coax® data sheet - coaxial valve

type MK 15
FK 15

08/2022
2/2-way valve direct acting
pressure range PN 0-100 bar
orifice DN 15 mm
connection thread/flange
function valve B
a b
normally closed a b

symbol NC A

valve B
a b
normally open a b

symbol NO A

operating principle pressure balanced, with spring return

Above stated body materials refer body material ① brass ② steel galvanized
to the valve port connections that get in ③ brass, nickel plated ⑤ without non-ferr. Metals
contact with the media only!
④ steel, nickel plated ⑥ stainless steel
⓪ aluminium
valve seat synthetic materials on metal
seal materials NBR PTFE, FPM, CR, EPDM

general specifications options

details needed
■ orifice ports MK threads G 3/8 - G 3/4 special threads
FK flanges PN 16 / 40 / 100 special flanges
■ port function NC NO
■ function NC/NO pressure range bar 0-16 / 0-40 / 0-63 | 0-100 > 100 bar upon request
■ operating pressure
■ flow rate Kv value m³/h 6.0 | 2.5
vacuum leak rate < 10-6 mbar•l•s-1
■ media pressure-vacuum P1 P2 upon request
■ media temperature back pressure P2 > P1 available (max. 16 bar)
■ ambient temperature media gaseous - liquid - highly viscous -
gelatinous - contaminated
■ nominal voltage abrasive media upon request
damping opening
closing available
flow direction AB as marked bi-directional (max. 16 bar)
switching cycles 1/min 200
switching time ms opening 80
closing 80
media temperature °C DC: -20 to +100 -40 to +160
AC: -20 to +100 -40 to +160
ambient temperature °C DC: -20 to +80
AC: -20 to +80
limit switches inductive / mechanical
manual override available
approvals LR/DNV/WAZ
mounting mounting brackets
weight kg MK 3.8 FK 5.0
additional equipment upon request
The valves‘ technical design is based
on media and application requirements.
This can lead to deviations from the electrical specifications options
general specifications shown on the data
sheet with regards to the design, sealing nominal voltage Un DC 24 V +5%/-10% special voltage upon request
materials and characteristics. Un AC 230 V +5%/-10% 40-60 Hz special voltage upon request
actuation DC direct-current magnet
AC direct-current magnet with integrated above 100 °C with separate rectifier
rectifier

insulating rating H 180°C

protection IP65
If order or application specifications energized duty rating ED 100%
are incomplete or imprecise there exists connection plug acc. DIN EN 175301-803 form A, 4 terminal box M16x1,5
a risk of an incorrect technical design positions x90° / wire diameter 6-8 mm
of the valve for the required application.
As a consequence, the physical and / or optional M12x1 connector acc. DESINA connector acc. VDMA
chemical properties of the materials or additional equipment illuminated plug with varistor
seals used, may not be suitable for the current consumption N-coil DC 24 V 1.67 A
intended application. To avoid hydraulic AC 230 V 40-60 Hz 0.15 A
shocks in pipelines, the flow velocities H-coil DC 24 V 2.29 A
must be taken into account when AC 230 V 40-60 Hz 0.24 A
designing valves for liquids. explosion proof terminal box M16x1,5
II 3G Ex ec IIC T3 Ta -20…+80°C Gc
II 3D Ex tc IIIC T195°C Ta -20…+80°C Dc
II 3G Ex h IIC T3 Gc
II 3D Ex h IIIC T195°C Dc
limit switches inductive (I) normally open-PNP
inductive (B) normally open-PNP
mechanical single pole double throw-SPDT

■ specifications not highlighted are standard

specifications highlighted in grey are optional

müller co-ax gmbh • Friedrich-Müller-Str. 1 • 74670 Forchtenberg • Germany • fon +49(0)7947/828-0 • fax +49(0)7947/828-11 • Email info@co-ax.com
 coax® data sheet - coaxial valve
type MK 15
FK 15

function: NC
closed when not energized


6:


$ %
*


 /  
/ 

constructive length L1 L2 L3
standard 184 133 241
with inductive limit switches 224 173 281
with manual override / inductive limit
224 173 281
switches
with mechanical limit switches 224 173 281

flanges PN DIN ØD Øk Ød

16 EN 1092-1 95 65 14

40 EN 1092-1 95 65 14

100 EN 1092-1 105 75 14

function: NO
open when not energized




$ %



 /  

/ 

'

müller co-ax shall retain the rights to these documents. Modifications to the documents are strictly prohibited.
Rights reserved to make technical alterations • Not responsible for printing errors • Detailled drawings can be obtained upon request