Boqitibakhri

BILL OF QUANTITY
BUILDING DIVISION BEGUSARAI.

Name of Work - Construction of I.T.I. Building, Bakhri (Begusarai.)
Amount
Sl. Description of work (Rs.)
No.
1 Civil work 203121879.00
2 Plumbing work 9540497.00
3 Fire fighting work 8711345.00
4 Furniture work 19372349.00
5 RWH 853630.00
6 Electric Work 13295564.00
Total Amount 254895264.00
Earnest Money :- 3549000.00
Cost of B.O.Q :- 10000.00
Time of Completion :- 18 Months
Last Date of Bid 21.11.2022
submission :-
S.O.R
S.N. Description of Items QUANTITY UNIT RATE AMOUNT
CODE NO.
1 2 3 4 5 6 7
Earth work in excavation in foundation trenches orrains(not exceeding
1.5 m in width or 10 sqm on plan) including dressing of sides and
ramming of bottoms, lift upto 1.5 m . including getting out the Cubic
1 2.8.1 6622.74 360.70 2388822.32
excavated soil and disposal of surplus excavated soil as directed, Meters
within a lead of 50 m. All Kinds of soil
Filling available excavated earth (excluding rock) in trenches, plinth,

sides of foundations etc. in layers not exceeding 20 cm in depth: Cubic
2 2.26 consolidating each deposited layer by ramming and watering lead 24627.03 123.90 3051288.65
Meters
Supplying and Filling in plinth with local sand and under floors
including, watering, ramming consolidating and dressing complete. Cubic
3 2.28 4774.68 287.30 1371766.14
Meters
Providing designation 100 A one brick flat soling joints filled with
local sand including cost of watering, taxes, royalty all complete as per Square
4 11.72 11005.06 283.30 3117733.21
building specification and direction of E/l, Meters
Providing and laying in position cement concrete of specified grade

exluding the cost of centring and shuttering-all work upto plinth level. Cubic
5 4.1.3 1:2:4(1 Cement: 2 coarse sand:4 graded stone aggregate 20 mm 535.11 3998.10 2139403.30
Meters
nominal size)
Providing and laying in position ready mixed or site batched design

mix cement concrete for reinforced cement concrete work; using
coarse aggregate and fine aggregate derived from natural sources,
Portland Pozzolana /Ordinary Portland /Portland Slag cement,
admixtures in recommended proportions as per IS: 9103 to
accelerate /retard setting of concrete, to improve durability and
workability without impairing strength; including pumping of concrete
to site of laying, curing, carriage for all leads; but excluding the cost of
centering, shuttering, finishing and reinforcement as per direction of
the engineer-in-charge; for the following grades of concrete. Note:
Extra cement up to 10% of the minimum specified cement content in Cubic
6 5.33.1.1 2043.03 5063.40 10344673.04
design mix shall be payable separately. In case the cement content in Meters
design mix is more than 110% of the specified minimum cement
content, the contractor shall have discretion to either re-design the mix
or bear the cost of extra cement. All works up to plinth level oncrete
of M-25 grade with minimum cement content of 330 kg/cum
Page 1 of 65
S.O.R
CODE NO.
1 2 3 4 5 6 7
Providing and laying in position ready mixed or site batched design
mix cement concrete for reinforced cement concrete work; using
coarse aggregate and fine aggregate derived from natural sources,
Portland Pozzolana /Ordinary Portland /Portland Slag cement,
admixtures in recommended proportions as per IS: 9103 to
accelerate /retard setting of concrete, to improve durability and
workability without impairing strength; including pumping of concrete
to site of laying, curing, carriage for all leads; but excluding the cost of
centering, shuttering, finishing and reinforcement as per direction of
the engineer-in-charge; for the following grades of concrete. Note:
Extra cement up to 10% of the minimum specified cement content in Cubic
7 5.33.2.1 2590.13 5863.20 15186432.63
design mix shall be payable separately. In case the cement content in Meters
design mix is more than 110% of the specified minimum cement
content, the contractor shall have discretion to either re-design the mix
or bear the cost of extra cement. All work above Plinth level upto floor
V Level. Concrete of M-25 grade with minimum cement content of
330 kg/cum
Reinforcement for R.C.C. work including straightening, cutting, Kilogram

8 5.22.7A bending, placing in position and binding all complete. 8 mm dia 154934.58 94.50 14641317.81
s
9 5.22.7B bending, placing in position and binding all complete. 10 mm dia 100524.03 92.60 9308525.18
s
10 5.22.7C bending, placing in position and binding all complete. 12 mm dia 136388.72 90.80 12384095.78
s
Reinforcement for R.C.C. work including straightening, cutting,
5.22.7D + bending, placing in position and binding all complete. 16 mm dia to 25 180274.45 Kilogram
11 91.70 16531167.07
5.22.7F mm dia s
Brick work with fly ash bricks as per IS 12894(2002) & IS 3495 in
foundations and plinth in : Cement mortar 1:6 (1 cement: 6 coarse sand Cubic
12 6.1.14C 566.16 4923.00 2787205.68
) Meters
foundations and plinth in : Cement mortar 1:6 (1 cement: 6 coarse Cubic
13 6.1.14C + 6.3C sand ) Extra tor Brick work in superstructure above plinth level upto 1581.87 5765.20 9119796.92
Meters
floor V cum
foundations and plinth in : Cement mortar 1.:4 (1 cement: 4 coarse Cubic
14 6.1.12C + 6.3C sand ) Extra tor Brick work in superstructure above plinth level upto 551.17 5958.50 3284164.32
Meters
floor V cum
Extra for providing and placing in position 2 Nos, 6 mm dia , MS bars

at every third course of half brick masonry (with F. P. S. bricks) Square
15 6.21A 1243.62 113.60 141275.23
Meters
Centring and shuttering including strutting,propping etc. and removal

of form for. Foundations, footings, bases of columns etc. for mass Square
16 5.9.1 1817.60 211.60 384603.95
concrete. Foundation Meters

of form for. Suspended floors, roots, landings, balcnies and access Square
17 5.9.3 7811.69 437.50 3417614.38
platform. Meters
Centring and shuttering including strutting,propping etc. and removal Square

18 5.9.4 of form for. Shelves (Cost in situ) 37.78 437.50 16528.75
Meters
of form for. Lintels, beams, plinth bams, griders, bressumers and Square
19 5.9.5 9633.70 404.70 3898758.39
contilevers. Meters

of form for. Columns,Pillars, Piers, Abutments, Posts and Struts Square
20 5.9.6 8395.17 494.40 4150572.05
Meters

of form for. Stairs,(excluding landings) except spiral-staircaces. Square
21 5.9.7 485.40 439.90 213527.46
Meters
Page 2 of 65
S.O.R
CODE NO.
1 2 3 4 5 6 7
of form for. Weather shade,Chajjas, corbels etc. including edges Square
22 5.9.19 627.32 550.90 345590.59
Meters
Providing and fixing ISI marked flush door shutters conforming to IS :

2202 (Part I) non-decorative type,core of block board construction
with frame of 1 st class hard wood and well matched commercial 3 ply
veneering with vertical grains or cross bands and face veneers on both Square
23 9.21.1 faces of shutters: 35 mm thick including ISI marked Stainless Steel 371.11 1775.30 658831.58
Meters
butt hinges with necessary screws
Providing and fixing aluminium sliding door bolts, ISI marked,

anodised (anodic coating not less than grade AC 10 as per IS : 1868),
24 9.96.1 transparent or dyed to required colour or shade, with nuts and screws 271.00 Each 235.50 63820.50
etc. complete: 300x16 mm
Providing and fixing aluminium tower bolts, ISI marked, anodised

(anodic coating not less than grade AC 10 as per IS : 1868 ),
25 9.97.1 transparent or dyed to required colour or shade, with necessary screws 280.00 Each 111.40 31192.00

Providing and fixing aluminium handles, ISI marked, anodised (anodic

coating not less than grade AC 10 as per IS : 1868) transparent or dyed
27 9.100.1 to required colour or shade, with necessary screws etc. complete: 125 406.00 Each 57.10 23182.60
mm
Providing and fixing aluminium hanging floor door stopper, ISI

marked, anodised (anodic coating not less than grade AC 10 as per IS :
28 9.101.2 1868) transparent or dyed to required colour and shade, with necessary 236.00 Each 60.80 14348.80
screws etc. complete. Twin rubber stopper
Providing and fixing steel glazed doors, windows and ventilatrs of

standard rolled steel sections, joints mitered and welded with 15x3 mm
lugs 10 cm long with steel lugs embedded in cement concrete blocks
15x10x10 cm of 1:3:6(1 cement: 3 coarse sand : 6 graded stone
aggregate 20 mm nominal size) or with woodenplugs and screws or
raw) plugs and screws or with fixing dips or with bolts and nuts as Square
29 10.12.1 required, including providing and fixing of glass panes with glazing 847.40 3038.90 2575163.86
Meters
dips and special metal-sash putty pf approved make complete
including applying a priming coat of approved steel primer; excluding
the cost of metal beading and other fitting except necessary hinges or
pivots as required. Doors
Providing and fixing M.S. grills of required pattern in frames of

windows etc. with M.S. flats, square or round bars etc. including Kilogram
30 9.48.1 priming coat with approved steel primer all complete. Fixed to steel 11016.49 144.50 1591882.81
s
windows by welding
Steel work welded in built up sections/framed worK including cutting

hoisting, rixing in position and applying a priming coat of approved
steel primer using structural steel, etc. as required. In gratings, frames, Kilogram
31 10.32.2 2487.56 114.60 285074.38
guard bar, ladders, railings, brackts. gates & s
similar works.
Providing and fixing hand rail by welding etc. to steel ladder railings
& staircases railing including applying a priming coat of approved Kilogram
32 10.33.3 689.01 150.00 103351.50
steel primer G.I pipes 40 mm nominal bore (class B) s
Providing and fixing bright finished brass peg stays to steel ventilators
33 10.30.1 with necessary welding and machine screws etc. complete. 300 mm 571.00 Each 182.70 104321.70
long of minimum weight of 330 grams.
Providing and fixing bright finished brass casement window fastners
34 10.28 of minimum weight 200 gms to side hung steel windows with 571.00 Each 74.30 42425.30
necessary welding and machine screws etc. complete.
Page 3 of 65
S.O.R
CODE NO.
1 2 3 4 5 6 7
Providing and fixing in position collapsible steel shutters with vertical
channes 20x10x2 mm and braced with flat iron diagonals 20x5 mm
size with top and bottom rail of T-tron 40x40x6 mm with 40 mm dia
steel pulleys complete with bots.nuts locking arrangement stoppers Square
35 10.3 151.74 6303.40 956477.92
handies including applying a priming coat of approved steel primer. Meters
Providing 40x5 mm flat iron hold fast 40 cm long including fixing to

frame with 10 mm diameter bolts,nuts and wooden plugs and
36 9.53 embeddings in cement concrete block 30x10x15 cm 1:3:6 mix (1 582.00 Each 130.80 76125.60
cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)
Providing and fixing pressed steel door confirming IS code 4351

manufactured from commerical mild steel sheet of 1.25 mm thickness
including hinges, jamb, lock jamb, bead and if required angle threshold
of mild steel angle of section 50 x 25 mm or base ties of 1.25mm
pressed mild steel welded or rigidly fixed together by mechnical
means, adjustable lugs with split end tail to each jamb including steel
37 10.15.2.1 butt hinges 2.5 mm thick with mortar guards, lock strike-plate and 1532.53 Meters 432.60 662972.48
shock absorbers as specified and applying a coat of approved steel
primer after pre-treatment of the surface as directed by Engineer-in-
charge: Profile C Fixing with adjustable lugs with split end tail to each
jamb
Providing and fixing M.S.fan clamp type I or II of 16 mm dia.M.S. bar

bent to shape with hooked ends in R.C.C slabs during laying including
38 10.17 painting the exposed portion of loop,all as per standard design 307.00 Each 174.60 53602.20
complete.
Providing and fixing aluminium work for doors, windows, ventilators

and partitions with extruded built up standard tubular sections/
appropriate Z sections and other sections of approved make
conforming to IS: 733 and IS: 1285, fixing with dash fasteners of
required dia and size, including necessary filling up the gaps at
junctions, i.e. at top, bottom and sides with required EPDM rubber/
neoprene gasket etc. Aluminium sections shall be smooth, rust free,
straight, mitred and jointed mechanically wherever required including
cleat angle, Aluminium snap beading for glazing / aneling,C.P. brass /
stainless steel screws, all complete as per architectural drawings and
the directions of Engineer-in-charge. (Glazing, paneling and dash Kilogram
39 21.1.2.3 74.00 480.00 35520.00
fasteners to be paid for separately) : For shutters of doors, windows & s
ventilators including providing and fixing hinges/ pivots and making
provision for fixing of fittings wherever required including the cost of
EPDM rubber / neoprene gasket required (Fittings shall be paid for
separately) Polyester powder coated aluminium (minimum thickness
of polyester powder coating 50 micron)
Providing and fixing glazing in aluminium door, window, ventilator

shutters and partitions etc. with EPDM rubber / neoprene gasket etc.
complete as per the architectural drawings and the directions of
engineer-in-charge . (Cost of aluminium snap beading shall be paid in Square
40 21.3.2 75.71 1115.10 84424.22
basic item): With float glass panes of 5.50 mm thickness(weight not Meters
less than 12.50 kg/sqm)
Providing and fixing aluminium die cast body tubular type universal
hydraulic door closer (having brand logo with ISI, IS : 3564, embossed
41 9.83 on the body, door weight upto 35 kg and door width upto 700 mm), 2.00 Each 979.50 1959.00
with necessary accessories and screws etc. complete.
Page 4 of 65
S.O.R
CODE NO.
1 2 3 4 5 6 7
Kota stone slab flooring over 20 mm (average ) thick base laid over
and jointed with grey cement slurry mixed with pigment to match the
shade of the slab including rubbing and polishing complete . Base with Square
42 11.26.1 4483.34 1252.70 5616280.02
1:1:1 (1 lime : 1 surkhi: 1 coarse sand ) / 1:4 (1 cement: 4 coarse sand ) Meters
20 to 25 mm thick -
Kota stone slabs 20 mm thick in risers of steps skirting. Dado & pillars
laid on 12 mm (average (thick cement mortar 1:3 (1 cement: 3 coarse
sand ) and jointed with grey cement slurry mixed with pigment to Square
43 11.27 387.13 1334.90 516779.84
match the shade of the slab including rubbing and polishing complete. Meters
Details of cost for 10 sqm
Providing and laying Ceramic glazed floor tiles 300x300 mm

(thickness to be specified by the manufacturer) of ist quality
conforming to IS : 15622 of approved make in colours such shades
except white , Ivory , Grey , Fume Red , Brown , laid on 20 mm thick Square
44 11.38 Cement motar 1:4 (1 cement: 4 coarse sand ) including pointing the 295.57 862.40 254899.57
Meters
joints with white cement and matching pigment etc., complete.
Providing and fixing 1st quality ceramic glazed wall tiles conforming
to IS : 15622 (Thickness to be specified by the manufacture) of
approved make in all colours, shades except burgundy , bottle green ,
black of any size as approved by Engineer-in-charge in skirting , risers
of steps and dados over 12 mm thick bed of cement Motar 1:3(1 Square
45 11.36 cement: 3 coarse sand ) and jointing with grey cement slurry @ 3.3 kg 1728.88 795.00 1374459.60
Meters
per sqm including pointing in white cement mixed with pigment of
matching shade complete.
6 mm cement plaster to ceiling of mix : 1:4(1 cement: 4 coarse sand) Square

46 13.24.2 8714.01 125.60 1094479.66
Meters
Cement plaster in course sand 12 mm cement plaster of mix: 1:6(1 Square
47 13.11.4 cement: 6 coarse sand) 21596.92 141.50 3055964.18
Meters
15 mm cement plaster on rough side of single or half brick wall of Square
48 13.12.4 mix. 1:6 (1 cement: 6 coarse sand) 6485.39 162.80 1055821.49
Meters
Providing and applying white cement based putty of average thickness
2 mm, of approved brand and manufacturer, over the plastered wall Square
49 13.80.A.2 surface to prepare the surface even and smooth complete 26474.65 105.40 2790428.11
Meters
Distempering with oil bound washa ble distemper of approved brand

and manufacture to give an even shade . New work (two or more coats Square
50 13.77.2 ) over and including priming coat with cement primer 24838.37 102.30 2540965.25
Meters
Finishing walls with water proofing cement paint of approved brand

and manufacture and of required shade to give an even shade New
13.79.1 + work (three or more coats) Applying one coat of cement primer of Square
51 14123.56 119.80 1692002.49
13.78.1 approved brand and manufacture on wall surface: Cement primer Meters
Applying priming coat: With ready mixed zinc chromate yellow

primer of approved brand and manufacture on steel galvanized Square
52 13.81.3 1460.37 34.60 50528.80
iron/steel works Meters
Applying priming coat: With ready mixed pink or grey primer of

approved brand and manufacture on wood work (hard and softwood) Square
53 13.81.1 419.82 39.70 16666.85
Meters
Painting with synthetic enamel paint of approved brand and

manufacture of required colour to give an even shade: Two or more Square
54 13.94.1 coats on new work over an under coat of suitable shade with ordinary 1963.23 116.50 228716.30
Meters
pain+ of approved brand and manufacture
Page 5 of 65
S.O.R
CODE NO.
1 2 3 4 5 6 7
Forming groove of uniform size from 12x12 mm and upto 25x15 mm
in plastered surface as per approved pattern using wooden battens,
nailed to the under layer including removal of wooden battens, repairs
55 13.116 to the edges of plaster panel and finishing the groove complete as per 8589.56 Meters 47.10 404568.28
specifications and direction of the Engineer-in-Charge.
Neat cement punning Square

