With its experience of more than 35 years in producing and selling transformers,

ASTOR is an innovative and leading company in the electromechanical

manufacturing industry and represents Turkey successfully all around the world. Our
company aims to provide a contribution to the sector by transferring our experience,
production and quality understanding in the production of Medium-Voltage
Switchgears and Compact Transformer Substations. ASTOR has started to
manufacture and sell Medium-Voltage Switchgears and Compact Transformer
Substations by getting required certifications as a result of R&D studies.

With an indoor area of 100 acres equipped with the state-of-the-art technology and
outdoor area of 31 acres in the 2nd Organized Industrial Zone in Ankara, our new
factory with its completed facilities got started in 2016 and it has been going on the
production and sales of Medium-Voltage Switchgears and Compact Transformer
Substations at full pelt. Our primary goal is to improve our product range, which we
started with the production of SF6 Gas Insulated Disconnector and Load Breakers,
Metal-Enclosed Modular Cells and Monobloc Concrete Kiosks, with other product
groups by the help of R&D studies and to offer them to our customers.

Our main goal is to provide our customers with the high-quality products by following
up the latest technological developments, to improve our production capacity, and to
maximize customer satisfaction with the quality of our after-sales service.

ASTOR, which has all the required quality certifications, has the awareness of the
fact that its products are used everywhere with the electricity and continues its
production with this understanding. Our technical and administrative staff which is
composed of specialists, who are open to development and who cares quality, makes
a very great effort to achieve the target of R&D focused growth.

Available Indoor Area: 100.000 m2

Available Outdoor Area: 31.000 m2

Products:
Air Insulated Modular Cell
24-36kV 630-1250A SF6 Gas Insulated Disconnector/Load Breaker
24-36kV 630-1250A SF6 Gas Insulated Load Breaker with Side Mechanism
Concrete Transformer Substations
Sheet Metal-Enclosed Transformer Substations

astoras.com.tr
astoras.com.tr

AS36 SERIES
AIR INSULATED METAL
ENCLOSED MODULAR
SWITCHGEARS
GENERAL
ASTOR brand Air Insulated Metal-Enclosed Modular Cells are a set of switching and control devices which have
been designed in accordance with TS EN 62271-200 (IEC 62271-200) standard for use in medium voltage
distribution systems up to 36 kV. All type tests required by the standard have been completed in accredited
laboratories in Turkey and abroad.

Various types of switchgear designs are available with the functional features required for MV distribution systems.

STRUCTURAL ADVANTAGES

• Suitable for remote monitoring and control systems

• Safe disconnection and break operations with ASTOR brand SF6 Gas Insulated Switch Disconnector, SF6 Gas
Insulated Disconnector, and SF6 Gas Insulated Breaker
• Convenient and safe usage in compact dimensions in MV Distribution Transformer Substations (Monobloc
Concrete Transformer Substations, Monobloc Metal-Enclosed Transformer Substations)
• With its modular structure, it can be expanded to the right or left, can be easily assembled and disassembled.
• Mechanical locks designed against improper on/off operations
DESIGN AND STRUCTURAL PROPERTIES
CONTAINERS
Galvanized sheet metal of 2 mm thickness is used on all outer surfaces of ASTOR brand Air Insulated Metal-
Enclosed Cells. The covers and doors on the front side of the enclosure and the front panels of the operating
mechanism are painted by using electrostatic powder paint. The enclosure has a protection rating of IP3X against
the people approaching the parts with voltage and touching the moving parts.

DOORS AND COVERS

The circuit breakers, current and voltage transformers, and the compartments hosting the fuses in the ASTOR
switchgears can be accessed through the OPENING doors and covers. The FIXED covers cannot be opened
without using any tools and they have a "DANGER" warning sign on them.
AS36 Series
AIR INSULATED METAL ENCLOSED MODULAR SWITCHGEARS

OBSERVATION WINDOWS
The ON and OFF positions of the disconnector and earthing disconnector in the accessible section of the
switchgear can be seen through the observation windows on the covers in this section.

LOCKING MECHANISMS

Locking Mechanism in the Disconnector Cells

• The Disconnector can be switched off when the Earthing Disconnector is switched on and the switchgear’s
access cover is closed.
• The Earthing Disconnector can be switched off when the Disconnector is switched on.

