144~200W Constant Voltage + Constant Current LED Driver ELG-200 series

IS 15885(Part 2/Sec13)

SELV IP65 IP67

110 M M 8
THOMAS SAMUEL
THOMAS SAMUEL

(for DA-Type only) Type HL R-41027766

(for 12/12B/24/24B/36/36A
/42A/48/48A/54A only)

■ Features ■ Applications
Constant Voltage + Constant Current mode output LED street lighting
Metal housing design with functional Ground LED architectural lighting
Built-in active PFC function LED bay lighting
No load / Standby power consumption <0.5W LED floodlighting
IP67 / IP65 rating for indoor or outdoor installations Type “HL” for use in Class I, Division 2
Function options: output adjustable via potentiometer; hazardous (Classified) location.
3 in 1 dimming (dim-to-off); Smart timer dimming; DAL I
Typical lifetime>50000 hours
5 years warranty

■ Description
ELG-200 series is a 200W AC/DC LED driver featuring the dual mode constant voltage and
constant current output. ELG-200 operates from 100～305VAC and offers models with different
rated voltage ranging between 12V and 54V. Thanks to the high efficiency up to 93%, with the
fanless design, the entire series is able to operate for -40 ℃ ~ +90 ℃ case temperature under free
air convection. The design of metal housing and IP67/IP65 ingress protection level allows this series
to fit both indoor and outdoor applications. ELG-200 is equipped with various function options, such as
dimming methodologies, so as to provide the optimal design flexibility for LED lighting system

■ Model Encoding
ELG - 200 - 24 A -
{
Input wiring type
Function mode option
Blank:2-wire input for standard model
3Y:3-wire input for standard model
Rated output voltage(12/24/36/42/48/54V)
Rated wattage
Series name

