BOQTibbiCollege

CONSTRUCTION OF 100 BEDED PRE FAB HOSPITAL AT 3rd FLOOR TIBBI COLLEGE PATNA, BIHAR.
SN Ref Description Unit Quantity Rate Amount

A. CIVIL & INTERIOR WORKS
DISMANTLING WORK
15.3 Demolishing RCC work including stacking of steel bars and disposal of
1 cum 11.15 1411.20 15,727.82
unserviceable material within 50m lead
Demolishing brick work including stacking disposal of unserviceable
-
material within 50m lead
-
Extra for scrapping, cleaning and straightening reinforcement from
2 15.6 kg 1114.50 3.90 4,346.55
R.C.C. or R.B. work.
-
1005A Recovery of salvage value of scrapped Steel T.M.T. Bars of above item (
3 kg 1114.50 -28.22 (31,451.19)
50% of Rs. 56.44 per kg)
15.7 Demolishing brick work including stacking of serviceable material

4 -
and disposal of unserviceable material within 50 meters lead:
15.7.4 in cement mortar cum 10.94 823.70 9,014.08
-
15.12 Dismantling doors windows and clerestory windows (steel or
5 wood) shutters including chowkhats, architrage, holdfasts etc. -
complete and stacking within 50 metres lead:
15.12.1 Of area 3 sqm and below Each 2.00 151.80 303.60
-
15.13 Taking out doors, windows and clerestory window shutters (steel
6 -
or wood) including stacking within 50 meters lead.
15.13.1 Of area 3 sqm and below Each 2.00 58.90 117.80
-
15.25 Dismantling stone slab flooring laid in cement mortar including
7 stacking of serviceable material and disposal of unserviceable sqm. 12.96 106.70 1,382.83
material within 50 metres lead.
-
15.26 Demolishing brick tile covering in terracing including stacking of
8 serviceable material and disposal of unserviceable material within sqm. 20.52 44.10 904.93
50 metres lead.
-
15.60. Disposal of building rubbish / malba / similar unserviceable, dismantled
or waste materials by mechanical means, including loading,
9 transporting, unloading to approved municipal dumping ground or as cum 26.09 219.30 5,721.19
approved by Engineer- in-charge, beyond 50 m initial lead, for all leads
including all lifts involved.
RCC WORK -
5.33 Providing and laying in position ready mixed or site batched design mix
cement concrete for reinforced cement concrete work; using coarse
aggregate and fine aggregate derived from natural sources, Portland
Pozzolana /Ordinary Portland /Portland Slag cement, admixtures in
recommended proportions as per IS: 9103 to accelerate /retard setting
of concrete, to improve durability and workability without impairing
strength; including pumping of concrete to site of laying, curing,
10 carriage for all leads; but excluding the cost of centering, shuttering, -
finishing and reinforcement as per direction of the engineer-in-charge;
for the following grades of concrete.
Note: Extra cement up to 10% of the minimum specified cement
content in design mix shall be payable separately. In case the cement
content in design mix is more than 110% of the specified minimum
cement content, the contractor shall have discretion to either re-
design the mix or bear the cost of extra cement.
5.33.2 All work above Plinth level upto floor V Level. -

Concrete of M-25 grade with minimum cement content of 330
b) 5.33.2.1 cum 47.00 5,863.20 275,570.40
kg/cum
-
FORM WORK -
5.9 Centring and shuttering including strutting,propping etc. and removal
11 -
of form for.
b) 5.9.3 Suspended floors, roofs, landings, balcnies and access platform. sqm 84.91 437.50 37,145.94
5.9.5 Lintels, beams, plinth beams, girders, bressumers and cantilevers.
c) sqm 132.16 404.70 53,483.13
d) 5.9.6 Columns,Pillars, Piers, Abutments, Posts and Struts sqm 92.46 494.40 45,712.22
e) 5.9.7 Stairs,(excluding landings) except spiral staircaces. sqm 9.11 439.90 4,008.59
STEEL REINFORCEMENT -
5.22 Reinforcement for R.C.C. work including straightening, cutting,
12 -
bending, placing in position and binding all complete.
i) 5.22.7A Thermo-Mechanically Treated bars TMTC-500-8mm dia. kg 1411.30 94.50 133,367.62
ii) 5.22.7B Thermo-Mechanically Treated bars TMTC-500-10mm dia. kg 235.22 92.60 21,781.03
iii) 5.22.7C Thermo-Mechanically Treated bars TMTC-500-12mm dia. kg 1332.89 90.80 121,026.61
iv) kg 4861.00 91.70 445,753.70
5.22.7D Thermo-Mechanically Treated bars TMT Fe-500-16, 20, 25 mrn dia.
BRICK WORK -
Providing and laying autoclaved aerated cement blocks masonry with

150mm/230mm/300 mm thick AAC blocks in super structure above
plinth level up to floor V level with RCC band at sill level and lintel level
13 cum 607.13 6192.20 3,759,462.65
with approved block laying polymer modified adhesive mortar all
complete as per direction of Engineer-in-Charge. (The payment of RCC
6.47 + band and reinforcement shall be made for seperately). Extra for Brick
6.3A work in superstructure above plinth level upto floor V cum.
HALF BRICK MASONRY -

6.21A Extra for providing and placing in position 2 Nos, 6 mm dia , MS bars at
14 every third course of half brick masonry (with F. P. S. bricks) sqm 831.00 113.60 94,401.60
Steel Work -
10.15 Providing and fixing pressed steel door confirming IS code 4351
manufactured from commerical mild steel sheet of 1.25 mm thickness
including hinges, jamb, lock jamb, bead and if required angle threshold
of mild steel angle of section 50 x 25 mm or base ties of 1.25mm
pressed mild steel welded or rigidly fixed together by mechnical
15 -
means, adjustable lugs with split end tail to each jamb including steel
butt hinges 2.5 mm thick with mortar guards, lock strike-plate and
shock absorbers as specified and applying a coat of approved steel
primer after pre-treatment of the surface as directed by Engineer-in-
charge:
10.15.2 Profile C -
10.15.2.1 Fixing with adjustable lugs with split end tail to each jamb metre 156.35 432.60 67,637.01
-
10.32 Steel work welded in built up sections/ framed work, including cutting,
16 hoisting, fixing in position and applying a priming coat of approved -
steel primer using structural steel etc. as required.
In gratings, frames, guard bar, ladders, railings, brackts. gates & similar
a 10.32.2 works. kg 337.50 114.60 38,677.50
Providing and fixing hand rail by welding etc. to steel ladder railings &
17 10.33 staircases railing including applying a priming coat of approved steel -
primer
a 10.33.1 MS tube (medium) 40mm nominal bore kg 45.00 121.90 5,485.50
DOOR AND WINDOW WORK -
21.1 Providing and fixing aluminium work for doors,windows, ventilators
and partitions with extruded built up standard tubular sections/
appropriate Z sections and other sections of approved make
conforming to IS: 733 and IS : 1285, fixed with rawl plugs and screws or
with fixing clips, or with expansion hold fasteners including necessary
filling up of gaps at junctions, at top, bottom and sides with required
18 PVC/neoprene felt etc. Aluminium sections shall be smooth, rust free, -
straight, mitred and jointed mechanically wherever required including
cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass /
stainless steel screws, all complete as per architectural drawings and
the directions of Engineer-in-charge. (Glazing and paneling to be paid
for separately) :
a 21.1.1 For fixed Portion -

21.1.1.2 Powder coated aluminium (minimum thickness of powder coating 50
kg 869.40 418.40 363,756.96
micron)
21.1.2 For shutters of doors,windows & ventilators including providing and
fixing hinges/ pivots and making provision for fixing of fittings
b -
wherever required including the cost of PVC / neoprene gasket
required (Fittings shall be paid for separately).
Powder coated aluminium (minimum thickness of powder coating 50
21.1.2.2 kg 349.70 480.20 167,925.94
micron)
9.21 Providing and fixing ISI marked flush door shutters conforming to IS:
2202 (Part I) non-decorative type, core of block board construction
19 with frame of 1st class hard wood and well matched commercial 3 ply -
veneering with vertical grains or cross bands and face veneers on both
faces of shutters :
9.21.1 35 mm thick including ISI marked Stainless Steel butt hinges with
a sqm 74.15 1775.30 131,642.93
necessary screws.
9.127 Providing & Fixing decorative high pressure laminated sheet of plain /
wood grain in gloss / matt / suede finish with high density protective
20 surface layer and reverse side of adhesive bonding quality conforming -
to IS : 2046 Type S, including cost of adhesive of approved quality.
a 9.127.2 1.0 mm thick. sqm 148.31 669.00 99,216.05

9.24 Extra for providing vision panel not exceeding 0.1 sqm in all type of
21 -
flush doors (cost of glas excluded)
a 9.24.1 Rectangular or Square sqm 74.15 173.90 12,895.12
9.124 Providing and fixing factory made 30 mm thick door shutter made of
solid PVC foam profile. The styles & rails shall be of size 75 mm x 30
mm having wall thickness 5 mm. The styles, top & bottom rails shall
have one side wall thickness of 15 mm integrally extruded on the hinge
side of the profile for better screw holding power. The styles and rails
shall be reinforced with M.S. tubes of size 33 mm x 17 mmx 1mm,
painted with primer, all four corners of reinforcement to be welded or
sealed. Solid PVC extruded
bidding (push fit type) will be set inside the styles and the rails with a
22 cavity, to receive single piece extruded 5 mm PVC sheet as panel. The -
styles and rails will be mitred cut and joint with the help of PVC solvent
cement & self driven self tapping screws. Single piece extruded solid
PVC lock rail of size 100 mm x 30 mm with wall thickness 5 mm & 15
mm integrally extruded in the middle of the lock rail & fixed with styles
with the help of PVC solvent cement & self driven self tapping screws
of size 100 mm x 8mm complete as per manufacturer’s specifications
and direction of Engineer-in-charge.
9.124.1 Non decorative finish sqm 36.96 2898.90 107,143.34

Providing and fixing factory made door frame (single rebate) made out
of single piece extruded solid PVC foam profile with homogenous fine
cellular structure having smooth outer integral skin having 62 mm
23 9.123 width & 32 mm thickness, frame will be mitred & Jointed with self metre 110.00 453.00 49,830.00
driven self tapping screws of size 38 mm x 4 mm & PVC solvent cement
, including fixing the frame to wall with suitable dia & length
9.100 Providing and fixing aluminium handles ISI marked anodised (anodic
coating not less than grade AC 10 as per IS : 1868) transparent or dyed
24 -
to required colour or shade with necessary screws etc. complete :
a) 9.100.1 125 mm each 88.00 57.10 5,024.80

b) 9.100.2 100 mm each 218.00 50.30 10,965.40
9.97 Providing and fixing aluminium tower bolts, ISI marked, anodised
(anodic coating not less than grade AC 10 as per IS : 1868 ),
25 -
transparent or dyed to required colour or shade, with necessary screws
etc. complete:
a) 9.97.1 300x10 mm each 146.00 111.40 16,264.40
b) 9.97.4 150x10 mm each 218.00 71.60 15,608.80
9.101 Providing and fixing aluminium hanging floor door stopper ISI
marked anodised (anodic coating not less than grade AC 10 as per
26 -
IS : 1868) transparent or dyed to required colour and shade with
necessary screws etc. complete.
a) 9.101.1 Single rubber stopper each 44.00 34.00 1,496.00
9.96 Providing and fixing aluminium sliding door bolts ISI marked
anodised (anodic coating not less than grade AC 10 as per IS : 1868)
27 -
transparent or dyed to required colour or shade with nuts and screws
etc. complete :
a) 9.96.1 300x16 mm each 88.00 235.50 20,724.00
9.76 Providing and fixing bright finished brass 100 mm mortice latch and
lock with 6 levers and a pair of lever handles of approved quality with
28 each 58.00 639.40 37,085.20
necessary screws etc. complete.
9.83 Providing and fixing aluminium die cast body tubular type universal
hydraulic door closer (having brand logo with ISI, IS : 3564, embossed
on the body, door weight upto 35 kg and door width upto 700 mm),
with necessary accessories and screws etc. complete.
29 each 73.00 979.50 71,503.50
21.3 Providing and fixing glazing in aluminium door, window, ventilator

shutters and partitions etc. with EPDM rubber / neoprene gasket etc.
complete as per the architectural drawings and the directions of
30 -
engineer-in-charge . (Cost of aluminium snap beading shall be paid in
basic item):
a) 21.3.2 With float glass panes of 5.5 mm thickness sqm 135.00 1115.10 150,538.50
FLOORING WORK -
Providing and fixing stone slab with table rubbed, edges rounded and
polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal
partitions by cutting a chase of appropriate width with chase cutter
31 8.10 and embedding the stone in the chase with epoxy grout or with -
cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone
aggregate 6 mm nominal size) as per direction of Engineer-in-charge
and finished smooth.
a 8.10.2 Granite Stone of approved shade sqm 3.28 3542.90 11,625.14
11.26 Kota stone slab flooring over 20 mm (average ) thick base laid over and
jointed with grey cement slurry mixed with pigment to match the
32 shade of the slab including rubbing and polishing complete . Base with -
1:1:1 (1 lime : 1 surkhi: 1 coarse sand ) / 1:4 (1 cement: 4 coarse sand )
a) 11.26.1 20 to 25 mm thick sqm 31.00 1252.70 38,833.70

11.27 Kota stone slabs 20 mm thick in risers of steps, skirting, dado and
pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3
33 coarse sand) and jointed with grey cement slurry mixed with pigment sqm 9.00 1334.90 12,014.10
to match the shade of the slabs, including rubbing and polishing
complete. Details of cost for 10 sqm
11.41 Providing and laying vitrifed floor tiles in different sizes {thickness to be
specified by the manufactruer) with water absorption's less than 0.08
% and conforming to IS : 15622 of approved make in all colours and
34 shades, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse -
sand ) including grouting the joint with white cement and matching
pigments etc., complete.
a) 11.41.2 Size of Tile 60x60 cm sqm 1473.00 1638.80 2,413,952.40