Locking Mechanism in the Breaker Cells

• The Disconnector can be switched off when the Earthing Disconnector is switched on, the Breaker is
switched on and the switchgear’s access cover is closed.
• The Earthing Disconnector can be switched off when the Disconnector is switched on.
• The Breaker can be switched off when the Disconnector is switched on, the Earthing Disconnector is
switched on, the Breaker is switched on and the switchgear’s access cover is closed.
 MAIN
BUSBAR
SECTION
LV SECTION

OPERATING
MECHANISM
SECTION

BREAKER’S
OPERATING
MECHANISM
SECTION

CABLE
CONNECTION
SECTION
AS36 Series
AIR INSULATED METAL ENCLOSED MODULAR SWITCHGEARS

SECTIONS OF THE SWITCHGEARS

MAIN BUSBAR SECTION
It is located at the top of the switchgear. The main busbar terminals of the switchgears that are assembled
next to each other modularly are combined with copper or aluminum busbar to form the main busbar.
Access to the main busbar section is only possible by removing the cover that has a warning sign on it.

CABLE CONNECTION SECTION

It is located at the bottom of the switchgear. The incoming and outgoing medium voltage cables/busbars
to/from the switchgear are connected to the switchgear in this section. The cover of this section can only
be opened without using any tool after all the conductors entering the section are discharged, short-
circuited, and earthed.

The components in the cable connection section depending on the switchgear's functional characteristics,
• Breaker
• MV fuses
• Earthing disconnectors
• Measurement transformers

LOW VOLTAGE (LV) SECTION

This section is located on the upper front side of the switchgear. This section can be accessed when the
system is under voltage.

The components in the low voltage section depending on the switchgear's functional characteristics,
• Protection relays
• Measurement tools
• Counters
• Auxiliary relays, LV fuses, terminal arrays and other low voltage control devices and switchgears

OPERATING MECHANISM SECTION

It is located under the LV Section in the switchgear. The section, which hosts the disconnector, gas
insulated disconnector, and the operating mechanisms of the earthing, has a metal enclosure with the
protection rating of IP3X. The operating mechanism of the switchgears with a breaker is located on the
breaker. The operating mechanism can be accessed while the system is under voltage.

The section includes the following hardware in accordance with the single line diagram on the control and
display panel on the front side of the operating mechanisms;
• Mimic diagram
• Position indicators of the disconnector, switch disconnector, and earthing disconnectors
• Control lever sockets to be controlled for disconnector, and the earthing disconnectors
• "Spring adjusted" and "Spring Free" symbols
• Switch disconnector on/off buttons
• Voltage indicator and phase sequence control jack
• Operating instructions
• Sign plate
MV FUSE SELECTION
CONSIDERATIONS IN THE FUSE SELECTION
• The rated voltage of the fuse must be equal to or greater than the rated voltage of the system.
• The proper fuse must be selected in accordance with the characteristics of the fuse manufacturer. The
fuses to be used in the ASTOR brand Transformer Protection Cells with Switch Disconnector and Fuses
must have strike pins (medium type) in accordance with TS EN 60282-1 standard.
RATED VOLTAGE OF THE TRANSFORMER (36 kV)
FUSE SELECTION GUIDE
EFO İNTERTEKNİK
RATED VOLTAGE OF THE
Uk % RATED CURRENT OF THE FUSE (A)
TRANSFORMER (kVA)

25 4.5 2 2

50 4.5 4 4

100 4.5 6 6.3

160 4.5 10 10

200 4.5 10 10

250 4.5 10 16

400 4.5 16 16

630 4.5 20 31.5

800 6 25 40

1000 6 25 40

1250 6 40 50

1600 6 50 63

HOW TO REPLACE A FUSE

• The cover of the Cable Connection Section in which the MV
fuses are placed can be opened after switching on the Switch
Disconnector and both sides of the medium voltage fuses are
earthed.
• The MV fuses must be placed into the socket ensuring that the
strike pin side is above (in the direction of the arrow).
• It is recommended to replace also the fuses in the other phases
in case of one or two blowing (melting) fuses in a switchgear
with Switch Disconnector and Fuse in accordance with the
Article 8.103 of the TS EN 62271-105 standard.
AS36 Series
AIR INSULATED METAL ENCLOSED MODULAR SWITCHGEARS

STANDARD AND OPTIONAL EQUIPMENT

CURRENT & VOLTAGE TRANSFORMERS

Two different types of current transformers are used in
ASTOR brand switchgears i.e. the toroidal type and the
support type. Various types of current and voltage
transformers can be used in line with the customer desire and
the project requirements.

DIGITAL PROTECTION AND CONTROL RELAYS

Various types of relays, with protection, measurement, and control features can
be used in line with the customer desire and the project requirements. The
desired values are set to the relays to be installed in the switchgear before they
are shipped.

