UENR4070

November 2014
FLUID POWER SYMBOLS
BASIC COMPONENT SYMBOLS

MAIN AUX

PUMP OR MOTOR FLUID CONDITIONER SPRING CONTROL VALVES RESTRICTION LINE RESTRICTION PUMP PUMP
(FIXED) (2 - SECTION) (VARIABLE & PRESSURE
COMPENSATED)

Component Locations VARIABILITY SPRING

(ADJUSTABLE)
LINE RESTRICTION
(VARIABLE)
PRESSURE
COMPENSATION
HYDRAULIC PNEUMATIC
ENERGY TRIANGLES
LINE RESTRICTION
(VARIABLE & PRESSURE
ATTACHMENT

COMPENSATED)
Part Machine Schematic VALVES
Description VALVE ENVELOPES VALVE PORTS
Number Location Location

Breather 9G-5127 1 E-6

ONE POSITION TWO POSITION THREE POSITION TWO - WAY THREE - WAY FOUR - WAY
Core AS - Oil Cooler 187-3523 2 C-2
Filter GP - Power Train Oil 295-0711 3 B-1 CONTROL VALVES CHECK VALVES
AB A B
Generator GP 367-9762 4 D-4
Propulsion GP - Electric 396-4854 5 C-7 P T P T
BASIC SPRING SHUTTLE PILOT
NORMAL POSITION SHIFTED POSITION INFINITE POSITION
Pump GP - Scavenge / Lube 365-1454 6 B-5 SYMBOL LOADED CONTROLLED

Screen AS - Suction 9P-0217 7 D-6 FLUID STORAGE RESERVOIRS

Sensor GP - Temperature, PT Oil 145-7028 8 D-4
Tank AS - Powertrain Oil 382-2597 9 E-5
Valve GP - Relief, Cold Oil 148-1928 10 B-3
D7E Track-Type Tractor
VENTED PRESSURIZED RETURN ABOVE FLUID LEVEL RETURN BELOW FLUID LEVEL

MEASUREMENT ROTATING SHAFTS

Power Train System

PRESSURE TEMPERATURE FLOW UNIDIRECTIONAL BIDIRECTIONAL

HKA1-UP COMBINATION CONTROLS

SSH1-UP
SOLENOID SOLENOID SOLENOID SOLENOID & SERVO THERMAL DETENT
OR MANUAL & PILOT PILOT OR MANUAL

MANUAL CONTROL SYMBOLS

Tap Locations
Pressure and Sampling
Tap Schematic PUSH - PULL LEVER MANUAL SHUTOFF GENERAL MANUAL PUSH BUTTON PEDAL SPRING
Description
Number Location RELEASED PRESSURE PILOT CONTROL SYMBOLS REMOTE SUPPLY PRESSURE
L1 Lube Oil Pressure D-7
SOS Lube Oil Sampling B-2
EXTERNAL RETURN INTERNAL RETURN SIMPLIFIED COMPLETE INTERNAL
SUPPLY PRESSURE

ACCUMULATORS CROSSING & JOINING LINES HYDRAULIC & PNEUMATIC CYLINDERS

SPRING LOADED GAS CHARGED LINES CROSSING LINES JOINING SINGLE ACTING DOUBLE ACTING

HYDRAULIC PUMPS HYDRAULIC MOTORS INTERNAL PASSAGEWAYS

FIXED VARIABLE DISPLACEMENT FIXED VARIABLE DISPLACEMENT INFINITE

DISPLACEMENT NON-COMPENSATED DISPLACEMENT NON-COMPENSATED POSITIONING 3 POSITION 2 POSITION

UNIDIRECTIONAL UNIDIRECTIONAL

FLOW IN ONE PARALLEL CROSS FLOW IN

BIDIRECTIONAL BIDIRECTIONAL DIRECTION FLOW FLOW EITHER
DIRECTION

© 2014 Caterpillar, All Rights Reserved Printed in U.S.A.

L1 8 4
ELECTRICAL SYMBOLS TABLE
HYDRAULIC SYMBOLS (ELECTRICAL)

G
M
TRANSDUCER TRANSDUCER GENERATOR ELECTRIC MOTOR

(Dimensions: 34 inches x 24 inches)

(FLUID) (GAS / AIR)

PRESSURE SWITCH PRESSURE SWITCH TEMPERATURE ELECTRICAL WIRE

(ADJUSTABLE) SWITCH

UENR4070
ELECTRICAL SYMBOLS (ELECTRICAL)
5
T

PRESSURE TEMPERATURE LEVEL FLOW

SWITCH SWITCH SWITCH SWITCH

WIRE NUMBER IDENTIFICATION CODES

ELECTRICAL SCHEMATIC EXAMPLE HYDRAULIC SCHEMATIC EXAMPLE

CURRENT STANDARD CURRENT STANDARD

HARNESS IDENTIFICATION CODE THIS EXAMPLE

INDICATES WIRE 135 IN HARNESS “AG”
WIRE

16 Page,
CIRCUIT NUMBER
325-AG135 PK-14 IDENTIFICATION WIRE COLOR

CIRCUIT NUMBER WIRE WIRE GAUGE

IDENTIFICATION COLOR 325-PK

9 PREVIOUS STANDARD

WIRE WIRE COLOR

1 7 10 6 2 SOS 3 325-PK-14 B A

CIRCUIT NUMBER WIRE GAUGE (EXAMPLE VALVE)

IDENTIFICATION

COMPONENT LOCATIONS
 7 6 5 4 3 2 1

(1) BREATHER
9G-5127

E E
(9) TANK AS - PTO
382-2597

L1 POWERTRAIN
OIL TANK
ENGINE
GENERATOR
D D

C9

(4) GENERATOR GP
(8) SENSOR GP 367-9762
TEMPERATURE.
PT OIL
(7 ) SCREEN AS 145-7028
SUCTION
9P-0217

(5) PROPULSION GP
ELECTRIC
396-4854

C C

SCAVENGE LUBE STEERING PUMP

(2) CORE AS
POWER TRAIN OIL COOLER
187-3523
(3) FILTER GP
POWER TRAIN OIL
295-0711
(6) PUMP GP
(Dimensions: 34 inches x 24 inches)

SCAVENGE / LUBE
365-1454
UENR4070

B B

SOS

HYDRAULIC CIRCUIT COLOR DESCRIPTIONS

(10) VALVE GP SCAVENGE PUMP SUPPLY
SUPPLY LINE
RELIEF (COLD OIL) BRAKE CIRCUIT
148-1928 HYDRAULIC DRAIN LINE
LUBE PUMP OUTPUT

LINE PATTERNS
Pressure Line

Pilot / Load Sensing Pressure

16 Page,

Drain / Return Lines

Component Group

CALLOUTS
A YY Taps (Pressure, Sampling, Sensor - by letter) A
Callout Number Component
(Machine Location from (52) VALVE GP - CONTROL Name
Component LocationsTable)
138-1234 Part Number

THIS SCHEMATIC IS FOR THE D7E POWER TRAIN SYSTEM

MEDIA NUMBER: UENR4070
SCHEMATIC PART NUMBER: 448-1604, CHANGE: 00, VERSION: -
Components are shown installed on a fully operable machine with the key and engine off, transmission shifter
in neutral and with parking brake set.
Refer to the appropriate Service Manual for Troubleshooting, Specifications and Systems Operations.
Refer to the Parts Manual using a specific serial number prefix in SIS before ordering parts from this schematic.

7 6 5 4 3 2 1