11.46.2 Providing and laying Vitrified tiles in different sizes (thickness to be
specified by manufacturer), with water absorption less than 0.08 % and
conforming to I.S. 15622, of approved make, in all colours & shade, in
35 skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 sqm 94.35 1191.80 112,450.62
cement: 3 coarse sand), including grouting the joint with white cement
& matching pigments etc. complete. (Size of Tile 600x600 mm)
11.36 Providing and fixing 1st quality ceramic glazed wall tiles conforming to
IS : 15622 (Thickness to be specified by the manufacture) of approved
make in all colours, shades except burgundy , bottle green , black of
any size as approved by Engineer-in-charge in skirting , risers of steps
36 and dados over 12 mm thick bed of cement Motar 1:3(1 cement: 3 sqm 535.56 795.00 425,767.82
coarse sand ) and jointing with grey cement slurry @ 3.3 kg per sqm
including pointing in white cement mixed with pigment of matching
shade complete.
11.37 Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness
to be specified by the manufacturer) of ist quality conforming to IS :
15622 of approved make in colours such as white , Ivory , Grey , Fume
37 Red , Brown , laid on 20 mm thick Cement motar 1:4 (1 cement: 4 sqm 99.55 686.80 68,370.94
coarse sand ) including pointing the joints with white cement and
matching pigment etc., complete.
11.31 Extra for pre finished nosing in treads of steps of Kota stone / sand
38 m 36.00 82.90 2,984.40
stone slab.
8.2 Providing and fixing 18 mm thick gang saw cut, mirror polished,
premoulded and prepolished, machine cut for kitchen platforms, vanity
counters, window sills, facias and similar locations, of required
size,approved shade, colour and texture laid over 20 mm thick base
39 -
cement mortar 1:4 (1 cement : 4coarse sand), joints treated with white
cement, mixed with matching pigment, epoxy touch ups,including
rubbing, curing, moulding and polishing to edges to give high gloss
finish etc. complete at all levels.
a 8.2.1.1 Area of each slab upto 0.5 sqm Granite of any colour and shade sqm 22.80 2458.00 56,042.40
8.2.2.1 Area of each slab over 0.2 sqm but upto 0.5 sqm Granite of any colour
b sqm 34.20 4242.90 145,107.18
and shade
8.5 Extra for providing opening of required size & shape for wash
basins/kitchen sink in kitchen platform. Vanity counters and similar
40 location in marble/stone work including necessary holes for pillar taps opening 13.00 428.20 5,566.60
etc. including rubing and polishing of cut edges etc. complete.
PAINTING AND FINISHING WORK -

41 13.11 12mm cement plaster of mix : -
a 13.11.4 1:6 (1 cement : 6 fine sand) sqm 4600.50 141.50 650,970.64
18 mm cement plaster in two coat under layer 12 mm thick cement
plaster 1:5 (1 cement: 5 course sand) and a top layer 6mm thick
42 13.19 sqm 2071.54 218.20 452,010.22
cement plaster 1:3(1 cement: 3 coarse sand finiished rough with
sponge
43 13.24 6 mm cement plaster to ceiling of mix : -
a 13.24.1 1:3(1 cement: 3 coarse sand) sqm 641.00 131.30 84,163.30
Finishing walls with Acrylic Smooth exterior paint of required
44 13.46 -
shade :
New work (Two or more coat applied @ 1.67 ltr/ 10 sqm
a 13.46.1 over and including priming coat of exterior primer applied sqm 2072.00 137.00 283,864.00
@ 2.20 kg/ 10 sqm)
13.80A.1 Providing and applying white cement based putty of average thickness
1 mm, of approved brand and manufacturer, over the
45 sqm 7313.00 81.10 593,084.30
plastered wall surface to prepare the surface even and smooth
complete.
13.92 Wall painting with plastic emulsion paint of approved brand and
46 -
manufacture to give an even shade:
a) 13.92.1 Two or more coats on new work sqm 4705.94 86.40 406,593.41
13.78 Applying one coat of cement primer of approved brand and
47 -
manufacture on wall surface :
a 13.78.1 Cement primer sqm 4705.94 38.60 181,649.37
13.93 Painting with synthetic enamel paint of approved brand and
48 -
manufacture to give an even shade:
a 13.93.1 Two or more coats on new work sqm 2976.50 84.50 251,514.25
ROOFING AND WATER PROOFING WORK -
22.3 Providing and laying water proofing treatment to vertical and
horizontal surfaces of depressed portions of W.C. kitchen and the like
consisting of: (i) 1st course of applying cement slurry @ 4.4 kg/sqm
mixed with water proofing compound conforming tc IS 2645 in
recommended proportions.(ii) 11 nd course of 20 mm cement plaster
49 1:3 (1 cement:3 coarse sand)mixed with water proofing compound in sqm 152.35 480.60 73,219.41
recommended proportion, (iii) Illrd course of applying blown
or/residual bitumen aplied hot at 1.7 kg. per sqm of area, (iv) Ivth
course of 400 micron thick PVC sheet.(Overlaps at joints of PVC shet
should be 100 mm wide and pasted to each other with bitumen @ 1.7
kg/sqm).
22.8 Providing and laying integral cement based water proofing treatment
including preparation of surface as required for treatment of roofs,
balconies, terraces etc consisting of following operations: a) Applying a
slurry coat of neat cement using 2.75 kg/sqm of cement admixed with
water proofing compound conforming to IS. 2645 and approved by
Engineer-in-charge over the RCC slab including adjoining walls upto
300 mm height including cleaning the surface before treatment. b)
Laying brick bats with mortar using broken bricks/brick bats 25 mm to
115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand)
admixed with water proofing compound conforming to IS : 2645 and
approved by Engineer-in-charge over 20 mm thick layer of cement
mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water
50 proofing compound conforming to IS : 2645 and approved by Engineer- -
in-charge to required slope and treating similarly the adjoining walls
upto 300 mm height including rounding of junctions of walls and slabs.
c) After two days of proper curing applying a second coat of cement
slurry using 2.75 kg/ sqm of cement admixed with water proofing
compound conforming to IS : 2645 and approved by Engineer-in-
charge. d) Finishing the surface with 20 mm thick jointless cement
mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water
proofing compound conforming to IS : 2645 and approved by Engineer-
in-charge including laying glass fibre cloth of approved quality in top
layer of plaster and finally finishing the surface with trowel with neat
cement slurry and making pattern of 300x300mm square 3 mm deep.
e) The whole terrace so finished shall be flooded with water for a
minimum period of two weeks for curing and for final test. All above
22.8.1 With average thickness of 120 mm and minimum thickness at khurra as
a sqm 50.00 850.70 42,535.00
65 mm.
Making khurras 45x45 cm with average minimum thickness of 5 cm
cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone
aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400
51 12.39 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse each 5.00 189.40 947.00
sand) and a coat of neat cement, rounding the edges and making and
finishing the outlet complete.
12.81 Providing and fixing to the inlet mouth of rain water pipe cast iron
52 grating 15 cm diameter and weighing not less than 440 grams. each 5.00 47.90 239.50
12.38 Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2
coarse sand : 4 stone aggregate 10 mm and down gauge), including
53 -
finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per
standard design :
a 12.38.1 In 75 x75 mm deep chase Rmt 50.00 66.00 3,300.00
-
10.1 Structural steel work in single section, fixed with or without connecting
plate, including cutting, hoisting, fixing in position and applying a
54 kg 8000.00 88.30 706,400.00
priming coat of approved steel primer all complete.
10.2 Structural steel work riveted or bolted in built up sections, trusess and
55 framed work, including cutting,hoisting,fixing in position and applying a Kg. 6500.00 95.40 620,100.00
priming coat of approved steel primer all complete.
56 26.41 Designing, providing, installing and fixing factory finished custom

designed cold form Light Gauge Steel Framed super structure
comprising of steel wall panel, trusses, purlins etc manufactured out of
minimum 0.75 mm thick steel sheet as per design requirements. The
steel sheet shall be galvanized (AZ-150 gms Aluminum Zinc Alloy
coated steel having minimum yield strength 300- 550 Mpa) conforming
to AISI specifications and IBC 2009 for cold formed steel framing and
construction and also as per IS: 875-1987, ISO 800-1984 and IS: 801-
1975. The wind load shall be as per provisions of IS 875 (part -III).
LGSFS frame shall be designed as per IS: 801 using commercially
available software such as Frame CAD Pro-11.7/ STAAD PROV8i/
ArchitekV2.5.16/ Revit architecture-2011 or equivalent. Proper usage -
of Connection Accessories like Heavy Duty Tension Ties, Light Duty
Hold-ons, Twist Straps (to connect truss with wall frames), Strong Tie,
Tie Rod, H-Brackets, Boxing Sections, L-Shaped Angles for better
structural stability. The framing section shall be cold form C-type
having minimum web depth 89 mm x 39mm flange x 11mm lip in
required length as per structural design requirement duly punched
with
dimple/slot at required locations as per approved drawings. The slots
will be along centre line of webs and shall be spaced minimum 250mm
away from both ends of the member.
The frame can be supplied in panelized or knock down condition in

specific dimensions and fastened with screws extending through the
steel beyond by minimum of three exposed threads. All self drilling
tapping screws for joining the members shall have a Type II coating in
accordance with ASTM B633(13) or equivalent corrosion protection of
gauge 10 & 12, TPI 16 & 8 of length 20mm. The frames shall be fixed to
RCC slab or Tie beam over Neoprene rubber using self expanding
carbon steel anchor bolt of dia as per approved drawings. design
subject to minimum 12mm diameter and 121mm length conforming to
AISI 304 and 316 at 500mm c/c with minimum embedment of 100mm Kg. 44910.00 217.50 9,767,925.00
in RCC (RCC to be paid separately) and located not more than 300mm
from corners or termination of bottom tracks complete in all respects.
The item also includes the submission of stability reports duly
examined and issued by any NIT/IIT. The rate includes the concept
design, detailed design, fabrication of sections, transportation,
installation and all required fixing arrangement at site as described
above.
-
-
12.20 Providing flat iron brackets 50x3mm size, with necessary bolts, nuts
57 and washers etc.for fixing asbestos cement / G.S sheet gutters with Metre 81.00 70.50 5,710.50
purlins.
-
12.8 Providing flashing of 40 cm over al width in plain, G.S. sheet fixed with
G.I.J. or L. hooks, bolts and nuts G.I. limpet and bitumen washers
58 -
complete, bent to shape and fixed in wall with cement mortar 1:3(1
cement:3 coarse sand).
12.8.1 1.00 mm thick with zinc coating not less than 275 gm/m3 Metre 60.00 462.90 27,774.00
-
FALSE CEILING WORK -
Providing and fixing mineral fibre false ceiling tiles at all heights of
size 595X595mm of approved texture, design and pattern. The tiles
should have Humidity Resistance (RH) of 99%, Light Reflectance ?85%,
Thermal Conductivity k = 0.052 - 0.057 w/m K, Fire Performance as per
(BS 476 pt - 6 &7)in true horizontal level suspended on interlocking T-
Grid of hot dipped all round galvanized
iron section of 0.33 mm thick (galvanized @120 gsm ) comprising of
59 main T runners of 15x32 mm of length 3000 mm, cross T of size -
15x32mm of length 1200 mm and secondary intermediate cross T of
size 15x32 mm of length 600 mm to form grid module of size 600x600
mm suspended from ceiling using galvanized mild steel item
(galvanised@80gsm) 50 mm long 8mm outer diameter M-6 dash
fasteners, 6 mm diameter fully threaded hanger rod up to 1000 mm
length and L-shape level adjuster of size 85x25x2 mm, spaced at 1200
mm centre to centre along main ‘T’.
The system should rest on periphery walls /partitions with the help of
GI perimeter wall angle of size24x24X3000 mm made of 0.40 mm thick
sheet, to be fixed to the wall with help of plastic rawl plug at 450 mm
centre to centre & 40 mm long dry wall S.S. screws. The exposed
-
bottom portion of all Tsections used in false ceiling support system
shall be pre-painted with polyester baked paint, for all heights. The
work shall be carried out as per specifications, drawings and as per
directions of the engineer-in-charge.
With 16 mm thick beveled tegular mineral fibre Antimicrobial false
a 26.27.3 sqm 780.00 1952.10 1,522,638.00
ceiling tile confirming to ISO 5 (class 100 ) specifications
12.82 Providing and fixing at all height false ceiling of 12.5 mm thick-tapered
edge gypsum board conforming to IS : 2095 including -providing and
fixing of frame work made of special sections power pressed from M.S.
sheet and galvanized in accordance with zinc coating 600 as per IS :
277 and consisting of angle cleats of size 25 mm wide x 16 mm thick
with flanges of 22 mm and 27 mm at 1200 mm centre to centre one
flange fixed to the ceiling with dash fastener 12.5 mm dia x 40 mm
long with 6 mm dia bots to the angle hangers of 25x25x5 mm of
required length, and other end of angle hanger being fixed with nut
and bots to rate of 1200 mm centre to centre to which the ceiling
section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of
26 mm each having clips of 10.5 mm at 450 mm centre to centre shall
60 be be fixed in a direction perpendicular to G. I. channel with sqm 312.00 738.30 230,349.60
connecting clips made out of 2.64 mm dia x 230 mm long G. I. wire at
every junction including fixing the gypsum board with ceiling section
and perimeter channels 0.5 mm thick 27 mm high having flanges of 20
mm and 30 mm long . the perimeter of ceiling fixed to wall / partition
with the help of rawl plugs at 450 mm centre to centre with 25 mm
long dirve- all screws @ 230 mm interval including jointing and fixing to
a flush of tapered and square edges of the gypsum board with
recommended filler., paper tapes, finisher and two coats of primer
suitable for gypsum board as per manufactures specification and also
including the coat cutouts made with frame of perimeter channels
suitably fixed all complete as per-drawing and specification and
direction of the Engineer-in-Charge but excluding the cost of painting.
-
61 CARRIAGE AND SUPPLY OF MATERIAL -
a Bricks (lead 7km P+ 1km K) 1000 nos 133.30 918.24 122,401.39
b Stone chips (354 KM from Pakur by Rail + 35 km By Road ) cum 38.54 2890.18 111,387.54
c Coarse sand (1+34 KM from Koilwar ) cum 200.89 912.20 183,251.86
d Cement M.T 76.14 379.12 28,866.20
e Steel M.T 7.84 379.12 2,972.45
Extra for Difference in Basic Cost of Material
f Brick 1000 nos 0.00 1605.18 -
g Cement MT 76.14 265.12 20,186.24
-
B. PHE Items -
Sanitary Installations & Internal Water Supply
62 17.1.1 Providing and fixing water closet squatting pan (Indian type W.C. pan )
with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C.
flushing cistern, including flush pipe, with manually controlled device
(handle lever) conforming to IS : 7231, with all fittings and fixtures
complete, including cutting and making good the walls and floors
wherever required: White Vitreous china Orissa pattern W.C. pan of
size 580x440 mm with integral type foot rests
Each 4 4470.90 17883.60
63 17.1 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per
IS 13983 with C.I. brackets and stainless steel plug 40 mm including
painting of fittings and brackets, cutting and making good the walls
wherever required :
b 17.10.2.1 Kitchen sink with out drain board 610x510 mm bowl depth 200 mm
Each 6 3786.60 22719.60
64 17.3 Providing and fixing 600x450 mm beveled edge mirror of superior glass
(of approved quality) complete with 6 mm thick hard board ground
fixed to wooden cleats with C.P. brass screws and washers complete.
Each 9 1068.50 9616.50
65 17.3 Providing and fixing P.V.C. Waste pipe for sink or wash basin including
P.V.C. waste fittings complete.
a 17.28.1 Semi rigid pipe
b 17.28.1.2 40 mm dia. Each 6 101.70 610.20
66 17.22A Providing and fixing CP Brass 32mm size Bottle Trap of approved
quality & make and as per the direction of Engineer-in-charge. (WB &
Urinal) Each 20 886.20 17724.00
67 17.22B Providing and fixing CP Brass Single lever telephonic wall mixer of
quality & make as approved by Engineer in charge.
a a. 15 mm nominal dia Each 6 6119.20 36715.20
68 17.34 Providing and fixing toilet paper holder :