FAILURE INDICATOR DEVICE

The Failure Indicator Device, which is produced by various suppliers,
displays the phase and earthing failures. The device is provided
optionally with the switchgears.

MEASUREMENT TOOLS
The measuring instruments such as the ammeter, voltmeter, electricity meter,
and the energy analyzer are selected in line with the customer desire and the
requirements of the project.

MV FUSES
High cut-off capacity MV fuses are used based on the transformer power in ASTOR brand switchgears
REMOTE CONTROL
The operations on the switchgear can be made using the remote control, which is provided together with
the ASTOR brand switchgears, up to 5 meters.
BUSBARS
The busbars, which are used in connecting the switchgears, are produced from high-conductivity-capacity
aluminum or copper which is isolated by a shrinking tube.
TECHNICAL SPECIFICATIONS
RATED VOLTAGE (kV) 36

MAIN BUSBAR’S RATED CURRENT (A) 630 ; 1250

FEEDER’S RATED CURRENT (A) 630 ; 1250*

RATED POWER-FREQUENCY WITHSTAND VOLTAGE (kV-rms)

PHASE TO PHASE AND PHASE TO NEUTRAL 70

AT ISOLATING DISTANCE 80

RATED LIGHTNING IMPULSE WITHSTAND VOLTAGE (kV-PEAK)

PHASE TO PHASE AND PHASE TO NEUTRAL 170

AT ISOLATING DISTANCE 195

RATED SHORT-DURATION POWER-FREQUENCY WITHSTAND VOLTAGE 16 kA-1 sec.

PEAK WITHSTAND CURRENT (kA-PEAK) 40

TRANSFER CURRENT (SWITCH DISCONNECTOR+FUSE 200

SWITCHGEAR) (A)
LOSS OF SERVICE CONTINUITY CATEGORY LSC 2A-PI

INTERNAL ARC WITHSTANDING 16 kA-1 sec.

INTERNAL ARC CLASSIFICATION A (FL)

PROTECTION CLASSIFICATION IP 3X

IMPLEMENTED STANDARD TS EN 62271-200

* Does not apply to switchgears with Switch Disconnectors.

AS36 Series
AIR INSULATED METAL ENCLOSED MODULAR SWITCHGEARS

INSTALLATION
PLACING THE SWITCHGEAR
The AS36 series switchgears should be
placed on a cable duct in the building, taking
into account the following measurements.

WARNING!
• The distance between the back of the
switchgear and the wall must be at
least 100 mm.

FIXING THE SWITCHGEARS TO THE GROUND

MV DEVICE- SWITCHING DEVICES
GENERAL FEATURES

SWITCHING ON SWITCHING OFF

INSULATION
OPERATION

OPERATION

OPERATION

OPERATION
UNLOADED

UNLOADED
OPERATIO

OPERATIO
FUNCTIONS

CIRCUIT

CIRCUIT
N UNDER

N UNDER
SHORT

SHORT
LOAD

LOAD
It has been designed to ensure
√ √ √ √
safe insulation of the circuit. It is
DISCONNECTOR - - -
usually associated with a ground
knife.

It has been designed to provide

EARTHING
√ √ √
safety even under power. It earths
- - - -
DISCONNECTOR the phase conductors whose
power is cut.

It is a circuit element that switches

on and off under operating
conditions including over-currents.
It has been designed to control
SWITCH
DISCONNECTOR
the on and off position of the √ √ - √ √ √ √
system. It is usually used for
disconnecting. It is mostly used
with a fuse at MV distribution
networks.

It is used for transferring,

switching on and off the rated
BREAKER current in the distribution systems, √ √ √ √ √ √ -
and cutting off the overcurrent and
short circuit currents.

SF6 GAS BREAKERS;

ASTOR brand SF6 Gas Breakers have been designed to have a sealed pressure structure that does not require
SF6 additional gas for 30 years in accordance with TS EN 62271-100 standard.

Operating Mechanism
The breaker’s operating mechanism provides an "On-Off-On" process cycle without any need for a separate
process. It operates with the energy stored in a spring mechanism, which can be set by hand or motor, and it is
suitable for controlling with a remote control system. The switching-off spring is automatically adjusted by the
electric motor and the switching-on spring is automatically adjusted when the breaker is switched off. If the off
spring is not fully adjusted, the locking system prevents the breaker’s operation.

