Structural Plans
Structural Plans
Structural Plans
: REINFORCED CONCRETE NOTES: DESIGN/BUILD AND DEFERRED APPROVAL ITEMS AND REQUIREMENTS: GENERAL STRUCTURAL NOTES:
REVISIONS
NO. REVISION DATE
PC CORRECTIONS 09/06/17
THESE DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY AND COPYRIGHT OF RGSE INC., ALL RIGHTS RESERVED, AND SHALL NOT BE USED ON ANY OTHER WORK OR PROJECT EXCEPT BY WRITTEN AGREEMENT WITH RGSE INC. WRITTEN DIMENSIONS SHALL TAKE PRECEDENCE OVER SCALED DIMENSIONS AND SHALL BE VERIFIED ON THE JOB SITE, ANY DISCREPANCY SHALL BE BROUGHT TO THE NOTICE OF RGSE INC. PRIOR TO COMMENCEMENT OF ANY WORK.
DESIGN CRITERIA:
·
·
·
·
GENERAL NOTES
MINIMUM DIAMETERS OF BEND
MINIMUM
BAR SIZE
DIAMETER
SHEET TITLE :
TOLERANCE ON MINIMUM
TOLERANCE ON d
CONCRETE COVER
LY
N
FIRE SPRINKLER SUPPORT:
LA
N
P
O
R
K
FO
C
E
H
C
NO BUILDING & SAFETY DIVISION INSPECTIONS WILL BE PERFORMED PRIOR TO SUBMITTAL OF THE STRUCTURAL OBSERVATION REPORT FOR
THAT STAGE OF CONSTRUCTION.
STRUCTURAL OBSERVATION DOES NOT WAIVE THE REQUIREMENT FOR SPECIAL INSPECTIONS OR BUILDING & SAFETY DIVISION INSPECTIONS
AS REQUIRED IN THE BUILDING CODE.
S0.0
STRUCTURAL STEEL:
PROPERTY
PROPERTY
CLASSIFICATION
CLASSIFICATION
MECHANICAL PROPERTIES FOR DEMAND CRITICAL WELDS
CONNECTION
FASTENING SCHEDULE
FASTENING
TABLE 2304.9.1
LOCATION
BOX
TYPE
SINKER
COMMON
FRAMING LUMBER:
6d
CONNECTION
7d
8d
10d
12d
FASTENING SCHEDULE
FASTENING
16d
PENNY-WEIGHT
20d
TYPICAL NAIL DIMENSIONS
TABLE 2304.9.1
30d
40d
LOCATION
50d
60d
MASONRY:
THESE DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY AND COPYRIGHT OF RGSE INC., ALL RIGHTS RESERVED, AND SHALL NOT BE USED ON ANY OTHER WORK OR PROJECT EXCEPT BY WRITTEN AGREEMENT WITH RGSE INC. WRITTEN DIMENSIONS SHALL TAKE PRECEDENCE OVER SCALED DIMENSIONS AND SHALL BE VERIFIED ON THE JOB SITE, ANY DISCREPANCY SHALL BE BROUGHT TO THE NOTICE OF RGSE INC. PRIOR TO COMMENCEMENT OF ANY WORK.
NO.
SHEET TITLE :
DATE:
DRAWN:
FO
ENGINEER:
R GENERAL NOTES
E
P
C
REVISION
K
02/14/17
LA
PC CORRECTIONS
N
O
REVISIONS
raulg@rgseinc.com
LY
09/06/17
·
·
ABBREVIATIONS
WOOD SHEAR WALL NOTES:
SYMBOLS
THESE DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY AND COPYRIGHT OF RGSE INC., ALL RIGHTS RESERVED, AND SHALL NOT BE USED ON ANY OTHER WORK OR PROJECT EXCEPT BY WRITTEN AGREEMENT WITH RGSE INC. WRITTEN DIMENSIONS SHALL TAKE PRECEDENCE OVER SCALED DIMENSIONS AND SHALL BE VERIFIED ON THE JOB SITE, ANY DISCREPANCY SHALL BE BROUGHT TO THE NOTICE OF RGSE INC. PRIOR TO COMMENCEMENT OF ANY WORK.
NO.
