Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 18 views

    Exp 13

    Uploaded by

    Dhanush kumar
    The apparatus consists of a central heater sandwiched between composite wall slabs on both sides. The composite wall is made up of different materials - cast iron, mild steel, and wood plates. Thermocouples between the interfaces measure the temperature at the surface of each material. Experiments are conducted by supplying varying inputs of heat to the central heater and measuring the temperature rise across each material interface to determine the total thermal resistance and thermal conductivity of the composite wall structure.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Exp 13

    Uploaded by

    Dhanush kumar
    18 views5 pages
    The apparatus consists of a central heater sandwiched between composite wall slabs on both sides. The composite wall is made up of different materials - cast iron, mild steel, and wood plates. Thermocouples between the interfaces measure the temperature at the surface of each material. Experiments are conducted by supplying varying inputs of heat to the central heater and measuring the temperature rise across each material interface to determine the total thermal resistance and thermal conductivity of the composite wall structure.

    Original Title

    exp13

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The apparatus consists of a central heater sandwiched between composite wall slabs on both sides. The composite wall is made up of different materials - cast iron, mild steel, and wood plates. Thermocouples between the interfaces measure the temperature at the surface of each material. Experiments are conducted by supplying varying inputs of heat to the central heater and measuring the temperature rise across each material interface to determine the total thermal resistance and thermal conductivity of the composite wall structure.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    18 views5 pages

    Exp 13

    Uploaded by

    Dhanush kumar
    The apparatus consists of a central heater sandwiched between composite wall slabs on both sides. The composite wall is made up of different materials - cast iron, mild steel, and wood plates. Thermocouples between the interfaces measure the temperature at the surface of each material. Experiments are conducted by supplying varying inputs of heat to the central heater and measuring the temperature rise across each material interface to determine the total thermal resistance and thermal conductivity of the composite wall structure.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 5

    NSFER LAB

    HEAT TRANSFER THROUGH


    COMPOSITE WALLAPPARATUS
    T T8

    PRESS WOOD

    ILAM SHT

    CAST JRON

    HEATER
    MS PLATE

    T2 T4 T6 T8

    Micro Mech Instruments, ch-97 Ex no:10


    HEAT TRANSFER LAB
    MM-HT-001B

    THEORY
    sandwiched between two sheets.Three
    The apparatusconsists of a central heater
    slabs are provided both sides of heater, which forms a composite structure. A
    types of ensure the perfect contact between the slabs. A
    Smal hand press frame is provided to
    is provided for varying the input to the heater and measurement of input
    dimmer-stat Thermocouples are embedded between
    is carried out by a voltmeter, ammeter.
    surface. The experiments can be
    interfaces of the slabs, to read the temperature at the made accordingly.
    conducted at various values of input and calculation can be

    SPECIFICATIONS

    1. Slab assemblyarranged symmetrically on both sides of heater.


    Round heater 150mm Diameter mica insulation with
    control unit
    2. Heater:
    capacity 400watt maximum.
    3.Dimmer-stat: 0-230V,0-2Amps, Single phase
    4. Voltmeter 0-300 V. Ammeter 0-2Amps.
    5.Temperature Indicator (K-type, 8channel):0-1200°C.
    MMI-HT-0018
    EXPERIMENT

    andthermal conductivity of composite


    AIM determine total thermal re~istance
    1. To
    Wall.
    temperature gradient along
    composite wall structure.
    plot
    2. To REQUIRED
    APPARATUS
    No
    Composite WallApparatus - 1
    º
    SPECIMEN USED

    a) Set up-2 diameter)


    Cast iron Plate(20mm thickness,150mmdiameter)
    Ailam sheet(10mm thickness, 150mm
    Press wood (12nm thickness, 150nnm diameter)
    FORMULA USED
    calculating the thermal
    Readthe Heat supplied Q= VxIWatts (In S. IL Units) For diameter of the plates,
    conductivity of composite walls, it is assumed that due to largee. axial flow. Thus for
    i.
    heat fiowing through central portion is unidirectional
    unidirectional flow is assumed is
    cakculation, central half diameter area where
    considered. Accordingly, thermocouples are fixed at close to center of the plates.
    Now q= Heat flux =Q/A {W/ m2]
    Where A =n/4x d2 half dia. of plates. d = 75 mm
    1.Total thermal resistance of composite slab
    R total = (TA - To)/4
    2. Thermai conductivity of composite slab.
    Kcomposite = q x b/ (TA - Tp)
    b= Total thickness of composite slab.
    3. To piot thickness of slab materia! against temperature gradient.
    Where,
    Q=Heat Supplird
    y= Heat Flux
    A= Area of tiie
    conposite plate
    R= Thermal Resistance
    K= Thermal Conductivity
    b= Total Thickness of
    composite Siab
    T1,T2 = Heater Plate Temp.
    T3,T4 =Mild Steel Plate Temp.
    MMI-HT-0018

    Plate Temp.
    T5,T6 - SMC Plate Temp.
    T7,18 = Wood ofStartingSide
    Temp
    TA = Avg. Temp of Ending Side
    TD- Avg.

    PROCEDURE
    proper Heater plates.
    fashion (symmetrical) on both sides of the Heater plates.
    Arrangethe plates in arranged on both sides of the
    1.See thatplates are symmetrically
    heater plates. properly to ensure perfect contact between
    hand press
    2 Operate the
    the plates. achieve steady environmental
    3Close the box by cover sheet to
    conditions.
    the dimmer-stat; adjust the
    4. Start the supply of heater by varying
    value.
    input at the desired an interval of 10minutes
    5. Take readingsof ali the thermocouples at rise is negligible.
    until fairlysteady temperatures areachieved and rate of
    observationtable.
    6. Note down the reading in

    TABULATION
    MMFHT-001B HEAT TRANSFER LAB

    Cast 2bn
    Fiber
    Heater MS Plate Wooden
    Plate
    Ammeter
    PlateTemp. Temp. Temp. Plate
    Voltmeter (°C) (C) (C) Temp. (C)
    SI.No Reading Reading
    (Volts) (Amps)

    T1 T2 T3 T4 T5 T6 T7 T8

    RESULT

    Total Thermal resistance to found out to be

    You might also like