www.co-ax.com data sheet E2.

01-07/2016

butterfly valve
type QUADAX - lug type

butterfly valve bare shaft

pressure range PN 0-63 bar
orifice DN 50-1000 mm
connection flange

body materials carbon steel, stainless steel, special material (duplex, inconell, bronze)
Above stated body materials refer valve seat materials inconell, others on request
to the valve port connections that get in
contact with the media only! seal materials graphite / stainless steel, inconell, stainless steel, PTFE

general specifications
ports flange PN 10 / 16 / 25 / 40 / 63
details needed
ANSI 150 / 300 / 600
■ size function NC / NO / DA depending upon actuator
■ pipe connection pressure range body pressure 0 to 63 bar
■ operating pressure Δp standard shaft 52 bar in both directions
■ flow rate
■ Δp Kv value m³/h see table
■ closing time leakage rate 1 DIN 3230
■ media A DIN EN 12266
■ process temperature BS 6364
■ outside temperature Fire safe
flow direction A ð B as marked
switching time s DN/100
process- and outside temperature standard -10 °C to +450 °C
with special materials -270 °C to +800 °C
limit switches option
approvals PED / Fire safe / BAM / TA Luft / ATEX in further
weight kg see table
additional equipment upon request

Kv-curve
97,1 100
100
Kv in % of Kv max.

90 82,5

80

70 64,6

The valves‘ technical design is based 60

49,2
on media and application requirements.
50
This can lead to deviations from the general
specifications shown on the data sheet with 37,1
40
regards to the design, sealing materials and
characteristics. 26,8
30
18,1
If order or application specifications are 20
incomplete or imprecise there exists a risk of 10,5
an incorrect technical design of the valve for 10 5,3
the required application. As a consequence,
the physical and / or chemical properties of
the materials or seals used, may not be sui- 0 10 20 30 40 50 60 70 80 90 100
table for the intended application.
opening in %

■ specifications not highlighted are standard

specifications highlighted in grey are optional

müller co-ax ag • Gottfried-Müller-Str. 1 • D-74670 Forchtenberg • Germany • fon +49(0)7947/828-0 • fax +49(0)7947/828-11 • Email info@co-ax.com
type QUADAX - lug type


 *K
-6
+ 

,

PD[& 
mounting plate F


$ 
% 

/  '
* dimensions for trim X only

size (mm) 50 65 80 100 125 150 200 250 300 350 400 450 500 600 700 750 800 900 1000
(inch) 2 2½ 3 4 5 6 8 10 12 14 16 18 20 24 28 30 32 36 40
pipe cl to mounting plate A 105 128 128 162 190 203 240 279 305 325 385 405 440 530 630 630 700 830 920
pipe cl to cover screws B 106 129 129 158 186 204 241 281 307 333 383 403 441 541 643 643 713 836 926
bare shaft length for direct mounting C 95 95 95 125 135 145 180 180 180 280 289 300 320 320 367 367 367 398 398
bare shaft length for adapter C 51 51 51 68 68 68 85 85 85 173 170 170 170 170 210 - - - -
flange diameter PN 10 D 165 200 200 230 250 295 352 405 455 515 565 615 670 780 895 970 1085 1115 1230
PN 16 D 165 200 200 230 250 295 352 405 455 515 590 640 725 845 910 970 1085 1125 1255
PN 25 D 165 200 200 230 270 295 352 425 485 550 620 680 725 845 960 1020 1085 1185 1320
PN 40 D 165 200 200 230 270 295 375 450 515 585 660 680 770 908 - - - - -
PN 63 D 180 215 215 250 295 345 415 470 530 600 670 - - - - - - - -
ANSI 150 D 165 190 190 230 - 280 352 405 485 550 590 640 700 815 927 984 1085 1168 1290
ANSI 300 D 165 210 210 254 - 320 380 445 515 585 660 710 770 908 1035 1092 1149 1270 1238
ANSI 600 D 165 210 210 275 - 355 420 508 560 605 685 745 815 940 1073 1130 1194 1315 1320
mounting plate (others on
F F07 F07 F07 F10 F12 F14 F16 F16 F16 F25 F30 F30 F35 F35 F40 F40 F40 F48 F48
F ISO 5211 request)
trim A 20 bar max. G - - - - - - - - 40 45 50 55 55 70 90 90 100 110 120
290 psi max. H - - - - - - - - 12 14 14 16 16 20 25 25 28 32 32
I - - - - - - - - 45 60 60 80 80 90 115 115 125 140 160
trim X (standard) 52 bar max. G 14 18 18 20 22 32 32 40 45 55 65 70 75 90 110 110 130 150 160
754 psi max. H 5 6 6 6 6 10 10 12 14 16 18 20 20 25 32 32 32 36 40
I 25 28 28 28 40 40 40 45 60 80 88 90 90 115 140 140 180 180 200
DIN 3202 K3 PN
L 43 64 64 64 70 76 89 114 114 127 140 152 152 178 229 241 241 241 300
10/16/25/40/63
API 609 ANSI 150 L 43 48 48 54 - 57 64 71 81 92 102 114 127 154 - - - - -
ANSI 300 L 43 48 48 54 - 59 73 83 92 117 133 149 159 181 - - - - -
ANSI 600 L 43 54 54 64 - 78 102 117 140 155 178 200 216 232 - - - - -
kv-value (m³/h) trim A Δp max. 20 bar - - - - - - - - 3837 5478 7944 10735 12921 20651 25473 32661 36123 47565 56131
trim X Δp max. 52 bar 38 118 118 258 418 654 1445 2451 3720 5120 7321 9986 12118 19253 23081 30015 33343 43215 51398
cv-value (gal/min) trim A Δp max. 290 psi - - - - - - - - 4462 6370 9237 12483 15024 24013 29620 37978 42003 55308 65269
trim X Δp max. 754 psi 44 137 137 300 486 760 1680 2850 4314 5953 8513 11612 14091 22387 26838 31702 38771 50250 59765
weight (standard) (ca. kg) 8 16 16 22 32 39 68 128 150 221 319 349 457 715 1017 1203 1336 1744 2467

müller co-ax shall retain the rights to these documents. Modifications to the documents are strictly prohibited.
Rights reserved to make technical alterations • Not responsible for printing errors • Detailled drawings can be obtained upon request