are typically used for the ducts,
suspension of pipes, conduits, and equipment.
They can be interconnected and secured using strut nuts.

Slot Spacing Standard

Cat. No. Dimension (in) Slot Size (in) Finish Length (ft)
on Centers (in) Packing
Gauge 14 (1.98mm)
HSC-HG4141 1-5/8 x 1-5/8 13/25 x 1-3/25 2 HDG 10 50pcs/bundle
HSC-HG4121 1-5/8 x 13/16 13/25 x 1-3/25 2 HDG 10 100pcs/bundle
HSC-PG4141 1-5/8 x 1-5/8 13/25 x 1-3/25 2 Pre-Galv. 10 50pcs/bundle
HSC-PG4121 1-5/8 x 13/16 13/25 x 1-3/25 2 Pre-Galv. 10 100pcs/bundle
Gauge 16 (1.58mm)
HSC-PG4141-16 1-5/8 x 1-5/8 13/25 x 1-3/25 2 Pre-Galv. 10 5 pcs/bundle
HSC-PG4121-16 1-5/8 x 13/16 13/25 x 1-3/25 2 Pre-Galv. 10 100pcs/bundle

Solid

Material: Steel
Application: Designed for structural applications, strut channels are typically used for the
suspension of pipes, conduits, ducts, and equipment.
They can be interconnected and secured using strut nuts.
Cat. No. Dimension (in) Finish Length (ft) Standard Packing
Gauge 14 (1.98mm)
SC-HG4141 1-5/8 x 1-5/8 HDG 10 50 pcs./ bundle
SC-HG4121 1-5/8 x 13/16 HDG 10 100 pcs./ bundle
SC-PG4141 1-5/8 x 13/16 Pre-Galv. 10 50 pcs./ bundle
SC-PG4121 1-5/8 x 13/16 Pre-Galv. 10 100 pcs./ bundle
Gauge 16 (1.58mm)
SC-PG4141-16 1-5/8 x 1-5/8 Pre-Galv. 10 50 pcs./ bundle
SC-PG4121-16 1-5/8 x 13/16 Pre-Galv. 10 100 pcs./ bundle
26
 CHANNEL SUPPORTS
Conduit Hanger

Material: Zinc coated steel

Application: To suspend and hold conduit from
overhead supports.

Dimensions (in)
Cat. No. Size Standard Pkg
A B C D
62501 1/2" 1.87 0.756 0.795 0.25 500
62502 3/4" 2.303 0.882 0.965 0.25 50
62503 1" 2.437 0.874 0.937 0.25 50
62504 1-1/4" 2.929 0.882 1.102 0.25 50
62505 1-1/2" 3.331 0.969 1.161 0.25 50
62506 2" 4.181 1.185 1.398 0.3125 25

Strut Clamp

Material: Zinc coated steel

Application: To mount EMT or rigid conduits from
strut channel.

Dimensions (in)
Cat. No. Size Thickness Standard Pkg
A B
62901 1/2" 1.257 2.204 ga. 14 (1.98mm) 250
62902 3/4" 1.257 2.461 ga. 14 (1.98mm) 250
62903 1" 1.257 2.764 ga. 14 (1.98mm) 250
62904 1-1/4" 1.257 3.315 ga. 14 (1.98mm) 200
62905 1-1/2" 1.257 3.417 ga. 12 (2.77mm) 200
62906 2" 1.257 4.063 ga. 12 (2.77mm) 200
62907 2-1/2" 1.257 4.504 ga. 12 (2.77mm) 50
62908 3" 1.257 5.035 ga. 12 (2.77mm) 25
62909 3-1/2" 1.257 ga. 12 (2.77mm) 25
62910 4" 1.257 6.634 ga. 12 (2.77mm) 25

27
 CHANNEL SUPPORTS
Clamping Nut

Material: Electro-galvanized steel

Application: Use to attach fittings to the open face of channels

Cat. No. Size Length Width Height Standard Pkg

CN-3/8 3/8 34.5 mm 19 mm 9.2 mm 200pcs/box

CN-1/2 1/2 34.5 mm 19 mm 9.2 mm 200pcs/box

Beam Clamp

Material: Electro-galvanized steel (Gold Galv)

Application: To suspend or secure fixtures, wires, threaded rod,
electrical boxes and various hardware to beam flanges.

Flange
Cat. No. Rod Size Hole Size Torque Design Load Standard Pkg
Thickness
BCEG-3/8 3/8 3/8 3/8" max 11 in lb 770 lbs (350kg) 100pcs/box
BCEG-1/2 1/2 1/2 1/2" max 18 in-lbs 770 lbs (350kg) 100pcs/box

Hanger Rod

Material: Electro-galvanized steel

Application: To suspend metal framing channel from the ceiling.

Max. Load (343°C)

Cat. No. Size Length (ft.) Standard Pkg
Lbs Kg
HREG-1/4 1/4" 10 240 109 50pcs/bundle
HREG-3/8 3/8" 10 600 270 20pcs/bundle
HREG-1/2 1/2" 10 1100 500 15pcs/bundle

28
 METALLIC BOXES
Utility Box

Features: Application:
• Pre-galvanized steel • Used for convenience outlets, switch
• 4" x 2" x 2-1/8" boxes or small junction boxes
• With grounding provision (MGUB-1/2)
• Ga. 16
• UL File No. 476800

MGUB-1/2

MGUB-3/4

Knockout
Cat. No. Thickness Volume Standard Pkg
Side End Bottom
MGUB-1/2 3 - ½” 1 – ½” 2 - ½” 1.6mm 17 cu in 1

MGUB-3/4 2 - 3/4" 1 - 3/4" 2 - 3/4" 1.6mm 17 cu in 1

29
 METALLIC BOXES

Utility Box Extension Ring

Features: Applications:
• Pre-galvanized steel • To provide a means for adding cubic capacity or
• 4" x 2" x 1-7/8" as an outlet box for surface conduits.
• Ga. 16
• UL File No. 476800

Cat. No. Side Knockout Description Thickness Standard Pkg

with ear
MGERUB-1/2 8 - 1/2"
screws 1.6mm 1
with ear
MGERUB-3/4 6 - 3/4"
screws 1.6mm 1

Utility Box Cover

Features:
• Pre-galvanized steel
• 4" x 2"
• 1.0mm thickness
Application:
• To close a utility box.