a 17.34.1 C.P. brass Each 8 550.70 4405.60
69 ,17.3 Providing and fixing white vitreous china pedestal type water closet
(European type) with seat and lid, 10 litre low level white vitreous
china flushing cistern & C.P. flush bend with fittings & C.I.brackets, 40
mm flush bend, overflow arrangement with specials of standard make
and mosquito proof coupling of approved municipal design complete,
including painting of fittings and brackets, cutting and making good the
walls and floors wherever required :
17.3.1 W.C. pan with ISI marked white solid plastic seat and lid Each 8 5504.30 44034.40
70 17.80 Providing and fixing white vitreous china battery based infrared sensor
operated urinal of approx. size 610 x 390 x 370 mm having pre & post
flushing with water (250 ml & 500 ml consumption), having water inlet
from back side, including fixing to wall with suitable brackets all as per
manufacturers specification and direction of Engineer-in-charge.
Each 7 6534.20 45739.40
71 ,18.49 Providing and fixing C.P. brass bib cock of approved quality conforming
to IS:8931 :
18.49.1 15 mm nominal bore Each 12 434.20 5210.40
72 ,18.51 Providing and fixing C.P. brass long body bib cock of approved quality
conforming to IS standards and weighing not less than 690 gms.
73 ,18.53 Providing and fixing C.P. brass angle valve for basin mixer and geyser
points of approved quality conforming to IS:8931
74 ,18.22 Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet :
18.22.2 150 mm dia. Each 6 190.10 1140.60
75 ,18.59 Providing and fixing PTMT grating of approved quality and colour.
18.58.1.2 125 mm dia. Each 27 45.20 1220.40
76 18.53A Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of
approved make and quality as per direction of Engineer-in-charge.
Each 36 61.70 2221.20
77 ,17.7 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass
pillar taps, 32 mm C.P. brass waste of standard pattern, including
painting of fittings and brackets, cutting and making good the walls
wherever require :
17.7.4 White Vitreous China Flat back wash basin size 550x 400
mm with single 15 mm C.P. brass pillar tap Each 2 2135.80 4271.60
78 17.7A Providing and fixing wash basin with C.I. brackets, 15 mm

dia CP Brass single hole basin mixer of approved quality and make,
including painting of fittings and brackets, cutting and making good the
walls wherever required:- (a) White Vitreous China Wash basin size
550x400 mm with a 15 mm CP Brass single hole basin mixer.
Each 11 3932.10 43253.10
79 18.84.1 roviding & fixing chrome plated brass battery based infrared sensor
operated pillar cock, having foam flow technology. 15 mm nominal
bore Each 2 8050.50 16101.00
80 18.21 Providing and fixing uplasticised PVC connection pipe with brass ions :
18.21.2.1 45 cm length. 15 mm nominal bore Each 36 85.20 3067.20
81 17.16.A Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1
metre long with S.S. triangular plate to Eureopean type W.C. of quality
and make as approved by Engineer - in-charge Each 8 299.40 2395.20
82 17.72 Providing and fixing PTMT towel ring trapezoidal shape 215 mm long,
200 mm wide with minimum distances of 37 mm from wall face with
concealed fittings arrangement of approved quality and
colour,weighing not less than 88 gms. Each 7 204.70 1432.90
17.73 Providing and fixing PTMT towel rail complete with brackets fixed to
wooden cleats with CP brass screws with concealed fittings
arrangement of approved quality and colour.
83 17.73.2 600 mm long towel rail with total length of 645 mm, width
78 mm and effective height of 88 mm, weighing not less
than 190 gms Each 6 424.00 2544.00
84 18.65 Providing and fixing PTMT soap Dish Holder having length of
138mm,breadth 102mm, height of 75mm with concealed fitting
arrangements,weighing not less than 106 gms. Each 15 96.80 1452.00
Soil, Waste, Vent & Rain Water Pipes

85 4.1 Providing and laying in position cement concrete of specified grade
excluding the cost of centering and shuttering - All work up to plinth
level:
4.1.3 1:2:4 (1 cement :2 coarse sand: 4 hard stone aggregate 20mm and
down gauge). Cum 3.00 3998.10 11994.30
86 ,17.35 Providing and fixing Centrifugally cast (spun) iron socket & spigot (S&S)
pipe as per IS: 3989 soil, waste and vent pipes .
17.35.1 100mm dia
a 17.35.1.2 Centrifugally cast (spun) iron socketed pipe as per IS 3989 Metre 125 1036.50 129562.50
87 ,17.38 Providing and fixing bend of required degree with access door,
insertion rubber washer 3 mm thick, bolts and nuts complete. Sand
cast iron S&S as per IS - 3989.
a 17.38.1.2 100 mm dia. Each 12 597.60 7171.20
88 ,17.39 Providing and fixing plain bend of required degree Sand cast iron S&S
as per IS - 3989.
100 mm dia
a 17.39.1.2 Sand cast iron S&S as per IS : 3989 Each 39 439.70 17148.30
89 17.42 Providing and fixing double equal plain junction of required degree.
a 17.42.1 100x100x100x100 mm
b 17.42.1.2 Sand cast iron S&S as per IS - 3989 Each 12 881.20 10574.40
90 17.43 Providing and fixing single equal plain junction of required degree with
access door, insertion rubber washer 3 mm thick, bolts and nuts
complete.
a 17.43.1 100x100x100 mm
17.43.1.2 Sand cast iron S&S as per IS - 3989 Each 12 431.40 5176.80
91 17.44 Providing and fixing single equal plain junction of required degree.
a 17.44.1 100x100x100 mm
92 17.48 Providing and fixing single unequal plain junction of required degree.
a 17.48.1 100x100x75 mm
93 ,17.56 Providing and fixing terminal guard.Sand cast iron S&S as per IS - 3989.
a 17.56.1.2 100 mm Each 12 439.70 5276.40
94 ,17.57 Providing and fixing collar.Sand cast iron S&S as per IS - 3989.
a 17.57.1.2 100 mm Each 8 439.70 3517.60
95 ,17.58 Providing lead caulked joints to sand cast iron/centrifugally cast (spun)
iron pipes and fittings of diameter :
a 12.39.2 100 mm Each 375 426.60 159975.00
96 17.59 Providing and fixing MS Stay clamps for sand cast iron/ centrifugally
cast (spun) iron pipes of diameter.
a 17.59.1 100 mm dia Each 45 128.70 5791.50
97 7760+7764 Providing and fixing M.S. cap 100 mm dia and M.S. socket 100 mm dia
Each 9 322.50 2902.50
98 ,17.60 Providing and fixing trap of self cleansing design with screwed down or
hinged with or without vent arm complete, including cost of cutting
and making good the walls and floors.
a 17.60.1 100 mm inlet and 100 mm outlet
Sand cast iron S&S as per IS - 3989 Each 19 1129.20 21454.80
99 17.65 Painting sand cast iron/ centrifugally cast (spun) soil, waste, vent pipes
and fittings with paint of any colour such as chocolate grey, or buff etc.
over a coat of primer (of approved quality) for new work.
a 17.65.1 100 mm diameter pipe Metre 125 46.10 5762.50
100 ,12.78 Providing & fixing on wall face unplasticised -Rigid PVC rain water pipes
conforming to IS:13592 Tyape A included jointing with seal ring
conforning to IS:5382 leaving 10 mm gap for thermal expansion.
(i)Single socketed pipes.
a 12.78.2 110 mm diameter Metre 50 257.50 12875.00
Water Supply
101 18.7 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having
thermal stability for hot & cold water supply including all CPVC plain &
brass threaded fittings i/c fixing the pipe with clamps at 1.00 m
spacing. This includes jointing of pipes & fittings with one step CPVC
solvent cement and testing of joints complete as per direction of
Engineer in Charge.
Internal Work - Exposed on Wall
18.7.4 32 mm nominal outer dia .Pipes. Metre 70 395.20 27664.00
a 18.7.5 40 mm nominal outer dia .Pipes. Metre 25 538.40 13460.00
18.7.6 50 mm nominal outer dia .Pipes. Metre 15 791.00 11865.00
102 18.8 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having
thermal stability for hot & cold water supply including all CPVC plain &
brass threaded fittings i/c fixing the pipe with clamps at 1.00 m
spacing. This includes jointing of pipes & fittings with one step CPVC
solvent cement and the cost of cutting chases and making good the
same including testing of joints complete as per direction of Engineer
in Charge.
Concealed work including cutting chases and making good the walls
etc.
a 18.8.2 20 mm nominal outer dia .Pipes. Metre 170 350.80 59636.00
b 18.8.3 25 mm nominal outer dia .Pipes. Metre 15 463.10 6946.50
103 ,18.10 Providing and fixing G.I. pipes complete with G.I. fittings and clamps,
i/c cutting and making good the walls etc.
Internal work - Exposed on Wall
a 18.10.4 32 mm dia nominal bore Metre 5 457.80 2289.00
b 18.10.5 40 mm dia nominal bore Metre 10 589.20 5892.00
c 18.10.6 50 mm dia nominal bore Metre 15 727.10 10906.50
104 18.40. Painting G.I. pipes and fittings with two coats of anti-corrosive
bitumastic paint of approved quality .
a 18.40.4 32 mm dia nominal bore Metre 5 11.80 59.00
b 18.40.5 40 mm dia nominal bore Metre 10 13.40 134.00
c 18.40.6 50 mm dia nominal bore Metre 15 15.80 237.00
105 18.77 Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing
drain pipe etc. and repairing the hole after insertion of drain pipe etc.
with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone
aggregate 20 mm nominal size), including finishing complete so as to
make it leak proof. Each 115 217.10 24966.50
106 Fire 11 Supplying, fixing, testing and commissioning of butterfly valve of PN

1.6 rating with bronze/gunmetal seat duly ISI
marked complete with nuts, bolts, washers, gaskets conforming to IS
13095 of following sizes as required.
a Fire-11.3
65 mm dia
Each 6 3864.00 23184.00
b Fire-11.4
80 mm dia
Each 4 4588.00 18352.00
107 18.48
Providing and placing on terrace (at all floor levels) polyethylene
water storage tank, ISI : 12701 marked, with cover and suitable
locking arrangement and making necessary holes for inlet, outlet and
overflow pipes but without fittings and the base support for tank.
Litre 10000 9.70 97000.00
C. FIRE FIGHTING ITEMS -

FIRE PUMPS AND HYDRANT WORKS
Supplying and fixing single headed internal hydrant valve with
instantaneous Gunmetal/Stainless Steel coupling of 63 mm dia with
cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blank
108 9 Gunmetal/Stainless Steel cap and chain as required : Set 2.00 7,245.00 14,490.00
9.1 Single headed Gunmetal
Supplying and fixing first-aid Hose Reel with MS construction spray

painted in post office red, conforming to IS 884 complete with the
109 17 following as required.
20 mm nominal internal dia water hose thermoplastic (Textile
reinforced) type -2 as per IS: 12585
20 mm nominal internal dia gun metal globe valve & nozzle.
Drum and brackets for fixing the equipmets on wall
Connections from riser with 25 mm dia stop gun metal valve & M.S.
Pipe and socket.
17.1 30 m Set 2.00 7,920.00 15,840.00
Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm

dia male and female couplings duly bound with GI wire, rivets etc.
110 16 conforming to IS 636 (type-A) as required :
16.1 Gun Metal Set 4.00 5,206.00 20,824.00
Supplying & fixing 63 mm dia gun metal short branch pipe with 20 mm
nominal internal diameter size nozzle conforming to IS 903 suitable for
instantaneous connection to interconnect hose pipe coupling as
111 18 required :
18.1 Providing and fixing of standard short size GM branch pipe with nozzle
of 20mm nomnal bor outlet with instaneous type 63 mm dia coupling
complete IS marked & TAC approved. Nos. 2.00 2,393.00 4,786.00
112 13
Supplying and fixing orifice plate made out of 6 mm thick stainless
steel (Grade 304) with orifice of required size to be fitted between
flange & landing valve of external and internal hydrants to reduce
pressure at the outlet to the level of 3.5 kg/cm2 complete as
required. Each 2.00 1,236.00 2,472.00
PIPING FOR FIRE FIGHTING SYSTEM
Providing, installation, testing and commissioning of non-return valve
of following sizes confirming to IS:5312 complete with rubber gasket,
113 14 GI bolts, nuts, washers etc.as required :
C 14.6 150 mm dia Each 1.00 17300 17,300.00
Supplying, fixing, testing and commissioning of butterfly valve of PN

1.6 rating with bronze/gunmetal seat duly ISI marked complete with
nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes
114 11 as required :
A 11.6 150 mm dia Each 2.00 8241 16,482.00
Providing, laying, testing & commissioning of 'C' class heavy duty MS

pipe conforming to IS 3589/IS 1239 including Welding, fittings like
elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe
on the wall/ceiling with suitable clamp/support frame and painting
with two or more coats of synthetic enamel paint of required shade
115 7 complete as required :
a 7.8 150 mm nominal bore (class C) Rm 65.00 1,856.00 120,640.00
b 7.7 100 mm nominal bore (class C) Rm 50.00 1,316.00 65,800.00
c 7.6 80 mm nominal bore (class C) Rm 75.00 951.00 71,325.00
d 7.5 65 mm nominal bore (class C) Rm 70.00 832.00 58,240.00
e 7.4 50 mm nominal bore (class C) Rm 120.00 646.00 77,520.00
f 7.3 40 mm nominal bore (class C) Rm 110.00 509.00 55,990.00
g 7.2 32 mm nominal bore (class C) Rm 15.00 417.00 6,255.00
h 7.1 25 mm nominal bore (class C) Rm 570.00 359.00 204,630.00
Providing, fixing, testing & commissioning of 15mm dia uartzoid bulb

type sprinklers of rating 68 degree centigrade with required
116 21 accessories :
a 21.1 Pendent Sprinkler Each 180.00 408.00 73,440.00
b 21.2 Upright Sprinkler Each 50.00 408.00 20,400.00
c 21.3 Horizontal side wall sprinkler Each 1.00 505.00 505.00
d 21.4 Concealed sprinkler Each 2.00 1,330.00 2,660.00
Providing & fixing flow switch in following sizes M.S. pipe including
117 23 connection etc as required.
23.2 150mm dia Each 1.00 8,634.00 8,634.00
Providing & fixing of pressure switch in M.S. pipe line including

118 22 connection etc. as required. Each 3.00 1,442.00 4,326.00
Supplying, installation, testing & commissioning of sprinkler flexible

pipe (UL Listed) of stainless steel complete with 15 NPT on reducer
thread with maximum working pressure of 175 PSI test pressure of 875
PSI (Burst) with branch line (Inlet) 25mm NPT male thread to sprinkler
head (Outlet) 15mm NPT female thread with reducer, nipple, 2 side
brackets, center bracket, stockbar of following sizes complete as
119 25 required.
25.3 1200mm Set 2.00 1,568.00 3,136.00
Providing, installation, testing & commissioning of adjustable rosette

plate for 15mm dia in white finish UL Listed or FM approved complete
120 29 as required. Each 150.00 167.00 25,050.00
A CIRCUIT CUM POINT WIRING

