Data sheet 3RT2625-1AP05

capacitor contactor, AC-6b 16.7 kVAr, / 400 V, 3-pole, 230 V AC, 50 Hz, auxiliary
contacts: 1 NO + 2 NC, screw terminal, size: S0

product brand name SIRIUS

product designation capacitor contactors
product type designation 3RT26
General technical data
size of contactor S0
product extension auxiliary switch No
insulation voltage
● of main circuit with degree of pollution 3 rated value 690 V
● of auxiliary circuit with degree of pollution 3 rated value 690 V
surge voltage resistance
● of main circuit rated value 6 kV
● of auxiliary circuit rated value 6 kV
maximum permissible voltage for protective separation between 400 V
coil and main contacts according to EN 60947-1
shock resistance at rectangular impulse
● at AC 7,5g / 5 ms, 4,7g / 10 ms
shock resistance with sine pulse
● at AC 11,8g / 5 ms, 7,4g / 10 ms
mechanical service life (operating cycles)
● of the contactor with added auxiliary switch block typical 3 000 000
electrical endurance (operating cycles) 200 000
reference code according to IEC 81346-2 Q
Substance Prohibitance (Date) 05/01/2014
Ambient conditions
installation altitude at height above sea level maximum 2 000 m
ambient temperature
● during operation -25 ... +60 °C
● during storage -55 ... +80 °C
relative humidity minimum 10 %
relative humidity at 55 °C according to IEC 60068-2-30 95 %
maximum
Environmental footprint
Environmental Product Declaration(EPD) Yes
Global Warming Potential [CO2 eq] total 106 kg
Global Warming Potential [CO2 eq] during manufacturing 2.47 kg
Global Warming Potential [CO2 eq] during operation 104 kg
global warming potential [CO2 eq] after end of life -0.226 kg
Main circuit
number of poles for main current circuit 3
number of NO contacts for main contacts 3
number of NC contacts for main contacts 0

3RT26251AP05 Subject to change without notice

10/30/2023
Page 1/5 © Copyright Siemens
 operational current at AC-6b at 690 V at ambient temperature 24 A
60 °C rated value
operating reactive power at AC-6b
● at 230 V at 50/60 Hz at ambient temperature 60 °C rated 3 ... 9.6 kvar
value
● at 400 V at 50/60 Hz at ambient temperature 60 °C rated 6 ... 16.7 kvar
value
● at 500 V at 50/60 Hz at ambient temperature 60 °C rated 7 ... 21 kvar
value
● at 690 V at 50/60 Hz at ambient temperature 60 °C rated 10 ... 29 kvar
value
no-load switching frequency
● at AC 500 1/h
operating frequency at AC-6b
● at 230 V maximum 180 1/h
● at 240 V maximum 180 1/h
● at 400 V maximum 180 1/h
● at 480 V maximum 180 1/h
● at 500 V maximum 180 1/h
● at 600 V maximum 180 1/h
● at 690 V maximum 150 1/h
Control circuit/ Control
type of voltage AC
type of voltage of the control supply voltage AC
control supply voltage at AC
● at 50 Hz rated value 230 V
control supply voltage frequency
● 1 rated value 50 Hz
operating range factor control supply voltage rated value of
magnet coil at AC
● at 50 Hz 0.8 ... 1.1
apparent pick-up power of magnet coil at AC 77 VA
inductive power factor with closing power of the coil 0.82
apparent holding power of magnet coil at AC 9.8 VA
inductive power factor with the holding power of the coil 0.25
closing delay
● at AC 8 ... 40 ms
opening delay
● at AC 4 ... 16 ms
arcing time 10 ... 10 ms
control version of the switch operating mechanism Standard A1 - A2
residual current of the electronics for control with signal
<0>
● at AC at 230 V maximum permissible 6 mA
Auxiliary circuit
number of NC contacts for auxiliary contacts 2
● attachable 0
● instantaneous contact 2
number of NO contacts for auxiliary contacts 1
● attachable 0
● instantaneous contact 1
operational current of auxiliary contacts at AC-12 maximum 10 A
operational current of auxiliary contacts at AC-15
● at 230 V 6A
● at 400 V 3A
● at 690 V 1A
operational current of auxiliary contacts at DC-13
● at 24 V 6A
● at 60 V 2A
● at 110 V 1A
● at 125 V 0.9 A
● at 220 V 0.3 A
contact reliability of auxiliary contacts 0.00000001

