Mtech Syllabus 2017-18

SCHEME & SYLLABI
OF
M.TECH
MANUFACTURING TECHNOLOGY &
AUTOMATION
w.e.f. 2017 -2018
DEPARTMENT OF MECHANICAL ENGINEERING
Y.M.C.A. UNIVERSITY OF SCIENCE AND

TECHNOLOGY FARIDABAD-121006
VISION
“YMCA University of Science and Technology aspires to be a nationally and

internationally acclaimed leader in technical and higher education in all spheres which
transforms the life of students through integration of teaching, research and character
building.”
MISSION
 To contribute to the development of science and technology by synthesizing teaching,

research and creative activities.
 To provide an enviable research environment and state-of-the-art technological
exposure to its scholars.
 To develop human potential to its fullest extent and make them emerge as world class
leaders in their professions and enthuse them towards their social responsibilities.
Department of Mechanical Engineering
VISION
To be a centre of excellence by producing high caliber, competent and self reliant
mechanical engineers, who possess scientific temperament and would engage in
activities relevant to industries with ethical values and flair to research.
MISSION
 To provide efficient engineers for global requirements by imparting quality
education.
 To explore, create and develop innovations in various aspects of engineering
through industries and institutions.
 To emphasize on practical skills and socially relevant technology.
About the Program of Mechanical Engineering Department
YMCA University of Science & Technology, Faridabad established in 2009, formerly known as YMCA
Institute of Engineering, Faridabad, established in year 1969 as a Joint Venture of Govt. of Haryana and
National Council of YMCA of India with active assistance from overseas agencies of West Germany to
produce highly practical oriented personnel in specialized field of engineering to meet specific technical
manpower requirement of industries. Mechanical Engineering Department started in 1969 and has been
conducting B.Tech. Course in Mechanical Engineering of 4-Years duration since 1997. Students are
admitted through centralized counseling nominated by state govt. in 1st Year and 2nd year through lateral
entry entrance test. Besides under graduate degree courses, it is also running M.Tech. Mech. Engg.
Course (in specialization of Manufacturing Technology and Automation) and Ph.D. All courses are duly
approved by AICTE/ UGC. The Mechanical Engineering Department has been well known for its track
record of employment of the pass out students since its inception.
The Department has four storey building with 08 class rooms , 14 laboratory, 03 Workshop , 12 Offices,
Seminar Hall and Conference Hall. It has established Centre of Excellence with Danfoss Industries (P)
Ltd in the area of Climate and Energy. It has excellent faculty with 10 Professors, 04 Associate
Professors and 16 Assistant Professor. At present, 21 faculty members are PhD in various specializations.
The various syllabi of UG/PG courses in Mechanical Engineering Department, has been prepared with
active participation from Industry. The Department is organizing number of expert lectures from industry
experts for students in every semester. Seven month training is mandatory for every B.Tech. student.
Emphasis has been given on project work and workshop for skill enhancement of students. Choice based
credit system allows students to study the subjects of his/her choice from a number of elective courses
/audit courses.
With regards,
Chairman (ME)
Programme Educational Objectives (PEOs) (Mechanical Engineering: Manufacturing
Technology and Automation):
PEO-1:
Post Graduates will have fundamental technical knowledge and develop analytical skills required
for mechanical engineering (manufacturing technology and automation).
PEO-2:
Post Graduates to focus on practical skills and capable of using software and developing program
related to core and applied areas of their discipline to expand their knowledge horizon beyond
books and to equip them with experimental and industrial practices.
PEO-3:
Post Graduates will have improved team building, team working and leadership skills with high
regard for ethical values and social responsivities.
PEO-4:
Post Graduates will create and develop innovations in various aspects of mechanical engineering.
PROGRAMME OUTCOMES (PO) Mechanical Engg. (Mfg. Tech. & Automation)
Engineering programs have been designed to prepare M.Tech. Students for attaining the
following program outcomes (PO):
1. an ability to apply knowledge of manufacturing technology and automation in practice

for solving complex engineering problems
2. an ability to identify, critically analyze, formulate and solve manufacturing technology
and automation problems
3 use research based knowledge and research methods including design of experiments,
analysis and interpretation of data, and synthesis of the information to provide valid
conclusions in mechanical engineering
4 an ability to automate a mechanical system and process to meet desired needs within
realistic constraints such as health, safety, security and manufacturability
5 an ability to do innovation and incorporation of new research with usage of the
techniques, IT skills, and modern engineering tools for various changes in manufacturing
engineering practice
6 apply reasoning informed by the contextual knowledge to assess societal, health, safety,
legal and cultural issues and the consequent responsibilities
7 an ability to understand the impact of mechanical engineering solutions in a
contemporary, global, economic, environmental and societal context for sustainable
development
8 apply ethical principles and commit to professional ethics and responsibilities and norms
of the mechanical engineering practice
9 function affectively as an individual, and as a member or leader in diverse teams
10 an ability to communicate effectively as an individual or as a team leader in
manufacturing activities.
11 ability to engage in independent research and lifelong learning in the broadest contest of
technological changes in manufacturing technology and automation.
12 an ability to appreciate the importance of goal setting and to recognize the need for life-
long reflective learning in mechanical engineering.
PROGRAM SPECIFICOUTCOMES (PSO):
[1] an ability to apply knowledge and skill of various approaches in manufacturing

technology and automation, for solving complex engineering problems.
[2] use research based knowledge and research methods including design of experiments,
analysis and interpretation of data and IT tools.
[3] an ability to automate a mechanical system or a process to meet desired needs within
realistic constraints such as health, safety and manufacturability.
M. Tech (Manufacturing Technology & Automation)
Scheme w.e.f. 2016- 2017
The credit requirements of the course are
Max. Marks : 2450
Labs : 07
Total Credits : 78
Course Type : No. of courses

Programme Core Courses (PCC) : 11
Discipline Specific Elective Courses (DSE) : 02
Mandatory Audit Courses (MAC) : 01
Ability Enhancement Compulsory Courses (AECC) : 01
Skill Enhancement Courses (SEC) : 02
General elective Courses (GEC) : 01
Massive Open Online Courses (MOOCS) : 01
Note: MOOCS course will be opted by students at any time during II to III semester of
their M. Tech programme.
First Semester:
Subject Code Subject Name L-T-P Credi Marks Category
ts Weightage Code
Internal External
MMA-601-A Foundry 4-0-0 4 25 75 PCC
Technology
MMA-603-A Welding & Allied 4-0-0 4 25 75 PCC
Process
MMA-605-A Mechatronics 4-0-0 4 25 75 PCC

Product Design
MMA-607-A Design Planning & 4-0-0 4 25 75 PCC

Control of
Production
Systems
MMA-609-A Cyber Security 2-0-0 2 25 75 PCC
MMA-611-A Welding lab 0-0-2 1 15 35 PCC
MMA-613-A Mechatronics Lab 0-0-2 1 15 35 PCC

Total 18-0-4 20 155 445
Second Semester:
Subject Subject Name L-T-P Credits Marks Category Code

Code Weightage
Internal External
MMA-602-A Metal Cutting 4-0-0 4 25 75 PCC
Technology
MMA-604-A Automation in 4-0-0 4 25 75 PCC
Manufacturing
MMA-606-A CAD/CAM 4-0-0 4 25 75 PCC
MMA-608-A Discipline Specific 4-0-0 4 25 75 DSE
Elective Course*
MMA-610-A Mfg./ Metal cutting 0-0-2 1 15 35 PCC
Lab
MMA-612-A Automation Lab 0-0-2 1 15 35 PCC
MMA-614-A CAD/CAM Lab 0-0-2 1 15 35 PCC
AUD Mandatory Audit 2-0-0 - - - MAC
Course*
Total 18-0-6 19 145 405
Third Semester:
Subject Subject Name L-T-P Credits Marks Category

Code Weightage Code
Internal External
MMA-701-A Computer Integrated 4-0-0 4 25 75 PCC
Mfg.
MMA-703-A Material Management 4-0-0 4 25 75 PCC
MMA-705-A Discipline Specific 4-0-0 4 25 75 DSE
Elective Course –II*
MMA-707-A Project Management 4-0-0 4 25 75 PCC
MMA-709-A Presentation Skill 0-0-2 1 15 35 AECC
Development
MMA-711-A Project 0-0-12 6 60 140 SEC
MMA-713-A CIM Lab 0-0-2 1 15 35 PCC
GEC General elective 3-0-0 3 25 75 GEC
Course*
Total 19-0-16 27 215 585
Fourth Semester:
Subject Code Subject Name L-T-P Credits Marks Category

Weightage Code
Internal External
MMA-702-A Dissertation 0-0-24 12 150 350 SEC
Total 0-0-24 12 150 350
*The student will have to select one subject from list of Discipline Specific Elective
Courses, general elective courses and mandatory audit courses.
List of Electives:
Discipline Specific Elective Course -I
MMA-608-A-1 Industrial Inspection
MMA-608-A-2 Quality control techniques
MMA-608-A-3 Design & Metallurgy of welded joints
MMA-608-A-4 Robotics Engg.
MMA-608-A-5 Machine Tool Dynamics
MMA-608-A-6 Finite Element Methods
MMA-608-A-7 Principle of Management
MMA 608 -A-8 Supply Chain Management
Discipline Elective Course – II
MMA-705-A-1 Artificial Intelligence
MMA-705-A-2 Value Engg.
MMA-705-A-3 Advanced Theory of Vibrations
MMA-705-A-4 Total Quality Mgmt.
MMA-705-A-5 Metal Forming Analysis
MMA-705-A-6 Mechanical Behavior of Materials
General elective Course
Courses offered by Computer Engg. Dept

S.No Code Name of Subject
1 GEC-1 Intelligent Systems
2 GEC-2 Cyber laws and Security
3 GEC-3 Soft Computing
4 GEC-4 Web Technology and Information Retrieval
5 GEC-5 Intellectual Property and Rights
Courses offered by Electrical Engg. Dept

1 GEC-6 Installation Testing & Maintenance of Electrical
Equipments
2 GEC-7 Non conventional energy resources & Utilization
3 GEC-8 Utilization of Electrical Power & Traction
 Courses offered by Electronics Engg. Deptt.
1 GEC-15 Microprocessor and Interfacing
2 GEC-16 Digital Signal Processing
3 GEC-17 Instrumentation and Control
4 GEC-18 Data Communication and Networking
 Courses offered by HAS Dept

1 GEC-19 Soft Skills for Engineers
2 GEC-20 Maths-III
 Courses offered by MBA Dept

1 GEC-21 Human Resource Management
2 GEC-22 Financial Management
3 GEC-23 Marketing Management
4 GEC-24 Entrepreneur Development
5 GEC-25 Principles of Management & Economics
Mandatory Audit Courses (MAC)
Subject Code
 German -1 AUD-01
 German-2 (with German-1 as prerequisite) AUD-02
 French -1 AUD-03
 French-2 (with French-1 as prerequisite) AUD-04
 Sanskrit -1 AUD-05
 Sanskrit-2 (with Sanskrit-1 as prerequisite) AUD-06
 Personality Development AUD-07
 Interview and Group Discussion Skills AUD-08
 Yoga and Meditation AUD-09
 Art of Living/ Life Skills AUD-10
 Contribution of NSS towards Nation/Role of NSS AUD-11
 Physical Education AUD-12
Grading Scheme (w.e.f. July 2016 onwards)
Marks % Grade Grade points Category

90-100 O 10 Outstanding
80≤marks<90 A+ 9 Excellent
70≤marks< 80 A 8 Very good
60≤marks< 70 B+ 7 Good
50≤marks< 60 B 6 Above average
45≤marks< 50 C 5 Average
40≤marks< 45 P 4 Pass
<40 F 0 Fail
………………… Ab 0 Absent
Percentage calculation= CGPA * 9.5

MMA-601-A: FOUNDRY TECHNOLOGY
No. of Credits: 4 Sessional: 25 Marks
L T P Total Theory : 75 Marks
400 4 Total : 100 Marks
Duration of Exam: 3 Hours
Course Objectives:
To study the basic concepts regarding design and manufacture of a component by various
casting methods. To provide knowledge to the students, on the principles that guides
production of sound engineering castings.
Syllabus:
UNIT 1. Introduction to Foundry Technology, Items (Domestic and Engg.) made by
foundry technology, Advantage and limitations of foundry technology over the other
manufacturing processes
UNIT 2. Castability and factors affecting castability.Ferrous and Non-ferrous
casting metals & their alloys and items made of them.Melting furnaces for cast iron,
cast steels, aluminium and its alloys, brass and bronze.Pattern: Pattern material, Types
of patterns, Pattern allowances, Colour coding system for patterns, Numerical on
pattern allowances.
UNIT 3. Moulding: Mould material, properties of moulding sand, Main constituents
of moulding sand, Classification of moulding sand, Preparation of moulding sand,
Testing of moulding sand, Methods of moulding.
UNIT 4. Core: Introduction, Characteristics of core, Types of core, Core making,
Core chaplets, Core print, Core boxes.
UNIT 5. Gating system: Requirements of gating system, elements of gating system,
Types of gates, Types of risers, Design and positioning of risers, Calculation of
pouring time and solidification time, Casting design considerations,
Chills.Solidification of castings.
UNIT 6. Special casting methods: Gravity die casting, Cold chamber die casting,
Hot chamber die casting, Investment casting, Centrifugal casting, Shell mould casting,
Continuous casting
UNIT 7. Casting defects, their causes and remedies, Fettling of castings,Casting
inspection, repair and salvage of castings.Heat treatment of castings, Quality control
of castings, Pollution control in foundry, modernisation of foundry.
Course Outcomes (CO’S): At the end of the course, the student shall be able to:
 Design of pattern for a particular component to be manufactured

 Understand the basic composition of various ferrous and non-ferrous metals and
their application in casting process
 Choose the appropriate furnace for the production of a particular material
 Design of gating system for a particular component
 Analyse adequate casting method based on quantity, application, mechanical
properties and tolerances
 Identify casting defects, understand reasons and recommend remedial measures
Reference Books:
1. Principles of Metal Casting - Richard W. Heine , Carl R. Hoper, Philip C. Rosenthal, Tata
McGraw Hill Education
2. Principles of Foundry Technology - P. L. Jain, Tata McGraw-Hill Education
3. Foundry practice - W.H. Salmon and E.N. Simons, Pitman
4. Principles of manufacturing materials and processes - J. S. Campbell, McGraw Hill
5. Materials and processes in manufacturing - E. Paul DeGarmo, J. T. Black, Ronald A.
Kohser, John Wiley & Sons
6. A Textbook of Production Technology: Manufacturing Processes - P. C. Sharma, S. Chand
publications
NPTEL Video Lecture , Metal Casting ,Web: http://nptel.ac.in/
MMA-603-A: WELDING AND ALLIED PROCESS

Course Objectives:
To study essential concepts for welding parameters and welding processes. To study various
techniques for metal spraying and thermal cutting processes. To study various techniques of
welding automation.
Syllabus:
Unit 1: Introduction: Review of welding processes like gas, arc and resistance welding. Weld
bead geometry and shape factors, Weld dilution.
Unit 2: Welding Power Sources: Types of power sources, External V-I characteristics for
constant current and constant voltage power sources, Rectifiers, Solid-state Rectifiers,
Inverter systems, Duty cycle.
Unit 3: Arc Welding Consumables and Metal Transfer: Types of electrodes, AWS and Indian
system of classification and coding of covered electrode for mild steel, Shielding gases
and associated mixtures. Types of metal transfer, Short circuit/ dip transfer, Free flight,
Globular type, Spray type, Forces affecting metal transfer.
Unit 4: Arc welding processes: Electric arc welding principle, MIG: welding equipment and
processes, shielding gas, types of metal transfer. Tungsten inert gas arc welding
(GTAW): welding equipment, electrodes, inert gases and torches. Submerged arc
welding (SAW): principle of processes, applications, fluxes and welding electrodes
used. CO2 welding: Difference from MIG welding, Principle of operation, equipment,
welding parameters and applications.
Unit 5: Other advanced welding processes: Introduction, main features and applications of
Ultrasonic welding, Friction welding, Explosive welding and Friction Stir welding,
Introduction, methods and applications of Underwater Welding.
Unit 6: Weldability of specific Materials: Welding of plastics: Difficulties in welding of
Plastics, Processes for welding of Plastics. Welding of Stainless Steel, Aluminum and
Cast Iron.
Unit 7: Welding Allied Processes: Surfacing and metal spraying: Surfacing methods such as
SMAW, MIG, TIG, SAW. Thermal spraying: Introduction, Procedures, Applications,
Advantages and Disadvantages. Thermal cutting of metals: Introduction, types, principle
and operation of flame and plasma cutting.
Unit 8: Automation in Welding: Introduction, Semiautomatic welding, Automatic welding,
Welding mechanization, Flexible Automated Welding, Robotic welding, Types of
Welding Robots, Robot Selection Mechanics, Joint tracking system.
Course Outcomes (CO’s): At the end of the course, the student shall be able to:
 Understand principles of various traditional and newer welding processes
 Develop concept of welding specific materials such as plastics, stainless steel.
 Develop concept and techniques of welding automation.
 Analyze methods of advanced welding processes like underwater welding.
 Analyze arc welding parameter section and types of metal transfer.
 Understand concept of thermal spraying and thermal cutting of metals.
Reference books:
1. Modern Welding Technology: by Howard B. Cary and Scott C. Helzer, (Pearson

