Construction of Multi-Purpose Facility (Community Park Center and Other Facilities), Lingayen, Pangasinan

DEPARTMENT OF PUBLIC WORKS AND HIGHWAYS
REGIONAL OFFICE 1
GEOTECHNICAL ENGINEERING STUDY

FINAL REPORT
BASIC INFRASTRUCTURE PROGRAM (BIP), CONSTRUCTION OF

MULTI-PURPOSE FACILITY (COMMUNITY PARK CENTER AND
OTHER FACILITIES), LINGAYEN, PANGASINAN
TABLE OF CONTENTS
1. INTRODUCTION .................................................................................................... 3
2. OBJECTIVES ......................................................................................................... 3
3. REGIONAL GEOLOGY .......................................................................................... 4
4. TECTONIC ACTIVITY AND SEISMICITY .............................................................. 5
5. GEOTECHNICAL INVESTIGATION PROGRAM ................................................... 7
6. RESULTS OF FIELD AND LABORATORY TESTING............................................ 9
7. GEOTECHNICAL PARAMETERS .......................................................................... 9
8. FINDINGS AND RECOMMENDATIONS .............................................................. 11
8.1. Liquefaction Potential ..................................................................................... 11
8.2. Shallow Foundation........................................................................................ 12
8.3. Seismic Design Considerations...................................................................... 13
9. CLOSURE ............................................................................................................ 13

FINAL REPORT
2
FINAL REPORT
BASIC INFRASTRUCTURE PROGRAM (BIP), CONSTRUCTION OF
MULTI-PURPOSE FACILITY (COMMUNITY PARK CENTER AND
OTHER FACILITIES), LINGAYEN, PANGASINAN
1. INTRODUCTION
This final report presents the geotechnical evaluation of the results of the
subsurface investigations conducted for the soil investigation for the proposed
multi-purpose building in Pangasinan.
A total of three (3) boreholes were drilled within the site in order to establish the
subsoil conditions. The samples from the boreholes were recovered and
brought to the soil laboratory for analysis and testing. Laboratory test on soil
samples include:
a. Soil Classification using the USCS (ASTM D2487)

b. Grain Size Analysis (ASTM D422)
c. Atterberg Limits (ASTM D4318)
d. Moisture Content (ASTM D2216)
This report also presents all field and laboratory procedures adopted in the
investigation as well as the evaluation of the initial test results and
recommendations for the flood mitigation structures and drainage systems.
2. OBJECTIVES
The geotechnical engineering study aims to:
a. Assess the geologic and geotechnical conditions of the project site.

b. Evaluate geotechnical parameters necessary for the design of flood
mitigation structures/ earth retaining structures.
c. Assess the adequacy of the flood mitigation structures/ earth retaining
structure against the different modes of failure.
d. Provide recommendations relevant to the proposed development.

FINAL REPORT
3
3. REGIONAL GEOLOGY
Region 1 is located in Stratigraphic 1 – Ilocos (Suyo Schist). The Suyo Schist,

exposed largely in Suyo, Burgos, Ilocos Norte consists of amphibiolite, quartz-
biotite schist, actinolite -tremolite-tal schist and quartzite, which are mostly in
fault contact with sepentinized peridotite. These rocks are probably Cretaceous
age.
The amphibolite schist is light to dark green, fine to medium-grained and is

characterized by planar orientation of green amphibole, chlorite, feldspar and
quartz. The rock exhibits usually nematoblastic texture with large bluish green
amphibole and prismatic, light-colored epidote. The quartz-biotite schist,
consisting dominantly of quartz with lesser amount of biotite, epidote, garnet,
hematite and piedmontite, occurs intimately with the amphibolite schist. The
actinolite-tremolite-talc schist, a product of dynamothermal metamorphism is
structurally confined along the contact of the intensely sheared serpentinized
peridotite.
Figure 1. Geologic Map

(Source: Mines and Geosciences Bureau)

FINAL REPORT
4
4. TECTONIC ACTIVITY AND SEISMICITY
The Philippines accounts for 3.2% of the world’s seismicity. It is situated in the
Circum-Pacific Belt, Ring of Fire, where 80% of the world’s earthquakes occur.
Philippine seismicity is mainly related to plate subduction and in part to strike-
slip motions along trans-current faults.
The country is a north-south strip of lithosphere built partly on obducted oceanic

basement rocks, and by portions of drifted continental crust from southern
China. It is pictured as a wedge caught in between two opposite dipping
trenches. The northwestward moving Pacific Plate pushes the Philippine Sea
Plate beneath the eastern side of the archipelago at the rate of about 7
centimeters per year (PHIVOLCS, 1991). The oceanic parts of the slower
moving Eurasian Plate are being subducted along the western side of Luzon
and Mindoro at the rate of 3 centimeters per year. Table 1 shows the seven (7)
regional seismic zones in the Philippines. These are delineated and interpreted
as follows in the succeeding pages.
Table 1. Philippine Seismic Zones and Earthquake Sources

Related to the east-dipping Manila Trench
Zone-I
Related to the west-dipping East Luzon Trench

Zone-II
Related to the east-dipping Sulu Trench and Antique

Zone-III
Trough
Related to the west-dipping Philippine Trench
Zone-IV
Related to the east-dipping Cotabato Trench

Zone-V
Related to the activities along the Philippine Fault and

Zone-VI
its splays
Possibly related to a west dipping subduction zone
Zone-VII
surfacing at the Agusan-Davao Trough
(Source: Geology and Mineral Resources of the Philippines, Vol.1, 1981)
There is no active or potentially active fault transecting the project site. Based
on the maps published by PHIVOLCS, the active fault nearest to the project
area is the East Zambales Fault.

FINAL REPORT
5
Figure 2. Seismic Map of Region I – Ilocos Region
(Source: PHIVOLCS)

FINAL REPORT
6
The liquefaction hazard map published by Philippine Institute of Volcanology
and Seismology (PHIVOLCS) suggests that the project site is located in areas
susceptible to liquefaction.
Figure 3. Liquefaction Susceptibility Map

(Source: PHIVOLCS)
5. GEOTECHNICAL INVESTIGATION PROGRAM
The geotechnical program consists of three (3) boreholes. The summary of field
investigations is summarized in Table 2.
Table 2. Summary of Boreholes

Borehole
Final Depth (m) Water Elevation (m) Date of Field Testing
Number
1 15.0 1.5
2 15.0 1.0
3 15.0 3.0
Borehole Drilling Procedure

In the boreholes, the Standard Penetration Test (SPT) was carried out, in
accordance with ASTM specifications. For each test, a 2-inch (50.8mm) outside
diameter Spoon Sampler is driven into the soil a distance of 18 (460mm) inches
by means of a 140 lb. (63.5 kg) driving mass falling free from a height of 30
inches (760mm).
The number of blows needed to drive the sampler 18 inches (460mm) is

recorded and the number of blows needed to drive the last 12 inches (305mm)

FINAL REPORT
7
is taken as the N-value. Soil samples were recovered using the spoon sampler
and were then taken to the laboratory for analysis and testing.
When rock formation is encountered, the drilling team resorted to rock coring.
The Rock Quality Designation (RQD) of the rock formation was also recorded.
RQD is an index or measure of the quality of a rock mass and is computed from
recorded core samples as:
𝛴𝛴 𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙ℎ𝑠𝑠 𝑜𝑜𝑜𝑜 𝑖𝑖𝑖𝑖𝑖𝑖𝑖𝑖𝑖𝑖𝑖𝑖 𝑝𝑝𝑝𝑝𝑝𝑝𝑝𝑝𝑝𝑝𝑝𝑝 𝑜𝑜𝑜𝑜 𝑐𝑐𝑐𝑐𝑐𝑐𝑐𝑐 > 100 𝑚𝑚𝑚𝑚

