SC100

SATELLITE CONTROLLER

MODEL 3187

SERVICE
&
PARTS
MANUAL

OCT 2002 4212875 C

 TABLE OF CONTENTS

SERVICE MANUAL ............ 1 PARTS MANUAL ..............23

Specifications .......................................2 Order Information...............................24
Electrical.............................................2 Minimum Order.................................24
Weight ................................................2 Payment............................................24
Dimensions.........................................2 To Order By Mail...............................24
Factory Options ..................................2 To Order by FAX..............................24
Introduction ..........................................2 To Order by Phone...........................25
Component Identification....................3 To Order On The Web......................25
Unpacking.............................................4 Returns.............................................25
Pre-Installation Requirements .............4 Limitation of Liability .........................25
Grounding (Earthing) & Electrical .......5 Questions .........................................25
Assembly & Installation .......................6 Final Assembly...................................26
Controller ............................................14 Cabinet Parts ......................................27
Programming ......................................14 Small Parts Package ........................28
Default Configuration........................15 Service Package ..............................28
For FF-2000 Food (32°F to 41°F) Controller Panel Assembly ...............29
Settings Only ....................................16 Door Parts ...........................................30
Set Price...........................................17 Coin Insert Assembly........................32
Test Vend.........................................17 Coin Mech - Options.........................33
Display Working Motors....................18 Validator - Card Reader - Options ....33
Accounting .......................................18
POP Display Window .........................19
Door Lock & Keys ..............................19
Schematic ...........................................20

Please find the identification plate located on the backside of the cabinet, and
record the model and serial numbers on the space below.

MODEL NUMBER:
SERIAL NUMBER:

The model and serial numbers will aid us in providing you with correct and efficient
service or parts information for your machine should that need arise.

SC100 l 3187 l 4212875

ii
 SERVICE
MANUAL

SC100 l 3187 l 4212875

1
SPECIFICATIONS
Model 3187 For Indoor Use Only

ELECTRICAL WEIGHT
• 115V, 1.2 Amps, 60 Hz • 175 Pounds [79.4 kg]
• (220V Option)

DIMENSIONS FACTORY OPTIONS

• Cabinet Width: 11-1/8” [28.3 cm] • POP Option
• Door Width: 12” [30.5 cm] • Language Option
• Depth: 33-3/8” [84.8 cm] • Coin Mech Option
• Height: 72” [183 cm] • Validator Option

INTRODUCTION
This manual contains instructions, service and installation guidelines for the SC100
Satellite Controller.
All programming of vend functions, pricing and features are done at the controller.
Changes can be made without any additional accessories or remote parts.
Selections can be priced individually from $.05 to $99.95 in five cent increments
(U.S. currency). When adapted to accept international or foreign, the maximum
vend price will be 255 times the smallest denomination of coin being accepted.
Cash accountability records Total
Cash transactions and Total Vend If you have any questions pertaining to the
cycles performed by the vendor. information in the manual, replacement parts or
Information for individual selections, the operation of the vendor, then you should
complete rows or total machine can contact your local distributor or:
be compiled and used for inventory VendNet™
and ordering records. 165 North 10 th Street
Waukee, Iowa 50263
Electrical malfunctions are recorded
United States of America
and displayed when the machine is
placed in Service Mode. Non-
Phone: (515) 274-3641
functional motors or selections will
Parts Fax: (515) 987-4447
continue to operate if other motors
Sales Fax: (515) 274-0390
become non-functional.
Email: vendnet@vendnetusa.com
Each SC100 Satellite Controller has Website: http://www.vendnetusa.com
the capability of supporting a
“satellite” vending machine, such as
a Can Vendor, Food Merchandiser
(Menu Mart II), or Cold/Frozen Satellite Food Vendor. The satellite vendor utilizes
the SC100 Satellite Controller’s existing controller, coin mechanism, bill validator

SC100 l 3187 l 4212875

2
and keypad to perform the vend functions. For details on the satellite vendor, refer
to the service manual pertaining to the specific vendor.
This manual should be read thoroughly in order to become familiar with the
functions and features of the SC100. The initial set-up of a vending machine is a
very important step of insuring that the equipment operates in a trouble-free
manner. Following the instructions at the initial installation of the machine will avoid
service problems and minimize set-up time.