Cat. No. Description Unit Pkg Standard Pkg

MGUCV Blank cover, supplied with screws 50 200

30
 METALLIC BOXES
Octagonal Box

Features: Application:
• Pre-galvanized steel • Used in the installation of ceiling or wall lighting
• 4" x 4" x 2-1/8" fixtures or as a junction box.
• Ga. 16
• With grounding provision
• UL File No. 476800

Knockout
Cat. No. Thickness Volume Standard Pkg
Side Bottom
MGOB-1/2 4 – ½” 4 – ½” 1.6mm 34 cu in 1
MGOB-1/2-3/4 4 concentric KOs, 1/2" or 3/4" (2) ½”; (2) ¾” 1.6mm 34 cu in
1

Octagonal Box Extension Ring

Features:
• Pre-galvanized steel
• 4" x 4" x 1-1/2"
• Ga. 16
• UL File No. 476800

Application:
• Used when extra cubic inch capacity is needed for additional wiring

Cat. No. Side Knockout Thickness Standard Pkg

MGEROB-1/2-3/4 2x1/2" & 2x3/4" 1.6mm 1

Octagonal Box Cover

Features:
• Pre-galvanized steel
• 4" x 4"
• 1.0mm thickness
Application:
• To close an octagonal box.
Cat. No. Description Unit Pkg Standard Pkg
MGOCV Blank Cover, 1/2" KO 50 200
31
 METALLIC BOXES
4" Square Box
4-11/16" Square Box

Features: Application:
• Pre-galvanized steel • Installed in ceilings or walls for lighting fixtures,
• With grounding provision switches or receptacles.
• Ga. 16
• UL File No. 476800

MGSB-1/2-3/4

MGSB1116-1/2-3/4

Knockout Thickness Volume Standard Pkg

Cat. No. Dimension
Side Bottom
8-concentric
4" x 4" x 2-
MGSB-1/2-3/4 KOs, 1/2" or (2) ½”; (2) ¾” 1.6mm 34 cu in 1
1/8" 3/4"

8-concentric (2) ½”; (2)

MGSB1116-1/2- 4-11/16" x 4-
KOs, 1/2" or concentric, 1.6mm 34 cu in 1
3/4 11/16" x 2-1/8"
3/4" 1/2" or 3/4"

32
 METALLIC BOXES

Square Box Extension Rings

Features: Application:
• Pre-galvanized steel • Used when extra cubic inch capacity is needed for
• 4" x 4" x 2-1/8" additional wiring
• 4-11/16" x 4-11/16" x 2-1/2"
• Ga. 16
• UL File No. 476800

MGERSB-1/2-3/4 MGERSB1116-1/2-3/4

Cat. No. Dimension Side Knockout Thickness Standard Pkg

MGERSB-1/2-3/4 4"x4"x2-1/8" 8x1/2" & 4x3/4" side K.O.s 1.6mm 1
MGERSB1116-1/2-
4-11/16"x4-11/16"x2-1/2" 8x1/2" & 4x3/4" side K.O.s 1.6mm 1
3/4

*Square box extension rings are not UL listed.

Square Box Covers

Features:
• Pre-galvanized steel
• 1.0mm thickness

Application: 4" x 4" 4-11/16"

• Used to close a 4" or 4-11/16" square boxes.

Cat. No. Description Unit Pkg Standard Pkg

MGSCV 4" Flat Blank Cover, 1/2" KO 50 200
MGS1116CV 4-11/16" Flat Blank Cover 50 200

33
 METALLIC BOXES

Square Box Raised Covers

Features:
• Pre-galvanized steel
• 1.6mm thickness

Application:
• Used with 4" or 4-11/16" square boxes to 4" x 4"
mount switches, receptacles and devices.

4-11/16" x 4-11/16"

Cat. No. Description Thickness Unit Pkg Standard Pkg

MGRC44-1/2 4" square x 1/2" raised for single device 1.6mm 50 200

MGRC41116-1/2 4-11/16" square x 1/2" raised for 2 device 1.6mm 50 200

3" Square Box

Features:
• Pre-galvanized steel, with bronze terminal
• 72mm x 72mm x 47mm
`• with grounding provision

Application:
• Installed in walls for switches or receptacles.

Knockout
Cat. No. Thickness Volume Standard Pkg
Side Bottom
MG3X3 4x1/2"; 4x3/4" 2x1/2"; 1x3/4" 1.0mm 34 cu in 10

34
 WEATHERPROOF BOXES

Weatherproof Boxes - 1 Gang

Depth: 2"
Length: 4-9/16"
Width: 2-13/16"
Copper-free die-cast aluminum
UL File No. E476800

FSB50-3 FSB50-4 FSB50-5 FSB50-5X

FSB75-3 FSB75-4 FSB75-5 FSB75-5X
Applications:
· For use in branch circuit wiring in wet, damp or dry locations
· May be used as a weatherproof junction box or as a housing for receptacles and switches

Cat. No. Hub Size No. of Holes Hole Location Color Standard Pkg
FSB50-3 1/2" 3 top, bottom, back Gray 50
FSB75-3 3/4" 3 top, bottom, back Gray 50
FSB50-4 1/2" 4 1 top, 2 bottom, 1 back Gray 50
FSB75-4 3/4" 4 1 top, 2 bottom, 1 back Gray 50
FSB50-5 1/2" 5 2 top, 2 bottom, 1 back Gray 50
FSB75-5 3/4" 5 2 top, 2 bottom, 1 back Gray 50
FSB50-5X 1/2" 5 1 at each side Gray 50
FSB75-5X 3/4" 5 1 at each side Gray 50
*Boxes supplied with 2 closure plugs, 1 grounding screw, and 2 mounting lugs with self-tapping screws.