𝑅𝑅𝑅𝑅𝑅𝑅 =
𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙ℎ 𝑜𝑜𝑜𝑜 𝑐𝑐𝑜𝑜𝑜𝑜𝑜𝑜 𝑎𝑎𝑎𝑎𝑎𝑎𝑎𝑎𝑎𝑎𝑎𝑎𝑎𝑎
Complementing the field activities is the laboratory testing of the samples

obtained. The results of the field work and laboratory investigation were then
used to establish the subsurface profile and the parameters for determining
important geotechnical parameters.
LABORATORY TESTING
Representative soil samples obtained during drilling were subjected to the
following laboratory tests:
Grain Size Analysis as per ASTM D422

This method covers the quantitative determination of the distribution of particle
sizes of soils.
Soil was passed through a series of sieves, the weight of soil retained in each
sieve determined and recorded. For each sample analyzed, a gradation curve
was drawn based on the percent finer weight.
Determination of Moisture Content as per ASTM D2216

This method covers the laboratory determination of the water (moisture) content
of soil by weight.
The moisture content of a material is defined as the ratio, expressed as a

percentage, of the mass of pore water in a given mass of material to the mass
of the solid material particles.
Atterberg Limit Test as per ASTM D4318

This test method covers the determination of the liquid limit, plastic limit, and
the plasticity index of soils.
Liquid Limit of Soils

The liquid limit of a soil is the water content expressed as a percentage of the
weight of the oven-dried soil after attaining the condition between the liquid and
plastic states.

FINAL REPORT
8
Plastic Limit and Plasticity Index of Soils
The plastic limit of a soil is the water content expressed as a percentage of the
mass of the oven-dried soil after attaining the condition between the plastic and
semi-solid states. Plasticity Index is defined as the difference between the liquid
and plastic limits of the soil.
6. RESULTS OF FIELD AND LABORATORY TESTING
The results of the subsurface investigation show that the site's subsoil generally
underlain by sand of varying relative condition.
The table below present the subsurface conditions based on the results of field
and laboratory testing.
Table 3. Idealized Subsurface Condition of BH-1

Consistency / Relative
Depth (m) USCS SPT N-value
Condition
0.0 – 15.0 SP 18 – 41 Medium Dense to Dense

Condition

Condition
7. GEOTECHNICAL PARAMETERS
The following tables present the general basis of recommendations on

geotechnical parameters. In the absence of shear strength tests, empirical
correlations with SPT N-values after J.E. Bowles were adopted.
Table 6. Consistency, Unit Weight and Undrained Shear Strength of Clays

Unit Weight Undrained Strength
SPT N-value Consistency
(kN/m )3 (kPa)
0-2 Very soft 11 - 13 < 12
3-5 Soft 14 - 16 12 - 24
6-9 Medium stiff 16 - 17 24 - 48
10 - 16 Stiff 17 - 18 48 - 96
17 - 30 Very stiff 18 - 19 96 - 192
> 30 Hard 19 – 20 > 192
FINAL REPORT
9
Table 7. Relative Density and Unit Weight of Cohesionless Soils
SPT N-value Relative Density Unit Weight (kN/m3)
0-4 Very loose 16
4 - 10 Loose 17
10 - 30 Medium Dense 18
30 - 50 Dense 19
> 50 Very dense 20
Table 8. Angle of Internal Friction of Cohesionless Soils

SPT N-value Angle of Internal Friction (°)
< 10 28
10 - 11 30
12 - 15 31
16 - 18 32
19 - 21 33
22 - 23 34
24 - 27 35
28 - 32 36
33 - 37 37
38 - 39 38
40 - 50 39
> 50 40

FINAL REPORT
10
8. FINDINGS AND RECOMMENDATIONS
8.1. Liquefaction Potential
Soil liquefaction is a phenomenon that occurs mostly in medium to

fine-grained sands wherein a mass of soil loses a large percentage of
its shear resistance when subjected to monotonic, cyclic or shock
loading, and flows in a manner resembling a liquid. Much of the
damage on substructures and foundation during earthquake is
attributed to this phenomenon.
The methods based on the Standard Penetration Test was used in

assessing liquefaction potential on the project site. Based from the
borehole log results as the reference for the computation, the table
below shows the estimated depth of layers that are liquefiable.
Table 9. Liquefaction Analysis

Borehole Depth
CRR CSR FSliq = CRR/CSR Remarks
Number (m)
1.5 0.2 0.097 1.865 No liquefaction
BH-1
10.5 0.3 0.087 3.620 No liquefaction
12.0 0.3 0.084 3.271 No liquefaction
13.5 0.3 0.080 4.219 No liquefaction
15.0 -0.7 0.076 -8.989 Soil will liquefy
BH-2
10.5 0.6 0.087 6.347 No liquefaction
12.0 1.2 0.083 14.400 No liquefaction
13.5 -0.2 0.080 -2.550 Soil will liquefy
15.0 0.1 0.076 1.385 No liquefaction
BH-3
10.5 0.5 0.085 5.446 No liquefaction
12.0 0.6 0.082 6.716 No liquefaction
13.5 0.6 0.079 7.008 No liquefaction
15.0 0.0 0.075 0.666 Soil will liquefy
FINAL REPORT
11
8.2. Shallow Foundation
The choice of the foundation scheme mainly depends on the

magnitude of the structural loads that must be transmitted by the
foundations into the underlying ground. For the project site, the
allowable bearing pressures are listed in Table 10. Moreover, footing
tie beams are recommended to mitigate differential settlement. The
allowable bearing pressures are within the allowable settlement of 25
mm for isolated foundations
Table 10. Allowable Bearing Pressures

Footing Allowable Bearing Capacity
Depth,
Width, Qa (kPa)
D (m) B (m) BH-01 BH-02 BH-03
1.0 220.0 285.0 265.0
1.0 2.0 160.0 205.0 210.0
3.0 145.0 170.0 190.0
1.0 210.0 285.0 285.0
2.0 2.0 185.0 220.0 240.0
3.0 170.0 195.0 220.0
1.0 160.0 205.0 230.0
3.0 2.0 175.0 205.0 240.0
3.0 195.0 210.0 250.0
1.0 160.0 185.0 230.0
4.0 2.0 185.0 205.0 250.0
3.0 205.0 220.0 265.0
1.0 185.0 185.0 250.0
5.0 2.0 205.0 210.0 265.0
3.0 210.0 230.0 265.0

FINAL REPORT
12
8.3. Seismic Design Considerations
As mentioned in the previous section, the East Zambales Fault is the

nearest seismic source to the project site. The site is located
approximately 9 kilometers from the trace of the fault. If the seismic
provisions of the NSCP (2015) shall be adopted, the parameters
shown in Table 11 are recommended.
Table 11. Seismic Design Factors

Seismic Source Agno Fault
Type of Fault Type A
Soil Profile Type SD
Near Source Factor, Na 1.2
Near Source Factor, Nv 1.6
Zone Factor 0.4
Seismic Coefficient, Ca 0.44Na
Seismic Coefficient, Cv 0.64Nv
9. CLOSURE
The foregoing geotechnical assessment was generally based on the results of

subsurface investigation carried out consisting of three (3) boreholes. The
nature and extent of variations between explorations may not become evident
until construction or further investigation of the site.
Thus, it is not the responsibility of the undersigned if design recommendations

contained herein is deviated. In the event that report is used in other projects
for design purpose, the undersigned likewise disclaim its responsibility.
GEOSTRATEGY CONSULTING SERVICES CO.
MC. ARWILL R. DE JESUS

