C15 ACERT® 328-443 bkW

Petroleum (440-595 bhp)

Engine 2100 rpm

Dry Manifold
CAT® ENGINE SPECIFICATIONS
I-6, 4-Stroke-Cycle-Diesel
Emissions.. . . . . EPA and CARB Non-Road Mobile Tier 3,
EU Stage IIIA
Peak Torque at Speed.. . . . . . . . . . . . . . . . . . . . . . 1476 lbs-ft
Bore.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137.2 mm (5.4 in.)
Stroke. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 171 mm (6.75 in.)
Displacement.. . . . . . . . . . . . . . . . . . . . . . 15.2 L (928 cu. in.)
Aspiration.. . . . . . . . . . . . . . . . . . . Turbocharged-Aftercooled
Governor and Protection.. . . . . . . Electronic (ADEM™ A3)
Engine Weight, net dry (approx).. . . . . . . 1245 kg (2743 lb)
Capacity for Liquids
Lube Oil System (refill).. . . . . . . . . . . . . . . . . 38 L (10 gal)
Cooling System.. . . . . . . . . . . . . . . . . . . . . . 20.8 L (5.5 gal)
Image is a representation only, and Oil Change Interval.. . . . . . . . . . . . . . . . . . . . . . . . . . 250 hours
may show optional attachments.
Rotation (from flywheel end). . . . . . . . . . Counterclockwise
Flywheel and Flywheel
Housing.. . . . . . . . . . . . . . . . . . . . SAE No. 0 or SAE No. 1
Flywheel Teeth. . . . . . . . . . . . . . . 136 (SAE 0), 113 (SAE 1)

FEATURES
Engine Design Full Range of Attachments
- Proven reliability and durability Large variety of factory-installed engine attachments
- Robust diesel strength design prolongs life and lowers reduces packaging time
owning and operating costs Testing
- Broad operating speed range. Every engine is full-load tested to ensure proper engine
- PTO drive options provide flexible access to auxiliary performance.
power for pumps and other needs
Product Support Offered Through Global Cat Dealer
Advanced Digital Engine Management Network
ADEM A3 control system providing integrated ignition, More than 2,200 dealer outlets
speed governing, protection, and controls, including Cat factory-trained dealer technicians service every
detonation-sensitive variable ignition timing. ADEM A3 aspect of your petroleum engine
has improved: user interface, display system, shutdown
Cat parts and labor warranty
controls, and system diagnostics.
Preventive maintenance agreements available for repair-
Optional Attachments before-failure options
- Engine-Mounted Transmission Oil Cooler —
S•O•SSM program matches your oil and coolant samples
integration with engine cooling system allows ease of
against Caterpillar set standards
installation and a tighter overall engine package
- Engine Brakes — braking capabilities for mobile Over 80 Years of Engine Manufacturing Experience
applications Ownership of these manufacturing processes enables
Caterpillar to produce high quality, dependable products.
Custom Packaging
- Cast engine blocks, heads, cylinder liners, and flywheel
For any petroleum application, trust Caterpillar to meet
housings
your exact needs with a factory custom package. Cat®
- Machine critical components
engines, generators, enclosures, controls, radiators,
- Assemble complete engine
transmissions — anything your project requires — can be
custom designed and matched to create a one-of-a kind Web Site
solution. Custom packages are globally supported and For all your petroleum power requirements, visit .
are covered by a one-year warranty after startup. www.catoilandgas.cat.com.
Transmissions
Caterpillar has a full line of engine-transmission packages
that can be fully integrated with your axle, hydraulics, and
operator interface. Cat transmissions deliver continuous
operation under full load, smooth shifting at any speed,
and maximum up time, with unmatched durability and
easy maintenance.

LEHW0061-00 Page 1 of 4
Supersedes LEHW4782-00
 C15 ACERT® PETROLEUM ENGINE
328-443 bkW (440-595 bhp)

standard equipment
Air Inlet System Lube System
Single turbocharger, mid-mounted, inlet 152.4 mm (6 in), Crankcase breather — rear valve cover
hose connection Oil cooler — RH
Control System Oil filter — RH
Electronic governing, PTO speed control Oil pan — front sump
Programmable ratings Oil filler — LH front
Cold mode start strategy Oil dipstick — LH front
Automatic altitude compensation Oil pump
Power compensation for fuel temperature Oil valve sampling — on oil filter base
Programmable low and high idle and TEL Mounting System
Electronic diagnostics and fault logging Front support (shipping only)
Engine monitoring and protection system (speed, Power Take-Offs
temperature, pressure) Crankshaft pulley, 203.2 mm (8 in), 3 grooves 292.1 mm
J1939 Broadcast (diagnostic, engine status, and control) (11.5 in) 1 groove, all 15.9 mm (.63 in) width
Cooling System Hydraulic pump drive, SAE A, 11 tooth
Thermostats and housing — outlet vertical General
Jacket water pump — gear-driven, centrifugal, RH Vibration damper
RH front water pump inlet Paint — Cat yellow
All plugs/fittings are STOR for lines gp water Lifting eyes
Exhaust System Automatic variable timing, electronic
Exhaust manifold — dry Electronic installation kit 70-pin connector (connectors,
Front turbo exhaust pins, sockets)
Full marmon connection, maximum load 10 kg for direct Literature group owner and operator
connection to turbo Mandatory Options
Flywheels and Flywheel Housings Throttle position sensor
See Mandatory Options Exhaust system — front or rear
Fuel System Flywheel housing or rear PTO
MEUI system Primary filter/water separator
Fuel filter, secondary, mid-mount (LH 2 micron high
performance)
Fuel transfer pump, LH front
Fuel priming pump, LH mid-mount
Fuel sample valve, mounted on fuel filter base