Flanged Extension Ring - 1 Gang

Depth: 1-1/2"
Length: 5-3/16"
Width: 3-15/32"
Die Cast Aluminum

Application:
• Extension adaptors provide means for adding additional cubic capacity.
Cat. No. Hub Size No. of Holes Hole Location Color Standard Pkg
EXF50-4 1/2" 4 2 top, 2 bottom Gray 20
EXF75-4 3/4" 4 2 top, 2 bottom Gray 20

Weatherproof Blank Cover - 1 Gang

Dimension: 2-13/16" x 4-9/16"

Material: Steel
Application:
Where weatherproof protection is required while an outlet is in use.
Cat. No. Description Color Standard Pkg
1BC 1-Gang cover with gasket Gray 100
35
 WEATHERPROOF BOXES

Weatherproof Boxes - 2 Gang

Depth: 2"
Length: 4-9/16"
Width: 4-9/16"
Copper-free die-cast aluminum
UL File No. E476800
Applications:
· For use in branch circuit wiring in wet, damp or dry locations
· May be used as a weatherproof junction box or as a housing for receptacles and switches

TGB50-5 TGB50-5X TGB50-9 TGB50-7 TGB50-7X

TGB75-5 TGB75-5X TGB75-9 TGB75-7 TGB75-7X
Cat. No. Hub Size No. of Holes Hole Location Color Standard Pkg
TGB50-5 1/2" 5 2 top, 2 bottom, 1 back Gray 40
TGB75-5 3/4" 5 2 top, 2 bottom, 1 back Gray 40
TGB50-7 1/2" 7 3 top, 3 bottom, 1 back Gray 40
TGB75-7 3/4" 7 3 top, 3 bottom, 1 back Gray 40
3 top, 3 bottom, 1 each
TGB50-9 1/2" 9 Gray 40
side/back
3 top, 3 bottom, 1 each
TGB75-9 3/4" 9 Gray 40
side/back
TGB50-5X 1/2" 5 1 each side Gray 40
TGB75-5X 3/4" 5 1 each side Gray 40
2 top, 2 bottom, 1 each
TGB50-7X 1/2" 7 Gray 40
side/back
2 top, 2 bottom, 1 each
TGB75-7X 3/4" 7 Gray 40
side/back
*Boxes supplied with 2 closure plugs, 1 grounding screw, and 2 mounting lugs with self-tapping screws.

Weatherproof Blank Cover - 2 Gang

Dimension: 4-9/16" x 4-9/16"

Material: Steel
Application:
Where weatherproof protection is required while an outlet is in use.
Cat. No. Description Color Standard Pkg
2BC 2-Gang cover with gasket Gray 50
36
 WEATHERPROOF BOXES

4" Weatherproof Round Box

Depth: 1-1/2"
Copper-free die-cast aluminum
UL File No. E476800

Applications:
· For use in branch circuit wiring in wet, damp or dry locations
· May be used as a weatherproof junction box or as a housing for receptacles and switches

Cat. No. Hub Size No. of Holes Hole Location Color Standard Pkg
BRD-4 1/2" 5 1 each side/back Gray 40
RB-7 3/4" 5 1 each side/back Gray 40
*Boxes supplied with 2 closure plugs and 1 grounding screw

4" Round Box Extension Ring

Depth: 1-1/2"
Copper-free die-cast aluminum
UL File No. E476800

Application:
• Extension adaptors provide means for adding additional cubic capacity.

Cat. No. Hub Size No. of Holes Color Standard Pkg

EXR50-4 1/2" 4 Gray 32
EXR75-4 3/4" 4 Gray 40

4" Round Box Cover

Cat. No. Description Color Standard Pkg

Cover for 4" weatherproof
RBC4 Gray 100
round box, steel, with gasket

Closure Plug

Material: Zinc die-cast

Application: Designed for use with weatherproof boxes and extension rings.

Cat. No. Size Color Standard Pkg

PT-50-AL 1/2" Gray 800
PT-75-AL 3/4" Gray 500

37
 WEATHERPROOF JUNCTION BOXES

ABS WEATHERPROOF JUNCTION BOX

Features:
• Made of high quality ABS material for corrosion resistance
• Weighs about a quarter of the metal box with the same dimension for easier handling and installation
• Good insulation performance, impact resistance with IK 08 rating
• Temperature rating:-40℃ -+80℃ ( continuous); -40℃ -+100℃ ( short)
• Degree of protection: IP65
• With PU gasket, IP65
• Color: Grey, RAL7032

Application:
Ideal for indoor and outdoor applications such as airports, railway stations, petrochemical plant,
factories, mining sites, communication and electronics, and other commercial and industrial
applications as pushbutton box, terminal box, signal box, relay box, sensor box, etc.

Dimensions (mm) Thickness Fastening Standard

Cat. No.
Width Height Depth (mm) Screws Packing
MGJB-101050 100 100 50 2.5 4 1
MGJB-128050 120 80 50 2.5 4 1
MGJB-151170 150 110 70 2.5 4 1
MGJB-151570 150 150 70 2.5 4 1
MGJB-191470 190 140 70 2.5 4 1
MGJB-241990 240 190 90 2.5 4 1
MGJB-302212 300 220 120 2.5 4 1

*You may request technical drawings for each model if required.

38
 DISTRIBUTION BOXES
FLUSH MOUNTED CONSUMER ENCLOSURE

Features:
• Made of high quality self-extinguishing polycarbonate frame
• PC transparent gray cover, opens sideways
• Powder coated metal base, 1 mm thickness
• Resistant to abnormal heat up to 650°C/30S
• 230/400V, 50/60Hz, IP30
• Complies with IEC60670-1 and IEC60670-24

Application:
Clean and sleek design for residential and commercial establishments
Suited for the installation of all types of individual modular devices

Dimensions (mm) No. of Busbar Busbar

Cat. No.
L W H L1 W1 H1 Units (1P) (2P)
MGCE-08 243 210 107 220 186 80 8 63A 63A
MGCE-12 315 230 109 292 206 80 12 100A 63A
MGCE-16 387 230 109 364 206 80 16 100A 63A
MGCE-20 459 230 109 436 206 80 20 100A 63A
MGCE-24 315 360 109 292 336 80 24 100A 63A
MGCE-32 387 360 109 364 336 80 32 100A 63A

39
 METAL ENCLOSURES

Powder Coated Metal Enclosure

Features:
• Made of high quality electro-galvanized steel sheet of
1.2mm thickness
• Epoxy polyester coated in RAL7032
• Standard mounting plate, orange painted, 2mm thickness
• Easily removable hinges for changing the door opening
direction
• Degree of protection: IP66, Nema 4 and 12
• Complies with IEC60529

Application:
Designed to accommodate various types of switchgear and controlgear assemblies
to suit a variety of electrical installation, as well as provide a degree of protection
against dirt, dust, oil, and water.

Inclusion: Cabinet/door, mounting plate (2mm), locking system, gland plate, sealing gasket

Dimensions (mm) Standard

Cat. No. No. of Lock
Height Width Depth Packing
MG25315 300 250 150 1 1
MG3420 400 300 200 1 1
MG3520 500 300 200 1 1
MG4520 500 400 200 1 1
MG4620 600 400 200 2 1
MG5720 700 500 200 2 1
MG5725 700 500 250 2 1
MG6820 800 600 200 2 1
MG6825 800 600 250 2 1
MG81030 1000 800 300 2 1
MG81230 1200 800 300 2 1

40
 METAL ENCLOSURES

Stainless Steel Enclosure

Features:
• Made of SS304 stainless steel sheet of 1.2mm thickness
• 2mm Mounting plate, orange painted
• Easily removable hinges for changing the door opening direction
• Degree of protection: IP66, Nema 4, 4X
• Complies with IEC60529

Application:
Designed to house electrical controls, instruments and components in areas which
may be regularly house down or in wet or oily environments.