Civil Engineer (PRC No. 0134324)
Geotechnical Engineering Consultant

FINAL REPORT
13
Borehole Location Plan
BH-1
Borehole Northing Easting

BH-01 16.0358333° 120.2308333°
BH-02 16.0355556° 120.2316667°
BH-03 16.0352778° 120.2327778°
Site Pictures
BH-01
BH-02
BH-03
FINAL BOREHOLE LOG AND SUMMARY OF TEST RESULTS
Basic Infrastructure Program (BIP), Construction of Multi-Purpose Facility (Community Park Center and Other Facilities),
Lingayen, Pangasinan
Project Name:
Project Location: Lingayen, Pangasinan
Borehole Number: BH-01 Date started: Final Depth: 15.0m
Sampling used: SPT Date completed: Weather: Sunny
Ground Water Table: 1.5m Client: DPWH Regional Office I
Drilling Method: Wash & Boring Drilled By: D. Mensorado Jr.
Depth Sample REC. RQD SPT BLOWS Consistency / N-VALUES USCS

Sample Type N VALUE Soil Description Remarks
no. (%) (%) PER 15 cm RQD Description 0 20 40 60 Classification
(m)
0.0
SPT
Wash Gray Poorly Graded Sand SP
1.50 Boring SPT-1 30 10 10 10 20 Medium Dense
-1.5
SPT
3.00 Boring SPT-2 31 10 11 10 21 Medium Dense -3.0
SPT
SPT
SPT
SPT
SPT
10.50 Boring SPT-7 17 16 15 31 Dense -10.5
SPT
12.00 Boring SPT-8 15 14 14 28 Medium Dense -12.0
SPT
13.50 Boring SPT-9 15 15 17 32 Dense -13.5
SPT
15.00 Boring SPT-10 18 19 22 41 Dense -15.0
Legends: SPT/Wash Boring 2 Coring xxxx End of Borehole xxxx
Prepared by: Checked by:

John Angelo G. Cruz Kevin J. Tanguin
Laboratory Engineer I Laboratory Engineer II
Project Name:

(m)
0.0
SPT
-1.5
SPT
SPT
SPT
SPT
SPT
SPT
10.50 Boring SPT-7 16 18 18 36 Dense -10.5
SPT
12.00 Boring SPT-8 18 20 20 40 Dense -12.0
SPT
13.50 Boring SPT-9 21 21 21 42 Dense -13.5
SPT
15.00 Boring SPT-10 21 23 23 46 Dense -15.0

Project Name:

(m)
0.0
SPT
-1.5
SPT
SPT
SPT
SPT
7.50 Boring SPT-5 20 15 15 17 32 Dense -7.5
SPT
9.00 Boring SPT-6 20 16 17 17 34 Dense -9.0
SPT
10.50 Boring SPT-7 17 18 17 35 Dense -10.5
SPT
12.00 Boring SPT-8 17 18 18 36 Dense -12.0
SPT
13.50 Boring SPT-9 18 17 19 36 Dense -13.5
SPT
15.00 Boring SPT-10 15 21 24 45 Dense -15.0

PARTICLE SIZE ANALYSIS AND ATTERBERG LIMITS
ASTM D - 422 / ASTM D4318 - 10
Basic Infrastructure Program (BIP), Construction of Multi-Purpose Facility (Community Park
Name of Project:
Center and Other Facilities), Lingayen, Pangasinan

Client: DPWH Regional Office I
Testing Location: Quezon City Boring Date:
Borehole Number: BH-01 Testing Date:
Sample Depth: 0 - 1.5 m Pan (grams): 154.00
Moisture Content, % : 18.35% Wet Weight+Pan (grams): 341.00
Dry Weight+Pan (grams): 312.00
SIEVE SIZE
Mass of Mass of Mass Cumulative
% Retained % Passing
Sieve Sieve + Soil Retained % Retained REMARKS
INCH / NO. MM. (grams) (grams)
(grams) (grams) (grams) (grams)
4 4.75 469.00 474.00 5.00 3.16 3.16 96.84

8 2.36 443.00 452.00 9.00 5.70 8.86 91.14
10 2.00 436.00 449.00 13.00 8.23 17.09 82.91
16 1.18 391.00 411.00 20.00 12.66 29.75 70.25
30 0.60 359.00 387.00 28.00 17.72 47.47 52.53
40 0.43 343.00 365.00 22.00 13.92 61.39 38.61
50 0.36 312.00 327.00 15.00 9.49 70.89 29.11
100 0.15 309.00 333.00 24.00 15.19 86.08 13.92
200 0.08 289.00 309.00 20.00 12.66 98.73 1.27
PAN 359.00 361.00 2.00 1.27 100.00 0.00
Total - - 158.00 100.00 - -
US STANDARD SIEVE SIZE

100 SIEVE SIZE
90 % PASSING
NO. MM.
80 4 4.75 96.8
70 10 2.00 82.9
% Passing
60 40 0.425 38.6
50 200 0.075 1.3
40
30 Liquid Limit: NP
20 Plastic Limit: NP
10 Plasticity Index: NP
0 Group Symbols: SP
1000.00 100.00 10.00 1.00 0.10 0.01 0.00
Sieve Size Gray Poorly Graded
Soil Description:
Sand
Remarks: This report gives the results carried out on samples obtained and tested by Geostrategy Consulting Services Co.
Prepared by: John Angelo G. Cruz Checked By: Kevin J. Tanguin

ASTM D - 422 / ASTM D4318 - 10
Name of Project:

Sample Depth: 1.5-3 m Pan (grams): 152.00
SIEVE SIZE
4 4.75 469.00 472.00 3.00 2.27 2.27 97.73

8 2.36 443.00 449.00 6.00 4.55 6.82 93.18
10 2.00 436.00 438.00 2.00 1.52 8.33 91.67
16 1.18 391.00 401.00 10.00 7.58 15.91 84.09
30 0.60 359.00 369.00 10.00 7.58 23.48 76.52
40 0.43 343.00 358.00 15.00 11.36 34.85 65.15
50 0.36 312.00 342.00 30.00 22.73 57.58 42.42
100 0.15 309.00 336.00 27.00 20.45 78.03 21.97
200 0.08 289.00 316.00 27.00 20.45 98.48 1.52
PAN 359.00 361.00 2.00 1.52 100.00 0.00
Total - - 132.00 100.00 - -

100 SIEVE SIZE
90 % PASSING
NO. MM.
80 4 4.75 97.7
70 10 2.00 91.7
% Passing
60 40 0.425 65.2
50 200 0.075 1.5
40
30 Liquid Limit: NP
0 Group Symbols: SP
1000.00 100.00 10.00 1.00 0.10 0.01 0.00
Soil Description:
Sand

ASTM D - 422 / ASTM D4318 - 10
Name of Project:

Sample Depth: 3.0-4.5 m Pan (grams): 156.00
SIEVE SIZE
4 4.75 469.00 473.00 4.00 2.44 2.44 97.56

8 2.36 443.00 448.00 5.00 3.05 5.49 94.51
10 2.00 436.00 440.00 4.00 2.44 7.93 92.07
16 1.18 391.00 402.00 11.00 6.71 14.63 85.37
30 0.60 359.00 376.00 17.00 10.37 25.00 75.00
40 0.43 343.00 363.00 20.00 12.20 37.20 62.80
50 0.36 312.00 348.00 36.00 21.95 59.15 40.85
100 0.15 309.00 356.00 47.00 28.66 87.80 12.20
200 0.08 289.00 305.00 16.00 9.76 97.56 2.44
PAN 359.00 363.00 4.00 2.44 100.00 0.00
Total - - 164.00 100.00 - -