SHEET TITLE :
DATE:
DRAWN:
FO
ENGINEER:
R GENERAL NOTES
E
P
C
REVISION
K
02/14/17
LA
PC CORRECTIONS
N
O
REVISIONS
raulg@rgseinc.com
LY
09/06/17
REVISIONS
NO. REVISION DATE
PC CORRECTIONS 09/06/17
THESE DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY AND COPYRIGHT OF RGSE INC., ALL RIGHTS RESERVED, AND SHALL NOT BE USED ON ANY OTHER WORK OR PROJECT EXCEPT BY WRITTEN AGREEMENT WITH RGSE INC. WRITTEN DIMENSIONS SHALL TAKE PRECEDENCE OVER SCALED DIMENSIONS AND SHALL BE VERIFIED ON THE JOB SITE, ANY DISCREPANCY SHALL BE BROUGHT TO THE NOTICE OF RGSE INC. PRIOR TO COMMENCEMENT OF ANY WORK.
TYP. FLR. OR ROOF OPENING PLAN SCALE: 1"=1'-0" 10 REINFORCING DETAIL SCALE: 1"=1'-0" 7 FLOOR & ROOF SHTG. DETAIL SCALE: 1"=1'-0" 1
SHEET TITLE :
JOB NO:
16307
DRAWN:
raulg@rgseinc.com
CAST-IN-PLACE ANCHOR BOLT MIN. ENGINEER:
DISTANCES sokheanc@rgseinc.com
DATE:
02/14/17
STAMP:
LY
N
LA
N
P
O
R
K
FO
C
E
H
C
ENGINEERED & SOLID LUMBER ALLOWABLE NOTCHING SCALE: 1"=1'-0" 12 ANCHOR BOLTS SCALE: 1"=1'-0" 9 SILL PLATE CONN. TO CONCRETE SCALE: 1"=1'-0" 6 TRENCHING DETAIL SCALE: 1"=1'-0" 3 S0.3
MARK
'N' (NUMBER)
9
8
TYP. WOOD STUD WALL
6 SCALE: 1"=1'-0"
TRIMMER SCHEDULE
HEADER SCHEDULE
3
2
1
THESE DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY AND COPYRIGHT OF RGSE INC., ALL RIGHTS RESERVED, AND SHALL NOT BE USED ON ANY OTHER WORK OR PROJECT EXCEPT BY WRITTEN AGREEMENT WITH RGSE INC. WRITTEN DIMENSIONS SHALL TAKE PRECEDENCE OVER SCALED DIMENSIONS AND SHALL BE VERIFIED ON THE JOB SITE, ANY DISCREPANCY SHALL BE BROUGHT TO THE NOTICE OF RGSE INC. PRIOR TO COMMENCEMENT OF ANY WORK.
NO.
SHEET TITLE :
DATE:
DRAWN:
FO
ENGINEER:
R TYPICAL DETAILS
E
P
C
REVISION
K
02/14/17
LA
PC CORRECTIONS
N
O
REVISIONS
raulg@rgseinc.com
LY
09/06/17
SLAB JOINTS
COLUMN NAILER
SCALE: 1"=1'-0"
SCALE: 1"=1'-0"
9 SCALE: 1"=1'-0"
(N) TO (E)
ANCHOR BOLT SCHEDULE
5 SCALE: 1"=1'-0"
HOLDOWN DETAIL
ANCHOR BOLT SCHEDULE
SCALE: 1"=1'-0"
SCALE: 1"=1'-0"
3
2
THESE DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY AND COPYRIGHT OF RGSE INC., ALL RIGHTS RESERVED, AND SHALL NOT BE USED ON ANY OTHER WORK OR PROJECT EXCEPT BY WRITTEN AGREEMENT WITH RGSE INC. WRITTEN DIMENSIONS SHALL TAKE PRECEDENCE OVER SCALED DIMENSIONS AND SHALL BE VERIFIED ON THE JOB SITE, ANY DISCREPANCY SHALL BE BROUGHT TO THE NOTICE OF RGSE INC. PRIOR TO COMMENCEMENT OF ANY WORK.
NO.
SHEET TITLE :
DATE:
DRAWN:
FO
ENGINEER:
R TYPICAL DETAILS
E
P
C
REVISION
K
02/14/17
LA
PC CORRECTIONS
N
O
REVISIONS
raulg@rgseinc.com
LY
09/06/17
-
POLE FTG.
SCALE: 1"=1'-0"
SCALE: 1"=1'-0"
12 -
TYPICAL CMU REINF.