COMPONENT IDENTIFICATION

SC100 l 3187 l 4212875

3
UNPACKING
This machine was thoroughly inspected before leaving the factory and the
delivering carrier has accepted this vendor as their responsibility. Note any
damage or irregularities at the time of delivery and report them to the carrier.
Request a written inspection report from the claims inspector to file any claim for
damage. File the claim with the carrier (not the manufacturer) within 15 days after
receipt of the machine.
Carefully remove the outside packing material so as not to damage the finish or
exterior of the machine. Inspect the machine for concealed shipping damage.
Report any damage hidden by shipping material directly to the delivering carrier on
a hidden damage report.
Record the model number
and serial number of the
vendor for your records.
These numbers can be
found on the Serial Plate
on the rear of the cabinet
and/or inside the SC100.
Refer to these numbers on
all correspondence and
inquiries pertaining to
SC100.
Cut the plastic banding
around the SC100.
Remove the screws from
the front board of the
shipping skid. Slide the
SC100 forward to remove
from the skid.

PRE-INSTALLATION REQUIREMENTS
The SC100 and the Satellite Food Vendor in its place of operation should be no
further than nine feet (9 ft.) from the power outlet or receptacle. The doors must
open fully without interference. Most satellite units must have at least six inches
(6” in.) of space between the back of the vendor and any wall or obstruction for
proper air circulation. All leg levelers must touch the floor. The vendor must be level
for proper operation and acceptance of coins through the coin mechanism.
Retrieve the keys to the SC100 from the coin return cup. Open the outer door and
remove all internal packing material.
Consult local, state and federal codes and regulations before installation of the
vendor.

SC100 l 3187 l 4212875

4
GROUNDING (EARTHING) & ELECTRICAL
Before connecting the vendor, the integrity of the main electrical supply must be
checked for correct polarity, presence of ground (earth) and correct voltage. These
checks should be repeated at six (6) month intervals with the routine safety
electrical testing of the vendor itself.
To verify that the receptacle is properly grounded and polarized, insert one probe of
a Multi-Meter (set to check AC line voltage) or a test light in the ground terminal
(hole) and the other probe into the hot terminal of the outlet.
If the receptacle is not properly
grounded or polarized, you should
contact a licensed electrician to
correctly polarize and/or ground the
receptacle to ensure safe operation.
A noise suppressor (line filter) has been
installed in this machine to compensate
for any mains signal noise that could
interfere with the normal operation of
the controller.
Figure 1. 230 Volt Outlets
For proper operation of any equipment utilizing electronically controlled
components, the equipment should be placed on an isolated or dedicated noise-
free circuit, properly polarized and grounded.
Refer to Specifications on page 2 to
determine circuit amperage and
protection.
Shown in Figure 2 are two properly
grounded and polarized wall outlets.
Figure 1 shows two 230-volt wall outlets.
Figure 1 shows a 115-volt, two-wire
outlet with a three-plug adapter in place.

Figure 2. 115 Volt Outlets

SC100 l 3187 l 4212875

5
ASSEMBLY & INSTALLATION

SAFETY & WARNING

Always disconnect power before servicing.

1 TOOLS NEEDED

• Phillips Screw Driver

2 DO NOT CONNECT POWER TO THE SC100.

DO NOT CONNECT POWER TO THE SATELLITE FOOD VENDOR.

3 REMOVE NEW DOOR TRIM & SAFETY BRACKET FROM INSIDE THE
SC100 IDENTIFY CONTENTS OF SMALL PARTS PACKAGE.

SC100 l 3187 l 4212875

6
4 REMOVE ANTI-CHEAT PANEL FROM FOOD VENDOR
(ANTI-CHEAT PANEL WILL BE RE-USED ON STEP 14).

5 REMOVE DOOR TRIM FROM VOOD VENDOR

(DOOR TRIM IS NO LONGER NEEDED.

SC100 l 3187 l 4212875

7
6 INSTALL NEW DOOR TRIM ON FOOD VENDOR DOOR
(NEW DOOR TRIM SHIPPED INSIDE SC100).

7 POSITION SC100 TO FOOD VENDOR. INSTALL SAFETY BRACKET.

SC100 l 3187 l 4212875

8
8 ADJUST SC100 FRONT & REAR LEG LEVELERS.

9 ATTACH BOTH TOP & BOTTOM BRACKETS

(LOCATED AT REAR OF SC100).