100 SIEVE SIZE
90 % PASSING
NO. MM.
80 4 4.75 97.6
70 10 2.00 92.1
% Passing
60 40 0.425 62.8
50 200 0.075 2.4
40
30 Liquid Limit: NP
0 Group Symbols: SP
1000.00 100.00 10.00 1.00 0.10 0.01 0.00
Soil Description:
Sand

ASTM D - 422 / ASTM D4318 - 10
Name of Project:

SIEVE SIZE
4 4.75 469.00 469.00 0.00 0.00 0.00 100.00

8 2.36 443.00 446.00 3.00 2.73 2.73 97.27
10 2.00 436.00 441.00 5.00 4.55 7.27 92.73
16 1.18 391.00 399.00 8.00 7.27 14.55 85.45
30 0.60 359.00 367.00 8.00 7.27 21.82 78.18
40 0.43 343.00 352.00 9.00 8.18 30.00 70.00
50 0.36 312.00 332.00 20.00 18.18 48.18 51.82
100 0.15 309.00 341.00 32.00 29.09 77.27 22.73
200 0.08 289.00 311.00 22.00 20.00 97.27 2.73
PAN 359.00 362.00 3.00 2.73 100.00 0.00
Total - - 110.00 100.00 - -

100 SIEVE SIZE
90 % PASSING
NO. MM.
80 4 4.75 100.0
70 10 2.00 92.7
% Passing
60 40 0.425 70.0
50 200 0.075 2.7
40
30 Liquid Limit: NP
0 Group Symbols: SP
1000.00 100.00 10.00 1.00 0.10 0.01 0.00
Soil Description:
Sand

ASTM D - 422 / ASTM D4318 - 10
Name of Project:

SIEVE SIZE
4 4.75 469.00 490.00 21.00 15.91 15.91 84.09

8 2.36 443.00 456.00 13.00 9.85 25.76 74.24
10 2.00 436.00 443.00 7.00 5.30 31.06 68.94
16 1.18 391.00 414.00 23.00 17.42 48.48 51.52
30 0.60 359.00 384.00 25.00 18.94 67.42 32.58
40 0.43 343.00 356.00 13.00 9.85 77.27 22.73
50 0.36 312.00 323.00 11.00 8.33 85.61 14.39
100 0.15 309.00 320.00 11.00 8.33 93.94 6.06
200 0.08 289.00 296.00 7.00 5.30 99.24 0.76
PAN 359.00 360.00 1.00 0.76 100.00 0.00
Total - - 132.00 100.00 - -

100 SIEVE SIZE
90 % PASSING
NO. MM.
80 4 4.75 84.1
70 10 2.00 68.9
% Passing
60 40 0.425 22.7
50 200 0.075 0.8
40
30 Liquid Limit: NP
0 Group Symbols: SP
1000.00 100.00 10.00 1.00 0.10 0.01 0.00
Soil Description:
Sand

ASTM D - 422 / ASTM D4318 - 10
Name of Project:

SIEVE SIZE
4 4.75 469.00 474.00 5.00 3.23 3.23 96.77

8 2.36 443.00 448.00 5.00 3.23 6.45 93.55
10 2.00 436.00 446.00 10.00 6.45 12.90 87.10
16 1.18 391.00 408.00 17.00 10.97 23.87 76.13
30 0.60 359.00 384.00 25.00 16.13 40.00 60.00
40 0.43 343.00 365.00 22.00 14.19 54.19 45.81
50 0.36 312.00 334.00 22.00 14.19 68.39 31.61
100 0.15 309.00 338.00 29.00 18.71 87.10 12.90
200 0.08 289.00 308.00 19.00 12.26 99.35 0.65
PAN 359.00 360.00 1.00 0.65 100.00 0.00
Total - - 155.00 100.00 - -

100 SIEVE SIZE
90 % PASSING
NO. MM.
80 4 4.75 96.8
70 10 2.00 87.1
% Passing
60 40 0.425 45.8
50 200 0.075 0.6
40
30 Liquid Limit: NP
0 Group Symbols: SP
1000.00 100.00 10.00 1.00 0.10 0.01 0.00
Soil Description:
Sand

ASTM D - 422 / ASTM D4318 - 10
Name of Project:

SIEVE SIZE
4 4.75 469.00 484.00 15.00 9.80 9.80 90.20

8 2.36 443.00 452.00 9.00 5.88 15.69 84.31
10 2.00 436.00 441.00 5.00 3.27 18.95 81.05
16 1.18 391.00 400.00 9.00 5.88 24.84 75.16
30 0.60 359.00 376.00 17.00 11.11 35.95 64.05
40 0.43 343.00 367.00 24.00 15.69 51.63 48.37
50 0.36 312.00 340.00 28.00 18.30 69.93 30.07
100 0.15 309.00 342.00 33.00 21.57 91.50 8.50
200 0.08 289.00 300.00 11.00 7.19 98.69 1.31
PAN 359.00 361.00 2.00 1.31 100.00 0.00
Total - - 153.00 100.00 - -

100 SIEVE SIZE
90 % PASSING
NO. MM.
80 4 4.75 90.2
70 10 2.00 81.0
% Passing
60 40 0.425 48.4
50 200 0.075 1.3
40
30 Liquid Limit: NP
0 Group Symbols: SP
1000.00 100.00 10.00 1.00 0.10 0.01 0.00
Soil Description:
Sand

ASTM D - 422 / ASTM D4318 - 10
Name of Project:

SIEVE SIZE
4 4.75 469.00 477.00 8.00 4.85 4.85 95.15

8 2.36 443.00 454.00 11.00 6.67 11.52 88.48
10 2.00 436.00 442.00 6.00 3.64 15.15 84.85
16 1.18 391.00 409.00 18.00 10.91 26.06 73.94
30 0.60 359.00 403.00 44.00 26.67 52.73 47.27
40 0.43 343.00 366.00 23.00 13.94 66.67 33.33
50 0.36 312.00 323.00 11.00 6.67 73.33 26.67
100 0.15 309.00 333.00 24.00 14.55 87.88 12.12
200 0.08 289.00 308.00 19.00 11.52 99.39 0.61
PAN 359.00 360.00 1.00 0.61 100.00 0.00
Total - - 165.00 100.00 - -

100 SIEVE SIZE
90 % PASSING
NO. MM.
80 4 4.75 95.2
70 10 2.00 84.8
% Passing
60 40 0.425 33.3
50 200 0.075 0.6
40
30 Liquid Limit: NP
0 Group Symbols: SP
1000.00 100.00 10.00 1.00 0.10 0.01 0.00
Soil Description:
Sand

ASTM D - 422 / ASTM D4318 - 10
Name of Project:

SIEVE SIZE
4 4.75 469.00 475.00 6.00 5.41 5.41 94.59

8 2.36 443.00 446.00 3.00 2.70 8.11 91.89
10 2.00 436.00 439.00 3.00 2.70 10.81 89.19
16 1.18 391.00 395.00 4.00 3.60 14.41 85.59
30 0.60 359.00 367.00 8.00 7.21 21.62 78.38
40 0.43 343.00 355.00 12.00 10.81 32.43 67.57
50 0.36 312.00 342.00 30.00 27.03 59.46 40.54
100 0.15 309.00 336.00 27.00 24.32 83.78 16.22
200 0.08 289.00 305.00 16.00 14.41 98.20 1.80
PAN 359.00 361.00 2.00 1.80 100.00 0.00
Total - - 111.00 100.00 - -