Education)
2. Welding and Welding Technology: by R. Little (TMH)
3. Welding Processes and Technology: by R. S. Parmar (Khanna Publishers)
4. AWS- Welding Handbook.
NPTEL Video Lecture ,Web: http://nptel.ac.in, Welding Distortion

MMA-605-A : MECHATRONICS PRODUCT DESIGN
Course Objectives:
To study essential concepts of a system model in a mechanical system. To study interfacing

of various hardware in mechatronics product design. To incorporate application of
electronics and computer engineering in mechanical engineering for enhancing product
design values.
Syllabus:
UNIT 1. Introduction to Mechatronics systems and components, Principles of basic
electronics – Digital logic, number system logic gates, Sequence logic flip flop system,
JK flip flop, D-flip flop.
UNIT 2. Microprocessors and their applications – Microcomputer computer
structure/microcontrollers, Integrated circuits – signal conditioning processes. Various
types of amplifiers . Low pass and high pass filters.
UNIT 3. Sensors –sensors and transducers. Displacement, position proximity sensors ,
velocity, force sensors. Fluid presence Temperature, Liquid level and Llight sensors.
Selection of sensors, Actuators: Pneumatic and hydraulic systems, Mechanical actuation
system, Electrical actuation system. Other Electrical/Electronic hardware in Mechatronics
system.
UNIT 4. Principles of Electronic system communication, Signal conditioning, Interfacing,
A.D. and D.A. convertors, Software and hardware principles and tools to build
mechatronic systems, Basic system models, Mathematical models, Mechanical and other
system building blocks.
UNIT 5. System models – Engg. Systems, Rotational-translation, Electro- mechanical,
Hydraulic- mechanical system, System Transfer functions, First-second order system in
series.
UNIT 6. Design and selection of Mechatronics components namely sensors line encoders
and resolvers, stepper and servomotors, ball screws, solenoids, line actuators and
controllers with application to CNC system. PLC and Ladder programming, Robots,
Consumer electronics products, etc. Design of a Mechatronic Products using available
software CAD packages MATLAB and SIMULINK.
 Understand conceptual design for mechatronics products based on potential
custom requirements.
 Analyze appropriate sensors and transducers and devise an instrumentation
system
 Understand design of a control system for effective functioning of mechatronics
systems using digit electronics, microprocessors, microcontrollers and PLC.
 Develop system model for mechanical system.
 Calculate transfer function for first order and second order system.
 Understand analogue to digital conversion and digital to analogue conversion.
Reference books:
1. Mechatronics by W.Bolton, published by Pearson Education, 4 th Ed.
2. Automation Production System and CIMS by Mikel P Groover, Prentice Hall of India
New Delhi.
NPTEL Video Lecture , Web: http://nptel.ac.in, Mechatronics Engineering

Software available: Control-X supplied by Cyber Tech.
MMA-607-A: DESIGN, PLANNING AND CONTROL OF PRODUCTION SYSTEMS

COURSE OBJECTIVE:
To study life cycle approach both for production system and new product development &
compare production system with service system. Clarify various MRP models in production
planning & sequencing and scheduling of the job on the machines. To study the concept of
forecasting in production system.
Syllabus:
Unit 1. Introduction to production systems: Aim of production system, generalized model of
Production systems, Types and characteristics of production and service systems, Life cycle
approach to production management. Case studies of production and service systems.
Unit 2. Product development and design: Product life cycle, New product development and
process selection, stages in new product development, use of decision tree, Breakeven Analysis,
Make/buy decision, Problems for Break even Analysis Non-linearity in B.E. Analysis, selection
of location among alternatives –A case study, systematic layout planning, objectives, types,
comparison and application of different types of layouts. Assembly line balancing concept and
problems for maximum line efficiency.
Unit 3. Planning for production: Importance, objectives and types of forecasting methods,
Analysis and comparison standard error of estimate, Material Requirement Planning (MRP)
objective, dependent demand, inputs to MRP, MRP-II, MRP model, ERP.
Unit 4. Sequencing and scheduling: Criteria for sequencing, priority sequencing and rules, n job
2 machine, n job 3 machine, n job m machine problems. Scheduling of flow shops and job shops.
Gantt chart.
Unit 5. Element of monitoring and follow up.
COURSE OUTCOMES: Towards the end of the course, the students should be able to:
 Develop life cycle approach to new product development and production

system.
• Develop the concept of break-even analysis, line balancing and relate it with
practical industrial work.
• Understand and generate MRP-I, MRP-II and ERP models for production and
enterprise resource planning.
• Estimating production requirement using various forecasting techniques.
• Understand the criteria for sequencing & accordingly schedule the job on machines.
Reference Books:
1. Modern Production / operations management 8th ed. - Buffa, Elwood and Sarin, Rakesh
(Wiley)
2. Elements of Production, planning and control - Eilon Samuel (Macmillan)
3. Production control: A quantitative approach - Biegel. J (Prentice Hall)
4. Industrial Engineering and production management – Martand Telsang (S. Chand)
5. Operations Management – Theory and Problems – Joseph Monks (Mcgraw Hill))
6. Production and Operations Management – Kanishka Bedi. (Oxford University Press)
7. Operations Management 2nd ed. – B. Mahadevan. (Pearson)
MMA – 609A CYBER SECURITY
L | T | P |Total Theory: 75 Marks
2 | 0 | 0 | 2 Total: 100 Marks
Course Objectives:
To study essential concepts for cyber security , cyber security applications, cyber crimes
unauthorized crimes and hacking. To study prohibited action on cyber policies,
evaluation of crime scene, evidence collection, Cyber security law and policies.
Syllabus:
Unit 1 Introduction: What is security? Need of security, Why is security so hard? Various
goals of security, Introduction to Cyber Security, Difference between Computer security,
Information security, Network security and Cyber security, Cyber security Applications
and Principles.
Unit 2 Introduction to Cyber Crimes: Category of Cyber Crimes, Technical Aspects of
Cyber Crimes: unauthorized access & Hacking, Trojan, Virus and worm attacks, E-mail
& IRC related crimes: Email spoofing and spamming, Email bombing: Sending
threatening emails, Defamatory emails, Email frauds, IRC related, Denial of service
(DoS) attacks, Distributed Denial of Service (DDoS) attacks, Cyber criminals and
objectives.
Unit 3 Prohibited Actions on Cyber: IPR Violations, Cyber Squatting, Cyber Terrorism,
Cyber Pornography, Forgery and fraud, Banking/Credit card related crimes, Sales and
Investment frauds, Defamation (Cyber smearing), Cyber Stacking.
Unit 4 Cyber Forensics and Cyber Security: Introduction to forensic tools, Evaluation of
crime scene and evidence collection, Cyber security law and policies, Policy foundation
for cyber security.
 Understand cyber security applications and principles.
 Analyse about cyber-crimes and Email frauds.
 Understand prohibited action on IPR violations, prevention of forgery and
card related crimes.
 Understanding cyber-crime criminals and cyber objectives.
 Understanding the forensic tool and evidence collection.
 Understand policy foundation for cyber security.
Reference Books
1. William Stalling, “Cryptography and Network Security”, 5th Edition. PHI New Delhi
2. William Stalling, “Network Security Essentials: Applications and Standards”, 4th Edition.
PHI New Delhi
3. Stuart McClure, “Hacking Exposed: Network Security Secrets & Solutions”, McGraw-Hill
4. Albert Marcella, Doug Menendez, “Cyber Forensics: A Field Manual for Collecting,
Examining, and Preserving Evidence of Computer Crimes”, Second Edition,
AUERBACH PUBLICATIONS, A CRC Press Company
MMA-611-A : WELDING LAB

0022 Total : 50 Marks
Course Objectives:
To develop domain knowledge in the field of welding and study of bead geometry , hardness
microstructure of welding bead for various types of welding processes.
List of Experiments in Welding
1. To study Heat flow in Welding

(Equipment for use-Gas Welding equipment)
2. To study Bead Geometry, Hardness of Bead, Microstructure of welding

Bead in case of:
i) MIG Welding
ii) SAW Welding
iii) FCAW Welding
(By changing electrode diameter & carriage speed)
3. To conduct under water welding ( to study bead shape & microstructure)
 Understand heat flow in gas welding.
 Analyse about bead geometry, hardness and microstructure of MIG,SAW
and FCAW welding.
 Understand underwater welding procedure .
MMA-613-A : MECHATRONICS LAB

Course Objectives:
To develop domain knowledge in the field of mechatronics product design and select various
equipments for mechatronics applications. To run a variety of mechanical equipments with the
help of computer.
List of experiments:
1. To verify truth table of various gates such as AND, OR, NOR, NOT, etc.
2 To realize a logic equation Y=AB+CD.
3 Selection of sensor for a particular application from Catalogue/Internet.
4 Design a mechatronics product/system and incorporate application of mechatronics for
enhancing product values
5 To study the hardwares and softwares of mechatronics kit.
6 To move a table in X-direction and Y-direction within the range of proximity sensors using
Control-X software.
7 To rotate a table using DAC system.
8 To run a motor with PLC.
9. To run a conveyor with computer.
10. To study the movement of actuating cylinders and sensors.
11 To study mechatronics and their interfacing in a CNC machine.
12. Life prediction from computer programme based on mathematical model.
 Understand the various practical demonstrations of mechatronics. 
 To utilize the theories for designing digital system. 
 Selection of equipments and practical demonstration. 
 Prepare computer programme based on mathematical model. 
MMA-602-A : METAL CUTTING TECHNOLOGY

Course Objectives:
To study essential concepts of metal cutting using single point and multipoint cutting tools.To
study concept and application of modern machining processes. To study milling, broaching,
gear cutting, grinding, thread cutting tools and tools for making holes.
Syllabus:
Tool Geometry, Tool & work piece material: Common work and Tool materials, Tool inserts,
Specifications of inserts and tool holders, Physical principle in metal cutting: Chip formation and
types of chips, work done in cutting, BUE on metal cutting, curling & contraction of chip , work
hardening, quality of machines surfaces, Effect of cutting fluid on cutting process, vibration in
metal cutting. Machining economics, cutting power, Tool wear, lubrication and surface finish,
cutting fluids.
Turning, Boring and threading tools: Operation, signature of single point tools, Design of single
point turning tool, ISO tool shapes, design of flat and circular form tools, threading tools chip
breaking methods.
Milling, Broaching, Gear cutting tools: Milling cutter design, design of broach, Gear shaping and
gear shaving operations, design of Gear hobs.
Tools for holes: Hole making operations-drilling, Reaming and boring, Designs of Drill, Reamer
and Boring tools.
Grinding: Features of grinding process, characteristics, shapes, mounting, wear, turning, Dress of
Abrasive tools, center type cylindrical grinding, centreless grinding, internal grinding, surface
grinding, grinding fluid
Modern machining Processes: USM, Abrasive Jet Machining, water jet machining,
electrochemical machining, grinding, deburring, Honing, EDM, plasma arc machining, Laser
Beam machining, Electro Beam machining Process detail, Metal cutting mechanics, application.
 Understand the effect of chip on quality of machine surface.

 Understand the design of broaching tools and gear hobs.
 Understand the design of single point and multipoint cutting tools.
 Analyze hole making processes such as reaming and drilling.
 Understand concept various grinding processes and applications.
 Understand concept of metal cutting mechanics.
Reference books:
1. Metal Cutting theory and cutting tool design:-v Arshinov Mir Publishers, Moscow,
Allekseev Mir Publishers, Moscow
2. Cutting tools: P.H. Joshi, Wheeler Publishing
3. Theory of Metal cutting: E.M. Trent
4. Tool design: Donaldson
5. Production Technology: HMT, Tata Mcgraw Hill, New Delhi
6. Modern Machining Processes: P.C. Pandey, H.S.Shah, Tata Mcgraw-Hill, New Delhi
MMA-604-A : AUTOMATION IN MANUFACTURING
Course Objectives:
To study various techniques of automatic material handling in a manufacturing organization. To
study concept and interfacing of various pneumatic, hydraulic and software for automation of
mechanical products /system. To study control strategies, modeling and simulation in a
manufacturing system.
Syllabus:
Introduction:
Automation in Production System, Principles and Strategies of Automation, Basic Elements of an
Automated System, Advanced Automation Functions, Levels of Automations, Introduction to
automation productivity.
Material Handling Systems:
Overview of Material Handling Systems- rotary feeders, oscillating force feeder, vibratory
feeder, elevator type and centrifugal type feeders, Principles and design consideration, Material
transport systems, Storage systems.
Automated Manufacturing Systems:
Components, Classification and Overview of Manufacturing Systems, Manufacturing Cells, GT
and Cellular Manufacturing, FMS, FMS and its Planning and Implementation, Flow lines &
Transfer Mechanisms, Fundamentals and Analysis of Transfer Lines, Product design for
automatic assembly.
Control Technologies in Automation:
Industrial Control Systems, Components,Process Industries Verses Discrete-Manufacturing
Industries, Continuous Verses Discrete ,Open and close loop control, PID Controller, Controller
tuning: Process reaction method and ultimate cycle method.
Evaluation of Automatic Production:
Product manufacturability, Orientation devices- active and passive devices, Parts orientation and
Escapement devices.
Pneumatic and Hydraulic Components and Circuits:
Boolean algebra, Pneumatic sensors and amplifiers, Jet destruction devices, Logic devices,
Schimit triggering devices, Developing pneumatic circuits for automatic die casting machine.
Modeling and Simulation for Manufacturing Plant Automation:
Introduction, need for system modeling, Building mathematical model of a manufacturing plant,
Modern Tools- Artificial neural networks in manufacturing automation, AI in manufacturing,
Fuzzy decision and control, Robots and application of robots for automation.
 Understand the effect of manufacturing automation strategies.
 Analyze automated flow lines and assembly systems, and balancing the line.
 Develop automated material handling and feeders for a typical production system.
 Design a flexible manufacturing system and control strategies.
 Understand various types of part orientation devices and escapement devices.
 Develop pneumatic systems and simulation for a manufacturing plant
automation.
Reference Books:
1. Handbook of Design, Manufacturing & Automation : R.C. Dorf, John Wiley and Sons.
2. Automation, Production Systems and Computer Integrated Manufacturing, M.P. Groover,
PHI.
3. Industrial Automation, W.P. David, John Wiley and Sons.
4. Computer Based Industrial Control, Krishna Kant, PHI
5. Anatomy of Automation, Amber G.H & P. S. Amber, Prentice Hall.
6. Performance Modeling of Automated Manufacturing Systems, Viswanandham, PHI
NPTEL Video Lecture , Web: http://nptel.ac.in, Automation and control
Software available: Pneumatic and hydraulic simulation , CyberTech
MMA-606-A: CAD/CAM
Course Objectives:
Explain principles of various theories of computer aided designing involved along with their
industrial applications. Study the design process of any product or operation and how CAD
improvises it by increasing the efficiency and accuracy of the process. Study the manual &
Computer aided part programming and the various methods for CAPP.
Syllabus:
CAD/CAM SYLLABUS
UNIT-1
Introduction of CAD/CAM,Co-ordinate system in CAD, 2D & 3D
Transformation:-Scaling, Rotation, Shearing, Translations & Reflection,
introduction of Part family and Group Technology.
UNIT-2
Representation of parametric and non-parametric curves, Types of curves (analytic
& synthetic curves), Geometric modeling, representation and types of surfaces.
UNIT-3
Introduction to FEM and FEA, Basic Concepts of FEM, Meshing, Element
Selection, Types of Analysis
UNIT-4
Introduction of CAPP & its type (variant, generative and hybrid CAPP), NC part
programming, APT programming, advances in CAD/CAM (Agile & Lean
manufacturing, concurrent Engineering and reverse engineering)
UNIT-5
Fundamentals of Rapid Prototyping, Benefits and Application, STL file
Generation,Rapid Tooling: Introduction to Rapid Tooling (RT), Conventional Tooling
vs. RT, Need for RT
RAPID PROTOTYPING MACHINES: Classification, Description of RP Machines:
Stereo lithography, Selective Laser Sintering, Fused deposition modeling, laminated
object manufacturing, Laser powder forming.
o Understand 2-D and 3-D transformations of different object based on

coordinate system and design the 2D and 3D surfaces and solids.
o Understand the various types of curves
o Develop a part program using CNC Part Programming.
o Analyze a part program using APT language.
o Understand the applications of various CAPP techniques /methods.
References Books:
1. CAD/CAM by Groover and Zimmer
2. CAD/CAM Theory and Practice, Ibrahim-Zeid, TATA McGraw Hill
3. CAD/CAM/CIM – P. Radhakrishnan, New age international.
4. Mathematical Elements of Computer graphics- Rogers and Adams
5. Computer Aided Design – Besant and Lui, PHI
NPTEL Video , Web: http://nptel.ac.in, Computer aided design and manufacturing
Software available: AutoCAD of Microsoft
Elective-I
MMA-608-A-1 : INDUSTRIAL INSPECTION

Course Objectives:
To study industrial process of inspection ,design consideration for gauges and measuring
instruments. To study Indian and international standards for limits ,fits, tolerances. To identify
geometrical and physical limitations in measuring devices. To study surface texture of
components.
Syllabus:
UNIT-1: Design consideration for Gauges and measuring instruments: material selection for
gauges, Nas per Indian and international standards, design of plug gauge, snap gauge, center
distance gauge.
UNIT 2:Inspection of threads and gears : thread gauge design, thread size measurement by two
wire and three wire methods, vernier gear tooth gauge design.
UNIT 3: Surface textures: components of machined surface texture, specification of surface

texture, surface roughness measuring device and techniques, design of pneumatic gauges in
process gauging methods.
UNIT 4:Geometrical and positional tolerances

UNIT 5: Geometrical and physical limitations in measuring devices.
 Understand about the types Gauges.
 Complete understanding about measurement standards.
 Understanding about the gears and threads.
 Understanding surface textures with processes
 Understand tolerances and their positioning with geometry.
References:
1. Metrology:- I .C. Gupta (Dhanpat Rai Pub.)

