FLUID

NOMENCLATURE SERVICE DESIGN CONDITIONS

LBS BLACK LIQUOR - STRONG (SS Piping) 0 - 150 psig

- 50% - 70% Solids 150F - 320F
- 1st, 2nd & 3rd Evaporator Effects pH Range: 12

APPLICABLE CODE
ASME B31.3
Normal Service

ITEM DESCRIPTION SPECIFICATION

PIPE Material: Austenitic SS ASTM A312

½” - 2” End Prep: Plain end TP 304L
Wall Thk: Schedule 10S

2½” - 30” Material: Austenitic SS ASTM A312

End Prep: See Note 5 TP 304L
Wall Thk: Schedule 10S

NIPPLES Material: Austenitic SS, welded ASTM A312

2” & Less End Prep: Threaded Gr. TP 304L
Wall Thk: Schedule 40S

FITTINGS Material: Forged SS ASTM A182

2” & Less Conn: Socket weld F304L
(See Note 6) Class: 1000 MSS SP-114

2½” - 24” Material: Austenitic SS ASTM A403

Conn: Butt weld CR 304L
Wall Thk: Schedule 10S MSS SP-43

UNIONS Material: SS ASTM A182

2” & Less Conn: Socket weld F304L
Class: 3000 MSS SP-83

FLANGES Material: Forged SS ASTM A182

½” - 2” Conn: Socket weld F304L
Class: 150 ANSI B16.5

2½” - 24” Material: Austenitic SS stub ends, Type A MSS ASTM A403
length with CS Class 150 lap joint CR304L
flange MSS SP-43
Conn: Butt weld ASTM A105
Class: Schedule 10S ANSI B16.5

MATERIAL CLASSIFICATION
4C-10.03 S1 0
ISSUED FOR
PROJECT NO. SHEET 1 OF 4 Rev.
CMPC PULP PROJ.
G. Navarrete
DATE OF
APPR. ISSUE

DEPT. GENERIC
NOV 2020
APPR. P. Strodthoff APPR. DATE
ITEM DESCRIPTION SPECIFICATION

BOLTS & NUTS Material: Carbon steel ASTM A307, Gr. B for bolts
All Sizes Type: Unified inch screw threads, UNC, ASTM A563, Gr. A for nuts
Class 2 fit with heavy hex nut ANSI B1.1
ANSI B18.2.1 & B18.2.2

GASKETS Material: CMPC Gasket Table by Standard

INSTRUMENT FITTINGS Material: Forged SS ASTM A182

½” - 2” Conn: Threaded F304L
Type: 45 latrolets, elbolets ANSI B16.11
Class: 3000

Material: Forged SS ASTM A182

Conn: Threaded F304L
Type: Couplings, half-couplings MSS SP-114
Class: 1000

LUBRICANTS Type: Molybdenum disulfide base Fel-Pro C-100

for bolts and gaskets or approved equal

Type: Fast-curing thread sealant Loctite PST #567

for SS pipe or approved equal

VALVE DESCRIPTION VALVE NO.

GATE Material: Cast 316 SS, OS & Y, bolted bonnet V-1221

2” & Less split wedge
Conn: Threaded
Class: 150 (for steam purge & instr. conn.)

CHECK Material: Cast 316 SS, swing, Y-pattern V-3222

2” & Less threaded cap
(See Note 4) Conn: Threaded
Class: 150

PLUG Material: 316 SS body & plug with teflon V-6241

1” - 3” sleeves, lever operator
Note 7 Conn: Flanged
Class: 150
(for burner shut-off on recovery furnace
only)
GATE Material: Cast 316 SS, OS & Y bolted bonnet, V-1245
2½” - 12” split wedge
Conn: Flanged
Class: 150

MATERIAL CLASSIFICATION
4C-10.03 S1 0
ISSUED FOR
PROJECT NO. SHEET 2 OF 4 Rev.
CMPC PULP PROJ.
G. Navarrete
DATE OF
APPR. ISSUE

DEPT. GENERIC
NOV 2020
APPR. P. Strodthoff APPR. DATE
VALVE DESCRIPTION VALVE NO.

