sikagrout_-318

PRODUCT DATA SHEET
SikaGrout®-318
NON-SHRINK, HIGH STRENGTH, CEMENTITIOUS GROUT
DESCRIPTION CHARACTERISTICS / ADVANTAGES

SikaGrout®-318 is a ready to use, shrinkage ▪ Good flowability
compensated, non ferrous, high strength, self- ▪ Good dimensional stability
levelling, bearing grout. Pre-mixed with selectively ▪ Controlled expansion
graded materials result in a dense homogeneous mix. ▪ Chlorides-free; will not rust, bleed, or harm metal on
contact
USES ▪ High early compressive strength; allows earlier load-
ing and minimizes costs
SikaGrout®-318 is designed to counteract the normal ▪ High early strength produces minimal downtime for
shrinkage of mortar and concrete and to absorb and maintenance and repairs
minimize effects of vibration on foundations. The high ▪ Non toxic, non corrosive
early strength property is suitable for work that re- ▪ Ready and easy to use
quires early loads including machine bases structural ▪ Economical
columns, prestressed girders, bridge bearings, rail
posts and seatings bolts etc.
PRODUCT INFORMATION
Packaging 25 kg bag
Appearance / Colour Powder / Concrete grey
Shelf life Min. 6 months if stored properly in unopened, original packaging
Storage conditions Dry, cool, shaded place
Density ~ 1.60 kg/l (bulk density of powder)
~ 2.20 kg/l (density of fresh mortar)
TECHNICAL INFORMATION
Compressive Strength 1 day ≥ 40 N/mm² (ASTM C349 - 95)
28 days ≥70 N/mm²
(At 27 °C)
Expansion > 0.1 %

At 3 hours
Product Data Sheet

SikaGrout®-318
July 2017, Version 01.02
020201010010000006
1/3
APPLICATION INFORMATION
Mixing ratio Water : SikaGrout® = 1 : 8 (parts by weight)
~ 3.125 litres of clean water per 25 kg bag
Yield 1 bag yields approx. 13.10 litres of mortar
Approx. 77 bags required for 1 m3 (one) of mortar
Layer Thickness Min. gap: 25 mm
Max. gap: 80 mm
Substrate Temperature +10 °C minimum / +40 °C maximum
Minimum application temperature is 10 °C. At temperature lower than 20
°C setting time and strength gain will be slower. Normal curing practice
should be observed for at least 3 days wherever mortar is exposed.
APPLICATION INSTRUCTIONS CURING TREATMENT
SUBSTRATE QUALITY / PRE-TREATMENT Keep visible, free mortar surface as small as possible
and protect it from premature drying out by standard
Concrete surfaces should be clean, sound and free curing practice (keep moist, cover with wet hessian,
from oil, grease, laitance and loose particles. use of curing compound e.g. Antisol® E).
Metal surfaces (iron and steel) should be free from
scale, rust, oil and grease. CLEANING OF TOOLS
Absorbent substrates must be saturated thoroughly, Clean all tools and equipment with water immediately
but no standing water. after use.
MIXING Hardened mortar can only be removed mechanically.
Powder should be added to the pre-gauged water to BASIS OF PRODUCT DATA

suit the desired consistency.
Mix mechanically for at least 3 minutes with a low All technical data stated in this Product Data Sheet are
speed electric drill (max. 500 r.p.m.) with a disc based on laboratory tests. Actual measured data may
agitator attached, until a smooth consistency is vary due to circumstances beyond our control.
achieved. The strength values mentioned are average values of
Mixing equipment such as two arms, forced action laboratory tests.
basket/pan type mixer can also be used. The results on the site may vary due to different envir-
onment, curing conditions and testing.
APPLICATION Trials should be always conducted before application.
Always refer to the latest updated product data sheet.
Pour mortar after mixing. Ensure that air entrained in-
to the grout is allowed to escape. When carrying out LOCAL RESTRICTIONS
base plate grouting, ensure sufficient head of pres-
sure is maintained to keep mortar flow uninterrupted. Please note that as a result of specific local regula-
Make sure that necessary form work is firmly in place tions the declared data for this product may vary from
and watertight. To achieve optimum expansion result, country to country. Please consult the local Product
apply mortar as quickly as possible (preferably within Data Sheet for the exact product data.
15 minutes after mixing).
Grouting of machine beds ECOLOGY, HEALTH AND SAFETY
Pre-wet thoroughly, no standing water in bolt holes. If
possible, grout anchor first, and the mortar bed in the Ecology: Do not dispose into water
second operation. Ensure continuous flow of mortar. Transportation class: Non-hazardous
Grouting base plate Waste disposal: According to local law
Prewetting for approx. 24 hours, no standing water. Important notes: Sikagrout® is cement base and is
Maintain constant hydro-static pressure to continuous therefore alkaline. Suitable precautions should be
flow. Use steel rods or chain to make sure that all cav- taken to minimize direct contact with the skin. If the
ities are filled. Make sure that entrapped air can es- material gets into the eyes, rinse immediately with
cape easily. clean water and seek medical attention.
Grouting of large cavities / large volume
Please contact Sika Technical Service Department for
further advice.
Product Data Sheet

SikaGrout®-318
020201010010000006
2/3
LEGAL NOTES
The information, and, in particular, the recommenda-
tions relating to the application and end-use of Sika
products, are given in good faith based on Sika's cur-
rent knowledge and experience of the products when
properly stored, handled and applied under normal
conditions in accordance with Sika's recommenda-
tions. In practice, the differences in materials, sub-
strates and actual site conditions are such that no war-
ranty in respect of merchantability or of fitness for a
particular purpose, nor any liability arising out of any
legal relationship whatsoever, can be inferred either
from this information, or from any written recom-
mendations, or from any other advice offered. The
user of the product must test the product’s suitability
for the intended application and purpose. Sika re-
serves the right to change the properties of its
products. The proprietary rights of third parties must
be observed. All orders are accepted subject to our
current terms of sale and delivery. Users must always
refer to the most recent issue of the local Product Data
Sheet for the product concerned, copies of which will
be supplied on request.
Sika Limited (Vietnam)

Nhon Trach 1 Industrial Zone,
Nhon Trach Dist., Dong Nai Province,
Tel: (84-251) 3560 700
Fax: (84-251) 3560 699
sikavietnam@vn.sika.com
vnm.sika.com
SikaGrout-318-en-VN-(07-2017)-1-2.pdf
Product Data Sheet

SikaGrout®-318
020201010010000006
3/3

sikagrout_-318

Uploaded by

Copyright:

Available Formats

sikagrout_-318

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

sikagrout_-318

Uploaded by

Copyright:

Available Formats

PRODUCT DATA SHEET

DESCRIPTION CHARACTERISTICS / ADVANTAGES

Expansion > 0.1 %

Product Data Sheet

APPLICATION INSTRUCTIONS CURING TREATMENT

Powder should be added to the pre-gauged water to BASIS OF PRODUCT DATA

Product Data Sheet

Sika Limited (Vietnam)

Product Data Sheet

You might also like