2. Engg. Metrology :- R. K. Rajput (S. K. Kataria and sons)
3. Metrology :- R. K. Jain
4. PSG design data book for Gauge design
MMA-608-A- 2 : QUALITY CONTROL TECHNIQUES
Course Objectives:
To study about statistical concepts in quality control, quality control techniques, various control
charts. Study about variables inspection and attributes inspection, relative merits and demerits.
To study about special control charts for variables, group control chart total quality control.
Syllabus:
UNIT 1:Statistical concepts in Quality Control, Graphical Representation of Grouped Data,
Continuous and Discrete Probability Distributions, control limit Theorem,
UNIT2: Introduction to Quality Control, process Control and Product Control, Chance and
Assignable causes of Quality variation, Advantages of shewhart control charts, Process Control
charts for variables, X, R and  charts, fixation of control limits, Type I and Type II Errors,
Theory of runs, Interpretation of Out of Control points, Probability limits, Initiation of control
charts, Trial control limits, Determination of aimed at value of Process Setting, Rational method
of sub grouping, control chart parameters, control limits and specification limits, Natural
tolerance limits, Relationship of a process in Control to upper and lower specification limits,
process capability studies.
UNIT3:Special control charts for variables, group control chart, arithmetic moving X and R
charts, Geometric moving chart, control chart with reject limits, steady trend in Process average
with constant dispersion, trend chart with sloping limits, variable subgroup size.
UNIT4: Variables inspection and Attributes inspection, Relative merits and demerits, Control
charts for Attributes, p chart and np chart, varying control limits, high defectives and low
defectives, special severe test limits, C chart, U chart, Dodge demerit chart, Quality rating,
CUSUM or Cumulative sum control chart, Average run length (ARL) Relative efficiency or
sensitivity of control chart.
UNIT5: Probability theory, binomial and Poisson distribution, Acceptance Inspection, 100%
Inspection, No Inspection and sampling Inspection, operating characteristic curve (O.C. curve).
Effect of sample size and Acceptance number, type A and type B O.C. curves, Single, Double
and Multiple sampling Plans, SS Plan. Acceptance/Rejection and Acceptance/Rectification Plans,
Producers Risk and Consumer’s Risk, Indifference Quality level, Average Outgoing quality
(AOQ) curve, AOQL, quality protection offered by a sampling Plan, Average sample Number
(ASN) curve, Average Total Inspection (ATI) curve.
 Understand about the Concept of Quality control system and process
capability study.
 Analyze about process control charts and Errors.
 Understand about the Inspection control methods.
 Understanding about the probability theory, binomial and Poisson
distribution .
 Analyze product control, chance and assignable causes of Quality variation .
Reference Books
1. Statistical Quality control by E.L. Grant
2. Quality control and Industrial Statistics, by A.J. Duncan
3. Quality control by Dale H. Bestefield
4. Total Quality Control by A.Y. Feigenboum
5. Elementary S.O.L. by I.W.Burr, M. Dekkar
MMA-608-A-3 : DESIGN AND METALLURGY OF WELDED JOINTS

Course Objectives:
To study welding defects , control and design of welded joints. Study metallurgy and cost
estimation of welded joints. To study destructive and non destructive testing of welds,
residual stresses and control of residual stresses.
.
Syllabus:
UNIT 1. Weld defects: common weld defects like weld cracks, LOP, LOF, porosity, blow
holes etc., remedies and control, welding symbols.
UNIT 2. Cost analysis of welded joints: costing factors of welding jobs- fabrication cost,
material cost, preparation cost, finishing cost, overhead cost etc., economy in preparation
and welding a job, labour accomplishment factor, cost calculation of welded jobs.
UNIT 3. Prediction and control of distortion: calculation of longitudinal contraction,

transverse contraction, angular contraction due to single weld pass, control of welded
distortion, and calculation of shrinkage.
UNIT 4. Residual stresses: introduction, types, effect of thermal stresses, control of

residual welding stresses.
UNIT 5. Destructive tests: equipment required and test piece geometry for tensile test,
bend test, impact test, hardness test, brittle and fatigue failure tests, non destructive tests
for welds:-dye penetrate inspection, magnetic particle inspection etc.
UNIT 6. Weldability tests: definition and concept of weldability, purpose and types of
weldability tests such as hot cracking test, root cracking tests, hydrogen induced cracking
test, cruciform test.
UNIT 7. Weldability of metals: welding techniques, preparation of joints and electrode

types for gray cast iron welding, aluminium welding, austenitic steels, titanium and its
alloys.
UNIT 8. Welding metallurgy: thermal effect of welding on parent metal, structure of

fusion welds, effect of cooling rate, weld metal solidification and heat affected zone.
UNIT 9. Automation in welding: introduction and concept, classification of welding
automation, economics of welding automation.
 Understand to predict and control of distortion in welded joints.

 Calculate cost estimation of welded joints.
 Understanding the effect of residual stress in welded joints.
 Understanding weld metallurgy: thermal effect of welding on parent metal
 Develop the application of welding automation for enhancing productivity.
Reference books:
1. Modern welding technology:- carry H. B. (PH).
2. Welding technology: - A. C. Devis
3. Welding and welding Technology: - Little (TMH)
4. Welding technology: - R. S. Parmar
5. AWS- welding handbook (IV – VI) Edition
6. Elements of machine design: - Pandya and shah
.
MMA-608-A-4 : ROBOTIC ENGINEERING
Total : 100 Marks
400 4 Duration of Exam: 3 Hours
Course Objectives:
To study various techniques for robotic automation. To study kinematics of robot
manipulation. To study vision and sensing characteristics of robot. Various robot
teaching methods, task programming, robot level programming languages.
Syllabus:
UNIT 1:Introduction:
Automation and Robotics, Historical Development, Definitions, Basic Structure of Robots,
Robot Anatomy, Complete Classification of Robots, Fundamentals about Robot Technology,
Factors related to use Robot Performance, Basic Robot Configurations and their Relative
Merits and Demerits, Types of Drive Systems and their Relative Merits, the Wrist & Gripper
Subassemblies. Concepts and Model about Basic Control System, Transformation and Block
Diagram of Spring Mass System, Control Loops of Robotic Systems, PTP and CP Trajectory
Planning, Different Types of Controllers, Control Approaches of Robots
UNIT2:Kinematics of Robot Manipulator:
Introduction, General Description of Robot Manipulator, Mathematical Preliminaries on
Vectors & Matrices, Homogenous Representation of Objects, Robotic Manipulator Joint Co-
Ordinate System, Euler Angle & Euler Transformations, Roll-Pitch-Yaw(RPY)
Transformation, Relative Transformation, Direct & Inverse Kinematics’ Solution, D H
Representation & Displacement Matrices for Standard Configurations, Geometrical Approach
to Inverse Kinematics. Homogeneous Robotic Differential Transformation: Introduction,
Jacobian Transformation in Robotic Manipulation.
UNIT3:Robotic Workspace & Motion Trajectory:
Introduction, General Structures of Robotic Workspaces, Manipulations with n Revolute
Joints, Robotic Workspace Performance Index, Extreme Reaches of Robotic Hands, Robotic
Task Description.
UNIT 4:Robotic Motion Trajectory Design: –
Introduction, Trajectory Interpolators, Basic Structure of Trajectory Interpolators, Cubic Joint
Trajectories. General Design Consideration on Trajectories:- 4-3-4 & 3-5-3 Trajectories,
Admissible Motion Trajectories.
UNIT5:Robot Teaching:
Introduction, Various Teaching Methods, Task Programming, Survey of Robot Level
Programming Languages, A Robot Program as a Path in Space, Motion Interpolation, WAIT,
SIGNAL & DELAY Commands, Branching, Robot Language Structure, various Textual
Robot Languages Such as VAL II, RAIL, AML and their Features, Typical Programming
Examples such as Palletizing, Loading a Machine Etc,
UNIT 6:Robot Sensing & Vision:
Various Sensors and their Classification, Use of Sensors and Sensor Based System in
Robotics, Machine Vision System, Description, Sensing, Digitizing, Image Processing and
Analysis and Application of Machine Vision System, Robotic Assembly Sensors and
Intelligent Sensors.
UNIT 7: Industrial Applications:
Objectives, Automation in Manufacturing, Robot Application in Industry, Task
Programming, Goals of AI Research, AI Techniques, Robot Intelligence and Task Planning,
Modern Robots, Future Application and Challenges and Case Studies.
 Understand the robotic automation strategies.

 Analyze dynamics of robot manipulator.
 Task programming of robots.
 Understand vision and sensing characteristics of robots.
 General design consideration on trajectories motion of robots.
Text Books/ Reference Books:

A Robot Engineering Textbook – Mohsen Shahinpoor – Harper & Row publishers, New York.
Robotics, control vision and intelligence, Fu, Lee and Gonzalez. McGraw Hill International.
Introduction to Robotics, John J. Craig, Addison Wesley Publishing.
Robotics for Engineers , Yoram Koren, McGraw Hill International.
Industrial Robotics, Groover, Weiss, Nagel, McGraw Hill International.
Robot Technology Fundaments, Keramas, Thomson Vikas Publication House.
Company Fundamentals of Robotics Analysis and Control, Schilling, PHI.
Introduction to Robotics, Niku, Pearson Education, Asia.
NPTEL Video , Web: http://nptel.ac.in, Advanced Robotics
MMA-608-A-5 : MACHINE TOOL DYNAMICS
Course Objectives:
To study various theories of chatter in machine tools. To study damping character ship of
machine tools, dynamic characteristic of the cutting process and dynamic acceptance tests. To
study single and multidegree freedom system of machine tools.
Syllabus:
UNIT 1: Chatter in machine Tools_ sources of chatter, primary chatter, regenerative chatter,
chatter frequency, forced vibration for machine tools, forced vibration due to perturbance of
the cutting process, forced vibration due to perturbance of equivalent elastic system, theories
of machine tool chatter: Tlusty’s, Kudinovs, Toblas theories.
UNIT 2: Machine tool stability: dynamic characteristic of the cutting process, general
procedure for assessing the dynamic characteristic of machine tool in single degree and many
degree of freedom system, methods of reducing the instability in machine tool, dynamic
acceptance tests
UNIT 3: Damping in machine tools: requirements of damping system,. Viscous dampers,

active dampers,
UNIT 4: Static and dynamic analysis of machine tools: lumped parameter method, finite
element method,
UNIT 5: Chatter in grinding machine.
 Understand the theories of chatter in machine tools.
 Analyze damping characteristics of machine tools.
 Analyze static and dynamic analysis of machine tools.
 Understand single and multidegree freedom system of machine
tools.
 Understand chatter in machine tools.
Reference Books:
1. Principles of machine Tools:- G.C.Sen and Amitabh Bhattacharya( New central book
agency Calcutta)
2. Machine Tool Design: - S.K. Mehta (TMH)
MMA-608-A-6: FINITE ELEMENT METHODS

Course Objectives:
To study concepts of FEM, concepts of structural modeling, mathematical analysis of finite
element method ,computer implementation of finite element method, linear analysis and
various non-linearity analysis.
Syllabus:
UNIT 1: Review of basic FEM concepts ,FEM Discretization and the Direct Stiffness Method:
Basic concepts of structural modeling, Review of the stiffness method of structural analysis,
Modeling stiffness, loads and displacement boundary conditions
UNIT 2: Formulation of Finite Elements: Mathematical interpretation of finite elements,

variational formulation, Development of continuum elements, shape functions, consistent loads,
Isoparametric elements for plane stress, Numerical integration, Convergence requirements.
UNIT 1. UNIT 3: Computer Implementation of the Finite Element Method: Pre processing:
model definition, Element level calculations, Equation assembly, Equation solver, Post
processing: strain and stress recovery.
1. Advanced topics in linear problems : Static condensation and sub-structuring , Patch test
and incompatible element , p-formulation
2. Advanced Beam, Plate and Shell elements :
a. Timoshenko beam theory (shear locking)
b. Plate and shell theory
i. Thin plate and Mindlin plate (shear and membrane locking)
ii. Mixed formulation for plate and shell
iii. Degenerated shell formulation
3. Dynamic analysis using FEM
a. Consistent mass and lumped mass, mass lumping technique
b. Time integration methods: explicit, implicit, explicit-implicit methods.
c. Stability, convergence and consistency
d. Hyperbolic systems: structural dynamics and wave propagation
e. Parabolic system: transient heat transfer
f. Modal solution for natural frequencies and mode shapes
g. Modal Superposition method for structural dynamics
4. Nonlinear analysis
a. Nonlinear solution procedures
b. Newton-Raphson, modified Newton-Raphson, and secant methods
c. Line search algorithm
d. Automatic time step control
5. Material nonlinearity
a. Rate independent elastoplasticity with return-mapping algorithm
b. Isotropic and kinematic hardening with Baushinger effect
c. Consistent tangent operator
d. Objective rate and finite rotation elastoplasticity
e. Multiplicative decomposition and finite deformation elastoplasticity
6. Geometric nonlinearity
a. Generalized strain and stress
b. Total and Updated Lagrangian formulation
c. Kirchhoff stress and Cauchy stress
7. Boundary nonlinearity
a. Frictionless contact problems
b. Penalty, Lagrange multiplier, augmented Lagrange multiplier, and perturbed
Lagrange multiplier methods
c. Frictional contact problems including frictional return-mapping algorithm
d. Rigid-flexible contact and flexible-flexible contact
e. Multiplicative decomposition and finite deformation elastoplasticity
8. Geometric nonlinearity
a. Generalized strain and stress
b. Total and Updated Lagrangian formulation
c. Kirchhoff stress and Cauchy stress
9. Boundary nonlinearity
a. Frictionless contact problems
b. Penalty, Lagrange multiplier, augmented Lagrange multiplier, and perturbed
Lagrange multiplier methods
c. Frictional contact problems including frictional return-mapping algorithm
d. Rigid-flexible contact and flexible-flexible contact
Assignments and Tutorials are essential part of this course. Various programming and
formulation problems will be assigned through the course of study.
 Understand the theories of linear system for finite element analysis. 

 Understand the theories of non-linear system for finite element analysis. 
 Develop the formulation of problem for analysis. 
 Analyse non-linear problem solution procedure. 
 Understand modeling of system with load, displacement and boundary
conditions. 
Text Book: Finite element analysis by P.Seshu, PHI, 2003.
NPTEL Video , Web: http://nptel.ac.in, Finite Element Method
MMA-608-A-7 PRINCIPLES OF MANAGEMENT
Sessional: 25
No. of Credits: 4
Marks
Theory : 75
L T P Total
Marks
Total : 100
4 00 4
Marks
Duration of
Exam: 3 Hr
Course Objectives:
To study about Management ,management functions, management model and
theories of management. To Study about organization system, managerial decision
making, QFD and MIS .
Syllabus:
UNIT 1. Introduction: Definition, Management thoughts, Nature & purpose of
management, Management- an art or science, Management vs. administration,
Levels of management and skills required, Management functions, Branches of
management, Management model.
UNIT 2. Theories of management: Traditional Management theory: Taylor’s

Theory, Scientific Management, Henry Fayol’s management Theory,
Behavioural Theory: comparison of traditional and behavioural theory,
Maslow’s need hierarchy theory, Herzberg’s Two factor theory, Theory X and
Theory Y, Contingency approach to management.
UNIT 3. Organisation as a system: Interaction with external environment.