Inclusion: Cabinet/door, mounting plate (2mm), locking system, gland plate, sealing gasket

Dimensions (mm) Standard

Cat. No. No. of Lock
Height Width Depth Packing
MGSS25315 300 250 150 1 1

MGSS3420 400 300 200 1 1

MGSS4520 500 400 200 1 1

MGSS4620 600 400 200 2 1

MGSS5725 700 500 250 2 1

41
 CABLE TRUNKING
SLOTTED

Features:
- Self-extinguishing PVC, lead-free
- UL94 V-0 flammability rating
- Smooth edges protect hands and wire insulation
- Open slot design for easy insertion/removal of wires
- Continuous use temperature: -40˜+70°C
- Gray (RAL7042)
- with cover, 2M
- UL Listed #E492107

Application:
For routing and concealing of wires in a variety of industrial control and telecommunication applications.

W: 25/45/ W: 80 W: 100
50/65

Size Thickness Wires to be

Cat. No. Slot Size
mm (WxH) inch (WxH) mm connected Packing details
MGC2525 25 x 25 1x1 1.3 10-25pcs 90pcs/box
MGC2545 25 x 45 1 x 1-3/4 1.8 20-25pcs 54pcs/box
MGC3345 33 x 45 1-1/4 x 1-3/4 1.6 40-55 pcs 42pcs/box
MGC4545 45 x 45 1-3/4 x 1-3/4 1.6 60-70pcs 46pcs/box
MGC4565 45 x 65 1-3/4 x 2-1/2 2.1 110-120pcs 42pcs/box
8mm
MGC5050 50 x 50 2x2 1.8 80-90pcs 40pcs/box
MGC6565 65 x 65 2-1/2 x 2-1/2 1.8 180-200pcs 30pcs/box
MGC5080 50 x 80 2x3 2.2 160-180pcs 24pcs/box
MGC8080 80 x 80 3x3 2.0 240-290pcs 16pcs/box
MGC100100 100 x 100 4x4 2.2 300-400pcs 12pcs/box

42
 CABLE TRUNKING
SOLID

Features:
- High impact, self-extinguishing PVC, lead-free
- UL94 V-0 flammability rating
- Continuous use temperature: -40˜+70°C
- Cover design prevents slipping when in vertical orientation
- Smooth edges protect hands and wire insulation
- White (RAL9003)
- UL Listed #E492107
- Length: 2 meters

Application:
For routing, organizing, and protection of wires in applications requiring few or no breakout points.

Size Thickness Wires to be

Cat. No. Type
mm (WxH) inch (WxH) mm connected Packing details

MGC2525SW 25 x 25 1x1 solid 1.3 10-25pcs 90pcs/box

MGC5050SW 50 x 50 2x2 solid 1.8 80-90pcs 40pcs/box

43
 CABLE TIES
Cable Ties Polyamide 6.6

Features:
- PA 6.6, Natural
- Class 94V-2
- -35°C to 85°C operating temperature
- Inside serration for a strong hold
- UL File No. ZODZ2.E492107 Positioning Devices

Application:
- For general purpose application

Length Width Thickness Tensile Strength Standard

Cat. No. Color
Inch MM MM MM LB KG Pkg.
MG25080WH 3 3/16" 80 2.5 1.0 ± 0.05 Nat. White 18 8 100pcs/bag
MG25100WH 4" 100 2.5 1.0 ± 0.05 Nat. White 18 8 100pcs/bag
MG25120WH 4 3/4" 120 2.5 1.0 ± 0.05 Nat. White 18 8 100pcs/bag
MG25150WH 6" 150 2.5 1.0 ± 0.05 Nat. White 18 8 100pcs/bag
MG25200WH 8" 200 2.5 1.0 ± 0.05 Nat. White 18 8 100pcs/bag
MG36150WH 6" 150 3.6 1.2 ± 0.1 Nat. White 40 18 100pcs/bag
MG36200WH 8" 200 3.6 1.2 ± 0.1 Nat. White 40 18 100pcs/bag
MG36300WH 11 5/8" 300 3.6 1.2 ± 0.1 Nat. White 40 18 100pcs/bag
MG48200WH 8" 200 4.8 1.3 ± 0.1 Nat. White 50 22 100pcs/bag
MG48250WH 10" 250 4.8 1.3 ± 0.1 Nat. White 50 22 100pcs/bag
MG48300WH 11 5/8" 300 4.8 1.3 ± 0.1 Nat. White 50 22 100pcs/bag
MG48350WH 13 3/4" 350 4.8 1.3 ± 0.1 Nat. White 50 22 100pcs/bag
MG48370WH 14 3/5" 370 4.8 1.3 ± 0.1 Nat. White 50 22 100pcs/bag
MG76300WH 11 5/8" 300 7.6 1.5 ± 0.1 Nat. White 120 55 100pcs/bag
MG76350WH 13 3/4" 350 7.6 1.5 ± 0.1 Nat. White 120 55 100pcs/bag
MG76400WH 15 3/4" 400 7.6 1.5 ± 0.1 Nat. White 120 55 50pcs/bag
MG76450WH 17 3/4" 450 7.6 1.5 ± 0.1 Nat. White 120 55 50pcs/bag
MG90550WH 21 1/16" 550 9 1.8 ± 0.1 Nat. White 175 80 50pcs/bag
MG90650WH 25 9/16" 650 9 1.8 ± 0.1 Nat. White 175 80 50pcs/bag
MG90900WH 35 1/2" 900 9 1.8 ± 0.1 Nat. White 175 80 50pcs/bag

44
 CABLE TIES
Cable Ties Polyamide 6.6

Features:
- PA 6.6, Black
- Class 94V-2
- -35°C to 85°C operating temperature
- Inside serration for a strong hold
- UL File No. ZODZ2.E492107 Positioning Devices