Type IP Level Function Note

Blank IP67 Io and Vo fixed. In Stock
A IP65 Io and Vo adjustable through built-in potentiometer. In Stock
B IP67 3 in 1 dimming function (0~10Vdc, 10V PWM signal and resistance) In Stock
Io and Vo adjustable through built-in potentiometer &
AB IP65 3 in 1 dimming function (0~10Vdc, 10V PWM signal and resistance) In Stock
DA IP67 DALI control technology. In Stock
Dx IP67 Built-in Smart timer dimming function by user request. By request
D2 IP67 Built-in Smart timer dimming and programmable function. In Stock
File Name:ELG-200-SPEC 2018-09-30
 144~200W Constant Voltage + Constant Current LED Driver ELG-200 series
SPECIFICATION
MODEL ELG-200-12 ELG-200-24 ELG-200-36 ELG-200-42 ELG-200-48 ELG-200-54
DC VOLTAGE 12V 24V 36V 42V 48V 54V
CONSTANT CURRENT REGION Note.2 6 ~ 12V 12 ~ 24V 18 ~ 36V 21 ~ 42V 24 ~ 48V 27 ~ 54V
RATED CURRENT 16A 8.4A 5.55A 4.76A 4.16A 3.72A
200VAC ~ 305VAC
RATED POWER 192W 201.6W 199.8W 199.9W 199.68W 200.88W
100VAC ~ 180VAC
144W 150W 149.76W 149.94W 149.76W 150.12W
RIPPLE & NOISE (max.) Note.3 150mVp-p 200mVp-p 250mVp-p 250mVp-p 250mVp-p 350mVp-p
Adjustable for A/AB-Type only (via built-in potentiometer)
VOLTAGE ADJ. RANGE
11.2 ~ 12.8V 22.4 ~ 25.6V 33.5 ~ 38.5V 39 ~ 45V 44.8 ~ 51.2V 50 ~ 57V
OUTPUT
Adjustable for A/AB-Type only (via built-in potentiometer)
CURRENT ADJ. RANGE
8 ~ 16A 4.2 ~ 8.4A 2.78 ~ 5.55A 2.38 ~ 4.76A 2.08 ~ 4.16A 1.86 ~ 3.72A
VOLTAGE TOLERANCE Note.4 ±3.0% ±2.0% ±2.0% ±2.0% ±2.0% ±2.0%
LINE REGULATION ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5%
LOAD REGULATION ±2.0% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5%
SETUP, RISE TIME Note.6 500ms, 100ms/230VAC, 1000ms, 100ms/115VAC
HOLD UP TIME (Typ.) 10ms/ 230VAC 10ms/ 115VAC
100 ~ 305VAC 142 ~ 431VDC
VOLTAGE RANGE Note.5
(Please refer to "STATIC CHARACTERISTIC" section)
FREQUENCY RANGE 47 ~ 63Hz
PF≧0.97/115VAC, PF≧0.95/230VAC, PF≧0.92/277VAC@full load
POWER FACTOR (Please refer to "POWER FACTOR (PF) CHARACTERISTIC" section)
THD< 20%(@load≧50%/115VC,230VAC; @load≧75%/277VAC)
TOTAL HARMONIC DISTORTION
(Please refer to “TOTAL HARMONIC DISTORTION(THD)” section)
INPUT EFFICIENCY (Typ.) 90% 92% 92% 92.5% 93% 93%
AC CURRENT 1.8A / 115VAC 1.2A / 230VAC 1.0A/277VAC
INRUSH CURRENT(Typ.) COLD START 60A(twidth=510μs measured at 50% Ipeak) at 230VAC; Per NEMA 410
MAX. No. of PSUs on 16A
4 units (circuit breaker of type B) / 6 units (circuit breaker of type C) at 230VAC
CIRCUIT BREAKER
LEAKAGE CURRENT <0.75mA / 277VAC
NO LOAD / STANDBY No load power consumption <0.5W for Blank / A / Dx / D-Type
POWER CONSUMPTION Note.7 Standby power consumption <0.5W for B / AB / DA-Type
95 ~ 108%
OVER CURRENT
Constant current limiting, recovers automatically after fault condition is removed
SHORT CIRCUIT Hiccup mode, recovers automatically after fault condition is removed
PROTECTION 13.5 ~ 18V 27 ~ 34V 42 ~ 49V 47 ~ 54V 54 ~ 63V 60 ~ 67V
OVER VOLTAGE
Shut down output voltage, re-power on to recover
OVER TEMPERATURE Shut down output voltage, re-power on to recover
WORKING TEMP. Tcase=-40 ~ +90℃ (Please refer to “ OUTPUT LOAD vs TEMPERATURE” section)
MAX. CASE TEMP. Tcase=+90℃
WORKING HUMIDITY 20 ~ 95% RH non-condensing
ENVIRONMENT STORAGE TEMP., HUMIDITY -40 ~ +90℃, 10 ~ 95% RH
TEMP. COEFFICIENT ±0.03%/℃ (0 ~ 50℃)
VIBRATION 10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes
UL8750(type”HL”), CSA C22.2 No. 250.13-12;IEC/EN/AS/NZS 61347-1, IEC/EN/AS/NZS 61347-2-13 independent, EN62384;
SAFETY STANDARDS
EAC TP TC 004;BIS IS15885(for 12/12B/24/24B/36/36A/42A/48/48A/54A only);GB19510.14,GB19510.1; IP65 or IP67;
KC61347-1,KC61347-2-13 approved
DALI STANDARDS Compiy with IEC62386-101,102,207 for DA-Type only