Managerial decision making and MIS. Planning approach to organizational
analysis, design of organization structure: job design and enrichment; job
evaluation and merit rating, Motivation and productivity. Leadership styles and
managerial grid. Co-ordination, monitoring and control in organizations.
Techniques of control.
UNIT 4. Management techniques: Conventional management tools,

applications of cause & effect diagram, Pareto analysis, Force field analysis,
QFD.
UNIT 5. Introduction to Japanese techniques- 5S, Kaizen, JIT, SCM, ERP, Six
Sigma, TPM, TQM.
UNIT 6. Case studies.
 Understand management functions .
 Understanding about theories of management.
 Understand about the organization as a system.
 Understanding about the techniques of management
,5S,Kaizen,JIT,SCM,ERP,Six Sigma,TPM,TQM.
 Understand usage of management techniques with applications.
Reference books:
1. “ Management” by James A.F. Stoner, R.Edward Freeman, Daniel R.
Gilbert.(Prentice-Hall of India)
2. “Management for Business and Industry” by Claude S. George. (PHI Private
Ltd.)
3. “Management Information Systems” by W. S. Jawadekar. (Tata McGraw-Hill
Publishing Co.)
4. “Principles & Practice of Management” by T.N.CHHABRA. (Dhanpat Rai
&Co. (P) Ltd.
5. “Motivation and Productivity” by Saul W. Gellerman. (D.B. Taraporevala
sons & Co.)
MMA-608 A-8: SUPPLY CHAIN MANAGEMENT
Course Objectives:
To study the concept of supply chain management, supply chain dynamics, supply chain
performance measurement, key issues in supply chain, application of internet in SCM and
various quantitative tools in SCM.
Syllabus:
Unit 1 Overview of supply chain management: Introduction, Definitions of SCM, types of SCM,
process for implementation of SCM, Parties involve in SC, Flows in supply chain, Goals of SCM,
Obstacles to process integration in SC, Key issues in SC.
Unit 2 Supply chain dynamics: Introduction, Bullwhip effect, Impact of Lead time, offshoring and
outsourcing on SC dynamic and cost.
Unit 3 Performance measurement: Introduction, Purpose, Measuring the supply chain performance,
Evolving SC matrices, Performance Monitoring, Key supply chain performance indicators, various issues
related to SC performance, world class performance measurement system.
Unit 4 Transportation, storage and warehousing: Introduction, Transportation mode choice, Transport
operator decisions, Trucking sectors in India, Rail transport, Air Transport, Water transport, Transport
network, Storage and warehousing, types of warehousing, risk pooling.
Unit 5 IT Integration: Supply chain information system, Role of IT in SCM process, Business process
Re-engineering, Internet and its applications in SCM.
Unit 6 Quantitative tools for SCM: Introduction, Forecasting, Demand forecast, Forecasting strategy &
technique, Management of Inventories in SC, Linear programming, Routing models, pricing decisions,
Introduction to MCDM approach.
 Understand the process for implementation of SCM.
 Analyse the effect of various parameters on the Supply chain dynamics.
 Analyse various issues related to SC performance.
 Understand application of internet in SCM.
 Implementation of various Quantitative tools for SCM.
Text Books:
1. Designing and Managing the Supply Chain concepts, Strategies and Case studies by D. Simchi-
Levi, P. Kaminsky, E. Simchi-Levi, and Ravi Shankar, Tata McGraw Hill.
2. Supply Chain Management, Strategy planning and operation by Chopra and Mendel,
Prentice Hall.
MMA-610-A : METAL CUTTING LAB

0 0 2 2 Total : 50 Marks
Course Objectives:
 To impart knowledge about the cutting tools through live experiments
 To develop domain knowledge in the field of metal cutting, conventional as well as non-
conventional machining operations.
List of Experiments:
1. To identify various angles and parameters of various single point cutting tools
2. To identify various angles and parameters of various multipoint cutting tools
3. To grind various angles on a single point cutting tool.
4. To identify chips produced in turning of Aluminium, mild steel work piece at different speeds
and feeds
5. To perform some hole making operations on Electro- Discharge Machine (EDM).
6. To study wear of cutting tool in turning.
7.To study surface finish by varying cutting parameters on surface grinding machine.
8. To cut a spur gear on gear shaping machine
9. To braze a carbide tip on a carbon steel tool shank.
10. To study effect of cutting fluid on machining.
11. To produce and inspect a splined/round hole on horizontal Broaching Machine.
Course Outcomes (CO): At the end of the course, the students will be able to:
1. Understand various angles and parameters of single as well as multipoint tools.
2. Differentiate the kinds of chips produced in the machining of Aluminium and Mild Steel
3. Understand the basic operation of EDM and Broaching machines through hole making
operations
4. Understand the gear production method through Gear shaping machine
5. Understand the effects of cutting fluid in machining operations
MMA-612-A : AUTOMATION LAB
Course Objectives:
To develop domain knowledge in the field of automation of mechanical equipments and select
equipments for automation. To design various types of feeders . Study a variety of softwares for
automation of mechanical equipments .
1. To study the hardware of a retrofit and CNC machine tools.

2. Selection of various equipments required with the specifications from Internet/Catalogue: To convert a
manual machine tool/system into an automatic machine tool/system.
3. To write programme with G code and M code for a component.
4. To simulate machining of component using machining software.
5. Study and applications of Hydraulic software.
6. Study and applications of Pneumatic software.
7. Study and applications of Robotic software.
8. Study and applications of PLC software.
9. To design an automated part feeder.
10. Developing pneumatic circuits for casting.
11.To simulate gear hobbing process and to calculate gear hobbing time.
 Understand the various practical demonstrations of automation of mechanical
equipments. 
 To utilize the theories for designing feeder system. 
 Selection of equipments and practical demonstration. 
 Operation of variety of software .
 Computer programming on CNC machine. 

MMA-614-A: CAD/CAM LAB

Course Objectives:
To develop domain knowledge in the field of CAD /CAM. Exposure to CAD tools for use in mechanical
engineering design conceptualization, geometric modelling, communication, analysis and optimization,
further use in CAD, CAM, related courses and research work. Impart knowledge related to principles,
methods and techniques of 3D modelling in parametric CAD software. Undertake project works in use
of CAD geometric modeling software for design analysis, evaluation and optimization using a
professional software.
1. Introduction to CAD, CAM & CIM

2. Development of orthographic models in AUTOCAD /PRO-E/CATIA
3. Introduction & Development of 3-d models in AUTOCAD /PRO-E/CATIA
4. Introduction to surface modeling
5. Introduction to part assembly
6. Introduction & comparison in b/w different 3-D software of design
7. Introduction of part programming (g& m codes)
8. Simulation of design’s in CNC machine shop
9. Introduction to FEM packages
10. Introduction to rapid prototyping
11. Create the geometric model using any of the modeling package
12. Generate the sequence employed to generate solid model


Review and train in CAD modeling. • use parametric CAD software for geometric modeling of
mechanical designs. Translate production drawings to 3D CAD models. Evaluate a
mechanical design and optimize it using CAD, CAE software. use 2D / 3D CAD and CAE for
use in other courses and research thesis work
MMA-701-A : COMPUTER INTEGRATED MANUFACTURING
Course Objectives:
Study the basic concepts of computer integrated manufacturing, NC,CNC and DNC
system. Illustrate the numerical control and part programming. Study the concept of
computer aided quality control and material handling.
Syllabus:
UNIT 1. Introduction: CAD/ CAM defined, computer technology: introduction, central
processing unit, types of memory, input/ output, the binary number system, computer
programming languages. Role of CAD/CAM in improving the product cycle. Introduction
to CIM. Applications of computers in CIM.
UNIT 2. Conventional Numerical Control: basic components of NC system, NC motion
control, system, applications of NC, advantages and disadvantages of NC, problems with
conventional NC, NC controller technology, computer Numerical control, advantages of
CNC, functions of CNC, Direct Numerical Control, components of a DNC system,
functions of DNC, advantages of DNC.
UNIT 3. NC part programming: introduction, punched tapes in NC, tape coding and
format, NC words, manual part programming, computer assisted part programming, The
part programmer’s job, the computer’s job, NC part programming languages, APT
language, geometry statements, motion statements, post processor statements, auxiliary
statements.
UNIT 4. Robotics technology: joints and links, common robot configuration, work
volume, drive systems, types of robot control, accuracy and repeatability, end effectors,
sensors in robotics, applications of robots.
UNIT 5. Automated material Handling and FMS.: material handling function, types of
material handling equipments, conveyor systems, types of conveyors, automated guided
vehicle system, applications, FMS, components of a FMS, types of systems, where to
apply FMS technology, FMS workstation, planning the FMS.
UNIT 6. Computer aided quality control: Introduction, the computer in QC, contact and
non contact Inspection methods- optical and non optical, computer aided testing.
Coordinate measuring machine(CMM)- its construction, drive systems, programming
methods, softwares used in CMM,applications and benefits of CMM. Machine Vision
System- its basic functions, Image acquisition and digitization, Image processing and
analysis, Interpretation, applications of machine vision system.
UNIT 7. Computer Integrated Manufacturing systems: Introduction, Technologies used
in CIM, Difference between CIM and FMS, CIM hierarchy system, Implementation
process of CIM, applications and benefits of CIM.
Course Outcomes: Towards the end of the course, the students should be able to:
o Apply robotic control and sensors for quality improvement.
o Understand the role of CAD/CAM in improving product life cycle.
o Understand different concepts of FMS .
o Prepare and analyse numerical control programming.
o Understand computer aided testing to various equipment.
Reference books:
1. CNC Technology and Programming—Tilak Raj
2. Automation, Production systems and Computer Integrated Manufacturing :- Groover
M. P. (PHI)
3. CAD/CAM : - Zimmers and Groover (PHI)
4. Approach to computer integrated design and manufacturing :- Nanua Singh (John
Wiley and sons)
MMA-703-A : MATERIAL MANAGEMENT
Course Objectives:
Study the basic concepts of materials management like productivity, techniques of materials
management ,purchasing in production process and cost reduction techniques.Illustrate the
material requirement planning process like JIT, production planning, economic analysis and
break even analysis .
Syllabus:
UNIT 1: Introduction: introduction to material management and productivity, functions of
material management, organization structures in material management, role of material
management techniques in improved material productivity.
UNIT 2:Material planning: objectives, material requirement planning, manufacturing resource

planning, JIT production planning, strategic material planning, material control: acceptance,
sampling, inspection, make or buy decision, simple cost analysis, economic analysis, break even
analysis, break even point theory, whether to add or drop a product line store management and
warehousing, product explosion.
UNIT 3: Purchasing: importance of good purchasing system, organization of purchasing

functions, purchase policy and procedures, responsibility and limitations, purchasing decisions,
purchasing role in new product development, role of purchasing in cost reduction, negotiations
and purchase, purchasing research: identification of right sources of supply, vendor rating,
standardization, vendor certification plans, vendor and supply reliability, developing new source
of supply.
UNIT4:Cost reduction: cost control v/s cost reduction, price analysis, material cost reduction
techniques, variety reduction, cost reduction and value improvement, techniques of cost control,
standard costing, cost effectiveness, cost analysis for material management, material flow cost
control.
UNIT 5: Inventory management: inventory v/s stores, types of inventory, inventory control,
inventory build –up, EOQ, various inventory models, inventory models with quantity discount,
exchange curve concept, coverage analysis, optimal stocking and issuing policies, inventory
management of perishable commodities, ABC – VED analysis, design of inventory distribution
systems, surplus management, information system for inventory management, case studies.
 Understand materials management techniques for productivity improvement.
 Analyse the concept of materials planning with the theoretical concepts like
break even analysis, JIT etc.
 Apply different concepts of Purchasing while purchasing a material for the
company.
 Understand mathematical model the cost reduction techniques for reducing the
cost & enhancing the profits of an organization.
 Analyse inventory management techniques like EOQ for the efficient Inventory
management of production plant.
Reference books:
1. Material management :- W. R. Stelzer Jr. (PHI)

2. Material management :- D. S. Ammer & Richard Erwin Inc.
3. Material management :- A. K. Dutta (PHI)
4. Material management- An integrated approach :- P. Gopal;akrishnan,& M. Sundersen
(PHI)
Elective-II
MMA-705-A -1: ARTIFICIAL INTELLIGENCE

Course Objectives:
Study concept of artificial intelligence,overview of expert systems, the concepts AI in
manufacturing problems. AI theory problems, problem spaces and search, Heuristic search
technique and knowledge acquisition.
Syllabus:
UNIT 1. Definition, basic concepts of artificial Intelligence, scope, role and potential of
artificial intelligence in manufacturing, Expert systems, Popular AI application.
UNIT 2. Overview of Expert systems, architecture, comparison with procedural

programming, developing Expert system for typical manufacturing domains,
implementation and maintenance, state- of- art Expert system application, case study.
UNIT 3. AI theory problems, problem spaces and search, Heuristic search technique,
Knowledge acquisition and knowledge representation, predicate logic, procedurals
Declarative knowledge, forward V/s backward reasoning AI architecture, overview of
advanced features, planning, learning, natural language processing, neural nets, fuzzy
logic, object oriented programs.
UNIT 4. Case studies, examples of AI, theoretical concepts to manufacturing problems,

CAD, CAPP, scheduling GT, CIM system.Domains welding, casting, forming, metal
cutting, maintenance.
o Understand knowledge acquisition and knowledge representation.
o Apply artificial intelligence in manufacturing.
o Understand expert system application.
o Analyze state-of art expert system application.
o Apply theoretical concepts to manufacturing problems.
MMA-705-A- 2 : VALUE ENGINEERING

Course Objectives:
To enhance value of a component either by reducing cost or by increasing its function. To study
how to improve resource efficiency. To reduce operational, maintenance cost and help industries
in competing more successfully in market.
Syllabus:
UNIT 1. Introduction, Life cycle of a Product, Definition, objectives and methodology of
value Engineering, Comparison with other cost reduction techniques, unnecessary cost.
UNIT 2. Quantitative definition of values, alternatives to increase value, Type of value,

estimation of Product Quality/performance.
UNIT 3. Functions: definition, types and relationship between different functions in design
of a Product, functional cost, functional worth, test for poor value, aim of value
engineering. Systematic approach, Phases of value engineering Job plan: General phase,
information phase, function phase creation/speculation phase, evaluation phase,
investigation phase, recommendation and implementation phase.
UNIT 4. Decision /evaluation Matrix: Quantitative comparison of alternatives, estimation

of weight factors and efficiency.
UNIT 5. FAST diagramming: Critical path of function, How, why and when logic,
supporting and all time functions, Ground rule for FAST diagram.
UNIT 6. Case studies.
 Understand about the life cycle of the product.

 Complete understanding about methodologies of value engineering.
 Understand about the different functions of product design & their
relationship.
 Understand the phases of value engineering.
 Understand the cost reduction techniques.
1. Value Engineering – A systematic Approach
-A.E. Mudge
2 Techniques of value analysis and value engineering
-L.D. Miles
3 Value engineering for cost reduction and product improvement
-H S Mittal
MMA-705-A-3 : ADVANCED THEORY OF VIBRATIONS

Course Objectives:
To study essential concepts for Mechanical Vibrations induced in various equipment. To study
and analyze effects of vibrations in equipment. To study experimental methods in vibration
analysis, vibration exciters, transducers and measurement devices.
Syllabus:
UNIT 1. Single degree of freedom systems, two degree of freedom systems: spring
coupled, mass coupled, vibration absorbers, and vibration isolation.
UNIT 2. Multi degree of freedom systems: Lagrange’s equation, close couples and far
coupled systems, dunker ley’s approximation method, rayleigh method, matrix method,
matrix iteration, orthogonality principle, orthogonality, expansion theorem and modal
analysis, stodola method, holzer method, galerkin method, rayleigh- ritz method,
myklested – prohl method for far coupled systems, transfer matrix method
UNIT 3. Experimental methods in vibration analysis: vibration instruments, vibration

exciters, transducers and measurement devices, analyzers, vibration tests:- free and forced
vibration tests.
UNIT 4. Vibration of continuous systems: Transverse, flexural, torsional vibration of

beams, timoshenko beam, Hamilton principle, vibration of plates, collocation method,
myklested – prohl method.
UNIT 5. Transient vibrations: duhamel’s integral, method of step input, phase plane
method, method of laplace transformation, drop test spectra by laplace transformations.
UNIT 6. Non linear vibrations: non linear vibrations and superposition principle, examples
of non linear vibrations, method of dealing with non linear vibrations, phase plane
trajectories, method of direct integration, perturbation method, iteration method, Fourier
series.
o Understand the fundamentals of mechanical vibrations leading to

analysis of first degree of freedom
o To understand the concept of two degree of vibration and vibration
isolation and transmissibility
o Analyse experimental methods for vibration analysis.

o Understanding the influence and stiffness coefficients.
o Analyse the concept of the non-linearity in vibrations.
Reference books:
1. Theory of vibration with applications:- W. T. Thomson (PHI)

2. Theory and practice of mechanical vibrations:- J. S. Rao & K. Gupta (Wiley eastern)
3. Mechanical vibration :- S. S. Rao (Addison Wesley)
4. Vibration and noise for Engineers :- Kewal Pujara (Dhanpat Rai and Co.)
5. Mechanical vibrations :- G. K. Grover and Nigam (Nem chand and sons )
6. An introduction to mechanical vibrations :- Steidel (John Wiley)
7. Elements of vibration analysis :- Meirovitch (TMH)
MMA-705-A-4 : TOTAL QUALITY MANAGEMENT

Course Objectives:
Understand the definition of quality given by different qualities Gurus
Have an insight into the concepts & dimensions of quality.
Analyze the enablers for TQM Environment and their impact thereof
Understand the hard options and soft options TQM
Develop Knowledge of tools & techniques, quality awards.
Syllabus:
Introduction
Quality – Basic concepts, dimensions, economics of quality, quality Gurus.
TQM: Definition, evolution, journey from inspection to TQM, comparison at different stages,
dimensions of TQM, TQM viewpoints, reasons for adopting TQM.
Introspection to TQM environment

Sphere of TQM, components of TQM, TQM – Managing Total Quality, Factors affecting TQM
environment, Classification and interaction among factors, Researchers’ viewpoint, TQM as a
system, steps in TQM implementation, Roadblocks in TQM implementation, Reasons for TQM
failure.
Role of soft options in TQM

Hard vs. Soft factors, Role and expectation of employer, employee, customer and supplier from
organization and vice versa. Human factors in TQM, Role of top management commitment, work
culture, motivation, coordination, attitude, innovation.
Quality initiatives in organizations