Switching On and Off Mechanisms

Switching On and Off operations can be made remotely using the on and of coils and also it can be mechanically
switched off using the button on the front of the breaker’s operating mechanism in case of emergency.

On the operating mechanism, there is a mechanical indicator showing the on and off position of the breaker, and
a mechanical counter, counting the number of switching on operations.
AS36 Series
AIR INSULATED METAL ENCLOSED MODULAR SWITCHGEARS

TYPE ACBS36

RATED VOLTAGE (kV) 36

ISOLATION VOLTAGE (kV) 70 (active-1 min.)

LIGHTNING IMPULSE WITHSTAND VOLTAGE (kV) 170 (peak-1.2-50μs)

RATED CURRENT (A) 630

RATED FREQUENCY (Hz) 50

SHORT CIRCUIT CURRENT (kA) 16

PEAK WITHSTAND CURRENT (kA) 40

SHORT CIRCUIT DURATION 3 sec.

OPERATING CYCLE A-0.3 sec.-KA-3 min.-KA

GAS SEALING TYPE Sealed pressure

CATEGORY E2, C2, M2

SF6 GAS DISCONNECTORS;
ASTOR brand SF6 Gas Disconnectors have been designed to have a sealed pressure structure that does not
require additional SF6 gas for 30 years in accordance with TS EN 62271-102 standard.

TYPE ADS36S

RATED VOLTAGE (kV) 36

ISOLATION VOLTAGE (kV) 70 (active-1 min.)

LIGHTNING IMPULSE WITHSTAND VOLTAGE (kV) 170 (peak-1.2-50μs)

RATED CURRENT (A) 630;1250

RATED FREQUENCY (Hz) 50

SHORT CIRCUIT CURRENT (kA) 16

PEAK WITHSTAND CURRENT (kA) 40

SHORT CIRCUIT DURATION 3 sec.

GAS SEALING TYPE Sealed pressure

CATEGORY E0, M1

IMPLEMENTED STANDARD TS EN 62271-102

AS36 Series
AIR INSULATED METAL ENCLOSED MODULAR SWITCHGEARS

SF6 GAS SWITCH DISCONNECTORS;

ASTOR brand SF6 Gas Switch Disconnectors have been designed to have a sealed pressure structure that does
not require additional SF6 gas for 30 years in accordance with TS EN 62271-103 standard.

TYPE ALBS36S

RATED VOLTAGE (kV) 36

ISOLATION VOLTAGE (kV) 70 (active-1 min.)

LIGHTNING IMPULSE WITHSTAND VOLTAGE (kV) 170 (peak-1.2-50μs)

RATED CURRENT (A) 630

RATED FREQUENCY (Hz) 50

SHORT CIRCUIT CURRENT (kA) 16

PEAK WITHSTAND CURRENT (kA) 40

SHORT CIRCUIT DURATION 1 sec.

GAS SEALING TYPE Sealed pressure

CATEGORY E3, M1

IMPLEMENTED STANDARD TS EN 62271-103

EARTHING DISCONNECTORS;
Earthing disconnectors are produced with 3 poles in accordance with TS EN 62271-102 standard.

TYPE AES36S AES36F

RATED VOLTAGE (kV) 36 36

RATED SHORT-DURATION WITHSTAND CURRENT (kA) 16 1

RATED PEAK WITHSTAND CURRENT (kA) 40 2.5

RATED SHORT CIRCUIT DURATION 1 sec. 1 sec.

CATEGORY E2 E2

IMPLEMENTED STANDARD TS EN 62271-102 TS EN 62271-102

• With medium voltage
cable connection ends at • At the lower (load) side of
input/output switchgear the MV fuse in the
with the disconnector Transformer Protection Cell
USE AREAS DEPENDING ON THE SWITCHGEAR TYPE
• With medium voltage with Switch Disconnector
cable connection ends at and Fuse
input/output switchgear
with breaker
AS36 Series
AIR INSULATED METAL ENCLOSED MODULAR SWITCHGEARS
SWITCHGEAR
TYPES

AS36 LC
INPUT OUTPUT
SWITCHGEAR WITH
SWITCH DISCONNECTOR

Un (kV) 36 kV
Width (mm) 750
Length (mm) 1400
Height (mm) 2250

AS36 VTC
VOLTAGE TRANSFORMER
SWITCHGEAR

Un (kV) 36 kV
Width (mm) 750
Length (mm) 1400
Height (mm) 2250

AS36 CBT
TRANSFORMER PROTECTION
SWITCHGEAR WITH BREAKER

Un (kV) 36 kV
Width (mm) 1000
Length (mm) 1400
Height (mm) 2250
AS36 Series
AIR INSULATED METAL ENCLOSED MODULAR SWITCHGEARS