SAFETY & WITHSTAND VOLTAGE I/P-O/P:3.75KVAC I/P-FG:2.0KVAC O/P-FG:1.5KVAC

EMC ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH
EMC EMISSION Compliance to EN55015,EN61000-3-2 Class C (@load≧50%) ; EN61000-3-3;GB17625.1,GB17743;EAC TP TC 020; KC KN15,KN61547
EMC IMMUNITY Compliance to EN61000-4-2,3,4,5,6,8,11; EN61547, light industry level (surge immunity Line-Earth 6KV, Line-Line 4KV);EAC TP TC 020; KC KN15,KN61547
MTBF 826.7K hrs min. Telcordia SR-332 (Bellcore) ; 200.8Khrs min. MIL-HDBK-217F (25℃)
OTHERS DIMENSION 244*71*37.5mm (L*W*H)
PACKING 1.22Kg; 12pcs / 15.2Kg / 0.72CUFT
1. All parameters NOT specially mentioned are measured at 230VAC input, rated current and 25℃ of ambient temperature.
NOTE
2. Please refer to "DRIVING METHODS OF LED MODULE".
3. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
4. Tolerance : includes set up tolerance, line regulation and load regulation.
5. De-rating may be needed under low input voltages. Please refer to “STATIC CHARACTERISTIC” sections for details.
6. Length of set up time is measured at first cold start. Turning ON/OFF the driver may lead to increase of the set up time.
7. No load/standby power consumption is specified for 230VAC input.
8. The driver is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the
complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again.
9. This series meets the typical life expectancy of >50,000 hours of operation when Tcase, particularly tc point (or TMP, per DLC), is about 70℃ or less.
10.Please refer to the warranty statement on MEAN WELL's website at http://www.meanwell.com
11.The ambient temperature derating of 3.5℃/1000m with fanless models and of 5℃/1000m with fan models for operating altitude higher than 2000m(6500ft).
12.For any application note and IP water proof function installation caution, please refer our user manual before using.
https://www.meanwell.com/Upload/PDF/LED_EN.pdf
File Name:ELG-200-SPEC 2018-09-30
 144~200W Constant Voltage + Constant Current LED Driver ELG-200 series

Block Diagram

PFC fosc : 50~120KHz

PWM fosc : 60~130KHz

EMI FILTER PFC POWER RECTIFIERS Vo+

I/P & SWITCHING &
CIRCUIT Vo-
RECTIFIERS FILTER
O.L.P.

O.T.P. O.L.P. DETECTION

PWM & PFC CIRCUIT
CONTROL
PFC CONTROL
O.V.P.

CASE :Protective Earth

DRIVING METHODS OF LED MODULE

※ This series is able to work in either Constant Current mode (a direct drive way) or
Constant Voltage mode (usually through additional DC/DC driver) to drive the LEDs.

In the constant current region, the highest voltage at the output of the driver
100 depends on the configuration of the end systems.

(B) Should there be any compatibility issues, please contact MEAN WELL.
Vo(%)

(A) Constant
Constant Current area
V oltage area
50
(min.)
(C)
Hiccup
Protection

50 100 Io(%)

Typical output current normalized by rated current (%)

File Name:ELG-200-SPEC 2018-09-30

 144~200W Constant Voltage + Constant Current LED Driver ELG-200 series

DIMMING OPERATION

Vo-(Black)
ACN(Blue) Vo+(Red)
ACL(Brown) ELG-200
DIM+(Blue)*
DIM-(White)**

* DIM+ for B/AB-Type

DA+ for DA-Type
※ 3 in 1 dimming function (for B/AB-Type) PROG+ for D2-Type
Output constant current level can be adjusted by applying one of the three methodologies between DIM+ and DIM-: * *DIM- for B/AB-Type
DA- for DA-Type
0 ~ 10VDC, or 10V PWM signal or resistance. PROG- for D2-Type
Direct connecting to LEDs is suggested. It is not suitable to be used with additional drivers.
Dimming source current from power supply: 100μA (typ.)
◎ Applying additive 0 ~ 10VDC 100%
90%
80%
+
Vo+ + 70%

Output current (%)

60%
-
Vo- - 50%
DIM+ 40%
+
30%
Additive Voltage
- 20%
DIM-
10%

“DO NOT connect "DIM- to Vo-" 0%

0V 1V 2V 3V 4V 5V 6V 7V 8V 9V 10V
Dimming input: Additive voltage

◎ Applying additive 10V PWM signal (frequency range 100Hz ~ 3KHz): 100%
90%
80%
+
Vo+ + 70%
Output current (%)

60%
-
Vo- - 50%
DIM+ 40%

Additive PWM signal 30%

20%
DIM-
10%

“DO NOT connect "DIM- to Vo-" 0%

0% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100%
Duty cycle of additive 10V PWM signal dimming input