Role of tools and techniques in TQM, Classification of tools and techniques – Problem
identification, Data analysis, Graphical, Creativity, Company wide.
Brief description of Quality awards – MBNQA, Deming award, European quality award,
Australian quality award.
TQM Effectiveness
Impact of TQM, Need and difficulty in measuring TQM effect, Parameters governing effect of
TQM and the attributes thereof.
 Understand the concepts & dimensions of quality.
 Understand the definition of quality given by different quality gurus.
 Understand the quality at different stages.
 Understand the hard, soft & human factors of quality.
 Develop knowledge of tools & techniques, quality awards.
Reference books:
1) “Total Quality Management” by Oakland (Butterworth – Heinamann Ltd.)
2) “Managing for total quality from Deming to Taguchi and SPC” by Logothetis N. (PHI)
3) “Total Quality Control” by Feigenbaum A.V. (MGH)
4) “Total Quality Management” by Besterfield Dale H (Pearson Education)
5) “A slice by slice guide to TQM” by John Gilbert (Affiliated East West Press)
6) “The TQM toolkit – a guide to practical techniques for TQM” by Waller Jenny, Allen
Derek and Burna Andrew (Kogan Page)
Useful weblinks:
1. http://nptel.ac.in/courses/122106032/pdf/4.1.pdf
2. http://nptel.ac.in/courses/110101010/
3. http://nptel.ac.in/courses/110105039/10
4. http://freevideolectures.com/course/2688/human-Resource-Managment/13
5. http://textofvideo.nptel.iitm.ac.in/110105039/lec1.pdf
Note: Each student will review a research paper on TQM as a part of assignment which
will carry due weightage.
MMA-705-A-5 : METAL FORMING ANALYSIS

Course Objectives:
To study effects of temperature and strain rate in metal working and application of finite
element methods to metal forming processes. To study plastic deformation problems for metal
forming analysis and analysis of important metal forming processes.
Syllabus:
UNIT 1. Stress- Strain relations in Elastic and plastic Deformations, Yield Criteria for
Ductile Metals, Work hardening and Anisotropy in Yielding, Flow Curves.
UNIT 2. Formulations of plastic deformation problems, application of theory of plasticity
for solving metal forming problems using Slab method, Upper and lower Bound methods,
Slip line field theory
UNIT 3. Effects of temperature and strain rate in metal working, friction and lubrication in
Hot and Cold working.Technology and analysis of important metal forming processes-
Forging, Rolling, Extrusion. Wire drawing, Sheet Metal forming processes like Deep
drawing, Stretch forming, Bending
UNIT 4. Application of Finite Element Methods to Metal Forming Processes- special
Discretization, Shape function, Stiffness matrices and their assembly, Implicit and explicit
formulations, Elasto-plastic approximations, Lagrangian Vs Eularian schemes, Material
integration schemes, auxiliary equations for contact, friction and incompressibility,
Thermo-mechanical problem formulation, steady state solutions for Drawing, Forging,
rolling and extrusion problems
UNIT 5. Case Studies- analysis and validation of metal forming processes problems by
standard softwares.
UNIT 6. Forming defects in products and their critical effects, remedies.
UNIT 7. An introduction to use of International standards in Metal Forming Problem
solutions and system Design
 Understand application of finite element methods to metal forming processes.

 Understand the formulations of plastic deformation problems for metal forming
analysis.
 Understand technology and analysis of important metal forming processes-
forging, rolling, extrusion, wire drawing, sheet metal forming processes.
 Understand the thermos-mechanical problem formulation.
 Analyse the effect of friction and lubrication in hot and cold working of materials.
Reference Books :
1. Metal Forming Analysis- R. H. Wagoner, Cambridge University Press.
2. Theory of Elasticity- Dally and Riley
3. Physical Metallurgy- Dieter, McGraw Hill Inc.
4. Metal Forming Handbook by H Frontzek, M Kasparbauer , Springer Verleg
MMA-705-A-6 : MECHANICAL BEHAVIOR OF MATERIALS

Course Objectives:
To study plastics, composites, smart materials and non-material. To study improvement in

design parameters using non-common metal and analysis of various properties for plastic
components, manufacturing techniques of plastics materials.
Syllabus:
INTRODUCTION
Modern materials in design- plastics, composites, smart materials and nanomaterials, Weight reduction
using plastics and composites, Properties and uses of plastics, composites, smart materials and
nanomaterials in the design of mechanical equipments. Estimation of factor of safety in design.
DESIGN OF PLASTIC COMPONENTS
Analysis of various properties for plastic components, manufacturing techniques of plastics, Various
design considerations for plastic components, Applications of plastics in design of mechanical
equipments, Mechanical properties of glass filled –polyphenylene, glass filled -polyethylene and glass
filled-polyurethane.
DESIGN OF COMPOSITE STRUCTURE
Structure and specific properties of composites, polymer-composite properties and application in aircraft
industry, Prediction of service life, Main stages in composite structure design, Technological concept and
production structure, Application of composites in passengers aircraft structures, Types of composite
joints and their applications, Mechanical –joint design, Stress concentration and hole geometry.
Characteristics of particulate composite materials, Metal-matrix composites, Fatigue failure in particulate
composite material, Design and manufacturing of particulate composites, Shot peening for improving
fatigue and mechanical properties of particulate composite materials, Mechanical properties of
Aluminium-silicon carbide, Aluminium-alumina, Aluminium-boron fibre particulate composites .
SMART MATERIALS
Design and various characteristics of smart materials, Application of smart materials for design of
intelligent structures, Smart paint, Modeling analysis and design of simple mechanical systems using
smart materials.
NANOMATERIALS
Nanotechnology, Nanoscale, Design applicaions, Nanotubes, Nano-sized particles in composites,
Fabrication of nano-sized particles, nanodevices.
 Understand the improvement in design parameters using plastics.
 Understand the improvement in design parameters using composites.
 Understand the improvement in design parameters using smart materials.
 Understand the improvement in design parameters using nano-materials.
 Understand the improvement in design parameters using composites in
aircraft structure.
Reference books:
1. Composite manufacturing technology by A.G. Bratukhin and V.S. Bogolyubov, Chapman &Hall
publication.
2. Smart Materials and Structures, M.V. Gandhi and B.S. Thomson, Chapman &Hall.
3. Machine Design by R.L. Norton, Pearson Asia publication.
4. Introduction to Nanotechnology, Charles P Poole and Frank J.Owens, Wiley-
Inderscience,2003
MMA-707-A : PROJECT MANAGEMENT
Course Objectives:
To develop project within time, resource & budget,types of projects, project life cycle and
decisions.. To align project execution with strategies. To identify project issues clearly and
come up with new solutions.
Syllabus:
UNIT 1. Introduction & Overview: Definitions, Types of projects, Project life cycle
(Project phases) and decisions.
UNIT 2. Go/ No go decisions based on: a) Project Identification and Screening, b)

Project Appraisal: Market, Technical, social, Ecological & Financial, c) Project
Selection: Pragmatic, pair wise, MADM approach.
UNIT 3. Development of Project Network: Project description, Work break down

structure, Nomenclature, Rules for drawing and representation, consistency and
Redundancy in Project Networks, Matrix representation.
UNIT 4. Basic Scheduling with Networks (Forward & Backward Pass)
UNIT 5. CPM & PERT: Activity times, Completion, Floats, Probability (ND
usage), Examples, and Problems.
UNIT 6. Project Monitoring & Control: Project adjustments, Crashing: Direct &
Indirect cost, Normal & Crash: duration & cost, Resource leveling: Types, usage,
leveling, Problems, Managing Risk.
UNIT 7. Role of Human Factors: Dealing with people Team Building and
Leadership in Projects, commitment, work culture, motivation, coordination, attitude,
innovation.
UNIT 8. Project Completion, Review and Future Directions
 Understand about the types of projects & project life cycle.
 Complete understanding about development of project network.
 Understand about the crashing of a project.
 Understand Project evaluation & review technique (PERT) & Critical path
method (CPM).
 Understand , how to control & monitor a project.
Reference books:
1. Project Management by Clifford Gray and Erik Larson. (Tata McGraw Hill Edition)
2. Management Guide to PERT/ CPM by Wiest, JD and Levy F.K. (PHI)
3. Industrial Engg. & Mgmt. by Dr Ravi Shankar. Galgotia Publications.
MMA-709-A : PRESENTATION SKILL DEVELOPEMENT
No. of Credits: 1
L T P Total
002 2
Course Objectives:
To discuss clearly your idea/topic. To explain process of work in a sequence in clean
manner. To have a questionnaire with audience at last. Audience to make understand
your topic and to coordinate with the audience.
 Understand about the ethics of presentation.

 Understand, how to co-ordinate with others.
 Analyze and answer the questions in better manner.
 Understand the ideas of others on same topic.
 Understand, how to keep your presentation simple and effective.
MMA-711-A: CIM LAB
0 0 2 2 Total : 50 Marks
Course Objectives:
 To impart knowledge about the computerized machining and inspection methods
in advanced manufacturing systems
 To develop domain knowledge in the field of Computer Integrated Manufacturing
(CIM)
1. To study general features different parts and specifications of a CNC Machining
Centre.
2. To prepare part program and machine a steel/cast iron/aluminium component on
CNC Machining Centre.
3. To study general features, different parts and specifications of a CNC Turning
Centre.
4. To prepare part program and machine a steel/cast iron/aluminium component on
CNC Turning Centre.
5. To study Robot anatomy and related attributes (i.e. different types of joints, links,
configurations, drive and control systems, end effectors and sensors used in
robots).
6. Demonstration of some small activity of an industrial robot.
7. To study some general features guidance technologies and traffic management
system of Automated Guided Vehicles (AGVs).
8. To study different configurations, drive systems and software used in Coordinate
Measuring Machine (CMM).
9. To study the basic concept of Machine Vision System
Course Outcomes (CO): At the end of the course, the students will be able to:
1. Understand the basic features of CNC Machining Centres and CNC Turning
Centres
2. Understand the part programming of CNC Machining Centres and CNC
Turning Centres through live demonstrations of machining examples
3. Learn the basics of Automatic Guided Vehicles (AGVs) and Robotics
4. Learn about the basic knowledge about Coordinate Measuring Machine
(CMM) and Machine Vision System
MMA-713-A: PROJECT
L T P
0 0 12
Every student of this programme would work on a project as per guidelines from the
department. The project is essentially to be an innovative project in the area of
manufacturing technology and automation.
The project report must consist of following chapters:
Chapter 1- Introduction
Chapter 2- Literature Review
Chapter 3- Problem Formulation
(It can span in two to three sub chapters depending on the type and volume of the work)
Chapter 4- Result and Discussion
Chapter 5-Conclusions and future scope
References
Appendix (if any)
Annexure-I,II,III
MMA-702-A : DISSERTATION
L T P
0 0 24
Every student of this programme would work for the completion of his/her dissertation as per
guidelines from the department.
INSTRUCTIONS FOR M.TECH. DISSERTATION/ THESIS
1. The thesis shall be computer typed (English- British, Font -Times Roman, Size-12 point)
and printed on A4 size paper.
2. The thesis shall be hard bound with cover page in light green colour. The name of the
candidate, degree (specifying the specialization) ,year of submission, name of the
University including school name shall be printed in black on the cover [Refer sample
sheet (outer cover)]
3. The thesis shall be typed on one side only with double space with a margin 3.5 cm on the
left, 2.5 cm on the top, and 1.25 cm on the right and at bottom.
4. In the thesis, the title page [Refer sample sheet (inner cover)] should be given first then
the Certificate by the candidate and the supervisor(s) in sequence, followed by an abstract
of the thesis (not exceeding 1500 words). This should be followed by the
acknowledgment, list of figures/list of tables, notations/nomenclature, and then contents
with page numbers.
5. In the body of the text, a reference should be indicated giving author’s name and year of
publication in parenthesis such as (Malhotra and Singh, 2016).
6. The reference should be given at the end of the Thesis in alphabetical order indicating:
i). The authors name and his initials and if more than two co-authors are there then you
can give first author details followed by et.al.
ii). The title of the paper and name of the journal
iii). The name of the book and the publisher
iv) The number of the volume, page numbers, and the year of publication
(v) standard abbreviation may be used in the names of the journals

For Example:
A. Singh, S. and Shan, H. S. (2002) “Development of Magneto Abrasive Flow Machining

Process”, International Journal of Machine Tools & Manufacturing, vol. 42, 2, pp. 953-
959.
B. Laroiya, S.C. and Adithan, M. (1994), “Precision Machining of Advanced Ceremics”

Proceeding of the International Conference on Advanced Manufacturing Technology
(ICMAT - 94), University Teknoloi Malaysia, Johor Bahru ,Malaysia, pp 203-210.
C. Adithan, M. and Gupta, A.B. (1996), “Manufacturing Technology”, New Age,

International Publishers, New Delhi.
7. The diagrams should be printed on a light/white back ground, Tabular matter should be
clearly arranged. Decimal point may be indicated by full stop(.)The caption for Figure
must be given at the BOTTOM of the Fig. and Caption for the Table must be given at the
TOP of the Table only.
8. The graphs should be combined for the same parameters for proper comparison. Single
graph should be avoided as far as possible.
9. Conclusions must not exceed more than two pages.
10. The thesis must consist of following chapters
Chapter 1- Introduction
Chapter 2- Literature Review
Chapter 3- Problem Formulation
(It can span in two to three sub chapters depending on the type and volume of the work)
Chapter 4- Result and Discussion
Chapter 5-Conclusions and future scope
References
Appendix (if any)
Annexure-I,II,III
Syllabus for Open Elective Subjects
Intelligent Systems (GEC-1)
Sessional: 25 Marks
No. of Credits: 3 Theory :75 Marks
L T P Total Total :100
3 00 3 Duration of Exams: 3 Hours
UNIT 1: Fundamental Issues In IS : Definition of AI , History ,Domains AI ,AI problems &

State space ,Some examples problems representations like Travelling Salespersons ,Syntax
analysis Problem .Basic issues to solve AI problems ,Underlying assumptions ,AI techniques
,Level of model ,Criteria for success ,Control strategies ,DFS,BFS
UNIT 2:Heuristic Search Techniques :Generate & Test, Hill Climbing (simple & stipest),
Best first search ,A*, AO*, Constraint satisfaction.
UNIT 3:Knowledge Representation Issues :Systax & Semantic for Propositional logic
,Syntax & Semantic for FOPL, Properties for WFF’s, Resolution Basics :conversion to
clausal form ,Resolution of proposition logic ,Resolution algorithms for predicates ,Problems
with FOPL ,Semantic nets ,Frames ,Scripts
UNIT 4:Reasoning Under Uncertainity :An introduction ,Default reasoning & Closed world
assumptions ,Model & Temporal logic, Fuzzy logic, Basian Probabilstic inference
Dempster Shafer theory ,Heuristic reasoning methods
UNIT 5:Planning & Learning :Planning, Planning in Situational calculus ,Representation for
planning, Partial order planning, Partial order planning algorithm, Learning by Examples
,Learning by Analogy, Explanation based learning, Neurals nets, Genetics algorithms
Unit 6: Minimax: Game playing strategy ,Natural language processing, Overview of

linguistics, Grammer & Language ,Transformation Grammer, Basic Parsing Techniques,
Expert System, Architecture of Rule based Expert system, Non Rule based Expert system.
REFERENCES
1. Artificial Intelligence by Elain Rich & Kevin Knight, Tata McGraw Hills Pub.
2. Principals of AI by Nills .J.Nilsson, Pearson Education Pub.
3. Artificial Intelligence by DAN. W.Petterson. Printice Hall of India
4. Artificial Intelligence by Petrick Henry Winston,
5. Artificial Intelligence by Russel and Norvig, Pearson Education Pub.
Cyber Laws and Security (GEC-2)
Sessional: 25 Marks
No. of Credits: 3
Theory :75 Marks
L T P Total
Total :100
3 00 3
Duration of Exams: 3 Hours
UNIT-I :History of Information Systems and its Importance, basics, Changing Nature of
Information Systems, Need of Distributed Information Systems, Role of Internet and
Web Services, Information System Threats and attacks, Classification of Threats and
Assessing Damages Security in Mobile and Wireless Computing- Security Challenges
in Mobile Devices, authentication Service Security, Security Implication for
organizations, Laptops Security Basic Principles of Information Security,
Confidentiality, Integrity Availability and other terms in Information Security,
Information Classification and their Roles.
UNIT-II: Security Threats to E Commerce, Virtual Organization, Business Transactions on

Web, E Governance and EDI, Concepts in Electronics payment systems, E Cash,
Credit/Debit Cards. Physical Security- Needs, Disaster and Controls, Basic Tenets of
Physical Security and Physical Entry Controls, Access Control- Biometrics, Factors in
Biometrics Systems, Benefits, Criteria for selection of biometrics, Design Issues in
Biometric Systems, Interoperability Issues, Economic and Social Aspects, Legal
Challenges
UNIT-III : Model of Cryptographic Systems, Issues in Documents Security, System of Keys,

