This document provides information about a display board including:
1. The display board measures 70mmx84mmx20mm and has 6 input switches, 4 relay outputs, and 6 collector outputs. 8 different functions can be realized through dial code settings.
2. It provides details on the switch settings including using S1 to set the floor address from 0-63 and switches S1.1 through S1.6 to select floors.
3. The document describes the input and output terminal functions and connections including how to connect the call buttons, relays, and communication cable.
This document provides information about a display board including:
1. The display board measures 70mmx84mmx20mm and has 6 input switches, 4 relay outputs, and 6 collector outputs. 8 different functions can be realized through dial code settings.
2. It provides details on the switch settings including using S1 to set the floor address from 0-63 and switches S1.1 through S1.6 to select floors.
3. The document describes the input and output terminal functions and connections including how to connect the call buttons, relays, and communication cable.
This document provides information about a display board including:
1. The display board measures 70mmx84mmx20mm and has 6 input switches, 4 relay outputs, and 6 collector outputs. 8 different functions can be realized through dial code settings.
2. It provides details on the switch settings including using S1 to set the floor address from 0-63 and switches S1.1 through S1.6 to select floors.
3. The document describes the input and output terminal functions and connections including how to connect the call buttons, relays, and communication cable.
This document provides information about a display board including:
1. The display board measures 70mmx84mmx20mm and has 6 input switches, 4 relay outputs, and 6 collector outputs. 8 different functions can be realized through dial code settings.
2. It provides details on the switch settings including using S1 to set the floor address from 0-63 and switches S1.1 through S1.6 to select floors.
3. The document describes the input and output terminal functions and connections including how to connect the call buttons, relays, and communication cable.
1.1.1 QITS-HCB-B 1. Overview Size: 70mm*84mm*20mm 6 switches input, 4 relays output, 6 collectors output Through the setting of dialing code, 8 different functions can be realized to meet the complex needs of various occasions
2. Size
3. Terminal user manual
4. A Dia-up switch des. S1 1~5 Floor address set/ Range 0-63 S1.1 F0 Floor Choice S1.2 F1 Floor Choice S1.3 F2 Floor Choice S1.4 F3 Floor Choice S1.5 F4 Floor Choice S1.6 F5 Floor Choice B Input-output terminal function des. and wire connection.
Terminal Function Pin definition
1 2 3 4 JP1 Lock elevator +24V +24V Lock elevator input Lock elevator input light output JP2 Fire protection +24V +24V Fire protection Fire protection input input light output JP3 Up call button +24V +24V Up button input button light input output JP4 Down call +24V +24V Down button input button light button input output JP5 Disabled up call +24V +24V Up button input button light button input output JP6 Disabled down +24V +24V Down button input button light call button input output CN1 Power +24V MOD+ MOD- COM communication Terminal CN2 Relay Output See function description for details Terminal CN3 Collector output See function description for details terminal
Attachment: white dots on the PCB which is below the input terminal is correspond to pin 1, the other side pin is 2, 3, 4 by sequence.
A dia-up setting Name Dia-up Function des S1 1~5 Floor Address setting 0-63 S1.1 F0 Floor selection binary bit 0 S1.2 F1 Floor selection binary bit 1 S1.3 F2 Floor selection binary bit 2 S1.4 F3 Floor selection binary bit 3 S1.5 F4 Floor selection binary bit 4 S1.6 F5 Floor selection binary bit 5 B Terminal input
Plug switch wire of the lock ladder and the fire into JP1 & JP2 sockets seperately, and connect the ordinary upline and downlink buttons into JP3 and JP4 sockets seperately, and then connect the two buttons of the disabled up and down into JP5 and JP6 in sockets seperately. Plug the terminal of Modbus communication cable into CN1. Notice: 1. Out call floor cannot be set as 0 2. To avoid external interference of communication signal, Shielded twisted pair is recommended for communication connections 3. It is better to choose shielded cable as the signal line of communication; 4. Strictly follow the terminal symbol wiring, connect firmly. C: Terminal Output There are 4 output relay in the external display call board which are K1, K2, K3 and K4 respectively.
CN2 and Output terminal as below list
Relay name Match CN2 Pin Common pot Function Des
K1 A1 AM Up arrived light K2 A2 AM Down arrived light K3 B1 BM Up arrived Charm K4 B2 BM Down arrived Charm