SC100 l 3187 l 4212875

9
10 SECURE SC100 TO FOOD VENDOR.

11 REMOVE COVER.
12 CONNECT UMBILICAL HARNESS & POWER
CORD TO SC100.

SC100 l 3187 l 4212875

10
13 CONNECT UMBILICAL HARNESS TO FOOD VENDOR & INSTALL
CLAMP. RE-INSTALL SC100 COVER.

SC100 l 3187 l 4212875

11
14 INSTALL ANTI-CHEAT PANEL TO LEFT SIDE OF SC100.

15 CLOSE DOORS. 16 INSTALL CLAMP AND COVER.

SC100 l 3187 l 4212875

12
17 CONNECT POWER TO SC100 & FOOD VENDOR.
TURN ON POWER TO BOTH.

18 PROGRAMMING.
Continue with price setting and other controller programming instructions on page
14. Refer to Food Vendor service manual for product loading instructions.

Important!

The SC100 is factory programmed for a FF2000 Frozen

Satellite Food Vendor Model 3182.
If the Frozen Satellite Food Vendor is to be used for vending of
cold food [32°F to 41°F] or slackening frozen food [soft freeze]
(15° an below) OR if connecting to a different satellite vendor,
then the SC100 must be reprogrammed. Follow DEFAULT
CONFIGURATION programming instructions on page 14. Refer to
Satellite Food Vendor service manual for product loading
information.

SC100 l 3187 l 4212875

13
CONTROLLER
The Controller is located behind the controller cover. The Service Mode button is
located on the right side of the controller and can be accessed through a hole in the
cover.

Figure 3. Service Mode Button

PROGRAMMING
Also refer to attached installation instructions 4212876 for programming
instructions. For additional controller Instructions refer to Service Manual
Addendum 4212619.

IMPORTANT
The SC100 is factory programmed (configured) for a FF2000
Frozen Satellite Food Vendor Model 3182.
If the Frozen Satellite Food Vendor is to be used for vending
of cold food or slack food products OR if connecting to a
different satellite vendor, then the SC100 must be
reprogrammed. Refer to default configuration instructions
on this section.

SC100 l 3187 l 4212875

14
DEFAULT CONFIGURATION
Note: Setting defaults will change all pricing to $.50 (10 x least coin) and OPTICS will need to be reset
if iVend™ is present.

STEP DISPLAY
1. Press Service Mode Button n . DIAGNOSE
2. Press A , B , A . MENU 3
3. Press A , B . DEFAULT
4. Press B .
If satellite is CF-1000 Model 3162
then press A or C until
FOOD (32°F to 41°F) is displayed. SNACK *
If satellite is FF-2000 Model 3182 COMBO *
then press A or C CHILLED *
until FOOD (32°F to 41°F), or
SLACK (15°F and below), or CLO FRONT*
5.
FROZEN (0°F and below) FOOD *
is displayed. SLACK *
NOTE:
CF-1000 Model 3162 can only FROZEN *
be set to FOOD (32°F to 41°F).
FF-2000 Model 3182 can be set to
FOOD (32°F to 41°F), SLACK (15°F and below)
or FROZEN (0°F and below).
6. Press D to save. DEFAULT
7. Press Service Mode Button n . (Sales Mode)

SC100 l 3187 l 4212875

15
FOR FF-2000 FOOD (32°F TO 41°F) SETTINGS ONLY
If FF-2000 Model 3182 is to be used for vending cold food (32°F to 41°F)
products, then default configuration must be set to FOOD (32°F to 41°F) [see
DEFAULT CONFIGURATION on page 15] and set SENSOR2 as follows:
STEP DISPLAY
1. Press Service Mode Button n DIAGNOSE
Press A , B , A . MENU 3
2. Press B , C , C . SHUTDOWN
Press C , B , C , C . SENSOR2
3. Press B . OFF
If ON is displayed, go to step 6.
4. If OFF is displayed, ON *
then press B twice to turn to ON *.
5. Press D to save. ON
6. Press C . SET POINT
7. Press B . 33F
8. Press C repeatedly until -2OF displays. -2OF
9. Press D to save. SET POINT
10. Press Service Mode Button n . (Sales Mode)