SCALE: 1"=1'-0"
SCALE: 1"=1'-0"
9
8
-
HEAVY DUTY CEILING DETAIL
SCALE: 1"=1'-0"
SCALE: 1"=1'-0"
SCALE: 1"=1'-0"
6
5
4
BEAM NAILER
TYP. ANCHOR BOLTS IN MASONRY WALL
TYPICAL MASONRY WALL DETAIL
SCALE: 1"=1'-0"
SCALE: 1"=1'-0"
SCALE: 1"=1'-0"
3
2
1
THESE DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY AND COPYRIGHT OF RGSE INC., ALL RIGHTS RESERVED, AND SHALL NOT BE USED ON ANY OTHER WORK OR PROJECT EXCEPT BY WRITTEN AGREEMENT WITH RGSE INC. WRITTEN DIMENSIONS SHALL TAKE PRECEDENCE OVER SCALED DIMENSIONS AND SHALL BE VERIFIED ON THE JOB SITE, ANY DISCREPANCY SHALL BE BROUGHT TO THE NOTICE OF RGSE INC. PRIOR TO COMMENCEMENT OF ANY WORK.
NO.
SHEET TITLE :
DATE:
DRAWN:
FO
ENGINEER:
R TYPICAL DETAILS
E
P
C
REVISION
K
02/14/17
LA
PC CORRECTIONS
N
O
REVISIONS
raulg@rgseinc.com
LY
09/06/17
1
1.1
1.2
1.7
1.5
1.3
1.4
1.6
20'-0" 10'-10 3/4" 10'-11" 5'-7 5/16" 18'-5 11/16" 18'-0 3/16"
A
A
18'-8 15/16"
18'-8 15/16"
B
B
43'-10 7/16"
11'-7"
12'-4 9/16"
C
C
13'-6 1/2"
13'-6 1/2"
D
D
7'-3 5/16"
F
F
SCALE: 3/16"=1'-0"
129'-0"
27'-8"
30'-0"
G
G
H
H
30'-0"
19'-9 3/4"
I
I
8'-10 1/2"
J
J
20'-0"
LEGEND
29'-0"
1
1.1
1.2
1.7
1.5
1.3
1.4
1.6
THESE DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY AND COPYRIGHT OF RGSE INC., ALL RIGHTS RESERVED, AND SHALL NOT BE USED ON ANY OTHER WORK OR PROJECT EXCEPT BY WRITTEN AGREEMENT WITH RGSE INC. WRITTEN DIMENSIONS SHALL TAKE PRECEDENCE OVER SCALED DIMENSIONS AND SHALL BE VERIFIED ON THE JOB SITE, ANY DISCREPANCY SHALL BE BROUGHT TO THE NOTICE OF RGSE INC. PRIOR TO COMMENCEMENT OF ANY WORK.
NO.
SHEET TITLE :
DATE:
DRAWN:
FO
ENGINEER:
R FAMILY LEARNING
E
P
C
REVISION
K
02/14/17
LA
PC CORRECTIONS
N CENTER -
O
REVISIONS
raulg@rgseinc.com
LY
09/06/17
1
1.1
1.2
1.7
1.5
1.3
1.4
1.6
A
A
B
B
106.6863
C
C
D
D
F
F
SCALE: 3/16"=1'-0"
SHEET S1.4.
FOR ALL PLAN NOTES SEE
G
G
I
I
J
J
1.1
1.2
1.7
1.5
1.3
1.4
1.6
THESE DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY AND COPYRIGHT OF RGSE INC., ALL RIGHTS RESERVED, AND SHALL NOT BE USED ON ANY OTHER WORK OR PROJECT EXCEPT BY WRITTEN AGREEMENT WITH RGSE INC. WRITTEN DIMENSIONS SHALL TAKE PRECEDENCE OVER SCALED DIMENSIONS AND SHALL BE VERIFIED ON THE JOB SITE, ANY DISCREPANCY SHALL BE BROUGHT TO THE NOTICE OF RGSE INC. PRIOR TO COMMENCEMENT OF ANY WORK.
NO.