100 SIEVE SIZE
90 % PASSING
NO. MM.
80 4 4.75 94.6
70 10 2.00 89.2
% Passing
60 40 0.425 67.6
50 200 0.075 1.8
40
30 Liquid Limit: NP
0 Group Symbols: SP
1000.00 100.00 10.00 1.00 0.10 0.01 0.00
Soil Description:
Sand

ASTM D - 422 / ASTM D4318 - 10
Name of Project:

SIEVE SIZE
4 4.75 469.00 472.00 3.00 2.52 2.52 97.48

8 2.36 443.00 446.00 3.00 2.52 5.04 94.96
10 2.00 436.00 442.00 6.00 5.04 10.08 89.92
16 1.18 391.00 405.00 14.00 11.76 21.85 78.15
30 0.60 359.00 379.00 20.00 16.81 38.66 61.34
40 0.43 343.00 358.00 15.00 12.61 51.26 48.74
50 0.36 312.00 323.00 11.00 9.24 60.50 39.50
100 0.15 309.00 332.00 23.00 19.33 79.83 20.17
200 0.08 289.00 311.00 22.00 18.49 98.32 1.68
PAN 359.00 361.00 2.00 1.68 100.00 0.00
Total - - 119.00 100.00 - -

100 SIEVE SIZE
90 % PASSING
NO. MM.
80 4 4.75 97.5
70 10 2.00 89.9
% Passing
60 40 0.425 48.7
50 200 0.075 1.7
40
30 Liquid Limit: NP
0 Group Symbols: SP
1000.00 100.00 10.00 1.00 0.10 0.01 0.00
Soil Description:
Sand

ASTM D - 422 / ASTM D4318 - 10
Name of Project:

SIEVE SIZE
4 4.75 469.00 476.00 7.00 4.27 4.27 95.73

8 2.36 443.00 454.00 11.00 6.71 10.98 89.02
10 2.00 436.00 452.00 16.00 9.76 20.73 79.27
16 1.18 391.00 414.00 23.00 14.02 34.76 65.24
30 0.60 359.00 385.00 26.00 15.85 50.61 49.39
40 0.43 343.00 367.00 24.00 14.63 65.24 34.76
50 0.36 312.00 330.00 18.00 10.98 76.22 23.78
100 0.15 309.00 336.00 27.00 16.46 92.68 7.32
200 0.08 289.00 297.00 8.00 4.88 97.56 2.44
PAN 359.00 363.00 4.00 2.44 100.00 0.00
Total - - 164.00 100.00 - -

100 SIEVE SIZE
90 % PASSING
NO. MM.
80 4 4.75 95.7
70 10 2.00 79.3
% Passing
60 40 0.425 34.8
50 200 0.075 2.4
40
30 Liquid Limit: NP
0 Group Symbols: SP
1000.00 100.00 10.00 1.00 0.10 0.01 0.00
Soil Description:
Sand

ASTM D - 422 / ASTM D4318 - 10
Name of Project:

SIEVE SIZE
4 4.75 469.00 474.00 5.00 3.55 3.55 96.45

8 2.36 443.00 451.00 8.00 5.67 9.22 90.78
10 2.00 436.00 441.00 5.00 3.55 12.77 87.23
16 1.18 391.00 404.00 13.00 9.22 21.99 78.01
30 0.60 359.00 367.00 8.00 5.67 27.66 72.34
40 0.43 343.00 360.00 17.00 12.06 39.72 60.28
50 0.36 312.00 340.00 28.00 19.86 59.57 40.43
100 0.15 309.00 334.00 25.00 17.73 77.30 22.70
200 0.08 289.00 318.00 29.00 20.57 97.87 2.13
PAN 359.00 362.00 3.00 2.13 100.00 0.00
Total - - 141.00 100.00 - -

100 SIEVE SIZE
90 % PASSING
NO. MM.
80 4 4.75 96.5
70 10 2.00 87.2
% Passing
60 40 0.425 60.3
50 200 0.075 2.1
40
30 Liquid Limit: NP
0 Group Symbols: SP
1000.00 100.00 10.00 1.00 0.10 0.01 0.00
Soil Description:
Sand

ASTM D - 422 / ASTM D4318 - 10
Name of Project:

SIEVE SIZE
4 4.75 469.00 475.00 6.00 2.94 2.94 97.06

8 2.36 443.00 450.00 7.00 3.43 6.37 93.63
10 2.00 436.00 443.00 7.00 3.43 9.80 90.20
16 1.18 391.00 405.00 14.00 6.86 16.67 83.33
30 0.60 359.00 380.00 21.00 10.29 26.96 73.04
40 0.43 343.00 369.00 26.00 12.75 39.71 60.29
50 0.36 312.00 353.00 41.00 20.10 59.80 40.20
100 0.15 309.00 362.00 53.00 25.98 85.78 14.22
200 0.08 289.00 313.00 24.00 11.76 97.55 2.45
PAN 359.00 364.00 5.00 2.45 100.00 0.00
Total - - 204.00 100.00 - -

100 SIEVE SIZE
90 % PASSING
NO. MM.
80 4 4.75 97.1
70 10 2.00 90.2
% Passing
60 40 0.425 60.3
50 200 0.075 2.5
40
30 Liquid Limit: NP
0 Group Symbols: SP
1000.00 100.00 10.00 1.00 0.10 0.01 0.00
Soil Description:
Sand

ASTM D - 422 / ASTM D4318 - 10
Name of Project:

SIEVE SIZE
4 4.75 469.00 471.00 2.00 1.34 1.34 98.66

8 2.36 443.00 448.00 5.00 3.36 4.70 95.30
10 2.00 436.00 444.00 8.00 5.37 10.07 89.93
16 1.18 391.00 402.00 11.00 7.38 17.45 82.55
30 0.60 359.00 373.00 14.00 9.40 26.85 73.15
40 0.43 343.00 358.00 15.00 10.07 36.91 63.09
50 0.36 312.00 337.00 25.00 16.78 53.69 46.31
100 0.15 309.00 347.00 38.00 25.50 79.19 20.81
200 0.08 289.00 319.00 30.00 20.13 99.33 0.67
PAN 359.00 360.00 1.00 0.67 100.00 0.00
Total - - 149.00 100.00 - -

100 SIEVE SIZE
90 % PASSING
NO. MM.
80 4 4.75 98.7
70 10 2.00 89.9
% Passing
60 40 0.425 63.1
50 200 0.075 0.7
40
30 Liquid Limit: NP
0 Group Symbols: SP
1000.00 100.00 10.00 1.00 0.10 0.01 0.00
Soil Description:
Sand

ASTM D - 422 / ASTM D4318 - 10
Name of Project:

SIEVE SIZE
4 4.75 469.00 493.00 24.00 13.79 13.79 86.21

8 2.36 443.00 458.00 15.00 8.62 22.41 77.59
10 2.00 436.00 446.00 10.00 5.75 28.16 71.84
16 1.18 391.00 417.00 26.00 14.94 43.10 56.90
30 0.60 359.00 387.00 28.00 16.09 59.20 40.80
40 0.43 343.00 362.00 19.00 10.92 70.11 29.89
50 0.36 312.00 328.00 16.00 9.20 79.31 20.69
100 0.15 309.00 326.00 17.00 9.77 89.08 10.92
200 0.08 289.00 304.00 15.00 8.62 97.70 2.30
PAN 359.00 363.00 4.00 2.30 100.00 0.00
Total - - 174.00 100.00 - -

100 SIEVE SIZE
90 % PASSING
NO. MM.
80 4 4.75 86.2
70 10 2.00 71.8
% Passing
60 40 0.425 29.9
50 200 0.075 2.3
40
30 Liquid Limit: NP
0 Group Symbols: SP
1000.00 100.00 10.00 1.00 0.10 0.01 0.00
Soil Description:
Sand

