Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 78 views

    Siemens S7 1200 Symbolic Addressing Ethernet

    Uploaded by

    Salome Bitutu
    This document provides instructions for connecting an EasyBuilder HMI to a Siemens S7-1200 PLC using Ethernet communication. It describes the recommended HMI and PLC settings, how to export tags from the PLC program to import into EasyBuilder, and notes for connecting to different versions of the S7-1200 firmware. The supported data types between the PLC and EasyBuilder are also listed.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Siemens S7 1200 Symbolic Addressing Ethernet

    Uploaded by

    Salome Bitutu
    78 views14 pages
    This document provides instructions for connecting an EasyBuilder HMI to a Siemens S7-1200 PLC using Ethernet communication. It describes the recommended HMI and PLC settings, how to export tags from the PLC program to import into EasyBuilder, and notes for connecting to different versions of the S7-1200 firmware. The supported data types between the PLC and EasyBuilder are also listed.

    Original Title

    Siemens_S7_1200_Symbolic_Addressing_Ethernet

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides instructions for connecting an EasyBuilder HMI to a Siemens S7-1200 PLC using Ethernet communication. It describes the recommended HMI and PLC settings, how to export tags from the PLC program to import into EasyBuilder, and notes for connecting to different versions of the S7-1200 firmware. The supported data types between the PLC and EasyBuilder are also listed.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    78 views14 pages

    Siemens S7 1200 Symbolic Addressing Ethernet

    Uploaded by

    Salome Bitutu
    This document provides instructions for connecting an EasyBuilder HMI to a Siemens S7-1200 PLC using Ethernet communication. It describes the recommended HMI and PLC settings, how to export tags from the PLC program to import into EasyBuilder, and notes for connecting to different versions of the S7-1200 firmware. The supported data types between the PLC and EasyBuilder are also listed.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 14

    PLC Connection Guide

    Siemens S7-1200 (Symbolic Addressing)


    (Ethernet)
    Supported Series: Siemens S7-1200 series Ethernet.
    Website: http://www.siemens.com/entry/cc/en/

    HMI Setting:
    Parameters Recommended Options Notes
    PLC type Siemens S7-1200 (Symbolic Addressing) (Ethernet)
    PLC I/F Ethernet
    Port no. 102
    Rack 0
    CPU slot 1

    On-line simulator Yes Multi-HMI connect TIA Settings *Note

    *Note:
    According to Connection resource / HMI Communication settings
    PLC Connection Guide

    PLC Setting:
    1. In S7-1200 program software create PLC program and tag and then download to
    PLC.
    2. Select Go offline, EasyBuilder will connect to PLC and get tag data. In PLC type
    select “SIEMENS S7-1200 (Ethernet)”.

    3. Click “Settings…”, input PLC IP address.


    PLC Connection Guide
    4. Check the PLC that is not connected to any PC. Click “Get tag info…”.
    5. Supported by firmware V3.X and previous versions. For V4.0 or later, please see How
    to Connect With S7-1200 Firmware V4.0)
    PLC Connection Guide
    6. If the software used is a version later than TIA Portal V11，SP2, a dialog of
    FunctionBlock directory will be shown, users have to define the mapping from FB to
    DB in this directory then click “Check OK”. The tag information will be gained and
    a successful message is shown.
    PLC Connection Guide
    7. When opening an existing project and get the tag information again, if the PLC
    software used is TIA Portal V12 and later versions, the DB name must be entered
    again in order to compile the project.

    8. Added Tag Manager that allows selecting the Siemens S7-1200 PLC tags to be
    imported.
    PLC Connection Guide
    9. Create an object and click read address “Setting…”

    10. In PLC name select S7-1200 then click Tag.

    11. Select PLC tag.


    PLC Connection Guide

    How to Connect With S7-1200 Firmware V4.0


    There are certain restrictions in S7-1200 firmware V4.0, therefore, to avoid communication
    errors, please follow the steps to set up.( EasyBuilder8000 does not support Siemens
    S7-1200 firmware V4.0 and later versions).

    Right click on the PLC program, and then click [Properties].