56 13.26 518.19 40.50 20986.70
Meters
Cement plaster in course sand 12 mm cement plaster of mix: 1:3 (1
13.11.1 + cement:3 coarse sand) Extra for providing and mixing water proofing Square
57 material in proportion recommended by the manufacturers: 12 mm 305.00 173.30 52856.50
13.36.1 Meters
cement plaster 1:3(1 cement :3 sand)
Providing and laying integral cement based water proofing treatment

including prepatation of surface as required for treatment of roofs,
balconies , terraces etc, consisting of following operations. (a)
Applying and grouting a slurry coat of neat cement using 2.75 kg/sqm
of cement admixed with proprietary water -proofing compound
cleaning the surface before treatment, (b) Laying cement concrete
using broken bricks / brick bats 25 mm to 100 mm size with 50 % of
cement mortar 1:5 (1 cement: 5 coarse sand ) admixed with proprietary
water proofing compound conforming to IS : 2645 over 20 mm thick
layer of cement mortar of mix 1:5 (1 cement: 5 coarse sand ) admixed
with proprietary water froofing compound conforming to IS 2545 to
reuired slope and treating similary the adjoining walls upto 300 mm
height including rounding of junctions, or walls ad slabs. (c) After two
days of proper curing applying a secoung coat of cement slurry
admixed with proprietary water proofing compound conforming to IS :
Square
58 22.8.1 2645. (d) Finishing the surface with 20 mm thick jointless cement 2626.89 850.70 2234695.32
Meters
mortar of mix 1:4 (1 cement: 4 coarse sand ) admixed with proprietary
water proofing compound conforming to IS : 2645 and finally
finishing the surface with trowel with neat cement slurry and making
of 300 x 300 mm square. (e) The whole terrace so finished shall be
flooded with water for a minimum period of two weeks for curing and
for final test, All above operations to be done in order and as directed
and specifed by the Engineer-in-Charge. With average thickness of
120 mm and minimum thickness at khurras point to be 65 ..
Providing 250mm wide brick drain in cement mortar (1:6) with av.
150mm. Clear depth and 250mm apron including cost of E/W.
involved with 75mm cement concrete (1:4:8) over one brick
59 6.47A designation 100-A flat soling in proper grade and slope at the base.the 648.00 Meters 1087.90 704959.20
drain duly.plastered in CM. (1:3) with punning over exposed surface
all complete as per building specification and
Providing and fixing on wall face unplasticised -PVC molded

fittings/accessories for unplasticised-PVC rain water pipes conforming
60 12.79.1.2 to (S:4985 including jointing with seal ring conforming to IS: 5382 198.00 Each 120.00 23760.00
leaving 10 mm gap for thermal expansion. Coupler 110mm
Providing and fixing water closet squatting pan (Indian type W.C.pan )
with 100 mm sand cast Iron P or S trap, 10 litre low fixtures complete,
including cutting and making good the walls andlevel white P.V.C.
flushing cistern, including flush pipe, with manually controlled device
61 17.1.1 (handle lever) conforming to IS : 7231, with all fittings and floors 57.00 Each 4470.90 254841.00
wherever required : White Vitreous china Orissa pattern W.C. pan of
size 580x440 mm with integral type foot rests
Page 6 of 65
S.O.R
CODE NO.
1 2 3 4 5 6 7
Providing and fixing white vitreous china pedestal type water closet
(European type) with seat and lid, 10 litre low level white vitreous
china flushing cistern & C.P. flush bend with fittings & C.I.brackets,
40 mm flush bend, overflow arrangement with specials of standard
make and mosquito proof coupling of approved municipal design
62 17.3.1 complete, including painting of fittings and brackets, cutting and 6.00 metre 5,504.30 33026.00
making good the walls and floors wherever required : W.C. pan with
ISI marked white solid plastic seat and lid
Providing and fixing white vitreous china flat back or wall corner type
lipped front urinal basin of 430x260x350 mm and 340x410x265 mm
sizes respectively with automatic flushing cistern with standard flush
pipe and C.P. brass spreaders with brass unions and G.I clamps
63 17.4.1 complete, including painting of fittings and brackets, cutting and 66.00 Each 3,723.20 245731.00
making good the walls and floors wherever required : One urinal basin
with 5 litre white P.V.C. automatic flushing cistern
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass
pillar taps, 32 mm C.P. brass waste of standard pattern, including
painting of fittings and brackets, cutting and making good the walls
64 17.7.1 wherever require : White Vitreous China Wash basin size 630x450 81.00 Each 2,764.40 223916.00
mm with a pair of 15 mm C.P. brass pillar taps
Providing and fixing white vitreous china pedestal for wash basin
65 17.8 completely recessed at the back for the reception of pipes and fittings. 110.00 Each 1,500.00 165000.00
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as
per IS : 13983 with C.I. brackets and stainless steel plug 40
66 17.10.1.3 mm,including painting of fittings and brackets, cutting and making 41.00 Each 5,499.10 225463.00
good the walls wherever required : 510x1040 mm bowl depth 200 mm
Providing and fixing P.V.C. waste pipe for sink or wash basin
67 17.28.1.1 including P.V.C. waste fittings complete. Semi rigid pipe 32 mm dia 94.00 metre 91.00 8554.00
Providing and fixing 600x450 mm beveled edge mirror of superior

glass (of approved quality) complete with 6 mm thick hard board
68 17.31 ground fixed to wooden cleats with C.P. brass screws and washers 73.00 each 1068.50 78001.00
complete.
Providing and fixing 600x120x5 mm glass shelf with edges round off,
supported on anodised aluminium angle frame with C.P. brass brackets
69 17.33 and guard rail complete fixed with 40 mm long screws, rawl plugs etc., 65.00 each 713.30 46365.00
complete.
Providing and fixing PTMT liquid soap container 109 mm wide,125

mm high and 112 mm distance from wall of standard shape with
70 17.71 bracket of the same materials with snap fittings of approved quality 73.00 Each 146.30 10680.00
and colour, weighing not less than 105 gms.
Providing and fixing PTMT towel rail complete with brackets fixed to
wooden cleats with CP brass screws with concealed fittings
71 17.73.1 arrangement of approved quality and colour. 450 mm long towel rail 79.00 Each 397.30 31387.00
with total length of 495 mm,78 mm wide and effective height of 88
mm, weighing not less than 170 gms
Providing and fixing on wall face unplastidsed-PVC(working pressure

4 kgf per sqm) rain water pipes conforming to IS :4985 including
72 12.78.2 jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for 1798.60 Meters 257.50 463139.50
thermal expansion. 110 mm diameter
Providing and fixing on wall face unplastidsed-PVC(working pressure

4 kgf per sqm) rain water pipes conforming to IS :4985 including
73 12.78.1 jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for 270.00 metre 162.70 43929.00
thermal expansion. 75 mm diameter
Page 7 of 65
S.O.R
CODE NO.
1 2 3 4 5 6 7
leaving 10 mm gap for thermal expansion. Single pushfit coupler 110
mm

leaving 10 mm gap for thermal expansion. Single pushfit coupler 75
mm

leaving 10 mm gap for thermal expansion. Single tee with door
110x110x110mm

leaving 10 mm gap for thermal expansion. Single tee with door
75x75x75 mm

leaving 10 mm gap for thermal expansion. Single tee without door
110x110x110 mm

leaving 10 mm gap for thermal expansion. Single tee without door
75x75x75mm

leaving 10 mm gap for thermal expansion. Band 87.50 110 mm bend

leaving 10 mm gap for thermal expansion. Band 87.50 75 mm bend

fittings/accessories for unplasticised-PVC rain water pipes
82 12.79.6.2 conforming to (S:4985 including jointing with seal ring conforming to 183.00 Each 115.95 21218.85
IS: 5382 leaving 10 mm gap for thermal expansion. Shoe plain 110m
Shoe

leaving 10 mm gap for thermal expansion. Shoe plain 75 mm shoe
Providing and fixing unplasticised -PVC pipe clip of approved design

to unplasticised PVC rain water pipe by means of 50x50x50mm hard
wood plugs,screwed with M.S. screws of required length including
84 12.80.1 cutting brick work and fixing on cement mortar(1:4) 1 cement: 4corsa 45.00 Each 184.10 8285.00
sand and making good the wall etc complete 75 mm
Page 8 of 65
S.O.R
CODE NO.
1 2 3 4 5 6 7
Providing and fixing unplasticised -PVC pipe clip of approved design
to unplasticised PVC rain water pipe by means of 50x50x50mm hard
wood plugs, screwed with M.S. screws of required length including
85 12.80.2 cutting brick work and fixing on cement mortar(1:4) 1 cement: 4corsa 893.00 Each 182.72 163168.96
sand and making good the wall etc complete 110 mm
Constructing masonry Chamber 60x60x75 cm inside, in brick work in

cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve,with C.I.
surface box 100mm top diameter, 160 mm bottom diameter and 180
mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1
cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size )
, i/c necessary excavation, foundation concrete 1:5:10(1 cement : 5
fine sand : 10 graded stone aggregate 40 mm nominalsize) and inside
86 18.33.1 plastering with cement mortar 1:3 (1 cement : 3coarse sand) 12 mm 126.00 Each 7210.60 908536.00
thick, finished with a floating coat of neat cement complete as per
standard design : With common burnt clay F.P.S.(non modular) bricks
of class designation 100A
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,

having thermal stability for hot & cold water supply, including all
CPVC plain & brass threaded fittings, including fixing the pipe with
clamps at 1.00 m spacing. This includes jointing of pipes & fittings
87 18.8.1 with one step CPVC solvent cement and testing of joints complete as 500.00 metre 278.20 139100.00
per direction of Engineer in Charge. Concealed work, including cutting
chases and making good the walls etc. 15 mm nominal outer dia Pipes

per direction of Engineer in Charge. Concealed work, including cutting
chases and making good the walls etc. 25 mm nominal outer dia Pipes

having thermal stability for hot & cold water supply including all
CPVC plain & brass threaded fittings This includes jointing of pipes &
fittings with one step CPVC solvent cement ,trenching ,refilling &
89 18.9.5 testing of joints complete as per direction of Engineer in Charge. 490.00 metre 477.60 234024.00
External work 40 mm nominal outer dia Pipes
Providing and fixing C.P. brass stop cock (concealed) of standard

90 18.52.1 design and of approved make conforming to IS:8931. 15 mm nominal 204.00 Each 594.80 121339.00
bore
Providing and placing on terrace (at all floor levels) polyethylene
water storage tank, ISI : 12701 marked, with cover and suitable
91 18.48 locking arrangement and making necessary holes for inlet, outlet and 37000.00 per litre 9.70 358900.00
overflow pipes but without fittings and the base support for tank.
Providing and fixing C.P. brass bib cock of approved quality

92 18.49 conforming to IS:8931 : 38.00 Each 434.20 16500.00
Providing and fixing C.P. brass long nose bib cock of approved quality
93 18.50.1 conforming to IS standards and weighing not less than 810 gms. 15 107.00 Each 715.10 76516.00
mm nominal bore
Providing and fixing C.P. brass long body bib cock of approved
94 18.51.1 quality conforming to IS standards and weighing not less than 690 50.00 Each 708.40 35420.00
gms. 15 mm nominal bore
Page 9 of 65
S.O.R
CODE NO.
1 2 3 4 5 6 7
Providing and fixing PTMT grating of approved quality and colour.
95 18.58.1.2 Circular type 125 mm nominal dia with 25 mm waste hole 134.00 Each 45.20 6057.00
Providing and fixing PTMT swivelling shower, 15 mm nominal bore,

96 18.64 weighing not less than 40 gms 32.00 Each 106.10 3395.00
Providing and fixing gun metal gate valve with C.I. wheel of approved
97 18.17.1 quality (screwed end) : 25 mm nominal bore 28.00 Each 532.30 14904.00
Providing and laying in position cement concrete of specified grade
exluding the cost of centring and shuttering-all work upto plinth level. Cubic
98 4.1.2 1:1.5:3(1 Cement :1.5 coarse sand:3 graded stone aggregate 20 mm 18.72 4420.80 82757.38
Meters
nominal size)
foundations and plinth in : Cement mortar 1.:4 (1 cement: 4 coarse Cubic
99 6.1.12C 152.70 5116.30 781259.01
sand ) Meters
Providing and laying in position machine batched, machine mixed and

machine vibrated design mix cement concrete of specified grade for
reinforced cement concrete structural elements, excluding the cost of
centring, shuttering finishing and reinforcement, M-20 grde reinforcd Cubic
100 5.33A.1 28.15 4756.90 133916.25
cement concrete All work upto plinth level Meters
13.11.1 + Cement plaster in course sand 12 mm cement plaster of mix: 1:3 (1 Square
101 cement:3 coarse sand) Neat cement punning 963.85 204.80 197396.48
13.26 Meters
Providing and fixing soil, waste and vent pipes : 100 mm dia Sand cast
102 17.35.1.1 iron S&S pipe as per IS: 1729 227.00 metre 978.30 222074.10
Cement plaster in course sand 12 mm cement plaster of mix: 1:4(1 Square
103 13.11.2 cement :4 coarse sand) 5048.48 152.90 771912.59
Meters
Supplying of Brick Bats Cubic
104 0362 1.84 1032.00 1898.88
Meters
Boring/drilling bore well of required dia for casing/ strainer pipe, by
suitable method prescribed in IS: 2800 (part I), including collecting
samples from different strata, preparing and submitting strata
chart/bore log, including hire & running charges of all equipments,
105 24.1.1.1 tools, plants & machineries required for the job, all complete as per 940.00 metre 486.80 457592.00
direction of Engineer -in-charge, upto 90 metre depth below ground
level. All types of soil 300 mm dia
Supplying, assembling, lowering and fixing in vertical position in bore

well, unplasticized PVC medium well casing (CM) pipe of required
dia, conforming to IS: 12818, including required hire and labour
106 24.3.2 charges, fittings & accessories etc. all complete, for all depths,as per 720.00 metre 660.10 475272.00
direction of Engineer -in-charge. 150 mm nominal size dia

well unplasticized PVC medium well screen (RMS) pipes with ribs,
107 24.4.2 conforming to IS: 12818, including hire & labour charges, fittings & 90.00 metre 673.50 60615.00
accessories etc. all complete, for all depths, as per direction of
Engineer-in-charge. 150 mm nominal size dia
Gravel packing in tubewell construction in accordance with IS:

4097,including providing gravel fine/ medium/ coarse, in required Cubic
108 24.8 grading & sizes as per actual requirement, all complete as per direction 64.16 1343.20 86179.71
Meters
of Engineer-in-charge.
Page 10 of 65
S.O.R
CODE NO.
1 2 3 4 5 6 7
Development of tube well in accordance with IS : 2800 (part I) and IS:
11189, to establish maximum rate of usable water yield without sand
content (beyond permissible limit), with required capacity air
compressor, running the compressor for required time till well is fully
develo ped, measuring yield of well by "V" notch method or any other
approved method, measuring static level & draw down etc. by step
109 24.12 draw down method, collecting water samples & getting tested in 90.00 Hours 916.80 82512.00
approved laboratory, i/c disinfection of tubewell, all
complete,including hire & labour charges of air compressor, tools &
accessories etc., all as per requirement and direction of Engineer-in-
charge.
Providing and fixing suitable size threaded mild steel cap or spot
welded plate to the top of bore well housing/ casing pipe, removable as
110 24.13.2 per requirement, all complete for borewell of: 150 mm dia 9.00 Each 210.70 1896.30
Providing and fixing M.S. clamp of required dia to the top of casing/
housing pipe of tubewell as per IS: 2800 (part I), including necessary
111 24.14.2 bolts & nuts of required size complete. 150 mm clamp 9.00 Each 1531.40 13782.60
Providing and fixing Bail plug/ Bottom plug of required dia to the
112 24.15.2 bottom of pipe assembly of tubewell as per IS:2800 (part I). 150 mm 9.00 Each 281.80 2536.20
dia
Supplying, Fitting and Fixing 2 H.P. Crompton Submersible Pump of
113 ISI marka electric wire switch, starter etc. 9.00 Each 18500.00 166500.00
well, ERW (Electric Resistance Welded) FE 410 plain slotted (having
slot of size 1.6/3.2 mm) mild steel threaded and socketed / plain bevel
ended pipe (type A) of required dia, conforming to IS: 8110, of
reputed and approved make, having wall thickness not less than 5.40
mm, including painted with outside surface with two coats of
114 24.11.2 22.50 metre 1727.20 38862.00
anticorrosive bitumestic paint of approved brand and
manufacture,including hire & labour charges, fittings & accessories,
all complete,for all depths, as per direction of Engineer -in-charge. 150
mm nominal size dia
Providing and fixing pressed steel door confirming IS code 4351

manufactured from commerical mild steel sheet of 1.25 mm thickness
including hinges, jamb, lock jamb, bead and if required angle threshold
of mild steel angle of section 50 x 25 mm or base ties of 1.25mm
pressed mild steel welded or rigidly fixed together by mechnical
means, adjustable lugs with split end tail to each jamb including steel
115 10.15.1.1 butt hinges 2.5 mm thick with mortar guards, lock strike-plate and 57.30 metre 405.80 23252.34
shock absorbers as specified and applying a coat of approved steel
primer after pre-treatment of the surface as directed by Engineer-in-
charge: Profile B Fixing with adjustable lugs with split end tail to each
jamb
Providing and laying Ceramic glazed floor tiles 300x300 mm

(thickness sqm 799.40 to be specified by the manufacturer) of ist
quality conforming to IS : 15622 of approved make in colours such as
white , Ivory , Grey , Fume Red , Brown, laid on 20 mm thick Cement Square
116 11.37 motar 1:4 (1 cement: 4 coarse sand) including pointing the joints with 282.21 686.80 193821.83
Meters
white cement and matching pigment etc., complete.
Providing and laying vitrifed floor tiles in different sizes {thickness to

be specified by the manufactruer) with water absorption's less than
0.08 % and conforming to IS : 15622 of approved make in all colours
and shades, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 Square
117 11.41.2 coarse sand ) including grouting the joint with white cement and 2740.60 1638.80 4491295.28
Meters
matching pigments etc., complete. Size of Tile 60x60 cm
Page 11 of 65
S.O.R
CODE NO.
1 2 3 4 5 6 7
Providing and laying Vitrified tiles in different sizes (thickness to be
specified by the manufacturer), with water absorption less than 0.08%
and conforming to IS: 15622, of approved brand & manufacturer, in all
colours and shade, in skirting, riser of steps, laid with cement based
high polymer modified quick set tile adhesive (water based) Square
118 11.47.2 27.73 1333.30 36972.41
conforming to IS: 15477, in average 6 mm thickness, including Meters
grouting of joints (Payment for grouting of joints to be made
separately). Size of Tile 600 x 600 mm.
CEMENT PLASTER WITH A FLOATING COAT OF NEAT

CEMENT 12 mm cement plaster 1:3( 1 cement: 3 coarse sand) Square
119 13.17.1 208.55 203.60 42460.78
finished with a floating coat of neat cement Meters
Providing and fixing 18 mm thick gang saw cut, mirror polished,

premoulded and prepolished, machine cut for kitchen platforms, vanity
counters, window sills, facias and similar locations, of required
size,approved shade, colour and texture laid over 20 mm thick base
cement mortar 1:4 (1 cement : 4coarse sand), joints treated with white
cement, mixed with matching pigment, epoxy touch ups,including Square
120 8.2.1.2 10.00 2615.30 26153.00
rubbing, curing, moulding and polishing to edges to give high gloss Meters
finish etc. complete at all levels. Rajnagar plain white marble /Udaipur
green marble/ Zebra block marble Area of slab over 0.50 sqm
Providing average 150mm thick dry rammed khoa beaten to 112mm

(compacted with water) made of well burnt or jhama bricks including
ramming properly till compacted thickness is achieved, curing and
carriage of water with all leads, making proper slope and blinding the Square
121 11.76 100.77 388.30 39128.99
top with cement mortar (1: 10) all complete as per building Meters
specification and direction of E/l,

Providing and fixing bright finished brass peg stays 300 mm long of
123 10.29 minimum weight 330 gms.to side hung steel windows with necessary 26.00 Each 182.70 4750.20
welding and machine screws etc. complete.
Providing and fixing 18 mm thick gang saw cut, mirror polished,
premoulded and prepolished, machine cut for kitchen platforms, vanity
counters, window sills, facias and similar locations, of required
size,approved shade, colour and texture laid over 20 mm thick base
cement mortar 1:4 (1 cement : 4coarse sand), joints treated with white
cement, mixed with matching pigment, epoxy touch ups,including Square
124 8.2.1.1 3.13 2458.00 7693.54
rubbing, curing, moulding and polishing to edges to give high gloss Meters
finish etc. complete at all levels. Rajnagar plain white marble /Udaipur
green marble/ Zebra block marble Area of slab upto 0.50 sqm
20 mm cement plaster of mix ; 1:3 (1 cement: 3 coarse sand) Extra for

13.13.1 + providing and mixing water proofing material in proportion Square
125 recommended by the manufacturers: 20 mm cement plaster 1:3(1 422.53 240.40 101576.21
13.36.5 Meters
cement:3 sand)
Providing wood work in frames of doors, windows, clerestory

windows and other frames, wrought framed and fixed in position with
hold fast lugs or with dash fasteners of required dia & length ( hold Cubic
126 9.1.2 2.04 95670.70 195455.24
fast lugs or dash fastener shall be paid for separately). Sal wood Meters
Providing and applying plaster of paris putty of 2 mm thickness over

plastered surface to prepare the surface even and smooth complete. Square
127 13.40A 3013.15 127.90 385381.89
Meters
Page 12 of 65
S.O.R
CODE NO.
1 2 3 4 5 6 7
Painting with ready mixed paint of approved brand and manufacture in
all shades to give an even shade: New wood work (two or more coats)
13.82.2 + Applying priming coat: with ready mixed aluminum primer of Square
128 391.03 124.70 48761.44
13.81.2 approved brand and manufacture on resinous wood and plywood. Meters

all shades to give an even shade: New wood work (two or more coats) Square
129 13.82.2 300.89 83.50 25124.32
Meters
Providing and fixing aluminium handles, ISI marked, anodised (anodic

coating not less than grade AC 10 as per IS : 1868) transparent or dyed
130 9.100.2 to required colour or shade, with necessary screws etc. complete: 100 166.00 Each 50.30 8349.80
mm
Providing and fixing gun metal non- return valve of approved quality
131 18.19.3.1 (screwed end) : 40 mm nominal bore Horizontal 16.00 Each 815.00 13040.00
132 18.19.3.2 (screwed end) : 40 mm nominal bore Vertical 16.00 Each 1049.20 16787.20
Providing and fixing panelled or panelled and glazed shutters for
doors, windows and clerestory windows, including ISI marked
M.S.pressed butt hinges bright finished of required size with necessery
Square
133 9.5.3.2 screws, excluding panelling which will be paid for separately, all 49.48 2445.80 121018.18
Meters
complete as per direction of Engineerin-charge. Kiln seasoned selected
planks of sheesham wood. 30 mm thick
Providing and fixing ISI marked flush door shutters conforming to IS :

