JMB38X JMicron
JMB38X JMicron
JMB38X JMicron
Overview
JMB38X is product family that includes 1394a OHCI and Memory Card Reader Host
Controller. They are all 1-lane PCI Express to 1/2-port 1394a and 1-slot SD/MMC/MS/xD
Memory Card Reader Host Controller. The table below shows the brief feature lists of JMB38X
product family.
LQFP48
Package QFN48 QFN48 LQFP48 /QFN48 LQFP48 LQFP48
Version -- C A B -- B -- C A B A B C
On-board www.DataSheet.co.kr
application -- V V X -- V -- V V X V X V
Add-on/ExpressC
ard application -- X X V -- V -- X X V X V X
SDXC UHS-1 -- x v v -- x -- x x x v v v
D3E -- v v x -- v -- v v v v x v
EEPROM -- x x v -- v -- x x v x v x
SPI(Boot) -- x x x -- x -- x v v v v x
CR1_CD2 -- v v x -- x -- v v x v x v
Co-layout Co-layout
“x1 Combo” means 1 set of “4-in-1 Combo Memory Card Reader Mechanism” supporting SD/MMC/MS/MS
Duo/MS-HG (1/4/8-bit) & xD.
Feature
Compliance
• Compliant with PCI Express Base Spec. Revision 1.1
• Compliant with 1394 Open Host Controller Interface (OHCI) Release 1.1
• Compliant with SD Spec. Part 1 Physical Layer Spec. Version 3.00
• Compliant with SD Spec. Part A2 SD Host Controller Standard Spec. Version 2.00
• Compliant with SD Spec. Part E1 SDIO Spec. Version 2.00
• Compliant with SD Spec. Part 2 File System Spec. Version 2.00
• Compliant with MultiMediaCard System Spec. Version 4.2
• Compliant with Memory Stick Standard Format Spec. Version 1.43-00
• Compliant with Memory Stick Standard Memory Stick PRO Format Spec. – without security spec. –
Version 1.02-00
• Compliant with Memory Stick Pro-HG Duo Spec. Version 1.00
• Compliant with xD-Picture CardTM Card Spec. Version 1.20
• Compliant with xD-Picture CardTM Host Guideline Version 1.20
• Compliant with xD-Picture CardTM Format Spec. Version 1.11
Overall
• Integrated 1-Lane PCI Express PHY (2.5Gbps) and 2-port 1394a PHY (100/200/400Mbps)
• Integrated two PLL for both PCI Express bus and 1394a interface
• Output swing control and Automatic impedance calibration for both PCI Express and 1394a PHY
www.DataSheet.co.kr
• Fabricated 0.18um/3.3V CMOS Standard Logic Process with single 3.3V power source
PCI Express
• Supports 1-Lane 2.5Gbps PCI Express bus
• Internal native interface multiplexed to OHCI and Memory Card (SD/MMC/MS/xD)
• All registers of Memory Card accessible in unified memory space
1394a
• Supports 1394a PHY hub function between 2-port
• Supports Hot Plugging on 1394a port
Memory Card
• Support Extended Capacity SD Memory Card (SDXC): more than 32GB and up to and including
2TB
Default speed mode: 3.3v signaling, Frequency up to 25MHz
High speed mode: 3.3v signaling, Frequency up to 50MHz
SDR12/25/50/104, DDR50: 1.8v signaling, Frequency from 25MHz to 208MHz
• Support MSXC memory card: more than 32GB and up to and including 2TB
• Supports 1 set of “4-in-1 Combo Card Reader”
• Programmable IO driving to adjust signal trace length
• Programmable pull high/low control for different memory card bus topology
Product Information
Name Description Controller
JMB380 PCI Express to 1-port 1394a + x1 Combo Card Reader Host Controller
JMB381 PCI Express to 2-port 1394a Host Controller
JMB385 PCI Express to x1 Combo Card Reader Host Controller
JMB387 PCI Express to x1 Combo Card Reader with boot function Host Controller
JMB388 PCI Express to 1-port 1394a + x1 Combo Card Reader Host Controller
with boot function
(SDXC/UHS-1 and MSXC compliant)
JMB389 PCI Express to x1 Combo Card Reader with boot function Host Controller
www.DataSheet.co.kr