SC100 l 3187 l 4212875

16
SET PRICE
STEP DISPLAY
1. Press Service Mode Button n . DIAGNOSE
Press A , B , C . PRICE
2.
Press B , B . SELECT --
Press selection letter and number on
keypad OR press starting row letter and
ending row letter of selections on keypad
3. SELECT H1
Example:
Press H 1 for selection H1 or
press H L for selection rows H through L.
4. Press D .
Press number keys on keypad A1$OOO.5O
5.
to set price for selection(s).
6. Press D to save. SELECT --
7. Repeat steps 3 through 6 for other selections.
8. Press Service Mode Button n . (Sales Mode)

TEST VEND
STEP DISPLAY
1. Press Service Mode Button n . DIAGNOSE
Press A , A , B . TEST VEND
2.
Press B . SELECT --
Press selection letter and number on
keypad OR press beginning and ending
row letters of selections on keypad.
3. SELECT A1
Example:
Press A 1 for selection A1 or
press A C for selection rows A-B-C.
Press D . A1$OOO.5O
4. The selection and price will display with the test
vend. A triple beep indicates that the selection SELECT --
did not properly vend.
5. Repeat steps 3 through 4 for other selections.
6. Press Service Mode Button n . (Sales Mode)

SC100 l 3187 l 4212875

17
DISPLAY WORKING MOTORS
STEP DISPLAY
1. Press Service Mode Button n . DIAGNOSE
2. Press C , B , B . MOTORS OOO
3. Press Service Mode Button n . (Sales Mode)

ACCOUNTING
To display and clear reset-able sales and vend counters.
STEP DISPLAY
1. Press Service Mode Button n . DIAGNOSE
2. Press C , C , B . HIST SALES
3. Press C , C . RES SALES
Press B to view Total Sales
4. $OOOOOO.OO
since last reset or else go to step 6.
5. Press E . RES SALES
6. Press C . RES COUNT
Press B to view Total Vends
7. OOOOOOOO
since last reset or else go to step 9.
8. Press E . RES COUNT
9. Press C , C , C . SET RANGE
10. Press C , C . RANGEVENDS
11. Press C . CLEAR
To clear all reset-able values
12. CLEARED
press B .
13. Press Service Mode Button n . (Sales Mode)

SC100 l 3187 l 4212875

18
POP DISPLAY WINDOW
If necessary, the POP (point of purchase) Display Window graphic can be
replaced. To replace the graphic, open the SC100 door and find the wing nuts
located behind the Display Window. Remove the wing nuts. Remove the Display
Window Bezel and replace the graphic. Re-install the Display Window Bezel.

Figure 4. Replacing Display Window Graphic

DOOR LOCK & KEYS

A door lock is provided to allow locking of the SC100 door separate from the
satellite. This allows some security of the money in the SC100.
The door lock keys are normally shipped inside the coin cup. Turn the key
clockwise to lock or counter-clockwise to unlock.

IMPORTANT

The SC100 door key must be removed before closing the

satellite food vendor door.

Figure 5. Door Lock

SC100 l 3187 l 4212875

19
SCHEMATIC

SC100 l 3187 l 4212875

20
SCHEMATIC

SC100 l 3187 l 4212875

21
 SC100 l 3187 l 4212875
22
 PARTS MANUAL

SC100 l 3187 l 4212875

23
ORDER INFORMATION
You may order parts from your distributor or from VendNet™. If you have any
questions when placing your order, please call and we will be happy to assist you.
Please provide the following information when placing your order:
§ Quantity required § Vending machine serial number
§ Part number § Shipping and billing address
§ Description of part § Preferred method of shipment
§ Vending machine model number § Customer account number

Note:
When "right" and "left" are used with a part name, it is taken to
mean that the person is facing the machine with the door closed.

MINIMUM ORDER
You may wish to inquire on prices of parts and minimum order amount at the time
of your order. If you order less than the minimum, please check our catalog for
other parts you may require to bring your order up to the minimum amount.
VendNet™ reserves the right to change these requirements without notice.