ASTM D - 422 / ASTM D4318 - 10
Name of Project:

SIEVE SIZE
4 4.75 469.00 478.00 9.00 6.04 6.04 93.96

8 2.36 443.00 450.00 7.00 4.70 10.74 89.26
10 2.00 436.00 449.00 13.00 8.72 19.46 80.54
16 1.18 391.00 405.00 14.00 9.40 28.86 71.14
30 0.60 359.00 382.00 23.00 15.44 44.30 55.70
40 0.43 343.00 361.00 18.00 12.08 56.38 43.62
50 0.36 312.00 336.00 24.00 16.11 72.48 27.52
100 0.15 309.00 335.00 26.00 17.45 89.93 10.07
200 0.08 289.00 302.00 13.00 8.72 98.66 1.34
PAN 359.00 361.00 2.00 1.34 100.00 0.00
Total - - 149.00 100.00 - -

100 SIEVE SIZE
90 % PASSING
NO. MM.
80 4 4.75 94.0
70 10 2.00 80.5
% Passing
60 40 0.425 43.6
50 200 0.075 1.3
40
30 Liquid Limit: NP
0 Group Symbols: SP
1000.00 100.00 10.00 1.00 0.10 0.01 0.00
Soil Description:
Sand

ASTM D - 422 / ASTM D4318 - 10
Name of Project:

SIEVE SIZE
4 4.75 469.00 474.00 5.00 3.07 3.07 96.93

8 2.36 443.00 454.00 11.00 6.75 9.82 90.18
10 2.00 436.00 448.00 12.00 7.36 17.18 82.82
16 1.18 391.00 397.00 6.00 3.68 20.86 79.14
30 0.60 359.00 379.00 20.00 12.27 33.13 66.87
40 0.43 343.00 371.00 28.00 17.18 50.31 49.69
50 0.36 312.00 338.00 26.00 15.95 66.26 33.74
100 0.15 309.00 344.00 35.00 21.47 87.73 12.27
200 0.08 289.00 303.00 14.00 8.59 96.32 3.68
PAN 359.00 365.00 6.00 3.68 100.00 0.00
Total - - 163.00 100.00 - -

100 SIEVE SIZE
90 % PASSING
NO. MM.
80 4 4.75 96.9
70 10 2.00 82.8
% Passing
60 40 0.425 49.7
50 200 0.075 3.7
40
30 Liquid Limit: NP
0 Group Symbols: SP
1000.00 100.00 10.00 1.00 0.10 0.01 0.00
Soil Description:
Sand

ASTM D - 422 / ASTM D4318 - 10
Name of Project:

SIEVE SIZE
4 4.75 469.00 473.00 4.00 2.42 2.42 97.58

8 2.36 443.00 456.00 13.00 7.88 10.30 89.70
10 2.00 436.00 449.00 13.00 7.88 18.18 81.82
16 1.18 391.00 406.00 15.00 9.09 27.27 72.73
30 0.60 359.00 404.00 45.00 27.27 54.55 45.45
40 0.43 343.00 362.00 19.00 11.52 66.06 33.94
50 0.36 312.00 321.00 9.00 5.45 71.52 28.48
100 0.15 309.00 335.00 26.00 15.76 87.27 12.73
200 0.08 289.00 306.00 17.00 10.30 97.58 2.42
PAN 359.00 363.00 4.00 2.42 100.00 0.00
Total - - 165.00 100.00 - -

100 SIEVE SIZE
90 % PASSING
NO. MM.
80 4 4.75 97.6
70 10 2.00 81.8
% Passing
60 40 0.425 33.9
50 200 0.075 2.4
40
30 Liquid Limit: NP
0 Group Symbols: SP
1000.00 100.00 10.00 1.00 0.10 0.01 0.00
Soil Description:
Sand

ASTM D - 422 / ASTM D4318 - 10
Name of Project:

SIEVE SIZE
4 4.75 469.00 477.00 8.00 6.61 6.61 93.39

8 2.36 443.00 447.00 4.00 3.31 9.92 90.08
10 2.00 436.00 438.00 2.00 1.65 11.57 88.43
16 1.18 391.00 393.00 2.00 1.65 13.22 86.78
30 0.60 359.00 366.00 7.00 5.79 19.01 80.99
40 0.43 343.00 353.00 10.00 8.26 27.27 72.73
50 0.36 312.00 346.00 34.00 28.10 55.37 44.63
100 0.15 309.00 340.00 31.00 25.62 80.99 19.01
200 0.08 289.00 308.00 19.00 15.70 96.69 3.31
PAN 359.00 363.00 4.00 3.31 100.00 0.00
Total - - 121.00 100.00 - -

100 SIEVE SIZE
90 % PASSING
NO. MM.
80 4 4.75 93.4
70 10 2.00 88.4
% Passing
60 40 0.425 72.7
50 200 0.075 3.3
40
30 Liquid Limit: NP
0 Group Symbols: SP
1000.00 100.00 10.00 1.00 0.10 0.01 0.00
Soil Description:
Sand

ASTM D - 422 / ASTM D4318 - 10
Name of Project:

SIEVE SIZE
4 4.75 469.00 474.00 5.00 3.91 3.91 96.09

8 2.36 443.00 447.00 4.00 3.13 7.03 92.97
10 2.00 436.00 441.00 5.00 3.91 10.94 89.06
16 1.18 391.00 403.00 12.00 9.38 20.31 79.69
30 0.60 359.00 378.00 19.00 14.84 35.16 64.84
40 0.43 343.00 356.00 13.00 10.16 45.31 54.69
50 0.36 312.00 327.00 15.00 11.72 57.03 42.97
100 0.15 309.00 336.00 27.00 21.09 78.13 21.88
200 0.08 289.00 314.00 25.00 19.53 97.66 2.34
PAN 359.00 362.00 3.00 2.34 100.00 0.00
Total - - 128.00 100.00 - -

100 SIEVE SIZE
90 % PASSING
NO. MM.
80 4 4.75 96.1
70 10 2.00 89.1
% Passing
60 40 0.425 54.7
50 200 0.075 2.3
40
30 Liquid Limit: NP
0 Group Symbols: SP
1000.00 100.00 10.00 1.00 0.10 0.01 0.00
Soil Description:
Sand

ASTM D - 422 / ASTM D4318 - 10
Name of Project:

SIEVE SIZE
4 4.75 469.00 478.00 9.00 5.29 5.29 94.71

8 2.36 443.00 456.00 13.00 7.65 12.94 87.06
10 2.00 436.00 455.00 19.00 11.18 24.12 75.88
16 1.18 391.00 417.00 26.00 15.29 39.41 60.59
30 0.60 359.00 383.00 24.00 14.12 53.53 46.47
40 0.43 343.00 369.00 26.00 15.29 68.82 31.18
50 0.36 312.00 333.00 21.00 12.35 81.18 18.82
100 0.15 309.00 327.00 18.00 10.59 91.76 8.24
200 0.08 289.00 300.00 11.00 6.47 98.24 1.76
PAN 359.00 362.00 3.00 1.76 100.00 0.00
Total - - 170.00 100.00 - -

100 SIEVE SIZE
90 % PASSING
NO. MM.
80 4 4.75 94.7
70 10 2.00 75.9
% Passing
60 40 0.425 31.2
50 200 0.075 1.8
40
30 Liquid Limit: NP
0 Group Symbols: SP
1000.00 100.00 10.00 1.00 0.10 0.01 0.00
Soil Description:
Sand

ASTM D - 422 / ASTM D4318 - 10
Name of Project:

