Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 32 views

    GFK0682E

    Uploaded by

    sabasthian

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    GFK0682E

    Uploaded by

    sabasthian
    32 views2 pages

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    32 views2 pages

    GFK0682E

    Uploaded by

    sabasthian

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 2

    Programmable Controller

    IC690ACC901
    GFK-0682E Mini Converter Kit
    December 2003
    The Mini Converter Kit consists of an RS-422 (SNP) The Converter Plug is required to convert the 9-pin
    to RS-232 Mini Converter integrated into a 6 foot (2 serial port connector on the Mini Converter to the
    meter) serial extension cable, and a 9-pin to 25-pin 25-pin serial port connector on an IC647 computer,
    Converter Plug assembly. The 15-pin SNP port an IBM® PC-XT, or a PS/2® Personal Computer.
    connector on the Mini Converter plugs directly into The IC640 industrial computer requires an additional
    the serial port connector on the programmable adapter (not supplied – please contact your local
    controller. The 9-pin RS-232 port connector on the PLC distributor) for use with the Mini Converter.
    Mini Converter cable connects to an RS-232 Tables 1 and 2 list the Mini Converter pinouts. The
    compatible device. direction of signal flow is with respect to the
    Two LEDs on the Mini Converter indicate activity on Mini Converter.
    the transmit and receive lines.

    Figure 1. RS-422 (SNP) to RS-232 Mini Converter


    Table 1. Mini Converter RS-422 Port Table 2. Mini Converter RS-232 Port
    Pin Signal Name Direction Pin Signal Name Direction
    1 SHLD – Shield n/a 2 SD - Send Data Output
    5 +5 VDC – Power Input 3 RD - Receive Data Input
    6 CTS(A') – Clear To Send Input 5 GND - Ground n/a
    7 GND – Ground n/a 7 CTS - Clear To Send Input
    8 RTS(B) – Request To Send Output 8 RTS - Request To Send Output
    9 RT – Receive Termination Output
    10 SD(A) – Send Data Output
    Note: This datasheet applies to IC690ACC901
    11 SD(B) – Send Data Output
    versions C or later.
    12 RD(A') – Receive Data Input
    13 RD(B') – Receive Data Input
    14 CTS(B') Clear To Send Input
    15 RTS(A) – Request To Send Output
    2 Mini Converter Kit
    GFK-0682E

    Pin Pin
    System Configurations TXD 2 2 RXD
    RXD 3 3 TXD
    The Mini Converter can be used in a point-to-point CTS 7 7 RTS
    configuration as described above, or in a multidrop RTS 8 8 CTS
    configuration with the host device configured as the GND 5 5 GND
    1 DCD
    master and one or more programmable controllers 6 DSR
    configured as slaves. 4 DTR

    The multidrop configuration requires a straight- Mini Converter IBM PC-AT


    through (1-to-1) cable from the Mini Converter’s RS-232 Port 9-Pin Connector
    9-Pin Connector
    RS-422 port to the first slave PLC’s SNP port. Other
    slaves will require a daisy chain connection between Figure 2. Mini Converter to PC-AT
    slaves. A maximum of eight devices can be
    Pin Pin
    connected in an RS-422 multidrop configuration.
    TXD 2 3 RXD
    All of the devices must have a common ground. If RXD 3 2 TXD
    CTS 7 RTS
    ground isolation is required, you can use the RTS 8
    4
    5 CTS
    Isolated Repeater/Converter (IC655CCM590) in GND 5 7 GND
    8 DCD
    place of the Mini Converter. 6 DSR
    20
    When using the Mini Converter with a modem DTR

    connection, it may be necessary to jumper RTS to Mini Converter IBM PC–XT, PS/2
    RS-232 Port 25-Pin Connector
    CTS (consult the user’s manual for your modem). 9-Pin Connector

    Cable Diagrams (Point-To-Point) Figure 3. Mini Converter with Converter Plug to IC647
    When connecting the Mini Converter to IBM PC and computer, PC-XT, PS/2
    compatible computers with hardware handshaking, Pin Pin

    the following cable connections should be used. TXD 2 3 RXD


    RXD 3 2 TXD
    CTS 7 4 RTS
    RTS 8 5 CTS
    GND 5 7 GND

    Mini Converter IC640 Computer


    RS-232 Port 9-Pin Connector
    9-Pin Connector

    Figure 4. Mini Converter to 9-Pin IC640 Computer or PC-XT


    Computer (Additional Adapter Required)

    Table 3. Mini Converter Specifications


    Mechanical
    RS-422 15-pin D shell male for direct mounting to serial port on the programmable controller
    RS-232 9-pin D shell female for connection to RS-232 serial port of an IC647 industrial
    computer or Personal Computer.
    Electrical and General
    Voltage Supply +5 VDC (supplied by PLC power supply)
    Typical Current 100 mA
    Operating Temperature 0° to 70°C (32° to 158°F)
    Baud Rate 38.4K Baud maximum
    Conformance EIA-422 (Balanced Line) or EIA-423 (Unbalanced Line)
    Ground Isolation Not provided

    You might also like