NOTES

60 - 80m
CONSTRUCTION METHOD: SPEED HUMPS

1. Setting out of hump - few days before

construction.
2. Saw cuts one to two days before construction.

RED ON CONSTRUCTION DAY:

ROAD STUD STYMSONITE 88
W416 W417
YELLOW / BLANK OR SIMILAR 3. Remove 500 mm asphalt strips.
APPROVED 4. Start erecting road signs and paint warning road
marking.
WHITE
NOTE: 5. Place asphalt in strips and compact with two
HIGH INTENSITY GRADE passes without vibrator.
±30m RED
RETRO-REFLECTIVE SHEETING 6. Place templates - both sides of one lane at a time.
1,4 CHROMADECK BACKING PLATE
7. Place asphalt and rake till slightly higher than
templates.
8. Shape asphalt with straight edge (channel
section 6 m long).
9. Remove templates and compact without vibrator
(three passes)
10. Measure profile and rectify if necessary.
11. Final compaction with three to four passes with
DANGER PLATE SPEEDHUMP (LEFT) vibrator.
ROAD STUD STYMSONITE 88
12. Place road studs.
RED / RED W416 13. Paint speed hump the next day.
B B ±30m SCALE 1:10
2. Traffic Signs:
A
2.1 Only galvanised bolts and nuts to be used on W
and R series (no uni-struts)

2.2 All signs must be according to the Road Traffic

Signs Manuals but use 900Φ STOP (60km/h
W417 W416 zone) for 3-way and 4-way stops

2.3 All signs excluding R1 series must have rounded

RED
A edges

3. ROADMARKINGS:
All new road markings in thermoplastic
WHITE
Colour Paint application Premix bead application Initial coefficient of retro-
NOTE: rate (mm) rate (%) retro-reflective
60 - 80m (minicandelas/lux/m2)
RED HIGH INTENSITY GRADE
WHITE 1.2 35 200
RETRO-REFLECTIVE SHEETING
1,4 CHROMADECK BACKING PLATE YELLOW 1.2 35 135

PLAN OF SPEED HUMP NOTE:

NOTE
SCALE 1:100 1. Traffic Signs: The Trafic Engineering and Operation section
1.1 Only galvanised bolts and nuts to be used on W and R series (no uni-struts) must always be consulted to assist with the setting
1.2 All signs must be according to the Road Traffic Signs Manuals but use 900Φ STOP (60km/h zone) for 3-way and 4-way stops
out of speed humps.

1.3 All signs excluding R1 series must have rounded edges

DANGER PLATE SPEEDHUMP (RIGHT)
2. ROADMARKINGS: W417
All new road markings in thermoplastic
SCALE 1:10
Colour Paint application Premix bead application Initial coefficient of retro-
rate (mm) rate (%) retro-reflective
(minicandelas/lux/m2)
WHITE 1.2 35 200
YELLOW 1.2 35 135

NOTE:

The Trafic Engineering and Operation section

must always be consulted to assist with the setting out of speed humps.

SECTION A-A:
CONSTRUCTION DETAIL OF SPEED HUMP
SCALE 1: 100 Area = 0.7m2

50/60 Km/h
Area = 0.66m² SIDE ELEVATION

DETAIL OF SPEED HUMP ROAD MARKING

SCALE 1: 20

PLAN
SECTION B-B: TEMPLATE DETAIL FOR CONSTRUCTION OF SPEED HUMP
CONSTRUCTION DETAIL OF SPEED HUMP SCALE 1: 20 SHEET LAYOUT
SCALE 1: 100
PROJECT STATUS
DESIGNED
LOCATION OF PROJECT:
AMENDMENTS CONSULTANTS DETAILS E.MALAZA
CITY OF POLOKWANE SIGNATURE:............................................................... DATE:............................... CONCEPT TENDER APPROVED FOR ASBUILT
SESHEGO ZONE 6 DRAWING DRAWING CONSTRUCTION DRAWING
DIKGATO KGOSIHADI JV CIVIC CENTRE. CNR LANDDROS MARE DRAWING CHECKED BY DRAWING
SKURWEBERG STREET T. LETSOALO PROJECT ENGINEER:
& BODENSTEIN STREETS POLOKWANE MUNICIPALITY DESCRIPTION OF PROJECT
NOORDWYK EXT.6 POLOKWANE SIGNATURE:............................................................... DATE:...............................

0699 DRAWN
MIDRAND E.MALAZA UPGRADING OF INTERNAL STREET IN
1687 P.O. BOX 111 INITIALS AND SURNAME SIGNATURE & PR NUMBER DATE

POLOKWANE CIVIL DRAUGHTING SERVICES

SESHEGO ZONE 6: INSPECTOR OF WORKS:

0700 M. NKOSI
TEL : 011 318 1698
TRAFFIC CALMING MEASURES: SIGNATURE DATE
SIGNATURE:............................................................... DATE:...............................
TEL: (015) 290 2102 REMARKS:
FAX : 011 318 1891 APPROVED BY TECHNICAL DEPARTMENT TYPICAL SPEED HUMP AND ROAD MARKINGS DETAIL ORIGINAL PAPER SIZE:
FAX: (015) 290 2106
eMAIL:dikgatoc@dikgato.co.za A1
CONTRACT No. : PROJECT No. : SCALE : DATE : DRAWING NO.
SIGNATURE:............................................................... DATE:............................... SHEET NO:

0126 N.T.S SEP-2020 0

STD02 1OF1 REVISION