Wiring for light point /Fan Point/ exhaust fan point/ call bell point with
Sl.No.1.3.
1.5 Sq.mm FR PVC insulated Copper conductor single core cable in
3 E.Deptt.
121 surface/ recessed PVC conduit, with modular type switch, modular
Bihar S/R-
plate, suitable size G.I. Box etc. as required.
18, P-21
(a) Group C Point 173 724 125252
Code No. Wiring for twin control light point with 1.5 Sq.mm FR PVC insulated
1.4 E. Copper conductor single core cable in surface/ recessed medium class
122 Deptt. PVC conduit, 2 way modular switch,modular plate, suitable size G.I. Box
Bihar S/R- etc. as required.
18, P-22 Point 10 755 7550
Wiring for group controlled (looped) light point/fan point/exhaust

fan point/ call bell point (without independent switch etc.) with 1.5
sq. mm FRLS PVC insulated copper conductor single core cable in
DSR-
123 surface/ recessed steel conduit, and earthing the point with 1.5 sq. mm
1.54.3
FRLS PVC insulated copper conductor single core cable etc. as
required.
Group C Point 139 707 98273
Code No. Supplying and fixing of 25mm sizes of PVC conduit along with
1.21.2 E. accessories in surface/ recess including cutting the wall and making
124 Deptt. good the same in case of recessed conduit as required.
Bihar S/R-
18, P-29 Metre 2069 69 142727
Bihar S/R-
18, P-29 Metre 275 109 29975
Bihar S/R-
18, P-29 Metre 85 137 11645
Code No. Wiring for light/Power plug with 2x4 Sq.mm FR PVC insulated Copper
1.5 E. conductor single core cable in surface recessed PVC conduit along with
127 Deptt. 1 No. 4 sq.mm. FR PVC insulated copper conductor single core cable for
Bihar S/R- loop earthing as required.
18, P-22 Metre 2955 200 591000
Code No. Wiring for circuit/ submain wiring along with earth wire with the
1.7.2 E. following sizes of PVC insulated Copper conductor single core cable in
128 Deptt. surface recessed PVC conduit as required.
Bihar S/R- CKT- (2 x2.5mm2 + 1x2.5 mm2 earth wire)
18, P-22 Metre 550 161 88550
Bihar S/R- CKT- (2 x4.0mm2 + 1x4.0 mm2)
18, P-22 Metre 4200 200 840000
Bihar S/R- Submain- (2 x6.0 mm2 + 1x6.0 mm2 earth wire)
18, P-22 Metre 125 271 33875
Bihar S/R- Submain (2 x10.5 mm2 + 1x10 mm2)
18, P-22 Metre 85 382 32470
Bihar S/R- Submain (2 x16.00 mm2 + 1x16 mm2)
18, P-22 Metre 65 559 36335
Supplying and fixing following modular switch/ socket on the existing

133 DSR-1.24 modular plate & switch box including connections but excluding
modular plate etc. as required.
DSR-
133.3 Bell Push
1.24.8 Each 2 126 252
Supplying and fixing following modular type switch/socket o the

Sl.No.1.24
existing modular plate and switch box including connection bu
.6 E.Deptt.
133.1 excluding modular plate etc. as required.
Bihar S/R-
Telephone socket outlet
18, P-31
Each 7 103 721
Supplying and fixing following modular type switch/socket o the

Sl.No.1.24
existing modular plate and switch box including connection bu
.7 E.Deptt.
133.2 excluding modular plate etc. as required.
Bihar S/R-
TV antenna socket outlet
18, P-31
Each 2 102 204
Supplying and fixing following size/modules G.I. box along with

Sl.No.1.27
modular base & cover plate for modular switches in recess etc. as
.1 E.Deptt.
134 required.
Bihar S/R-
18, P-31
134.1 1 ro 2 modular (78mm x 78mm x 45mm) Each 11 167 1837
Supplying and fixing following modular base & cover plate on existing
Sl.No.1.28
modular metal boxes etc. as required.
.1 E.Deptt.
135
Bihar S/R-
18, P-32
135.1 1 or 2 Module Each 11 79 869
Sl.No.1.31 Supplying and fixing suitable size G.I. Box with modular plate and cover
E.Deptt. in front on surface or in recess including providing and fixing 3 pin, 5/6
136
Bihar S/R- amps modular socket outlet and 5/6 amps modular type switch
18, P-33 connection etc. as required. Each 348 362 125976
Supplying and fixing suitable size GI box with modular plate and cover
in front on surface or in recess, including providng and fixing 2 Nos. 3
137 DSR-1.30 pin 5/6 A modular socket outlet and 2 Nos. 5/ 6 A modular switch,
connections etc. as required. (For light plugs to be used in non
residential buildings). Each 2 582 1164
Sl.No.1.32 Supplying and fixing suitable size G.I. Box with modular plate and cover
E.Deptt. in front on surface or in recess including providing and fixing 6 pin, 5/6
138
Bihar S/R- & 15/16 amps modular socket outlet and 15/16 amps modular switch
18, P-33 connection, painting etc. as required. Each 139 413 57407
Supplying and fixing suitable size GI box with modular plate and cover
in front on surface or in recess, including providing and fixing 2nos. 6
139 NSR-1
pin 16 A modular socket outlet with 2nos. 15/16 A modular switch,
connections etc. as required. Each 32 550 17600
Code No. Supplying and fixing 2 Pin, 6 amps ceilling rose on the existing Junction
1.33 E. box / wooden block including connection etc. as required.
140 Deptt.
Bihar S/R-
18, P-33 Each 9 65 585
Supplying and fixing two module stepped type electronic fan regulator
141 DSR-1.25 on the existing modular plate switch box including connections but
excluding modular plate etc. as required. Each 101 342 34542
Providing and fixing circular/hexagonal Fan box cast iron /metal sheet
Box for ceiling fan clamp of internal dia 140mm , 73 mm height,Top id
of 1.5mm thick MS sheet with its Top surface hacked of proper
142 CIVIL-SOR bonding top lid shall be screwed into cast iron /metal sheet Box by
mean of 3.3mm dia round headed screw one lock at the corners.clamp
shall be made of 12mm dia ms Bar band toshape as per standrd
drawing. Each 101 150 15150
Installation, testing and commissioning of ceiling fan, including wiring

the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS
143 DSR-1.45 PVC insulated, copper conductor, single core cable, including providing
and fixing phenolic laminated sheet cover on the fan box etc. as
required. Each 101 203 20503
Supplying & fixing suitable size GI box wih modular plate and cover in
front on surface or in recess including providing and fixing 25 A
144 DSR-1.57 modular socket outlet and 25 A modular SP MCB, “C” curve including
connections, painting etc. as required.
(For AC/ GEYSER) Each 26 639 16614
Supplying and drawing following pair, 0.5 sq.mm FR PVC insulated

Sl.No.1.16
copper conductor, unarmoured telephone cable in the existing
.1 E.Deptt.
145 surface/recessed PVC conduit as requirjed.1 Pair
Bihar S/R-
18, P-27
Each 245 13 3185
Supplying and drawing following pair, 0.5 sq.mm FR PVC insulated
Sl.No.1.16
copper conductor, unarmoured telephone cable in the existing
.3 E.Deptt.
146 surface/recessed PVC conduit as requirjed.4 Pair
Bihar S/R-
18, P-27
Each 50 22 1100
Sl.No.1.17 Supplying and drawing Construction of co-axial TV cable RG-6 grade

E.Deptt. copper conductor PE insulated, with PVC sheath in the existing
147
Bihar S/R- surface/recessed PVC conduit as required..
18, P-27 Metre 50 29 1450
Suppling and fixing 20 Amps 240 volt. SPN industrial type socket out
Code No.
let, with 2 pole and earth, metal enclosed plug tope along with 20
2.19 E.
amps "C" curves, SP. MCB, in sheet steel enclosure on surface or in
148 Deptt.
recess, with chained metel cover for the socket out let and complete
Bihar S/R-
with connection testing and commissioning etc. as required.
18, P-44
Each 1 996 996
Supplying and fixing 20 amps, 415 volts, TPN industrial type, socket
Sl. No.
outlet with 4 pole and earth, metal enclosed plug top alongwith 30
2.25
amps "C" curve, TP MCB, in sheet steel enclosure, on surface or in
149 E.Deptt
recess, with chained metal cover for the socket outlet and complete
Bihar S/R-
with connections, testing and commissioning etc. as required.
18, P-39
Each 2 1912 3824
Supplying and fixing 30 amps, 415 volts, TPN industrial type, socket
Sl. No.
outlet, with 4 pole and earth, metal enclosed plug top alongwith 30
2.26
amps "C" curve, TP MCB, in sheet steel enclosure, on surface or in
150 E.Deptt
recess, with chained metal cover for the socket outlet and complete
Bihar S/R-
with connections, testing and commissioning etc. as required.
18, P-41
Each 2 3157 6314
DISTRIBUTION BOARD
Supplying and fixing following way single pole and neutral, sheet steel,
Sl. No. MCB distribution board, 240 volts, on surface recess, complete with
2.8.3 tinned copper bus bar, neatral busbar, earth bar dinbar detachable
151 E.Deptt gland plate, interconnections, Phosphatised and powder painted
Bihar S/R- including earthing etc. as required (But without MCB/RCCB/Isolator)
18, P-40 2+8 way single door
Each 2 741 1482
Supplying and fixing following way single pole and neutral, sheet steel,
Sl. No. MCB distribution board, 240 volts, on surface recess, complete with
2.8.5 tinned copper bus bar, neatral busbar, earth bar dinbar detachable
152 E.Deptt gland plate, interconnections, Phosphatised and powder painted
Bihar S/R- including earthing etc. as required (But without MCB/RCCB/Isolator)
18, P-40 2+12 way single door
Each 2 949 1898
Suppling and fixing following way horizontal type three pole and
Code No.
neatrel, sheet steel, M.C.B., distribution board, 415 Volts on surface/
2.9.2 E.
recess complete with tinned copper bus bar, neutral bus bar, earth bar
153 Deptt.
din bar, interconnection, powder painted including eathing, etc. as
Bihar S/R-
required (But without MCB/RECB./ Isolator)
18, P-41
6 way (4+18) single door horizontal type Each 4 1961 7844
Suppling and fixing following way horizontal type three pole and
Code No.
neatrel, sheet steel, M.C.B., distribution board, 415 Volts on surface/
2.9.3 E.
recess complete with tinned copper bus bar, neutral bus bar, earth bar
154 Deptt.
din bar, interconnection, powder painted including eathing, etc. as
Bihar S/R-
required (But without MCB/RECB./ Isolator)
18, P-41
8 way (4+24) single door horizontal type Each 6 2152 12912
Sl. No. Supplying and fixing following rating 240/415 volts "C" curve
2.12.3 mainiature Circuit Breaker suitable for inductive load of Following
155 E.Deptt poles in the existing MCB, DB, complete with connections testing and
Bihar S/R- commissioning etc. as required.
18, P-42 40 amps, Single Pole and neutral Each 14 729 10206
Sl. No. Supplying and fixing following rating 240/415 volts "C" curve
2.13.1 mainiature Circuit Breaker suitable for inductive load of Following
156 E.Deptt poles in the existing MCB, DB, complete with connections testing and
Bihar S/R- commissioning etc. as required.
18, P- 43 6/32 amps, SPN Each 248 632 156736
Sl. No. Supplying and fixing following rating double pole,(single phase and
2.17.2 neutral), 240 volts residual current circuit breaker (RCCB), having a
157 E.Deptt sensitivity current up to 300 milliamperes in the existing MCB DB
Bihar S/R- complete with connections, testing and commissioning etc. as
18, P-44 required. 40 amps Each 4 2180 8720
Sl. No. Supplying and fixing following rating, TP&N, (three phase and neutral),
2.18.3 415 volts, residual current circuit breaker (RCCB), having a sensitivity
158 E.Deptt current up to 300 milliamperes in the existing MCB DB complete with
Bihar S/R- connections, testing and commissioning etc. as required. 63 amps.
18, P-44 Each 30 2941 88230
Sl. No. upplying and fixing following rating four pole, 415 voltas Isolator in the
2.16.1 existing MCB DB complete with connections, testing and
159 E.Deptt commissioning etc. as required.
Bihar S/R- 40 amps
18, P-43 Each 4 495 1980
Sl. No. Supplying and fixing following rating four pole, 415 voltas Isolator in
2.16.2 the existing MCB DB complete with connections, testing and
160 E.Deptt commissioning etc. as required.
Bihar S/R- 63 amps
18, P-43 Each 10 746 7460
C CABLES, MAINS AND SUB MAINS

LAYING OF LT CABLES
Sl. No. Laying of one number PVC insulated and PVC sheathed / XLPE power
7.3.4 cable of 1.1 KV grade of following size direct in ground including
161 E.Deptt excavation, and refilling the trench etc. as required but excluding sand
Bihar S/R- cushioning and protective covering. Above 185 sq.mm and upto 400
54 sq.mm. Metre 180 75 13500
LAYING OF LT CABLES
Sl. No.
7.4.1 Fixing for laying of one number PVC insulated and PVC sheathed / XLPE
162 E.Deptt power cable of 1.1 KV grade of following size on wall surface as
Bihar S/R- required. Upto 35 sq.mm. (Clamped with 1 mm thick saddle).
54 Metre 1600 21 33600
Sl. No.
Fixing for laying of one number PVC insulated and PVC sheathed / XLPE
7.4.2
power cable of 1.1 KV grade of following size on wall surface as
163 E.Deptt
required. Abode 35 sq.mm. amd upto 95 sq.mm.(Clamped with 25 x 3
Bihar S/R-
mm MS flat clamp).
54 Metre 170 55 9350
Sl. No.
7.4.3
164 E.Deptt
required. Abode 95 sq.mm. and upto 185 sq.mm.(Clamped with 25 x
Bihar S/R-
40 x 3 mm MS flat clamp).
54 Metre 180 64 11520
Sl. No.
7.4.4
165 E.Deptt
required. Abode 185 sq.mm. and upto 400 sq.mm.(Clamped with 40 x
Bihar S/R-
3 mm MS flat clamp).
54 Metre 0 88 0
11 kV LT CABLE END TERMINATION

Supplying and making end termination with brass compression gland
and aluminium lugs for following size of PVC insulated and PVC
166 DSR-9.1
sheathed / XLPE aluminium conductor cable of 1.1 KV grade as
required.
166.1 NSR-11 4 core, 6 Sq.mm. Each 28 150 4200
DSR- 4 core, 10 Sq.mm.
166.2
9.1.32 Each 22 220 4840
DSR- 4 core, 16 Sq.mm.
166.3
9.1.33 Each 18 250 4500
DSR-
166.4 3.5C X 35 Sqmm
9.1.21 Each 14 300 4200
DSR-
166.5 3.5C X 50 Sqmm,
9.1.22 Each 1 329 329
DSR-
166.6 3.5C X 95 Sqmm,
9.1.24 Each 2 473 946
DSR-
166.7 3.5C X 120 Sqmm,
9.1.25 Each 3 489 1467
D CABLE TRAY
Supplying and installing following size of perforated Hot Dipped
Galvanised Iron cable tray (galvanisation thickness not less than 50
167 DSR-4.1 microns) with perforation not more than 17.5%, in convenient
sections, joined with connectors, suspended from the ceiling with G.I.
suspenders including G.I. bolts & nuts, etc. as required.
167.1 DSR-4.1 100 mm width X 50 mm depth X 1.6 mm thickness Meter 120 476 57120
E EARTHING SYSTEM
Sl. No. 3.2 Earthing with GI earth pipe 4.5 meter long and 40 mm dia including
E.B.C accessories, and providing masonary enclosures with cover plate
168 Deptt having locking arrangment and watering pipe etc.with charcoal and salt
Bihar S/R- as required .
18, P-46 Set 2 5125 10250
Sl.No.3.4 Earthing with G.I. earth plate 600 mm x 600 mm x 6 mm thick including
E.Deptt. accessories, and providing masonary enclosure with cover plate having
169
Bihar S/R- locking arrangement and watering pipe 2.7 metre long etc. with
18, P-46 charcoal/ coke and salt as required. Set 2 6276 12552
Sl.No.3.6 Earthing with copper earth plate 600 mm x 600 mm x 3 mm thick

