ICT 8 Budget of Work

BULAC NATIONAL HIGH SCHOOL
BULAC, TALAVERA NUEVA ECIJA
BUDGET OF WORK
Subject : Information and Communication Technology (CSS 8 Exploratory)

Grade Level : Grade 8
Quarter : 1st to 4th Quarter
NO. OF
WEEKS
MOST ESSENTIAL LEARNING COMPETENCIES (MELC)
TAUGHT
FIRST QUARTER
LO 1. Plan and prepare for
tasks to be undertaken
1.1 Identify tasks to be undertaken properly
1.2 Identify and select appropriate hand tools according to the task
requirements
LO 2. Prepare hand tools

2.1 Check appropriate hand tools for proper operation and safety
2.2 Identify and mark unsafe or faulty tools for repair according to standard
company procedure
3
LO 3. Use appropriate hand tools and test equipment
3.1 Use tools according to tasks undertaken.
3.2 Observe all safety procedures in using tools at all times and use appropriate
PPE
3.3 Report malfunctions, unplanned or unusual events to the supervisor
LO 4. Maintain hand tools

4.1 Do not drop tools to avoid damage; carry out routine maintenance of tools
according to standard operational procedures, principles, and techniques
4.2 Store tools safely in appropriate locations in accordance with
manufacturer’s specifications or standard operating procedures
LO 1. Plan and prepare for task to be undertaken
1.1 Determine requirements of task in accordance with the required output 5
1.2 Select appropriate hardware and software according to task assigned and
required outcome
1.3 Plan a task to ensure that OSH guidelines and procedures are followed
1.4 Follow client-specific guidelines and procedures
1.5 Apply required data security guidelines in accordance with existing
procedures
LO 2. Input data into computer

2.1 Enter the data into the computer using appropriate program/application in
accordance with company procedures
2.2 Check the accuracy of information and save the information in accordance
with standard operating procedures
2.3 Store inputted data is in storage media according to requirements
2.4 Perform work within ergonomic guidelines
Address: Purok 3, Bulac, Talavera Nueva Ecjia

Logo 300791
Tel. No.: 0998 884 2924/ 0909 020 1760
Email Address: bulacnhs1995@gmail.com SCHOOL ID
0.76in
LO 3. Access information using computer

3.1 Select correct program/application based on job requirements
3.2 Access program/application containing the information required according
to company procedures
3.3 Select, open, and close desktop for navigation purposes
3.4 Carry out keyboard techniques in line with OSH requirements
LO 4. Produce output/ data using computer system

4.1 Process entered data using appropriate software commands
4.2 Print out data as required using computer hardware /peripheral devices in
accordance with standard operating procedures
4.3 Transfer files and data between compatible systems using computer
software, hardware/peripheral devices in accordance with standard operating
procedures
LO 5. Use basic functions of a www- browser to locate information
5.1 Establish information requirements for internet search
LO 6. Maintain computer equipment and systems
6.1 Implement procedures for ensuring security of data, including regular
backups and virus checks in accordance with standard operating
procedures
6.2 Implement basic file maintenance procedures in line with the standards
operating procedures
SECOND QUARTER
LO 1. Select measuring instruments
1.1 Identify object/s or component to be measured
1.2 Obtain correct specifications from relevant source
1.3 Select measuring tools in line with job requirements
LO 2. Carry out measurements and calculation

2.1 Select appropriate measuring instrument to achieve required outcome
2.2 Obtain accurate measurements for job
2.3 Perform calculation needed to complete task using the four mathematical
fundamental operations addition (+), subtraction (-), multiplication (x), and
division (÷) 4
2.4 Use calculation involving fractions, percentages and mixed numbers to
complete workplace tasks
2.5 Self-check and correct numerical computation for accuracy
2.6 Read instruments to the limit of accuracy of the tool
LO 3. Maintain measuring instruments

3.1 Ensure proper handling of measuring instruments to avoid damage and
clean it before and after using
3.2 Identify tasks to be undertaken for proper storage of instruments according
to manufacturer’s specifications and standard operating procedures

Logo 300791
Tel. No.: 0998 884 2924/ 0909 020 1760
0.76in
LO 1. Identify different kinds of technical drawings

1.1 Select correct technical drawing in accordance with the job requirement
1.2 Segregate technical drawings in accordance with the types and kinds of
drawings
LO 2. Interpret technical drawing