PAYMENT
Several payment options are available:
§ MASTER CARD § DISCOVER
§ VISA § C.O.D.
§ OPEN ACCOUNT (with approved credit)

TO ORDER BY MAIL
Order forms are available upon request or you may use your own purchase order
form. You may mail your order for replacement parts by providing the necessary
information as requested above to:
VendNet™
165 North 10th Street
Waukee, IA 50263-0488
USA

TO ORDER BY FAX
You may FAX your order for replacement parts by providing the necessary
information as requested above to VendNet™:
1-515-987-4447

SC100 l 3187 l 4212875

24
TO ORDER BY PHONE
You may call in your order for replacement part by providing the necessary
information as requested above to VendNet™ Parts Department.
USA 1-888-259-9965
Canada 1-800-858-4730
Other 1-515-274-3641

TO ORDER ON THE WEB

You may go online and place an order through the internet:
http://www.vendnetusa.com
http://www.vendnet.ws

RETURNS
A restocking charge of 20% will apply to merchandise accepted by VendNet™ for
return, except items processed as warranty. A Return Form clearly stating the
reason for return must accompany all items returned. Return Forms are available
upon request from VendNet™. Returns are to be shipped freight prepaid to:
VendNet™
165 North 10th Street
Waukee, IA 50263-0488

LIMITATION OF LIABILITY
VendNet™ shall not be liable for any injury, loss or damage, whether direct,
incidental or consequential arising out of the use of or the inability to use any part,
parts or products sold by VendNet™. The remedies of the buyer set forth herein
are exclusive, and the liability of VendNet™. With respect to any contract or sale or
anything done in connection herewith, whether in contract, in tort, under any
warranty, or otherwise, shall not, except as expressly provided herein, exceed the
price of the part, parts or products on which such liability is based. Any statements
or representations about the parts or product, other than those contained herein, do
not constitute warranties and shall not be relied on by the buyer and shall have no
force of effect unless contained in a written agreement signed by officers of
VendNet™.

QUESTIONS
If you have any questions:
§ Check our website at www.vendnetusa.com or www.vendnet.ws
§ Send an email to vendnet@vendnetusa.com
§ Or please call VendNet™ by phone and ask for the Parts Department.
We will be happy to assist you.

SC100 l 3187 l 4212875

25
FINAL ASSEMBLY

ITEM PART NUMBER QTY DESCRIPTION

1 (see page 27) 1 Cabinet Parts

2 4212877 1 Build Card
3 4200032.000 1 American Flag Decal
4 4050099 3 5/16 - 18 x ¾ Carriage Bolt
5 1216225.000xxx 1 Top Hinge Weld (specify color)
6 8810015 3 5/16 - 18 Flange Nut
7 (see page 30) 1 Door Parts
8 1216224 1 Side Trim Assembly
4212831.000330 1 Side Trim, Wrinkle Black
4212832.000309 1 Side Trim Retainer, Smooth Black
4203263.500 5.5 ft. ¼ x ½ Foam Tape
7320289.000 9 6 - 32 x ¼ Phillips Pan Head Screw
9 4212876 1 Installation Instructions
10 4060638 1 Key Bag
11 1216235.000xxx 1 Bottom Hinge Weld (specify color)
12 4201239 3 ¼ -20 x ¾ Hex Head Cap Screws
13 4025757 2 ¼ ID Hinge Spacer
14 1216242.000xxx 1 Bottom Hinge (specify color)
15 4212913 1 Lift From Satellite Label
16 8800956 3 8 - 32 Hex Nut
17 4212942.000309 1 Door Harness Cover, Smooth Black
18 7090002.713 2 ¾” Wire Clamp
19 4213014 1 Safety Bracket
20 4213039 1 Unlocking Instructions

SC100 l 3187 l 4212875

26
CABINET PARTS

ITEM PART NUMBER QTY DESCRIPTION

1 4212837.000330 4 Back Retaining Plate, Wrinkle Black

2 1214538.000xxx 1 Cabinet Weld (specify color)
3 4212844.000330 1 Connection Box Cover, Wrinkle Black
4 4212858.000330 1 Lock Stop, Wrinkle Black
5 4050667 2 1/8 Pop Rivet
6 (see page 29) 1 Controller Panel Assembly
7 8800636 22 8 - 18 x 1/2 Phillips Pan Head Screw
8 4212937.016 3 ¼ Nut-sert
9 4212842 4 1/4 - 20 x 1-1/2 Leg Leveler
10 7250135.000 2 1 - 3/8” Hole Plug
11 7250135.001 4 1/2” Hole Plug
12 4050247 2 8 - 32 x 1/2 Phillips Pan Head Machine Screw
13 8800956 2 8 - 32 Hex Nut with External Lock Washer