E.Deptt. including accessories, and providing masonary enclosure with cover
170
Bihar S/R- plate having locking arrangement and watering pipe 2.7 metre long
18, P-46 etc. with charcoal/coke and salt as required Set 4 12831 51324
Sl. No. Providing and fixing 6 SWG dia G.I.wire on surface or in recess for loop
3.16 earthing as required.
171 E.Deptt
Bihar S/R-
18, P-42 Metre 250 38 9500
Sl. No. Providing and fixing 25 mm x 5 mm copper strip on surface or in recess

3.14 for connection etc. as required.
172 E.Deptt
Bihar S/R-
18, P-42 Metre 55 1032 56760
Sl. No. Providing and fixing 25 mm x 5 mm G.I. strip on surface or in recess for
3.15 connections etc. as required.
173 E.Deptt
Bihar S/R-
18, P-42 Metre 55 150 8250
F LIGHTING FIXTURE
Supplying and fixing single wall mounted 18/22 watt LED type batten
Sl.
fitting complete with electronic driver and LED tube etc directly on
No.5.9.3
174 wall/ ceiling including connections with 1.5 sq.mm FR PVC insulated
E.Deptt.Bi
copper conductor and earthing the body etc. as required
har S/R-47
Each 2 684 1368
Supplying and fixing recess mounted 6/7 watt LED vertical down lighter
Sl.
complete with all accessories and replaceable electronic driver directly
No.5.11.3
175 on false ceiling including connection with 1.5 sq.mm FR PVC insulated
E.Deptt.Bi
copper conductor cable and earthing the body etc. as required.
har S/R-48
Each 3 671 2013
Supplying and fixing recess mounted 12 watt LED vertical down lighter
Sl.
complete with all accessories and replaceable electronic driver directly
No.5.11.4
176 on false ceiling including connection with 1.5 sq.mm FR PVC insulated
E.Deptt.Bi
copper conductor cable and earthing the body etc. as required.
har S/R-48
Each 43 971 41753
Supplying and fixing recess mounted 18/24 watt LED vertical down
Sl.
lighter complete with all accessories and replaceable electronic driver
No.5.11.5
177 directly on false ceiling including connection with 1.5 sq.mm FR PVC
E.Deptt.Bi
insulated copper conductor cable and earthing the body etc. as
har S/R-49
Supplying and fixing indoor recess mounting decorative mirror optic

Sl.
luminaire with PS parallite louvre and suitable for 2 x 36 Watt FPL/PLL
No.5.10.1
178 lamp etc. directly on false ceiling, including connection with 1.5 sq,mm
E.Deptt.Bi
FR PVC insulated copper conductor cable and earthing the body etc. as
har S/R-4
H DSR-17.2 INTELLIGENT FIRE ALARM SYSTEM

Supplying, installation, testing and commissioning of micro processor
based intelligent addressable main fire alarm panel, central processing
unit with the following loop modules and capable of supporting not
less than 240 devices (including detectors) and minimum 120 detectors
per loop and loop length up to 2 km, network communication card,
minimum 320 character graphics/ LCD display with touch screen or
other keypad and minimum 4000 events history log in the non volatile
DSR- memory (EPROM), power supply unit (230 ± 5% V, 50 hz), 48 hrs back-
179
17.2.1 up with 24 volt sealed maintenance free batteries with automatic
charger. The panel shall have facility to connect printer to printout log
and facility to have seamless integration with analog/digital voice
evacuation system (which is part of the schedule of work under SH: PA
System) and shall be complete with all accessories . The panel shall be
compatible for IBMS system with open protocol BACnet/ Modbus over
IP complete as per specifications.
DSR-
179.1 Two Loop Panel. Set 1 238907 238907
17.2.1.2
Supplying, installation, testing & commissioning of repeater

180 DSR-17.2.3 panel wih 320 character/ Touch screen LCD display with inbuilt
reset, acknowledge and silence switches complete as required No. 1 108572 108572
Supplying, installation, testing & commissioning of intelligent

181 DSR-17.2.4 analog addressable photothermal detector complete with
mounting base complete as required. No. 1 2846 2846
Supplying, installation, testing & commissioning of response

182 DSR-17.2.5 indicator on surface/recessed MS Box having two LED,
metallic cover complete with all connections etc as required. No. 48 263 12624
Supplying, installation, testing & commissioning of fault
183 DSR-17.2.7
isolator complete with base as required. No. 4 3257 13028
Supplying, installation, testing & commissioning of

184 DSR-17.2.10
addressable fire control module complete as required. No. 3 2990 8970

185 DSR-17.2.14
addressable manual call point complete as required. No. 3 3859 11577

186 DSR-17.2.15
addressable horn cum strobe complete as required. No. 3 3494 10482
Supplying and fixing of following sizes of medium class PVC conduit

along with accessories in surface/recess including cutting the wall and
183 DSR-1.21
making good the same in case of recessed conduit as required.
183.1 DSR-1.21.2 25 mm dia conduit RM 34 90 3024
Supplying, installation, testing & commissioning of fire fighter

184 DSR-17.2.19
phone jack complete as required. No. 1 1588 1588
TOTAL SI AMOUNT 32,109,864
CONSTRUCTION OF 100 BEDED PRE FAB HOSPITAL AT 3rd FLOOR TIBBI COLLEGE PATNA, BIHAR.
NAME OF FIRM
ADDRESS OF FIRM
NON SCHEDULE ITEM

SN Ref Description Unit Qty. Rate Amount
A. CIVIL & INTERIOR WORKS
Providing & fixing chemical rebaring of 20mm diameter, making hole

per
1 NS diameter of 25mm & depth 300mm into existing RCC structure with 456.00 -
nos
HILTI HIT-RE 500 chemicals.
Providing & Fixing of min 85 mm thick PUF Roof Panel:
Continuous line PUF insulated corrugated Panel with max pitch height
of 35mm at max center to center distance of 250mm
- Outer 0.6 mm TCT PPGL corrugated sheet 300 MPA with RMP
paint finish in 150 GSM
- Inner 0.5 mm TCT PPGL sheet 300 MPA with RMP paint finish in
150 GSM
The PUF panel shall be manufactured on Continuous line running on
uninterrupted power supply. 85mm PUF roof Panel includes crest
2 NSI height and shall have pre coated GI sheet on both side of Puf. The pre sqm. 1827.00 -
coated sheet shall be of minimum 300 Mpa steel grade confirming to IS
14246:1995 and shall have zinc coating of minimum 150 gsm as per IS :
277 : 1992, 5-7 microns epoxy primer on both side of the sheet and
polyester top coat 15-18 micron. The PPGI sheet shall have plastic
protective guard film of minimum 25 microns to avoid scratches during
transportation. The PU Foam shall be self-extinguishing type
confirming to IS 12436
Approved Panel makes - Tata / Sintex / Kingspan Jindal / Roxul
rockwool
Fitting and fixing Single faucet storage type Water cooler ( Size 461
mm wide x 582 mm deep x 1217 mm height, weight 46 kg) fully
stainless body having storage capacity of 40 ltrs, Cooling Capacity of 40
Ltrs./hr. with hermetic type compressor, gas cooled motor equipped
with over load protector, condensor for propeller type, thermostat
3 NS autometically controlled temperature, refrigerent R -22, 230 volt, Each 2 -
single phase 50 hertz, maximum current 2.3 amp including plug top
and electrical lead wire connection upto 3 metres from the cooler,
water inlet and drain out connections complete in all respects of Voltas
Model No 40/40 Tushar PSS type or similar type of approved make.
Fitting and fixing Water purifier for drinking purpose of capacity 6

litres/min, 5 purification system with reverse osmosis system with
ultra Ventilated Membrane, TDS 500 to 2000 mgl/ppm, auto shut off
with microswitch float manual flush facility, TDS reduction 90% having
automatic backwash system with filteration unit along with all
4 NS accessories including plug top and electrical lead wire connection upto Each 2 -
3 metres from the purifier, water inlet and drain out connections
complete in all respects similar to Aquaguard or similar approved
make - (Model - Aquasure Elegant RO water purifier of size width 360
mm x height - 430 mm x depth 235 mm and weight 8.5 kg).
CORRIDOR WALLGUARD PROTECTION
The wall guard must be 140 mm wide, must have 2mm thick aluminum
retainer, must have 2 mm thick scratch and stain resistance rigid vinyl
cover, should be coated with anti-fungal and anti-bacterial chemical.
the system shall be designed to withstand impact and provides a
cushioned surface with its integrated rubberized absorber, making it
5 NSI ideal for areas like high traffic corridors, loading bays and light cargo RMT 298 -
lifts. the vinyl cover should be fire retardant according to the norms
and should have test certificates of that. it must be according to ROHS
compliances texture to provide an anti-slip surface, it should have
adjustable end cap , corner joint and adaptor plate .aluminum retainer
should be in mill finish and fabricated from 6063-T5 alloy as directed
by Engineer In-Charge.
Supply installation testing & commissioning of Cubical tracks system
Hospital
made of Powder coated Aluminium alloy,stain free polyster fabric
Curtain
6 ,Water repellent Curtains ,smooth movement ,non sticking runnner each 114 -
tracks & I.V.
with Stainless steel hooks made from mirror finish stainless steel
tree System
,adjustable height with all accessories.
Providing and laying foam concrete filling in sunken portion of W.C. &
kitchen with approved quality of cinder including supply of labour,
6 NS cum 45.00 -
material, and tools and plant etc. required for proper completion of
the work as per direction of Engineer-in-charge.
7 NS Extra charges for making of cove light/Recesses in P.O.P Rmt 85.00 -
Providing & fixing trap door in the false ceiling using 3/4” thk
commercial ply laminated with approved finish laminate with
8 NS necessary CP teak frame work of size 2" x 1.5", Oak wood mouldings as sqm 22.00 -
per Architect’s drawing, brass hinges, latches etc. complete to the
approval of architect
Providing fixing, supply and installation of storage unit of size (800 X

1900 x 300). The storage unit will be made with 1.50 mm thick E.G.P.
120 GSM Zinc coated steel panels (Make SAIL/Nippon/Bhushan) with
9 Storage Unit sterile surface coating. The unit will be divided into 2 equal parts and each 8.00 -
each part will have individual glass doors with locking system. Each
part will have glass rack to keep surgical medicines etc.
Automatic Scrub Sink -

2 bay scrub sink made out of 304 graded brushed finished stainless
10 NSI steel, 1600mm length, with electrical sensors, 1 Nos. Mixture valve, 2 each 3.00 -
Nos. Solenoid valves Make :- altos/iss
Signage -
Providing and fixing of signages modular curved frame technology of
various widths and lengths to fometre suggested usages made of
11 aluminium extruded sections. Duly anodised all signages shall be - -
provided with 0.6-0.8mm polycarbonate protecting film over the prints
of appropriate size .all complete as per direction by Engineer in Charge.
a NSI Wall Projected 250x210mm, both sides Each 28.00 -
b NSI Door Mounted, 300x80mm Each 44.00 -
B. PHE Items
12 NS-1 Providing and fixing C.P. cast brass twin coat hooks fixed to PVC rawl
plug with SS screws Jaguar Cat. No. AON-7761 or approved equivalent. Each 12 0.00
13 NS- 3 Providing and fixing in position 100x50 mm dia GI reducing elbow

Each 8 0.00
including fix to floor with cement mortar.
14 NS-5a Providing and fixing of uPVC Waste pipes 6 kg/cm2 (IS: 4985:2000)
including with all fittings e.g. couplings, tees, bends, reducers and
screwed adoptors jointing with solvent cement as per Manufacturer's
specifications complete including cutting holes or chases in wall and
making good the same wherever required. (Waste pipe from fixtures
AND LAB WASTE).
50 mm dia Metre 25 0.00
32 mm dia Metre 30 0.00
15 NS-6 Providing and fixing forged brass ball valve of brass body with hard
chrome plated steel ball inside PTFE (Teflon) seat & ring with chrome
plated centre handle with female BSP threads complete in all respects.
a 15 mm nominal bore Each 8 0.00

b 20 mm nominal bore Each 18 0.00
c 25 mm nominal bore Each 12 0.00
d 32 mm nominal bore Each 6 0.00
e 40 mm nominal bore Each 4 0.00
C. FIRE-FIGHTING ITEMS -
Providing and fixing carbon-di-oxide type fire extinguishers consisting

of welded M.S. cylindrical body, internal discharge tube, discharge
16 M.R. nozzle, suspension bracket, conforming to IS 15683, finished externally
with red enamel paint and fixed to wall with brackets complete with
internal charges.
a Capacity 4.5 kg Nos. 4.00 0.00
Providing and fixing (ABC Dry Chemical Powder ) type Fire Extinguisher
of Capacity 6 kg Confirms to IS 15683, bearing ISI mark complete with
brass forged squeeze grip type valve fitted with pressure gauge ,
17 M.R.
pressurize with dry Nitrogen gas filled, with discharge nozzle with wall
mounting bracket complete with internal charges.
a Capacity 6 Kg. Nos. 4.00 0.00
Providing and fixing angle iron (40 mm x 40 mm x 5 mm) MS door

frame 900x2100 door capable of accommodating fire hose reel,
landing valve, hose pipes, fittings & accessories. The door shall have a
front glass with lock and key arrangement & shall be painted with post
18 MR office red colour (approval shall be taken on the basis of submitted Each 2.00 0.00
sample before ordering) Cost of fire extinguishers not included in item
rate. (Liasioing with civil contractor for making 900x600x2100
Recessed type mansoary box (by civil contractor).
Providing and fixing of TAC approved 1.6mm thick M.S. fire hose
cabinet (750x600x250mm) made out of 16 gauge M.S. sheet capable of
accommodating landing valve, hose pipes, fittings & accessories. The
19 MR box shall have a front glass door with lock and key arrangement & shall Each 2.00 0.00
be painted with post office red colour (approval shall be taken on the
basis of submitted sample before ordering) - for external and roof
hydrant.
20 Providing and fixing of Fire Axe Each 2.00 0.00
Providing and fixing brass ball valve with SS 304 Stem and ball, teflon
21 MR Each 1.00 0.00
seat complete (PN-16).
25mm dia
D. ELECTRICAL WORK -
B MAIN DISTRIBUTION BOARDS / DISTRIBUTION BOARDS
Supply ,installation, testing and commissioning of Main distribution
panels , fabricated out of 14 gauge CRCA sheet steel in cubicle
compartmentised modular 3b construction, free standing floor
mounted, dust and vermin proof with reinforcement of suitable size
angle iron, channel, `T’ sections and / or flats wherever necessary. 16
gauge CRCA sheet steel shall be used for final distribution panels. 3
mm thick cable gland plates shall be provided on top as well as at the
bottom of the panels. Panels shall be treated with all anticorrosive
process before powder coating as per specifications and final approved
shade. 2 Nos. earthing terminals shall be provided for all distrtibution
panels. Panels shall be suitable for 415V, 3 phase, 4 wire, 50 HZ supply
system. Lifting hooks shall also be provided in case of large panels.
Approval shall be taken for each panel in the form of shop drawings
before fabrication.
Galvanised hardwares with zinc passivation shall be used in fabrication

of panels.
22 NSR-2 MDB -1 (Light,Power and Ventilation)
Incoming
1 No. 200 Amps TP+N MCCB with following accessories:
Busbar
300 Amps TPN aluminium bus bars with heat shrinkable insulation
sleeve. - 1 Set
Outgoing
i. 100 A TP+N MCCB - 3 No.
ii. 63 A TP+N MCCB - 6 No.
iii. 63 A 4 Pole MCB - 6 No.
v. 40 A 4 Pole MCB - 1 No.
vi. 32 A 4 Pole MCB - 2 No.
Spare MCB’s of the following :

i. 100 A TP+N MCCB - 1 No.
ii. 63 A 4 Pole MCB - 1 No.
iii. 40 A 4 Pole MCB - 1 No.
Note:
All MCCB’s shall be of 16 KA breaking capacity.