SHEET TITLE :
DATE:
DRAWN:
FO
ENGINEER:
R FAMILY LEARNING
E
P
C
REVISION
K
02/14/17
LA
PC CORRECTIONS
N CENTER - 2ND
O
REVISIONS
raulg@rgseinc.com
LY
09/06/17
1
1.1
1.2
1.7
1.5
1.3
1.4
1.6
A
A
B
B
C
C
D
D
F
F
SCALE: 3/16"=1'-0"
SHEET S1.4.
FOR ALL PLAN NOTES SEE
G
G
I
I
J
J
SCALE: 3/16"=1'-0"
HIGH ROOF FRAMING PLAN
1
1.1
1.2
1.7
1.5
1.3
1.4
1.6
THESE DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY AND COPYRIGHT OF RGSE INC., ALL RIGHTS RESERVED, AND SHALL NOT BE USED ON ANY OTHER WORK OR PROJECT EXCEPT BY WRITTEN AGREEMENT WITH RGSE INC. WRITTEN DIMENSIONS SHALL TAKE PRECEDENCE OVER SCALED DIMENSIONS AND SHALL BE VERIFIED ON THE JOB SITE, ANY DISCREPANCY SHALL BE BROUGHT TO THE NOTICE OF RGSE INC. PRIOR TO COMMENCEMENT OF ANY WORK.
NO.
SHEET TITLE :
DATE:
DRAWN:
FO
ENGINEER:
R FAMILY LEARNING
E
P
C
REVISION
K
02/14/17
LA
PC CORRECTIONS
N CENTER - ROOF
O
REVISIONS
raulg@rgseinc.com
LY
09/06/17
FOUNDATION NOTES:
A B C D E F G
REVISIONS
NO. REVISION DATE
9'-0" 17'-6" 19'-0" 12'-9" 23'-9"
PC CORRECTIONS 09/06/17
5"
16
'-0
"
1
THESE DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY AND COPYRIGHT OF RGSE INC., ALL RIGHTS RESERVED, AND SHALL NOT BE USED ON ANY OTHER WORK OR PROJECT EXCEPT BY WRITTEN AGREEMENT WITH RGSE INC. WRITTEN DIMENSIONS SHALL TAKE PRECEDENCE OVER SCALED DIMENSIONS AND SHALL BE VERIFIED ON THE JOB SITE, ANY DISCREPANCY SHALL BE BROUGHT TO THE NOTICE OF RGSE INC. PRIOR TO COMMENCEMENT OF ANY WORK.
"
'-0
18
9'-0"
16
'-0
"
2
5"
23'-9"
45'-9"
18'-6"
FOUNDATION PLAN
SANCTUARY -
HOLDOWN SCHEDULE
5 COLA MIN. WOOD
FOUNDATION
ALLOW. HOLDOWN POST BOLT PER DETAIL @ DETAIL @ (E)
MARK ICC ESR # ALLOW. LARR # MEMBER
LOAD SIZE FASTENERS SCHED ON FOUNDATION CONC. FTG.
LOAD THICKNESS
DETAIL
SHEET TITLE :
10'-6"
6
9'-0"
9'-0"
JOB NO:
16307
4'-6"
DRAWN:
raulg@rgseinc.com
7 ENGINEER:
sokheanc@rgseinc.com
DATE:
02/14/17
48" MIN
STAMP:
9'-0" 36'-6" 36'-6" 9'-0"
LY
N
91'-0"
LA
COLUMN SCHEDULE N
P
SANCTUARY - FOUNDATION PLAN 7'-0" O
R
N MARK COLUMN SIZE BASE PLATE SIZE ANCHOR BOLTS
BOLT
REMARKS K
FO
FOOTING SCHEDULE (2000 PSF ALLOW. BRNG.)
SCALE: 3/16"=1'-0" LAYOUT
C
E
ALLOW. ALLOW. ALLOW. H
MARK FOOTING SIZE THICKNESS REINFORCEMENT
LOAD X 1.33 UPLIFT C
WALL LEGEND:
S1.3
7
6
5
4
3
2
1
A
B
C
DS
SCALE: 3/16"=1'-0"
D
E
SCALE: 3/16"=1'-0"
FRAMING NOTES:
WALL LEGEND:
HIGH ROOF FRAMING PLAN
THESE DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY AND COPYRIGHT OF RGSE INC., ALL RIGHTS RESERVED, AND SHALL NOT BE USED ON ANY OTHER WORK OR PROJECT EXCEPT BY WRITTEN AGREEMENT WITH RGSE INC. WRITTEN DIMENSIONS SHALL TAKE PRECEDENCE OVER SCALED DIMENSIONS AND SHALL BE VERIFIED ON THE JOB SITE, ANY DISCREPANCY SHALL BE BROUGHT TO THE NOTICE OF RGSE INC. PRIOR TO COMMENCEMENT OF ANY WORK.