Public Key Cryptography, Digital Signature, Requirement of Digital Signature
System, Finger Prints, Firewalls, Design and Implementation Issues, Policies
Network Security- Basic Concepts, Dimensions, Perimeter for Network
Protection, Network Attacks, Need of Intrusion Monitoring and Detection, Intrusion
Detection Virtual Private Networks- Need, Use of Tunneling with VPN,
Authentication Mechanisms, Types of VPNs and their Usage, Security Concerns in
VPN
UNIT-IV : Security metrics- Classification and their benefits Information Security & Law,
IPR, Patent Law, Copyright Law, Legal Issues in Data mIning Security, Building
Security into Software Life Cycle Ethics- Ethical Issues, Issues in Data and
Software Privacy Cyber Crime Types & overview of Cyber Crimes
REFERENCES
1. Godbole,“ Information Systems Security”, Willey
2. Merkov, Breithaupt, “ Information Security”, Pearson Education
3. Yadav, “Foundations of Information Technology”, New Age, Delhi
4. Schou, Shoemaker, “ Information Assurance for the Enterprise”, Tata McGraw Hill
5. Sood,“Cyber Laws Simplified”, Mc Graw Hill
6. Furnell, “Computer Insecurity”, Springer 7. IT Act 2000
Soft Computing (GEC-3)
Sessional: 25 Marks
UNIT-I.Neural Networks: History, overview of biological Neuro-system, Mathematical

Models of Neurons, ANN architecture, Learning rules, Learning Paradigms-
Supervised, Unsupervised and reinforcement Learning, ANN training Algorithms-
perceptions, Training rules, Delta, Back Propagation Algorithm, Multilayer
Perception Model, Hopfield Networks, Associative Memories, Applications of
Artificial Neural Networks.
UNIT-II.Fuzzy Logic: Introduction to Fuzzy Logic, Classical and Fuzzy Sets: Overview of
Classical Sets, Membership Function, Fuzzy rule generation.
UNIT-III.Operations on Fuzzy Sets: Compliment, Intersections, Unions, Combinations of

Operations, Aggregation Operations.
UNIT-IV:Fuzzy Arithmetic: Fuzzy Numbers, Linguistic Variables, Arithmetic Operations

on Intervals & Numbers, Lattice of Fuzzy Numbers, Fuzzy Equations.
UNIT-V.Fuzzy Logic: Classical Logic, Multivalued Logics, Fuzzy Propositions, Fuzzy

Qualifiers, Linguistic Hedges. Uncertainty based Information: Information &
Uncertainty, Nonspecificity of Fuzzy & Crisp Sets, Fuzziness of Fuzzy Sets. Genetic
Algorithms, Scope & application areas, solution of 0-1Knapsack problem using GA
REFERENCES
1. “Fuzzy sets and Fuzzy Logic: Theory and applications”,G.J. Klir,B.Yuan, PHI
2. “Introduction to Fuzzy sets and Fuzzy Logic”, M.Ganesh , PHI
3. “An Introduction to Fuzzy Control”, D Driankov, H Hellendoorn, M Reinfrank,
Narosa Publishing Company
4. “ Neural Networks: A classroom approach”, Satish Kumar , Tata McGraw Hill
5. Haykin S., “Neural Networks-A Comprehensive Foundations”, Prentice-Hall
International, New Jersey, 1999.
Web Technology & Information Retrieval(GEC-4)
Sessional: 25 Marks
UNIT 1. Web Server Technology: Web’s Robot global access to information, HTML, HTTP,
Accessing a web server, publishing on web server, secure HTTP, Secure Sockets
Layer, WWW Proxies, IIS, Case study of apache web server.
UNIT 2 .Web search basics:Background and history,Anatomy of WWW, Web

characteristics, Spam, The web graph, The Web Search Users, search engines,
architecture of search engines, search tools, DNS resolution, The URL frontier, Link
analysis, PageRank,
UNIT 3. Web Crawlers: Basics of Web crawling, Various crawling techniques , incremental
crawler, parallel crawler, distributed crawlers, focused crawler, agent based crawler, Hidden
web Crawler
UNIT 4. Introduction to Information Retrieval: Information retrieval problem, an inverted

index, Processing Boolean queries, The extended Boolean model versus ranked retrieval, an
inverted index, Bi-word indexes, Positional indexes, Combination schemes
UNIT 5. Index construction: Hardware basics, Blocked sort-based indexing, Single-pass in-
memory indexing, Distributed indexing, Dynamic indexing, Other types of indexes Index
compression: Statistical properties of terms in information retrieval, Heaps’ law: Estimating
the number of terms, Zipf’s law: Modeling the distribution of terms, Dictionary compression,
Dictionary as a string, Blocked storage, Postings file compression.
Intellectual Property Rights(GEC-5)
Sessional: 25 Marks
No. of Credits: 3
Theory :75 Marks
L T P Total
Total :100
3 00 3
UNIT 1: Introduction to Intellectual Property: Concept of Intellectual Property, Kinds of
Intellectual Property, Economic Importance of Intellectual Property, Indian Theory on Private
Property: Constitutional Aspects of Property, Constitutional Protection of Property and
Intellectual Property, Economic Development and Intellectual Property Rights Protection
UNIT II: Introduction to Patents: Overview, Historical Development, Concepts: Novelty,

Utility, Patentable Subject-matter: Patent Act, 1970- Amendments of 1999, 2000, 2002 and
2005, Pharmaceutical Products and Process and Patent , Protection, Software Patents,
Business Method, Protection of Plant Varieties and Farmers’ Rights Act, 2001, Patenting of
Micro-organism
UNIT III: Procedure of Obtaining of Patents: Concepts of a Patent Application,,

Specification: Provisional, Complete, Disclosure Aspects, Claims: Principal, Dependant,
Omnibus, Examination of Application, Opposition of Application, Sealing of Patents
UNIT IV: Working of Patents – Compulsory License: Commercialization of Inventions:

License- Terms of License Agreement, Assignments of Patents, Revocation of Patents
UNIT V: Infringement: What is Infringement?, How is Infringement determined? Who is an

Infringer?, Direct, Contributory and Induced, Defences of Infringement:
5.2.1 Research Exemption, Invalidity, Misuse, Failure to mark, Laches and Estoppel and first
sale doctrine
References Books:
1. W.R. Cornish, Intellectual Property, Sweet & Maxwell, London (2000)
2. P. Narayana, Patent Law, Wadhwa Publication
3. Merges, Patent Law and Policy: Cases and Materials, 1996
4. Brian C. Reid, A Practical Guide to Patent Law, 2nd Edition, 1993
5. Brinkhof (Edited), Patent Cases, Wolters Kluwer.
6. Prof. Willem Hoyng & Frank Eijsvogels, Global Patent Litigation, Strategy and
Practice, Wolters Kluwer.
7. Gregory Stobbs, Software Patents Worldwide, Wolters Kluwer.
8. Feroz Ali Khader, The Law of Patents- With a special focus on Pharmaceuticals in
India, Lexis Nexis Butterworths Wadhwa, Nagpur.
9. Sookman, Computer Law, 1996
10. N.S. Gopalakrishnan & T.G. Agitha, Principles of Intellectual Property (2009). Eastern
Book Company, Lucknow.
Installation Testing & Maintenance of Electrical Equipments(GEC-6)
Sessional: 25 Marks
UNIT-1.Installation Of Electrical Equipements: Introduction Unloading of electrical

equipment at site Inspection Storage Foundation Alignment of electrical
machinesTools/Instruments necessary for installation Inspection, storage and handling of
transformer, switchgear and induction motor Preparation of technical report
UNIT-2.Commissioning And Testing:Tests before commissioning of electrical equipment

:Electrical and Mechanical test Specific tests on - transformer, induction motor, alternator,
synchronous power and electrical power installation Need of gradually loading of
Various Tests to be performed after commissioning and before starting the machine Various
instruments required for testing Commissioning of switchgear Test report on
commissioning and test certificate electrical equipment Preparations before commissioning of
power transformer Commissioning- power transformer, three phase induction motor
Transformer insulation oil: Properties as per IS, sampling, testing and filtering/purifying,
standard tests as per IS Measurement of insulation resistance of different
equipments/machines Methods of Drying the winding of electrical equipments and its
record Classification and measurement of insulation resistance, Polarization Index
Appropriate insulation test for specific purpose Factor affecting
UNIT-3.Maintenance Of Electrical Equipments: General aspect of maintenance,

Classification Preventive maintenance-concept, classification, advantages, activities,
functions of the Maintenance Department Breakdown maintenance-concept, advantages,
activities Reasons of failure of electrical equipment due to poor maintenance Factors for
preparing maintenance schedule Frequency of maintenance Maintenance schedule of
transformer below and above 1000kVA Maintenance schedule - induction motor, circuit
Breaker, overhead line, storage Battery Probable faults due to poor maintenance in
transformer, induction motor, circuit breaker, overhead lines and battery
UNIT-4.Trouble Shooting:Causes of fault in electrical equipments- Internal and external

Instruments and tools for trouble shooting Common troubles in electrical equipment – DC
Machines, AC Machines, Transformers, Circuit- breaker, under-ground cable, electrical
Installation Need of trouble shooting chart, advantages Trouble shooting chart – DC Motor,
DC Generator, Transformer, Synchronous Motor, Induction Motor, Circuit-breaker Trouble
shooting chart for Domestic appliances- electrical iron, ceiling fan, Washing machine,
Air cooler, Vacuum cleaner Fluorescent tube light: Construction, working and
troubleshooting chart
UNIT-5.Earthing:Necessity of earthing System earthing : advantage of neutral earthing of

generator in power station Equipment earthing: Objective Types of earth electrodesMethods
of earthing : plate earthing, pipe earthing and coil earthing Earthing in extra high voltage
and underground cable Earthing resistance- factor affecting Determination of maximum
permissible resistance of the earthing system Measurement of earth resistance: voltmeter-
ammeter method, earth tester method, ohm meter method and earth loop tester method
Define: earthing , grounding and bonding Comparison between equipment earthing and
system grounding Earthing procedure - Building installation, Domestic appliances,
Industrial premises Earthing in substation, generating station and overhead line
UNIT-6.Electrical Accidents And Safety: Causes of electrical accidents Factors affecting

the severity of electrical shock Actions to be taken when a person gets attached to live part
Safety regulations and safety measures Indian electricity supply act 1948- 1956 Factory act
1948 Procedure of shut down for substation and power lines Permit to work : certificate
of (i)requisition for shut down(ii) Permit to work and (iii)Line clear certificate
Instruction for the safety of persons working on a job with a permit to work Fire
extinguishers- For fixed installation and portable devices
REFERENCE/TEXT BOOKS:
1. Testing Commissioning operation and maintenance of Electrical Equipments by Rao
S, Khanna Publication (Latest edition)
2. Installation, commissioning & maintenance of Electrical equipments by Singh

TARLOK, S.K.Kataria & Sons, New Delhi, Second edition-2012
3. Electrical power system by Wadhwa C.L., New Age international Publications

Non-Conventional Energy Resources And Utilisation(GEC-7)
Sessional: 25 Marks
Theory :75 Marks
No. of Credits: 3
Total :100
L T P Total
3 00 3
UNIT 1. Energy resources and their utilization : Indian and global energy sources, Energy
exploited, Energy planning, Energy parameters (energy intensity, energy-GDP elasticity),
Introduction to various sources of energy, Solar thermal, Photovoltaic, Water power, Wind
energy, Biomass, Ocean thermal, Tidal and wave energy, Geothermal energy, Hydrogen
energy systems, Fuel cells, Decentralized and dispersed generation. Solar radiations: Extra
terrestrial radiation, Spectral distribution, Solar constant, Solar radiations on earth,
Measurement of solar radiations, Solar radiation geometry, Flux on a plane surface,
Latitude, Declination angle, Surface azimuth angle, Hour angle, Zenith angle, Solar
altitude angle expression for angle between incident beam and the normal to a plane
surface (no derivation), Local apparent time, Apparent motion of sun, Day length, Solar
radiation data for India.
UNIT 2 :Solar energy: Solar thermal power and it's conversion, Solar collectors, Flat plate,
Performance analysis of flat plate collector, Solar concentrating collectors, Types of
concentrating collectors, Thermodynamic limits to concentration, Cylindrical collectors,
Thermal analysis of solar collectors, Tracking CPC and solar swing. Solar thermal
energystorage, Different systems, solar pond. Applications, Water heating, Space heating &
cooling, Solar distillation, solar pumping, Solar Cooking, Green Houses, Solar Power plants,
solar photovoltaic system: Photovoltaic effect, Efficiency of solar cells, Semiconductor
materials for solar cells, Solar photovoltaic system, Standards of solar photovoltaic
system, Applications of PV system, PV hybrid System.
UNIT 3 : Biogas: Photosynthesis, Bio gas production, Aerobic and anaerobic bio-conversion
process, Raw materials, Properties of bio gas, Producer gas, Transportation of bio gas, bio
gas plant technology & status, Community biogas plants, Problems involved in bio gas
production, Bio gas applications, Biomass conversion techniques, Biomass gasification,
Energy recovery from urban waste, Power generation from liquid waste, Biomass
cogeneration, Energy plantation, Fuel properties, Biomass resource development in
India. Wind energy: Properties of wind, Availability of wind energy in India, wind
velocity, Wind machine fundamentals, Types of wind machines and their characteristics,
Horizontal and Vertical axis wind mills, Elementary design principles, Coefficient of
performance of a wind mill rotor, Aerodynamic considerations in wind mill design,
Selection of a wind mill, Wind energy farms, Economic issues, Recent development.
UNIT 4 : Electrochemical effects and fuel cells: Principle of operation of an acidic fuel cell,
Reusable cells, Ideal fuel cells, Other types of fuel cells, Comparison between acidic and
alkaline hydrogen-oxygen fuel cells, Efficiency and EMF of fuel cells, Operating
characteristics of fuel cells, Advantages of fuel cell power plants, Future potential of fuel
cells, Tidal power: Tides and waves as sources of energy, Fundamentals of tidal power, Use
of tidal energy, Limitations of tidal energy conversion systems.Hydrogen Energy: Properties
of hydrogen in respect of its use as source of renewable energy, Sources of hydrogen,
Production of hydrogen, Storage and transportation, Problems with hydrogen as fuel,
Development of hydrogen cartridge, Economics of hydrogen fuel and its use.
UNIT 5.Thermoelectric systems: Kelvin relations, power generation, Properties of

thermoelectric materials, Fusion Plasma Generators, Geothermal energy: Structure of earth's
interior, Geothermal sites, earthquakes & volcanoes, Geothermal resources, Hot springs,
Steam ejection, Principal of working, Types of geothermal station with schematic
representation, Site selection for geothermal power plants. Advanced concepts, Problems
associated with geothermal conversion. Ocean energy: Principle of ocean thermal energy
conversion, Wave energy conversion machines, Power plants based on ocean energy,
Problems associated with ocean thermal energy conversion systems, Thermoelectric
OTEC, Developments of OTEC, Economics. Impact of renewable energy generation on
environment, Kyoto Protocol, Cost of electricity production from different energy
sources, Energy options for Indian economy.
REFERENCE/TEXT BOOKS:
1. Bansal Keemann, Meliss,” Renewable energy sources and conversion technology", Tata
McGrawHill.
2. Kothari D.P., “Renewable energy resources and emerging technologies", Prentice Hall of
IndiaPvt.Ltd.
3. Ashok V. Desai, "Non conventional Energy", New Age International Publishers Ltd.
Utilization Of Electric Power And Traction(GEC-8)
Sessional: 25 Marks
UNIT-I :Illumination : Basic laws of illumination, illumination due to a strip and circular
disc, light sources and their characteristics, sources of light, design of lighting schemes,
incandescent lamp, sodium lamp, mercury lamp and fluorescent lamp, comparison of various
lamps.
UNIT-II. Electric Heating: Principle and application of resistance, induction , dielectric

heating and temperature control
UNIT-III. Electric Welding: Resistance welding, arc welding, welding generator and
welding transformer, properties of arcing electrode
UNIT-IV.Electrolyting Process: Principles and applications of electrolysis, Faraday‘s

law of electrolysis, electroplating, charging and discharging, capacity and efficiency
of battery, defects in battery.
UNIT-V.Electric Traction :Advantages of electric traction, requirements of an ideal traction

system, train movement, mechanism of train movement, traction motors, traction motor
control, multi unit control, braking of electric motors, thyristor control of electric traction
REFERENCE BOOKS:
1. Utilization of electric energy: Open Shaw Taylor; ELBS
2. Art and Science of Utilization of Electrical energy: H.Pratab; Dhanpat Rai
3. Generation, distribution and utilization of electric power: C.L. Wadhwa; Khanna
Publications
Microprocessor and Interfacing(GEC-15)
Sessional: 25 Marks
No. of Credits: 3
Theory :75 Marks
L T P Total
Total :100
3 00 3
UNIT1. Architecture of 8085: Functional block diagram—Registers, ALU, Bus systems.
Pin configuration, Timing and control signals, Machine cycle and timing diagrams.
Interrupts—Types of interrupt, interrupt structure.
UNIT2. Programming of 8085: Instruction format, Addressing modes, Instruction set.