    Select [Protection], and then select [Permit access with PUT/GET communication
    from remote partner (PLC,HMI,OPC,…].

    The following part introduces how to export S7-1200 PLC Tags and Program Blocks.
    PLC Connection Guide
    Exporting PLC Tags (I,Q,M tags)
    1. Under [PLC tags] select [Show all tags].

    2. Click [Export] to export the tags.

    3. Browse for the directory to save the exported file and then click [OK].
    PLC Connection Guide
    Exporting Program Blocks(DB)
    1. When the database contains Struct data type, please note the following restrictions.
    Please at least add one data member that doesn’t belong to Struct data type into DB,
    otherwise, the data cannot be imported to EasyBuilder.
    Multidimensional Arrays and Multilayer Structs are not supported.
    After building DB, please do the following actions for Struct address:
    (1) Copy the complete Struct data.
    (2) Delete data.
    (3) Add a new row.
    (4) Paste data.

    2. Right click on DB, click [Generate source from blocks], and then enter the file name
    to save.
    PLC Connection Guide
    After building and importing PLC Tags and Program Blocks, click [Download to device].

    Importing PLC Tags and Program Blocks(DB)


    1. Launch EasyBuilder and set the IP address.

    2. Click [Import Tag…].


    PLC Connection Guide
    3. Select the PLC Tags and Program Blocks to be imported. Please remember to change
    DB number, and select [Use S7-1200 firmware version 4.0 or later versions]. Click
    [Import] to import the files. The I, Q, and M addresses will be checked, if an error
    occurs, the communication will fail. If this happens, please check your communication
    environment, and try to import again.
    * At least one db file must be imported. If only plc tags cannot be imported
    successfully.

    4. The “Import status” field will display the result, click [OK].
    PLC Connection Guide
    5. Select the tags to be imported and then click [OK].

    6. The following message is displayed when the import has succeed.


    PLC Connection Guide

    Support Device Type:


    S7-1200 data type EasyBuilder data format Memo
    Bool bit
    Byte 16-bit BCD, Hex, Binary, Unsigned 8-bit
    SInt 16-bit BCD, Hex, Binary, Signed 8-bit
    USInt 16-bit BCD, Hex, Binary, Unsigned 8-bit
    Word 16-bit BCD, Hex, Binary, Unsigned 16-bit
    Int 16-bit BCD, Hex, Binary, Signed 16-bit
    UInt 16-bit BCD, Hex, Binary, Unsigned 16-bit
    DWord 32-bit BCD, Hex, Binary, Unsigned 32-bit
    DInt 32-bit BCD, Hex, Binary, Signed 32-bit
    Real 32-bit Float 32-bit
    UDInt 32-bit BCD, Hex, Binary, Unsigned 32-bit
    LInt 64-bit Signed 64-bit

    ULInt 64-bit Unsigned 64-bit

    LWord 64-bit Unsigned 64-bit

    Double 64-bit Float 64-bit

    Char 16-bit BCD, Hex, Binary, Unsigned USInt


    CREF Struct
    Date 16-bit BCD, Hex, Binary, Unsigned UInt
    DTL Read only
    ErrorStruct
    IEC_COUNTER
    IEC_DCOUNTER
    IEC_SCOUNTER
    IEC_TIMER
    IEC_UCOUNTER
    IEC_UDCOUNTER
    IEC_USCOUNTER
    NREF
    PLC Connection Guide
    S7-1200 data type EasyBuilder data format Memo
    Time 32-bit BCD, Hex, Binary, Unsigned DWord
    Time_Of_Day 32-bit BCD, Hex, Binary, Unsigned DWord
    Bool, Byte, SINT,
    USInt, Word, Int,
    Array UInt, DWord, Dint,
    Real, UDInt
    Bool, Byte, SINT,
    USInt, Word, Int,
    Struct UInt, DWord, Dint,
    Real, UDInt
    Note: EBPro V6.03.02 or later supports 64 bits data type (cMT Series only), but please
    note that the address limit range is 48 bits in maximum.

    Wiring Diagram:
    Ethernet cable:

    You might also like