Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 141 views

    Amendment No. 1 November 2019 TO Is 16715: 2018 Ultrafine Ground Granulated Blast Furnace Slag - Specification

    Uploaded by

    divith

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Amendment No. 1 November 2019 TO Is 16715: 2018 Ultrafine Ground Granulated Blast Furnace Slag - Specification

    Uploaded by

    divith
    141 views2 pages

    Original Title

    16715A1

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    141 views2 pages

    Amendment No. 1 November 2019 TO Is 16715: 2018 Ultrafine Ground Granulated Blast Furnace Slag - Specification

    Uploaded by

    divith

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    Free Standard provided by BIS via BSB Edge Private Limited to DK TechnoConsultant -

    Bangalore(technoconsultant22@gmail.com) 122.187.94.178 [for non-commercial use only].

    AMENDMENT NO. 1 NOVEMBER 2019

    TO

    IS 16715 : 2018 ULTRAFINE GROUND GRANULATED


    BLAST FURNACE SLAG — SPECIFICATION

    (Page 1, Table 1, Note) — Substitute the following for the existing:


    ‘NOTES
    1 For the purpose of testing of UGGBS as per IS 4032, wherever reference to cement has been
    made in IS 4032, it may be read as UGGBS.
    2 UGGBS shall satisfy any one of the two requirements given at Sl No. (viii) and (ix).
    3 CaS = 2.25 × Sulphide sulphur. Sulphide sulphur in GGBS may be estimated as per the
    method specified in IS 4032, assuming total sulphide sulphur exists as CaS.’

    (Page 2, Table 2) — Substitute the following for the existing table:


    Table 2 Physical Requirements of UGGBS
    ( Clause 6 )
    Sl No. Characteristic Requirement Method of
    Test, Ref to
    (1) (2) (3) (4)
    i) Fineness, m2/kg, Min (optional) (see Note 1) 1 500 IS 11578
    BET Method (Nitrogen adsorption)
    ii) Particle size, µm, Max (see Note 2) : Using laser
    diffraction
    a) D50 5
    PSD analyzer
    b) D95 15
    iii) Slag activity index : See Note 3
    a) 7 days Not less than 85 percent
    b) 28 days Not less than 100 percent
    NOTES
    1 By agreement between the purchaser and the manufacturer, the fineness test may be carried
    out in accordance with the method given in IS 11578.

    1
    Free Standard provided by BIS via BSB Edge Private Limited to DK TechnoConsultant -
    Bangalore(technoconsultant22@gmail.com) 122.187.94.178 [for non-commercial use only].

    2 D95 indicates that 95 percent of the particles on a mass basis are below a given size while D50
    indicates that 50 percent of the particles on a mass basis are below a given size.
    3 Slag activity index (SAI) shall be determined using blend of 50 percent UGGBS and 50
    percent control OPC 43 conforming to IS 269, having total alkalis (Na2O + 0.658 K2O) not
    less than 0.6 percent and not more than 0.9 percent. The blend shall be tested for compressive
    strength by casting and testing prisms, in accordance with IS 4031(Part 8). The mortar mix
    proportions by mass are, 1 part of the cement blend under test, 3 parts of standard sand and
    0.5 part of water.
    SAI shall be determined as:
    compressive strength of the motor cube using blend
    ×100
    compressiive strength of control OPC motor cube

    (CED 02)
    Publication Unit, BIS, New Delhi, India

    You might also like