B.Tech VI Semester (R20) I Midterm Examinations, April 2022: Section-I Marks CO BT
B.Tech VI Semester (R20) I Midterm Examinations, April 2022: Section-I Marks CO BT
B.Tech VI Semester (R20) I Midterm Examinations, April 2022: Section-I Marks CO BT
(AUTONOMOUS)
B.Tech VI Semester (R20) I Midterm Examinations, April 2022
Design of Steel Structures-I (20CE602)
SECTION-II
Answer one question from each unit of section-II Marks CO BT
2 Explain types of joints with neat sketchs. 6M CO1 R
(OR)
3 Find out efficiency of lap joints usw M20 grade bolts of 4.6 ,fe 410,250 plates.
6M CO1 An
6 A single bolted double cover butt joint is used to connect two plates
8mm thick. Assuming 20mm bolts at 60mm pitch calculate the 3M CO3 R
efficiency of the joint. The thickness of cover plate is 5mm.
(OR)
7 Determine the strength of a double cover butt cover butt joint used to 3M CO3 An
connect two flats 200 F 12. The thickness of each cover plate is 8
mm. flats have been joined by 9 rivets in chain riveting at a gauge of
60 mm. What is the efficiency of the joint?
BT: R-Remembering, U-Understanding, Ap-Applying, An-Analyzing, E-Evaluate, C-Create
AUDISANKARA INSTITUTE OF TECHNOLOGY:
GUDUR
(AUTONOMOUS)
B.Tech VI Semester (R20) I Midterm Examinations, April 2022
Design of Steel Structures-I (20CE602)
SECTION-II
Answer one question from each unit of section-II Marks CO BT
2 Find out efficiency of lap joints usw M20 grade bolts of 4.6 ,fe 410,250 plates.
6M CO1 R
(OR)
3 Explain advantages and disadvantages of rivited joints. 6M CO1 An
6 Determine the strength of a double cover butt cover butt joint used to
connect two flats 200 F 12. The thickness of each cover plate is 8
3M CO3 R
mm. flats have been joined by 9 rivets in chain riveting at a gauge of
60 mm. What is the efficiency of the joint?
(OR)
7 A single bolted double cover butt joint is used to connect two plates 3M CO3 An
8mm thick. Assuming 20mm bolts at 50mm pitch calculate the
efficiency of the joint.The thickness of cover plate is 4mm.
BT: R-Remembering, U-Understanding, Ap-Applying, An-Analyzing, E-Evaluate, C-Create
AUDISANKARA INSTITUTE OF TECHNOLOGY:
GUDUR
(AUTONOMOUS)
B.Tech VI Semester (R20) I Midterm Examinations, April 2022
Design of Steel Structures-I (20CE602)
Date: Time: 10:00AM to 11:30AM Max.Marks: 20
CO1 Work with relevant IS codes.
CO2 Carry out analysis and design of flexural members and compression members with connection detailing.
CO3 Produce the drawings pertaining to different components of steel structures.
CO4 Design and detail of steel beams under different conditions adopting IS Code.
CO5 Design and detail of built-up columns and column bases adopting IS Code
SECTION-I
Answer the following: Marks CO BT
a) Write any two advantages of rivited joints. 1M CO1 R
1 b) Write any two disadvantages of rivited joints. 1M CO2 Ap
c) Write any two types of rivited joints. 1M CO3 R
d) Define nominal diameter of rive 1M CO1 R
e) Define staggered pitch 1M CO2 R
SECTION-II
Answer one question from each unit of section-II Marks CO BT
2 Explain Stress strain relatationship for steel. 6M CO1 R
(OR)
3 Find out efficiency of lap joints usw M20 grade bolts of 4.6 ,fe 410,250 plates.
6M CO1 An
6 A single bolted double cover butt joint is used to connect two plates
8mm thick. Assuming 20mm bolts at 50mm pitch calculate the 3M CO3 R
efficiency of the joint. The thickness of cover plate is 4mm.
(OR)
7 A bracket carrying a load of 100 kN is connected to column by means 3M CO3 An
oftwo horizontal fillet welds, of 130 mm effective length and 10 mm
thick. The load acts at 70 mm from the face of the column as shown.
Find the throat stress.
BT: R-Remembering, U-Understanding, Ap-Applying, An-Analyzing, E-Evaluate, C-Create