PRODUCT DATA SHEET

SikaGrout®-214-11
SHRINKAGE COMPENSATED, PUMPABLE, CEMENTITIOUS GROUT

DESCRIPTION CHARACTERISTICS / ADVANTAGES

SikaGrout®-214-11 is shrinkage compensated, self- SikaGrout®-214-11 is economical and easy to use.
levelling, pre-mixed cementitious grouting mortars Other beneficial properties are:
with extending working time to suit local ambient ▪ Excellent flowability;
temperature. ▪ Good dimensional stability;
▪ High strength, adjustable consistency;
USES ▪ No bleeding;
▪ Non toxic, non corrosive;
SikaGrout®-214-11 is suitable for the following ▪ Ready to use, requires only the addition of water;
grouting works: ▪ Impact and vibration resistant;
▪ Machine foundations; ▪ Can be placed with suitable grout pump.
▪ Rails beds;
▪ Columns in precast construction; APPROVALS / STANDARDS
▪ Anchor bolts;
▪ Bridge bearings; ▪ Local test report is available
▪ Cavities;
▪ Gaps;
▪ Recesses;
▪ High strength repair.

PRODUCT INFORMATION
Packaging 25 kg bag
Appearance / Colour Powder / Concrete grey
Shelf life 6 months from date of production if stored properly in unopened, original
packaging
Storage conditions Dry, cool, shaded place
Density ~ 1.60 kg/l (bulk density of powder)
~ 2.20 kg/l (density of fresh mortar)

TECHNICAL INFORMATION

Product Data Sheet

SikaGrout®-214-11
August 2017, Version 01.01
020201010010000133

1/3
Compressive Strength 1 day ≥ 25 N/mm² (ASTM C349 / C109)
3 days ≥ 41 N/mm²
7 days ≥ 52 N/mm²
28 days ≥ 60 N/mm²
At 27 °C

Expansion ≥0.1 % (ASTM C940 - 89)

At 27 °C / 65 % r.h (at 3h)

APPLICATION INFORMATION
Mixing ratio SikaGrout®-214-11 : Water = 1 : 0.13-0.15 (parts by weight)
Water content: 13-15 %
Consistency: Water requirement can be from 3.25 to 3.75 litres per 25 kg
bag depending on the required consistency.
At 27 °C / 65 % r.h

Yield 1 bag yields approx. 13.10 litres of mortar

Approx. 76 bags required for 1 (one) m³ of mortar
Layer Thickness Min. gap: 10 mm
Max. gap: Please contact Sika Technical Service Department
Flowability Flow table spread 25–32 cm (ASTM C230-90, no
strokes)
At 27 °C / 65 % r.h

Ambient Air Temperature Min. 10 °C

Max. 40 °C
Setting Time Initial setting time ≥5h (ASTM C403 - 90)
Final setting time ≤ 12 h
At 27 °C / 65 % r.h

APPLICATION INSTRUCTIONS second operation. Ensure continuous flow of mortar.

