Is Now Part of

To learn more about ON Semiconductor, please visit our website at

www.onsemi.com

ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number
of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right
to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON
Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON
Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s
technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA
Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended
or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out
of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor
is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
 H11L1M, H11L2M, H11L3M — 6-Pin DIP Schmitt Trigger Output Optocoupler
September 2014

H11L1M, H11L2M, H11L3M

6-Pin DIP Schmitt Trigger Output Optocoupler
Features Description
■ High Data Rate, 1 MHz Typical (NRZ) The H11LXM series has a high-speed integrated circuit
■ Free from Latch-up and Oscilliation Throughout detector optically coupled to a gallium-arsenide infrared
Voltage and Temperature Ranges emitting diode. The output incorporates a Schmitt trigger,
■ Microprocessor Compatible Drive
which provides hysteresis for noise immunity and pulse
shaping. The detector circuit is optimized for simplicity of
■ Logic Compatible Output Sinks 16 mA at 0.4 V
operation and utilizes an open-collector output for
Maximum
maximum application flexibility.
■ Guaranteed On/Off Threshold Hysteresis
■ Wide Supply Voltage Capability, Compatible with All
Popular Logic Systems
■ Safety and Regulatory Approvals:
– UL1577, 4,170 VACRMS for 1 Minute
– DIN-EN/IEC60747-5-5, 850 V Peak Working
Insulation Voltage

Applications
■ Logic-to-Logic Isolator
■ Programmable Current Level Sensor
■ Line Receiver—Eliminate Noise and Transient
Problems
■ AC to TTL Conversion—Square Wave Shaping
■ Digital Programming of Power Supplies
■ Interfaces Computers with Peripherals

Schematic Package Outlines

ANODE 1 6 VCC

CATHODE 2 5 GND
Truth Table
Input Output
3 4 VO H L
L H

Figure 1. Schematic Figure 2. Package Outlines

©2005 Fairchild Semiconductor Corporation www.fairchildsemi.com

H11L1M, H11L2M, H11L3M Rev. 1.0.7
 H11L1M, H11L2M, H11L3M — 6-Pin DIP Schmitt Trigger Output Optocoupler
Safety and Insulation Ratings
As per DIN EN/IEC 60747-5-5, this optocoupler is suitable for “safe electrical insulation” only within the safety limit
data. Compliance with the safety ratings shall be ensured by means of protective circuits.

Parameter Characteristics
Installation Classifications per DIN VDE < 150 VRMS I–IV
0110/1.89 Table 1, For Rated Mains Voltage < 300 VRMS I–IV
Climatic Classification 55/100/21
Pollution Degree (DIN VDE 0110/1.89) 2
Comparative Tracking Index 175

Symbol Parameter Value Unit

Input-to-Output Test Voltage, Method A, VIORM x 1.6 = VPR,
1360 Vpeak
Type and Sample Test with tm = 10 s, Partial Discharge < 5 pC
VPR
Input-to-Output Test Voltage, Method B, VIORM x 1.875 = VPR,
1594 Vpeak
100% Production Test with tm = 1 s, Partial Discharge < 5 pC
VIORM Maximum Working Insulation Voltage 850 Vpeak
VIOTM Highest Allowable Over-Voltage 6000 Vpeak
External Creepage ≥7 mm
External Clearance ≥7 mm
External Clearance (for Option TV, 0.4" Lead Spacing) ≥ 10 mm
DTI Distance Through Insulation (Insulation Thickness) ≥ 0.5 mm
TS Case Temperature(1) 175 °C
IS,INPUT Input Current(1) 350 mA
PS,OUTPUT Output Power(1) 800 mW
RIO Insulation Resistance at TS, VIO = 500 V(1) > 109 Ω

Note:
1. Safety limit values – maximum values allowed in the event of a failure.

©2005 Fairchild Semiconductor Corporation www.fairchildsemi.com

H11L1M, H11L2M, H11L3M Rev. 1.0.7 2
 H11L1M, H11L2M, H11L3M — 6-Pin DIP Schmitt Trigger Output Optocoupler
Absolute Maximum Ratings
Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be
operable above the recommended operating conditions and stressing the parts to these levels is not recommended.
In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability.
The absolute maximum ratings are stress ratings only. TA = 25°C unless otherwise specified.