SIEVE SIZE
4 4.75 469.00 476.00 7.00 4.73 4.73 95.27

8 2.36 443.00 453.00 10.00 6.76 11.49 88.51
10 2.00 436.00 444.00 8.00 5.41 16.89 83.11
16 1.18 391.00 407.00 16.00 10.81 27.70 72.30
30 0.60 359.00 365.00 6.00 4.05 31.76 68.24
40 0.43 343.00 362.00 19.00 12.84 44.59 55.41
50 0.36 312.00 338.00 26.00 17.57 62.16 37.84
100 0.15 309.00 332.00 23.00 15.54 77.70 22.30
200 0.08 289.00 320.00 31.00 20.95 98.65 1.35
PAN 359.00 361.00 2.00 1.35 100.00 0.00
Total - - 148.00 100.00 - -

100 SIEVE SIZE
90 % PASSING
NO. MM.
80 4 4.75 95.3
70 10 2.00 83.1
% Passing
60 40 0.425 55.4
50 200 0.075 1.4
40
30 Liquid Limit: NP
0 Group Symbols: SP
1000.00 100.00 10.00 1.00 0.10 0.01 0.00
Soil Description:
Sand

ASTM D - 422 / ASTM D4318 - 10
Name of Project:

SIEVE SIZE
4 4.75 469.00 477.00 8.00 4.47 4.47 95.53

8 2.36 443.00 452.00 9.00 5.03 9.50 90.50
10 2.00 436.00 446.00 10.00 5.59 15.08 84.92
16 1.18 391.00 408.00 17.00 9.50 24.58 75.42
30 0.60 359.00 384.00 25.00 13.97 38.55 61.45
40 0.43 343.00 375.00 32.00 17.88 56.42 43.58
50 0.36 312.00 329.00 17.00 9.50 65.92 34.08
100 0.15 309.00 336.00 27.00 15.08 81.01 18.99
200 0.08 289.00 321.00 32.00 17.88 98.88 1.12
PAN 359.00 361.00 2.00 1.12 100.00 0.00
Total - - 179.00 100.00 - -

100 SIEVE SIZE
90 % PASSING
NO. MM.
80 4 4.75 95.5
70 10 2.00 84.9
% Passing
60 40 0.425 43.6
50 200 0.075 1.1
40
30 Liquid Limit: NP
0 Group Symbols: SP
1000.00 100.00 10.00 1.00 0.10 0.01 0.00
Soil Description:
Sand

ASTM D - 422 / ASTM D4318 - 10
Name of Project:

SIEVE SIZE
4 4.75 469.00 473.00 4.00 2.99 2.99 97.01

8 2.36 443.00 450.00 7.00 5.22 8.21 91.79
10 2.00 436.00 447.00 11.00 8.21 16.42 83.58
16 1.18 391.00 405.00 14.00 10.45 26.87 73.13
30 0.60 359.00 379.00 20.00 14.93 41.79 58.21
40 0.43 343.00 364.00 21.00 15.67 57.46 42.54
50 0.36 312.00 326.00 14.00 10.45 67.91 32.09
100 0.15 309.00 325.00 16.00 11.94 79.85 20.15
200 0.08 289.00 311.00 22.00 16.42 96.27 3.73
PAN 359.00 364.00 5.00 3.73 100.00 0.00
Total - - 134.00 100.00 - -

100 SIEVE SIZE
90 % PASSING
NO. MM.
80 4 4.75 97.0
70 10 2.00 83.6
% Passing
60 40 0.425 42.5
50 200 0.075 3.7
40
30 Liquid Limit: NP
0 Group Symbols: SP
1000.00 100.00 10.00 1.00 0.10 0.01 0.00
Soil Description:
Sand

ASTM D - 422 / ASTM D4318 - 10
Name of Project:

SIEVE SIZE
4 4.75 469.00 472.00 3.00 1.78 1.78 98.22

8 2.36 443.00 450.00 7.00 4.14 5.92 94.08
10 2.00 436.00 441.00 5.00 2.96 8.88 91.12
16 1.18 391.00 420.00 29.00 17.16 26.04 73.96
30 0.60 359.00 390.00 31.00 18.34 44.38 55.62
40 0.43 343.00 368.00 25.00 14.79 59.17 40.83
50 0.36 312.00 333.00 21.00 12.43 71.60 28.40
100 0.15 309.00 332.00 23.00 13.61 85.21 14.79
200 0.08 289.00 312.00 23.00 13.61 98.82 1.18
PAN 359.00 361.00 2.00 1.18 100.00 0.00
Total - - 169.00 100.00 - -

100 SIEVE SIZE
90 % PASSING
NO. MM.
80 4 4.75 98.2
70 10 2.00 91.1
% Passing
60 40 0.425 40.8
50 200 0.075 1.2
40
30 Liquid Limit: NP
0 Group Symbols: SP
1000.00 100.00 10.00 1.00 0.10 0.01 0.00
Soil Description:
Sand

ASTM D - 422 / ASTM D4318 - 10
Name of Project:

SIEVE SIZE
4 4.75 469.00 482.00 13.00 9.22 9.22 90.78

8 2.36 443.00 452.00 9.00 6.38 15.60 84.40
10 2.00 436.00 452.00 16.00 11.35 26.95 73.05
16 1.18 391.00 402.00 11.00 7.80 34.75 65.25
30 0.60 359.00 380.00 21.00 14.89 49.65 50.35
40 0.43 343.00 357.00 14.00 9.93 59.57 40.43
50 0.36 312.00 338.00 26.00 18.44 78.01 21.99
100 0.15 309.00 332.00 23.00 16.31 94.33 5.67
200 0.08 289.00 296.00 7.00 4.96 99.29 0.71
PAN 359.00 360.00 1.00 0.71 100.00 0.00
Total - - 141.00 100.00 - -

100 SIEVE SIZE
90 % PASSING
NO. MM.
80 4 4.75 90.8
70 10 2.00 73.0
% Passing
60 40 0.425 40.4
50 200 0.075 0.7
40
30 Liquid Limit: NP
0 Group Symbols: SP
1000.00 100.00 10.00 1.00 0.10 0.01 0.00
Soil Description:
Sand

ASTM D - 422 / ASTM D4318 - 10
Name of Project:

SIEVE SIZE
4 4.75 469.00 473.00 4.00 2.30 2.30 97.70

8 2.36 443.00 456.00 13.00 7.47 9.77 90.23
10 2.00 436.00 455.00 19.00 10.92 20.69 79.31
16 1.18 391.00 394.00 3.00 1.72 22.41 77.59
30 0.60 359.00 382.00 23.00 13.22 35.63 64.37
40 0.43 343.00 375.00 32.00 18.39 54.02 45.98
50 0.36 312.00 336.00 24.00 13.79 67.82 32.18
100 0.15 309.00 346.00 37.00 21.26 89.08 10.92
200 0.08 289.00 306.00 17.00 9.77 98.85 1.15
PAN 359.00 361.00 2.00 1.15 100.00 0.00
Total - - 174.00 100.00 - -

100 SIEVE SIZE
90 % PASSING
NO. MM.
80 4 4.75 97.7
70 10 2.00 79.3
% Passing
60 40 0.425 46.0
50 200 0.075 1.1
40
30 Liquid Limit: NP
0 Group Symbols: SP
1000.00 100.00 10.00 1.00 0.10 0.01 0.00
Soil Description:
Sand

ASTM D - 422 / ASTM D4318 - 10
Name of Project:

