NIKO-SEM UNIVERSAL N5100V

SWITCHING BUFFER N5100P

GENERAL DESCRIPTION FEATURES

The N5100 is a universal switching buffer, ▲ 4.5V~13.2V operating voltage
specifically designed to drive the power ▲ ZVS control
MOSFET for the various switching topology ▲ Level shift for different output potential
applications, it allows to receive dual input ▲ Full bridge operating with a push- pull
signals from a push-pull controller, and outputs controller
total 4 driving outputs for directly driving dual ▲ 4 high current totem pole outputs
N-channel and dual P-channel MOSFETs. ▲ High efficiency
The N5100 features a level shift function that ▲ Compatible with W98M4427 (dual
can shift the output potential to be different with outputs application)
the input potential while the device connects to ▲ Low cost solution
different voltage source. ▲ SOP-8 and DIP-8 Package
The N5100 features a fixed delay time control
function that can transfer dual input signals APPLICATIONS
from the push-pull controller become to 4
driving outputs, and successful to drive a full ▲ Full bridge topology
bridge structure power supply. ▲ Half bridge topology
The N5100 provides 4 high current totem pole ▲ Push-pull topology
outputs that allow to be used on the multiple
switching control application with single
universal switching buffer.
BLOCK DIAGRAM

VCC PIN6

PIN8 POUTA
driv er A
DELAY

INA PIN2

PIN7 NOUTB
driv er B
DELAY

GND PIN3

PIN1 POUTC
driv er C
DELAY

INB PIN4

PIN5 NOUTD
driv er D
DELAY

1
REV:1 FEB-08-2007
 NIKO-SEM UNIVERSAL N5100V
SWITCHING BUFFER N5100P

ABSOLUTE MAXIMUM RATINGS

PARAMETER SYMBOL LIMITS UNITS
Power Supply Voltage Vcc 16 V
Input Voltage INA,INB -5.0 ~VCC+0.3 V
Power Dissipation at Ta =50℃ , SOP/DIP PTOT 725 mW
Operating Junction Temperature Tj - 40 ~ 150 ℃
Storage Temperature TSTG - 65 ~ 150 ℃
Lead Temperature (Soldering) 10S TLEAD 300 ℃

THERMAL DATA
PARAMETER SYMBOL SOP- 8 DIP-8 UNIT
Thermal Resistance Junction to Ambient θja 53 45 ℃/W
Thermal Resistance Junction to Case θjc 23 15 ℃/W

ELECTRICAL SPECIFICATIONS ( - 40℃≦TC≦85℃, unless otherwise specified )

PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNITS

INPUT SECTION
Logic 1 input voltage VIH 2.4 V
Logic 0 input voltage VIL 0.5 V
Input Current IIN 0≦VIN≦VCC -1 1 uA
OUTPUT SECTION
High Output Voltage VOH Vcc-0.075 V
Low Output Voltage VOL 0.05 V
Output Resistance RP current source 10 Ω
Output Resistance RN current sink 4 Ω
Rise Time Tr VCC=12V,Co=1000pF 35 nS
Fall Time Tf VCC=12V,Co=1000pF 20 nS
Propagation Delay to Turn
Tp No load 12 25 nS
On
Delay Time Control Tdelay No load 250 350 450 nS
POWER SUPPLY SECTION
Supply Voltage VCC 4.5 13.2 V
Supply Current Icc No load 2.7 4 mA

2
REV:1 FEB-08-2007
 NIKO-SEM UNIVERSAL N5100V
SWITCHING BUFFER N5100P

OPERATING WAVEFORM

INA

INB

DELAY

POUTA OFF ON OFF ON OFF

DELAY

NOUTB ON OFF ON OFF ON

DELAY

POUTC ON OFF ON OFF ON

DELAY

NOUTD OFF ON OFF ON OFF

D2 D1 D4 D3 D2 D1 D4 D3 D2 D1

DIODE ON

B&C A&D B&C A&D B&C

ON ON ON ON ON

3
REV:1 FEB-08-2007
 NIKO-SEM UNIVERSAL N5100V
SWITCHING BUFFER N5100P

TYPICAL CHARACTERISTICS

DelayTime vs. Supply Rise and Fall Time vs.