3RT26251AP05 Subject to change without notice

10/30/2023
Page 2/5 © Copyright Siemens
UL/CSA ratings
contact rating of auxiliary contacts according to UL A600 / Q600
Short-circuit protection
design of the fuse link
● for short-circuit protection of the main circuit with type of gG: 50 A (690 V, 50 kA)
coordination 1 required
● for short-circuit protection of the auxiliary switch required gG: 10 A (500 V, 1 kA)
Installation/ mounting/ dimensions
mounting position +/-180° rotation possible on vertical mounting surface; can be tilted forward and
backward by +/- 22.5° on vertical mounting surface
fastening method screw and snap-on mounting onto 35 mm DIN rail according to DIN EN 50022
height 135 mm
width 45 mm
depth 155 mm
required spacing
● with side-by-side mounting at the side 10 mm
● for grounded parts at the side 10 mm
Connections/ Terminals
type of electrical connection
● for main current circuit screw-type terminals
● for auxiliary and control circuit screw-type terminals
● at contactor for auxiliary contacts Screw-type terminals
● of magnet coil Screw-type terminals
type of connectable conductor cross-sections for main contacts
● solid 2x (1 ... 2.5 mm²), 2x (2.5 ... 10 mm²)
● stranded 2x (1 ... 2.5 mm²), 2x (2.5 ... 10 mm²)
● solid or stranded 2x (1 ... 2.5 mm²), 2x (2.5 ... 10 mm²)
● finely stranded with core end processing 2x (1 ... 2.5 mm²), 2x (2.5 ... 6 mm²), 1x 10 mm²
type of connectable conductor cross-sections
● for auxiliary contacts
— solid 2x (0.5 ... 1.5 mm²), 2x (0.75 ... 2.5 mm²), 2x 4 mm²
— solid or stranded 2x (0.5 ... 1.5 mm²), 2x (0.75 ... 2.5 mm²), 2x 4 mm²
— finely stranded with core end processing 2x (0.5 ... 1.5 mm²), 2x (0.75 ... 2.5 mm²)
● for AWG cables for auxiliary contacts 2x (20 ... 16), 2x (18 ... 14), 2x 12
type of minimum connectable cross-sections for main
contacts at AC-6b
● at 40 °C 1x 6 mm²
● at 60 °C 1x 10 mm², 2x 6 mm²
AWG number as coded connectable conductor cross section for 16 ... 8
main contacts
Safety related data
product function
● mirror contact according to IEC 60947-4-1 No
● positively driven operation according to IEC 60947-5-1 No
protection class IP on the front according to IEC 60529 IP20
touch protection on the front according to IEC 60529 finger-safe, for vertical contact from the front
Certificates/ approvals
General Product Approval EMC

Confirmation

Declaration of Conformity Test Certificates Marine / Shipping

Type Test Certific-

ates/Test Report

3RT26251AP05 Subject to change without notice

10/30/2023
Page 3/5 © Copyright Siemens
 other Dangerous Good Environment

Household and similar Confirmation Transport Information Environmental Con-

appliances firmations

Further information
Siemens has decided to exit the Russian market (see here).
https://press.siemens.com/global/en/pressrelease/siemens-wind-down-russian-business
Siemens is working on the renewal of the current EAC certificates.
Please contact your local Siemens office on the status of validity of the EAC certification if you intend to import or offer to supply these products to an
EAC relevant market (other than the sanctioned EAEU member states Russia or Belarus).
Information on the packaging
https://support.industry.siemens.com/cs/ww/en/view/109813875
Information- and Downloadcenter (Catalogs, Brochures,…)
https://www.siemens.com/ic10
Industry Mall (Online ordering system)
https://mall.industry.siemens.com/mall/en/en/Catalog/product?mlfb=3RT2625-1AP05
Cax online generator
http://support.automation.siemens.com/WW/CAXorder/default.aspx?lang=en&mlfb=3RT2625-1AP05
Service&Support (Manuals, Certificates, Characteristics, FAQs,...)
https://support.industry.siemens.com/cs/ww/en/ps/3RT2625-1AP05
Image database (product images, 2D dimension drawings, 3D models, device circuit diagrams, EPLAN macros, ...)
http://www.automation.siemens.com/bilddb/cax_de.aspx?mlfb=3RT2625-1AP05&lang=en
Characteristic: Tripping characteristics, I²t, Let-through current
https://support.industry.siemens.com/cs/ww/en/ps/3RT2625-1AP05/char
Further characteristics (e.g. electrical endurance, switching frequency)
http://www.automation.siemens.com/bilddb/index.aspx?view=Search&mlfb=3RT2625-1AP05&objecttype=14&gridview=view1

3RT26251AP05 Subject to change without notice

10/30/2023
Page 4/5 © Copyright Siemens
 1/L1

3/L2

5/L3
A1

13

21

31
-QA
A2

14

22

32
2/T1

4/T2

6/T3

last modified: 10/28/2023

3RT26251AP05 Subject to change without notice

10/30/2023
Page 5/5 © Copyright Siemens