2½” - 12” Material: Cast iron, all iron V-1132

(See Note 2) Conn: Flanged
Class: 125
(Limited use only)

PLUG Material: 316 SS body & plug with teflon V-6241

4” - 8” sleeves, gear operator
Note 7 Conn: Flanged
Class: 150
(For burner shut-off on recovery
furnace only)

INSTRUCTIONS: Fabrication and erection of austenitic stainless steel Standard 4S-02.01

thin wall pressure piping (except wall thickness)

Instrument fittings for steel pipe Standard 4D-10.02

NOTES:
1. All listed specifications and standards shall conform to the latest edition.

2. Cast iron gate valves shall be used only in the following services, where there is normally no flow:

 Vessel and pipe drains

 Bypass lines except at control stations

2. Line size shall not be less than 2 ½” dia. except for instrument connections, steam purge
connections and sample lines.

3. Steam purge line check valves shall be selected from the appropriate steam service piping
classification standard. (Do not use stainless steel check valves).

4. The end prep. for pipe and fittings shall be in accordance with Paragraph 5.7 of Design Standard
4S-02.01.

5. Includes the use of swaged nipples in any combination of ends within the confines of this Class
Sheet. See Design Standard 4D-03.02.

6. For information on Safe Handling & First Aid Instructions, see attachment(s).

7. Only under engineering request

MATERIAL CLASSIFICATION
4C-10.03 S1 0
ISSUED FOR
PROJECT NO. SHEET 3 OF 4 Rev.
CMPC PULP PROJ.
G. Navarrete
DATE OF
APPR. ISSUE

DEPT. GENERIC
NOV 2020
APPR. P. Strodthoff APPR. DATE
PRODUCT NAME

BLACK LIQUOR

INFORMATION FOR SAFE HANDLING

 APPEARANCE & ODOUR

 Black liquid, rotten egg odour

 STORAGE
 Do not permit contact with acidic materials
 Vessels which have contained black liquor should be checked for hydrogen sulfide before entering

 SPILL OR LEAK PROCEDURES

IF SPILL OR LEAK OCCURS, IMMEDIATELY CONSULT MILL ENVIRONMENTAL CONTROL DEPARTMENT
 Never neutralize spill with acid or divert to acid containing sewer
 Contact with acids can result in release of potentially lethal concentrations of hydrogen sulfide gas
 Ventilate spill area
 Spills will make floors very slippery

 WASTE DISPOSAL
 Dilute and flush to an approved treatment system as per mill requirements

PERSONNEL PROTECTION
 Wear chemical worker's goggles and rubber gloves
 Other protective equipment such as aprons, boots, face shields or rubber suits may be needed when handling large
amounts of this material
 Eyewash stations and safety showers should be readily accessible near use areas

FIRST AID
 INHALATION
 Remove to fresh air

 EYE CONTACT
 Possible blindness
 Immediately flush with running water for 15 minutes, holding eyelids open
 Contact Physician

 SKIN CONTACT
 Can cause severe burns
 Flush affected area immediately with large volumes of water for a minimum of 15 minutes, or until slippery feel is
gone.
 Remove contaminated clothing
 INGESTION
 Do not induce vomiting
 Rinse mouth out with water
 Drink large amounts of water & call for medical assistance

MATERIAL SAFETY DATA SHEET (MSDS) - AVAILABLE ON REQUEST

MATERIAL CLASSIFICATION
4C-10.03 S1 0
ISSUED FOR
PROJECT NO. SHEET 4 OF 4 Rev.
CMPC PULP PROJ.
G. Navarrete
DATE OF
APPR. ISSUE

DEPT. GENERIC
NOV 2020
APPR. P. Strodthoff APPR. DATE