GS-0810 Requirements
GS-0810 Requirements
GS-0810 Requirements
Basic Requirements:
A. Degree: Engineering. To be acceptable, the program must: (1) lead to a bachelor’s
degree in a school of engineering with at least one program accredited by ABET; or (2)
include differential and integral calculus and courses (more advanced than first-year
physics and chemistry) in five of the following seven areas of engineering science or
physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c)
fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f)
nature and properties of materials (relating particle and aggregate structure to properties);
and (g) any other comparable area of fundamental engineering science or physics, such as
optics, heat transfer, soil mechanics, or electronics.
OR
1
For more information about EI and EIT registration requirements, please visit the National Society of Professional
Engineers website at: http://www.nspe.org.
2
The FE examination is not administered by the U. S. Office of Personnel Management. For more information,
please visit: http://www.nspe.org/Licensure/HowtoGetLicensed/index.html.
1
registration by an engineering licensure board in the various States, the District of
Columbia, Guam, and Puerto Rico.
3. Specified academic courses -- Successful completion of at least 60 semester hours of
courses in the physical, mathematical, and engineering sciences and that included the
courses specified in the basic requirements under paragraph A. The courses must be
fully acceptable toward meeting the requirements of an engineering program as
described in paragraph A.
4. Related curriculum -- Successful completion of a curriculum leading to a bachelor's
degree in an appropriate scientific field, e.g., engineering technology, physics,
chemistry, architecture, computer science, mathematics, hydrology, or geology, may
be accepted in lieu of a bachelor’s degree in engineering, provided the applicant has
had at least 1 year of professional engineering experience acquired under professional
engineering supervision and guidance. Ordinarily there should be either an
established plan of intensive training to develop professional engineering
competence, or several years of prior professional engineering-type experience, e.g.,
in interdisciplinary positions. (The above examples of related curricula are not all-
inclusive.)
Note: An applicant who meets the basic requirements as specified in A or B above, except as
noted under B.1., may qualify for positions in any branch of engineering unless selective factors
indicate otherwise.
2
that characterizes a full 4-year engineering program leading to a bachelor's degree, or the
equivalent.
Professional ability to apply engineering knowledge is defined as the ability to (a) apply
fundamental and diversified professional engineering concepts, theories, and practices to achieve
engineering objectives with versatility, judgment, and perception; (b) adapt and apply methods
and techniques of related scientific disciplines; and (c) organize, analyze, interpret, and evaluate
scientific data in the solution of engineering problems.
Types of Creditable Experience: Professional work in engineering, like that in other professions,
is marked by continuing personal effort to keep abreast of the advancing and changing discipline.
Continuing education in engineering and related fields is an important element of full
professional competence as an engineer that should be considered in evaluating the qualifications
of applicants for professional engineering positions.
In some situations, experience may be creditable even if it is not clearly professional engineering
work. In such cases, the experience must have been preceded by prior responsible professional
engineering experience and must contribute directly and significantly to the applicant's
engineering competence. For example, an engineer might be assigned to a management-type
position in preparation for assumption of higher-level responsibilities in engineering project or
program management.
Graduate Education:
1. Regardless of the field of undergraduate study, completion of the requirements for a
master's or higher degree in engineering is fully qualifying for the grade indicated,
provided the applicant's total background, i.e., education and any experience,
demonstrates evidence of knowledge, skills, and abilities that are substantially equivalent
to those acquired through the successful completion of the courses specified in paragraph
A.
2. With a bachelor's degree in engineering, graduate education in a related field is
acceptable in lieu of graduate study in engineering for appropriate types of positions. For
example, a Bachelor of Science in engineering plus a master's degree in business
administration would be qualifying for Industrial Engineer, GS-9, but not for GS-9
laboratory positions in research and development. The key consideration in determining
if such graduate education should be credited is whether or not the education provided the
knowledge, skills, and abilities necessary to perform the work of the position being filled.
Special Competence in Particular Areas of Engineering: Many engineering positions demand
specific competence in a particular function or area. For such positions, agencies may use
selective factors to identify those applicants whose records show evidence of the required
capabilities. This may include limiting consideration to fields of study that provides the specific
Knowledge, Skills and Abilities/competencies for a particular position when considering the
qualifications of individuals applying on the basis of education. Such selective factors can be
used for positions at all grade levels covered by this standard. Please note selective factors must
meet the requirements outlined in the General Schedule Qualification Policies, available at:
http://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-
qualification-policies/.
3
Engineering Registration or Licensure: Registration or licensure as a professional engineer is an
appropriate selective factor for appointment to certain, typically high-level, engineering
positions. The key consideration is that registration or licensure must be essential for acceptable
performance of the work of the position to be filled. Accordingly, it is an appropriate
requirement for positions with duties and responsibilities that satisfy one of the following
criteria:
Responsibility for final approval of designs of major structures and facilities involving
public safety where such compliance with State laws meets an essential need of the
engineering organization to provide objective evidence to agency management and the
public that the work is performed by engineers of proven competence.
Responsibility for engineering determinations concerning contract awards or other major
aspects of design and construction work to be performed by engineers in the private
sector, where registration or licensure is essential to have their full confidence and respect
to achieve cooperation on critical engineering issues.
When an engineering position has duties and responsibilities that would support a requirement
for registration or licensure and a requirement is established, the position description should
clearly document the basis for the requirement. It would be inappropriate to require that
applicants be registered or hold a license for positions with less responsibility than that indicated
above, or for positions that involve responsibilities and functions such as research and
development, or for the sole purpose of improving the "image" of engineers in the Federal
service. For those positions where registration or licensure is an appropriate requirement, such
positions have been characteristically filled by registered or licensed professional engineers. If a
currently filled position is newly identified as requiring a professional engineer, the requirement
for registration or licensure should be waived for the duration of the employee's incumbency.
College Teaching: College-level teaching of engineering may be considered as professional
experience in engineering. In accepting and evaluating teaching experience, all specific
qualification requirements pertaining to the evaluation of professional experience such as grade
level, responsibility, scope, specialization, and knowledge required are also applicable to the
evaluation of teaching experience. Teaching experience that is accompanied by a significant
amount of research, direction of research, investigative, or similar work may be credited at full
value in meeting a specific requirement for research, investigative, or similar experience.
Guide for the Evaluation of Engineering Programs: ABET accredits specific engineering
programs; it does not accredit institutions. Thus, an accredited college may have (1) ABET-
accredited engineering programs; and/or (2) engineering programs that are not ABET-accredited.
Please visit ABET’s website (www.abet.org) for more information on engineering programs that
have received accreditation.
Some engineering programs are acceptable as meeting the basic requirements even though such
programs are not specifically accredited by ABET. As a general rule, any professional
engineering program in an engineering school that has one or more of its programs accredited by
ABET’s Engineering Accreditation Commission may be accepted. It should be noted, however,
that some universities have programs identified as engineering programs outside the engineering
school, e.g., in the school of architecture or forestry. Such programs need to be reviewed to see if
they comply with the requirements of paragraph A.(2) of the basic requirements.
4
Occupations and Series Covered by the 0800 Individual Occupational Requirements