All MCB’s shall be of 16 KA breaking capacity.
MDB -1_ described as above Set. 1 0
23 NSR-3 MDB -U1 (UPS PANEL)
Incoming-1
Phase indicating light shall be protected by 2 Amps SP MCB's. -3 Set.

i.
Incoming-2
Phase indicating light shall be protected by 2 Amps SP MCB's. -3 Set.

ii.
Busbar
150 Amps 4 Pole Copper bus bars with heat shrinkable insulation
sleeve. - 1 Set
Outgoing
i. 63A 4 Pole MCCB - 2 No.
iii. 40 A DP MCB - 4 No.
iv. 25 A DP MCB - 4 No.
Spare MCB’s of the following :

i. 63A 4 Pole MCCB - 1 No.
iii. 40 A DP MCB - 1 No.
iv. 25 A DP MCB - 1 No.
Note:
All MCCB’s shall be of 16 KA breaking capacity.

All MCB’s shall be of 10 KA breaking capacity.
MDB -U1 (UPS PANEL) _ described as above Set. 1 0
11 KV GRADE LT CABLE
Supply of XLPE insulated and PVC sheathed Aluminium conductor
24 NSR armoured cable of 1.1 KV grade confirming to IS : 7098:1988 with upto
date amendments of following sizes:-
24.1 NSR-4 3.5C X 120 Sqmm, Metre 180 0
24.2 NSR-5 3.5C X 95 Sqmm, Metre 80 0
24.3 NSR-6 3.5C X 50 Sqmm, Metre 90 0
24.4 NSR-7 3.5C X 35 Sqmm Metre 150 0
24.5 NSR-8 4 core, 16 Sq.mm. Metre 350 0
Supply and installation of regular/standard model A.C. ceiling fan of

1200 mm sweep including wiring the down rods of standard length
25 NSR-12
(upto 30 cm) with 1.5 sq. mm FR PVC insulated copper conductor etc as
required. Each 97 0
Supply and installation of regular/standard model A.C. ceiling fan of

900 mm sweep including wiring the down rods of standard length
26 NSR-13
(upto 30 cm) with 1.5 sq. mm FR PVC insulated copper conductor etc as
required. Each 4 0
Supply, installation, testing and commissioning of 400 mm sweep,

65W,Blade Material Aluminium Blades ,Speed & Oscillation 3 speed,
Pull cord for Speed and Oscillation.Air delivery minimum 72
27 NSR-14
m³/min,speed minimun 1350 revolution per minute.Suitable for 230 V,
50 Hz, single phase AC Supply, earthing etc. complete as required.
Each 9 0
Supplying installation testing & commissioning of Self contained single

sided exit sign for wall / ceiling / pendant cantilever mounting with LED
28 NSR-15 tube for non maintained battery backup emergency lighting for 3 hours
duration, Prolite make or approved equal in quality and design.
Each 8 0
Supply, Installation, testing & erecting of IP66 bulkhead surface type
lighting fixture 10W made up of pressure die-cast aluminium housing
and Polyster Powder coated die cast aluminium with High quality
polycarbonate diffuser in opal finish for glare free light
distribution.High efficiency long life LED module with SMD LED package
mounted on MCPCB with lumen efficacy of >95 lm/W with system
lumen 950. Powered by integral electronic LED driver with APFC with
29 NSR-16 low THD Output short/open circuit Protection. CCT 5700, CRI>80,
System Efficacy>90Lm/W, THD<15%, PF>.95, IP66,IK 10, Life class of
50,000 hrs @ L70, Operating Temperature:-10 TO +45 DEG.C; Input
Supply Voltage Range:140-270 V, Frequency :50-60 HZ.Including 3 core
1.5 sq.mm FRLS PVC insulated and PVC sheathed copper conductor
cable and earthing etc. up to suitable point complete as required.
CAT REF: HAVELLS : HEXAFT10WLED857SSYMBOPC or approved
Equivalent.
Each 4 0
G UPS SYSTEM
30 KVA UPS 3 phase (415 V + 15%) Volts input & 3 phase output (415
V + 1%), 50 Hz, Input harmonic Current THD <=3% typical at 100% load,
,<=6% maximum at 50% load with Isolation Transformer and 30 min
Battery backup for each UPS along with battery cabinet complete in all
respect including supporting steel structure for UPS and Battery as
30 NSR-17 required.UPS shall have facility for parallel operation. Quoted price
shall be inclusive of required rating single core copper conductor
cable including terminations,connections of UPS to panels, batteries
etc complete in all respect and as per direction of Engineer in Charge.
Each 2 0
Supply, installation, testing and commissioning of Analogue

addressable photoelectric smoke detector with floating senstivity,
mounting based LED, software addressing, Address Switch to
31 NSR-18
programme the detectors is not acceptable, to be installed
under/above false ceiling, roof and concealed space etc.
interconnecting to loop cable complete as required. No. 90 0

addressable Multicreteria Type detector with floating senstivity,
mounting based LED, software addressing, Address Switch to
32 NSR-19
programme the detectors is not acceptable, to be installed
under/above false ceiling, roof and concealed space etc.
interconnecting to loop cable complete as required. No. 1 0

33 NSR-20 addressable photoelectric type monitor module complete as required.
Each 2 0
I PUBLIC ADDRESS SYSTEM

Supplying, installation, testing & commissioning of 1.5/3/6W
34 DSR-17.3.3
metal box ceiling/wall speakers complete as required. No. 20 0
Supply, installation, testing and commissioning of Wall Mounted

Cabinet Speakers of 15 W RMS power,with multitaps, handling
35 NSR-21 capacity, inbuilt 100 V Line Matching Transformer, Internal Tappings,
Trapezoidal Compact Design, Optimized for speech and music
applications No. 0 0
Supply, installation, testing and commissioning of (BOSCH /ATIES) of
rack mounted dual Channel Power Amplifier capable of delivering 240
W RMS power output or 240 W RMS burst output; complete with 100
V Line Matching Transformer, built-in fan for temperature control,
36 NSR-22
Distortion typically 0.03% @ 1 KHz, Hum and Noise 90 dB below rated
output selection facility,provision for hookup with Fire Alarm Panel,
complete with connections and required circuitry
No. 1 0
Supply, installation, testing and commissioning of followings with

37 NSR-23
commnication cable and accessories as required for system.
Voice Controller as required for system.
6 No. Zone selector with micro phone including keypad as required for
system.
Interface as required for system with fire Alarm , Nurse call &
Elevators.
Router as required for system.
System compressive of above as required Lot 1 0
Supply, installation, testing and commissioning of micro phone for

38 NSR-24 remote location and interface with controller including communication
cable and all accessories. No. 1 0
Supply, installation, testing and commissioning of 19" equipment rack

made out of 2 mm thick CRCA sheet duly powder coated; in-built
39 NSR-25
amplifier mounting; amplifier, controller, suitable for housing of above
control equipment. No. 1 0
Supplying and drawing of cable Fire Retardant PVC insulated copper

conductor cable in the existing surface / recessed steel conduit of
40 DSR-17.5.3
following pairs, cores and size including connections and
interconnections etc. as required.
40.1 DSR-17.5.3.1 speaker cable Single pair, 2-core, 1.5 sqmm RM 300 0
40.2 DSR-17.5.3.4 speaker cable Four pair, 2-core, 1.5 sqmm RM 50 0
Supply, installation, testing and commissioning of volume control unit

with bypass arrangement for speakers including providing and fixing of
41 NSR-26
1.6 mm thick GI box enclosures complete as required.
No. 20 0
J CCTV SYSTEM
Supply, installation, testing and commissioning of Out door type Fixed
camera with discreet and tamper-resistant casing. Varifocal 2.8-10 mm
lens with fixed iris. Multiple, individually configurable H.264 and
42 NSR-27 Motion JPEG streams; max HDTV 720p or 1 MP resolution at 30 fps.
Video motion detection and active tampering alarm. Power over
Ethernet. Midspan not included.The camera shall have sound in facility.
42.1 Wall mounted No. 2 0
Supply, installation, testing and commissioning of Fixed dome with

discreet and tamper-resistant casing. Varifocal 2.8-10 mm lens with
fixed iris. Multiple, individually configurable H.264 and Motion JPEG
43 NSR-28 streams; max HDTV 720p or 1 MP resolution at 30 fps. Video motion
detection and active tampering alarm. Power over Ethernet. Midspan
not included.The camera shall have sound in facility.
No. 4 0
Supply, installation, testing and commissioning of 12 channel NVR with
two video outputs . Contractor shall size the NVR for real time 400 FPS
/ 4 CIF resolution 30 days of continous recording and submit data sheet
44 NSR-29 of their storage calculation for both MPEG 4 and H.264 recording
formats. The NVR with IP connectivity, DVD R/W & USB connectivity
with all necessary softwarealong with standalone UPS with 15 min.
Battery back. No. 1 0
Supply, installation, testing and commissioning of 32" totally flat colour

45 NSR-30 LCD monitor with mouted accesseries complete as required.
No. 1 0
Supply, installation, testing and commissioning of user Client control

software (web based) complete as per spec with valid licenses. The
46 NSR-31
software should enable the user to view multiple cameras in any
combination available on the network . Set 1 0
Supply, Installation, testing & Commissioning of 24 port managed PoE

47 NSR-32
Network switch 10/100/1000 with 2 SFP No. 1 0
Supply installation testing and commissioning of Cat 6 UTP FR PVC

48 NSR-33
cable RM 120 0
Supply installation testing and commissioning of cat 6, Patch cords 2

49 NSR-34
mtrs in length No 6 0
Supply installation testing and commissioning of cat 6 Jack s with face

50 NSR-35
plate and gaunge box No 3 0
E. LIFTS -
51 NSI Bed Lift (20 Passenger) Nos. 2.00 -
Supply, Installation, Testing and Commissioning of 20 Passanger Bed
Lift Elevator, with Machine room in lift shaft , with variable voltage
variable frequency drive having a speed of 0.75 metre/ sec
Microprocessor based control suitable for operation on 415 V, 50 Hz, 3
phase A.C. electric Supplying as required.
1.Type of machine Gearless,with Machine Room
2.Capacity
3.Speed 0.75 mps.
4.No of landing 4 Landings(G+3)
5.Number of openings 4 on the same side.
6.Travel approx 15 meter
7.Power Supplying 415v/240v, 50HZ
8.Acceptable voltage Fluctuation +10 to -20%
9.Rate of Accelaration / 0.6-1.5 (adjustable at
site)decelration (m/sec.sq)
10.Jerk (m/sec.sq) 0.7-1.5 (adjustable at site)

11.Vibration in car horizontal 20/18 MG maximum
vertical 20/18MG maximum
12.Noise level in car 48dbA max.
13.Noise level in machine room 62dbA max.
at 1m from machine
14. Door noise level while closing and 52dbA max. opening at a
distance of 1mtr. from car door and 1.5 mtr. from floor level.
15. Automatic Rescue Device
For Intern & PG Hostel Girls
-
Furnitures
Overall Sizes: (L)2268 mm X ( W)922 mm X (H) 610 mm
Description: Sheet Bed should be a plain bed used in the recovery
ward.
Material Specifications: Under Structure has a Higher diameter tube
which should provide a sturdy understructure.
Lying surface area of CRCA
Finish Specifications: Head Board/Leg Board should be made of frame
MS ERW RoundTube of sections Ø19, Ø25.4& Ø31.75mm, of
thickness1.6 mm
Provision for mounting of IV Pole and Mosquito Net pole should be
Hospital present
sheet Patient Finish Specifications: Powder coating should be Bacteriostatic and
Bed thermosetting epoxy Polyester, formulated to fulfill the requirements
52 Each 40 -
Type - III for bacterial protection.
with All powder coated parts in RAL white
mattress Performance Specifications: Maximum patient load should be 135 kg
Thickness-Mattress: 3"+
SANDWITCH CONSTRUCTION: Round corners - YES
Hitlon thickness ( MM): 60
Hitlon density (Gm/dcm3): 23
Coir(Both side) Thickness MM: 20
Density (Gm/dcm3): 70, DRC (%): 22
QUILTING - COMBINATION / LAYERS:
Pilled Foam – Quilting (One Side) Thickness MM - 14
Pilled Foam Density Gm/dcm3 - 18
PU foam / EPE sheet side walling Thickness MM - 3
Single Function bed which has an adjustable backrest and a fixed lower
section.
Overall Size in mm : 2268 (L) x 922 (W) x 610 (H)
Material Specification :
1. Bed Frame made from (a) MS ERW Rect. Tube of section 30mm x
60mm and thickness 1.6 mm (b) MS ERW Round tube of section 30 mm
x 30 mm and thickness 1.6 mm.
2. Laying Surface Frame made from MS ERW Round Tube of section Æ
25.4mm and thickness 1.6 mm.
3. Head Board/Leg Board Frame made from MS Round Tube of section
Patient Bed Æ19, Æ25.4 & Æ31.75 mm and Thickness 1.6 mm with Higher diameter
Type - I tube provides a studay understracture.
53 (Semi 4. Lead Screw EN8 ACME 6 MM Pitch Thread Rolled En8 Lead Each 54 -
Fowler) with Screw,with ACME thread and 6mm pitch gives good strrength, with
mattress ease of opreation.
5. Handle PPCO Snap Locking Handle lever with handle body keep it in
folding position when not use.
6. Lying Surfaces CRCA 1.0 mm Laying Surface area consists of mattress
ratainer to define the position of the mattress.
7. Castors High endurance metal series castor and provided with dual
locking arrangement are diagonally placed wheel Dia 125mm & Stem
dia is 22mm. Diagonal locking provides better s stability to bed in the
locked position.
8. Mosquito Net Ple Holder: Privision for mounting of mosquito net
pole.
9. IV Pole Holder: Provision for mounting of IV pole
The examination table should be made of sturdy structure with a
ratchet mechanism for tilting the backrest .Over all dimension
examination
:1830mm(L)X600mm(W)X850mm(H).Leg frame made of MS ERW tube
54 couch Type - Each 2 -
.Leg shoew made of nylon and lying surface of MS Sheet .Ratchet of
II
MS plate .Finishing of powder coating of wpoxy polyester .Max patient
weight :135 Kg.
Slotted Angle Racks : Slotted Angle Rack: Height 6 feet, Width 3 feet,
Depth 18 inches (448 mm ) , Load per Level 100 kg UDL, 5 Panels per
unit. Open type Rack.The Multiflex system consists of : - Angle,Decking
Panel,Corner plate,Nuts & Bolts. Angles: Material Specs of Angles is as
per IS 10748. The thickness of the angles when made from sheet steel
shall be 1.6 mm. Angles shall be of rolled formed construction and free
from twist, sharp edges and burrs. Angles shall have holes provided at
a pitch of 19.05mm. The holes shall start at 19 mm centers from each
end.Size of the Angles should be 35 mm x 35 mm x 1.6mm Panels:
Material specs IS 10748 / IS5986- Fe 410 Panels will be 6 bend panels
and shall be made from mild steel sheets not less than 0.8 mm in
Slotted thickness with lipped flanges. Width of flange being 31mm and depth
55 Angle Rack of lip 17mm. The panels will have 9mm holes for corner plates.Size of Each 10 -
Type -I the Panels is 905 W x 371 D x 0.8 mm thk. Will have 6 bends & get
bolted to the Angles at each of the four corners according to Minimum
of 100 Kg load per level. Corner Plates (Gussets): Material Specs IS
513D.8 Corner Plates, four on each face shall be fitted to the open type
rack. Four corner plates shall be fitted to the front face in case of
closed type racks. They shall be made of mild steel sheet and be
provided with a black powder coated finish. Corner Plates of 1.6 mm
thickness to be provided for ensuring rigidity of the structure. Nuts &
Bolts:All fasteners like nuts, bolts, clips etc shall be supplied in
galvanised condition for protection against environment and corrision
Overall dimension should be 485mm(L)X335mm(W)X210mm(H).It