AS36 LF
TRANSFORMER
PROTECTION
SWITCHGEAR WITH
SWITCH DISCONNECTOR
AND FUSE
Un (kV) 36 kV
Width (mm) 750
Length (mm) 1400
Height (mm) 2250

AS36 CBC
INPUT OUTPUT
SWITCHGEAR WITH
BREAKER

Un (kV) 36 kV
Width (mm) 1000
Length (mm) 1400
Height (mm) 2250

AS36 CBC-C2
COUPLING
SWITCHGEAR WITH
BREAKER (WITH
DOUBLE BREAKER)

Un (kV) 36 kV
Width (mm) 1500
Length (mm) 1400
Height (mm) 2250
AS36 LC-G
GAS INSULATED INPUT
OUTPUT SWITCHGEAR

Un (kV) 36 kV
Width (mm) 750
Length (mm) 1400
Height (mm) 2250

AS36 KB
CABLE
CONNECTION
SWITCHGEAR

Un (kV) 36 kV
Width (mm) 750
Length (mm) 1400
Height (mm) 2250

AS36 LCV
CURRENT VOLTAGE
MEASUREMENT
SWITCHGEAR WITH
SWITCH DISCONNECTOR

Un (kV) 36 kV
Width (mm) 1000
Length (mm) 1400
Height (mm) 2250
AS36 Series
AIR INSULATED METAL ENCLOSED MODULAR SWITCHGEARS

AS36 LC-Y
BUSBAR
DISCONNECTION
SWITCHGEAR WITH
SWITCH

Un (kV) 36 kV
Width (mm) 1000
Length (mm) 1400
Height (mm) 2250

AS36 CBC-OTOP
INPUT OUTPUT
SWITCHGEAR WITH
VOLTAGE TRANSFORMER

Un (kV) 36 kV
Width (mm) 1500
Length (mm) 1400
Height (mm) 2250
astoras.com.tr

ABK SERIES
CONCRETE
TRANSFORMER AND
DISTRIBUTION
SUBSTATIONS
GENERAL
ASTOR brand MV/LV Concrete Transformer and Distribution Substations have been designed with a concrete
enclosure, monobloc structure, and compact type to be used in system voltages up to 36 kV in accordance with
the TS EN 62271-202 (IEC 62271-202) standard and TEDAŞ MYD technical specifications. All type tests
required by the standard have been completed in accredited laboratories in Turkey and abroad.

Concrete Transformer and Distribution Substations consist of three parts; HV switching units, MV distribution
transformer, LV distribution panel. Each section has its own independent access doors and ventilation louvers.
Various door and ventilation louver configurations can be made depending on the requirement.

USE AREAS
• Transformer Substations
• Distribution Substations
• Industrial Substations
• Wind Power Plants (WPP), Solar Power Plants (SPP)
• Compensation Facilities
• Water Pump Stations
• Generator Cabinets

ADVANTAGES
• Suitable for displacement due to its monobloc structure
• Quick and easy installation
• Compatible with the environment in terms of view and structure
• Various color options
• Resistant to all weather conditions
• Long service life
DESIGN AND STRUCTURAL PROPERTIES
GENERAL
• The concrete enclosure of the compact substation is produced with a monobloc structure including the
tank/foundation section and the side walls except for the roof. The roof is produced separately.
• The compact substation’s roof and its enclosure with its side walls and tank/foundation section are
completely waterproof.
• Tank/foundation section is suitable for the smallest bending radius of 36 kV 10x240 mm2 cable.

TYPES
ABK-A : Compact Transformer Substations with Air Insulated Cells (1000 kVA)
ABK-B : Compact Transformer Substations with Air Insulated Cells (1600 kVA)
ABK-H : Compact Distribution Substations with Air Insulated Cells
ABK-C : Compact Transformer Substations with Air Insulated Cells without LV Panel (1000 kVA)
ABK-D : Compact Transformer Substations with Air Insulated Cells without LV Panel (1600 kVA)
ABK-T : LV Panel and Distribution Transformer Substations
ABK-R : Compact Transformer Substations with GIS
ABK Series
CONCRETE DISTRIBUTION AND TRANSFORMER SUBSTATIONS

STRUCTURAL PROPERTIES
Enclosure
• The roof of the compact substation is resistant to the load of 2500 N/m2.
• The enclosure is resistant to wind pressure of at least 34 m/s.
• The ventilation louvers and the doors are resistant to the mechanical shock (IK10) which corresponds to 20
Joules from inside and outside.
• Enclosure Classification: 10
• It has been proved that concrete transformer substations are safe against earthquake conditions.