SIEVE SIZE
4 4.75 469.00 476.00 7.00 4.38 4.38 95.63

8 2.36 443.00 453.00 10.00 6.25 10.63 89.38
10 2.00 436.00 444.00 8.00 5.00 15.63 84.38
16 1.18 391.00 403.00 12.00 7.50 23.13 76.88
30 0.60 359.00 405.00 46.00 28.75 51.88 48.13
40 0.43 343.00 358.00 15.00 9.38 61.25 38.75
50 0.36 312.00 325.00 13.00 8.13 69.38 30.63
100 0.15 309.00 337.00 28.00 17.50 86.88 13.13
200 0.08 289.00 304.00 15.00 9.38 96.25 3.75
PAN 359.00 365.00 6.00 3.75 100.00 0.00
Total - - 160.00 100.00 - -

100 SIEVE SIZE
90 % PASSING
NO. MM.
80 4 4.75 95.6
70 10 2.00 84.4
% Passing
60 40 0.425 38.8
50 200 0.075 3.8
40
30 Liquid Limit: NP
0 Group Symbols: SP
1000.00 100.00 10.00 1.00 0.10 0.01 0.00
Soil Description:
Sand

ASTM D - 422 / ASTM D4318 - 10
Name of Project:

SIEVE SIZE
4 4.75 469.00 479.00 10.00 6.45 6.45 93.55

8 2.36 443.00 448.00 5.00 3.23 9.68 90.32
10 2.00 436.00 442.00 6.00 3.87 13.55 86.45
16 1.18 391.00 400.00 9.00 5.81 19.35 80.65
30 0.60 359.00 370.00 11.00 7.10 26.45 73.55
40 0.43 343.00 359.00 16.00 10.32 36.77 63.23
50 0.36 312.00 350.00 38.00 24.52 61.29 38.71
100 0.15 309.00 344.00 35.00 22.58 83.87 16.13
200 0.08 289.00 311.00 22.00 14.19 98.06 1.94
PAN 359.00 362.00 3.00 1.94 100.00 0.00
Total - - 155.00 100.00 - -

100 SIEVE SIZE
90 % PASSING
NO. MM.
80 4 4.75 93.5
70 10 2.00 86.5
% Passing
60 40 0.425 63.2
50 200 0.075 1.9
40
30 Liquid Limit: NP
0 Group Symbols: SP
1000.00 100.00 10.00 1.00 0.10 0.01 0.00
Soil Description:
Sand

ASTM D - 422 / ASTM D4318 - 10
Name of Project:

SIEVE SIZE
4 4.75 469.00 476.00 7.00 5.11 5.11 94.89

8 2.36 443.00 448.00 5.00 3.65 8.76 91.24
10 2.00 436.00 440.00 4.00 2.92 11.68 88.32
16 1.18 391.00 401.00 10.00 7.30 18.98 81.02
30 0.60 359.00 377.00 18.00 13.14 32.12 67.88
40 0.43 343.00 354.00 11.00 8.03 40.15 59.85
50 0.36 312.00 331.00 19.00 13.87 54.01 45.99
100 0.15 309.00 340.00 31.00 22.63 76.64 23.36
200 0.08 289.00 317.00 28.00 20.44 97.08 2.92
PAN 359.00 363.00 4.00 2.92 100.00 0.00
Total - - 137.00 100.00 - -

100 SIEVE SIZE
90 % PASSING
NO. MM.
80 4 4.75 94.9
70 10 2.00 88.3
% Passing
60 40 0.425 59.9
50 200 0.075 2.9
40
30 Liquid Limit: NP
0 Group Symbols: SP
1000.00 100.00 10.00 1.00 0.10 0.01 0.00
Soil Description:
Sand


Construction of Multi-Purpose Facility (Community Park Center and Other Facilities), Lingayen, Pangasinan

Uploaded by

Copyright:

Available Formats

Construction of Multi-Purpose Facility (Community Park Center and Other Facilities), Lingayen, Pangasinan

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Construction of Multi-Purpose Facility (Community Park Center and Other Facilities), Lingayen, Pangasinan

Uploaded by

Copyright:

Available Formats

DEPARTMENT OF PUBLIC WORKS AND HIGHWAYS

GEOTECHNICAL ENGINEERING STUDY

BASIC INFRASTRUCTURE PROGRAM (BIP), CONSTRUCTION OF

GEOTECHNICAL ENGINEERING STUDY

a. Soil Classification using the USCS (ASTM D2487)

The geotechnical engineering study aims to:

a. Assess the geologic and geotechnical conditions of the project site.

GEOTECHNICAL ENGINEERING STUDY

Region 1 is located in Stratigraphic 1 – Ilocos (Suyo Schist). The Suyo Schist,

The amphibolite schist is light to dark green, fine to medium-grained and is

Figure 1. Geologic Map

GEOTECHNICAL ENGINEERING STUDY

The country is a north-south strip of lithosphere built partly on obducted oceanic

Table 1. Philippine Seismic Zones and Earthquake Sources

Related to the west-dipping East Luzon Trench

Related to the east-dipping Sulu Trench and Antique

Related to the east-dipping Cotabato Trench

Related to the activities along the Philippine Fault and

GEOTECHNICAL ENGINEERING STUDY

GEOTECHNICAL ENGINEERING STUDY

Figure 3. Liquefaction Susceptibility Map

5. GEOTECHNICAL INVESTIGATION PROGRAM

Table 2. Summary of Boreholes

Borehole Drilling Procedure

The number of blows needed to drive the sampler 18 inches (460mm) is

GEOTECHNICAL ENGINEERING STUDY

𝛴𝛴 𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙ℎ𝑠𝑠 𝑜𝑜𝑜𝑜 𝑖𝑖𝑖𝑖𝑖𝑖𝑖𝑖𝑖𝑖𝑖𝑖 𝑝𝑝𝑝𝑝𝑝𝑝𝑝𝑝𝑝𝑝𝑝𝑝 𝑜𝑜𝑜𝑜 𝑐𝑐𝑐𝑐𝑐𝑐𝑐𝑐 > 100 𝑚𝑚𝑚𝑚

Complementing the field activities is the laboratory testing of the samples

Grain Size Analysis as per ASTM D422

Determination of Moisture Content as per ASTM D2216

The moisture content of a material is defined as the ratio, expressed as a

Atterberg Limit Test as per ASTM D4318

Liquid Limit of Soils

GEOTECHNICAL ENGINEERING STUDY

6. RESULTS OF FIELD AND LABORATORY TESTING

Table 3. Idealized Subsurface Condition of BH-1

Table 4. Idealized Subsurface Condition of BH-2

Table 5. Idealized Subsurface Condition of BH-3

The following tables present the general basis of recommendations on

Table 6. Consistency, Unit Weight and Undrained Shear Strength of Clays

Table 8. Angle of Internal Friction of Cohesionless Soils

GEOTECHNICAL ENGINEERING STUDY

Soil liquefaction is a phenomenon that occurs mostly in medium to

The methods based on the Standard Penetration Test was used in

Table 9. Liquefaction Analysis

The choice of the foundation scheme mainly depends on the

Table 10. Allowable Bearing Pressures

GEOTECHNICAL ENGINEERING STUDY

As mentioned in the previous section, the East Zambales Fault is the

Table 11. Seismic Design Factors

The foregoing geotechnical assessment was generally based on the results of

Thus, it is not the responsibility of the undersigned if design recommendations

GEOSTRATEGY CONSULTING SERVICES CO.

MC. ARWILL R. DE JESUS

GEOTECHNICAL ENGINEERING STUDY

Borehole Northing Easting

Depth Sample REC. RQD SPT BLOWS Consistency / N-VALUES USCS

Legends: SPT/Wash Boring 2 Coring xxxx End of Borehole xxxx

Prepared by: Checked by:

Depth Sample REC. RQD SPT BLOWS Consistency / N-VALUES USCS