should be made up of MS 19mmX19mm section of thickness 1.2 mm.
Stool top should be made up of MS of thickness1.2mm.steps should be
provided with rubber Mat which is made of natural rubber of thickness
3.2mm.maximum safe work load should be 135 kg.To ensure good
Foot Step quality welding " Co2 Argon" process should be adhered to. All metal
56 components should be pre treated with zinc phosphating in 9 tank Each 2 -
Type -1
process and then powder coated with anti microbial epoxy polyester
powder coating .proof loading test, cycle tests, impact test, horizontal
& vertical load tests for side rails, salt spray test, castor break test, pull
test for head and foot board. The manufacturer should compliant with
CE certification.
SS 304 sheet should be used at top for the placement of the

instruments being used & also for easy portability.SS 304 sheet should
be at the top as well as bottom shelf for keeping the instrument being
used. Horizontal bars should be welded with legs to provide protection
Instrument at sides with supporting legs for sturdy structure. Castors of 125mm
57 Trolley Type - Dia. should be used for easy in movement. Spin section should be Each 2 -
1 provided to the bowl giving a aesthetic look & also bucket should be
provided with removable lid & a handle to lift the bucket. Overall
Dimension must be 1232mm X 531mm X 915mm H. 10 Kg/shelf and 5
Kg for bowl and bucket
Overall Size 902mm(L)X532mm(W)X915mm(H).Top Shelf should be

made of SS 304 Sheet of 1 mm thick. Supporting legs made of SS304
tube section 30.30 mm dia.of 1.2 mm thick provided to suppoort the
entire structure.SS 304 tube provided at the bottom for placement of
Medicine
instument being used .Handle made up of SS 304 tube of dia dia 16
58 Trolley Type Each 8 -
mm and thickness 1.2 mm provided to handle trolley .and maneuver
-I
accordingly. High Endurance anti static plastic Injection Moulded
castors of 125 mm dia.SS should be finished in glossy mirror finish. Max
load capacity of 10 kg/shelf UDL
MS Oxygen cylinder trolley suitable for B type oxygen cylinder. The
overall dimension should be 410 mm (L) x 375 mm (W) x 1112 mm
(H).The main frame should made of 25.4 mm dia 1.6 mm thick ERW
Oxygen
tube with 10 mm dia ms made locking rod to keep the cylinder position
Cylinder
59 during transit. The trolley should be provided with 100 mm dia 25 mm Each 4 -
Trolley
thick PU wheel for longer durability. LDPE made leg bush should be
Type -I
provided on the legs. Max load bearing capacity should be 50 kg.
Overall Sizes Diagonal Leg Dia 538 mm H470 min-655max.SS 202

made sheet with spin section of thickness 1mm & should be non
corrosive. It should have a diameter of 305mm,seat base is made of MS
ring and rectangular tube.EN8 Screw having dia of 22 mm should be
used for height adjustment of the seat base.The hub should be made
of MS ERW tube having dia of 38mm and thickness 2 mm. The Hub
should be welded with the legs and it should accommodate and cover
Round Stool the lead screw mechanism.The understructure should consist of 4 legs
60 Each 15 -
Type -I made up of MS ERW tube of diameter 25.4 mm and 1.6mm thick. The
press formed pipe leg should give a round & clean look. All the legs
should be provided with 4 nos of Nylon-6 bush.All metal components
should be pre treated with zinc phosphating in 9 tank process and then
powder coated with anti microbial epoxy polyster powder coating . All
welding should be Co2 argon welding to minimise rusting on the
welding areas.Safe working load must be 135kg
2005mm(L)X666mm(W)X827mm(H).The trolley should be made of

31.75 and 25.4 mm dia 1.6 mm thick ERW tube.holder for stretcher
should be made up of mild steel.Castor should be of 200 mm dia ,
diagonal locking castor.stretcher should be made up of ERW tube of
dia 25.4 mm and thickness 1.6 mm.Top sheet should be made of CRCA
sheetof thickness 1.2 mm with contour shape to accommodate
Strecher on patient.IV pole holder should be made of MS .Maximum safe work
61 Trolley Type - load should be 135 kg.To ensure qood quality welding " Co2 Argon" Each 4 -
I process should be adhered to. All metal components should be pre
treated with zinc phosphating in 9 tank porcess and then powder
coated with anti microbial epoxy polyster powder coating.goods
should be supplied in knocked down construction to reduce carbon
emission. Performance Test :proof loading test , cycle tests , impact
test, salt spray test, castor break test,The manufacturer should
compilant with ISO 9001, 14001, 13485, OHSAS 1800 and CE
certification.
S/F/F Executive Table
Main Desk should be of dimesion : 1350w X 750d X 750h.The table top
should be in white cedar, side panels in black, while the modesty
panel in a combination of black & white cedar. Side Panels : (Black)
Made form 18mm thick PLT with PVC lipping.
Doctor Desk Modesty Panel : Made form 18mm thick PLT with PVC lipping. Bigger
62 upper panel in Black and smaller lower panel in white Cedar. Each 2 -
Type -X
Made from 18mm thick PLT with PVC lipping. Mobile Pedestal : One
Box and one Filing drawer with 18mm thick PLB fronts and top.
Handles : Black Powder coated Die cast Aluminum alloy handles.
Mobile Pedestal and HDU are fitted with central Lock.
S/F/F Executive Chair (Make IKEA/HERMAN

MILLER/GODREJ/HAWORTH)
1) SEAT/BACK ASSEMBLY: The seat and back are made up of 1.2 cm.
thick hot-pressed plywood, upholstered withfabric upholstery covers
and moulded Polyurethane foam. The back foam is designed with
contoured lumbar support for extra comfort. The seat has extra thick
foam on front edge to give comfort to popliteal area.
HIGH BACK SIZE : 47.5 cm (W) x 69.5 cm (H) SEAT SIZE : 47.0 cm. (W) x
48.0 cm. (D) 2) POLYURETHANE FOAM: The Polyurethane foam is
moulded with density = 45 +/-2 kg/m 3 and Hardness = 20 +/- 2 at
25% compression. 3) ARMRESTS: The one-piece armrests are injection
moulded from black Co-polymer Polypropylene. 4) CENTER TILT
63 Chair Type III Each 2 -
SYNCHRO MECHANISM : The mechanism is designed with the following
features: · 360 revolving type. · Upright position locking. · Tilt
tension adjustment. · Seat/back tilting ratio of 1:3 (60 seat tilt/180
back tilt). 5) PNEUMATIC HEIGHT ADJUSTMENT : The pneumatic height
adjustment has an adjustment stroke of 12.0 cm. 6) TELESCOPIC
BELLOW ASSEMBLY : The bellow is 3 piece telescopic type and injection
moulded in black Polypropylene. 7) PEDESTAL ASSEMBLY : The
pedestal is injection moulded in black 30% glass-filled Nylon and fitted
with 5 nos. twin wheel castors. The pedestal is 66.0cm pitch-center dia.
(76.0 cm with castors.)
8) TWIN WHEEL CASTORS : The twin wheel castors are injection
moulded in Black Nylon.
S/F/F Visitor Chair (Make IKEA/HERMAN MILLER/GODREJ/HAWORTH)

1) SEAT/BACK ASSEMBLY: The seat and back are made up of 1.2 cm.
thick hot-pressed plywood, upholstered with fabric upholstery covers
and moulded Polyurethane foam. The back foam is designed with
contoured lumbar support for extra comfort. The seat has extra thick
foam on front edge to give comfort to popliteal area. MID BACK SIZE :
Visiter Chair
64 47.5 cm. (W) x 58.0cm. (H) SEAT SIZE : 47.0 cm. (W) x 48.0 cm. (D) 2) Each 24 -
Type V
POLYURETHANE FOAM: The Polyurethane foam is moulded with
density = 45 +/-2 kg/m 3 and Hardness = 20 +/- 2 at 25% compression.
3) ARMRESTS: The one-piece armrests are injection moulded from
black Co-polymer Polypropylene.
4) TUBULAR FRAME : The powder coated tubular frame is cantilever
type & made of dia 25.4mm x 2mm thk M.S. ER.W. Tube.
S/F/F Storage
Steel Almirah Plain (4S) of Size: 916 mm (W) x 486 mm (D) x 1981 mm
(H). Construction & Material § Welded construction. § 0.8 mm thk
CRCA for Back, Shelf & 0.9 mm thk CRCA for all other components.
Storwell Configuration (Door) § Full height Steel Hinged Door. Locking & handle
almirah, : · Mazak Handle. § 3 way locking mechanism with shooting bolt
65 Each 5 -
Cupboard arrangement. Shelving : · Height wise Adjustable Shelf Mounting·
Type -II Uniformly Distributed Load Capacity per each full shelf is 80 Kg
maximum· Plain 4S : 4 Nos. of Adjustable Full Shelves. Leveler § M10
Screw type leveler with hex plastic base. Finish § Epoxy Polyester
Powder coated to the thickness of 50 microns (+/-10).
(L) 790 x (W) 600 x (H) 870mm.Foldable frame structure should be
made of section 22diax1.2mm A3 carbon steel with chrome finish.
Cross bar should be made of A3 carbon steel with section 25.4 x
1.2mm.Rear Wheel:24 inch Solid mag wheels with alloy in the rim
.Integrated handrim provide to drive the wheel chair of section
16x1.2mm A3 carbon steel with chrome finish.Front Wheel :8 inch HUB
Wheel Chair made of PA polymer and outer with solid rubber.PU molded arm rest &
66 base should be made of ABS for better arm support .Leatherite strap Each 4 -
Type - I
for calf rest & leatherite cushion for seat.Adjustable alluminimum die
cast foot rest with updown & swivel type mechanism.Handles should
be made of moulded rubber grip to push the wheelchair.Hand brakes
should be provided to lock the wheelchair at desired location.Foot
PressExtended base with molded plastic for better grip.Anti rust
chrome finsh. safe work load of 100 Kg
S/F/F Waiting Chair

Overall Size of 3 Str Lounge Seating: 1695(W) x 638(D) x 785(H) . Seat
height is 44.1 cm Cross Beam: It is made up of black powder coated
rectangular M.S.E.R.W tube having 8.0+-0.03 cm x 4.0 +-0.03 cm x 0.2
Three Seater +-0.014cm size. Leg and armrest: It is chrome plated made of cold
67 Chair rolled steel with 0.12+-0.013 cm thickness. Seat/Back sheel: It is Each 40 -
Type -XIV powder coated perforated shell made from cold rolled M.S.Sheet
(DIN1623 Part 1 ST-12 Grade) 0.14 +-0.013 cm thickness. The seat has
a front waterfall edge model to provide propetial clearence for
comfortable seating.The leg assembly is fitted with shoes and levellers
in Nylon.Side Table Assembly is made of 0.12 cm CR steel structure.
Chair of Over all size: 58.0cm (W) x 56.5cm (D) x 87.5cm (H) & 48.0cm
(SH)
SEAT/BACK ASSEMBLY: The seat and back are made from chemically
treated and seasoned wood, upholstered with plywood, black leather-
cloth, and U-foam.
*BACK SIZE: 46.0cm (W) x 27.0cm (H).
Staff Chair *SEAT SIZE: 46.0cm (W) x 40.0cm (D).
68 Each 50 -
Type I ARMREST TUBE: The armrest tube is made of M.S. E.R.W. tube dia.
2.54cm. (1”) x 16BG thick and powder coated.
ARMREST: The armrest is gas-assisted injection moulded from black
Polypropylene.
UNDERSTRUCTURE ASSEMBLY: The understructure assembly is a
cantilever type frame made of dia. 2.54cm. (1”) x 14BG. thick M.S.
E.R.W. tube and powder coated.
Low height electrically operated Minor Operation Table with the
following Speficifations:
Overall Length 1800mm & Width 560mm
Mattress Support Section Sizes: Headrest section size- 485x260x40
mm, Back rest section size- 505x430x40 mm, Pelvic section size-
510x500x40 mm, Pelvic Extension section size- 510x310x40 mm, Dual
joint leg rest section size- 665x245x40 mm
Base foot print: Length -900mm, Width-530mm / 380mm & Height-
145mm
Ground clearance: 10mm (unlocked position), Mattress thickness:
40mm
Functional Specification: 1. Height adjustment - 730mm to 1020mm
69 OT Table from Floor to mattress Top (Motorised), 2. Each 0 -
Trendelenburg/Rev.Trendeleburg - 30˚ / 30˚(Motorised), 3. Lateral tilt -
21˚ / 21˚(Motorised), 4. Back rest (Up / Dn - from Horizontal) - 70˚ UP/
50˚ DN (Motorised), 5. Leg rest - Flat, 6. Head rest (Up / Dn - from
Horizontal) - 45˚ UP/ 45˚ DN (Manual), 7. Leg rest abduction (Left /
Right) - 0˚ - 90˚ (Manual), 8. Maximum patient Load - 200 Kgs, 9. Power
supply - 220 V, 5 Amp, 50 Hz, 10. Battery Back-up - Provided fitted with
OT table as emergency power back for resetting the positions., 11.
Lithotonomy crutches-Adjustable along Rod Axis, Rotation 360˚ around
road Axis, Crutch pad adjustable in swivel joint.
Material Specification: 1. Base Assembly - Aesthetically and
scientifically designed T-Shape Heavy structure made of Ms Sheet flat
and MS Casting with Zinc plating finish., Base is counter balanced for
stability and structure is cover with 1.6mm thick SS 304 Fabricated
Paediatric Bed of Overall Sizes in mm: 1500 (L) x 850 (W) x 1210 (H)
Flat single section bed with grille frame on 4 sides.
Suitable for children up to 12 years.
Drop down grill frame on both sides for protection of the patient.
Material Specifications: Under Structure has a Higher diameter tube
which should provide a sturdy understructure.
Lying surface area of CRCA
Paediatric Finish Specifications: Head Board/Leg Board should be made of frame
70 Bed without MS ERW RoundTube of sections Ø19, Ø25.4& Ø31.75mm, of Each 6 -
Mattress thickness1.6 mm
Provision for mounting of IV Pole and Mosquito Net pole should be
present
Finish Specifications: Powder coating should be Bacteriostatic and
thermosetting epoxy Polyester, formulated to fulfill the requirements
for bacterial protection.
All powder coated parts in RAL white
Mattress for Paediatric Bed of Overall Sizes in mm: 1415 (L) x 785 (W) x
75 (H)
FOAM Density: 40±2 kg/m3 &
Mattress For
Hardness in Kg: 45±2 as per IS:7888 for 25% Compression.
71 Paediatric Each 6 -
UPHOLSTRY
Bed
Stitched Upholstry Cover Material: Helium Heavy A/F F/R SM
Color: Navy Blue (350 GSM, 0.45 THK) with Fire Retardent and
Antimicrobial Properties
Baby Crib on Trolley with Castors
Overall Size L - 865 mm x W - 508 mm x H - 771 mm
72 Infants Crib Each 4 -
Material Specification MS E.R.W. Tube
Castors High endurance Plastic injection moulded castors
Mattress for Crib 50mm thick.
FOAM Density: 40±2 kg/m3 &
Mattress For
73 UPHOLSTRY Each 4 -
Crib
Ht 850 mm SS bowl MS tubular frame of dia 25.4 X1.2 mm tube work
Basin Stand
74 mounted on three 50 dia.Non rusting castors all without brack. SS part Each 10 -
Type I
finished with matt polish
Overa all dimension of the bucket should be 517 mm (L) x 517 mm ( W)
x 210 mm H. It should made of 12.7 mm dia and 1.6 mm thick ss 304
Kick Bucket ring. The bowl should be ss made of .8 mm thck .
75 Each 10 -
Type -I 3 nos 50 mm dia high endurance plastic injection moulded castors
should be provided for the movement.
mx load bearing capacity should be 10 kg.
overall dimensions of 900mmWx 1990mmHx450mmD and should have
transparent doors and sides with steel frame work. Transparent
portion of this cupboard should be made of Acrylic of 4mm thick. This
INSTRUMEN cabinet should have 5 adjustable acrylic shelves each of 6 mm
76 T Cabinet thickness. Three way lock should be provided of 6 levers. In the front Each 5 -
Type -I door there should be 4 acrylic sheets and 2 each on both the sides.
Metal used should be of CRCA and powder coated for finish. To be
provided with rubber shoes to prevent direct contact of cabinet and
floor.
Desk: clean matt PU finish 18 mm thick inside radius :700 mm , outside
radius 1350 mm depth 560 mm.Frosted Glass 10mm thick Diamond cut
finishing on edges Inside Radius – 1202.5mm Outside radius –
1402.5mm Depth – 200mm
Reception Modesty Panel :MS Perforated sheet Below Worksurface : 0.8 mm
77 Table Type (thick) x 665.0 Each 1 -
-I mm (height) x 1345.0 mm (flat length) Above Worksurface : 0.8mm
(Thick) x 260
mm (height) x 1345.0 mm (flat length) Legs :MS tube 1.6 mm thick
Diameter 50.8 mm
Height 604 mm
Computer Table of Overall Size- (1200 x 600 x 750)mm.