2202 (Part I) decorative type, core of block board construction with
frame of 1 st class hard wood and well matched teak 3 ply veneering
Square
134 9.20.1 with vertical grains or cross bands and face veneers on both faces of 188.94 2845.60 537647.66
Meters
shutters. 35 mm thick including stainless steel butt hinges with
necessary screws
Providing and fixing to existing door frames. 24 mm thick factory

made PVC door shutters made of styles and rails of a uPVC hollow
section of size 59x24 mm and wall thickness 2 mm (± 0.2 mm) with
inbuilt edging on both sides. The styles and rails mitred and joint at the
corners by means of M.S. galvanised/plastic brackets of size 75x220
mm having wall thickness 1.0 mm and stainless steel screws. The
styles of the shutter reinforced by inserting galvanised M.S. tube of
size 20x20 mm and 1 mm (± 0.1 mm) wall thickness. The lock rail
made up of ‘H’ section, a uPVC hollow section of size 100x24 mm
and 2 mm (± 0.2 mm) wall thickness, fixed to the shutter styles by
means of plastic/galvanised M.S. ‘U’ cleats. The shutter frame filled Square
135 9.118.1 with a uPVC multichambered single panel of size not less than 620 15.75 1629.00 25656.75
Meters
mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall
thickness. The panels filled vertically and tie bar at two places by
inserting horizontally 6 mm galvanised M.S. rod and fastened with
nuts and washers, complete as per manufacturer’s specification and
direction of Engineer-incharge. (For W.C. and bathroom door shutter).
Page 13 of 65
S.O.R
CODE NO.
1 2 3 4 5 6 7
Providing and fixing aluminium work for doors, windows, ventilators
and partitions with extruded built up standard tubular sections/
appropriate Z sections and other sections of approved make
conforming to IS: 733 and IS: 1285, fixing with dash fasteners of
required dia and size, including necessary filling up the gaps at
junctions, i.e. at top, bottom and sides with required EPDM rubber/
neoprene gasket etc. Aluminium sections shall be smooth, rust free,
straight, mitred and jointed mechanically wherever required including
cleat angle, Aluminium snap beading for glazing / aneling,C.P. brass /
stainless steel screws, all complete as per architectural drawings and
the directions of Engineer-in-charge. (Glazing, paneling and dash Kilogram
136 21.1.2.1 1085.55 447.20 485457.96
fasteners to be paid for separately) : For shutters of doors, windows & s
ventilators including providing and fixing hinges/ pivots and making
provision for fixing of fittings wherever required including the cost of
EPDM rubber / neoprene gasket
required (Fittings shall be paid for separately) Anodised aluminium
(anodised transparent or dyed to required shade according to IS: 1868,
Minimum anodic coating of grade AC 15)
Providing and fixing glazing in aluminium door, window, ventilator

shutters and partitions etc. with EPDM rubber / neoprene gasket etc.
complete as per the architectural drawings and the directions of
engineer-in-charge . (Cost of aluminium snap beading shall be paid in Square
137 21.3.3 27.91 1285.60 35881.10
basic item): With float glass panes of 8 mm thickness(weight not less Meters
than 20 kg/sqm).
Providing and fixing double action hydraulic floor spring of approved

brand and manufacture conforming to IS : 6315, having brand logo
embossed on the body / plate with double spring mechanism and door
weight upto 125 kg, for doors, including cost of cutting
floors,embedding in floors as required and making good the same
138 21.4.2 matching to the existing floor finishing and cover plates with brass 6.00 Each 2444.30 14665.80
pivot and single piece M.S. sheet outer box with slide plate etc.
complete asper the direction of Engineer-in-charge. With brass cover
plate minimum 1.25 mm thickness
Providing and fixing aluminium tubular handle bar 32 mm outer

dia,3.0 mm thick & 2100 mm long with SS screws etc .complete as per
139 21.12.2 direction of Engineer-in-Charge. Powder coated minimum thickness 12.00 Each 557.30 6687.60
50 micron aluminium tubular handle bar

Providing and fixing aluminium sliding door bolts, ISI marked,

anodised (anodic coating not less than grade AC 10 as per IS : 1868),
141 9.96.2 transparent or dyed to required colour or shade, with nuts and screws 132.00 Each 210.10 27733.20
Providing and fixing bright finished brass parliamentary hinges with

142 9.73.1 necessary screws etc. complete: 150x125x27x5mm 32.00 Each 381.60 12211.20
Providing and fixing M.S. grills of required pattern in frames of
windows etc. with M.S. flats, square or round bars etc. including Kilogram
143 9.48.2 priming coat with approved steel primer all complete. Fixed to 35834.26 161.60 5790816.42
s
openings/ wooden frames with rawl plugs screws etc
13.12.1 + 15 mm cement plaster on rough side of single or half brick wall of Square
144 mix. 1:3 (1 cement :3 coarse sand) Neat cement punning 64.79 230.50 14932.94
13.26 Meters
Reinforced cement conrete work in beams,suspended floors, roofs
having slope upto 15, landings,balconiec, shelves, chajjas, lintels,
bands, plain window sills, staircases and spiral stair cases upto floor
five level excludingthe cost of centring, shuttering, finishing and Cubic
145 5.3 2.95 5335.90 15746.24
reinforement with 1:2:4(1 cement:2 coarse sand:4 graded stone Meters
aggregate 20 mm nominal size).
Page 14 of 65
S.O.R
CODE NO.
1 2 3 4 5 6 7
Chequerred precast cement concrete tiles 22 mm thick with marbie
chips of size 6 mm in footpath & coutyard jointed with neat cement
slurry mixed with pigment to match the shade of tiles including
rubbing and cleaning tec. Complete on 20 mm thick bed of cement Square
146 11.20.2 22.27 953.10 21220.77
mortar 1:4(1 cement:4 coarse sand) Medium shade using 50% white Meters
cement 50% grey cement
Applying priming coat: with ready mixed aluminum primer of

approved brand and manufacture on resinous wood and plywood. Square
147 13.81.2 151.49 41.20 6241.39
Meters

all shades to give an even shade: New steel work (two or more coats) Square
148 13.82.1 1052.27 83.50 87864.71
Meters
Applying one coat of cement primer of approved brand and Square

149 13.78.1 manufacture on wall surface: Cement primer 485.40 38.60 18736.44
Meters
Finishing walls with water proofing cement paint of approved brand
and manufacture and of required shade to give an even shade New Square
150 13.79.1 485.40 81.20 39414.48
work (three or more coats) Meters
Finishing with Deluxe Multi surface paint system for interiors and
exteriors using Primer as per manufacturers specifications. Two or
more coats applied on walls @ 1.25 ltr/10 sqm over and including one Square
151 13.48.1 1474.05 117.30 172906.07
coat of special primer applied @ 0.75 ltr /10 sqm. Meters
Painting with synthetic enamel paint of approved brand and

manufacture to give an even shade: Two or more coats on new work Square
152 13.93.1 64.79 84.50 5474.76
Meters
Providing and fixing PTMT pillar cock of approved quality and colour
153 18.56.2 15 mm nominal bore, 125 mm long foam flow, weighing not less than 16.00 Each 194.20 3107.00
120 gms
154 18.19.1.1 (screwed end) : 25 mm nominal bore Horizontal 2.00 Each 506.60 1013.00
of form for. Walls (any thickness) including attached pilasters. Square
155 5.9.2 99.54 375.10 37337.45
Butteresses, plinth and string courses etc. Meters
13.17.2 12 mm cement plaster 1:4( 1 cement: 4coarse sand) finished with a Square
156 floating coat of near cement Details of cost for 10 sqm 256.04 192.20 49211.00
Meters
19.18.3 Supplying and fixing C.I. cover without frame for manholes : 560 mm
157 diameter C.I. cover (heavy duty) the weight of the cover to be not less 2.00 Each 6918.30 13836.60
than 108 kg
Cement concrete flooring 1:2:4(1 cement:2 coarse:sand:4 graded stone
agregate) finished with a floating coat of neat cement including cement
slurry, etc. but excluding the cost of nosing of steps etc. complete. 40 Square
158 11.3.1 1858.34 289.10 537246.09
mm thick with 20 mm nominal size stone aggregate Meters
Providing and laying damp-proof Course 40 mm thick with cement

concrete 1:2:4(1 cement:2:2 coarse sand :4 graded stone aggregate Square
159 4.10 40.13 210.45 8445.36
20mm nominal size) Meters
Brick work with bricks of class designation 100A in foundations and Cubic
160 6.1.14A plinth in : Cement mortar 1:6 (1 cement: 6 coarse sand ) 31.37 4819.90 151200.26
Meters
Brick work with bricks of class designation 100A in foundations and
plinth in : Cement mortar 1:6 (1 cement: 6 coarse sand ) Extra for Cubic
161 6.1.14A + 6.3A Brick work in superstructure above plinth level upto floor V cum 15.40 5662.10 87196.34
Meters
Providing and fixing 1 mm thick M.S. sheet door with frame of

40x40x6 mm angle iron and 3mm MS gusset plates at the junction and
corners.all necessary fittings completejncluding applying a priming Square
162 10.5.1 2.21 3653.00 8073.13
coat of approved steel primer. Using M.S. angle 40x40x6 mm for Meters
diagonal braces
6 mm cement plaster to ceiling of mix : 1:3(1 cement: 3 coarse sand) Square

163 13.24.1 27.69 131.30 3635.70
Meters
Page 15 of 65
S.O.R
CODE NO.
1 2 3 4 5 6 7
Distempering with dry distemper of approved brand and manufacture
(two or more coats ) and of required shade on new work , over and Square
164 13.75 including priming coat of whiting to give an even shade. 69.43 70.50 4894.82
Meters
Providing unskilled labor for cleaning near boundary wall and other
165 0L01 miscellanious work as per direction of E/I/ 47.00 Each 355.42 16704.74
Providing designation 100 A one brick on edge soling joints filled with
local sand including cost of watering, taxes, royalty all complete as per Square
166 11.73 3873.43 444.80 1722901.66
building specification and direction of E/l, Meters
Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone

aggregate 40 mm nominal size) in pavements, laid to required slope Cubic
167 16.42 and camber in panels as required including consolidation finishing and 871.52 4649.00 4051696.48
Meters
tamping complete.
Providing and laying 60 mm thick factory made cement concrete

interlocking paver block of M -30 grade made by block making
machine with strong vibratory compaction, of approved size, design &
shape, laid in required colour and pattern over and including 50 mm Square
168 11.77 thick compacted bed of coarse sand, filling the joints with fine sand 252.00 721.10 181717.20
Meters
etc. all complete as per the direction of Engineer-in-charge.
Providing and laying at or near ground level factory made kerb stone
of M-25 grade cement concrete in position to the required line, level
and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse
sand), including making joints with or without grooves (thickness of
joints except at sharp curve shall not to more than 5mm), including
making drainage opening wherever required complete etc. as per Cubic
169 16.69 20.00 7998.80 159976.00
direction of Engineer-in-charge (length of finished kerb edging shall Meters
be measured for payment). (Precast C.C. kerb stone shall be approved
by Engineer-in-charge).
Providing and laying in position specified grade of reinforced cement

concrete excluding the cost of entring,shuttering,finishing and
reinforcement-All work puto plinth level 1:1:5:3(1 cement: 1.5 coarse Cubic
170 5.1.2 4.50 4688.30 21097.35
sand:3 graded stone aggregate 20 mm nominal size) Meters
Supplying, filling, spreading & leveling stone boulders of size range 5

cm to 20 cm, in recharge pit, in the required thickness, for all leads & Cubic
171 24.5 lifts, all complete as per direction of Engineer- ncharge. 3.10 1188.90 3685.59
Meters
Supplying, filling, spreading & leveling gravels of size range 5 mm to

10 mm, in the recharge pit, over the existing layer of boulders, in Cubic
172 24.6 required thickness, for all leads & lifts, all complete as per direction of 3.50 1195.60 4184.60
Meters
Engineer-in-charge.
Supplying, filling, spreading & leveling coarse sand of size range 1.5
mm to 2 mm in recharge pit, in required thickness over gravel layer, Cubic
173 24.7 for all leads & lifts, all complete as per direction of Engineer -in- 3.90 1195.60 4662.84
Meters
charge.
174 7745 Supplying, fitting and fixing 150 mm dia pvc Blind Pipe. 420.00 metre 490.00 205800.00
Excavating trenches of required width for pipes cables, etc, including
excavation for sockets, and dressing of sides, ramming of bottoms,
depth upto 1.5 m including getting out the excavated soil , and then
returning the soil as required , in layers not exceeding 20 cm in depth
175 2.10.1.1 including consolidating each deposited layer by ramming, watering, 555.00 metre 239.80 133089.00
etc. and disposing of surplus excavated soil as directed , within a lead
of 50 m. All kinds of soil. Pipes, cables etc, not exceeding 80 mm dia.
Page 16 of 65
S.O.R
CODE NO.
1 2 3 4 5 6 7
Excavating trenches of required width for pipes cables, etc, including
excavation for sockets, and dressing of sides, ramming of bottoms,
depth upto 1.5 m including getting out the excavated soil , and then
returning the soil as required , in layers not exceeding 20 cm in depth
including consolidating each deposited layer by ramming, watering,
176 2.10.1.2 etc. and disposing of surplus excavated soil as directed , within a lead 498.00 metre 391.70 195067.00
of 50 m. Pipes, cables etc. exceeding 80 mm dia . But not exceeding
300mm dia.
Providing and fixing G.I. pipes complete with G.I. fittings and clamps,
177 18.10.1 i/c cutting and making good the walls etc. Internal work - Exposed on 450.00 metre 227.70 102465.00
wall 15 mm dia nominal bore
Providing and fixing G.I. pipes complete with G.I. fittings including
182 18.12.7 trenching and refilling etc. External work 65 mm dia nominal bore 45.00 metre 667.70 30046.50
Cutting holes up to 30x30 cm in walls including making good the

183 18.76.1 same: With common burnt clay F.P.S. (non modular) bricks 210.00 Each 198.50 41685.00
Painting G.I. pipes and fittings with synthetic enamel white paint with
187 18.38.1 two coats over a ready mixed priming coat, both of approved quality 450.00 metre 11.90 5355.00
for new work : 15 mm diameter pipe
Painting G.I. pipes and fittings with two coats of anti-corrosive
192 18.40.7 bitumastic paint of approved quality : 65 mm diameter pipe 45.00 metre 19.40 873.00
Providing and fixing white vitreous china wash basin including
193 17.25.2 making all connections but excluding the cost of fittings : Flat back 45.00 Each 915.40 41193.00
wash basin of size 550x400 mm
Page 17 of 65
S.O.R
CODE NO.
1 2 3 4 5 6 7
Providing and fixing white vitreous china pedestal type water closet
(European type W.C. pan) with seat and lid, 10 litre low level white
P.V.C. flushing cistern, including flush pipe, with manually controlled
device (handle lever), conforming to IS : 7231, with all fittings and
194 17.2.1 fixtures complete, including cutting and making good the walls and 10.00 Each 4230.00 42300.00
floors wherever required :W.C. pan with ISI marked white solid plastic
seat and lid
Providing and fixing stone slab with table rubbed, edges rounded
and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal
partitions by cutting a chase of appropriate width with chase cutter and
embedding the stone in the chase with epoxy grout or with cement
concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone finished Square
195 8.10.1 25.00 3061.20 76530.00
smooth.aggregate 6 mm nominal size) as per direction of Engineer-in- Meters
Charge and White Agaria Marble Stone
Providing and fixing soil, waste and vent pipes : 75 mm diameter :

196 17.35.2.1 Sand cast iron S&S pipe as per IS: 1729 250.00 metre 898.50 224625.00
Providing and fixing plain bend of required degree. 100 mm dia Sand
197 17.39.1.1 cast iron S&S as per IS - 1729 30.00 Each 457.20 13716.00
Providing and fixing plain bend of required degree. 75 mm dia Sand
198 17.39.2.1 cast iron S&S as per IS -1729 60.00 Each 311.60 18696.00
Providing and fixing single equal plain junction of required degree
with access door, insertion rubber washer 3 mm thick, bolts and nuts
199 17.43.1.1 complete. 100x100x100 mm Sand cast iron S&S as per IS - 1729 20.00 Each 671.20 13424.00
Providing and fixing single equal plain junction of required degree

with access door, insertion rubber washer 3 mm thick, bolts and nuts
200 17.43.2.1 complete. 75x75x75 mm Sand cast iron S&S as per IS - 1729 25.00 Each 573.80 14345.00
Painting sand cast iron/ centrifugally cast (spun) iron soil, waste vent
pipes and fittings with two coats of synthetic enamel paint of any
201 17.65.1 colour such as chocolate grey, or buff etc. over a coat of primer (of 200.00 metre 46.10 9220.00
approved quality) for new work : 100 mm diameter pipe
Painting sand cast iron/ centrifugally cast (spun) iron soil, waste vent
pipes and fittings with two coats of synthetic enamel paint of any
202 17.65.2 colour such as chocolate grey, or buff etc. over a coat of primer (of 250.00 metre 35.30 8825.00
approved quality) for new work : 75 mm diameter pipe
Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry
brick honey comb shaft with bricks and S.W. drain pipe 100 mm
203 19.32.1 diameter, 1.8 m long complete as per standard design. With common 8.00 Each 33603.40 268827.20
burnt clay F.P.S. (non modular) bricks of class designation 7.5
Constructing soak pit 1.20x1.20x1.20 m filled with brickbats including

204 19.33 S.W. drain pipe 100 mm diameter and 1.20 m long complete as per 3.00 Each 4117.30 12351.90
standard design.
Constructing brick masonry road gully chamber 50x45x60 cm with
bricks in cement mortar 1:4 (1 cement : 4 coarse sand) including
205 19.27.1 500x450 mm pre-cast R.C.C. horizontal grating with frame complete 32.00 each 3743.30 119785.60
as per standard design : With common burnt clay F.P.S. (non
modular) bricks of class designation 7.5

leaving 10 mm gap for thermal expansion. Coupler 75mm
Page 18 of 65
S.O.R
CODE NO.
1 2 3 4 5 6 7
per direction of Engineer in Charge. Internal work - Exposed on wall
15 mm nominal outer dia Pipes
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement :

4 coarse sand ) with R.C.C. top slab with 1:2:4 mix (1 cement : 2
coarse sand : 4 graded stone aggregate 20 mm nominal size),
foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded
stone aggregate 40 mm nominal size), inside plastering 12 mm thick
with cement mortar 1:3 (1 cement : 3 coarse sand) finished with
floating coat of neat cement and making channels in cement concrete
1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm
nominal size) finished with a floating coat of neat cement complete as
208 19.7.1.1 10.00 each 7914.70 79147.00
per standard design : Inside size 90x80 cm and 45 cm deep including
C.I. cover with frame (light duty) 455x610 mm internal dimensions,
total weight of cover and frame to be not less than 38 kg (weight of
cover 23 kg and weight of frame 15 kg) : With common burnt clay
F.P.S. (non modular) bricks of class designation 7.5

209 19.7.2.1 7.00 each 18015.20 126106.00
C.I. cover with frame (medium duty) 500 mm internal diameter, total
weight of cover and frame to be not less than 116 kg (weight of cover
58 kg and weight of frame 58 kg) : With common burnt clay F.P.S.
(non modular) bricks of class designation 7.5

210 19.7.3.1 7.00 each 23949.20 167644.00
C.I. cover with frame (heavy duty) 560 mm internal diameter, total
weight of cover and frame to be not less than 208 kg (weight of cover
108 kg and weight of frame 100 kg) : With common burnt clay F.P.S.
(non modular) bricks of class designation 7.5
Page 19 of 65
S.O.R
CODE NO.
1 2 3 4 5 6 7
Constructing brick masonry chamber for underground C.I. inspection
chamber and bends with bricks in cement mortar 1:4 (1 cement : 4
coarse sand) C.I. cover with frame (light duty) 455x610 mm internal
dimensions, total weight of cover with frame to be not less than 38 kg
(weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab
with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20
mm nominal size), foundation concrete 1:5:10 (1 cement : 5 fine
sand : 10 graded stone aggregate 40 mm nominal size), inside
211 19.30.1.1 plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse 32.00 each 4266.80 136538.00
sand), finished smooth with a floating coat of neat cement on walls and
bed concrete etc. complete as per standard design : Inside dimensions
455x610 mm and 45 cm deep for single pipe line : With common burnt
clay F.P.S. (non modular) bricks of class designation 7.5

mm nominal size), foundation concrete 1:5:10 (1 cement : 5 fine sand :
10 graded stone aggregate 40 mm nominal size), inside plastering 12
mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished
212 19.30.2.1 20.00 each 5107.40 102148.00
smooth with a floating coat of neat cement on walls and bed concrete
etc. complete as per standard design : Inside dimensions 500x700 mm
and 45 cm deep for pipe line with one or two inlets : With common

mm nominal size), foundation concrete 1:5:10 (1 cement : 5 fine sand :
10 graded stone aggregate 40 mm nominal size), inside plastering 12
mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished
213 19.30.3.1 8.00 each 5942.00 47536.00
smooth with a floating coat of neat cement on walls and bed concrete
etc. complete as per standard design : Inside dimensions 600x 850 mm
and 45 cm deep for pipe line with three or more inlets : With common
Providing and fixing brass bib cock of approved quality : 15 mm