Grouting base plate
SUBSTRATE QUALITY / PRE-TREATMENT Prewetting for approx. 24 hours, no standing water.
Maintain constant hydro-static pressure to continuous
Concrete surfaces should be clean, sound and free flow. Use steel rods or chain to make sure that all cav-
from oil, grease, laitance and loose particles. ities are filled. Make sure that entrapped air can es-
Metal surfaces (iron and steel) should be free from cape easily.
scale, rust, oil and grease. Grouting of large cavities / large volume
Absorbent substrates must be saturated thoroughly, Depending on the volume to be filled and thickness of
but no standing water. gap, large aggregates, e.g. 4–8 mm, 8–16 mm or 16–32
mm may be added to the SikaGrout®-214-11 at a ratio
MIXING of between 50-100% by weight of SikaGrout®-214-11
powder. Round aggregates are more suitable than
Powder should be added to the pre-gauged water to
crushed ones.
suit the desired consistency.
As a rule of thumb, minimum thickness of gap to be
Mix mechanically for at least 3 minutes with a low
grouted shall be 3 times max. grain size diameter of
speed electric drill (max. 500 r.p.m.) with a disc agitat-
aggregate.
or attached, until a smooth consistency is achieved.
For grouting large section thicker than 60 mm, addi-
Mixing equipment such as two arms, forced action
tion of large aggregate and/or use of cold water will
basket/pan type mixer can also be used.
minimize temperature rise generated during early
APPLICATION hardening period.
Special anchoring (rock bolt in tunnels). Please consult
Pour mortar after mixing. Ensure that air entrapped in- Sika for additional information on anchoring and
to the grout is allowed to escape. When carrying out grouting products.
base plate grouting, ensure sufficient pressure head is
maintained to keep mortar flow uninterrupted. CURING TREATMENT
Make sure that necessary form work is firmly in place
Keep visible, free mortar surface as small as possible
and watertight. To achieve optimum expansion result,
and protect it from premature drying out by standard
apply mortar as quickly as possible.
curing practice (keep moist, cover with wet hessian,
Grouting of machine beds
use of curing compound e.g. Antisol® E).
Pre-wet thoroughly, no standing water in bolt holes. If
possible, grout anchor first, and the mortar bed in the

Product Data Sheet

SikaGrout®-214-11
August 2017, Version 01.01
020201010010000133

2/3
CLEANING OF TOOLS LEGAL NOTES
Clean all tools and equipment with water immediately The information, and, in particular, the recommenda-
after use. tions relating to the application and end-use of Sika
Hardened mortar can only be removed mechanically. products, are given in good faith based on Sika's cur-
rent knowledge and experience of the products when
IMPORTANT CONSIDERATION properly stored, handled and applied under normal
conditions in accordance with Sika's recommenda-
Minimum application temperature is 10 °C. At temper- tions. In practice, the differences in materials, sub-
ature lower than 20 °C setting time and strength gain strates and actual site conditions are such that no war-
will be slower. ranty in respect of merchantability or of fitness for a
Normal curing practice should be observed for at least particular purpose, nor any liability arising out of any
3 days wherever mortar is exposed. legal relationship whatsoever, can be inferred either
In case of grouting large cavities/volume, SikaGrout®- from this information, or from any written recom-
214-11 is the most suitable mendations, or from any other advice offered. The
user of the product must test the product’s suitability
BASIS OF PRODUCT DATA for the intended application and purpose. Sika re-
serves the right to change the properties of its
All technical data stated in this Product Data Sheet are
products. The proprietary rights of third parties must
based on laboratory tests. Actual measured data may
be observed. All orders are accepted subject to our
vary due to circumstances beyond our control.
current terms of sale and delivery. Users must always
The strength values mentioned are average values of
refer to the most recent issue of the local Product Data
laboratory tests.
Sheet for the product concerned, copies of which will
The results on the site may vary due to different envir-
be supplied on request.
onment, curing conditions and testing.
Trials should be always conducted before application.
Always refer to the latest updated product data sheet.

LOCAL RESTRICTIONS
Please note that as a result of specific local regula-
tions the declared data for this product may vary from
country to country. Please consult the local Product
Data Sheet for the exact product data.

ECOLOGY, HEALTH AND SAFETY

Ecology: Do not dispose into water
Transporttation class: Non-hazardous
Waste disposal: According to local law
Important notes: SikaGrout®-214-11 is cement base
and is therefore alkaline. Suitable precautions should
be taken to minimize direct contact with the skin. If
the material gets into the eyes, rinse immediately with
clean water and seek medical attention.

Sika Limited (Vietnam)

Nhon Trach 1 Industrial Zone,
Nhon Trach Dist., Dong Nai Province,
Tel: (84-251) 3560 700
Fax: (84-251) 3560 699
sikavietnam@vn.sika.com
vnm.sika.com

SikaGrout-214-11-en-VN-(08-2017)-1-1.pdf

Product Data Sheet

SikaGrout®-214-11
August 2017, Version 01.01
020201010010000133

3/3