Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd
Upload
46 views

Chapter 1

This document discusses the field of metrology, which is the science of measurement. It defines metrology and outlines some key aspects, including the need to establish measurement standards and ensure accuracy. It describes different types of measurements, measurement tools, properties of measuring instruments, sources of error, and methods of measurement classification. The overall purpose of metrology is to allow for precise and consistent measurement across applications.

Uploaded by

Rahat Bhuiyan
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
46 views

Chapter 1

This document discusses the field of metrology, which is the science of measurement. It defines metrology and outlines some key aspects, including the need to establish measurement standards and ensure accuracy. It describes different types of measurements, measurement tools, properties of measuring instruments, sources of error, and methods of measurement classification. The overall purpose of metrology is to allow for precise and consistent measurement across applications.

Uploaded by

Rahat Bhuiyan
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 22

IPE 3703

Introduction to Metrology
What is Metrology?
o Derived from Greek word for measure- “Metron”
o Science that deals with any kind of measurement
o Required accuracy at minimum cost
o It is concerned with 5 issues which are-

 Establishing units
 Reproducing units in form of standard
 Ensuring Uniformity
 Method development for measurement
 Analyzing accuracy
 Establishing uncertainty, finding the errors
Need for Measurement
1. To ensure that the part to be measured conforms
to the established standard.
2. To meet the interchange ability of manufacture.
3. To provide customer satisfaction by ensuring that
no faulty product reaches the customers.
4. To coordinate the functions of quality control,
production, procurement & other departments of
the organization.
5. To judge the possibility of making some of the
defective parts acceptable after minor repair.
Measuring Means

The means of measurements could be classified as


follows:
o Standards (Reference)- Used to reproduce one or
several definite values of a given quantity.
o Fixed gauges- Used to check the dimensions,
form, and position of product features.
o Measuring instruments- Used to determine the
values of the measured quantity.
Physical Measurement

There are three important elements of a physical


measurement,
o Measurand, i.e. the physical quantity or property
like length, angle etc. being measured.
o Comparison or comparator, i.e. the means of
comparing measurand with some reference to
render a judgment.
o Reference, i.e. the physical quantity or property
to which quantitative comparisons are made.
Physical Measurement
Nominal size (Basic Size): It is the size on which the limits
of size are based and which is assigned to a part in
accordance with its function.
True size: It is the theoretical size of a dimension, which is
free from any errors of measurement.
Actual Size: It is the value of size obtained through
measurement with the permissible measuring error.
Exact size: It is the value of size obtained with the highest
metrological accuracy attainable in practice.
Approximate Size: It is the value of size obtained with an
error exceeding the permissible error of measurement
and requiring refinement.
Properties of Measuring Instruments
o Measuring range- It is the range for which the error
obtained from a single measurement does not
exceed the maximum permissible error.
o Sensitivity- It is the quotient of the increase in observed
variable along with the increase of the measured
quantity.
o Scale Interval- Difference between two successive
scale marks. It indicates the ability of the instruments to
give accurate value of measured quantity.
o Hysteresis- It is the difference when same value of
measured quantity is reached by increasing or by
decreasing the quantity. Results due to dry friction and
properties of plastic element.
Properties of Measuring Instruments
o Response Time- It is the time after a sudden change in
measured quantity occur and the instrument show the
change.

 First order response of instrument

 Second order response system


Properties of Measuring Instruments
o Repeatability- It is the ability of the measuring
instrument to give the same value every time the
measurement of a given quantity is repeated.
o Bias- If average of measured quantity differs from
the true value of that quantity, it is called bias.
Sources of bias are maladjustment of the
instrument, permanent set, non-linearly errors,
errors of material measures etc.
o Inaccuracy- It is the total error of a measure or
measuring instrument under specified conditions
of use and including bias and repeatability errors.
Precision & Accuracy
Precision: Repeatability of a measuring process
Accuracy: Difference between actual and
measured quantity
Accuracy & Cost
SWIPE