214 18.15.1 nominal bore 73.00 each 303.80 22177.00
Providing and fixing brass stop cock of approved quality : 15 mm
215 18.16.1 nominal bore 87.00 each 303.80 26431.00
Providing and fixing C.P. brass angle valve for basin mixer and geyser
216 18.53.1 points of approved quality conforming to IS:8931 15 mm nominal bore 87.00 each 500.40 43535.00
Providing and fixing P.V.C. waste pipe for sink or wash basin
217 17.28.2.1 including P.V.C. waste fittings complete. Flexible pipe 32 mm dia 45.00 each 104.40 4698.00
Page 20 of 65
S.O.R
CODE NO.
1 2 3 4 5 6 7
Providing and fixing M.S. holder-bat clamps of approved design to
Sand Cast iron/cast iron (spun) pipe embedded in and including
cement concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2
218 17.37.1 coarse sand : 4 graded stone aggregate 20 mm nominal size),including 75.00 each 178.50 13388.00
cost of cutting holes and making good the walls etc. : For 100 mm dia
pipe
Providing and fixing M.S. holder-bat clamps of approved design to

Sand Cast iron/cast iron (spun) pipe embedded in and including
cement concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2
219 17.37.2 coarse sand : 4 graded stone aggregate 20 mm nominal size),including 21.00 each 174.50 3665.00
cost of cutting holes and making good the walls etc. : For 75 mm dia
pipe
Providing and fixing square-mouth S.W. gully trap class SP-1

complete with C.I. grating brick masonry chamber with water tight
C.I. cover with frame of 300 x300 mm size (inside) the weight of
cover to be not less than 4.50 kg and frame to be not less than 2.70 kg
220 19.4.3.1 as per standard design : 180x150 mm size P type With common burnt 28.00 each 1994.10 55835.00
clay F.P.S. (non modular) bricks of class designation 7.5
Supplying fitting and fixing geyser of capacity 10 litre Havells, Jagual,

221 NS Philips and equivalent. 15.00 each 9750.00 146250.00
supplying fitting and fixing of 2HP water pump of required brand and
222 NS magnifature complete in all respected to boring running condition. 4.00 each 18500.00 74000.00
Marble stone flooring with 18 mm thick marble stone (sample of

marble shall be approved by Engineer-in-charge) over 20 mm
(average) thick base of cement mortar 1:4 (1 cement: 4 coarse sand) Square
223 11.23.1 170.17 2934.30 499329.83
laid and jointed with grey cement slurry including rubbing and Meters
polishing complete with: Makrana white second quality.
Providing and laying flamed finish Granite stone flooring in required

design and patterns, in linear as well as curvilinear portions of the
building all complete as per the architectural drawings with 18 mm
thick stone slab over 20mm(avearage) thick base of cement mortar
1:4(1 cement : 4 coarse sand) laid and jointed with cement slurry and
pointing with white cement slurry admixed with pigment of matching
shade including rubbing , curing and polishing etc. all complete as Square
224 8.12 18.60 2147.70 39947.22
specified and as directed by the Engineer-in-Charge : Flamed finish Meters
granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or
equivalent.
225 10.21 Providing and fixing M.S. rivets of sizes in position. 240.00 metre 157.20 37728.00
all shades to give an even shade: New steel work (two or more coats)
13.82.1 + Applying priming coat: With ready mixed zinc chromate yellow Square
226 348.92 118.10 41207.45
13.81.3 primer of approved brand and manufacture on steel galvanized Meters
iron/steel works

all shades New wood work (two or more coats) Applying priming
13.82.2 + coat: With ready mixed pink or grey primer of approved brand and Square
227 400.00 123.20 49280.00
13.81.1 manufacture on wood work (hard and softwood) Meters
Providing and fixing aluminium pull bolt lock, ISI marked, anodised
(anodic coating not less than grade AC 10 as per IS : 1868),
228 9.98 transparent or dyed to required colour and shade, with necessary 100.00 Each 78.40 7840.00
screws bolts, nut and washers etc. complete.
Page 21 of 65
S.O.R
CODE NO.
1 2 3 4 5 6 7
Providing and laying water proofing treatment to vertical and
horizontal surfaces of depressed portions of W.C. kitchen and the like
consisting of: (i) 1st course of applying cement slurry @ 4.4 kg/sqm
mixed with water proofing compound conforming tc IS 2645 in
recommended proportions. (ii) 2nd course of 20 mm cement plaster
1:3 (1 cement:3 coarse sand)mixed with water proofing compound in
recommended proportion, (iii) 3rd course of applying blown Square
229 22.3 190.84 480.60 91717.70
or/residual bitumen aplied hot at 1.7 kg. per sqm of area, (iv) 4th Meters
course of 400 micron thick PVC sheet.(Overlaps at joints of PVC shet
should be 100 mm wide and pasted to each other with bitumen @ 1.7
kg/sqni).
Carrage Cost of Marerials

(i) Local Sand Cubic
230 5227.09 310.43 1622644.00
Meters
(ii) Coarse Sand Cubic
231 4535.51 2206.17 10006095.07
Meters
(iii) Stone Chips Cubic
232 5748.25 2275.07 13077659.75
Meters
(iv) Bricks 1000
233 2168.62 940.97 2040605.42
Number
(v) Earch Cubic
234 21138.78 272.06 5751015.40
Meters
Extra cost of Materials
235 (i) Cement 74665.89 Bags 5.50 410662.00
(ii) Bricks 1000
236 2166.90 362.63 785782.95
Number
Supply of Furniture & Furnishing works For ITI Building
237 DWS/34756 OfficeTable with Side Unit- Table Top Size-] 1800Lx 9000 x
760Hlmm with 50 MMtable top thk & Side runner size- (1200Lx
400D x 760HIwith 35 MMthk. Straight line table with twowire
manager,Mobile pedestal with 3 drawer/center lock,interchangeble
side runner with 3 drawer with lock.one open shelf,one closed shutter
with lock,key board trey & CPUtrolley. Phenol bond using in
PreLaminated Particle Board & Edge band thickness will be start from
2mm for Top & lmrn for rest parts. Our PLPBcertified from lSI grade
& Termite, Borer & Fungus resistance laminated outside in selected
1.00 Each 97400.00 97400.00
color & inside (NonVisiblePart] will be balancing white. 100%
European design & texture & 100% Product Consistency, fade
resistance lamination best International Technology.Color-Wenge. The
Product should be BIFMA,Green Guard, AGSICertified, ISO 14001,
ISO50001:2011 Certified
238 RICH/37815/ High Back Chair with revolving.Size(Seat-51Ox480,Back-660x51O,

HB Height-Min.470mm Max.540mml Chrome plated base with gas height
adjustment and central tilting with single locking machenaism.
Armrest with padding. Leatherette uphlostery has the look and feel of
top grain leather. Cushion wtih lumber support for all day comfort.
Chrome plated loop armrest with padded upholstery for extra comfort.
chair rotates a full 360 degree in either direction for ease of
motion.Standard on every executive & controls rate and ease with
which chair reclines to different weight and strengths of users. Quick 1.00 Each 23400.00 23400.00
and easy adjustment regulated height of chair relative to floor. Lookout
tilt function when chair is in upright position. 5% post consumed
recycled content & 30% total recycled content. Color-Black.The
Product should be BIFMA,Green Guard, AGSICertified, ISO 14001,
ISO 50001:2011 Certified.
Page 22 of 65
S.O.R
CODE NO.
1 2 3 4 5 6 7
239 RICH/37816/A Multipurpose Fixed Chair - Size(Seat-510x500, Back-~10x510,
Height. Min.500mmlcantiliver chair & armrest with P.U.pading &
chrome plated base.Chrome plated loop armrest with padded
upholstery for extra comfort. Standard on every executive & controls
rate and ease with which chair reclines to different weight and
strengths ofusers. Quick and easy adjustment regulated height of chair
relative to floor. Look01.:: tilt function when chair is in upright 3.00 Each 17500.00 52500.00
position. 5% post consumed recycled content & 30% total recycled
content. Color-Black. The Product should be BIFMA,Greer Guard,
AG51Certified, ISO 14001, ISO50001:2011 Certified
240 BERRY/ 3 Seater Sofa- Size(L-1880x870x870)mm& 2 Seater Sofa-

55001/A Size(L1420x870x870)mm. Frame used is treated American pine
woodwith termite free & borer free. Soft & comfortable cushion w::h
high density and resilient foam. Frame used is Treated american pine
wood & the wood used in sofa has been 8% moisture, this prevents the
woodfrom wrapping and hending. all wood used is termite free and
borer free. Foam of sofa comfortable cushion with high density and
resilent foam. all apholstry materials used in specially designed. all 1.00 Each 56800.00 56800.00
plywoodused in MR Garde and are made by Durian,
ColorBlack/Brown.The Product should be BIFMA,Green Guard,
AGSI Certified, ISO 14001, ISO 50001:2011 Certified.
241 HOPPER/CT WoodenCenter Table - (LI1130mm X (W)630mmX (H)41Omm.The

centre table is made keeping your comfort In mind. The sheen on the
glass table top will ensure you are the envy ofmany a neighbour. Inlaid
onto a solid wood frame that slopes inward, the table is 3. gorgeous
piece of furniture to highlight your livingroom. The turned wooden
legs are sleek and sturdy providing the table with its support. The
wood work below the glass provides the glass with a focalpoint .... and 1.00 Each 23400.00 23400.00
some support. Add volumes of style to your livingroomwith the
Hopper centre table. The Product should be BIFMA,Green Guard,
AGSICertified, ISO 14001, ISO50001:2011Certified
242 HOPPER/ST WoodenSide Table - (L)1130mm (W)630mmX(H)41Omm.The Side

table is made keeping your comfort in mind. The sheen on the glass
table top will ensure you are the envy of many a neighbour. Inlaid onto
a solid wood frame that slopes inward, the table is a gorgeous piece of
furniture to highlight your living room. The turned wooden legs are
sleek and sturdy providing the table with its support. The woodwork
2.00 Each 18600.00 37200.00
below the glass provides the glass with a focaipoint and some support.
The Product should be BIFMA,Green Guard, AGSI Certified, ISO
14001, ISO50001:2011 Certified. r I,,-
Principal & Vice Principal Room
Page 23 of 65
S.O.R
CODE NO.
1 2 3 4 5 6 7
243 DWS/34752 Table with side unit return- Table Size(1500x750x750)mm& Side
runner Size(900x400x750)mm.Table made of25mm thk pre lam
particle board with edge banding. Table top supported with side panel
& fron panel. Kyeboard tray & cpu trolly. Table top with wire
manager & interchangable side runner with fixedpedestai of3 drawers.
Phenol bond using in Pre-Laminated Particle Board & Edgeband
thickness willbe start from 2mm forTop& Imm for rest parts. Our
PLPBcertified from lSI grade & Termite, Borer & Fungus resistance
laminated outside in selected color & inside (NonVisiblePart) will be 2.00 Each 55800.00 111600.00
balancing white. 100% European design & texture & 100%Product
Consistency, fade resistance lamination best International
Technology.TheProduct should be BIFMA,Green Guard, AGSI
Certified, ISO 14001, ISO50001:2011 Certified. Color-Wenge
244 MMPL/ HighBack Chiar Size (BackHeight-670xBackWidth-470)mm& (Seat

70001/HB/B Depth-485xSeat Width-47S)mmwith Min-MaxHeight (460-540)mm.
Nylonbase chair with push back mechanism & Fix handle. Nylon base
chair with push back mechanism. Back & seat covercushion chair
uphlostered in fabric & adjustable armrest locks any position. Syncro
mechenism with locking system and fivestar chrome base with nylon
casters. Seat & Back made'up of 14mm thick boilingwater proof
plywoodos IS1303.Chair rotates a full 360 degreein either direction for
ease of motion. Standard on everyexecutivewith task chair & controls
rate and ease with which chair reclines to different weight and 2.00 Each 11400.00 22800.00
strengths of users, Quick and easy adjustment regulated height of chair
relative to floor. Back reclines at A2-to-l ratio to the seat. 5% post
consumed recycled content & 30% total recycled content. Color-
Black.TheProduct should be BIFMA,Green Guard, AGSICertified,
ISO 1400I, ISO50001:2011 Certified
245 MMPL/ Visitor Chair- Cantiliver Chair Size(Back-H-470xW-460,Seat-

70011/CN/A D460x470)mm & Min. Height-430mm. Multipurpose fixedcantiliver
chair & armrest with pading & metal base. A 14mmthick, BWRgrade
plywood(IS:303)is used to make the seat and back. Deep cushioned
back and seat confirm to body contours for proper aligment, posture
and all day comfort. 5% post consumed recycled content & 30% totai
4.00 Each 9000.00 36000.00
recycled content. The Product should be BIFMA,Green Guard, AGSI
Certified, ISO 1400I, ISO50001:2011 Certified, Color-Black
246 BID/32626/A/3 3 Seater Sofa -3 Seater Sofa Size(1920x750x740)mm,Frame used is

treated American pine woo<iwith termite free & borer free. Soft &
comfortable cushion with high density Andresilient foam. Frame used
I is Treated american pine wood & the woodused in sofa has been 8%
moisture, this prevents the woodfrom wrapping and bending.
allwoodused is termite free and borer free. Foam of sofa comfortable
cushion with high density and resilent foam. all apholstry materials 2.00 Each 39800.00 79600.00
used in specia:;y designed. all plywoodused in MR Garde.The Product
should be BIFMA,Green Guard, AGSICertified,ISO 14001,
ISO50001:2011 Certified. Color-Black/Brown
Page 24 of 65
S.O.R
CODE NO.
1 2 3 4 5 6 7
247 BID/32626/A/2 2 Seater Sofa Size(1370x750x740)mm.Frame used is treated
Ar..ericanpine wood with termite free,& borer free. Soft& comfortable
cushion with high density and resilient foam. Frame used is Treated
american pine wood & the woodused in sofa has been 8% moisture,
this prevents the wood fromwrapping and bending. all woodused is
termite free and borer free. Foam of sofa comfortablecushion with high
density and resilent foam. all apholstry materials used in specially 1.00 Each 30000.00 30000.00
designed. all plywoodused in MRGarde. The Product should be
BIFMA,Green Guard, AGSICertified,ISO 14001, ISO 50001:20II
Certified. Color-Black/Brown
First AD Room, Exam Section & Placement Counaelllng

248 DWS/34753 OfficeTable Size(1200x600x760)mm.Table made of 30mm thk pre
lam particle board with edge banding & wire manager. Table top
supported with side panel & front panel & KeyaboardTray. Fixed
Pedestal of three drawer Size (400x450x725)mm. Phenol bond using
in Pre-Laminated Particle Board & Edge band thickness will be start
from 2mm for Top & Imm for rest parts. Our PLPBcertified from lSI
grade & Termite, Borer & Fungus resistance laminated outside in
selected color & inside (NonVisiblePart) will be balancing white. 3.00 Each 32400.00 97200.00
100% European design & texture & 100% Product Consistency, fade
resistance lamination best International Technology.The Product
should be BIFMA,Green Guard, AGSICertified, ISO 14001, ISO 5000
I:20II Certified. Color-Maple& Dark Gray
249 MMPL/ Medium Back Chair Size (Back Height-530xBackWidth-460)mm &

7000l/MB/B (Seat Depth-450xSeat Width-460)mmwith Min-MaxHeight
(420520)mm. Nylonbase chair with push back n.echanism & Fix
handle. Nylonbase chair with push back mecha.Jsm. Back & seat cover
cushion chair uphlostered in fabric & adjustable armrest locks any
position. Syncro mechenism with locking system and fivestar chrome
base with nylon casters. Seat & Back made up of 14mm thick boiling
water proof plywoodos IS1303.Chair rotates a full 360 degree in either
direction for ease of motion. Standard on everyexecutive with task
chair & controls rate and ease with which chair reclines to different 3.00 Each 10000.00 30000.00
weight and strengths of users. Quick and easy adjustment regulated
height of chair relative to floor.Back reclines at A2-to-l ratio to the
seat. 5% post consumed recycled content & 30% total recycled
content. Thc Product should be BIFMA,Green Guard, AGS[ Certified,
ISO 1400I, ISO5000 I:2011 Certified. Color-Black
250 MMPL/ Visitor Chair- Cantiliver Chair Size (Back-H-470xW-460,Seat-D-

70011/CN/A 460x470)mm & Min. Height-430mm. Multipurpose fixed cantiliver
chair & armrest with pading & metal base. A 14mm thick, BWRgrade
and all day comfort. 5% post consumed recycled content & 30% tota
recycled content. The Product should be BIFMA,Green Guard, AGS[
Certified, ISO 14001, ISO 50001:2011 Certified. Color-Blackl 6.00 Each 9000.00 54000.00
251 GARNE STEELALMlRAH - STEELALMlRAHSTORAGE (L)900MMX

(D)450MMX (H)1980MM OFFICESTOREWELL 4 GARNER
WITH4 SHELVES GAUGE: BODY:22 GAUGE"DOORS:20
GAUGE.The Product should be BIFMA,Green Guard, AGS:Certified, 2.00 Each 21500.00 43000.00
iSO 14001, ISO50001:2011 Certified.
Page 25 of 65
S.O.R
CODE NO.
1 2 3 4 5 6 7
252 MEDICALBE Single MedicalBed
D 1.00 Each 38450.00 38450.00
Capacity-12
253 WORKSTATI Linear Workstation- Size (750x600xI200)mm. ·67mmthk Sliding Tile
ON Based Partition. Single Metal raceway COverat skirting level in
(750X600XI20 Partition. Pin up & white board in partition above the tabletop. Table
0 top made of 25mm thk Prelamin particle board with pvc edges. PVC
KeyboardTray. Metal CPUTrolley. Phenol bond using in
PreLaminated Particle Board & Edge band thickness willbe star; from
2mm forTop & Imm for rest parts. Our PLPBcertified from lSI grade
& Termite, Borer & Fungus resistance laminated outside in selected 11.00 Each 33850.00 372350.00
color & Inside (NonVisiblePart) willbe balancing white. 100%
European design & texture & 100% Prouuct Consistency, fade
resistance lamination best International Technology.TheProduct should
be BIFMA,Green Guard, AGSICertified, ISO 14001, ISO 50001:2011
Certified
254 MMPL/ Medium Back Chiar Size (Back Height~530xBackWidth-~60)mm&

70006/MB (Seat Depth-450xSeat Width-460)mm with Min-MaxHeight (420-
520)mm. Nylonbase chair with push back mechanism & Fix handle.A
14mm thick, BWRgrade plywood([S:303)is used to make the seat and
back. Deep cushioned back and seat confirm to body contours for
proper aligment, posture and all day comfort. 5% post consumed
recycled content & 30% total recycled content. The Product should be 11.00 Each 10000.00 110000.00
B[FMA,Green Guard, AGSICertified, [SO 14001, ISO50001:2011
Certified. Color-Black
Fitter, Welder& Diesel Mech

255 COMPTON Free Standing Table - (L)1050mm X(D)5IOmmX(H)750.Table made
of 25mm thk pre lam particle board with edge banding & wire
manager. Table top supported with side panel & front panel &
KeyaboardTray. Phenol bond using in Pre-Laminated Particle Board &
Edge band thickness willbe start from 2mm forTop& Imm for rest
parts. Our PLPBcertified from lSIgrade & Termite, Borer & Fungus
resistance laminated outside in selected color & inside
(NonVisiblePart) will be balancing white. 100% European design & 5.00 Each 13400.00 67000.00
texture & 100% Product Consistency, fade resistance lamination best
International Technology.Color-Black/Wenge.The Product should be
BrFMA,Green Guard, AGSICertified, ISO 14001, ISO50001:2011
Certified

70011/CN/A 460x470)mm & Min. Height-430mm. Multipurpose fixed cantiliver
plywoo d(IS:303) is used to make the seat and back. Deep cushioned
and all day comfort. 5% post consumed recycled content & 30% total 5.00 Each 9000.00 45000.00
Certified, ISO 14001, ISO 50001:201 I Certified. Color-Slack
Conference
Page 26 of 65
S.O.R
CODE NO.
1 2 3 4 5 6 7
257 DWS/CNF/ ConferenceTable - size-(7200xI200x765)mm with 25mm thk table top.
0720 The extendable meeting adds a sense ofcharacter to conference rooms.
The innovation modular design enables varius configration. An all
woodconference table with minimalist look and basic functionality,
ideal for meeting room & top comes with 25mm thik pre lam particle
board & side panel 18mmthick prelam particle board & 2mm pvc edge
banding with modesty given much needed ptimary and close
interaction. Phenol bond using in Pre-Laminated Particle Soard &
Edge band thickness will be start from 2mm forTop& Imm for rest
parts. Our PLPBcertified from lSIgrade & Termite, Sorer & Fungus
resistance laminated outside in selected color & inside (NonVisible 1.00 Each 98450.00 98450.00
Part) willbe balancing white. 100% European design & texture &
100% Product Consistency, fade resistance lamination best
International Technology.Color-Slack Oak. The Product should be
BIFMA,Green Guard, AGSICertified, ISO 14001, ISO 50001:2011
Certified.
258 MMPL/ Medium Back Chair Size (Back Height-530xBack Width-460)mm&