Application:
- For extended life in outdoor applications

Length Width Thickness Tensile Strength

Cat. No. Color Packing
Inch MM MM MM LB KG
MG25080BK 3 3/16" 80 2.5 1.0 ± 0.05 Black 18 8 100pcs/bag
MG25100BK 4" 100 2.5 1.0 ± 0.05 Black 18 8 100pcs/bag
MG25120BK 4 3/4" 120 2.5 1.0 ± 0.05 Black 18 8 100pcs/bag
MG25150BK 6" 150 2.5 1.0 ± 0.05 Black 18 8 100pcs/bag
MG25200BK 8" 200 2.5 1.0 ± 0.05 Black 18 8 100pcs/bag
MG36150BK 6" 150 3.6 1.2 ± 0.1 Black 40 18 100pcs/bag
MG36200BK 8" 200 3.6 1.2 ± 0.1 Black 40 18 100pcs/bag
MG36300BK 11 5/8" 300 3.6 1.2 ± 0.1 Black 40 18 100pcs/bag
MG48200BK 8" 200 4.8 1.3 ± 0.1 Black 50 22 100pcs/bag
MG48250BK 10" 250 4.8 1.3 ± 0.1 Black 50 22 100pcs/bag
MG48300BK 11 5/8" 300 4.8 1.3 ± 0.1 Black 50 22 100pcs/bag
MG48350BK 13 3/4" 350 4.8 1.3 ± 0.1 Black 50 22 100pcs/bag
MG48370BK 14 3/5" 370 4.8 1.3 ± 0.1 Black 50 22 100pcs/bag
MG76300BK 11 5/8" 300 7.6 1.5 ± 0.1 Black 120 55 100pcs/bag
MG76350BK 13 3/4" 350 7.6 1.5 ± 0.1 Black 120 55 100pcs/bag
MG76400BK 15 3/4" 400 7.6 1.5 ± 0.1 Black 120 55 50pcs/bag
MG76450BK 17 3/4" 450 7.6 1.5 ± 0.1 Black 120 55 50pcs/bag
MG90550BK 21 1/16" 550 9 1.8 ± 0.1 Black 175 80 50pcs/bag
MG90650BK 25 9/16" 650 9 1.8 ± 0.1 Black 175 80 50pcs/bag
MG90900BK 35 1/2" 900 9 1.8 ± 0.1 Black 175 80 50pcs/bag
*MG76300, MG76350, MG76400, MG76450 are not UL/RU Listed
45
 CABLE TIES

Cable Tie Mount

Features:
- PA 66
- Class 94V-2
- Easy to peel off adhesive sticker
- Low profile design with four-way cable tie entry

Application:
- Used with nylon cable tie to secure cables to walls,
ceiling, desks or any other structure.

Screw
Cat. No. Height (mm) L x W (mm) Color Packing
Hole (mm)

MGCMT2020BK 6.1 20X20 2.9 Black 100pcs/bag

MGCMT2525BK 7.5 25X25 3.5 Black 100pcs/bag

MGCMT2020WH 6.1 20X20 2.9 White 100pcs/bag

MGCMT2525WH 7.5 25X25 3.5 White 100pcs/bag

46
 STAINLESS STEEL CABLE TIES
Cable Ties, SS304

Features:
- Ball-Lock Type
- High acid/chemical resistance
- Corrosion resistant
- Good tensile strength
- Working temperature: -40°C to 300°C
- Natural, uncoated finish

Application:
- Ideal for use in harsh environments such as chemical manufacturing,
oil platforms, shipbuilding, as well as in machine building and mass transit.

Size
Tensile Strength
Cat. No. Length Width Thickness Standard Packing
in mm mm (mm) lbs kgs
MGSSCT46200 7.87 200 4.6 0.25 135 60 100pcs/bag
MGSSCT46250 9.84 250 4.6 0.25 135 60 100pcs/bag
MGSSCT46300 11.8 300 4.6 0.25 135 60 100pcs/bag
MGSSCT79300 11.8 300 7.9 0.25 180 80 100pcs/bag
MGSSCT79350 13.78 350 7.9 0.25 180 80 100pcs/bag
MGSSCT79400 15.75 400 7.9 0.25 180 80 100pcs/bag
MGSSCT79500 19.69 500 7.9 0.25 180 80 100pcs/bag
MGSSCT79600 23.62 600 7.9 0.3 180 80 50pcs/bag
MGSSCT79700 27.56 700 7.9 0.3 180 80 50pcs/bag
MGSSCT79800 31.5 800 7.9 0.3 180 80 50pcs/bag
MGSSCT791000 39.4 1000 7.9 0.3 180 80 50pcs/bag
MGSSCT12800 31.5 800 12 0.3 270 120 50pcs/bag
MGSSCT121000 39.4 1000 12 0.3 270 120 50pcs/bag

47
 CABLE GLANDS
METRIC (M) TYPE CABLE GLANDS

Features:
- Nylon material
- Nitrile rubber gasket (NBR)
- Corrosion-resistant
- IP rating: IP68
- Working temperature: -40°C to 100°C (normal use);
120°C (short term use)
- Color: Black (RAL9005)

Application:
- For securing cables in machine tools, panels, junction boxes,
and other general wiring application.

Cable Range GL H AG Standard

Cat. No. Thread
mm mm mm mm mm Packing
MGCG-M12 M12 x 1.5 3-6.5 8 22 16 12 100pcs/bag

MGCG-M16 M16 x 1.5 5-10 8 27 22 16 100pcs/bag

MGCG-M20 M20 x 1.5 10-14 10 30 27 20 100pcs/bag

MGCG-M25 M25 x 1.5 13-18 10 35 33 25 100pcs/bag

MGCG-M32 M32 x 1.5 18-25 12 40 41/42 32 50pcs/bag

MGCG-M40 M40 x 1.5 22-32 14 48 52/53 40 20pcs/bag

MGCG-M50 M50 x 1.5 32-38 14 49 60/61 50 20pcs/bag

MGCG-M63 M63 x 1.5 37-44 14 50 67 63 20pcs/bag

48
 CABLE GLANDS
PG TYPE CABLE GLANDS

Features:
- Nylon material
- Nitrile rubber gasket (NBR)
- Corrosion-resistant
- IP rating: IP68
- Working temperature: -40°C to 100°C (normal use);
120°C (short term use)
- Color: Black (RAL9005)

Application:
- For securing cables in machine tools, panels, junction boxes,
and other general wiring application.

