Data Sheet-Cummins 6CTA8.3-GM175 Marine Generators Engine
Data Sheet-Cummins 6CTA8.3-GM175 Marine Generators Engine
Performance data obtain under normal conditions, according to GB/T18297 test conditions
Auxiliary Marine Engine Performance Data
Curve No.: FR92184
CPL: 2337
Engine Family: D41
Date: 2006-10
Technical Request
Aspiration……………………………………………………………………………………….Turbocharged& Intercooled
Net Weight(Dry)-Engine Only-Average……………………………………………………………………….702kg
Instantaneous inertia at Rotating: (without Flywheel)………………………………………………………..0.37kg.m2
Distance from Center of Gravity to the Rear Engine Block……………………………………………………541mm
Distance from Center of Gravity to the Crankshaft Centerline…………………………………………………163mm
Idle Speed………………………………………………………………………………………………………750-850rpm
Compression Ratio…………………………………………………………………………………………….. 17.3:1
Ignition Order………………………………………………………………………………………………… 1-5-3-6-2-4
Engine Mounting
Maximum (Static) Bending Moment at Front Support Mounting Surface…………………………………… 495 N.m
Maximum (Static) Bending Moment at Side Pad Mounting Surface…………………………………………3382769
Maximum (Static) Bending Moment at Rear Face of Block…………………………………………………. 1356 N.m
Moment of Inertia of Complete Engine
— Roll Axis………………………………………………………………………………….… 23.6 kg·m2
— Pitch Axis…………………………………………………………………………………… 65.2 kg·m2
— Yaw Axis……………………………………………………………………………………. 55.9kg·m2
Exhaust System
Maximum Back Pressure…………………………………………………………………………………….. 76 mmHg
Exhaust Pipe Size Normally Acceptable……………………………………………………………………... 75 mm
Maximum Static Supported Weight at the Turbocharger Outlet Flange……………………………………... 22.7 N·m
Exhaust Gas Flow………………………………………………………………..................................….….. N/A
Exhaust Heat Power Loss…………………………………………………………................………………. N/A
Fuel System
Maximum Fuel Flow on the Supply Side of the Fuel Pump……………………………………………….. 259L/hr
— with clean fuel filter……………………………………………………………………….. 63.5 mmHg
— with dirty fuel filter………………………………………………………. ………………. 100 mmHg
Maximum Fuel Inlet Temperature…………………………………………………………………………. 60℃
Maximum Allowable Pressure of Fuel Drain Pipe........................................................................................ 518 mmHg
Cooling System
Coolant Capacity - Engine Only……………………………………………………………………………... 12.3 L
Maximum Engine Cooling Circuit External Resistance……………………………………………………... N/A
Maximum Static Head of Coolant Above Engine Crankshaft Centerline…………………………………… N/A
Standard (modulating) Thermostat Range…………………………………………………………………… 82-95 ℃
Maximum Block Coolant Pressure with Closed Thermostat and no Pressure Cap…………………………. 103kpa
Minimum Pressure Cap……………………………………………………………………………………… 69 kPa
Maximum Engine Coolant Temperature ……………………………………............................................... 96℃
Minimum Engine Coolant Temperature……………………………………………………………………... 79.4℃
Coolant Heat Power Loss................................................................................................................................ N/A
Minimum Fill Rate…………………………………………………………………………………………… 238 litre/min
Maximum Deaeration Time…………………………………………………………………………………. 25 min.
Minimum Drawdown………………………………….…………………………….…… 0.11% of Total System Capacity
(Drawdown Must Exceed the Volume Not Filled at Initial Fill & Must Not Include Expansion Space)
Fan-on Engine Coolant Outlet Temperature………………………………………………………………… 93℃