1. The document provides specifications for an AC axial compact fan model W2S130-AA03-71 made by ebm-papst Mulfingen GmbH & Co. KG.
2. The fan has a nominal voltage of 230 V, runs at 2800 RPM at 50 Hz, and has a power consumption of 45W and current draw of 0.31A.
3. The document includes detailed technical descriptions, diagrams, performance curves, and measured specification values for the fan.
1. The document provides specifications for an AC axial compact fan model W2S130-AA03-71 made by ebm-papst Mulfingen GmbH & Co. KG.
2. The fan has a nominal voltage of 230 V, runs at 2800 RPM at 50 Hz, and has a power consumption of 45W and current draw of 0.31A.
3. The document includes detailed technical descriptions, diagrams, performance curves, and measured specification values for the fan.
1. The document provides specifications for an AC axial compact fan model W2S130-AA03-71 made by ebm-papst Mulfingen GmbH & Co. KG.
2. The fan has a nominal voltage of 230 V, runs at 2800 RPM at 50 Hz, and has a power consumption of 45W and current draw of 0.31A.
3. The document includes detailed technical descriptions, diagrams, performance curves, and measured specification values for the fan.
1. The document provides specifications for an AC axial compact fan model W2S130-AA03-71 made by ebm-papst Mulfingen GmbH & Co. KG.
2. The fan has a nominal voltage of 230 V, runs at 2800 RPM at 50 Hz, and has a power consumption of 45W and current draw of 0.31A.
3. The document includes detailed technical descriptions, diagrams, performance curves, and measured specification values for the fan.
General partner Elektrobau Mulfingen GmbH · Headquarters Mulfingen
Amtsgericht (court of registration) Stuttgart · HRB 590142
Nominal data
Type W2S130-AA03-71 Motor M2S052-CA
Phase 1~ 1~ Nominal voltage VAC 230 230 Frequency Hz 50 60
Method of obtaining data fa fa
Valid for approval/standard CE CE Speed (rpm) min-1 2800 3250 Power consumption W 45 39 Current draw A 0.31 0.25 Min. ambient temperature °C -25 -25 Max. ambient temperature °C 50 70 ml = Max. load · me = Max. efficiency · fa = Free air · cs = Customer specification · ce = Customer equipment Subject to change
Weight 1.1 kg Size 130 mm Motor size 52 Rotor surface Rotor open, painted black Blade material Sheet steel, painted black Fan housing material Die-cast aluminum Guard grille material Steel, coated with white-aluminum plastic (RAL 9006) Number of blades 7 Airflow direction V Direction of rotation Counterclockwise, viewed toward rotor Degree of protection IP20 Insulation class "B" Moisture (F) / Environmental (H) H0+ protection class Max. permitted ambient temp. + 80 °C for motor (transport/storage) Min. permitted ambient temp. for - 40 °C motor (transport/storage) Installation position Any Condensation drainage holes None Mode S1 Motor bearing Ball bearing Touch current according to IEC < 0.75 mA 60990 (measuring circuit Fig. 4, TN system) Motor protection Thermal overload protector (TOP) internally connected Protection class I (with customer connection of protective earth) Conformity with standards EN 60335-1; CE Approval CSA C22.2 No. 113; CCC; UL 507; VDE
5801 installation category A. For detailed information on the measurement setup, contact ebm-papst. Intake sound level: Sound power level according to ISO 13347 / 40 3 sound pressure level measured at 1 m distance from fan axis. The values given are 0.15
valid under the specified measuring
conditions and may vary due to conditions of installation. For deviations from the standard configuration, the parameters have to be 30 checked on the installed unit. 0.1
20 2 0.05
10
0 40 80 120 160 1 cfm Pfs
qv 50 100 150 200 250 300 m³/h
Measured values U f n Pe I qV pfs qV pfs V Hz min-1 W A m3/h Pa cfm in. wg 1 230 50 2800 45 0.31 340 0 200 0.00 2 230 50 2795 45 0.31 305 20 180 0.08 3 230 50 2780 46 0.31 265 40 155 0.16 4 230 50 2780 46 0.31 200 55 120 0.22 U = Voltage · f = Frequency · n = Speed (rpm) · Pe = Power consumption · I = Current draw · qV = Air flow · pfs = Pressure increase
5801 installation category A. For detailed information on the measurement setup, contact ebm-papst. Intake sound level: Sound power level according to ISO 13347 / sound pressure level measured at 1 m 3 0.2
distance from fan axis. The values given are
valid under the specified measuring conditions and may vary due to conditions of installation. For deviations from the standard configuration, the parameters have to be 40 checked on the installed unit. 0.15
2 0.1
20 0.05
0 40 80 120 160 200
1 cfm Pfs
qv 50 100 150 200 250 300 350 m³/h
Measured values U f n Pe I qV pfs qV pfs V Hz min-1 W A m3/h Pa cfm in. wg 1 230 60 3250 39 0.25 390 0 230 0.00 2 230 60 3200 42 0.25 355 25 210 0.10 3 230 60 3165 43 0.26 305 50 180 0.20 4 230 60 3145 44 0.26 235 70 135 0.28 U = Voltage · f = Frequency · n = Speed (rpm) · Pe = Power consumption · I = Current draw · qV = Air flow · pfs = Pressure increase