Concrete and Steel Accessories’ Properties

• C35/45 concrete is used in accordance with the TS EN 206-1 standard.
• Concrete qualification tests are carried out periodically in accredited laboratories.
• Steel fittings in accordance with TS 708 are used.

Ventilation Louvers, Doors and Lock Systems

• Ventilation louvers and doors are produced from the galvanized sheet material painted with electrostatic
powder paint with a thickness of 2 mm.
• The doors have been designed in such a way that they can stay open with an angle of 120° and cannot
be removed from outside.
• All locks of the compact substation have been designed as mortise locks in a special structure that they
can be locked with a single key and cannot be removed from outside.

Partitions
The HV Cell Section and Transformer Section, and the Transformer Section and LV Panel Section are
separated by concrete partitions.
TECHNICAL SPECIFICATIONS

RATED VOLTAGE (kV) 36

MAXIMUM RATED POWER (kVA) 1000 ; 1600

ENCLOSURE CLASSIFICATION 10

INTERNAL ARC WITHSTANDING (AB) 16 kA-1 sec.

PROTECTION CLASSIFICATION IP 23D

IMPLEMENTED STANDARD TS EN 62271-202

ABK Series
CONCRETE DISTRIBUTION AND TRANSFORMER SUBSTATIONS

FOUNDATION CONCRETE, PREPARATION, AND ASSEMBLY

KIOSK

0.3 sand (min 30-40mm)

A-DETAIL

STEEL MESH (min Q 13)

C20 CONCRETE
C 20
CONCRETE

SIDE VIEW

A-DETAIL

A-
DETAIL

A-DETAIL C2C CONCRETE

FRONT VIEW

• Ground excavation is performed by paying attention to the sub-basement level.

• Earthing network is prepared
• The ground is graded. A reinforced concrete of C20 quality is poured on the ground at a thickness of about
150 mm.
• An intermediate layer is formed by covering the concrete surface with 0.3 mm sand with a thickness of about
2-3 cm.
• The concrete kiosk is placed on the ground prepared in accordance with the instructions on the kiosk.
• External LV and MV cables are connected. The cable input/output holes are sealed.
• The earthing network is connected to the Equipotential Earthing Bar located in the kiosk.
• Landscaping of the compact substation is completed.
TYPES AND DIMENSIONS
ABK-A COMPACT TRANSFORMER SUBSTATIONS WITH AIR INSULATED SWITCHGEARS (1000 kVA)

LV SECTION
MV SECTION TR SECTION

h=2400
h=2400 h=2400

TRANSFORMER
TYPE (MV+TR+LV) POWER a b c D E f g

ABK-A 4350 1000 kVA 1750 1700 600 2500 4350 4130 2280

ABK-A 5450 1000 kVA 2850 1700 600 2500 5450 5230 2280

ABK-A 6000 1000 kVA 3400 1700 600 2500 6000 5780 2280

ABK-A 6490 1000 kVA 3890 1700 600 2500 6490 6270 2280

ABK-A 7500 1000 kVA 4900 1700 600 2500 7500 7280 2280

ABK-B COMPACT TRANSFORMER SUBSTATIONS WITH AIR INSULATED SWITCHGEARS

(1600 kVA)
LV SECTION

h=2400

MV SECTION
TR SECTION

h=2400 h=2400 h=2400

TRANSFORMER
TYPE (MV+TR+LV) POWER a b c D E f g

ABK-B 5450 1600 kVA 2300 2250 600 2500 4350 5230 2280

ABK-B 6000 1600 kVA 2850 2250 600 2500 6000 5780 2280

ABK-B 6490 1600 kVA 3340 2250 600 2500 6490 6270 2280

ABK-B 7500 1600 kVA 4350 2250 600 2500 7500 7280 2280

• Lowercase letters show inner measurements and the uppercase letters outer measurements.
• All measurements are shown in mm.
ABK Series
CONCRETE DISTRIBUTION AND TRANSFORMER SUBSTATIONS