SC100 l 3187 l 4212875

27
SMALL PARTS PACKAGE SERVICE PACKAGE

SMALL PARTS PACKAGE

ITEM PART NUMBER QTY DESCRIPTION

1 8358425.1 1 10 x 13 x .002 Zip Loc Bag

2 4212825 1 Power Cord - Domestic
3 4050530 5 1/4 - 20 Wing Nut
4 4050393 5 1/4 - 20 x 3/4 Carriage Bolt
5 4212899 5 1/4 - 20 x 1/2 Wing Bolt
6 7200469.014 2 1/4 - 20 x 1/2 Phillips Round Head Machine Screw
7 4212826 1 Umbilical Harness
8 4212910 1 T27 TORX Long Arm Key
9 4060134 1 1” Cable Clamp
10 4212933 1 Umbilical Bracket Cover
11 4033712.000309 1 Cable Tie
12 4212976 1 Machine Lifter, Smooth Black
13 8800636 3 8 - 18 x 1/2 Phillips Pan Head Screw

SERVICE PACKAGE
ITEM PART NUMBER QTY DESCRIPTION

1 4020697 1 Envelope
2 4206816 1 Safety Manual
3 4212875 1 Service & Parts Manual
4 4202750 1 Warranty Card
5 4212619 1 Service Manual Addendum

SC100 l 3187 l 4212875

28
CONTROLLER PANEL ASSEMBLY

ITEM PART NUMBER QTY DESCRIPTION

1 4212490.001 1 RFI Filter IEC Socket

2 4212823 1 Connection Box Label
3 4212822.000309 1 Connection Box, Smooth Black
4 8800956 2 8 - 32 Hex Nut
5 4033712 5 Cable Tie
6 4206570.000 1 Transformer, 110/24 VAC
4206570.001 1 Transformer, 230/24 VAC
7 4209893 1 SM6 Control Board
8 1216223.000309 1 Controller Panel Weld, Smooth Black
9 4206879 7 3/8” Standoff
10 4212829 1 Control Panel Label
11 4050585 2 #8 External Tooth Lock Washer
12 4050240 2 #8 - 32 x 3/8 Phillips Pan Head Machine Screw
13 4203467.003 1 3 Amp Circuit Breaker
14 4202088 1 Switch - Rocker
15 4212830 1 Control Panel Harness (not shown)
16 4212977.000309 1 Mode Button Hood, Smooth Black
17 8800636 2 8 - 18 x ½ Phillips Pan Head Screw

SC100 l 3187 l 4212875

29
DOOR PARTS

ITEM PART NUMBER QTY DESCRIPTION

1 (see page 33) 1 Validator

2 4200660 1 Display
3 4210239.001309 1 Display Mount, Smooth Black
4 4206879 4 3/8 Standoff
5 4202841.009 1 Readout Window, Blue
6 4050667 7 1/8” Pop Rivet
7 4212833.000330 1 Door Retainer, Wrinkle Black
8 8800956 24 8 - 32 Hex Nut
9 1215547.000 1 Key Pad Assembly
4210951 1 Keypad 5x5 SM6
4210952.000309 1 Keypad Back Plate
10 4210978 25 Ellipse Button