◎ Applying additive resistance: 100%

90%
+ 80%
Vo+ +
70%
Output current (%)

- 60%
Vo- -
DIM+ 50%
40%
Additive Resistance
30%
DIM- 20%
10%
“DO NOT connect "DIM- to Vo-"
0%
Short 10K/N 20K/N 30K/N 40K/N 50K/N 60K/N 70K/N 80K/N 90K/N 100K/N
(N=driver quantity for synchronized dimming operation )
Dimming input: Additive resistance
Note : 1. Min. dimming level is about 8% and the output current is not defined when 0%< I out<8%.
2. The output current could drop down to 0% when dimming input is about 0kΩ or 0Vdc, or 10V PWM signal with 0% duty cycle.

File Name:ELG-200-SPEC 2018-09-30

 144~200W Constant Voltage + Constant Current LED Driver ELG-200 series

※ DAL I Interface (primary side; for DA-Type)

Apply DALI signal between DA+ and DA-.
DAL I protocol comprises 16 groups and 64 addresses.
First step is fixed at 8% of output.
※ Smart timer dimming function (for Dxx-Type by User definition)
MEAN WELL Smart timer dimming primarily provides the adaptive proportion dimming profile for the output constant current level to perform up to 14
consecutive hours. 3 dimming profiles hereunder are defined accounting for the most frequently seen applications. If other options may be needed,
please contact MEAN WELL for details.

Ex : ◎ D01-Type: the profile recommended for residential lighting

Set up for D01-Type in Smart timer dimming software program:

T1 T2 T3 T4
Dimming Level(%)

TIME** 06:00 07:00 11:00 ---

LEVEL** 100% 70% 50% 70%

Operating Time(HH:MM)
**: TIME matches Operating Time in the diagram whereas LEVEL matches Dimming Level.
Example: If a residential lighting application adopts D01-Type, when turning on the power supply at 6:00pm, for instance:
[1] The power supply will switch to the constant current level at 100% starting from 6:00pm.
[2] The power supply will switch to the constant current level at 70% in turn, starting from 0:00am, which is 06:00 after the power supply turns on.
[3] The power supply will switch to the constant current level at 50% in turn, starting from 1:00am, which is 07:00 after the power supply turns on.
[4] The power supply will switch to the constant current level at 70% in turn, starting from 5:00am, which is 11:00 after the power supply turns on.
The constant current level remains till 8:00am, which is 14:00 after the power supply turns on.

Ex: ◎ D02-Type: the profile recommended for street lighting

Set up for D02-Type in Smart timer dimming software program:

T1 T2 T3 T4 T5
Dimming Level(%)

TIME** 01:00 03:00 8:00 11:00 ---

LEVEL** 50% 80% 100% 60% 80%

Operating Time(HH:MM)
**: TIME matches Operating Time in the diagram whereas LEVEL matches Dimming Level.
Example: If a street lighting application adopts D02-Type, when turning on the power supply at 5:00pm, for instance:
[1] The power supply will switch to the constant current level at 50% starting from 5:00pm.
[2] The power supply will switch to the constant current level at 80% in turn, starting from 6:00pm, which is 01:00 after the power supply turns on.
[3] The power supply will switch to the constant current level at 100% in turn, starting from 8:00pm, which is 03:00 after the power supply turns on.
[4] The power supply will switch to the constant current level at 60% in turn, starting from 1:00am, which is 08:00 after the power supply turns on.
[5] The power supply will switch to the constant current level at 80% in turn, starting from 4:00am, which is 11:00 after the power supply turns on. The
constant current level remains till 6:30am, which is 14:00 after the power supply turns on.