ABK-H COMPACT DISTRIBUTION SUBSTATIONS WITH AIR INSULATED

SWITCHGEARS

MV SECTION

h=2400 h=2400 h=2400

TRANSFORMER
TYPE (MV) POWER a b c D E f g

ABK-H 3800 - 3580 - - 2500 3800 3580 2280

ABK-H 4350 - 4130 - - 2500 4350 4130 2280

ABK-H 5450 - 5230 - - 2500 5450 5230 2280

ABK-H 6000 - 5780 - - 2500 6000 5780 2280

ABK-H 6490 - 6270 - - 2500 6490 6270 2280

ABK-H 7500 - 7280 - - 2500 7500 7280 2280

ABC-C COMPACT TRANSFORMER SUBSTATIONS WITH AIR INSULATED SWITCHGEARS WITHOUT LV PANEL
(1000 kVA)

TR SECTION
MV SECTION

h=2400 h=2400 h=2400

TRANSFORMER
TYPE (MV+TR) POWER a b c D E f g

ABK-C 5450 1000 kVA 3490 1700 - 2500 5450 5230 2280

ABK-C 6000 1000 kVA 4040 1700 - 2500 6000 5780 2280

ABK-C 6490 1000 kVA 4530 1700 - 2500 6490 6270 2280

ABK-C 7500 1000 kVA 5540 1700 - 2500 7500 7280 2280

• Lowercase letters show inner measurements and the uppercase letters outer measurements.
• All measurements are shown in mm.
ABK-D COMPACT TRANSFORMER SUBSTATIONS WITH AIR INSULATED SWITCHGEARS WITHOUT LV PANEL
(1600 kVA)

MV SECTION TR SECTION

h=2400 h=2400

TRANSFORMER
TYPE (MV+TR) POWER a b c D E f g

ABK-D 5450 1600 kVA 2940 2250 - 2500 5450 5230 2280

ABK-D 6000 1600 kVA 3490 2250 - 2500 6000 5780 2280

ABK-D 6490 1600 kVA 3980 2250 - 2500 6490 6270 2280

ABK-D 7500 1600 kVA 4990 2250 - 2500 7500 7280 2280

ABK-T LV PANEL AND DISTRIBUTION TRANSFORMER SUBSTATIONS

LV SECTION

LV SECTION

TR SECTION
h=2400
h=2400

TR SECTION

h=2400 h=2400

TRANSFORMER
TYPE (TR+LV) POWER a b c D E f g

ABK-T 2550 1000 kVA - 1740 550 2500 2550 2330 2280

ABK-T 3200 1000/1600 kVA - 2340 600 2500 3200 2980 2280

• Lowercase letters show inner measurements and the uppercase letters outer measurements.
• All measurements are shown in mm.
ABK Series
CONCRETE DISTRIBUTION AND TRANSFORMER SUBSTATIONS