Cable Range GL H AG Standard

Cat. No. Thread
mm mm mm mm mm Packing
MGCG-PG7 PG7 3-6.5 8 22 16 12 100pcs/bag
MGCG-PG9 PG9 4-8 8 26 16 16 100pcs/bag
MGCG-PG11 PG11 5-10 8 27 22 18 100pcs/bag
MGCG-PG13 PG13.5 6-12 9 28 24 20 100pcs/bag
MGCG-PG16 PG16 10-14 10 30 27 22 100pcs/bag
MGCG-PG21 PG21 13-18 10 35 33 28 100pcs/bag
MGCG-PG29 PG29 18-25 12 40 41/42 37 50pcs/bag
MGCG-PG36 PG36 22-32 14 48 52/53 47 20pcs/bag
MGCG-PG42 PG42 32-38 14 49 60/61 54 20pcs/bag
MGCG-PG48 PG48 37-44 14 50 64/65 59 20pcs/bag

49
 CABLE GLANDS
NPT TYPE CABLE GLANDS

Features:
- Nylon PA, UL94-V0
- Nitrile rubber seal (NBR)
- Oil and chemical resistant
- IP rating: IP68/IP69K (the cable is in clamping range,
with O-Ring on the groove)
- Working temperature: -40°C to 100°C (normal use);
120°C (short term use)
- Color: Black (RAL9005)

Application:
- For securing cables in machine tools, panels, junction boxes,
in control and automation, PV and solar, and manufacturing industries

Cable Range GL H AG Standard

Cat. No. Thread
mm mm mm mm mm Packing

MGCG-NPT012 NPT1/2 6-12 13 24 21.2 100pcs/bag

27

MGCG-NPT034 NPT3/4 13-18 15 33 26.6 100pcs/bag

35

MGCG-NPT100 NPT1 18-25 16 42 33.3 50pcs/bag

40

50
 ALUMINUM COMPRESSION LUGS
Dual Rated - One Hole, Long Barrel
Features: Applications:
• Dual rated for aluminum and copper conductors • Termination of either aluminum or copper
• Manufactured from high strength aluminum alloy conductors (6AWG-1000MCM)
for maximum conductivity • For low to medium voltage up to 35kV
• Electro-tin plated for corrosion resistance • For indoor and outdoor use
• Color-coded end caps • 486B Listed AL9CU
• Internally beveled barrel provides quick and easy • UL File No. E498659
wire insertion

Conductor Stud Color Dimensions (mm) Standard

Catalog No.
Size Size Code O.D. I.D. A A1 B C Pkg
MG4016 6AWG 5/16 Gray 8.60 5.10 51.00 21.80 14.40 2.50 250
MG4020 4AWG 5/16 Green 11.20 6.40 58.60 27.00 14.40 4.80 100
MG4024 2AWG 3/8 Pink 13.50 7.90 63.50 30.50 18.00 5.50 75
MG4025 2AWG 1/2 Pink 13.50 7.90 63.50 30.50 18.00 5.50 75
MG4028 1AWG 3/8 Gold 13.50 8.90 63.50 30.50 18.50 4.50 75
MG4029 1AWG 1/2 Gold 13.50 8.90 63.50 30.50 18.50 4.50 75
MG4032 1/0AWG 3/8 Tan 16.00 9.90 71.30 30.50 21.50 6.10 50
MG4033 1/0AWG 1/2 Tan 16.00 9.90 71.30 30.50 21.50 6.10 50
MG4037 2/0AWG 1/2 Olive 17.50 11.20 71.30 33.00 23.80 6.10 50
MG4041 3/0AWG 1/2 Ruby 19.30 12.20 76.20 35.60 26.10 7.10 50
MG4045 4/0AWG 1/2 White 21.30 14.00 87.10 35.60 29.20 7.30 30
MG4046 4/0AWG 5/8 White 21.30 14.00 87.10 35.60 29.20 7.30 35
MG4049 250MCM 1/2 Red 23.40 15.00 88.90 38.10 32.00 8.10 25
MG4053 300MCM 1/2 Dark Blue 25.70 16.50 101.60 40.60 34.80 8.80 15
MG4056 350MCM 1/2 Brown 28.40 18.30 107.90 48.30 38.60 9.90 12
MGACL-400-1/2 400MCM 1/2 Green 30.20 19.30 118.80 58.40 40.80 10.60 10
MG4067 500MCM 5/8 Pink 33.50 21.30 120.60 63.50 45.40 11.90 10
MGACL-600-1/2 600MCM 1/2 Black 36.60 23.30 130.00 65.00 49.70 12.90 8
MG4073 750MCM 5/8 Yellow 40.60 26.20 155.40 81.30 55.60 12.90 7
MG4079 1000MCM 5/8 Brown 45.98 29.40 155.40 81.30 63.50 15.00 4
51
 ALUMINUM COMPRESSION LUGS

Dual Rated - Two-Hole, Long Barrel

Features: Applications:
• Dual rated for aluminum and copper conductors • Termination of either aluminum or copper
• Manufactured from high strength aluminum alloy conductors (4/0-1000MCM)
for maximum conductivity • For low to medium voltage up to 35kV
• Electro-tin plated for corrosion resistance • For indoor and outdoor use
• Color-coded end caps • 486B Listed AL9CU
• Internally beveled barrel provides quick and easy • UL File No. E498659
wire insertion

Conductor Stud Color Dimensions (mm) Standa

Catalog No.
Size Size Code O.D. I.D. A A1 B C rd Pkg
MG4145 4/0 AWG 1/2 white 21.30 14.00 133.30 35.60 29.20 7.30 20

MG4149 250MCM 1/2 red 23.40 15.00 134.80 38.10 32.00 8.10 15

MG4153 300MCM 1/2 blue 25.70 16.50 139.70 40.60 34.80 8.80 10

MG4156 350MCM 1/2 brown 28.40 18.30 149.10 48.30 38.60 9.90 10

MG4160 400MCM 1/2 green 30.20 19.30 163.30 58.40 40.80 10.60 10

MG4166 500MCM 1/2 pink 33.50 21.30 165.10 63.50 45.40 11.90 10
MG2ACL-600-
600MCM 1/2 Black 36.60 23.40 171.40 66.00 49.70 12.90 6
1/2
MG4172 750MCM 1/2 yellow 40.60 26.20 187.20 81.30 55.60 13.90 7

MG4178 1000MCM 1/2 brown 45.98 29.40 200.00 92.00 63.50 15.80 4

52
 ALUMINUM COMPRESSION SPLICES

Dual-Rated Compression Splices

Features: Applications:
• Manufactured from high strength aluminum alloy • Dual rated for use on all combinations of
for maximum conductivity aluminum to aluminum, aluminum to copper, and
• Electro-tin plated for corrosion resistance copper to copper conductor combinations
• Pre-filled with oxide inhibitor compound • For low to medium voltage up to 35kV
• Color-coded end caps and crimp mark • For indoor and outdoor use
• 486B Listed AL9CU
• UL File No. E498659