File Name:ELG-200-SPEC 2018-09-30

 144~200W Constant Voltage + Constant Current LED Driver ELG-200 series

Ex: ◎ D03-Type: the profile recommended for tunnel lighting

Set up for D03-Type in Smart timer dimming software program:

Dimming Level(%)

T1 T2 T3

TIME** 01:30 11:00 ---

LEVEL** 70% 100% 70%

Operating Time(HH:MM)

**: TIME matches Operating Time in the diagram whereas LEVEL matches Dimming Level.
Example: If a tunnel lighting application adopts D03-Type, when turning on the power supply at 4:30pm, for instance:
[1] The power supply will switch to the constant current level at 70% starting from 4:30pm.
[2] The power supply will switch to the constant current level at 100% in turn, starting from 6:00pm, which is 01:30 after the power supply turns on.
[3] The power supply will switch to the constant current level at 70% in turn, starting from 5:00am, which is 11:00 after the power supply turns on.
The constant current level remains till 6:30am, which is 14:00 after the power supply turns on.

File Name:ELG-200-SPEC 2018-09-30

 144~200W Constant Voltage + Constant Current LED Driver ELG-200 series

OUTPUT LOAD vs TEMPERATURE(Note.10)

100 100
others

80 80
230VAC 230VAC
input only 12V input only
60 60
LOAD (%)

LOAD (%)
40 40
110VAC 110VAC

20 20

-40 -25 0 10 20 30 50 60 70 (HORIZONTAL) -40 -25 0 20 45 55 65 75 90 (HORIZONTAL)

AMBIENT TEMPERATURE,Ta (℃) Tcase (℃)

◎ If ELG-200 operates in Constant Current mode with the
rated current, the maximum workable Ta is 50 ℃ for
12V-model whereas 60 ℃ for other models.

STATIC CHARACTERISTIC POWER FACTOR (PF) CHARACTERISTIC

※ Tcase at 80℃

100
Constant Current Mode
1
90
0.98
80
75 0.96
70 0.94
PF

0.92 277V(200W)
60
LOAD (%)

0.9 230V(200W)
50
0.88 115V(150W)
40
0.86

0.84
100 120 140 160 180 200 240 250 260 270 280 305 50% 60% 70% 80% 90% 100%

INPUT VOLTAGE (V) 60Hz

LOAD
※ De-rating is needed under low input voltage.

TOTAL HARMONIC DISTORTION (THD) EFFICIENCY vs LOAD

ELG-200 series possess superior working efficiency that up to 93% can
be reached in field applications.
※ 48V Model, Tcase at 80℃
※ 48V Model, Tcase at 80℃
18%
96
16%
94
14%
92
EFFICIENCY(%)

12% 277V(200W)
THD

90 277V(200W)
230V(200W)
10% 88 230V(200W)
115V(150W)
86 115V(150W)
8%
84
6% 82

4% 80
50% 60% 70% 80% 90% 100% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100%

LOAD LOAD

File Name:ELG-200-SPEC 2018-09-30

 144~200W Constant Voltage + Constant Current LED Driver ELG-200 series

LIFE TIME

120

100

80
LIFETIME(Kh)

60

40

20

0
20 30 40 50 60 70 80 90

Tcase ( ℃ )

File Name:ELG-200-SPEC 2018-09-30

 144~200W Constant Voltage + Constant Current LED Driver ELG-200 series

MECHANICAL SPECIFICATION
※ Blank-Type (for 12V model) CASE NO.: 262A Unit:mm

244
233
300±20 220 300±20
53.8
71

ACN(Blue) Vo-(Black)
tc 90
ACL(Brown) Vo+(Red)
SJOW 17AWGx2C SJTW 14AWGx2C

32
&H05RN-F 1.0mm 2

4-ψ4.5

tc : Max. Case Temperature

37.5
37

※ Blank-Type (for other models)

244
233
300±20 220 300±20
53.8
71

ACN(Blue) 90 Vo-(Black)
ACL(Brown) tc Vo+(Red)
SJOW 17AWGx2C 2
32

SJOW 17AWGx2C &05RN-F 1.0mm

&H05RN-F 1.0mm 2

4-ψ4.5

tc : Max. Case Temperature

37.5
37

File Name:ELG-200-SPEC 2018-09-30

 144~200W Constant Voltage + Constant Current LED Driver ELG-200 series

※ A-Type (for 12V model)