ABK-R COMPACT TRANSFORMER SUBSTATIONS WITH GIS

REDRESÖR

TRANSFORMER

h=2400
POWER
h=2400

LV PANEL

1000 KVA

h=2400

TRANSFORMER
TRANSFORMER
SECTION
SECTION
AG PANO

MV+LV SECTION
AG PANO

MV+LV SECTION

h=2400 h=2400 h=2400 h=2400

TRANSFORMER
TYPE (GIS) POWER a b c D E f g

ABK-R 3800 (D)* 1000 kVA 1200 1700 600 2500 3800 3580 2280

ABK-R 4350 (I)** 1000 kVA 2390 1700 - 2500 4350 4130 2280

ABK-R 5450 (I)** 1000 kVA 3490 1700 - 2500 5450 5230 2280

ABK-R 4350 (D)* 1000 kVA 1200 1700 600 2500 4350 4130 2280

ABK-R 4800 (I)** 1000 kVA 2290 1700 - 2500 4800 4580 2280

*(D) Externally operating GIS kiosk; **(I) Internally operating GIS kiosk.
• Lowercase letters show inner measurements and the uppercase letters outer measurements.
• All measurements are shown in mm.
SOLAR POWER PLANTS
ANKARA ACAZA SOLAR POWER PLANT (1 MW)
NEVŞEHİR SOLARAN SOLAR POWER PLANT (1 MW)
ŞANLIURFA VİRANŞEHİR SOLAR POWER PLANT (12 MW)
ŞANLIURFA HİLVAN SOLAR POWER PLANT (8 MW)
ŞANLIURFA YENTEK SOLAR POWER PLANT (9 MW)
KIZILELMA SOLAR POWER PLANT (3 MW)
ŞANLIURFA BÖLÜCEK SOLAR POWER PLANT (14 MW)
ŞANLIURFABOZOVA SOLAR POWER PLANT (17 MW)
KONYA KULU SOLAR POWER PLANT (1 MW)
KONYA OVASAN SOLAR POWER PLANT (1 MW)
KÜTAHYA GÜNSER AND SİMEN SOLAR POWER PLANT (2 MW)
KONYA SAYLAM SOLAR POWER PLANT (1 MW)
ÇANKIRI KURŞUNLU SOLAR POWER PLANT (3 MW)
KONYA CİHANBEYLİ SOLAR POWER PLANT (3 MW)
ÇANKIRI MİKADO SOLAR POWER PLANT (1 MW)
YOZGAT COŞKUNLAR KAROSER SOLAR POWER PLANT (1 MW)
MALATYA SOLAR POWER PLANT ( 3 MW)
ANKARA ELMADAĞ SOLAR POWER PLANT (15 MW)
ŞANLIURFA SOLAR POWER PLANT (14 MW)
HİPOT&ARMİN UNINCORPORATED ASSOCIATION ISPARTA GÖNEN SOLAR POWER PLANT (1 MW)
HİPOT&ARMİN UNINCORPORATED ASSOCIATION SİVAS/TOKAT/ANTALYA/BURDUR SOLAR POWER PLANT (60 MW)

HOUSING, HEALTHCARE, SCHOOL, AND SOCIAL FACILITY PROJECTS

BALIKESİR BURHANİYE 100 BED CAPACITY STATE HOSPITAL
ŞEREFLİKOÇHİSAR STATE HYDRAULIC WORKS
TOKİ SAMSUN CANİK 127 HOUSING AND TRADE CENTER
DİLOVASI MAKİNA
TRAKYA ÜNİVERSITY, FACULTY OF THEOLOGY
KIRŞEHİR TİGEM DISTRIBUTION CENTER
ELAZIĞ PROVINCIAL DIRECTORATE OF SECURITY, SERVICE BUILDING
NOSAB BOX AMBALAJ TRANSFORMER SUBSTATION
ÇAMLIYAYLA DIRECTORATE OF SECURITY
GÜLNAR COACH STATION PROJECT
İSTİNYE UNIVERSITY
NİĞDE COURTHOUSE
ANKARA MÜHYE HOUSING PROJECT
KIRŞEHİR KAMAN TOKİ 988-HOUSING CONSTRUCTION WORK
KIRŞEHİR KAMAN STATE HOSPITAL
DİYARBAKIR TOKİ 800 HOUSING
CEYLANPINAR TİGEM
TOKİ 400 STUDENT CAPACITY MERSİN ERDEMLİ STUDENT DORMITORY
MARDİN ARTUKLU UNIVERSITYİ
ŞIRNAK CİZRE DİVAN OTEL
DİYARBAKIR ÇERMİK HELİN ANMIN THERMAL FACILITIES
3RD AIRPORT SEFİNE QUARRY
3RD AIRPORT SAFA REGION QUARRY
3RD AIRPORT, CONSTRUCTION SITE OF RUNWAY 3
HASANKEYF DAM CONSTRUCTION WORK
NUSAYBİN YOUTH PARK
ELAZIĞ KARAKOÇAN 16 CLASSROOM CAPACITY SCHOOL PROJECT
NEVŞEHİR İMAMHATİP SCHOOL
İNÖNÜ ÜNİVERSITY PRESIDENT HOUSE
KKC MARMARAY METRO PROJECT
PARTIAL WORKS AT ORGANIZED INDUSTRY ZONE (OIZ)

MALATYA ORGANIZED INDUSTRY ZONE

İKİTELLİ ORGANIZED INDUSTRY ZONE
VAN ORGANİZE SANAYİ BÖLGESİ
İZMİR KEMALPAŞA OIZ BİSAN BİSİKLET AŞ FACTORY
ANKARA ASO 2ND AND 3RD ORGANIZED INDUSTRY ZONES

DISTRIBUTION COMPANIES

OSMANGAZİ EDAŞ ESKİŞEHİR/KÜTAHYA/UŞAK/AFYON/BİLECİK MAINS

AYDEM EDAŞ AYDIN/DENİZLİ/MUĞLA MAINS
GEDİZ EDAŞ İZMİR/MANİSA MAINS
TREDAŞ LÜLEBURGAZ MAINS
VANGÖLÜ EDAŞ MUŞ MAINS
ÇORUH EDAŞ GİRESUN MAINS
DİCLE EDAŞ ŞANLIURFA/MARDİN /BATMAN/DİYARBAKIR/SİİRT/ŞIRNAK MAINS
SAKARYA EDAŞ MAINS
FIRAT EDAŞ MAINS