Standard: Thermal expansion, Stability


with time, position of use
Work piece: Cleanliness, surface
condition, elastic property
Instrument: Hysteresis, backlash, Cost
experience
Personal: Handling skills, experience
Environment: Sunlight, noise, Accuracy
temperature, humidity
Calibration

o Calibration is a process of comparison between


measurements - one of known magnitude or
correctness made or set with one device and
another measurement made in as similar a way
as possible with a second device.
o The device with the known or assigned
correctness is called the standard. The second
device is the unit under test (UUT), test instrument
(TI), or any of several other names for the device
being calibrated.
Classification of Methods of
Measurement
o Direct Method
In this method, the quantity to be measured is
directly compared with the primary or secondary
standard. Scales, vernier callipers, micrometers,
bevel protractors, etc., are used in the direct
method
o Indirect Method
In this method, the value of a quantity is obtained
by measuring other quantities that are functionally
related to the required value. Measurement of the
quantity is carried out directly and then the value is
determined by using a mathematical relationship.
Classification of Methods
of Measurement
o Comparison Method
In this method, as the name suggests, the quantity to be
measured is compared with the known value of the same
quantity or any other quantity practically related
to it. The quantity is compared with the master gauge and only
the deviations from the master gauge are recorded after
comparison. The most common examples are comparators, dial
indicators, etc.

o Substitution Method
It is a direct comparison method. This method involves the
replacement of the value of the quantity to be measured with a
known value of the same quantity, so selected that the effects
produced in the indicating device by these two values are the
same. The Borda method of determining mass is an example of
this method.
Classification of Methods
of Measurement
o Interpolation Method
In this method, the given quantity is compared with
two or more known value of near about same value
ensuring at least one smaller and one bigger than the
quantity to be measured and the readings
interpolated
o Extrapolation Method
In this method, the given quantity is compared with
two or more known smaller values and extrapolating
the reading
Classification of Methods
of Measurement
o Contact Method
In this method, the surface to be measured is touched by
the sensor or measuring tip of the instrument. Care needs
to be taken to provide constant contact pressure
in order to avoid errors due to excess constant pressure.
Examples of this method include measurements using
micrometer, vernier calliper, and dial indicator.
o Contactless Method
As the name indicates, there is no direct contact with the
surface to be measured. Examples of this method include
the use of optical instruments, tool maker’s microscope,
and profile projector.
Classification of Measuring Instruments
o According to functions

 Length Measuring Instruments


 Angle Measuring Instruments
 Geometrical Form Deviation Checker
 Surface Finish Quality Checker

o According to the accuracy

 Most Accurate, e.g. Light Interference


 Medium Accuracy, e.g. Tool room microscope
 Less Accuracy, e.g. Vernier Calipers
Sources of Errors
Measurement error is the difference between the
indicated and actual values of the measurand.

During measurement several types of errors may arise


such as
1. Static errors
2. Instrument loading errors or dynamic errors

These errors can be broadly classified into two categories


a. Controllable errors
b. Random errors
Sources of Errors
Static errors: It results from the intrinsic imperfections or
limitations in the hardware and apparatus compared to ideal
instruments.
Static errors stem from three basic sources :
Reading error: Parallax, interpolation, optical resolution
(readability or output resolution)
Characteristic error: It is the deviation of the output of the
measuring system under constant environmental conditions
from the theoretically predicted performance. If the
theoretical output is a straight line, then linearity, hysteresis,
repeatability, and resolution errors are part of the
characteristic error.
Environmental error: Result from effect of surrounding
temperature, pressure and humidity on measuring system.
Sources of Errors

Dynamic errors: These are caused by time variations


in the measurand and results from the inability of a
measuring system to respond faithfully to a time-
varying measurand.

Usually the dynamic response is limited by inertia,


damping, friction or other physical constraints in the
sensing or readout or display system.
Sources of Errors
Systematic or Controllable errors:
Systematic error is just a euphemism for
experimental mistakes. These are controllable in
both their magnitude and sense. These can be
determined and reduced.
Random error:
These occur randomly and the specific cases of
such errors cannot be determined, but likely sources
of this type of errors are small variations in the
position of setting standard and work piece, slight
displacement of lever joints in the measuring
instrument etc.
Thank you for your
attention

You might also like