70001/MB/S (Seat Depth-450xSeat Width-460)mm with Min-MaxHeight (420-
520)mm. Nylonbase chair with push back mechanism & Fix handle.
Nylonbase chair with push back mechanism. Back & seat cover
position. Syncro mechenism with locking system and five star chrome
base with nylon casters. Seat & Sac;';made up of 14mmthick boiling
direction for ease of motion. Standard on every executive with
different weight and strengths of users. Quick and easy adjustment 26.00 Each 10000.00 260000.00
regulated height of chair relative to floor.Back reclines at A2-to-1 ratio
to the seat. 5% post consumed recycled content & 30% total recycled
content. The Product ehould be BTFMA, Green Guam, AGSI
Certified, ISO 14001, ISO 50001:2011 Certified. Color-Black
First Floor
Class Room 1 To 5
259 WEBSTER/ BENCH: TWOSE:.TER/ COLLEGE SIZES: 1200MMLX 400MMD
2/C X 760MM HTWITHALLMS FRAME MATER [ALINKNOCK
DOWN TYPE, WITH DESK ,SEAT, BACK IN 18MM
PRELAMPARTICLE BOARD WITH METAL 55.00 Each 13200.00 726000.00
UNDERSTRUCTURE. Color of WoodenPart and Powdercoating
color
260 DWS/34753 OfficeTable Size(1200x600x760)mm. Table made of30mm thk pre am

particle board with edge banding & wire manager. Table top supported
with side panel & front panel & KeyaboardTray. Fixed Pedestal of
three drawer Size (400x450x725)mm. Phenol bond using in Pre-
Laminated Particle Board & Edge band thickness will be start from
2mm for Top & Imm for rest parts. Our PLPBcertified from [S[ grade
color & inside (NonVisible Part) will be balancing white. 100% 5.00 Each 32400.00 162000.00
resistance lamination best International Technogy. TheProduct should
be BIFMA,Green Guard, AGS[Certified, [SO 14001, ISO 50001:2011
Certified. Color-Maple& Dark Gray
Page 27 of 65
S.O.R
CODE NO.
1 2 3 4 5 6 7
70011/CN/A 460x470) mm & Min. Height-430mm. Multipurpose fixed cantiliver
chair & armrest with pading & metal base. A 14= thick, BWRgrade
plywood (IS:303)is used to make the seat and back. Deep cushioned
recycled content.The Product should be B[FMA,Green Guard,
AGS[ Certified, IS(, 1400I, ISO 50001:2011 Certified. Color-Black
For Faculty Room

262 DWS/34753 OfficeTable Size(1200x600x760)mm. Table made of30mm thk pre
supported wi";, side panel & front panel & KeyaboardTray. Fixed
Pedestal of three drawer ~'-e (400x450x725)mm. Phenol bond using in
Pre-Laminated Particle Board & Edge band thickness will be start
from 2mm for Top & Imm for rest parts. Our PLPBcertified from
[S[ grade e.. Termite, Borer & Fungus resistance laminated outside in
selected color & inside (NonVisible Part) will be balancing white.
100% European design & texture & 100%Product Consistency, fade 5.00 Each 32400.00 162000.00
resistance lamination best Internatio.ial Technology.The Product
should be BIFMA,Green Guard, AGSICertified, ISO 14001, ISO
50001:2011 Certified. Color-Maple& Dark Gray
263 MMPL/ Medium Back Chair Size (Back Height-530xBackWidth-460)mm&

70001/MB/B (Seat Depth-450xSeat Width-460)mm with Min-MaxHeight (420-
520)mm. NylonLase chair with push back mechanism & Fix handle.
base with nylon casters. Seat & Back made up of 14mm thick boilin
direction for ease of motion. Standard on every executive with task
chair & controls rate and ease with which chair reclines to different
weight and strengths of users. Quick and easy adjustment regulated 5.00 Each 10000.00 50000.00
height of chair relative to floor. Back reclines at A2-to-l ratio to the
content.The Product should be BIFMA,Green Guard, AGS[ Certified,
ISO 1400I, ISO 50001:20II Certified.. Color-Black
For Instruct Room

264 DWS/34753 OfficeTable Size(1200x600x760Imm.Table made of 30mm thk pre
lam particle board with edge banding &wire manager. Table top
supported with side panel & front panel & Keyaboard Tray. Fixed
Pedestal of three drawer Size (400x450x725Imm. Phenol bond usingin
Pre-Laminated Particle Board & Edge band thickness will be start
from 2mm for Top & Imm for rest parts. Our PLPB certified from lSI
selected color & inside (NonVisible Part] will be balancing white. 1.00 Each 32400.00 32400.00
32400.00' 100% European design & texture & 100% Product
Consistency, fade resistance lamination best International
Technology.TheProduct should be BIFMA,Green Guard,
AGSICertified, ISO 14001, ISO 50001:2011 Certified. Color-Maple&
Dark Gray
Page 28 of 65
S.O.R
CODE NO.
1 2 3 4 5 6 7
265 MMPL/ Medium Back Chair Size (Back Height-530xBack Width-460l mm &
70001/MB/B (Seat Depth-450xSeat Width-460lmm with Min-MaxHeight (420-
5201mm.Nylonbase chair with push back mechanism & Fix handle.
base with nylon casters. Seat & Back made up of 14mmthick boiling
direction for ease of motion. Standard on every executive with task
weight and strengths of users. Quick and easy adjustment regulated 1.00 Each 10000.00 10000.00
height of chair relative to floor.Back reclines at A2-to-1 ratio to the
content. The Product should be BIFMA,Green Guard, AGSI Certified,
ISO 1400I, ISO 50001:2011 Certified. Color-Black
For l.T & ESM

266 WORKSTATI Linear Workstation- Size (750x600xI200Imm. '67mm thk Sliding Tile
ON Based Partition. Single Metal raceway cover at skirting level in
(750X600X120 Partition. Pin up & white board in partition above the tabletop. Table
KeyboardTray. Metal CPUTrolley. Phenol bond using in Pre-
2mm for Top& 1mm for rest parts. Our PLPBcertified from lSI grade
&Termite, Borer & Fungus resistance laminated outside in selected
color & inside (NonVisible Part] will be balancing white. 100% 10.00 Each 33850.00 338500.00
50001:2011 Certified.
267 MMPL/ Medium Back Chair Size (Back Height-530xBack Width-460lmm &
7000;jMB/B (Seat Depth-4;,OxSeat Width-460lmm with Min-MaxHeight (420-
5201mm.Nylonbase chair with push back mechanism & Fix handle.
position. Syncro mechenism with locking system and fivestar chrome
base with nylon casters. Seat & Back made up of 14mm thick boiling
di.ection for ease of motion. Standard on e..ery executive with task
weight and strengths of users. Quick and easy adjustment regulated
height of c:lair relative to floor.Back reclines at A2-to-l ratio to the 10.00 Each 10000.00 100000.00
seat. 5% POSl consumed recycled content & 30% total recycled
content. The Product should be BIFMA,Green Guard, AGSI Certified,
ISO 14001, ISO50001:2011 Certified.. Color-Black
Page 29 of 65
S.O.R
CODE NO.
1 2 3 4 5 6 7
70011/CN/A 460x470lmm & Min. Height-430mm. Multipurpose fixed cantiliver
chair & armrest with pading & metal base. A 14mm thick, BWR grade
plywood(IS:3031is used to make the seat and back. Deep cushioned
and all uay comfort. 5% post consumed recycled content & 30% total 10.00 Each 9000.00 90000.00
269 ANJIS/32002 Cantiliver Chair - Chair Size (W1595mmX (D1510mmX(HI875mm.

Multi-purpose fixed chair,Metal frame,PU Padding on armrest.
Cushion upholstery in leatherette with four leg metal legs with matt
finish. The Product should be BIFMA,Green Guard, AGSICertified, 20.00 Each 6700.00 134000.00
ISO 14001, ISO 50001:2011 Certified. Color-Black
For Electrician
270 DWS/34748 Free Standing Table - Table Size (Main Top -1450mm X D-600mm,
H-750mm. Side Table Top -950mm, W-450mm X -750mm. 25mm
thick prelam tabletop with PVCedge banding. Table top supported
with powder coated fixed M.S. legs & adjustable metal modesty panel.
PVC Keyboard tray & metal CPUTrolly.The Product should be 1.00 Each 37100.00 37100.00
BIFMA, Green Guard, AGSI Certified, ISO 14001, ISO 50001:2011
Certified.
271 MMPL/700ll/ Visitor Chair- Cantiliver Chair Size (Back-H-470xW-460, Seat-D-

CN/A 460x470)mm & Min. Height-430mm. Multipurpose fixed cantiliver
plywood (IS:303) is used to make the seat and back. Deep cushioned
Examination Hall
272 TILDEN Study Desk with Chair - POWDERCOATEDSINGLEUNITTABLE
SIZE:584MMLX 380MMDX 787MM H CHAIR SIZE:355 MM 100.00 Each 11520.00 1152000.00
LX381 MM D X 787MMH.
273 DWS/34753 OfficeTable Size(1200x600x760)mm. Table made of 30mm thk pre
lam particle board with edge banding & wire manager. Table
top ,supported with side panel & front panel & Keyaboard Tray. Fixed
Pedestal of three drawer Size (400x450x725)mm. Phenol bond using
from 2mm for Top & Imm for rest parts. Our PLPBcertified from lSI
selected color & inside (Non Visible Part) will be balancing 1.00 Each 32400.00 32400.00
white.100% European design & texture & 100% Product Consistency,
fade resistance lamination best International Technology. The Product
should be BIFMA ,Green Guara, AGSICertified, ISO 14001, ISO 5000
I :20 II Certified. Color-Maple & Dark Gray
274 MMPL/ Visitor Chair- Cantiliver Chair Size (Back-H-470xW-460, Seat-De

7001l/CN/A 460x470)mm & Min. Height-430mm. Multipurpose fixed cantiliver
plywood (IS:303) is used to make the seat and back. Deep cushioned
back and seat confirm to body contours for proper a1igment, posture
and all day comfort. 5% post consumed recycled content & 30% 1.00 Each 9000.00 9000.00
totalrecycled content. The Product should be BIFMA,Green Guard,
AGSI Certified, ISO 1400 I, ISO 5000 I :20 1I Certified. Color-Black
For Library Room
Page 30 of 65
S.O.R
CODE NO.
1 2 3 4 5 6 7
275 ANJIS/32002 Cantiliver Chair - Chair Size
(W1595mmX(D151OmmX(HI875mm. .--Multi-purpose fixed
chair,Metal frame,PUPadding on arm rest. Cushion upholstery in
leatherette with four leg metal legs with matt finish.The Product 10.00 Each 6700.00 67000.00
should be BIFMA,Green Guard, AGSICertified, ISO 1400I, ISO
50001 :2011 Certified.Color-Black
276 CLINE 4 DOORGLASSBOKKCAS • (L1900MMX (D1450MM X(HI2MTS

BOOKCASE4 DOORSWITHCAM BODY:22 GAUGE' DOORS:20
GAUGE.Made of mild steel with powder coated 15.00 Each 21450.00 321750.00
277 DWS/34753 OfficeTable Sizer1200x600x760Imm.Table made of 30mm thk prelam

particle board with edge banding & wire manager. Table top supported
with side panel & front panel & KeyaboardTray. Fixed Pedestal of
three drawer Size (400x450x725Imm.Phenol bond using in Pre-
Laroinated Particle Board & Edgeband thickness will be start from
2mm forTop & 1mm for rest parts. Our PLPB certified from lS grade
color& inside (Non Visible Part] will be balancing white.100% 1.00 Each 32400.00 32400.00
European design & texture & 100%Product Consistency, fade
should be BIFMA,Green Guard, AGSICertified,ISO 14001, ISO
50001:2011 Certified. Color-Maple& Dark Gra
278 MMPL/ Medium Back Chiar Size (BackHeight-530xBackWidth-460lmm&

70006/MB (Seat Depth-450xSeat Width-460lmmwith Min-MaxHeight (420-
520)mm. Nylonbase chair with push back mechanism & Fix handle. A
14mm thick, BWRgrade plywood(IS:303)is used to make the seat and
proper aligment, posture and all day comfort. 5% post consumed
recycled content & 30% total recycled content.The Product should be 1.00 Each 9500.00 9500.00
BIFMA,Green Guard, AGSICertified,ISO 14001, ISO50001:2011
For Studio-l (Drawing Hall)

279 TILDEN Sudty Desk with Chair -POWDER COATED SINGLE UNITTABLE
SIZE:584MMLX 380MMDX 787MM HCHAIR SIZE:355MMLX 25.00 Each 11520.00 288000.00
381MMD X787MMH.
280 DWS/34753 OfficeTable Sizer1200x600x760)mm.Table made of 30mm thk pre
supported with side panel & front panel & KeyaboardTray. Fixed
Pedestal of three drawer Size (400Y450x725)mm.Phenol bond usingin
Pre-Laminatea Particle Board & Edgeband thickness will be start from
2mm for Top & Imm for rest parts. Our PLPBcertified from lSI grade
color & inside (NonVisible Part) will be balancing white. 100% 1.00 Each 32400.00 32400.00
European design 01. texture & 100%Product Consistency, fade
should be BIFMA,Green Guard, AGSICertified,ISO 14001, ISO
Page 31 of 65
S.O.R
CODE NO.
1 2 3 4 5 6 7
281 MMPL/ Medium Back Chiar Size (Back Height-530xBackWidth-460)mm &
70006/MB (Seat Depth-450xSeat Width-460)mmwith Min-MaxHeight (420-
520)mm. Nylonbase chair with push back mechanism & Fix handle.A
14mm thick, BWRgrade plywood(IS:303)is used to make the seat and
back. Deep cushioned back and seat confirm to bodycontours foproper
aligment, posture and all day comfort. 5% post consumed recycled 1.00 Each 9500.00 9500.00
content & 30% total recycledcontent, The Product should be BlFMA,
Green Guard, AGSICertified,ISO 14001, ISO50001:2011 Certified.
Color-Black
For Exam Cntroller

282 DWS/34752 Table with side unit return- Table Size(1500x750x750)mmwith 35 mm
thk top & Side runner Size(750x400x750)mmwith 35 mm thk Table
made of 35 mm thk pre lam particle board with edge banding.Table
top supported with 35 mm side panel & fron panel. Kyeboard tray &
cpu trolly. Table top with wire manager & interchangable side runner
with fixed pedestal of 3 drawers. Phenol bond using in Pre-Laminated
Particle Board & Edge band thickness will be start from 2mm for
Top& lmrn for rest parts. Our PLPBcertified from lSI grade &
Termite,Borer & Fungus resistance laminated outside in selected
1.00 Each 55800.00 55800.00
color& inside (NonVisiblePart) will be balancing white. 100%
resistance lamination best International Technology,Co[or-Wenge.The
Product should be BIFMA,Green Guard, AGSICertified, ISO 1400I,
[SO5000 I :20II Certified
283 MMPL/ HighBack Chiar Size (Back Height-670xBackWidth-470)mm& (Seat

70001/HB/B Depth-485xSeat Width-475)mmwith Min-MaxHeight (460-540)mm.
Nylonbase chair with push back mechanism & Fix handle. Nylon base
chair with push back mechanism. Back & seat cover cushion chair
uphlostered in fabric & adjustable armrest locks any position. Syncro
mechenism with locking system and five star chrome base with nylon
casters. Seat & Back made up of 14mmthick boilingwater proof
plywoodos IS[303. Chair rotates a full 360 degree in either direction
for ease of motion. Standard on every executivewith task chair &
controls rate and ease with which chair reclines to different weight and
strengths of users. Quick and easy adjustment regulated height of chair 1.00 Each 11400.00 11400.00
relative to floor.Back reclines at A2-to-1 ratio to the seat. 5% post
consumed recycled content & 30% total recycled content. Color-
Black.The Product should be BIFMA,Green Guard, AGSI Certified,
ISO 1400I, ISO5000I:20II Certified
284 MMPL/ VisitorChair- Cantiliver Chair Size (Back-H-470xW-460,Seat-D-

70011/CN/A 460x470)mm& Min. Height-430mm. Multipurpose fixedcantiliver
chair & armrest with pading &. metal base. A 14mmthick, BWRgrade
back and seat confirm to body contours for proper aiigment, posture
recycled content. The Product should be BIFMA,Green Guard,
AGS[ Certified,ISO 14001, ISO 50001:2011 Certified. Color-Black
On-Line Exam Hall
Page 32 of 65
S.O.R
CODE NO.
1 2 3 4 5 6 7
285 WORKSTATI Linear Workstation- Size (900x600xI200)m.". '67mm thk SlidingTile
ON Based Partition. Single Metalraceway cover at skirting level in
KeyboardTray. Metal CPUTrolley.Phenol bond using in Pre-
Laminated Particle Board & Edge band thlcl-ness will be start from
2mm for Top& Imm for rest parts. Our PLPBcertified from [S[grade &
Termite, Borer & Fungus resistance laminated outside in selected
color& inside (Non Visible Part) will be balancing white. 100% 101.00 Each 39840.00 4023840.00
resistance lamination best International Technology,The Product
should be BIFMA,Green Guard, AGS[Certified, ISO 14001, [SO
5000I:2011 Certified
286 MMPL/ Medium Back Chiar Size (Back Height-530xBackWidth-460)mm &

70006/MB (Seat Depth-450xSeat Width-460)mmwith Min-MaxHeight (420-
520)mm. Nylonbase chair with push back mecnanisrn & Fix handle.A
14mmthick, BWRgrade plywood([S:303)is used to make the sea and
back. Deep cushioned back and seat confirm to bodycontours for
proper aligment, posture and all day comfort. 5% post consumed 101.00 Each 9500.00 959500.00
recycled content & 30% total recycle dcontent. The Product should be
BIFMA,Green Guard, AGS[Certified,[SO 1400I, ISO50001:20II
Certified.Color-Black
3rd Floor
Comp.Lab,Common Room & Studio-2 (Drawing Hall-2
287 WORKSTATI Linear Workstation- Size (750x600xI200)mm. '67mm thk Sliding Tile
ON Based Partition. Single Metal raceway cover at skirting level in
Keyboard Tray. Metal CPUTrolley. Phenol bond using in Pre-
2mm for Top & lrnm for rest parts. Our PLPBcertified from lSI grade
&Termite, Borer & Fungus resistance-laminated outside in selected
color & inside (Non Visible Part) will be balancing white. 100% 20.00 Each 33850.00 677000.00
resistance lamination best International Technology. The Product
should be BIFMA ,Green Guard, AGSICertified, ISO 14001, ISO
5000 I :20 II Certified.
288 MMPL/ Medium Back Chiar Size (Back Height-530xBack Width-460)mm &
70006/MB (Seat Depth -450xSeat Width-460)rnm with Min-Max Height (420-
520)mm. Nylon base chair with push back mechanism & Fix handle.A
14mm thick, BWRgrade pJywood(IS:303) is used to make the seat and
proper aligrnent, posture and all day comfort. 5% post consumed
20.00 Each 9500.00 190000.00
recycled content & 30% total recycled content The Product should be
BlFMA,Green Guard, AGSICertified, ISO 14001, ISO 50001:2011
Page 33 of 65
S.O.R
CODE NO.
1 2 3 4 5 6 7
289 DWS/34753 OfficeTable Size(1200x6oox760)mm. Table made of 30mm thk pre
lam particle board with edge banding &wire manager. Table top
supported with side panel & front panel & Keyaboard Tray. Fixed
Pedestal of three "rawer Size (400x450x-:'25)mm.Phenol bond using
from 2rnm for Top & 1rnm for rest parts. Our PLPBcertified from lSI
grade & Termite, Borer 8:; Fungus resistance laminated outside in
selected color & inside (Non VIsiblePart) will be balancing 3.00 Each 32400.00 97200.00
white.100% European design & texture & 100% Product Consistency,
fade resistance lamination best International Technology. The Product
290 MMPL/ Medium Back Chiar Size (Back Height-530xBack Width-460)rnm