244
233
300±20 220 300±20

53.8
71
ACN(Blue) Vo-(Black)
tc 90
ACL(Brown) Vo+(Red)
SJOW 17AWGx2C SJTW 14AWGx2C

32
&H05RN-F 1.0mm 2

4-ψ4.5

tc : Max. Case Temperature

37.5
37
21.01

14.5 38.5

※ A-Type (for other models)

244
233
300±20 220 300±20
53.8
71

ACN(Blue) Vo-(Black)
tc 90 Vo+(Red)
ACL(Brown)
SJOW 17AWGx2C
32

2
&H05RN-F 1.0mm 2 SJOW 17AWGx2C &05RN-F 1.0mm

4-ψ4.5

tc : Max. Case Temperature

37.5
37
21.01

14.5 38.5

File Name:ELG-200-SPEC 2018-09-30

 144~200W Constant Voltage + Constant Current LED Driver ELG-200 series

※ AB-Type (for 12V model)

244
233
300±20 220 300±20

53.8
SJTW 14AWGx2C
71

Vo-(Black)
ACN(Blue) Vo+(Red)
90
ACL(Brown) tc DIM+( Blue )
SJOW 17AWGx2C DIM-( White )

32
UL2517 20AWGx2C
&H05RN-F 1.0mm 2

4-ψ4.5

tc : Max. Case Temperature

37.5
37
21.01

14.5 38.5

※ AB-Type (for other models)

244
233
300±20 220 300±20

SJOW 17AWGx2C
53.8

&05RN-F 1.0mm 2
71

Vo-(Black)
ACN(Blue) Vo+(Red)
90
ACL(Brown) tc DIM+( Blue )
SJOW 17AWGx2C DIM-( White )
32

UL2517 20AWGx2C
&H05RN-F 1.0mm 2

4-ψ4.5

tc : Max. Case Temperature

37.5
37
21.01

14.5 38.5

File Name:ELG-200-SPEC 2018-09-30

 144~200W Constant Voltage + Constant Current LED Driver ELG-200 series

※ B/DA/D2-Type (for 12V model)

244
233
300±20 220 300±20
53.8

SJTW 14AWGx2C
71

Vo-(Black)
ACN(Blue) Vo+(Red)
90
ACL(Brown) tc DIM+( Blue )*
SJOW 17AWGx2C DIM-( Whit e)**

32
UL2517 20AWGx2C
&H05RN-F 1.0mm 2

4-ψ4.5 * DIM+ for B-Type

DA+ for DA-Type
PROG+ for D2-Type
tc : Max. Case Temperature * *DIM- for B-Type
DA- for DA-Type
PROG- for D2-Type

37.5
37

※ B/DA/D2-Type (for other models)

244
233
300±20 220 300±20

SJOW 17AWGx2C
53.8

&05RN-F 1.0mm 2
71

Vo-(Black)
ACN(Blue) Vo+(Red)
90
ACL(Brown) tc DIM+( Blue )*
SJOW 17AWGx2C DIM-( White )**
32

UL2517 20AWGx2C
&H05RN-F 1.0mm 2

4-ψ4.5 * DIM+ for B-Type

DA+ for DA-Type
PROG+ for D2-Type
tc : Max. Case Temperature * *DIM- for B-Type
DA- for DA-Type
PROG- for D2-Type
37.5
37

File Name:ELG-200-SPEC 2018-09-30

 144~200W Constant Voltage + Constant Current LED Driver ELG-200 series

※ 3Y Model (3-wire input)

244
233
300±20 220
53.8
71

AC/N(Blue)
AC/L(Brown) tc 90
PE (Green/Yellow) SJOW 17AWGx3C

32
SJOW 17AWGx2C
&H05RN-F 1.0mm 2 &05RN-F 1.0mm
2

4-ψ4.5

tc : Max. Case Temperature

◎ Note1: Please connect the case to PE for the complete EMC deliverance and safety use.
◎ Note2: Please contact MEAN WELL for input wiring option with PE.

INSTALLATION MANUAL
Please refer to : http://www.meanwell.com/manual.html

File Name:ELG-200-SPEC 2018-09-30