SC100 l 3187 l 4212875

30
DOOR PARTS
ITEM PART NUMBER QTY DESCRIPTION

11 4201907.001309 1 Validator Plate, Smooth Black

12 4209639 1 Validator Filler
13 4209656.001309 1 POP Plate, Smooth Black
14 4210396.007 1 Filler Decal - English
15 (see page 32) 1 Coin Insert Assembly (1216187)
16 4050423 4 8 - 18 x 3/8 Phillips Pan Head Screw
17 4210954.000309 1 Insert Mount, Smooth Black
18 4209188 1 Snap Pin
19 4203187 1 Coin Return Button
20 4201942 2 6 - 20 x 3/16 Phillips Pan Head Screw
21 1212097.000950 1 Coin Chute Weld
22 4203186.004 1 Coin Insert - 1-1/8 Black (USA)
4203186.005 1 Coin Insert - 1-3/8 Black (European)
23 4203208 1 Coin Cup Door
24 4050747 4 ¼ Stamped Hex Nut
25 4203207 1 Coin Cup
26 1216233.000309 1 Mech Mount Weld, Smooth Black
27 8800636 3 8 - 18 x ½ Phillips Pan Head Screw
28 1215474 1 Coin Box Weld
29 4212892.000309 1 Coin Box Lock Plate, Smooth Black
30 4212891.000950 1 Coin Box Lock Cam
31 4060366.001 1 Coin Box Lock
32 7320289.000 30 6 - 32 x ¼ Phillips Pan Head Screw
33 1214543.000xxx 1 Door Weld (specify color)
34 4212890 1 POP Window
35 4212889.000330 1 POP Bezel, Wrinkle Black
36 4211227.001 1 Selection Decal / 2-hole
37 4211230.000330 1 Selection Bezel, Wrinkle Black
38 4212012 1 Logo Decal
39 4203209 1 Coin Cup Bezel
40 4212881.000950 1 Lock Cam
41 1215919.003 1 English Instruction Installation
42 4210935 18 Gasket (feet)
43 4201874.000 8 #8 Wing Nut
44 4212942.000309 1 Door Harness Cover, Smooth Black
45 7090002.713 2 ¾” Wire Clamp
46 1216235.000xxx 1 Bottom Door Hinge Weld (varies by color)
47 4212109 1 Coin Box Handle
48 4211419.000309 1 Display Cover, Smooth Black
49 4213003 1 POP Artwork
50 4060318 1 Lock
51 (see page 33) 1 Coin Mech

SC100 l 3187 l 4212875

31
COIN INSERT ASSEMBLY

ITEM PART NUMBER QTY DESCRIPTION

1216187 1 Coin Return Lever Mech

1 4212655.000950 1 Coin Return Lever

2 4021020 1 Spring
3 4209184 1 Snap Plug
4 4212653.000950 1 Coin Return Mount
5 4050511 1 8 - 32 Lock Nut
6 4030100 1 Bushing
7 4212657 1 Tubing Hole Plug
8 4050240 1 8 - 32 x 3/8 Phillips Pan Head Machine Screw

SC100 l 3187 l 4212875

32
COIN MECH - VALIDATOR - CARD READER -
OPTIONS OPTIONS

COIN MECH - OPTIONS

ITEM PART NUMBER QTY DESCRIPTION

4200419.GX 1 Coin Mech, Coinco 9302GX

4200419.CGX 1 Coin Mech, Coinco 9302CGX, Canada
4206699.001 1 Coin Mech, Coinco GBP-G801 Global
4206699.026 1 Coin Mech, Coinco MXP-G703/MDB
4206699.037 1 Coin Mech, Jofemar E/MDB Mexico
4206699.039 1 Coin Mech, Mars CM MDB TRC6512 D
4206699.042 1 Coin Mech, Jofemar J200 E/MDB
4206699.061 1 Coin Mech, Coinco DOP-F701 4 Tube
4206699.075 1 Coin Mech, Conlux MDB CM CCM5G-4, 5 Tube
(5¢ 10¢ 25¢ 25¢ $1)
4206699.077 1 Coin Mech, Conlux MDB CM CCM5G-1, 5 Tube
(5¢ 10¢ 25¢ 25¢ 25¢)

VALIDATOR - CARD READER - OPTIONS

ITEM PART NUMBER QTY DESCRIPTION

4205536.024 1 Validator, Coinco BA32F

4205536.061 1 Validator, Conlux NBM 3120 MDB
4205536.063 1 Validator, Cash Code Costa Rica
4205536.124 1 Validator, Coinco MAG32SA
4205536.129 1 Card Reader, Cash Code MX5-MCP-ST43-ML
4207996.007 1 Validator, Mars Val VN2502

SC100 l 3187 l 4212875

33
The contents of this publication are presented for informational purposes only, and while every effort has been made to ensure their accuracy, they
are not to be construed as warranties or guarantees, express or implied, regarding the products or services described herein or their use or
applicability. We reserve the right to modify or improve the designs or specifications of such products at any time without notice.

VendNet™
165 North 10th Street
Waukee, Iowa 50263-0488
United States of America

USA & Canada International

Service (800) 833-4411

(515) 274-3641
Parts (888) 259-9965
Email vendnet@vendnetusa.com
Web Site www.vendnetusa.com
SC100 l 3187 l 4212875
34
4212875C.DOC