Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 137 views

    Sujan Das WQT

    Uploaded by

    MD Shadikul Huq Shezan
    1) Welder Sujan Das was evaluated for qualification to weld stainless steel pipe with the SMAW process. 2) He welded test coupons with a 3mm thickness in the 6G position and was evaluated using liquid penetrant testing. 3) The test results showed a failure to pass the visual inspection requirements.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd

    Sujan Das WQT

    Uploaded by

    MD Shadikul Huq Shezan
    137 views2 pages
    1) Welder Sujan Das was evaluated for qualification to weld stainless steel pipe with the SMAW process. 2) He welded test coupons with a 3mm thickness in the 6G position and was evaluated using liquid penetrant testing. 3) The test results showed a failure to pass the visual inspection requirements.

    Copyright

    © © All Rights Reserved

    Available Formats

    DOCX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    1) Welder Sujan Das was evaluated for qualification to weld stainless steel pipe with the SMAW process. 2) He welded test coupons with a 3mm thickness in the 6G position and was evaluated using liquid penetrant testing. 3) The test results showed a failure to pass the visual inspection requirements.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    137 views2 pages

    Sujan Das WQT

    Uploaded by

    MD Shadikul Huq Shezan
    1) Welder Sujan Das was evaluated for qualification to weld stainless steel pipe with the SMAW process. 2) He welded test coupons with a 3mm thickness in the 6G position and was evaluated using liquid penetrant testing. 3) The test results showed a failure to pass the visual inspection requirements.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    You are on page 1of 2

    BANGLADESH BUREAU OF INSPECTION & SERVICES WPQR –PRE

    QUALIFY
    WELDER OPERATOR QUALIFICATION TEST SHEET: 1 of 1
    EMISION 2022
    :
    REVIEW: 1

    WELDER QUALIFICATION REGISTER (WPQ)


    Welder Name: Sujan Das Identification Number: Inspection Date:29-03-2022
    CertificateNo:BBIS-WQT-00064
    Specification of base metal: STS-304
    Evaluated by: ✔Test Coupon ☐ Production Weld
    Thickness: 03 mm
    Diameter: 100 mm
    Welding Variables Actual Values Range Qualified
    Welding process SMAW SMAW
    Type used (manual, semi-auto) Manual Manual
    Backing (metal, weld metal,double welded, etc.) No No
    Pipe (enter diameter if pipe or tube) 100A x SCH.10 Unlimited
    Base metal P-or-S to P-or-S Number P1 to P1 P1 to P1
    Filler Metal or electrode specification(s) (SFA)
    5.4 5.4
    (info only)
    Filler Metal or electrode classification(s) E308-16 E308-16
    Filler metal F- Number F-No.5 F-No.5
    Consumable insert (GTAW ) N/A N/A
    Filler type (solid/metal or flux cored/powder)
    N/A N/A
    (GTAW )
    Deposit thickness for each process 3 mm Max 24mm
    Position qualified 6G ALL
    Vertical progression (uphill or downhill) Uphill Uphill
    Type of fuel gas (OFW) N/A N/A
    Inert gas backing (GTAW, PAW, GMAW) N/A N/A
    Transfer mode (spray/globular or pulse to short
    N/A N/A
    circuit - GMAW)
    SMAW current type / polarity (AC, DCEP, DCEN) DC / AC DC / AC
    RESULTS
    Visual Inspection: Unsatisfied
    Test Result: Pass Fail- ✔
    Test Method: PT (Liquid Penetrants)
    Evaluated By: Inspection company
    Company Name: Bangladesh Bureau Of Inspection & Services

    We certfy that the statements in the record are correct and that the test coupons were prepared, welded and tested in
    accordance with the requirements of section IX of the ASME Boiler and pressure Vessel Code
    Interpreted By BBIS Verified by Contactor Approved by Consultant
    Name:Mohammad Nur-Alam Siddik TaeYoung Approved by
    Designation:QA/QC Engineer DongMyeong
    Signature:

    Date: 29-03-2022

    You might also like