Development of assembly language programs.
UNIT3. Interfacing Devices:(a).The 8255 PPI chip: Architecture, pin configuration, control
words, modes and Interfacing with 8085. (b). The 8254 PIC chip: Architecture, pin
configuration, control words, modes and Interfacing with 8085.
UNIT4. Interrupt and DMA controller: The 8259 Interrupt controller chip: Architecture, pin
configuration, control words, modes
UNIT5. Architecture of 8086: Functional block diagram of 8086, details of sub-blocks such
as EU, BIU,memory segmentation, physical address computations, pin configuration,
program relocation, Minimum and Maximum modes of 8086— Block diagrams and
machine cycles.
UNIT6. Programming of 8086: Instruction format, Addressing modes, Instruction set and
programs.
TEXT BOOKS:
1. Microprocessor Architecture, Programming & Applications with 8085: Ramesh S
Gaonkar; Wiley Eastern Ltd.
2. Microprocessor and applications – A.K.Ray. , TMH
REFERENCE BOOKS:
1. Microprocessors and interfacing : Hall; TMH
2. The 8088 & 8086 Microprocessors-Programming, interfacing,Hardware& Applications
:Triebel& Singh; PHI
3. Microcomputer systems: the 8086/8088 Family: architecture, Programming &Design :
Yu-Chang Liu & Glenn A Gibson; PHI.
4. Advanced Microprocessors and Interfacing :Badri Ram; TMH
Digital Signal Processing(GEC-16)
Sessional: 25 Marks
No. of Credits: 3
Theory :75 Marks
L T P Total
Total :100
3 00 3
UNIT1. DISCRETE-TIME SIGNALS: Signal classifications, frequency domain
representation, time domain representation, representation of sequences by Fourier
transform, properties of Fourier transform, discrete time random signals, energy and
power theorems.
UNIT2. DISCRETE-TIME SYSTEMS: Classification, properties, time invariant system,

finite impulse Response (FIR) system, infinite impulse response (IIR) system.
UNIT3. SAMPLING OF TIME SIGNALS:Sampling theorem, application, frequency

domain representation of sampling, reconstruction of band limited signal from its
samples. Discrete time processing of continuous time signals, changing the sampling
rate using discrete time processing.
UNIT4. Z-TRANSFORM: Introduction, properties of the region of convergence, properties

of the Z-transform, inversion of the Z-transform, applications of Z-transform.
UNIT5. BASICS OF DIGITAL FILTERS: Fundamentals of digital filtering, various types

of digital filters, design techniques of digital filters : window technique for FIR, bi-
linear transformation and backward difference methods for IIR filter design, analysis
of finite word length effects in DSP,FIR &IIR Filter structure-
direct1,direct2,cascadeand parallel, Application of DSP
TEXT BOOKS :
1. Digital Signal Processing :Proakis and Manolakis; PHI
2. Digital Signal Processing: Salivahanan, Vallavaraj and Gnanapriya;TMH
REFERENCE BOOKS:
1. Digital Signal Processing: Alon V. Oppenhelm;PHI
2. Digital Signal processing(II-Edition): Mitra, TMH
Instrumentation and Control(GEC-17)
Sessional: 25 Marks
No. of Credits: 3
Theory :75 Marks
L T P Total
Total :100
3 00 3
UNIT 1. OSCILLOSCOPE: Block diagram, study of various stages in brief,
high frequency CRO considerations. Sampling and storage oscilloscope.
UNIT 2. ELECTRONIC INSTRUMENTS: Instruments for measurement of voltage,

current & other circuit parameters, introduction to digital meters.
UNIT 3. GENERATION & ANALYSIS OF WAVEFORMS: Block diagram of pulse

generators, signal generators, function generators wave analysers, distortion analysers,
spectrum analyser, Harmonic analyser, introduction to power analyser.
UNIT 4. FREQUENCY & TIME MEASUREMENT: Study of decade counting

Assembly(DCA), frequency measurements, period measurements, universal counter,
introduction to digital meters.
UNIT 5. TRANSDUCERS: Classification, Transducers of types: RLC photocell,

thermocouples etc. basic schemes of measurement of displacement, velocity, acceleration,
strain, pressure, liquid level & temperature.
UNIT 6.CONTROL SYSTEM : Concept of transfer function, relationship between transfer

function and impulse response, order of a system, block diagram algebra, signal flow graphs :
Mason’s gain formula & its application, characteristic equation, derivation of transfer
functions of electrical and electromechanical systems. Transfer functions of cascaded
and non-loading cascaded elements.
TEXT BOOK:
1. A course in Electrical & Electronics Measurements &Instrumentation :A.K.Sawhney;

DhanpatRai& Sons.
2. Control System Engineering : I.J.Nagrath&M.Gopal; New Age
3. Modern Control Engg : K.Ogata; PHI.
REFERENCE BOOKS.
1. Electronics Instrumentation & Measurement Techniques : Cooper; PHI.
Data Communication and Networking(GEC-18)
Sessional: 25 Marks
UNIT1. Introduction : Data Communication, Networks, Internet, Intranet, Protocols, OSI &
TCP/IP Models Addressing. Physical Layer – Signals, Analog, Digital, Analog VS
Digital, Transmission impairment, Data Rate Limits, Performance. Digital
Transmission – Line Coding (Umipolar, Polar, Biphase), Block Coding (4B/5B
Encoding), Analog to digital conversion, PCM, Transmission Modes. Analog
Transmission – Digital to analog conversion (ASK, FSK, PSK, QAM), Analog to
Analog conversion. Multiplexing – FDM, WDM, Synchronous TDM (time slots &
frames, interleaving, data rate management). Spread Spectrum – FHSS, DSSS
Transmission Media – Guided and Unguided. Switching – Switching, Circuit-
Switched Networks, Datagram networks, Concept of Virtual circuit networks,
structure of circuit and packet switch. Concepts of DSL and ADSL.
UNIT 2. Data Link Layer : Error correction & detection. Types of errors. Detection VS
Correction, Block Coding, Hamming Distance, Linear Block codes (single parity
check, hamming codes), Cyclic codes, CRC Encoder & Decoder, DRC Polynomial
and its degree, Checksum.
UNIT 3.Network layer protocol : Internetworking,IPv4, IPv4 protocol packet format, IPv6
Protocol & Packet format, IPv4 VS IPv6, Transition from IPv4 to IPv6,Address
Resolution protocols (ARP, RARP), BOOTP, DHCP, Routing Protocols – Delivery,
forwarding, routing, types of routing, routing tables, Unicast Routing, Unicast
Routing protocols, RIP, Concepts of OSPF, BGP & Multicast Routing Transport
Layer – Process to process delivery, UCP, TCP Congestion Control & Quality of
Service – Data traffic, Congestion, Congestion Control (Open Loop, Closed Loop &
Congestion control in TCP), QoS and Flow Characteristics Application Layer – DNS,
Remote Logging (Telnet), SMTP, FTP, WWW, HTTP
Soft Skills for Engineers (GEC-19)
Sessional: 25 Marks
No. of Credits: 3
Theory :75 Marks
L T P Total
Total :100
3 00 3
Unit-I- CORPORATE INTERACTION, LEADERSHIP & COMMUNICATION

Part I.Audio/Video Lessons and Observation/Listening Skills
(Practical)Interviews Lectures by Eminent Engineers, scientists and technocrats.
Other inspiring speeches on social issues as well as related to the corporate world
and industry.
Part-II.Group Discussions, Corporate Dialogue/Role Play (conflict and
resolution);Mock-interviews.Discussions with briefs on CSR and IPR and role
of important international bodies like WTO and IMF; Presentations;
Technical/Business vocabulary; Body Language.
Part-III: Leadership & Participation:Review of social, political and corporate
scene; Leadership skills, Attitudes, Sensitivity training.Learning/’Take-aways’ from
scenarios/situations. Crisis-handling; Negotiation-Conflict resolution
exercises; Communication Skills; Seven Cs of Communication; Barriers of/to
Effective Communication
Unit –II- CREATIVE COMPOSITION& TECHNICAL WRITING : Exercises in

creative writing:USP and image building; Setting Goals; Charting Objectives;
Minutes of a Meeting; Reports; Interoffice Memorandum; Resume and
Covering Letter.
Unit –III- SEMANTICS & SYNTAX : Idioms & Proverbs, Vocabulary building,
Crosswords, Neologisms, Portmanteau words, Correct sentences/usage.
Unit-IV- DISSERTATION & PRACTICAL ASSESSMENT :Short Multimedia
Dissertation on any topic of student’s interest; Group Discussion and Mock-
interview .
Resources
 Stephen Robbins and Seema Sanghi.Organizational Behaviour. Pearson. Latest
edition.
 Kotler, Philip and Kevin Lane Keller.Marketing Management. 13 th edition.2008
Eastern Economy Edition
 Wehmeier, Sally.Oxford Advanced Learner’s Dictionary. Oxford UP.2005
 Ghosh, BN. Managing Soft Skills for Personality Development.Tata McGraw-Hill
2012
 Rizvi, M Ashraf. Effective Technical Communication. Tata Mc Graw-Hill.2005
 Bretag, Crossman and Bordia.Communication Skills. Tata Mc Graw-Hill.2009
 Sites: Youtube and Wikipedia in general.
Maths-III(GEC-20)
Sessional: 25 Marks
No. of Credits: 3
Theory :75 Marks
L T P Total
Total :100
3 00 3
UNIT 1.Fourier Series and Fourier Transforms : Euler’s formulae, conditions for a Fourier
expansion, change of interval, Fourier expansion of odd and even functions, , half range
sine and cosine series. Fourier expansion of square wave , rectangular wave, saw-
toothed wave, half and full rectified wave, Fourier integrals. Fourier transforms, Shifting
theorem (both on time and frequency axes), Fourier transforms of derivatives, Fourier
transforms of integrals, Convolution theorem. application of fourier transform to solve
standard equations/boundary value problems. Applications of fourier transform for solution
of standard equations/boundary value problems.
UNIT2.Functions of Complex Variable : Definition, Exponential function, Trigonometric and

Hyperbolic functions, Logarithmic functions, Limit and Continuity of a function,
Differentiability and Analyticity. Cauchy-Riemann equations, necessary and
sufficient conditions for a function to be analytic, polar form of the Cauchy-
Riemann equations. Harmonic functions,Milne Thomson Method to find harmonic
conjugate of a function. application to flow problems. Integration of complex functions.
Cauchy- Integral theorem and formula.Power series,radius and circle of convergence,
Taylor's, Maclaurin's and Laurent's series.Zeroes and singularities of complex functions,
Residues. Cauchy’s residue theorem,Evaluation of real integrals using residues (around unit
and semi circle only).
UNIT 3.Probability Distributions : Conditional probability, Bayes theorem and its

applications, expected value of a random variable. Properties and application of Binomial,
Poisson and Normal distributions.
Unit 4: Linear Programming: Linear programming problems formulation, solving linear
programming problems using (i) Graphical method(corner point,iso cost/iso profit) (ii)
Simplex method (iii) BIG M method (iv) Duality concept and Dual simplex method.
TEXT BOOKS :
1. Higher Engg. Mathematics : B.S. Grewal.
2. Advance Engg. Mathematics : R.K. Jain, S.R.K.Iyenger
REFERENCE BOOK
1. Advanced Engg. Mathematics : F Kreyszig.
2. Advanced Engg. Mathematics : Michael D. Greenberg.
3. Operation Research : H.A. Taha.
4. Probability and statistics for Engineers : Johnson. PHI
Human Resource Management(GEC-21)
Sessional: 25 Marks
No. of Credits: 3
Theory :75 Marks
L T P Total
Total :100
3 00 3
UNIT I : Human Resource Management: concept and scope; Roles, responsibilities and
competencies of HR manager; Challenges to HR professionals; Human Resource Planning &
Forecasting: significance and process.
UNIT II :HR Sourcing: Recruitment, Selection and Induction. Job Analysis: job Description
and job Specification; Job Design: concept and methods; Job Evaluation-concept
&methods; Performance appraisal and counselling.
UNIT III :Training: training process and methods; Career planning and Development;
Succession planning; Employee Compensation: basic concepts & determinants;
UNIT IV: Industrial Relations and Grievance Handling; Employee welfare; Dispute
Resolution; International Human Resource Management; Contemporary Issues in HRM. HR
Audit &Accounting, ethics & corporate social responsibility.
Suggested Readings:
1. K. Aswathapa Human resource Management: Text and cases, 6 th edition, Tata
McGraw Hill, New Delhi,2012
2. Uday Kumar Haldar &Juthika Sarkar(2012) Human resource Management New
Delhi, Oxford University Press.
3. De Cenvo, Da & Robbins S.P.(2010) Fundamentals of Human Resource
Management, 9th edition, New York, John Wiley & Sons.
4. Gary Dessler (2008) Human Resource Management, 11 th edition New Delhi: Pearson
Prentice Hall.
5. Tanuja Agarwala, Strategic Human resource Management, Oxford University Press
2007.
Financial Management(GEC-22)
Sessional: 25 Marks
No. of Credits: 3
Theory :75 Marks
L T P Total
Total :100
3 00 3
UNIT-I :Financial management-scope finance functions and its organisation, objectives of

financial management; time value of money; sources of long term finance.
UNIT-II Investment decisions: importance, difficulties, determining cash flows, methods of

capital budgeting; cost of different sources of raising capital; weighted average cost of
capital.
UNIT-III:Capital structure: Meaning, importance, determinants and Theories. Financial and

operating leverage; EBIT/EPS Analysis, determinants of dividend policy and dividend
models -Walter, Gordon & M.M. models.
UNIT-IV:Working Capital- meaning, need, determinants; estimation of working capital need;

management of cash, inventory and receivables.
Suggested Readings:
1. Pandey, I.M., Financial Management, Vikas Publishing House, New Delhi 10th edition
2010
2. Khan M.Y, and Jain P.K., Financial Management, Tata McGraw Hill, New Delhi
3. Keown, Arthur J., Martin, John D., Petty, J. William and Scott, David F,
FinancialManagement, Pearson Education
4. Chandra, Prasanna, Financial Management, TMH, New Delhi
5. Van Horne, James C., Financial Management and Policy, Prentice Hall of India
6. Brigham & Houston, Fundamentals of Financial Management, Thomson Learning,
Bombay.
7. Kishore, R., Financial Management, Taxman’s Publishing House, New Delhi
Marketing Management(GEC-23)
Sessional: 25 Marks
No. of Credits: 3
Theory :75 Marks
L T P Total
Total :100
3 00 3
UNIT-I:Nature and scope of marketing; Philosophies of marketing management; marketing

environment; marketing research and marketing information system; Ethical issues in
marketing
UNIT-II: Understanding consumer behaviour; factors influencing consumer buying

behaviour and organizational buying behaviour; market segmentation, targeting and
positioning; marketing strategies in the different stage of the product life cycle; new
product development process
UNIT-III: Introduction to Product mix and product line decisions; branding and packaging
decisions; Pricing strategies and practices; factors affecting selection of marketing
channels; Introduction to wholesaling and retailing; Introduction to Promotion Mix:
Advertising, sales promotion, public relations, personal selling
UNIT-IV :Sales Forecasting Methods; Introduction: Green Marketing; Event Marketing;

Direct marketing; Network Marketing; Holistic Marketing; Permission Marketing; Social
Marketing
Suggested Readings:
1. Kotler and Armstrong,Principles of Marketing; PHI, New Delhi
2. Kotler, Philip, Kevin Keller, A. Koshy and M. Jha, Marketing Management in South Asian
Perspective , Pearson Education, New Delhi
3 . Kerin, Hartley, Berkowtz and Rudelius, Marketing, TMH, New Delhi
4. Etzel, Michael J, Marketing: Concepts and Cases, TMH, New Delhi
5. Kumar,Arun and Meenakshi,N. ,Marketing Management, Vikas Publication
Entrepreneur Development(GEC-24)
Sessional: 25 Marks
No. of Credits: 3
Theory :75 Marks
L T P Total
Total :100
3 00 3
UNIT I : Concept of Entrepreneur, Characteristics, qualities and pre-requisites of

entrepreneur, entrepreneurship and intrapreneur, Entrepreneur vs. Manager; Economic,
social and psychological need for entrepreneurship;
UNIT II :Environmental Factors affecting success of a new business, Formulation of business

plan, Contents and significance of business plan
UNIT III: Feasibility Study -Preparation of Feasibility Reports: Economic, Technical,

Financial and Managerial Feasibility of Project, Methods and procedures to start and expand
one's own business
UNIT IV: Role of Government and Promotional agencies in entrepreneurship development,

Entrepreneurship Development Programmes
Reference Books:
 Khanka S.S., “Entrepreneurship Development”. S.Chand.
 Desai, A N. "Entrepreneur & Environment". 1990. Ashish, New Delhi.
 Drucker, Peter. "Innovation and Entrepreneurship". 1985. Heinemann, London.
 Jain Rajiv. "Planning a Small Scale Industry: A Guide to Entrepreneurs". 1984. S.S.
Books, Delhi.
 Kumar, S A. "Entrepreneurship in Small Industry". 1990, Discovery, New Delhi.
 McClelland, D C and Winter, W G. "Motivating Economic Achievement". 1969. Free
Press, New York.
 Pareek, Udai and VenkateswaraRao, T. "Developing Entrepreneurship -A Handbook
on Learning Systems". 1978, Learning Systems, Delhi.
Principal of Marketing and Management(GEC-25)
Sessional: 25 Marks
No. of Credits: 3
Theory :75 Marks
L T P Total
Total :100
3 00 3
UNIT-I :Introduction: concept, nature and significance of management; Functions of

management, Levels of management and Managerial skills required at various levels,
concept and process of human resource management, concept of marketing management and
marketing mix, concept and major decisions of financial management.
UNIT-II: Process and types of planning, decision making process, basic issues in organizing
types of organisation structure, delegation of authority and responsibility,
departmentalisation, decentralization, span of management, line and staff relationship.
UNIT-III: Leadership styles/behaviours, leadership vs management; personal characteristics

of effective leaders, theories of motivation; Maslow’s Theory, Theory X and Y, Herzberg
theory. management control – concept and process, managerial ethics and social
responsibility
UNIT IV: Introduction to economics: micro vs macro economics. Relationship between

science, engineering, technology and economic development. Meaning of Demand, Law of
Demand, Elasticity of Demand. Law of Supply, Price equilibrium.
UNIT-V: Types of costs. Production function, Laws of production. Economies and

diseconomies of scale. Market; types of market. Price equilibrium in perfect competition,
monopoly, monopolistic competition, oligopoly.
General Elective Course offered by Mechanical Engg. Department for students of
other Department (Not allowed for ME Deptt. Students):