Computer Raw Material (specs of laminations & thickness):18mm Prelam Particle
78 Table Board, 3mm Prelam MDF Board, Metal Parts: 1) BM Slide for Keyboard, Each 5 -
Type -XXIV 2) Castor Mounting Plate, 3) Locking Bracket, 4) Angle Clit.
Construction: KD fitting , Wooden Dowel & Angle Clit.
S/F/F Executive Table
Table:Top 25 mm thick plain particle board clad with 0.6 mmthick post
formed laminate and 1 mm thick backing . Modesty: 18 mm thk plain
particle board clad with 1 mm thk decorative laminate on both sides
Suprintende Size:1500X750X740 ERU: Size:1550X450X705 : 25 mm thk PPB clad
79 nt Desk with 0.6 mm thkpost formed laminate and 1 mm thk backing Laminate Each 1 -
Type -VII . Modesty: 18 mm thk ppb clad with 1 mm thk decorative laminate
Hinge Door Unit:Size1280(W)X425(D) X705mm(H). 25 mm thk PPB clad
with 0.6 mm thkpost formed laminate and 1 mm thk backing Laminate
. Modesty: 18 mm thk ppb clad with 1 mm thk decorative laminate
S/F/F Executive Chair

The seat should be made up of 1.4 mm thick hot pressed plywood
upholstered with fabric and moulded polyurethane foam . Seat Size :
49.5 cm X51.8 cm D.Back should be injection moulded in glass filled
polypropylene which is upholstered with mesh fabric .the back consist
Chair of adjustable lumber support made of injection moulded
80 Each 1 -
Type -XI polypropylene . Back size: 44.5 cm X57.5 cm .Ht adjustable armrest
mde of polypropylene should be present . 360 deg revolving synchro
tilt mechanism 4 position locking with option of variable tilt angle
should be given . Pneumatic ht adjustment and twin wheel castors
should be provided . Head rest of injection moulded polypropylene
should be present
Height adjustable saline stand should be mounted on 4 pronged castor
base,base circle should have dia of 695 mm and stand ht should be
adjustable from 1568 mm to 2121 mm.Stand should be combination of
fixed and adjsutable tube. Fixed ms tube should be with 31.75mm dia
1.6 mm thick and telescopic ss tube should be 19mm dia 1.6 mm thich
ss 304 made. The height of the SS telescopic tube should be adjustable
by ms toughened nickel plated knob.The stand shoul have 4 nos 8 mm
Saline Stand dia ss hooks for holding saline bags, maximum safe working load
81 should be 3 kg per hook.base frame should be mounted on 50 mm dia Each 100 -
Type -I
4 nos high endurance anti static plastic moulded castors provided with
digonally lockable.All metal components should be pre treated with
zinc phosphating in 9 tank porcess and then powder coated with anti
microbial epoxy polyster powder coating.Powder coating should be
antimicrobial and thermosetting epoxy polyester,formulated to fulfill
the requirements for bacterial protection.
Delivery Table of Overall Size: 2030L x 960W x 800H (mm)

Mattress supports section sizes: Back rest - 760 x 640 mm, Pelvic - 360
x 640 mm, Leg rest - 680 x 640 mm, Mattress thickness: 50mm
Fucntional Specification: 1. Mattress plateform height - 800 mm, 2.
Trendelenburg / Rev.Trendeleburg - 10°/ 15° adjustable on lead screw
crank mechanism for safer function., 3. Back rest - 50° adjustable on
ratchet, 4. Leg rest extension - Extended Length - 850mm, Contracted
length - 680mm., 5. Maximum patient Load - 120 Kgs, 6. Lithotonomy
crutches - Adjustable along Rod Axis, Rotation 360˚ around road Axis,
Crutch pad adjustable in swivel joint, 7. IV pole adjustability - IV pole
can be adjusted from 800 mm to 1000 mm.Adjustability range 200
mm.
Delivery Material Specification: 1. Understructure - SS 304, ERW tube - section
82 Each 4 -
Table size -50 x 25 x thickness- 1.2mm, 2. Mattress support platform - Frame
made of SS304 ERW tube of dia 20x20x1.2mm thickness and SS 304
sheet of 1.2mm thickness, 3. Side rail and Head rail - SS 304, ERW tube -
section size-dia 16x1.2 mm thick. 4. Matress - Polyurethane foam,
Mattress cover - Rexin., 5. Leg shoe - Material - nylon , Color - black. 6.
Crutches - Lithotomy crutches made of SS 304 Rod and molded
polyurethane with ergonomic calf rest profile to suit the Operation
table application., 7. IV pole - Material SS304 ERW tube,Bigger tube dia
- 19 mm thickness - 2.5 mm,Telescopic tube dia - 14 mm, SS304 Hook
rod dia - 8 mm., 8. Collection tray - Material - SS304,Size: 460L x 410W
x 100 mm H
Finish Specification:
1. All SS parts - Glossy buff finish
Over all dimension :402mmLX422mm WX840mm Ht .locker should
have one cabinet and one drawer unit .both provided with CAM lock
.there should be gap between drawer and unit to keep general items
Bed Side
83 for frequesnt use castors are provided for easy handling .drawer made Each 100 -
Locker Type I
up of CRCA sheet 1 mm thick and has ball slide for easy operation .Top
SS 304 sheet 0.8 mm thick castors 50 mm dia ,Hamdle ABS ..powder
coating of epoxy polyester
ICU Bed having four function with high low, backrest & knee rest
functions powered by means of three actuators. The fourth function of
trendelenburg can be adjusted with manual crank.
Overall Sizes (in mm): 2312L X 1060W X Adjustable from 490-770H
Lying Surface: Sheet metal Lying surface of 1.2mm thickness.
Lying surface area consists of mattress retainer to define the position
of the mattress.
Castors: High endurance Plastic injection molded castors with dual
locking arrangement diagonally placed. Wheel Dia. 125mm & Stem dia
is 22mm.
84 ICU BED Diagonal locking provides better stability to bed in locked position. Each 6 -
Mattress: 4 Section Mattress 100mm thk for ICU Bed.
FOAM
Density: 40±2 kg/m3 &
UPHOLSTRY
LAB TABLE -
Island Table -01 of size 2325 mm W X 1540 mm D with 1 nos. of
Island Table -
85 reagent rack & 1 nos. of sink. (For details refer Technical EACH 1 -
01
Specification).
Island Table -02 of size 3830 mm W X 1540 mm D with 2 nos. of
Island Table -
86 reagent rack & 2 nos. of sink. (For details refer Technical EACH 1 -
02
Specification).
Wall Sided Lab Table of size 2330 mm W X 770 mm D with 1 nos. of
Wall Sided
87 reagent racks & 1 nos. of Sink. (For details refer Technical EACH 1 -
Lab Table
Specification).
Partition Screen-
Three fold screen is a portable screen on castors having three screens
which can be folded to provide privacy.
Overall Sizes (L)2637 mm X ( W)640 mm X (H) 1720 mm
Material Specifications
1 Fix Frame - Made from E.R.W Tube of Section Ø25.4 having Thickness
1.2 mm (To provide hinging to movable frame)
2 Movable Frame - Made from E.R.W Tube of Section Ø19.05 having
Thickness 1.2 mm (Flexible frame has plastic hinge. It can be adjusted
Partition in provided space)
88 Each 15 -
Screen- 3 Leg Frame - Made from E.R.W Tube of Section SQ. 30 having
Thickness 1.6mm
4 Caster Wheel - Of Section Ø50 (For Ease of movement)
5 Bush For Holding Pipe - Made from Nylon 6 (Plastic bush)
6 Screen - Casement fabric for screen which is opaque for providing
modesty.
Finish Specifications
1 Powder coating - Epoxy polyester.
2 Color - Powder coated parts in RAL white, Plastic parts in Gray
(Pantone cool gray 8C), Casement fabric in green (RAL 6026)
TOTAL IN FIGURE 0.00
TOTAL IN WORD

BOQTibbiCollege

Uploaded by

Copyright:

Available Formats

BOQTibbiCollege

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

BOQTibbiCollege

Uploaded by

Copyright:

Available Formats

CONSTRUCTION OF 100 BEDED PRE FAB HOSPITAL AT 3rd FLOOR TIBBI COLLEGE PATNA, BIHAR.

SN Ref Description Unit Quantity Rate Amount

15.7 Demolishing brick work including stacking of serviceable material

5.33.2 All work above Plinth level upto floor V Level. -

Providing and laying autoclaved aerated cement blocks masonry with

HALF BRICK MASONRY -

a 21.1.1 For fixed Portion -

a 9.127.2 1.0 mm thick. sqm 148.31 669.00 99,216.05

9.124.1 Non decorative finish sqm 36.96 2898.90 107,143.34

a) 9.100.1 125 mm each 88.00 57.10 5,024.80

21.3 Providing and fixing glazing in aluminium door, window, ventilator

a) 11.26.1 20 to 25 mm thick sqm 31.00 1252.70 38,833.70

a) 11.41.2 Size of Tile 60x60 cm sqm 1473.00 1638.80 2,413,952.40

PAINTING AND FINISHING WORK -

56 26.41 Designing, providing, installing and fixing factory finished custom

The frame can be supplied in panelized or knock down condition in

68 17.34 Providing and fixing toilet paper holder :

18.51.1 15 mm nominal bore Each 6 708.40 4250.40

18.22.2 150 mm dia. Each 6 190.10 1140.60

78 17.7A Providing and fixing wash basin with C.I. brackets, 15 mm

18.21.2.1 45 cm length. 15 mm nominal bore Each 36 85.20 3067.20

Soil, Waste, Vent & Rain Water Pipes

a 17.56.1.2 100 mm Each 12 439.70 5276.40

a 17.65.1 100 mm diameter pipe Metre 125 46.10 5762.50

106 Fire 11 Supplying, fixing, testing and commissioning of butterfly valve of PN

C. FIRE FIGHTING ITEMS -

Supplying and fixing first-aid Hose Reel with MS construction spray

Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm

Supplying, fixing, testing and commissioning of butterfly valve of PN

Providing, laying, testing & commissioning of 'C' class heavy duty MS

Providing, fixing, testing & commissioning of 15mm dia uartzoid bulb

Providing & fixing of pressure switch in M.S. pipe line including

Supplying, installation, testing & commissioning of sprinkler flexible

Providing, installation, testing & commissioning of adjustable rosette

A CIRCUIT CUM POINT WIRING

Wiring for group controlled (looped) light point/fan point/exhaust

Supplying and fixing following modular switch/ socket on the existing

Supplying and fixing following modular type switch/socket o the

Supplying and fixing following modular type switch/socket o the

Supplying and fixing following size/modules G.I. box along with

Installation, testing and commissioning of ceiling fan, including wiring

Supplying and drawing following pair, 0.5 sq.mm FR PVC insulated

Sl.No.1.17 Supplying and drawing Construction of co-axial TV cable RG-6 grade

C CABLES, MAINS AND SUB MAINS

11 kV LT CABLE END TERMINATION

Sl.No.3.6 Earthing with copper earth plate 600 mm x 600 mm x 3 mm thick

Sl. No. Providing and fixing 25 mm x 5 mm copper strip on surface or in recess

Supplying and fixing indoor recess mounting decorative mirror optic

H DSR-17.2 INTELLIGENT FIRE ALARM SYSTEM

Supplying, installation, testing & commissioning of repeater

Supplying, installation, testing & commissioning of intelligent

Supplying, installation, testing & commissioning of response

Supplying, installation, testing & commissioning of

Supplying, installation, testing & commissioning of

Supplying, installation, testing & commissioning of

Supplying and fixing of following sizes of medium class PVC conduit

183.1 DSR-1.21.2 25 mm dia conduit RM 34 90 3024

Supplying, installation, testing & commissioning of fire fighter

NON SCHEDULE ITEM