2.1 Recognize components, assemblies, or objects as required
2.2 Identify dimensions of the key features of the objects depicted in the
drawing
2.3 Identify and interpret symbols used in the drawing
2.4 Check and validate drawing against job requirements or equipment in
accordance with standard operating procedures
4
LO 3. Prepare/ make changes to electrical/ electronic schematics and
drawings
3.1 Draw and identify correctly electrical/ electronic schematic
3.2 Identify correct drawing; select and use equipment in accordance with job
requirements
LO 4. Store technical drawings and equipment/ instruments
4.1 Identify tasks to be undertaken for care and maintenance of drawings
according to company procedures
4.2 Record technical drawings and prepare an inventory in accordance with
company procedures
4.3 identify tasks to be undertaken for proper storage of instruments according
to company procedures
THIRD QUARTER
LO 1. Plan and prepare for termination/ connection of electrical wiring/ 8
electronics circuits
1.1 Check materials according to specifications and tasks
1.2 Select appropriate tools and equipment according to task requirements
1.3 Follow planned task to ensure OHS guidelines and procedure
1.4 Prepare electrical wiring/electronics circuits correctly for
connecting/terminating in accordance with instruction and work site procedures
LO 2: Terminate/connect electrical wiring/ electronic circuits

2.1 Observe safety procedures in using tools and use appropriate personal
protective equipment at all times
2.2 Identify the tasks to be undertaken to work safely in accordance with the
workplace and standard procedures
2.3 Use appropriate range of methods in
termination/connection in accordance to specifications, manufacturer’s
requirements, and safety
2.4 Follow correct sequence of operation
2.5 Adjust used accessories
2.6 Confirm termination/connection in accordance with job specification
LO 3: Test termination/connections of electrical wiring/electronics circuits

3.1 Conduct complete testing of termination/connection of electrical
wiring/electronics circuits in compliance with specifications and regulations
using appropriate procedures and equipment
3.2 Check wirings and circuits using specified testing procedures
Logo 300791
Tel. No.: 0998 884 2924/ 0909 020 1760
0.76in
3.3 Respond to unplanned events or conditions in accordance with established

procedures
FOURTH QUARTER
LO 1: Determine criteria for testing electronics components
1.1 Obtain and clarify work instructions based on job order or client
requirements
1.2 Consult responsible person for effective and proper work coordination
1.3 Obtain and interpret data sheets/application notes based on manufacturer’s
specifications
1.4 Define testing criteria to ensure that components meet technical and quality
requirements
1.5 Document and communicate
testing criteria to relevant personnel
LO 2: Plan an approach for components testing

2.1 Identify various testing methods based on types of electronic components
2.2 Determine characteristics and appropriateness of testing methods to be
used during development and on completion
2.3 Consider/select testing methods in relation to appropriate testing strategy
2.4 Develop plan for testing components at specified points during development
and on completion
2.5 Prepare and check required test and measuring instruments and tools in
accordance with established procedures
8
2.6 Establish records system to document testing results, including problems
and
faults
LO 3: Test components
3.1 Apply appropriate testing methods to electronic components in accordance
to technical specifications
3.2 Detect and record problems and faults by testing
3.3 Document remedial steps
3.4 Resolve detected problems and faults during testing in accordance with
agreed project or industry practice
3.5 Evaluate final products against the determined criteria
3.6 Submit to relevant personnel the documented and summarized evaluation
report of the testing process
LO 4: Evaluate the testing process
4.1 Identify testing methods that were successful based on industry standards
4.2 Evaluate testing process and records system based on standard procedures
4.3 Document test results/findings for subsequent testing
Prepared by
EDELMAR G. BENOSA
Logo 300791
Tel. No.: 0998 884 2924/ 0909 020 1760
0.76in
Teacher II
Checked by:
MARIA FE P. FIDER
Head Teacher III
Noted:
GERARDO P. VICENCIO
School Principal II

Logo 300791
Tel. No.: 0998 884 2924/ 0909 020 1760
0.76in

ICT 8 Budget of Work

Uploaded by

Copyright:

Available Formats

ICT 8 Budget of Work

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

ICT 8 Budget of Work

Uploaded by

Copyright:

Available Formats

BULAC NATIONAL HIGH SCHOOL

BULAC, TALAVERA NUEVA ECIJA

Subject : Information and Communication Technology (CSS 8 Exploratory)

LO 2. Prepare hand tools

LO 4. Maintain hand tools

LO 2. Input data into computer

Address: Purok 3, Bulac, Talavera Nueva Ecjia

LO 3. Access information using computer

LO 4. Produce output/ data using computer system

LO 2. Carry out measurements and calculation

LO 3. Maintain measuring instruments

Address: Purok 3, Bulac, Talavera Nueva Ecjia

LO 1. Identify different kinds of technical drawings

LO 2. Interpret technical drawing

LO 2: Terminate/connect electrical wiring/ electronic circuits

LO 3: Test termination/connections of electrical wiring/electronics circuits

3.3 Respond to unplanned events or conditions in accordance with established

LO 2: Plan an approach for components testing

Address: Purok 3, Bulac, Talavera Nueva Ecjia

You might also like