OPTIONAL ATTACHMENTS
Transmission Arrangement Cooling System
Transmission cooler Radiator — installed
Tool set Radiator — ship loose
Air Compressor Fan drive f/u/w Caterpillar installed radiator
Air chambers Fan drives for customer-supplied radiators
Air compressor governor Fan height instructions
Vee belts for customer-supplied radiators
Air Inlet System
Aftercooler lines f/u/w Caterpillar installed radiator
Air cleaners
Rear-facing exhaust
Precleaners
Aftercooler lines
Air lines
Suction fan adapters — attaches fan to fan pulley
Air inlet gasket
Blower fan adapter — attaches fan to fan pulley
Charging System Blower fan
Charging alternators Suction fan
Alternator mountings Fan belt tightener
Alternator wiring Coolant level sensor
Circuit breaker mountings Dry charge coolant conditioners
Alternator belt guard Dry charge coolant conditioner element
Exhaust System
Turbo exhaust connection
Flexible fitting
Elbows
Flanges
Dry elbow
LEHW0061-00 Page 2 of 4
Supersedes LEHW4782-00
 C15 ACERT® PETROLEUM ENGINE
328-443 bkW (440-595 bhp)

PERFORMANCE curves
Turbocharged-Aftercooled
D Rating — 433 bkW (580 bhp) @ 2100 rpm*
DM7771-01

Torque 2648 1953

Torque
2421 1786
N•m

lb-ft
2194 1618
1967 1451

432 580
Engine Power

Engine Power
372 499

bhp
bkW

312 419
252 338

240 .394

lb/bhp-hr
g/bkW-hr

BSFC
234 .385
BSFC

228 .376
223 .367

1200 1400 1600 1800 2000 2200

Engine Speed - rpm

Heat Rejection Data

Engine Speed Engine Power Rej to JW Rej to Atmos Rej to Exh From Aft Clr
rpm bkW bhp bkW Btu/min bkW Btu/min bkW Btu/min bkW Btu/min
2100 432.5 580.0 168 9554 123 6995 502 28549 91.8 5220.7
2000 432.5 580.0 157 8929 114 6483 485 27582 88.2 5015.9
1900 432.5 580.0 155 8815 120 6824 483 27468 86.1 4896.5
1800 432.5 580.0 153 8701 116 6597 471 26786 84.0 4771.1
1700 427.6 573.4 152 8644 103 5858 449 25535 78.0 4435.9
1600 418.3 560.9 149 8474 101 5744 430 24454 73.5 4179.9
1500 405.6 543.9 148 8417 102 5801 417 23715 70.9 4032.1
1400 388.3 520.7 140 7962 96 5460 389 22122 66.2 3764.8
1300 346.5 464.7 125 7109 92 5232 335 19051 59.9 3406.5
1200 288.0 386.2 110 6256 106 6028 296 16833 48.4 2752.5
1100 252.3 338.3 96 5460 101 5744 249 14161 30.4 1728.8

*Other engine ratings are available. Please contact dealer for performance data.

LEHW0061-00 Page 3 of 4
Supersedes LEHW4782-00
 C15 ACERT® PETROLEUM ENGINE
328-443 bkW (440-595 bhp)

PETROLEUM ENGINE

1377 mm 927 mm
54.2 in. 36.5 in.

1227 mm
48.3 in.

Right Side View Front View

Engine Dimensions Note: Do not use for installation design. See
general dimension drawings for detail
Length 1377 mm 54.2 in
(Drawing #317-6069).
Width 927 mm 36.5 in
Height 1227 mm 48.3 in
Engine Weight (dry) 1245 kg 2743 lb

RATING definitions and CONDITIONS

Engine Performance is corrected to inlet air standard The corrected performance values shown for Cat engines
conditions of 99 kPa (29.31 in. Hg) dry barometer and will approximate the values obtained when the observed
25°C (77°F) temperature. These values correspond to performance data is corrected to SAE J1995, ISO 3046-2,
the standard atmospheric pressure and temperature as ISO 8665, ISO 2288, ISO 9249, ISO 1585, EEC 80/1269,
shown in SAE J1995. and DIN 70020 standard reference conditions.

Performance measured using a standard fuel with fuel IND-D

gravity of 35 degrees API having a lower heating value of For service where maximum power is required for
42,780 kJ/kg (18,390 BTU/lb) when used at 29°C (84.2°F) periodic overloads.
where the density is 838.9 g/L (7.001 lb/U.S. gal).

Information contained in this publication may be considered confidential. Discretion is recommended when distributing.
Materials and specifications are subject to change without notice. The International System of Units (SI) is used in this publication.
CAT, CATERPILLAR, their respective logos, ACERT, ADEM, S•O•S, “Caterpillar Yellow” and the “Power Edge” trade dress,
as well as corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.
Performance Number: DM7771-01 ©2010 Caterpillar
LEHW0061-00 (2-10) All rights reserved
Supersedes LEHW4782-00
.