Voltage Supply Voltage
450 80
400 70
350 60

Time (ns)
300 50
Time (ns)

250 40
200 30
150
20
100
50 10
0 0
0 5 10 15 0 5 10 15
Supply Voltage (V) Supply Voltage (V)

Supply Current vs. Capacitive Load Supply Current vs. Frequency

160
140 30
SIPPLY CURRENT (mA

SUPPLY CURRENT (mA)

120
100 20
80
60
10
40
20
0
0
1 10 100 1000
10 100 1000 10000
FREQUENCY (kHz)
CAPACITIVE LOAD (pF)

Rise and Fall Time vs. Capacitive Load Delay Time vs. Temperature
1000
600
500
Time (ns)

100 400
Time (ns)

300
200
10 100
0
25

75
5

1
12
-7

-2

10 100 1000 10000

TEMPERATURE (C)
CAPACITIVE LOAD (pF)

4
REV:1 FEB-08-2007
 NIKO-SEM UNIVERSAL N5100V
SWITCHING BUFFER N5100P

Rise and Fall Time vs. Low Output vs. Current

Temperature

OUTPUT VOLTAGE (V)

0.8
70
60 0.6
Time (ns)

50
40 0.4
30
20 0.2
10
0 0.0
5
5

25

75

20

40

60

80
0

0
12
-7

-2

10
TEMPERATURE (C) CURRENT SINK (mA)

High Output vs. Current

2
IVs-Vout (V)

1.5
1
0.5
0
20

40

60

80
0

0
10

CURRENT SOURCE (mA)

5
REV:1 FEB-08-2007
 NIKO-SEM UNIVERSAL N5100V
SWITCHING BUFFER N5100P

PIN CONFIGURATIONS

TOP VIEW

POUTC 1 8 POUTA

INA 2 7 NOUTB

GND 3 6 VCC

INB 4 5 NOUTD

SOP-8 / DIP-8

PIN FUNCTIONS
NO FUNCTION DESCRIPTION

1 POUTC The output of driver C that is driving the external P-channel MOSFET
2 INA Control input A; TTL/CMOS compatible input
3 GND GND
4 INB Control input B; TTL/CMOS compatible input
5 NOUTD The output of driver D that is driving the external N-channel MOSFET
6 VCC Supply voltage input
7 NOUTB The output of driver B that is driving the external N-channel MOSFET
8 POUTA The output of driver A that is driving the external P-channel MOSFET

DEVICE SELECTION GUIDE

DIP-8 SOP-8
N5100P N5100V

6
REV:1 FEB-08-2007
 NIKO-SEM UNIVERSAL N5100V
SWITCHING BUFFER N5100P

SOP-8 (D) MECHANICAL DATA

mm mm
Dimension Dimension
Min. Typ. Max. Min. Typ. Max.
A 4.8 5.0 H 0.4 1.27
B 3.8 4.0 I 0.18 0.25
C 5.8 6.2 J 0.22
D 0.33 0.51 K 0° 8°
E 1.27 L
F 1.75 M
G 0.1 0.3 N

7
REV:1 FEB-08-2007
 NIKO-SEM UNIVERSAL N5100V
SWITCHING BUFFER N5100P

DIP-8 MECHANICAL DATA

mm mm
Dimension Dimension
Min. Typ. Max. Min. Typ. Max.
A 8.8 9.6 H 7.95 9.75
B 6.2 7.0 I
C 0.35 0.45 0.55 J
D 2.54 K
E 0.5 0.8 L
F 3.05 3.28 3.56 M
G 7.48 7.62 8.13 N

8
REV:1 FEB-08-2007