1 GEC-9 Industrial Engineering
2 GEC-10 Total Quality Management
3 GEC-11 Solid Waste
4 GEC-12 Product Design and Development
5 GEC-13 Robotics Engineering
6 GEC-14 Power Plant Engineering
Industrial Engineering(GEC-9)
Sessional: 25 Marks
No. of Credits: 3
Theory :75 Marks
L T P Total
Total :100
3 00 3
UNIT 1. Basic Concepts of Industrial Engineering: Definition, Objectives, Method study,
Principle of motion economy, Techniques of method study - Various charts,
THERBLIGS, Work measurement - various methods, Time Study - PMTS,
determining time, Work sampling, Numerical Problems.
UNIT 2. Productivity, Workforce & Information Management: Productivity

Definition, Various methods of measurement, Factors effecting productivity,
Strategies for improving productivity, Various methods of Job evaluation &
merit rating, Various incentive payment schemes, Organizational & information
system structure,
UNIT 3. Manufacturing Cost Analysis: Fixed & variable costs, Direct, indirect &
overhead costs, & Job costing, Recovery of overheads, Standard costing, Cost
control, Cost variance Analysis - Labour, material, overhead in volume, rate &
efficiency, Break even Analysis, Numerical Problems.
UNIT 4. Materials Management : Strategic importance of materials in manufacturing

industries, Relevant costs, Inventory control models - Economic order quantity
(EOQ), Economic batch quantity (EBQ) with & without shortage, Inventory
control systems - P,Q,Ss Systems,determination of order point & safety stock,
Selective inventory control - ABC, FSN, SDE, VED,SCM , Numerical Problems.
UNIT 5. Sales Forecasting: Importance, Objectives, Forecasting and Prediction, Types,

Classification of Forecasting Methods, Forecast Errors, Costs and Accuracy of
Forecasts, Numerical Problems.
UNIT 6. Entrepreneurship : Planning a New Business Venture, Small-scale Industries,

Government Policies for Small-scale Industries, Project Identification and Project
Formulation, Project Appraisal, Laws Concerning Entrepreneurs, Role of Various
National and State Agencies that Render Assistance to Small-scale Industries.
Text Books
1. Production & Operations Management – Chary, TMH, New Delhi.
2. Management Information Systems - Sadagopan, PHI New Delhi.
Reference Books
1. Modern Production Management – S.S. Buffa, Pub.- John Wiley.
2. Operations Management - Schroeder, McGraw Hill ISE.

4. Operation Management - Monks, McGraw Hill ISE.
5.
4. Production & Operations Management - Martinich, John Wiely SE.
6. Industrial & Systems Engineering - Turner, MIZE, CHASE, Prentice Hall Pub.
7.
7. Industrial Engineering & Operations Management – SK Sharma, Pub-S. K. Kataria
8.
7. Industrial Engineering – Ravi Shankar, Galgotia Pub.
Total Quality Management (GEC-10)
Sessional: 25 Marks
UNIT 1: Introduction : Quality – Basic concepts, dimensions, economics of quality, quality

Gurus.TQM: Definition, evolution, journey from inspection to TQM, comparison at different
stages, dimensions of TQM, TQM viewpoints, reasons for adopting TQM.
UNIT 2: Introspection to TQM environment: Sphere of TQM, components of TQM, TQM

Managing Total Quality, Factors affecting TQM environment, Classification and interaction
among factors, Researchers’ viewpoint, TQM as a system, steps in TQM implementation,
Roadblocks in TQM implementation, Reasons for TQM failure.
UNIT 3:Role of soft options in TQM :Hard vs. Soft factors, Role and expectation of
employer, employee, customer and supplier from organization and vice versa. Human factors
in TQM, Role of top management commitment, work culture, motivation, coordination,
attitude, innovation.
UNIT 4:Quality initiatives in organizations :Role of tools and techniques in TQM,

Classification of tools and techniques – Problem identification, Data analysis, Graphical,
Creativity, Company wide. Brief description of Quality awards – MBNQA, Deming award,
European quality award, Australian quality award.
UNIT 5: TQM Effectiveness : Impact of TQM, Need and difficulty in measuring TQM effect,
Parameters governing effect of TQM .
Reference books:
7) “Total Quality Management” by Oakland (Butterworth – Heinamann Ltd.)

8) “Managing for total quality from Deming to Taguchi and SPC” by Logothetis N.
(PHI)
9) “Total Quality Control” by Feigenbaum A.V. (MGH)
10) “Total Quality Management” by Besterfield Dale H (Pearson Education)
11) “A slice by slice guide to TQM” by John Gilbert (Affiliated East West Press)
12) “The TQM toolkit – a guide to practical techniques for TQM” by Waller Jenny, Allen
Derek and Burna Andrew (Kogan Page)
Solid Waste(GEC-11)
Sessional: 25 Marks
No. of Credits: 3
Theory :75 Marks
L T P Total
Total :100
3 00 3
UNIT I : Sources And Types Of Municipal Solid Wastes :Sources and types of solid wastes -
Quantity – factors affecting generation of solid wastes; characteristics – methods of sampling
and characterization; Effects of improper disposal of solid wastes – public health effects.
Principle of solid waste management – social & economic aspects; Public awareness; Role
of NGOs; Legislation.
UNIT II : On-Site Storage & Processing :On-site storage methods – materials used for
containers – on-site segregation of solid wastes – public health & economic aspects of storage
– options under Indian conditions – Critical Evaluation of Options
UNIT III : Collection And Transfer :Methods of Collection – types of vehicles –

Manpower requirement – collection routes; transfer stations – selection of location, operation
& maintenance; options under Indian conditions.
UNIT IV : Off-Site Processing :Processing techniques and Equipment; Resource recovery

from solid wastes – composting, incineration, Pyrolysis - options under Indian conditions.
UNIT V : DISPOSAL :Dumping of solid waste; sanitary land fills – site selection, design and
operation of sanitary landfills – Leachate collection & treatment.
Text Books/Reference Books:

1. George Tchobanoglous et.al., “Integrated Solid Waste Management”, McGraw-Hill
Publishers, 1993.
2. B.Bilitewski, G.HardHe, K.Marek, A.Weissbach, and H.Boeddicker, “Waste
Management”, Springer, 1994
3. Manual on Municipal Solid Waste Management, CPHEEO, Ministry of Urban
Development, Government of India, New Delhi, 2000
4. R.E.Landreth and P.A.Rebers, “Municipal Solid Wastes – problems and Solutions”,
Lewis Publishers, 1997.
5. Bhide A.D. and Sundaresan, B.B., “Solid Waste Management in Developing
Countries”, INSDOC, 1993
Product Design and Development(GEC-12)
Sessional: 25 Marks
No. of Credits: 3
Theory :75 Marks
L T P Total
Total :100
3 00 3
UNIT 1. Introduction: Design theory, design materials, human factors in design, man-
machine system, applied ergonomics, characteristics of successful product
development, challenges to product development.
UNIT 2.Development process and product planning: Generic development process, Concept
development, product development process flows, product planning process,
identify customer needs.
UNIT 3. Product specifications and concept generation: Product specification, steps to
establish the target specifications, Concept generation, five step concept generation
method, concept selection, concept screening, concept testing, product architecture
UNIT 4. Product design methods: Creative and rational, clarifying objectives - the objective
tree method, establishing functions- the function analysis method, setting
requirements – the performance specification method, determining characteristics –
the QFD method, generating alternatives – morphological chart method, evaluating
alternatives – the weighted objective method, improving details – the value
engineering method and design strategies.
UNIT 5. Design for manufacture: Estimating manufacturing cost, reducing component,
assembly and support costs, design for assembly, design for disassembly, design for
environment, design for graphics and packaging, effective prototyping – principle
and planning
UNIT 6. Industrial design: Its need, impact and quality, industrial design process and its
management, legal issues in product design, design resources, economics and
management of product development projects.
UNIT 7. Prototyping: Basics and principles of prototyping, prototyping technologies,
planning for prototypes
Text Books
1. K.T. Ulrich and S.D. Eppinger, “Product design and development”, Tata McGraw
Hill
2. Chitale & Gupta, “Product Development”, Tata McGraw Hill
3. Monks, J. G., “Operations Management”, McGraw Hill, 1997.
4. George Dietor, A material and Processing approach, McGraw Hill
Power Plant Engineering (GEC-13)
Sessional: 25 Marks
UNIT 1. Introduction: Energy resources and their availability, types of power plants,
selection of the plants, review of basic thermodynamic cycles used in power plants.
UNIT 2. Hydro Electric Power Plants : Rainfall and run-off measurements and plotting of
various curves for estimating stream flow and size of reservoir, power plants
design, construction and operation of different components of hydro-electric power
plants, site selection, comparison with other types of power plants.
UNIT 3. Steam Power Plants: Flow sheet and working of modern-thermal power plants,
super critical pressure steam stations, site selection, coal storage, preparation, coal handling
systems, feeding and burning of pulverized fuel, ash handling systems, dust collection-
mechanical dust collector and electrostatic precipitator.
UNIT 4. Combined Cycles: Constant pressure gas turbine power plants, Arrangements of
combined plants ( steam & gas turbine power plants ), re-powering systems with gas
production from coal, using PFBC systems, with organic fluids, parameters
affecting thermodynamic efficiency of combined cycles. Problems.
UNIT 5. Nuclear Power Plants: Principles of nuclear energy, basic nuclear reactions,
nuclear reactors-PWR, BWR, CANDU, Sodium graphite, fast breeder,
homogeneous; gas cooled. Advantages and limitations, nuclear power station,
waste disposal.
UNIT 6. Power Plant Economics: load curve, different terms and definitions, cost of
electrical energy, tariffs methods of electrical energy, performance & operating
characteristics of power plants- incremental rate theory, input-out put curves,
efficiency, heat rate, economic load sharing, Problems.
UNIT 7. Non-Conventional Power Generation: Solar radiation estimation, solar

energy collectors, low, medium & high temperature power plants, OTEC, wind
power plants, tidal power plants, geothermal power plants.
UNIT 8. Direct Energy Conversion Systems: Fuel cell, MHD power generation-principle,
open & closed cycles systems, thermoelectric power generation, thermionic power
generation.
Text Books
1. Power station Engineering and Economy by Bernhardt G.A. skrotzki and William A.
Vopat – Tata Mc Graw Hill Publishing Campany Ltd., New Delhi
2. Power Plant Engineering: P.K. Nag Tata McGraw Hill second Edition 2001.
Robotics Engineering(GEC-14)
Sessional: 25 Marks
UNIT 1 . Introduction: Automation and Robotics, Historical Development, Definitions,

Basic Structure of Robots, Specifications of Robots, Robot Anatomy, Complete
Classification of Robots, Fundamentals about Robot Technology, Factors related to use
Robot Performance, Basic Robot Configurations and their Relative Merits and Demerits,
Types of Drive Systems and their Relative Merits, the Wrist & Gripper Subassemblies.
UNIT 2. Control of Robots: Concepts and Model about Basic Control System,
Transformation and Block Diagram of Spring Mass System, Control Loops of Robotic
Systems, PTP and CP Trajectory Planning, Different Types of Controllers, Control
Approaches of Robots.
UNIT3. . Kinematics of Robot Manipulator: Introduction, General Description of Robot
Manipulator, Mathematical Preliminaries on Vectors & Matrices, Homogenous
Representation of Objects, Robotic Manipulator Joint Co-Ordinate System, Euler Angle &
Euler Transformations, Roll-Pitch-Yaw(RPY) Transformation, Relative Transformation,
Direct & Inverse Kinematics’ Solution, D H Representation & Displacement Matrices
for Standard Configurations, Geometrical Approach to Inverse Kinematics. Homogeneous
Robotic Differential Transformation: Introduction, Jacobian Transformation in Robotic
Manipulation.
UNIT4 . Robotic Workspace & Motion Trajectory: Introduction, General Structures of
Robotic Workspaces, Manipulations with n Revolute Joints, Robotic Workspace Performance
Index, Extreme Reaches of Robotic Hands, Robotic Task Description.
UNIT5 . Robotic Motion Trajectory Design: Introduction, Trajectory Interpolators, Basic
Structure of Trajectory Interpolators, Cubic Joint Trajectories. General Design Consideration
on Trajectories:- 4-3-4 & 3-5-3 Trajectories, Admissible Motion Trajectories.
UNIT6 .Industrial Applications: Objectives, Automation in Manufacturing, Robot
Application in Industry, Task Programming, Goals of AI Research, AI Techniques, Robot
Intelligence and Task Planning, Modern Robots, Future Application, Challenges and Case
Studies.
Text Books/ Reference Books:
1. A Robot Engineering Textbook – Mohsen Shahinpoor – Harper & Row publishers,
New York.
2. Robotics, control vision and intelligence, Fu, Lee and Gonzalez. McGraw Hill.
3. Introduction to Robotics, John J. Craig, Addison Wesley Publishing.
4. Robotics for Engineers , Yoram Koren, McGraw Hill International.
5. Industrial Robotics, Groover, Weiss, Nagel, McGraw Hill International.
6. Company Fundamentals of Robotics Analysis and Control, Schilling, PHI.
7. Introduction to Robotics, Niku, Pearson Education, Asia.
8. Robotics, control vision and intelligence, Fu, Lee and Gonzalez. McGraw Hill

Mtech Syllabus 2017-18

Uploaded by

Copyright:

Available Formats

Mtech Syllabus 2017-18

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Mtech Syllabus 2017-18

Uploaded by

Copyright:

Available Formats

SCHEME & SYLLABI

DEPARTMENT OF MECHANICAL ENGINEERING

Y.M.C.A. UNIVERSITY OF SCIENCE AND

“YMCA University of Science and Technology aspires to be a nationally and

 To contribute to the development of science and technology by synthesizing teaching,

1. an ability to apply knowledge of manufacturing technology and automation in practice

PROGRAM SPECIFICOUTCOMES (PSO):

[1] an ability to apply knowledge and skill of various approaches in manufacturing

Course Type : No. of courses

MMA-605-A Mechatronics 4-0-0 4 25 75 PCC

MMA-607-A Design Planning & 4-0-0 4 25 75 PCC

MMA-611-A Welding lab 0-0-2 1 15 35 PCC

MMA-613-A Mechatronics Lab 0-0-2 1 15 35 PCC

Subject Subject Name L-T-P Credits Marks Category Code

Subject Subject Name L-T-P Credits Marks Category

Subject Code Subject Name L-T-P Credits Marks Category

General elective Course

Courses offered by Computer Engg. Dept

Courses offered by Electrical Engg. Dept

 Courses offered by HAS Dept

 Courses offered by MBA Dept

Mandatory Audit Courses (MAC)

Marks % Grade Grade points Category

Percentage calculation= CGPA * 9.5

 Design of pattern for a particular component to be manufactured

No. of Credits: 4 Sessional: 25 Marks

1. Modern Welding Technology: by Howard B. Cary and Scott C. Helzer, (Pearson

NPTEL Video Lecture ,Web: http://nptel.ac.in, Welding Distortion

To study essential concepts of a system model in a mechanical system. To study interfacing

NPTEL Video Lecture , Web: http://nptel.ac.in, Mechatronics Engineering

No. of Credits: 4 Sessional: 25 Marks

Unit 5. Element of monitoring and follow up.

 Develop life cycle approach to new product development and production

• Estimating production requirement using various forecasting techniques.

No. of Credits: 1 Sessional: 15 Marks

List of Experiments in Welding

1. To study Heat flow in Welding

2. To study Bead Geometry, Hardness of Bead, Microstructure of welding

ii) SAW Welding

iii) FCAW Welding

(By changing electrode diameter & carriage speed)

3. To conduct under water welding ( to study bead shape & microstructure)

No. of Credits: 1 Sessional: 15 Marks

No. of Credits: 4 Sessional: 25 Marks

 Understand the effect of chip on quality of machine surface.

o Understand 2-D and 3-D transformations of different object based on

o Understand the various types of curves

o Develop a part program using CNC Part Programming.

o Analyze a part program using APT language.

o Understand the applications of various CAPP techniques /methods.

MMA-608-A-1 : INDUSTRIAL INSPECTION

No. of Credits: 4 Sessional: 25 Marks

UNIT 3: Surface textures: components of machined surface texture, specification of surface

UNIT 4:Geometrical and positional tolerances

1. Metrology:- I .C. Gupta (Dhanpat Rai Pub.)

No. of Credits: 4 Sessional: 25 Marks

UNIT 3. Prediction and control of distortion: calculation of longitudinal contraction,

UNIT 4. Residual stresses: introduction, types, effect of thermal stresses, control of

UNIT 7. Weldability of metals: welding techniques, preparation of joints and electrode

UNIT 8. Welding metallurgy: thermal effect of welding on parent metal, structure of