Nitration Grade Xylene: Standard Specification For

This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles
for the
Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
Designation: D843 − 17
Standard Specification for

Nitration Grade Xylene1
This standard is issued under the fixed designation D843; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
1. Scope D3437 Practice for Sampling and Handling Liquid Cyclic

1.1 This specification covers nitration grade xylene. Products
D5386 Test Method for Color of Liquids Using Tristimulus
1.2 The following applies to all specified limits in this Colorimetry
standard: for purposes of determining conformance with this D6563 Test Method for Benzene, Toluene, Xylene (BTX)
standard, an observed value or a calculated value shall be Concentrates Analysis by Gas Chromatography
round off “to the nearest unit” in the last right-hand digit used D8005 Test Method for Color of Clear Liquids (Platinum-
in expressing the specification limit, in accordance with the Cobalt Scale)
round-off method of Practice E29. E29 Practice for Using Significant Digits in Test Data to
1.3 The values stated in SI units are to be regarded as Determine Conformance with Specifications
standard. The values given in parentheses are for information E2680 Test Method for Appearance of Clear, Transparent
only. Liquids (Visual Inspection Procedure)
1.4 Consult OSHA regulations, supplier’s Safety Data 2.2 Other Document:
Sheets, and local regulations for all materials used in this OSHA Regulations, 29 CFR paragraphs 1910.1000 and
specification. 1910.1200 3
1.5 This international standard was developed in accor- 3. Properties
dance with internationally recognized principles on standard- 3.1 Nitration grade xylene shall conform to the following
ization established in the Decision on Principles for the requirements:
Development of International Standards, Guides and Recom- ASTM Test
mendations issued by the World Trade Organization Technical Property Specification
MethodA
Barriers to Trade (TBT) Committee. Nonaromatic hydrocarbons, max, volume % 4.0 D6563
Acid wash color, max pass with 6 D848
Copper corrosion pass (1A or 1B) D849
2. Referenced Documents Appearance, free of haze, particulates pass E2680
or suspended matter particles
2.1 ASTM Standards:2 Color, Pt/Co scale, max 20 D5386 or
D848 Test Method for Acid Wash Color of Industrial Aro- D8005
matic Hydrocarbons Distillation range at 101.3 kPa (760 mm Hg 5 D850
pressure), max,°C
D849 Test Method for Copper Strip Corrosion by Industrial Initial distillation temperature, min,°C 137 D850
Aromatic Hydrocarbons Dry point, max,°C 143 D850
D850 Test Method for Distillation of Industrial Aromatic
A
Hydrocarbons and Related Materials If more than one method is listed, the producer and user should agree on the
referee method.
4. Sampling
1
This specification is under the jurisdiction of ASTM Committee D16 on
Aromatic, Industrial, Specialty and Related Chemicals and is the direct responsi-
4.1 The material shall be sampled in accordance with
bility of Subcommittee D16.01 on Benzene, Toluene, Xylenes, Cyclohexane and Practice D3437.
Their Derivatives.
Current edition approved June 1, 2017. Published June 2017. Originally 5. Keywords
approved in 1945. Last previous edition approved in 2016 as D843 – 16. DOI:
10.1520/D0843-17.
5.1 xylene
2
For referenced ASTM standards, visit the ASTM website, www.astm.org, or
3
contact ASTM Customer Service at service@astm.org. For Annual Book of ASTM Available from U.S. Government Printing Office Superintendent of Documents,
Standards volume information, refer to the standard’s Document Summary page on 732 N. Capitol St., NW, Mail Stop: SDE, Washington, DC 20401, http://
the ASTM website. www.access.gpo.gov.
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States
1
D843 − 17
ASTM International takes no position respecting the validity of any patent rights asserted in connection with any item mentioned
in this standard. Users of this standard are expressly advised that determination of the validity of any such patent rights, and the risk
of infringement of such rights, are entirely their own responsibility.
This standard is subject to revision at any time by the responsible technical committee and must be reviewed every five years and
if not revised, either reapproved or withdrawn. Your comments are invited either for revision of this standard or for additional standards
and should be addressed to ASTM International Headquarters. Your comments will receive careful consideration at a meeting of the
responsible technical committee, which you may attend. If you feel that your comments have not received a fair hearing you should
make your views known to the ASTM Committee on Standards, at the address shown below.
This standard is copyrighted by ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959,
United States. Individual reprints (single or multiple copies) of this standard may be obtained by contacting ASTM at the above
address or at 610-832-9585 (phone), 610-832-9555 (fax), or service@astm.org (e-mail); or through the ASTM website
(www.astm.org). Permission rights to photocopy the standard may also be secured from the Copyright Clearance Center, 222
Rosewood Drive, Danvers, MA 01923, Tel: (978) 646-2600; http://www.copyright.com/

Nitration Grade Xylene: Standard Specification For

Uploaded by

Copyright:

Available Formats

Nitration Grade Xylene: Standard Specification For

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Nitration Grade Xylene: Standard Specification For

Uploaded by

Copyright:

Available Formats

This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles

Standard Specification for

1. Scope D3437 Practice for Sampling and Handling Liquid Cyclic

You might also like