70006/MB &(Seat Dep'h-45xSeat Width-460)mm with Min-Max Height (420-
520)rnm. Nylon base chair with push back mechanism &Fix handle. A
14rnm thick, BWRgrade plywood (IS:303)is used to make the and
back. Deep cushioned back and sea, confirm to body contours for
proper a1igment, posture and all day comfort. 5% post consumed 3.00 Each 9500.00 28500.00
recycled content &30% total recycled content.The Product should be
BIFMA,Green Guard, AGSICertified, ISO 14001, ISO 50001:2011
291 TILDEN Study Desk with Chair - POWDERCOATEDSINGLEUNITTABLE

SIZE: 584MMLX 380MMDX 787MM HCHAIR SIZE:355MM
LX381 MM DX 787MMH. 25.00 Each 11520.00 288000.00
Supply of Furniture (Boys Hostel)

292 Providing supply and installation of Atlanta dining table set of
approved brand and manufactured as dirrected by E/I 5.00 Each 80786.00 403930.00
293 Providing supply and installation of storwel Model Wardrobe H1 of
294 Providing supply and installation of storwel Model-2 with locker of

295 Providing supply and installation of UNO study table of approved

brand and manufactured as dirrected by E/I 100.00 Each 5999.00 599900.00
296 Providing supply and installation of Store Up Overhead Storage Unit

of approved brand and manufactured as dirrected by E/I 101.00 Each 13648.00 1378448.00
297 Providing supply and installation of Zurina King Bed with Mattress of
298 Providing supply and installation of Opal single bed with mattress of
299 Providing supply and installation of Poise Chair (Study Chair) of

300 Providing supply and installation of Chair Model Uwind with SS
Understructrue of approved brand and manufactured as dirrected by 70.00 Each 3806.00 266420.00
E/I
301 Providing supply and installation of Pisa Sofa Set (3+1+1) of
302 Providing supply and installation of Crystalline Coffee Table of

303 Providing supply and installation of Parto three seater sofa of

304 Providing supply and installation of 4 Door book Case of approved
brand and manufactured as dirrected by E/I 1.00 Each 29081.00 29081.00
Page 34 of 65
S.O.R
CODE NO.
1 2 3 4 5 6 7
305 Providing supply and installation of Steel MF system of size 2'
6"x36'x18" with three sheter of approved brand and manufactured as 1.00 Each 3832.00 3832.00
dirrected by E/I
FIRE FIGHTING WORKS ITI Building
I. PIPING & VALVES
306 7 Providing, laying, testing & commissioning of 'C' class heavy duty MS
pipe conforming to IS 3589/IS:1239 including Welding, fittings like
elbows, tees,flanges,tapers, nuts bolts,gaskets etc. and fixing the pipe
on the wall/ceiling with suitable clamp/support frame and painting
with two or more coats of synthetic enamel paint of required shade
complete as required :
7.9 200 mm dia (wall thickness 6.3 mm) 45.00 metre 2692.00 121,140.00
7.8 150 mm dia 115.00 metre 1856.00 213,440.00
7.7 100 mm dia 90.00 metre 1316.00 118,440.00
7.6 80 mm dia 80.00 metre 951.00 76,080.00
7.4 50 mm dia 78.00 metre 646.00 50,388.00
7.1 25 mm dia 360.00 metre 359.00 129,240.00
307 14 Providing, installation, testing and commissioning of non-return
valve of following sizes confirming to IS: 5312 complete with rubber
gasket, GI bolts, nuts, washers etc.as required :
14.7 150 mm dia 14.00 Set 17300.00 242,200.00
308 11 Supplying, fixing, testing and commissioning of Butterfly valve of PN
1.6 rating with bronze/gunmetal seat duly ISI marked complete with
nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes
as required :
11.7 200 mm dia 4.00 Set 14593.00 58,372.00

11.5 100 mm dia 4.00 Set 6056.00 24,224.00
11.4 80 mm dia 14.00 Set 4588.00 64,232.00
II. INTERNAL HYDRANT SYSTEM
309 9 Supplying and fixing single headed internal hydrant valve with
instantaneous Gunmetal/Stainless Steel coupling of 63 mm dia with
cast iron wheel ISI marked conforming to IS 5290 (Type -A) with
blank Gunmetal/Stainless Steel cap and chain as required :
9.1 Single headed Gunmetal 9.00 Set 7245.00 65,205.00

310 17 Supplying and fixing first-aid Hose Reel with MS construction spray
painted in post office red, conforming to IS 884 complete with the
following asrequired
20 mm nominal internal dia water hose thermoplastic (Textile
reinforced) type -2 as per IS: 12585
20 mm nominal internal dia gun metal globe valve & nozzle.
Drum and brackets for fixing the equipmets on wall.
Connections from riser with 25 mm dia stop gun metal valve &
M.S.Pipe and socket.
17.2 40m 9.00 Set 9616.00 86,544.00
311 16 Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63
mm dia male and female couplings duly bound with GI wire, rivets
etc. conforming to IS 636 (type-A) as required
16.1 Gunmetal 9.00 Set 5206.00 46,854.00
312 NS Providing & fixing fire house cabinate fabricated from 16 gauge M.S
sheet with double glazed front door & pad locking arrangement,
painted fire red with stove enameled paint and FIRE HOSE written on
front including necessary support ( to house ONE length of canvas 9.00 Set 4021.00 36,189.00
house with couplings, branch pipe & nozzle)
MAKE: OMEX/ NEWTECH./ EQV.
Page 35 of 65
S.O.R
CODE NO.
1 2 3 4 5 6 7
313 18 Supplying & fixing 63 mm dia gun metal short branch pipe with 20
mm nominal internal diameter size nozzle conforming to IS 903
suitable for instantaneous connection to interconnect hose pipe
coupling as required :
18.1 Gunmetal 14.00 Each 2393.00 33,502.00

314 NS Providing & fixing 25mm dia brass ball valve full bore type with lever
and screwed female ends.(20kg/ Sq. cm.) 9.00 Each 1722.00 15,498.00
315 NS Providing & fixing 25mm dia gun metal single acting air release valve
with screwed inlet tested for 20 kg/ cm2 7.00 Each 1722.00 12,054.00
316 NS Providing & fixing dial type pressure gauge with isolation cock and
chrome coated copper pipe on main header Dial dia 150 mm
calibration 0-15 kg./ cm2 6.00 Each 1722.00 10,332.00
317 20 Supplying and fixing air vessel made of 250 mm dia, 8 mm thick MS
sheet, 1200 mm in height with air release valve on top and flanged
connection to riser, drain arrangement with 25 mm dia gun metal
6.00 Set 17707.00 106,242.00
wheel valve with required accessories, pressure gauge and
paintingwith synthetic enamel paint of approved shade as required.
318 NS Providing and fixing heavy duty aluminium armored cables 1.1 KVA
grade including necessary support clamps at ceiling
a Power cable 3.5 core 25 Sq.mm 320.00 metre 560.00 179,200.00
b Power cable 3.5 core 35 Sq.mm 240.00 metre 690.00 165,600.00
319 NS Supply, Installation, Testing & Commissioning of resilient rubber
lined single arsh vibration elimination suitable for raw water up to 45
deg. C temperature, working pressure 8.8 kg/ cm2 & testing pressure
14 kg/ cm2 for
a 150mm dia 7.00 Each 11059.00 77,413.00

b 100mm dia 7.00 Each 10221.00 71,547.00
320 III. PUMPS & ACCESSORIES.

a. Terrace Pumps
Type: Split casing
Speed (rpm): 2965
Capacity: 450 lpm
Head : 40 mtr. 2.00 Each 125000.00 250,000.00
b Horizontally mounted, centrifugal type single stage fire pump having
cast iron body, bronze impeller, stainless steel shaft & capacity of
delivering 2280 LPM against a total head of 60 m complete with
necessary 'y' stainer on the suction side and pressure gauge with GM
cocks on the delivery side including by-pass arrangement for
periodical testing of the working of the testing of the working of the
pumping set as per TAC rules.
Squirrel cage induction motor totally enclosed fan cooled type suitable
for 415 volts +10% -15% , 3 phase, 50HZ A.C supply of suitable
capacity (approximate 75 kw) for the above pump couped with flexible
coupling including with a pedd of 1450-1600 rpm earthing as per
relevent IS Specification
Common bed plate for mounting pump & motor fabrication of Motor
fabricated of suitable M.S Channel as per manufacturers
recommendations.
Suitable RCC Pump- Foundation as per manufacturers design and 4
nos. Dunlop (crushy foot) heavy duty Antivibration mountaining pads 2.00 Set 313500.00 627,000.00
c Diesel Engine Driven Fire Pumping Set suitable for automatic

operation consisting of the following as per specification
Page 36 of 65
S.O.R
CODE NO.
1 2 3 4 5 6 7
Horizontally mounted, centrifugal type single stage/ multi stage fire
pump having cast iron body, bronze impeller, stailess steel shaft &
capable of delivering 2280 LPM against a total head of 60 M complete
with necessary 'Y' stainer on the suction side and pressure gauge with
stop cocks etc. on the delivery side including by-pass
arrangement(with 50 mm G.M stop valve and upto 5M G.I stop valve
and upto 5 M G.I medium pipes) for periodical testing of the pumping
set as per TAC rules.
Water cooled TAC approved diesel Engine suitable for developing

atleast (15 BHP at 1800RPM) for above pump complete with
automatic starting mechanism, batteries, automatic battery charger
unit, flexible coupling with the pump, fuel tank, silencer, ehaust pipe
with insulation approx. 25 m length & all standard accessories as
required as per TAC rules including earthing mandatory spares and
tool kit.
Common bed plate for mounting pump and Engine fabrication of

suitable M.S. channel as per manufacturerers recommendations.
Suitable RCC pump foundation as per manufactures design 8 nos.
Dunlop Anti vibration (crushy foot) heavy duty mounting pads. 2.00 Set 531000.00 1,062,000.00
BCD SOR-22 Supply, Installation Testing & Commissioning of Electrical Motor

3.2 Driven Automatic Pressurisation (jockey) pumping set consisting of
d. the following
Horizontally mounted, centrifugal type single stage/ multi stage fire
pump for building pressure loss due to any leakage in the system &
capable of deliver approx. 180 LPM against a total head of 60 M
having cast iron body, bronze impeller, stainless steel shaft &
complete with necessary 'Y' stainer on the suction including by-pass
arrangement(with 50 mm G.M stop valve and upto 5M
Squirrel cage induction motor totally enclosed fan cooled type suitable
for 415 volts +10% -15% , 3 phase, 50HZ A.C supply of suitable
capacity (approximate 10 kw) for the above pump with synchronous
speed of 1500/3000 RPM confirming to IS: 325 & duly coupled
including earthing
Common bed plate for mounting pump & motor fabrication of Motor
fabricated of suitable M.S Channel as per manufacturers
recommendations.
Suitable RCC Pump- Foundation as per manufacturers design and 4
nos. Dunlop (crushy foot) heavy duty Antivibration mountaining pads 2.00 Set 101470.00 202,940.00
321 IV FIRE ALARM SYSTEM

1 SITC of Analogue Adressable Smoke Detector complete with base.
360.00 Each 3073.00 1,106,280.00
2 Supply & Installation of Fault Isolator Module complete with junction
box for mounting of surface (after every 15 detectors) 32.00 Each 3800.00 121,600.00
3 SITC of Analogue Adressable manual call point complete with
mounting base. 16.00 Each 5586.00 89,376.00
4 Supplying & laying of 1.5 sq. mm dual copper wire with 19 mm dia
pvc conduit. 2800.00 metre 125.00 350,000.00
322 V FIRE EXTINGUISHERS

1 Providing and fixing CO2 extinguisher consisting of seamless MS
cylindrical body squeeze lever discharge valve, internal discharge
tube, 30 cm long high pressure discharge hose, dischargee nozzle ISI
marked as per IS 13869 including fixing with dash fasteners etc.
complete
323 a Capacity 4.5 kg 14.00 Each 15722.00 220,108.00
Page 37 of 65
S.O.R
CODE NO.
1 2 3 4 5 6 7
324 2 Providing and fixing stored pressure multipurpose fire extinguisher
consisting of welded MS cylindrical body squeeze lever discharge
valve, 30 cm long high pressure discharge hose, marked as per IS
15683 including fixing to wall with brackets etc.complete
a Capacity 6 kg 8.00 Each 5362.00 42,896.00

325 18.48.1 S/F/F Standard make PVC water tank complete job as per direction of
E/I with relevant PHE works. 20000.00 Ltr 9.70 194,000.00
FIRE FIGHTING WORKS Boys Hostel
I. PIPING & VALVES
326 7 Providing, laying, testing & commissioning of 'C' class heavy duty MS
pipe conforming to IS 3589/IS:1239 including Welding, fittings like
elbows, tees,flanges,tapers, nuts bolts,gaskets etc. and fixing the pipe
on the wall/ceiling with suitable clamp/support frame and painting
with two or more coats of synthetic enamel paint of required shade
complete as required :
7.7 100 mm dia 34.00 metre 1316.00 44,744.00

7.6 80 mm dia 22.00 metre 951.00 20,922.00
327 14 Providing, installation, testing and commissioning of non-return
valve of following sizes confirming to IS: 5312 complete with rubber
gasket, GI bolts, nuts, washers etc.as required :
14.5 100 mm dia 2.00 Set 10478.00 20,956.00
328 11 Supplying, fixing, testing and commissioning of Butterfly valve of PN
1.6 rating with bronze/gunmetal seat duly ISI marked complete with
nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes
as required :
11.5 100 mm dia 2.00 Set 6056.00 12,112.00

11.4 80 mm dia 2.00 Set 4588.00 9,176.00
II. INTERNAL HYDRANT SYSTEM
329 9 Supplying and fixing single headed internal hydrant valve with
instantaneous Gunmetal/Stainless Steel coupling of 63 mm dia with
cast iron wheel ISI marked conforming to IS 5290 (Type -A) with
blank Gunmetal/Stainless Steel cap and chain as required :
9.1 Single headed Gunmetal 4.00 Set 7245.00 28,980.00

330 17 Supplying and fixing first-aid Hose Reel with MS construction spray
painted in post office red, conforming to IS 884 complete with the
following asrequired
20 mm nominal internal dia water hose thermoplastic (Textile
reinforced) type -2 as per IS: 12585
20 mm nominal internal dia gun metal globe valve & nozzle.
Drum and brackets for fixing the equipmets on wall.
Connections from riser with 25 mm dia stop gun metal valve &
M.S.Pipe and socket.
17.2 40m 4.00 Set 9616.00 38,464.00
331 16 Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63
mm dia male and female couplings duly bound with GI wire, rivets
etc. conforming to IS 636 (type-A) as required
16.1 Gunmetal 4.00 Set 5206.00 20,824.00
332 Approved by Providing & fixing fire house cabinate fabricated from 16 gauge M.S
SE sheet with double glazed front door & pad locking arrangement,
painted fire red with stove enameled paint and FIRE HOSE written on
front including necessary support ( to house ONE length of canvas
house with couplings, branch pipe & nozzle) 4.00 Set 4021.00 16,084.00
Page 38 of 65
S.O.R
CODE NO.
1 2 3 4 5 6 7
333 Approved by Supplying and fixing 100 mm dia three way of fire brigade connection
SE of cast iron body withgun metal male instantaneous inlet couplings
complete with cap and chain as required for suitable dia MS pipe 1.00 Each 24715.00 24,715.00
connection conforming to IS 904 as required.
334 Approved by Providing & fixing 25mm dia brass ball valve full bore type with lever
SE and screwed female ends.(20kg/ Sq. cm.) 4.00 Each 1722.00 6,888.00
335 Approved by Providing & fixing 25mm dia gun metal single acting air release valve
SE with screwed inlet tested for 20 kg/ cm2 1.00 Each 1722.00 1,722.00
336 Approved by Providing & fixing dial type pressure gauge with isolation cock and
SE chrome coated copper pipe on main header Dial dia 150 mm
calibration 0-15 kg./ cm2 1.00 Each 1722.00 1,722.00
337 Approved by Providing and fixing heavy duty aluminium armored cables 1.1 KVA
SE grade including necessary support clamps at ceiling
a Power cable 3.5 core 25 Sq.mm 70.00 metre 560.00 39,200.00
338 20 Supplying and fixing air vessel made of 250 mm dia, 8 mm thick MS
sheet, 1200 mm in height with air release valve on top and flanged
connection to riser, drain arrangement with 25 mm dia gun metal
6.00 Set 17707.00 106,242.00
wheel valve with required accessories, pressure gauge and
paintingwith synthetic enamel paint of approved shade as required.
339 Approved by Supply, Installation, Testing & Commissioning of resilient rubber

SE lined single arsh vibration elimination suitable for raw water up to 45
deg. C temperature, working pressure 8.8 kg/ cm2 & testing pressure
14 kg/ cm2 for
a 150mm dia 4.00 Each 11059.00 44,236.00

b 100mm dia 4.00 Each 10221.00 40,884.00
340 III. PUMPS & ACCESSORIES.
a. Terrace Pumps
Type: Split casing
Speed (rpm): 2965
Capacity: 450 lpm
Head : 40 mtr. 1.00 Each 125000.00 125,000.00
341 IV FIRE ALARM SYSTEM
1 Supply & Installation testing and commissioning of 2 zone fire alarm
control with LED display having in built battery charger and batterries 1.00 Each 18500.00 18,500.00
2 zone.
2 SITC of Analogue Adressable amual call point complete with
mounting base. 4.00 Each 1250.00 5,000.00
3 Supply & Installation of wall mounted Horn/Hooter 4.00 Each 1550.00 6,200.00
4 Supplying & laying of 1.5 sq. mm dual copper wire with 19 mm dia
pvc conduit. 550.00 metre 125.00 68,750.00
342 V FIRE EXTINGUISHERS
343 1 Providing and fixing CO2 extinguisher consisting of seamless MS
cylindrical body squeeze lever discharge valve, internal discharge
tube, 30 cm long high pressure discharge hose, dischargee nozzle ISI
marked as per IS 13869 including fixing with dash fasteners etc.
complete MAKE: OMEX/ NEWTECH./ EQV.
a Capacity 4.5 kg 4.00 Each 15722.00 62,888.00

344 2 Providing and fixing stored pressure multipurpose fire extinguisher
consisting of welded MS cylindrical body squeeze lever discharge
valve, 30 cm long high pressure discharge hose, marked as per IS
15683 including fixing to wall with brackets etc.complete MAKE:
OMEX/ NEWTECH./ EQV.
a Capacity 6 kg 16.00 Each 5362.00 85,792.00
Page 39 of 65
S.O.R
CODE NO.
1 2 3 4 5 6 7
345 18.48.1 S/F/F Standard make PVC water tank complete job as per direction of
E/I with relevant PHE works. 1000.00 Ltr 9.70 9,700.00
Total Civil Work :- 241599700.15

PART 'A' :- Administrative Block
346 Wiring for light point/ fan point/ exhaust fan point/ Call
bell Point with 1.5 sq. mm FR PVC insulated copper
conductor single core cable in surface/ recessed PVC
conduit, with modular switch, modular plate, suitable
size G.I box etc. as required. Group - 'C'
1015 Point 724.00 734,860.00

Light Point -755
Fan Point - 219
Exhaust Fan Point - 31
Call Bell Point - 10
Total: = 1195
347 Wiring for light/ power plug with 2 X 4 sq. mm PVC
insulated copper conductor single core cable in surface /
recessed PVC conduit along with 1 No. 4 sq. mm FR PVC
insulated copper conductor single core cable for loop
earthing as required.
2214 Metre 200.00 442,800.00
348 Supplying and fixing suitable size G.I. box with modular
plate and cover in front on surface or in recess including
providing and fixing 6 pin, 5/6 & 15/16 amps modular
socket outlet and 15/16 amps modular switch
connection, painting etc, as required.
123 Each 413.00 50,799.00

plate and cover infront on surface or in recess including
providing and fixing 3 pin, 5/6 amps modular socket
outlet and 5/6 amps modular switch connection, painting
etc, as required.
135 Each 362.00 48,870.00

350 Wiring for circuit/ submain wiring along with earth wire
with the following sizes PVC insulated copper conductor,
single core cable in surface/ recessed PVC conduit as
required.
a 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire for Circuit.