NO.
SHEET TITLE :
DATE:
DRAWN:
FO
ENGINEER:
R SANCTUARY - ROOF
E
P
C
REVISION
K
02/14/17
LA
PC CORRECTIONS
N FRAMING PLAN
O
REVISIONS
raulg@rgseinc.com
LY
09/06/17
REVISIONS
NO. REVISION DATE
PC CORRECTIONS 09/06/17
THESE DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY AND COPYRIGHT OF RGSE INC., ALL RIGHTS RESERVED, AND SHALL NOT BE USED ON ANY OTHER WORK OR PROJECT EXCEPT BY WRITTEN AGREEMENT WITH RGSE INC. WRITTEN DIMENSIONS SHALL TAKE PRECEDENCE OVER SCALED DIMENSIONS AND SHALL BE VERIFIED ON THE JOB SITE, ANY DISCREPANCY SHALL BE BROUGHT TO THE NOTICE OF RGSE INC. PRIOR TO COMMENCEMENT OF ANY WORK.
RAMP SECTION SCALE: 1"=1'-0" 1
SECTION AT SLAB STEP SCALE: 1"=1'-0" 10 ELEVATOR WALL SCALE: 1"=1'-0" 7 SECTION AT OPNG. SCALE: 1"=1'-0" 4
FOUNDATION
SECTION AT DBL. WALL SCALE: 1"=1'-0" 11 INTERIOR SECTION SCALE: 1"=1'-0" 5 POLE FTG. SCALE: 1"=1'-0" 2
DETAILS
SHEET TITLE :
JOB NO:
16307
DRAWN:
raulg@rgseinc.com
ENGINEER:
sokheanc@rgseinc.com
DATE:
02/14/17
STAMP:
LY
N
LA
N
P
O
R
K
FO
C
E
H
C
SECTION AT SLAB STEP SCALE: 1"=1'-0" 12 SETION AT ELEV. PIT SCALE: 1"=1'-0" 9 STL. COLUMN FTG. SCALE: 1"=1'-0" 6 EXTERIOR FOOTING SECTION SCALE: 1"=1'-0" 3 S2.0
STRUT DETAIL
SCALE: 1"=1'-0"
SCALE: 1"=1'-0"
11 K.P. DETAIL
B
12 SECTION @ BM.
A
SCALE: 1"=1'-0"
SCALE: 1"=1'-0"
9
7
A
B
SECTION AT POST
SCALE: 1"=1'-0"
SCALE: 1"=1'-0"
SCALE: 1"=1'-0"
6
5
4
EAVE SECTION
EAVE SECTION
RIDGE SECTION
SCALE: 1"=1'-0"
SCALE: 1"=1'-0"
SCALE: 1"=1'-0"
3
2
1
THESE DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY AND COPYRIGHT OF RGSE INC., ALL RIGHTS RESERVED, AND SHALL NOT BE USED ON ANY OTHER WORK OR PROJECT EXCEPT BY WRITTEN AGREEMENT WITH RGSE INC. WRITTEN DIMENSIONS SHALL TAKE PRECEDENCE OVER SCALED DIMENSIONS AND SHALL BE VERIFIED ON THE JOB SITE, ANY DISCREPANCY SHALL BE BROUGHT TO THE NOTICE OF RGSE INC. PRIOR TO COMMENCEMENT OF ANY WORK.
NO.
