c187 Datasheet
c187 Datasheet
c187 Datasheet
The C187 comes standard as a combined 7" full colour • Diagnostic Logging
display, powerful control device and fully • Preserved Channels
programmable data logger with 250 MB memory (500
optional). The anti-reflective, high contrast display is • Running Min/Max, Timers, PID Control, Telemetry, Engine Log
clear and vibrant in direct sunlight.
Displayed channels, labels and colours are OPTIONAL UPGRADES
configurable on a diverse set of supplied layouts;
alternatively, use Display Creator software to create Optional Upgrades
fully configurable custom layouts. The C187 acquires • 29918 – C187 500 MB LOGGING
data from devices such as an ECU and displays data
channels, warning alarms, lap times, fuel calculations, • 29900 – C187 44 I/O (see Specifications)
maths functions and much more. – 10 extra analogue voltage inputs (AV11 to AV20, see
pinout)
FEATURES – 4 extra analogue temperature inputs (AT5 to AT8, see
pinout)
• High resolution 178 mm (7") colour LCD display
• 29920 – C187 PRO ANALYSIS
• High brightness for sunlight readability
• 29923 – C187 T2 TELEMETRY (2nd generation Telemetry)
• 16 full colour (RGB) LEDs; colour, function and intensity are
fully programmable • 29905 – C187 ADVANCED FUNCTIONS
Advanced Functions provides:
• Suitable for cars, marine and industrial applications
– Advanced Maths
• Supports Wideband Lambda from MoTeC PLMs or LTCs
– Channel Maths
• Easily integrates with MoTeC CAN based products such as
ECUs and expanders. Full I/O expansion available with use of – 16 x 2D Tables (instead of 4)
E888, E816, VIM and SVIM expanders.
– 16 x 3D Tables (instead of 4)
• GPS Lap Timing
– 50 User Conditions (instead of 20)
• Tell Tales
• 29916 – C187 DISPLAY CREATOR
• Layouts: diverse selection of configurable fixed layouts, or • Operating current: 0.8 A typical at 14 V (at full brightness,
purchase Display Creator to create user designed and excluding sensor currents)
configured layouts. • Reverse battery protection
• 48 user-defined, scrollable message lines with programmable • Battery transient protection
overrides
Sensor supply currents
• 3 programmable modes with customisable labels
• 5 V sensor supply: 0.25 A maximum
Logging
• 8 V sensor supply: 0.25 A maximum
• 250 MB logging memory (500 MB optional)
Operating temperature
• Logging rates up to 1000 samples per second
• Internal: -20 °C to 80 °C (above 60 °C maximum backlight
• Fast Ethernet download
brightness progressively reduced)
• Includes i2 Standard data analysis software (Pro Analysis
• Typical ambient temperature range in free air: -20 °C to 60°C
upgrade available)
Ingress Protection (IP) Rating
Inputs
• IP68 Dust tight, protected against water immersion
• 10 (20 with I/O upgrade*) analogue voltage inputs:
(continuous submersion to depth of at least 1 m)
– 4 (8*) x 0 to 5.46 V, 1.33 mV resolution
➩ IP rating is dependent upon the user ensuring that connector
– 6 (12*) x 0 to 15.0 V, 3.66 mV resolution wire entries are waterproof, which as a minimum, requires
• 4 (8 with I/O upgrade) analogue temperature inputs all unused wire cavities on the connector to be plugged.
– 0 to 15 V, 3.66 mV resolution
Physical
• 4 Digital inputs
• Size: 196.2 x 122.5 x 24.9 mm excluding connector
• 2 Switch inputs
• Weight 670 g
• 4 Speed inputs
• 1 x 79 pin Autosport connector
Outputs
• 6 low side outputs PWM or switched operation SCREEN CLEANING
• 1.0 Amp max, current limited and thermal overload protected Wipe using a clean water dampened microfibre cloth, followed by
a clean dry microfibre cloth.
Expanders
Compatible with E816 and E888 expanders (providing full COMPATIBILITY
functional use), VIM and SVIM
Internal Sensors MoTeC ECUs: M4*, M48*, M8*, M84, M400, M600, M800,
M880, M1
• 3-axis accelerometer, detection range: +/- 5G
MoTeC Accessories: E816, E888, SLM, PLM, LTC, BR2, PDM,
• Dash temperature sensor GPS, VCS etc.
• Sensor supply voltage Many non-MoTeC devices
• Battery voltage *For some ECUs, an additional cable/adaptor may be required in
conjunction with the RS232 adaptor.
Communications
• 4 configurable CAN buses, with individually programmable
CAN bus speeds. One can be used as RS232 Receive. Only 2
of the CAN buses support VIM/SVIM Expanders.
Measurements in mm.
➩ Note: Do not remove any part of the casing. The case provides electromagnetic screening to avoid interference with other
equipment, and is also essential for thermal management. Thermal management may be compromised if mounted in a confined
space, refer to the operating temperature specifications.
Ensure product is not stressed when mounted.