2790 Metre 130.00 362,700.00
b 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire for computer
point & street Light on building
975 Metre 161.00 156,975.00
c 2 X 4 sq. mm + 1 X 4 sq. mm earth wire for A.C. point
660 Metre 200.00 132,000.00
d 2 X 4 sq. mm + 1 X 4 sq. mm earth wire for computer
connection in rowwise in the EXAM HALL
340 Metre 200.00 68,000.00
e 4 X 6 sq. mm + 1 X 6 sq. mm earth wire for Light TPN D.B.
655 Metre 410.00 268,550.00
Page 40 of 65
S.O.R
CODE NO.
1 2 3 4 5 6 7
f 4 X 4 sq. mm + 1 X 4 sq. mm earth wire for 3 phase
machine point wiring
720 Metre 294.00 211,680.00
g 4 X 10 sq. mm + 1 X 10 sq. mm earth wire for A.C. &
power TPN D.B.
440 Metre 593.00 260,920.00
h 4 X 16 sq. mm + 1 X 16 sq. mm earth wire for workshop
vertical TP&N DB in workshop block
268 Metre 879.00 235,572.00
i 4 X 16 sq. mm + 1 X 16 sq. mm earth wire for 1st, 2nd, &
3rd floor Light VPTN DB's
42 Metre 879.00 36,918.00
j 4 X 25 sq. mm + 1 X 16 sq. mm earth wire for 1st, 2nd,
3rd floor Power VPTN BD's
177 Metre 1232.00 218,064.00
351 Supplying and fixing 2 pin, 5 amp. ceiling rose on the
existing junction box/PVC box including connection etc as
required.
763 Each 42.00 32,046.00
352 Supplying and fixing batten /angle holder including
connection etc. as required
260 Each 46.00 11,960.00
353 Supplying and fixing stepped type electronic fan
regulator on the existing modular switch box including
connection but excluding modular plate etc. as required.
219 Each 359.00 78,621.00

354
Supplying and fixing modular type 25 amps A.C. unit box
with ON/OFF MCB on surface or in recess complete with
connections, testing and commissioning etc. as reqd. 33 Each 594.00 19,602.00
355 Supplying and fixing musical call bell suitable for
D.C./A.C. single phase, 230 volts, complete as required.
10 Each 219.00 2,190.00
356 Supplying and fixing following way three pole & neutral,
sheet steel, MCB distribution board, 415 volts, on
surface/ recess, complete with tinned copper busbar,
neutral busbar, earth bar, din bar, detachable gland
plate, interconnections, phosphatized and powder
painted including earthing etc. as required. (But without
MCB / RCCB / Isolator)
4 way ( 4 + 12 ), double door, horizontal type 34 Each 2388.00 81,192.00

357 Supplying and fixing following ways, Surface/ recess
mounting vertical type, 415 volt, TPN MCB distribution
board of seet steel , dust protected, duly powder
painted, inclusive of 200 amps tinned copper bus bar,
common neutral link, earth bar, din bar , for mounting
MCB's (But without MCCB's & MCB's) as required.
( Note: vertical type MCBTPDB is normally used where 3
phase outlet are required.)
2.10.4 4 way (8+12) double door, vertical type

4 Each 6321.00 25,284.00
2.10.5 8 way (8+24) double door, vertical type
5 Each 7686.00 38,430.00
Page 41 of 65
S.O.R
CODE NO.
1 2 3 4 5 6 7
2.10.4 4 way (8+12), double door, vertical type

4 Each 6321.00 25,284.00
2.10.5 8 way (8+24), double door, (for work shop) verticle type
3 Each 7686.00 23,058.00
359 Supplying and fixing following way single pole & neutral,
sheet steel, MCB distribution board, 240 volts, on surface
recess, complete with tinned copper busbar, neutral
busbar, earth bar, din bar, detachable gland plate,
interconnections, phosphatized and powder painted
including earthing etc. as required. (But without MCB /
RCCB / Isolator)
2 + 8 ways, single door (street light) 2 Each 741.00 1482.00

360 Supplying and fixing following rating, 240 volts, ‘C’ series,
miniature circuit breaker suitable for lighting and other
loads of following poles in the existing MCB DB complete
with connections, testing and commissioning etc. as
required.
6/32 amps, single pole 478 Each 192.00 91,776.00

6/32 amps, TP&N 48 Each 1108.00 53,184.00
361 Supplying and fixing TP&N Sheet steel inclosure on
surface / recess along with 25/32 amp 415 volts, C" curve
TPN MCB complete with connection, testing and
commissioning etc. as required.
45 Each 1392.00 62,640.00
362 Supplying and fixing of following sizes of medium class
pvc conduit along with assocessries in surface / recess
including cutting the wall and making good the same
incase of recessed conduit as required.
20 mm 370 mtr. 68.00 25,160.00

363 Supplying and fixing following rating, two/four pole,
220/415 volts, isolator in the existing MCB DB complete
required.
63 amps, 4 pole 37 Each 746.00 27,602.00

40 amps, 2 pole 2 Each 355.00 710.00
Page 42 of 65
S.O.R
CODE NO.
1 2 3 4 5 6 7
364
Providing and fixing following rating and capacity
four pole MCCB in existing panel board, including
drilling holes in cubicle panel, making connections,
etc. as required.
a 630 amps, 35 KA 1 Each 24910.00 24,910.00
b 315 amps, 35 KA 2 Each 17957.00 35,914.00
c 250 amps, 35 KA 2 Each 14598.00 29,196.00
d 200 amps, 35 KA 2 Each 11915.00 23,830.00
e 160 amps, 35 KA 14 Each 9787.00 137,018.00
f 125 amps, 16 KA 7 Each 4004.00 28,028.00
g 25/100 amps, 16 KA 7 Each 3254.00 22,778.00
h 400 amps, 35 KA 1 Each 19697.00 19,697.00
365 Supplying and drawing of following sizes of ISI marked,
pvc insulated single core copper conductor cable for
interconnection the main switch / busbar / pane etc as
requred.
4 x 25 sq. mm 12 mtr. 953.00 11,436.00

366 Supplying and fixing following rating, 415/240 volts, ‘C’
series, miniature circuit breaker suitable for inductive
loads of following poles in the existing MCB DB complete
required.
50/63 amps, TPN 18 Each 1635.00 29,430.00

40 amps, TPN 20 Each 1487.00 29,740.00
40 amps, DP 2 Each 805.00 1,610.00
367 Providing and fixing following capacity 4 pole ON-
load/panel mounted changeover switches in existing
cubicle panel board, making connection, earthing
the body etc. as required.
630 amps, 4 pole 1 Each 24806.00 24,806.00

320 amps, 4 pole 1 Each 14514.00 14,514.00
250 amps, 4 pole 1 Each 11636.00 11,636.00
200 amps, 4 pole 1 Each 9463.00 9,463.00
368 Supplying and fixing wall mounted iron sheet cubical
panel board, fabricated with following gauge iron
sheet, suitable for panel mounted switch disconnect
or, including bus-bar chamber, insulator, nut-bolt
and painting etc. as required. (but without busbar
copper strip)
with 16 SWG Iron sheet (for 4 nos. panel) 80 sq.ft. 1382.00 110,560.00
369 Supplying of copper strip of all sizes for bus bar
strip/interconnection including drilling holes etc as
reqd.
70 Kg 776.00 54,320.00
Page 43 of 65
S.O.R
CODE NO.
1 2 3 4 5 6 7
providing and fixing 4 nos. 3 pin, 5/6 amps modular
socket outlet and 4 nos. 5/6 amps modular switch,
connection etc as required. (Used for computer point)
34 Each 1235.00 41,990.00

371 Supplying and fixing following modules G.I. box along
with modular base and cover plate for modular switches
in recess etc as required.
1 or 2 module (for Fan regulator) 219 Each 180.00 39,420.00

372 Supplying and fixing following modular blanking plate on
the existing modular plate and switch box but excluding
modular plate etc. as required.
100 Each 26.00 2,600.00
373 S/F 15 watt LED lamp in existing electrical fitting/fixtures
etc as reqd.
250 Each 302.00 75,500.00
374 Supplying and connection of following sizes FR PVC
insulated copper conductor single core etc. As required.
4 X 10 sq. mm 20 Metre 400.00 8,000.00

4 X 16 sq. mm 15 Metre 617.00 9,255.00
4 X 25 sq. mm 10 Metre 953.00 9,530.00
375 Supply of following size and core XLPE/PVC insulated PVC
sheathed (Heavy duty) armoured electric cable with
aluminium conductor etc. as required.
300 sq.mm, 3.5 core ( for Supply Line ) 100 Metre 1295.00 129,500.00
120 sq.mm, 3.5 core ( for workshop ) 129 Metre 568.00 73,272.00
376
Laying of one number PVC insulated and PVC sheathed/
XLPE power cble of 1.1 KV grade of following size direct
in ground including excavation, sand cushioning,
protective covering and refilling the trench etc. as
required.
Above 95 sq. mm and upto 185 sq.mm 60 Metre 157.00 9,420.00
Above 185 sq. mm and upto 400 sq.mm 100 Metre 178.00 17,800.00
377 Supply and installation of standard model A.C. ceiling fan
of 1200 mm sweep including wiring the down rods of
standard length (upto 30 cm) with 1.5 sq. mm FR PVC
insulated copper conductor etc as required.
219 Each 1618.00 354,342.00

378 Supply and installation of 450 mm, 230 v A.C. exhaust fan
in the existing opening including making good the
damage, connection testing, commissioning etc as
required.
20 Each 4413.00 88,260.00
required.
14 Each 1483.00 20,762.00
Page 44 of 65
S.O.R
CODE NO.
1 2 3 4 5 6 7
380 Earthing with copper earth plate 600 mm X600mm X 3
mm thick including accessories, and providing masonary
enclosure with cover plate having locking arrangement
and watering pipe 2.7 mtr. long etc. With charcoal and
salt as required.
14 Set 12831.00 179,634.00
381 Providing and fixing 4.00 dia copper wire onsurface or
recess for loop earthing etc. as required.
510 Metre 116.00 59160.00
382 Supplying and laying earth connection from earth
electrode with 4.00 mm dia copper wire in 15 mm dia
G.I. pipe from earth electrode including connection with
copper thimble , excavation and refilling etc as required.
30 Metre 269.00 8,070.00

383 Supply and fixing digital voltmeter, single phase in the
existing cubical panel board including drilling holes in the
panel board, making connection etc. as required.
4 Each 1337.00 5,348.00

384 Supply and fixing digital ammeter, three phase in the
4 Each 1643.00 6,572.00

385 Supplying and fixing 90 watt LED type street light with
die cast aluminium housing for ingress protection of IP
65 with all accessories etc on pole/building including
connection with FR PVC insulated copper conductor
cable and earthing the body etc. as reqd.
15 Each 8437.00 126,555.00

386 S/F of 32 mm dia x 1.00 mtr long G.I (light Class) bracket
for mounting of fluorescent/HPSV street light fitting on
pole including bending the pipe to the required shape,
40 mm x 3.0 mm flat iron clamps and wiring with
WP/PVC wire and painting the flat iron with primer and
finish paint etc. as reqd.
15 mtr 338.00 5070.00

387 Supplying and fixing surface mounted 15 watt LED
downlighter with integrated electronic driver including
all accessories and connection etc as required .
172 Each 1380.00 237,360.00

388 Supplying and fixing 4' x 40 watt suspended type LED
luminaire provides soft- light and glare free symmetrical
illumination complete with all accessories etc. including
ball and socket arrangement, 2 No. down rods of 20 mm
dia x 1.6mm thick G.I, pipe upto 30 cm length, painting
and wiring the down rods and connection with 1.5 sq.
mm FR PVC insulated copper conductor, single cor cable
and earthing etc.as required.
323 Each 4949.00 1,598,527.00
Page 45 of 65
S.O.R
CODE NO.
1 2 3 4 5 6 7
Total Rs. 7,562,477.00
PART 'B' :- Staff Hostel

conduit, with modular type switch, modular plate,
suitable size PVC/G.I box etc. as required. Group 'A'
Light Point - 215

Fan/Exhaust Point - 69
Call bell Point -17
Total: = 301 301 Each 513.00 154,413.00
550 Metre 200.00 110000.00
66 Each 413.00 27258.00

etc, as required. (83 nos. on switch board and 16 nos. on
wall )
99 Each 362.00 35,838.00

required.
2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire for Circuit

wiring
600 Metre 130.00 78,000.00
2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire for 5 amp
socket on wall
160 Metre 130.00 20,800.00
2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire for computer
wiring & street light
320 Metre 161.00 51,520.00
2 X 4 sq. mm + 1 X 4 sq. mm earth wire for A.C. point
250 Metre 200.00 50000.00
2 X 6 sq. mm + 1 X 6 sq. mm earth wire 400 Metre 271.00 108,400.00
required.
141 Each 42.00 5,922.00
Page 46 of 65
S.O.R
CODE NO.
1 2 3 4 5 6 7
395 Supplying and fixing batten/angle holder including
connection etc. as required.
131 Each 46.00 6,026.00
396
S/F single wall mounted 18/22 watt LED type batten fitting
complete with electronic driver and LED tube etc. Directly
on wall / ceiling including connection with 1.5 sq.mm FR
pvc insulated copper conductor and earthing the body etc
as reqd. 36 Each 684.00 24,624.00
regulator on the existing modular plate switch box
including connections but excluding modular plate etc.
as required.
37 Each 359.00 13,283.00
398 Supplying and fixing following modular plate
switch/socket on the existing modular plate and switch
box including connections but excluding modular plate
etc. as required.
1 or 2 module 37 Each 180.00 6,660.00

12 module (for computer terminal) 17 Each 423.00 7,191.00
50 Each 26.00 1,300.00
RCCB / Isolator)
2 + 4 ways, Single door ( for common light ) 4 Each 633.00 2532.00

2 + 8 ways, Double door 16 Each 1242.00 19872.00
miniature circuit breaker suitable for inductive loads of
following poles in the existing MCB DB complete with
connections, testing and commissioning etc. as required.

40 amps, DP 22 Each 805.00 17,710.00
402 Supplying and fixing following rating, two pole, 240 volts,
isolator in the existing MCB DB complete with
40 amp, 2 pole 20 Each 355.00 7,100.00

403
etc. as required.
200 amps, 35 KA (for 1 no. main Panel) 1 each 11915.00 11915.00
Page 47 of 65
S.O.R
CODE NO.
1 2 3 4 5 6 7
panel board, fabricated with 16 SWG iron sheet,
suitable for panel mounted switch disconnect or,
including bus-bar chamber, insulator, nut-bolt and
painting etc. as required. (but without busbar
copper strip)
12 Sq.ft 1382.00 16584.00
reqd.
20 P. kg 776.00 15520.00
406 Providing and fixing following capacity 4 pole OFF-load
changeover switches with side handle operation, in sheet
enclosure in existing metal board including drilling holes
in metal board, making connections, earthing the body
etc. as required.
200 amp, 4 pole 1 Each 9463.00 9,463.00

407 S/F following types lamp in existing electrical
fitting/fixtures etc as reqd.
15 watt LED 142 Each 302.00 42884.00
408 Earthing with G.I. earth pipe 4.5 mtr long, 40 mm dia
including accessories, and providing masonary enclosure
with cover plate having locking arrangement and
watering pipe etc. With charcoal and salt as required.
3 Set 5125.00 15,375.00

409 Providing and fixing 25 mmX 5 mm G.I. strip in 40 mm
dia G.I. pipe from earth electrode, including connection
with G.I. nut, bolt, spring, washer, excavation and
refilling etc as required. as required.
50 Metre 487.00 24,350.00

410 Supplying and laying 6 SWG G.I wire at 0.50 metre below
ground level for conductor earth electrode, including
soldering etc. as required.
30 Metre 17.00 510.00
37 Each 1618.00 59,866.00

412 Supplying and connection following sizes of FR PVC
insulated copper conductor single core as required.
4 X 25 sq. mm 4 Metre 953.00 3812.00

2 X 10 sq. mm 32 Metre 200.00 6400.00
required.
32 Each 1483.00 47,456.00
Page 48 of 65
S.O.R
CODE NO.
1 2 3 4 5 6 7
17 Each 219.00 3723.00
415 Supplying and drawing following sizes of FR PVC
insulated copper conductor single core in the existing
surface/ recessed PVC conduit as required.
1 X 1.5 sq. mm (For Inverter wiring ). 500 Each 24.00 12000.00

416 Supply and fixing digital voltmeter, three phase in the
1 Each 1337.00 1337.00

1 Each 1643.00 1643.00

418 Supplying and fixing mounted 18 watt LED downlighter
with integrated electronic driver including all accessories
and connection etc as required .
36 Each 1380.00 49,680.00

419
420 Supplying and fixing following modular type switch/
socket on the existing modular plate and switch box
including connection but excluding modular plate etc. as
required.
5/6 amp, 5 pin socket outlet (4 nos. for each computer

terminal)
68 Each 122.00 8296.00
6/10 amps, one way switch (4 nos. for each computer
terminal)
68 Each 81.00 5508.00
421 Supplying and fixing 40/45 watt LED type street light with
10 Each 4056.00 40,560.00

10 Metre 338.00 3380.00
Page 49 of 65
S.O.R
CODE NO.
1 2 3 4 5 6 7
423 Supplying and fixing bulk head fitting die cast aluminium
alloy body with prismatic glass cover suitable for the
GLS/CFL lamp directly on the wall/ceiling etc as required .
12 Each 445.00 5,340.00

70 sq.mm, 3.5 core

120 P. mtr. 376.00 45120.00
425 Laying of one number PVC insulated and PVC sheathed/
required.
Above 35 sq. mm and Upto 95 sq. mm 120 per mtr 151.00 18120.00
Total Rs. 1,234,443.00
PART 'C' :- Canteen Block
suitable size PVC/G.I box etc. as required. Group 'C'
Light Point - 89
Call bell Point -17
Total: =131 131 Each 724.00 94,844.00
210 Metre 200.00 42000.00
14 Each 413.00 5782.00

etc, as required.
18 Each 362.00 6,516.00
Page 50 of 65
S.O.R
CODE NO.
1 2 3 4 5 6 7
required.

wiring
260 Metre 130.00 33,800.00
required.
91 Each 42.00 3,822.00
32 Each 46.00 1,472.00
as required.
25 Each 359.00 8,975.00
etc. as required.
1 or 2 module 25 Each 180.00 4,500.00

20 Each 26.00 520.00
RCCB / Isolator)
4 ways, ((4+12), double door, horizontal type 2 Each 2388.00 4776.00


40 amp, 2 pole 1 Each 355.00 355.00

40 amp, 4 pole 1 Each 495.00 495.00
Page 51 of 65
S.O.R
CODE NO.
1 2 3 4 5 6 7
439
etc. as required.
125 amps, 16 KA (for 1 no. main Panel) 1 each 4004.00 4004.00
copper strip)
10 Sq.ft 1382.00 13820.00
reqd.
6 P. kg 776.00 4656.00
changeover switches existing cubical panel board
including drilling holes in cubical panel board, making
connections, earthing the body etc. as required.
100 amp, 4 pole OFF-load changeover 1 Each 7814.00 7,814.00

15 watt LED 30 Each 302.00 9060.00
2 Set 5125.00 10,250.00

10 Metre 487.00 4,870.00

30 Metre 17.00 510.00
25 Each 1618.00 40,450.00

4 X 16 sq. mm 4 Metre 617.00 2468.00

2 X 10 sq. mm 3 Metre 200.00 600.00
Page 52 of 65
S.O.R
CODE NO.
1 2 3 4 5 6 7
required.
15 Each 4413.00 66,195.00

1 Each 1337.00 1337.00

1 Each 1643.00 1643.00

8 Each 4056.00 32,448.00

8 Metre 338.00 2704.00

50 sq.mm, 3.5 core

80 P. mtr. 277.00 22160.00
required.
Upto 35 sq. mm upto 95 sq.mm 80 per mtr 151.00 12080.00
Page 53 of 65
S.O.R
CODE NO.
1 2 3 4 5 6 7
457 Supplying and fixing 40 watt LED suspended type
luminaire provides soft light and glare free symmetrical
illumination with electronic driver and including all
accessories and connection with 1.5 sq. mm FR PVC
insulated copper conductor etc as required .
30 Each 4949.00 148,470.00

458
Supplying and fixing surface mounted 15/18 watt
LED downlighter with integrated electronic driver
including all accessories and connection etc as
reqiured 16 Each 1380.00 22,080.00
459 Supplying and fixing indoor recess mounted 36 watt LED
Flat panel luminaire suitable for armstrong/grid ceiling
and complete with electronic driver etc. directly on false
ceiling including connection with 1.5sq.mm FR PVC
insulated copper conductor and earthing the body etc as
required.
10 Each 4023.00 40,230.00
Total Rs. 691,486.00

PART 'D' :- Principal and Vice Principal
Residence
suitable size PVC/G.I box etc. as required. Group 'B'
Light Point - 60
Call bell Point -02
Total: = 81 81 Each 602.00 48,762.00
160 Metre 200.00 32000.00
16 Each 413.00 6608.00
Page 54 of 65
S.O.R
CODE NO.
1 2 3 4 5 6 7
etc, as required. (83 nos. on switch board and 16 nos. on
wall )
17 Each 362.00 6,154.00

required.

