Atlas Copco Surface drill rig

LM 100
Technical specification

The small master

1. Proven surface air drill rig with outstanding performance
2. Economic and reliable
3. Compact in size and simple mechanical air control system

LM 100 is intended for construction, quarrying and open pit mining. The main components are:
• Pneumatic-operated hydraulic power pack for hydraulic cylinders
• Pneumatic-powered traction motors with gear and chain drive
• Track chains with 204 mm track shoes
• Mechanical track oscillation
• De-clutching crawler drive mechanism
• Towing hook
• 7 bar and 12 bar air line and oil lubrication system
• Single section boom system
• Pneumatic-operated chain feed for 3 000 mm (10ft.) drill tubes
• Manual drill steel support
• Feed extension
• Feed repining for toe hole drilling
• Side-mounted fixed drilling control panel
• Side-mounted tramming and positioning controls
• Extra air outlet for cleaning or running air tools (e.g. grinding equipment)

Hole range
Pipe size Recommended hole range
76 3” 102-115 mm 4” - 4 1/2”
Specifications LM 100

Carrier Steel feed

• Tramming speed, max......................... 3.2 km/h 2 mph Pneumatic-driven chain feed
• Traction force, max.............................. 17 kN 3 821 lbf • Feed extension.....................................750 mm 29.4”
• Track oscillation.................................. ±20° • Feed rate, max..................................... 0.3 m/s 59 ft/min
• Ground clearance................................. 225 mm 8.9” • Feed force, max...................................21 kN. 4 720 lbf
• Hill climbing ability 30 deg max. (w/o compressor) • Tractive pull, max................................15 kN. 3 372 lbf
• Total length..........................................5 130 mm 202”
• Travel length........................................3 565 mm 140.4”
Volumes

• Hydraulic oil tank................................ 22 l 5.8 US gal

• Hydraulic system, total........................ 22 l 5.8 US gal
• Traction gear........................................ 2 l 0.53 US gal
• Lubrication tank (HECL).................... 7.6 l 2 US gal

All performance parameters above are valid for 7 bar air pressure

Transport dimensions
Height and length Transport dimensions

Tramming position
Height 1 720 mm 5’8”

1760
1940
Length 5 120 mm 201 1/2”

204
Transportation position
Height 2 325 mm 7’7 1/2” 5120

Length 5 120 mm 16’9 1/2”

Width 1 940 mm 6’4 1/2”

Weight

2325
18°

Weight
Standard unit excluding all options and drill
steel 1860

2 690 kg 5 930 lb

Optional equipment
• Water injection system with pneumatic pump
• Water mist flushing system with pressurised tank
 LM 100

Air consumption and compressor recommendation

Component Production Operating Air con- DTH hammer
country pressure sumption (l/
(bar) sec)
DTH hammers:
TD 35 India 10.5 108 108

QL 40 India 10.5 116 116

COP 44 India 10.5 95 95

Chain feed:
DD6 India 7 52 52 52 52
FM1+CMFM
Rotation unit:
BRH India 7 61 61 61 61

Total air consumption excl. DCT 221 229 208

Compressor recommendation:
XAH 210 (Cummins) 10.5 214 (X) (X) (X)

XAHS 675 (Cummins) 12 318 X X X

Note
(X) on the margin

Air consumptions given are required volume for the respective

hammer/drifter/DCT to function - additional volume of air re-
quired for flushing can vary. This depends on drilling depth and
rock formation.
 1250 1500

945 1060

756 725

42°
43°

Factory setup - right swing

R1700
R1890

46°
Maximum horizontal reach (mm)
33°
R1810

42°

Horizontal reach (mm)

Coverage areas

Feed swing angles

2630

2850

2260

1510

5130 1490

740

225
525
2140

2000
1730
43°

33°

1890

2900

Feed vertical on ground

Factory setup - full swing

90°

3°
Vertical reach (mm)

1220
LM 100

9851 2629 01 © Copyright 2008, Atlas Copco Rock Drills AB, Örebro, Sweden. All product names in this publication are trademarks of Atlas Copco. Any unauthorized use or copying of the contents or any part thereof is prohibited. Illustrations and photos in this brochure may show equipment
Printed in Sweden 0902 with optional extras. No warranty is made regarding specifications or otherwise. Specifications and equipment are subject to change without notice. Consult your Atlas Copco Customer Center for specific information.