SHEET TITLE :
DATE:
DRAWN:
FO
ENGINEER:
R FRAMING DETAILS
E
P
C
REVISION
K
02/14/17
LA
PC CORRECTIONS
N
O
REVISIONS
raulg@rgseinc.com
LY
09/06/17
COLUMN AT BEAM
LOW ROOF SECTION
12 PARAPET SECTION
10 PARAPET SECTION
11 SECTION AT LEDGER
SCALE: 1"=1'-0"
SCALE: 1"=1'-0"
9
7
SECTION AT LEDGER
SECTION AT PARAPET
SCALE: 1"=1'-0"
SCALE: 1"=1'-0"
SCALE: 1"=1'-0"
6
5
4
RAKE DETAIL
SECTION AT WALL
SECTION AT LOW ROOF
SCALE: 1"=1'-0"
SCALE: 1"=1'-0"
SCALE: 1"=1'-0"
3
2
1
THESE DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY AND COPYRIGHT OF RGSE INC., ALL RIGHTS RESERVED, AND SHALL NOT BE USED ON ANY OTHER WORK OR PROJECT EXCEPT BY WRITTEN AGREEMENT WITH RGSE INC. WRITTEN DIMENSIONS SHALL TAKE PRECEDENCE OVER SCALED DIMENSIONS AND SHALL BE VERIFIED ON THE JOB SITE, ANY DISCREPANCY SHALL BE BROUGHT TO THE NOTICE OF RGSE INC. PRIOR TO COMMENCEMENT OF ANY WORK.
NO.
SHEET TITLE :
DATE:
DRAWN:
FO
ENGINEER:
R FRAMING DETAILS
E
P
C
REVISION
K
02/14/17
LA
PC CORRECTIONS
N
O
REVISIONS
raulg@rgseinc.com
LY
09/06/17
REVISIONS
NO. REVISION DATE
WEB TUBE & WELD SCHEDULE
PC CORRECTIONS 09/06/17
MARK MEMBER SIZE 't' (in.) 'L' (in.)
THESE DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY AND COPYRIGHT OF RGSE INC., ALL RIGHTS RESERVED, AND SHALL NOT BE USED ON ANY OTHER WORK OR PROJECT EXCEPT BY WRITTEN AGREEMENT WITH RGSE INC. WRITTEN DIMENSIONS SHALL TAKE PRECEDENCE OVER SCALED DIMENSIONS AND SHALL BE VERIFIED ON THE JOB SITE, ANY DISCREPANCY SHALL BE BROUGHT TO THE NOTICE OF RGSE INC. PRIOR TO COMMENCEMENT OF ANY WORK.
TRUSS ELEVATION SCALE: 1/4"=1'-0" 4 TRUSS DETAIL SCALE: 1"=1'-0" 1
SHEET TITLE :
SIMPLE BEAM CONNECTION SCHEDULE SHEAR
PLATE CONNECTION BEAM TO CMU A.B. SCHEDULE
NO. OF 1 " DIA. ALLOW.
MARK
HEADED A.B. LOAD
JOB NO:
16307
DRAWN:
raulg@rgseinc.com
ENGINEER:
sokheanc@rgseinc.com
DATE:
02/14/17
STAMP:
LY
N
LA
N
P
O
R
K
FO
C
E
H
C
STL. BEAM TO CMU SCALE: 1"=1'-0" 9 SECTION AT WALL SCALE: 1"=1'-0" 6 CONN. AT WALL SCALE: 1"=1'-0" 3 S3.2
-
SECTION AT WALL
TYPICAL DOUBLE SLAB SECTION
SCALE: 1"=1'-0"
SCALE: 1"=1'-0"
12 SECTION AT WALL
11 SECTION AT (E) WALL
SCALE: 1"=1'-0"
SCALE: 1"=1'-0"
SCALE: 1"=1'-0"
9
8
7
BEAM CONN.
SECTION AT WALL
SECTION AT PARTITION WALL
SCALE: 1"=1'-0"
SCALE: 1"=1'-0"
SCALE: 1"=1'-0"
6
5
4
SECTION AT WALL
3
2
1
THESE DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY AND COPYRIGHT OF RGSE INC., ALL RIGHTS RESERVED, AND SHALL NOT BE USED ON ANY OTHER WORK OR PROJECT EXCEPT BY WRITTEN AGREEMENT WITH RGSE INC. WRITTEN DIMENSIONS SHALL TAKE PRECEDENCE OVER SCALED DIMENSIONS AND SHALL BE VERIFIED ON THE JOB SITE, ANY DISCREPANCY SHALL BE BROUGHT TO THE NOTICE OF RGSE INC. PRIOR TO COMMENCEMENT OF ANY WORK.
NO.
SHEET TITLE :
DATE:
DRAWN:
FO
ENGINEER:
R STRUCTURAL
E
P
C
REVISION
K
02/14/17
LA
PC CORRECTIONS
N DETAILS
O
REVISIONS
raulg@rgseinc.com
LY
09/06/17