wiring
180 Metre 130.00 23,400.00
2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire for computer
wiring & street light
160 Metre 161.00 25,760.00
2 X 4 sq. mm + 1 X 4 sq. mm earth wire for A.C. point
105 Metre 200.00 21000.00
required.
34 Each 42.00 1,428.00
36 Each 46.00 1,656.00
467 Supplying and fixing single wall mounted 18/22 watt LED
type batten fitting complete with electronic driver and
LED tube etc directly on ceiling/ wall including
connection with 1.5 sq. mm PVC insulated copper
conductor and earthing the body etc. as required.
15 Each 684.00 10,260.00

as required.
13 Each 359.00 4,667.00
etc. as required.
1 or 2 module 13 Each 180.00 2,340.00

12 module (for computer terminal) 4 Each 423.00 1,692.00
20 Each 26.00 520.00
Page 55 of 65
S.O.R
CODE NO.
1 2 3 4 5 6 7
RCCB / Isolator)

472 Supplying and fixing following way three pole & neutral,
sheet steel, MCB distribution board, 415 volts, on
surface/ recess, complete with tinned copper busbar,
neutral busbar, earth bar, din bar, detachable gland
plate, interconnections, phosphatized and powder
painted including earthing etc. as required. (But without
MCB / RCCB / Isolator)


40 amps, DP 2 Each 805.00 1,610.00
40 amp, 2 pole 2 Each 355.00 710.00

40 amp, 4 pole 2 Each 495.00 990.00
475
etc. as required.
25/100 amps, 16 KA (for 1 no. main Panel) 2 each 3254.00 6508.00
copper strip)
20 Sq.ft 1382.00 27640.00
reqd.
12 P. kg 776.00 9312.00
Page 56 of 65
S.O.R
CODE NO.
1 2 3 4 5 6 7
changeover switches with side handle operation, in sheet
enclosure in existing metal board including drilling holes
in metal board, making connections, earthing the body
etc. as required.
63 amp, 4 pole 1 Each 4176.00 4,176.00

10/12 watt LED 41 Each 178.00 7298.00
2 Set 5125.00 10,250.00

40 Metre 487.00 19,480.00

20 Metre 17.00 340.00
36 Each 1618.00 58,248.00

2 X 10 sq. mm 8 Metre 200.00 1600.00

required.
6 Each 1483.00 8,898.00
2 Each 219.00 438.00
Page 57 of 65
S.O.R
CODE NO.
1 2 3 4 5 6 7
2 Each 1337.00 2674.00

2 Each 1643.00 3286.00

490
491 Supplying and fixing following modular type switch/
socket on the existing modular plate and switch box
including connection but excluding modular plate etc. as
required.
5/6 amp, 5 pin socket outlet (4 nos. for each computer

terminal)
16 Each 122.00 1952.00
6/10 amps, one way switch (4 nos. for each computer
terminal)
16 Each 81.00 1296.00
8 Each 4056.00 32,448.00

8 mtr 338.00 2704.00

494 Supplying and fixing bulk head fitting die cast aluminium
alloy body with prismatic glass cover suitable for the
GLS/CFL lamp directly on the wall/ceiling etc as required .
9 Each 445.00 4,005.00

16 sq.mm, 4 core
200 P. mtr. 141.00 28200.00
required.
Page 58 of 65
S.O.R
CODE NO.
1 2 3 4 5 6 7
Above 35 sq. mm and Upto 95 sq. mm 200 per mtr 151.00 30200.00
Total Rs. 486,828.00
PART : 'E' - FOR CAMPUS LIGHT & LIGHTNING ARRESTER
497 Supply and erection of 6 metre height Hot-dip galvanized

octagonal street light pole with following arm with top
dia 70 mm and bottom dia A/F 130 mm, made of 3 mm
thick sheet along with base plate of size 220 X 220 X 12
mm , small door opening for junction box mounting and
suitable size foundation bolts with templateand all
complete as required. (but without pole collar)
Single arm, 1500 mm 20 Each 20535.00 410,700.00

498 Supplying and fixing 90 watt LED type street light with
20 Each 8437.00 168,740.00

499 Providing and making pole collar with cement concrete
1:3:6 ( 1 cement : 3 coarse sand : 6 stone aggregate 20
mm ) of specified size and shape including farm work,
plastering if required, curing etc as required. (Volume of
the pole /pipe not to be deducted), (0.35 cum for one
pole)
6.5 Cum 3602.00 23,413.00

500 Supplying and connection of following sizes ISI
marked FR PVC insulated, single core copper
conductor cable etc as reqd.
2 x 2.5 sq. mm 0 Metre 0.00 0.00
2 Each 5125.00 10,250.00

20 Metre 17.00 340.00
10 sq. mm., 2 core 550 Metre 96.00 52,800.00

504
Laying of one number PVC insulated and PVC sheathed/
required.
Page 59 of 65
S.O.R
CODE NO.
1 2 3 4 5 6 7
Upto 35 sq. mm 550 Metre 144.00 79,200.00
505 Supplying and laying 6 SWG dia G.I. wire on surface
or in recess for loop earthing along with the cable as
required.
550 Metre 38.00 20,900.00
506 Supplying and making indoor end termination with cast
resin compound including aluminium lugs and other
jointing materials for following size of PVC insulated and
PVC sheathed /XLPE aluminium conductor cable of 1.1
KV grade as required.
2X 10 sq. mm 42 Each 198.00 8,316.00

507 Supplying and embedding following dia G.I. pipe
( medium class) in pole collar/ foundation for cable entry
including bending the pipe to the required shape
complete as required.
32 mm dia 20 Meter 338.00 6760.00

508
Providing and fixing lightning conductor finial, made
of 25 mm dia 300 mm long, G.I. tube, having single
prong at top, with 85 mm dia 6 mm thick G.I. base
plate including holes etc. complete as required.
8 Each 188.00 1,504.00
509
Jointing copper/ G.I. tape ( with another copper/ G I
tape, base of the finial or any other metallic object )
by riverting/ nut bolting sweating and soldering etc.
as required.
16 Each 87.00 1,392.00
510
Providing and fixing G.I. tape 20 mm X 3 mm thick
on parapet or surface of wall for lightning
conductor complete as required. ( For horizontal
run)
250 Metre 71.00 17750.00
511
Providing and fixing G.I. tape 20 mm X 3 mm thick
on parapet or surface of wall for lightning
conductor complete as required. ( For vertical run)
60 Metre 99.00 5940.00
512
Providing and fixing testing joint, made of 20 mm X
3 mm thick G.I. strip, 125 mm long, with 4 nos. of
tinned G.I. bolts, nuts, chuk nuts and spring washers
etc. complete as required.
6 Each 80.00 480.00
( for Lightning arrester)
4 Set 5125.00 20,500.00
Page 60 of 65
S.O.R
CODE NO.
1 2 3 4 5 6 7
40 Metre 487.00 19,480.00

Total Rs. 848,465.00
PART : 'F' - FOR 100 BEDDED BOYS HOSTEL (G+3)
515
Wiring for light point/fan point /exhaust fan point/call bell
point with 1.5sq mm FR PVC insulated copper conductor
S/C cable in surface/recessed medium class PVC conduit
with modular switch, modular plate, suitable size G.I box
etc. as required.
a> Light point 445
b> Fan/Wall fan point 138
c > Exhuast fan point 26
d > Call bell point 1
1.3.1 Group - A 610 p/pt. 513.00 312930.00
516
Wiring for light /power plug with 2x4 sq.mm FR pvc
insulated copper conductor single core cable in
surface/recessed medium class pvc conduit along with 1
nos. 4 sq.mm FR pvc insluated copper conductor single
core cable for loop earthing as reqd. 700 per mtr 200.00 140000.00
517 Supplying and fixing suitable size G.I. Box with modular
providing and fixing 3 pin 5/6 amps. modular socket outlet
and 5/6 amps. modular switch, connections etc. As
required. 208 each 362.00 75296.00
518
Supplying and fixing suitable size GI box with modular
providing and fixing 6 pin 5/6 & 15/16 amps modular
socket outlet and 15/16 amps modular switch, connection
etc. As reqd. 44 each 413.00 18172.00
519 Wiring for circuit/submain wiring along with earth wire with
the following size of FR PVC insulated copper conducter
SC cable in surface / recessed medium class PVC
conduit as required.
a> 2 X 1.5 sq mm+1X 1.5 sq mm earth wire 3120 per mtr 130.00 405600.00
c> 2 X 2.5 sq mm+1X 2.5 sq mm earth wire 200 per mtr 161.00 32200.00
d> 2 X 6 sqmm + 1 X 6 sqmm earthwire (for DBs) 15 per mtr 271.00 4065.00
e> 4 X 6 sqmm + 1 X 6 sqmm earthwire (for sub-panel) 340 per mtr 410.00 139400.00
f> 4 X 25 sqmm + 1 X 16 sqmm earthwire (for sub-panel) 30 per mtr 1232.00 36960.00
520 Supplying and fixing 2 pin, 6 amps ceiling rose on the
existing junction box / wooden block including connection
etc as required. 395 each 42.00 16590.00
connection etc as required. 223 each 46.00 10258.00
522 Supplying and fixing Electronic step fan regulator, piano
type 138 each 204.00 28152.00
Page 61 of 65
S.O.R
CODE NO.
1 2 3 4 5 6 7
523
S/F 20 amps,240V,SPN industrail type socket outlet with

2 poles and earth metal enclosed plug-top alongwith
20amps "C" series,SP,MCB,In sheet steel enclosure on
surface / recessed with chained metal cover for the
socket outlet and complete with connections testing and
commissioning etc as required. 2 each 996.00 1992.00
524 S/F electronic musical call bell suitable for single phase
230 volts complete bell as required. 1 each 219.00 219.00
525
S/F single wall mounted 18/22 watt LED type batten fitting
complete with electronic driver and LED tube etc. Directly
on wall / ceiling including connection with 1.5 sq.mm FR
pvc insulated copper conductor and earthing the body etc
as reqd. 104 each 684.00 71136.00
526
Supplying and fixing following way, horizontal type three

pole & neutral, sheet steel, MCB distribution board, 415
volts, on surface/recess, complete with tinned copper
busbar, neutral busbar, earth bar, din bar,
interconnections, powder painted including earthing etc.
as required .(but without MCB/RCCB/Isolator)
a> 4 way (4+12) double door, horizontal type 20 each 2388.00 47760.00
527
S/F following way single pole & neutral, sheet-steel, MCB
DB - 240 V on surface / recessed, complete with tinned
copper busbar, neutral busbar, earthbar,
dinbar,interconnections, powder-painted including
earthing etc as required.(But without MCB/RCCB/Isolator)
a> 2+4 way, double door 2 each 1004.00 2008.00
2.10.5
a> 8 way (8+24) doubel door Vertical type 4 each 7686.00 30744.00
529 S/F following rating, 240/415 volts, 'C' curve circuit
breaket suitable for including loads of following poles in
the existing MCB DB complete with connections, testing
and commossioning etc. as reqd.
a>6/32 amps, single pole 128 each 192.00 24576.00
530
S/F following rating, 240/415 volts, 'C' curve circuit
40 amps, single pole and neutral 2 each 729.00 1458.00
50/63 amps, Tripole pole and neutral 20 each 1635.00 32700.00
Page 62 of 65
S.O.R
CODE NO.
1 2 3 4 5 6 7
531
Providing and fixing following rating and breaking
capacity MCCB in existing cubicle panel board including
drilling holes in cubicle panel, making connections etc. As
reqd.
a> 315 amp , 35 KA 1 each 17957.00 17957.00
b> 25/100 amp , 16 KA 9 each 3254.00 29286.00
532
S/F following rating, 240/415 volts, 'C' curve circuit
40 amps, doube pole and neutral 2 each 511.00 1022.00
50/63 amps, Tripole pole and neutral 24 each 1635.00 39240.00
533 Providing and fixing following capacity 4 pole
On-load/panel mounted changeover switches in existing
cubicle board, making connection, earthing the body etc.
as required.
400 amps, 4 pole 1 each 21116.00 21116.00
534
Supplying and fixing wall/floor mounted cubical panel
board, fabricated with 16 gauge iron sheet, suitable for
panel mounted switch disconnector, including busbar
chamber, insulator and painting etc. As reqd. (But without
busbar copper strip) (for main panel 4'x4'=16 sq.ft.) (Sub
panel 3'x2' = 6 sq.ft. Such type of 4 No. Sub-Panel = 24 x
sq.ft.) 20 p/sq.f 1382.00 27640.00
535 S/F copper strip 50 mm x 5 mm sizes for bus-bar
including interconnection etc. as reqd. 22 p/kg. 776.00 17072.00
536 Providing and fixing following capacity double pole/
TP&N sheet metal switch disconnector fuse unit in the
existing metal panel board with rewireable type fuses
including drilling holes in metal panel, making
connections etc. as required.
a> 100 Amp, TP&N 3 each 6768.00 20304.00

537
P/F following capacity BUSBAR chaamber with 4 strips of
suitable size made of copper, heavy duty complete with
all accessories including connections,earthing the body
ets as required.
a>100 amps 3 each 3684.00 11052.00
538 Supplying and fixing following size/modules, GI box along
with modular base and cover plate for modular switched
in recess etc.as required.
a> 1 or 2 module (75mm x 75mm) 138 each 180.00 24840.00
539 Supplying and fixing of following types lamp in the
existing electrical fitting/ fixtures etc. as required.
15 watt LED lamp 223 each 302.00 67346.00
540 Supply and connection of following size ISI marked FR
PVC insulated single core copper conductor cable etc. as
reqd.
a> 4 x 25 sq.mm 12 each 662.00 7944.00
b> 4 x 16 sq.mm 10 each 425.00 4250.00
541 Supply of XLPE /PVC insulated PVC sheathed (Heavy
duty) armoured electrical cable with aluminium conductor
as rqd.
Page 63 of 65
S.O.R
CODE NO.
1 2 3 4 5 6 7
a> 3.5 core, 120 sq.mm 100 p/mtr 568.00 56800.00
542
Supply & installation of regular/standard model A.C.
Ceiling fan of 1200 mm sweep including wiring the down
rods of standard length (upto 30 cm) with 1.5 sq.mm fr
pvc insulated copper conductor etc. As reqd. 138 each 1618.00 223284.00
543
Supply & installation of 300mm, 230 V AC exaust fan in
the existing opening including making good the damage
connection testing commissioning etc. As reqd. 26 each 1483.00 38558.00
544 Providing and fixing 25 mm x 5 mm G.I. Strip for on
surface or in recess for loop earthing etc. as reqd. 60 each 150.00 9000.00
545
Earthing with copper earth plate 600 mm X 600 mm X 3
mm thick including accessories and providing masonary
enclosure with cover plate having locking arrangement
and watering pipe 2.7 m long etc. with charcoal /coke and
salt as required. 4 per set 12831.00 51324.00
546 Providing and fixing 4.00 mm dia copper wire on surface
or in recess for loop earthing etc. as required. 80 p.mtr 116.00 9280.00
547 Supply and fixing digital voltmetre, three phase in the
existing cubical panel board incuding drilling holes in the
panel board, making connection etc as required. 1 each 1337.00 1337.00
548 Supply and fixing digital Ammeter, three phase in the
panel board, making connection etc as reqd. 1 p/sq.f 1643.00 1643.00
549
Supplying & fixing 90 watt LED type street light with die
cast aluminium housing for ingress protection of IP65 and
complete with all accessories etc. and connection with FR
pvc insulated copper conductor cable and earthing the
body etc. As reqd. 9 each 8437.00 75933.00
550
S/F of 32 mm x1 metre long G.I. pipe ( medium class )

bracket for mounting of fluorescent /HPMV/ HPSV/CFL
street light fitting on pole including bending the pipe to the
reqd. shape 2 nos. 40 mm x 3 mm flat iron clamps with
nuts, bolts and washer painting the flat iron with primer
and finish paint etc. as reqd. 9 each 338.00 3042.00
551
Laying of one number additional pvd insulated and pvc
sheathed /XLPE power cable of 1.1 KV grade of following
size direct in ground including excavation, sand
cushioingi, protective covering and refilling the trench etc.
as reqd.
a> above 35 sq.mm and upto 95 sq.mm 80 p/mtr 151.00 12080.00
552
S/F of 32 mm x 1 metre long G.I. pipe ( medium class )

bracket for mounting of fluorescent /HPMV/ HPSV/CFL
street light fitting on pole including bending the pipe to the
reqd. shape 2 nos. 40 mm x 3 mm flat iron clamps with
nuts, bolts and washer painting the flat iron with primer
and finish paint etc. as reqd. 27 per set 338.00 9126.00
Page 64 of 65
S.O.R
CODE NO.
1 2 3 4 5 6 7
553 Supplying and fixing 4' x 40 watt suspended type LED
luminaire provides soft- light and glare free symmetrical
illumination complete with all accessories etc. including ball
and socket arrangement, 2 No. down rods of 20 mm dia x
1.6mm thick G.I, pipe upto 30 cm length, painting and wiring
the down rods and connection with 1.5 sq. mm FR PVC
insulated copper conductor, single cor cable and earthing etc.as
required.
27 each 4949.00 133623.00
554 Supplying and fixing surface mounted 15 watt LED
downlighter with integrated electronic driver including all
accessories and connection etc as required. 91 each 1380.00 125580.00
Total Rs. 2471895.00
ABSTRACT:-
Total Electric 13,295,564.00
Executive Engineer,
Building Division, Begusarai.
Page 65 of 65

Boqitibakhri

Uploaded by

Copyright:

Available Formats

Boqitibakhri

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Boqitibakhri

Uploaded by

Copyright:

Available Formats

BILL OF QUANTITY

BUILDING DIVISION BEGUSARAI.

Filling available excavated earth (excluding rock) in trenches, plinth,

Providing and laying in position cement concrete of specified grade

Providing and laying in position ready mixed or site batched design

Reinforcement for R.C.C. work including straightening, cutting, Kilogram

Extra for providing and placing in position 2 Nos, 6 mm dia , MS bars

Centring and shuttering including strutting,propping etc. and removal

Centring and shuttering including strutting,propping etc. and removal

Centring and shuttering including strutting,propping etc. and removal Square

Centring and shuttering including strutting,propping etc. and removal

Centring and shuttering including strutting,propping etc. and removal

Providing and fixing ISI marked flush door shutters conforming to IS :

Providing and fixing aluminium sliding door bolts, ISI marked,

Providing and fixing aluminium tower bolts, ISI marked, anodised

Providing and fixing aluminium tower bolts, ISI marked, anodised

Providing and fixing aluminium handles, ISI marked, anodised (anodic

Providing and fixing aluminium hanging floor door stopper, ISI

Providing and fixing steel glazed doors, windows and ventilatrs of

Providing and fixing M.S. grills of required pattern in frames of

Steel work welded in built up sections/framed worK including cutting

Providing 40x5 mm flat iron hold fast 40 cm long including fixing to

Providing and fixing pressed steel door confirming IS code 4351

Providing and fixing M.S.fan clamp type I or II of 16 mm dia.M.S. bar

Providing and fixing aluminium work for doors, windows, ventilators

Providing and fixing glazing in aluminium door, window, ventilator

Providing and laying Ceramic glazed floor tiles 300x300 mm

6 mm cement plaster to ceiling of mix : 1:4(1 cement: 4 coarse sand) Square

Distempering with oil bound washa ble distemper of approved brand

Finishing walls with water proofing cement paint of approved brand

Applying priming coat: With ready mixed zinc chromate yellow

Applying priming coat: With ready mixed pink or grey primer of

Painting with synthetic enamel paint of approved brand and

Neat cement punning Square

Providing and laying integral cement based water proofing treatment

Providing and fixing on wall face unplasticised -PVC molded

Providing and fixing 600x450 mm beveled edge mirror of superior

Providing and fixing PTMT liquid soap container 109 mm wide,125

Providing and fixing on wall face unplastidsed-PVC(working pressure

Providing and fixing on wall face unplastidsed-PVC(working pressure

Providing and fixing on wall face unplasticised -PVC molded

Providing and fixing on wall face unplasticised -PVC molded

Providing and fixing on wall face unplasticised -PVC molded

Providing and fixing on wall face unplasticised -PVC molded

Providing and fixing on wall face unplasticised -PVC molded

Providing and fixing on wall face unplasticised -PVC molded

Providing and fixing on wall face unplasticised -PVC molded

Providing and fixing on wall face unplasticised -PVC molded

Providing and fixing on wall face unplasticised -PVC molded

Providing and fixing unplasticised -PVC pipe clip of approved design

Constructing masonry Chamber 60x60x75 cm inside, in brick work in

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,

Providing and fixing C.P. brass stop cock (concealed) of standard

Providing and fixing C.P. brass bib cock of approved quality

Providing and fixing PTMT swivelling shower, 15 mm nominal bore,

Providing and laying in position machine batched, machine mixed and

Supplying, assembling, lowering and fixing in vertical position in bore