Inside Dia. Length

Catalog No. Conductor Size Color Code Standard Pkg
mm in mm in
MGACS-8 8 STR Blue 4.00 0.16 35.00 1.38 500
MGACS-6 6 STR Gray 5.10 0.20 41.40 1.63 400
MGACS-4 4 STR Green 6.30 0.25 50.80 2.00 200
MGACS-2 2 STR Pink 7.80 0.31 60.40 2.38 125
MGACS-1/0 1/0 STR Tan 9.90 0.39 63.50 2.50 75
MGACS-2/0 2/0 STR Olive 11.20 0.44 66.80 2.63 60
MGACS-3/0 3/0 STR Ruby 12.20 0.48 73.10 2.88 50
MGACS-4/0 4/0 STR White 14.00 0.55 79.50 3.13 40
MGACS-250 250 MCM Red 15.00 0.59 82.50 3.25 35
MGACS-300 300 MCM Blue 16.50 0.65 82.50 3.25 30
MGACS-350 350 MCM Brown 18.30 0.72 98.50 3.88 20
MGACS-400 400 MCM Green 19.30 0.76 123.90 4.88 15
MGACS-500 500 MCM Pink 21.30 0.84 127.00 5.00 12

53
 ALUMINUM MECHANICAL LUGS

Dual Rated - One Conductor, One Hole

Features: Applications:
• Dual rated for aluminum and copper conductors • For use with either copper or aluminum conductors
• Manufactured from high strength aluminum alloy • Rated 600V at 90°C
6061-T6 for maximum conductivity • 486B Listed AL9CU
• Electro-tin plated for low contact resistance • UL File No. E498659
and corrosion resistance
• Chamfered wire entry for ease of installation

Bolt Dimensions (in) Standard

Cat. No. Wire Range
Size L W G H F Pkg
MGL-A6 4-14AWG 1/4 1.063 0.500 0.378 0.500 0.094 50
MGL-A2 2-14AWG 1/4 1.157 0.500 0.472 0.551 0.108 200
MGL-A0 1/0-14AWG 1/4 1.460 0.626 0.622 0.787 0.185 50
MGLA-2/0 2/0-14AWG 1/4 1.460 0.626 0.622 0.787 0.185 50
MGLA-250 250MCM-6AWG 5/16 2.000 1.000 1.000 1.118 0.252 25
MGLA-300 300MCM-6AWG 1/4 2.000 0.856 1.000 1.118 0.252 25
MGLA-350 350MCM-6AWG 3/8 2.250 1.126 1.124 1.252 0.252 20
MGLA-500 500MCM-4AWG 3/8 2.815 1.500 1.224 1.567 0.315 10
MGLA-600 600MCM-2AWG 3/8 3.189 1.500 1.381 1.567 0.437 10
MGLA-800 800-300MCM 5/8 3.374 1.752 1.624 1.937 0.500 10
MGLA-1000 1000-500MCM 5/8 3.374 1.752 1.624 1.937 0.500 10

54
 ALUMINUM MECHANICAL LUGS
Dual Rated - One Conductor, Two Holes

Features: Applications:
• Dual rated for aluminum and copper conductors • For use with either copper or aluminum conductors
• Manufactured from high strength aluminum alloy • Rated 600V at 90°C
6061-T6 for maximum conductivity • 486B Listed AL9CU
• Electro-tin plated finish for low contact resistance • UL File No. E498659
and protection against corrosion
• Chamfered wire entry for ease of installation

Standard
Dimensions (in) Pkg
Cat. No. Wire Range Bolt Size
L W G H F
MGLA-350-
350MCM-6AWG 1/2 4.126 1.125 1.125 1.250 0.313 20
2NS
MGLA-600-
600MCM-2AWG 1/2 4.216 1.500 1.500 1.566 0.437 10
2NS
MGLA-800-
800-300MCM 1/2 4.616 1.752 1.624 1.937 0.500 10
2NS
MGLA-1000-
1000MCM-500MCM 1/2 5.616 1.752 1.624 1.937 0.500 10
2NS

55
 ALUMINUM MECHANICAL LUGS
Dual Rated - Two Conductors, One Hole

Features: Applications:
• Dual rated for aluminum and copper conductors • For use with either copper or aluminum conductors
• Manufactured from high strength aluminum alloy • Rated 600V at 90°C
6061-T6 for maximum conductivity • 486B Listed AL9CU
• Electro-tin plated finish for low contact resistance • UL File No. E498659
and protection against corrosion
• Chamfered wire entry for ease of installation

Dimensions (in) Standard

Cat. No. Wire Range Bolt Size
L W G H F Pkg
MGL2A-0 TWO - 1/0-14AWG 1/4 1.460 1.219 0.622 0.787 0.185 50

MGL2A-2/0 TWO - 2/0-14AWG 1/4 1.461 1.252 0.622 0.787 0.185 10

MGL2A-250 TWO - 250MCM-6AWG 3/8 2.563 1.657 1.000 1.189 0.252 10

MGL2A-350 TWO - 350MCM-6AWG 1/2 2.874 1.913 1.126 1.224 0.252 10

MGL2A-600 TWO - 600MCM-2AWG 1/2 3.189 2.406 1.382 1.567 0.437 5

MGL2A-800 TWO - 800-300MCM 5/8 3.374 3.185 1.624 1.937 0.500 5

MGL2A-1000 TWO - 1000-500MCM 5/8 3.413 3.185 1.624 1.937 0.500 5

56
 ALUMINUM MECHANICAL LUGS
Dual Rated - Two Conductors, Two Holes

Features: Applications:
• Dual rated for aluminum and copper conductors • For use with either copper or aluminum conductors
• Manufactured from high strength aluminum alloy • Rated 600V at 90°C
6061-T6 for maximum conductivity • 486B Listed AL9CU
• Electro-tin plated finish for low contact resistance • UL File No. E498659
and protection against corrosion
• Chamfered wire entry for ease of installation

Bolt Dimensions (in) Standard

Cat. No. Wire Range
Size L W H F G Pkg
MGL2A-350-
TWO - 350MCM-6AWG 1/2 4.120 1.913 1.224 0.252 1.126 5
2NS
MGL2A-600-
TWO - 600MCM-2AWG 1/2 5.580 2.406 1.567 0.437 1.382 5
2NS
MGL2A-800-
TWO - 800-350MCM 1/2 4.616 3.189 1.937 0.500 1.624 4
2NS
MGL2A-1000-
TWO - 1000-500MCM 1/2 4.616 3.185 1.937 0.500 1.624 4
2NS