Symbol Parameters Value Units

Total Device
TSTG Storage Temperature -40 to +125 °C
TOPR Operating Temperature -40 to +85 °C
TJ Junction Temperature -40 to +125 °C
TSOL Lead Solder Temperature 260 for 10 seconds °C
PD Total Device Power Dissipation at 25°C 250 mW
Derate Above 25°C 2.94 mW/°C
Emitter
IF Continuous Forward Current 30 mA
VR Reverse Voltage 6 V
IF(pk) Forward Current – Peak (1 µs pulse, 300 pps) 100 mA
PD LED Power Dissipation 60 mW
Detector
PD Detector Power Dissipation 150 mW
VO V45 Allowed Range 0 to 16 V
VCC V65 Allowed Range 3 to 16 V
IO I4 Output Current 50 mA

©2005 Fairchild Semiconductor Corporation www.fairchildsemi.com

H11L1M, H11L2M, H11L3M Rev. 1.0.7 3
 H11L1M, H11L2M, H11L3M — 6-Pin DIP Schmitt Trigger Output Optocoupler
Electrical Characteristics
TA = 25°C unless otherwise specified.

Individual Component Characteristics

Symbol Parameters Test Conditions Device Min. Typ. Max. Units
Emitter
VF Input Forward Voltage IF = 10 mA All 1.2 1.5 V
IF = 0.3 mA 0.75 1.0
IR Reverse Current VR = 3 V All 10 µA
CJ Capacitance V = 0, f = 1.0 MHz All 100 pF
Detector
VCC Operating Voltage Range All 3 15 V
ICC(off) Supply Current IF = 0, VCC = 5 V All 1.6 5.0 mA
IOH Output Current, High IF = 0, VCC = VO = 15 V All 100 µA

Transfer Characteristics
Symbol Parameter Test Conditions Device Min. Typ. Max. Units
DC Characteristics
ICC(on) Supply Current IF = 10 mA, VCC = 5 V All 1.6 5.0 mA
VOL Output Voltage, Low RL= 270 Ω,VCC = 5 V, All 0.2 0.4 V
IF = IF(on) max.
IF(on) Turn-On Threshold Current(2) RL = 270 Ω, VCC = 5 V H11L1M 1.6 mA
H11L2M 10.0
H11L3M 5.0
IF(off) Turn-Off Threshold Current RL = 270 Ω, VCC = 5 V All 0.3 1.0 mA
IF(off) / IF(on) Hysteresis Ratio RL = 270 Ω, VCC = 5 V All 0.50 0.75 0.90
AC Characteristics, Switching Speed
ton Turn-On Time RL = 270 Ω, VCC = 5 V, All 1.0 4.0 µs
IF = IF(on), TA = 25°C
tf Fall Time RL = 270 Ω, VCC = 5 V, All 0.1 µs
IF = IF(on), TA = 25°C
toff Turn-Off Time RL = 270 Ω, VCC = 5 V, All 1.2 4.0 µs
IF = IF(on), TA = 25°C
tr Rise Time RL = 270 Ω, VCC = 5 V, All 0.1 µs
IF = IF(on), TA = 25°C
Data Rate All 1.0 MHz

Isolation Characteristics
Symbol Parameter Test Conditions Min. Typ. Max. Units
VISO Input-Output Isolation Voltage t = 1 Minute 4170 VACRMS
CISO Isolation Capacitance VI-O = 0 V, f = 1 MHz 0.4 0.6 pF
RISO Isolation Resistance VI-O = ± 500 VDC, TA = 25°C 1011 Ω
Note:
2. Maximum IF(ON) is the maximum current required to trigger the output. For example, a 1.6 mA maximum trigger current would
require the LED to be driven at a current greater than 1.6 mA to guarantee the device turns on. A 10% guard band is recommended
to account for degradation of the LED over its lifetime. The maximum allowable LED drive current is 30 mA.

©2005 Fairchild Semiconductor Corporation www.fairchildsemi.com

H11L1M, H11L2M, H11L3M Rev. 1.0.7 4
 H11L1M, H11L2M, H11L3M — 6-Pin DIP Schmitt Trigger Output Optocoupler
Typical Performance Curves
6 1.6

IF – THRESHOLD CURRENT (NORMALIZED)

VCC = 5 V IF NORMALIZED TO:
V OH RL = 270 Ω IF(ON) AT VCC = 5 V
5 TA = 25°C 1.4 TA = 25oC
VO – OUTPUT VOLTAGE (V)

4 1.2

I F(OFF) I F(ON) TURN ON THRESHOLD

3 1.0

TURN OFF THRESHOLD

0.8
2

0.6
1

V OL
0.4
0 0 2 4 6 8 10 12 14 16
0 1 2 3
IF – INPUT CURRENT (mA) VCC – SUPPLY VOLTAGE (V)

Figure 3. Transfer Characteristics Figure 4. Threshold Current vs. Supply Voltage

IF(On) , IF(Off) – THRESHOLD CURRENT (NORMALIZED)

1.6 2

1.4
VOL - OUTPUT VOLTAGE, LOW (V)
1
1.2 0.9
0.8
0.7
1.0 0.6
0.5
0.8 0.4
NORMALIZED TO:
VCC = 5 V 0.3
0.6 TA = 25oC

0.2
0.4 IF = I F(ON)
V CC = 5 V
0.2 R L = 270 Ω
-50 -25 0 25 50 75 100 0.1
1 10 100
TA – TEMPERATURE ( oC)
IO – LOAD CURRENT (mA)