57
 ALUMINUM MECHANICAL LUGS
Dual Rated - Three Conductors, Two Holes

Features: Applications:
• Dual rated for aluminum and copper conductors • For use with either copper or aluminum conductors
• Manufactured from high strength aluminum alloy • Rated 600V at 90°C
6061-T6 for maximum conductivity • 486B Listed AL9CU
• Electro-tin plated finish for low contact resistance • UL File No. E498659
and protection against corrosion
• Chamfered wire entry for ease of installation

Bolt Dimensions (in) Standard

Cat. No. Wire Range
Size L W G H F Pkg
MGL3-A0 THREE - 1/0-14AWG 3/8 2.905 2.000 0.759 0.874 0.252 10

MGL3A-3/0 THREE - 3/0-6AWG 1/2 3.858 2.126 0.866 1.112 0.315 10

MGL3A-250 THREE - 250MCM-6AWG 1/2 4.126 2.830 1.126 1.250 0.313 10

MGL3A-350 THREE - 350MCM-6AWG 1/2 4.126 3.000 1.126 1.250 0.313 10

58
 ALUMINUM MECHANICAL LUGS
Dual Rated - Three Conductors, Six Holes

Features: Applications:
• Dual rated for aluminum and copper conductors • For use with either copper or aluminum conductors
• Manufactured from high strength aluminum alloy • Rated 600V at 90°C
6061-T6 for maximum conductivity • 486B Listed AL9CU
• Electro-tin plated finish for low contact resistance • UL File No. E498659
and protection against corrosion
• Chamfered wire entry for ease of installation

Bolt Dimensions (in) Standard

Cat. No. Wire Range
Size L W G H F Pkg

MGL3A-600 THREE - 600MCM-2AWG 1/2 5.582 3.756 2.520 1.624 0.437 4

MGL3A-800 THREE - 800-350MCM 1/2 5.748 4.567 2.756 1.937 0.500 2

MGL3A-1000 THREE - 1000-500MCM 1/2 5.748 4.567 2.756 1.937 0.500 2

59
 ALUMINUM MECHANICAL LUGS
Dual Rated - Four Conductors, Ten Holes

Features: Applications:
• Dual rated for aluminum and copper conductors • For use with either copper or aluminum conductors
• Manufactured from high strength aluminum alloy • Rated 600V at 90°C
6061-T6 for maximum conductivity • 486B Listed AL9CU
• Electro-tin plated for corrosion resistance • UL File No. E498659
• Chamfered wire entry for ease of installation

Bolt Size Dimensions (in) Standard

Cat. No. Wire Range
L W G H F Pkg

MGL4A-600N FOUR - 2AWG-600MCM 1/2 5.582 5.512 2.519 1.624 0.437 2

60
 ALUMINUM PANELBOARD LUGS

Dual Rated - Stack Design, 2 Conductors

Features: Applications:
• Dual rated for aluminum and copper conductors • For use with either copper or aluminum conductors
• Manufactured from high strength aluminum alloy • Rated 600V at 90°C
6061-T6 for maximum conductivity • 486B Listed AL9CU
• Electro-tin plated for corrosion resistance • UL File No. E498659
• Chamfered wire entry for ease of installation

Conduc Bolt Dimensions (in) Standard

Cat. No. Wire Range
tors Size ØD L W G H F Pkg

MB2-350 350MCM-6AWG 2 5/16 3.000 1.000 2.000 2.000 0.315 20

61
 ALUMINUM PANELBOARD LUGS

Dual Rated - Stack Design, Two Conductors, Two Holes

Features: Applications:
• Dual rated for aluminum and copper conductors • For use with either copper or aluminum conductors
• Manufactured from high strength aluminum alloy • Rated 600V at 90°C
6061-T6 for maximum conductivity • 486B Listed AL9CU
• Electro-tin plated for corrosion resistance • UL File No. E498659
• Chamfered wire entry for ease of installation

Conduc Bolt Dimensions (in) Standard

Cat. No. Wire Range
tors Size ØD L W G H F Pkg
MB2-600 600MCM-2AWG 2 3/8 4.940 1.496 2.559 3.000 0.756 8

MB2-750 750MCM-1/0AWG 2 3/8 4.940 1.574 2.559 3.000 0.756 8

62
 ALUMINUM PANELBOARD LUGS

Dual Rated - Stack Design, Three Conductors

Features: Applications:
• Dual rated for aluminum and copper conductors • For use with either copper or aluminum conductors
• Manufactured from high strength aluminum alloy • Rated 600V at 90°C
6061-T6 for maximum conductivity • 486B Listed AL9CU
• Electro-tin plated for corrosion resistance • UL File No. E498659
• Chamfered wire entry for ease of installation

Conduc Bolt Dimensions (in) Standard

Cat. No. Wire Range
tors Size ØD L W G H F Pkg
MB3-600 600MCM-2AWG 3 3/8 4.941 2.677 2.559 2.992 0.756 2

63
 ALUMINUM PANELBOARD LUGS

Dual Rated - Stack Design, Four Conductors

Features: Applications:
• Dual rated for aluminum and copper conductors • For use with either copper or aluminum conductors
• Manufactured from high strength aluminum alloy • Rated 600V at 90°C
6061-T6 for maximum conductivity • 486B Listed AL9CU
• Electro-tin plated for corrosion resistance • UL File No. E498659
• Chamfered wire entry for ease of installation

10.5 Ø 2 HOLES (600)

13.5 Ø 2 HOLES (750)

Conduct Bolt Dimensions (in) Standard

Cat. No. Wire Range
ors Size ØD L W G H F Pkg
MB4-600 600MCM-2AWG 4 3/8 4.941 2.677 2.559 2.992 0.756 2

MB4-750 750MCM-1/0AWG 4 3/8 4.941 2.834 2.559 2.992 0.756 2

64
 COPPER NEUTRAL BARS

• Manufactured from high strength copper tubing

• Range taking
• For copper conductor only

Mounting
No. of
Cat. No. No. of Taps Dimensions (in) Hole Mounting Standard
Holes
Conductor Range L W H Size Position Pkg
MGCNB6-8 6 8 4-14 AWG 2.560 0.310 0.440 0.250 1&8 200

MGCNB12-14 12 14 4-14 AWG 4.430 0.310 0.440 0.250 1 & 14 200

65