Figure 5. Threshold Current vs. Supply Temperature Figure 6. Output Voltage, Low vs. Load Current

6 1.7

TA = 0 °C
VF – FORWARD VOLTAGE (V)

5 1.6
I F = 5mA 25 °C

70 °C
I C – SUPPLY CURRENT (mA)

1.5
4

1.4
3 TA = 55°C

1.3
2 TA = 25°C

1.2
TA = 0°C 25 °C 70 °C
1 TA = 100°C
I F = 0 mA
1.1

0
0 2 4 6 8 10 12 14 16 1.0
1 10 100
VCC – SUPPLY VOLTAGE (V)
IF – LED FORWARD CURRENT (mA)

Figure 7. Supply Current vs. Supply Voltage Figure 8. LED Forward Voltage vs. Forward Current

©2005 Fairchild Semiconductor Corporation www.fairchildsemi.com

H11L1M, H11L2M, H11L3M Rev. 1.0.7 5
 H11L1M, H11L2M, H11L3M — 6-Pin DIP Schmitt Trigger Output Optocoupler
Typical Performance Curves (Continued)

C VIN 5V
I6 50%
5V
IF 0

RE 1 H11L1 6 RL 270Ω

VIN 4
VO
ton toff

tr = tf ≤ 0.01 μS 2 5 0.1μF
Z = 50 Ω
10%
VO
90%

tf tr

Figure 9. Switching Test Circuit and Waveforms

Reflow Profile

300
260°C
280
260
>245°C = 42 Sec
240
220
200
180
Time above
160 183°C = 90 Sec
°C
140
120
100 1.822°C/Sec Ramp up rate
80
60
40
20 33 Sec

0
0 60 120 180 270 360
Time (s)

Figure 10. Reflow Profile

©2005 Fairchild Semiconductor Corporation www.fairchildsemi.com

H11L1M, H11L2M, H11L3M Rev. 1.0.7 6
 H11L1M, H11L2M, H11L3M — 6-Pin DIP Schmitt Trigger Output Optocoupler
Ordering Information
Part Number Package Packing Method
H11L1M DIP 6-Pin Tube (50 Units)
H11L1SM SMT 6-Pin (Lead Bend) Tube (50 Units)
H11L1SR2M SMT 6-Pin (Lead Bend) Tape and Reel (1000 Units)
H11L1VM DIP 6-Pin, DIN EN/IEC60747-5-5 Option Tube (50 Units)
H11L1SVM SMT 6-Pin (Lead Bend), DIN EN/IEC60747-5-5 Option Tube (50 Units)
H11L1SR2VM SMT 6-Pin (Lead Bend), DIN EN/IEC60747-5-5 Option Tape and Reel (1000 Units)
H11L1TVM DIP 6-Pin, 0.4” Lead Spacing, DIN EN/IEC60747-5-5 Option Tube (50 Units)
Note:
3. The product orderable part number system listed in this table also applies to the H11L2M and H11L3M product
families.

Marking Information

H11L1 2

6
V X YY Q

3 4 5

Figure 11. Top Mark

Table 1. Top Mark Definitions

1 Fairchild Logo
2 Device Number
3 DIN EN/IEC60747-5-5 Option (only appears on component ordered with this option)
4 One-Digit Year Code, e.g., “4”
5 Digit Work Week, Ranging from “01” to “53”
6 Assembly Package Code

©2005 Fairchild Semiconductor Corporation www.fairchildsemi.com

H11L1M, H11L2M, H11L3M Rev. 1.0.7 7
 ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent
coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein.
ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards,
regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or
specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer
application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not
designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification
in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized
application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and
expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such
claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This
literature is subject to all applicable copyright laws and is not for resale in any manner.

PUBLICATION ORDERING INFORMATION

LITERATURE FULFILLMENT: N. American Technical Support: 800−282−9855 Toll Free ON Semiconductor Website: www.onsemi.com
Literature Distribution Center for ON Semiconductor USA/Canada
19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA Europe, Middle East and Africa Technical Support: Order Literature: http://www.onsemi.com/orderlit
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada Phone: 421 33 790 2910
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada Japan Customer Focus Center For additional information, please contact your local
Email: orderlit@onsemi.com Phone: 81−3−5817−1050 Sales Representative

© Semiconductor Components Industries, LLC www.onsemi.com www.onsemi.com

1
Mouser Electronics

Authorized Distributor

Click to View Pricing, Inventory, Delivery & Lifecycle Information:

Fairchild Semiconductor:
H11L1SR2VM H11L1SM H11L1SVM H11L1SR2M H11L1VM H11L1M H11L1TVM