Premier 520

Transformer operated smart energy meter Security Upgradeable AMI ready

$
$

Import/export Revenue Interoperable

Premier 520 is a new generation, three-phase metering protection communication
transformer operated smart electricity meter. It’s
equipped with a bi-directional communication unit to
interact with the Head-End System (HES) and plays a
vital role in cost management.
It supports 4G communication that ensures network
redundancy by having GPRS as a fall-back option to
suppress the black spots in the AMI network.
It also works as a common assets in import-export or
forwarded mode. The firmware can be upgraded
remotely without affecting the usual meter
operations.

This smart meter is combination of a reliable, secured

metering platform and a smart 4G communication
unit, making it ideal for a smart metering-connected
solution. It provides billing energies, history values,
interval data and event alerts to the utility for billing
cycle optimisation, effective network planning and
revenue protection.

Application Features

• Industrial and commercial consumer segment • Four quadrant energy measurement

• Distribution transformer metering • Intuitive, legible and user-friendly display
• MV feeder and boundary metering • Back-end alerts and event logging on tampers
• Renewable farms / Net metering • Actuators for display access
• Enable meter data collection through optical port
for no-WAN nodes
Benefits • Analysis of interval data.
• Local reading provision in the absence of mains
• Periodic remote data availability from all smart • Parameters in line with IS 15959 part 3
endpoints improves billing efficiency • Supply quality parameters
• On-demand data collection to serve critical utility
use cases, e.g. vigilance etc.
• Network parameters monitoring helps to improve Highlights
network assets planning
• Better utilisation of field crew by having power • Reliable bi-directional communication unit
down information of specific node point • Data delivery through smart push architecture
• Compatible for import-export or forwarded mode • Extensive firmware features to serve multiple
metering applications of utility
• Reduced operational cost (low cost of ownership) • Better security features for utility
• Revenue protection measures for detection and
analysis of tamper attempts
Premier 520
Technical Specification
Electrical
Connection type CT, CT / VT operated
Wiring configuration 3P4W for LT and HT
Rated voltage & variation LT: 240V P-N, -30% to +20% of Vref
HT: 63.5 P-N, ±20% of Vref
Current range -/5(10)A for LT and -/5(10)A or -/1(2)A for HT
Accuracy Class 0.5s for LT and Class 0.2s / Class 0.5s for HT
Frequency 50 Hz ± 5%
Burden As per IS 16444 Part 2

Compliance
Standards IS 16444 Part 2, IS 15959 Part 3

Mechanical
Dimension H x W x D (approx.) 285 mm x 179 mm x 70 mm, Tolerance ±5mm
Weight (approx.) 1.35 ± 0.2 Kg
Enclosure Engineering Plastic
Sealing Break to open enclosure, Provision of sealing on meter
cover, terminal cover, communication module cover and
optical port

Environmental
Ingress protection IP 54
Temperature 0 °C to +55 °C (Operating) and -25 °C to +70 °C (Storage)
Humidity 95% non-condensing RH

Features

Energy channels as per category D3 and D4 of IS 15959 part 3

Maximum demand as per category D3 and D4 of IS 15959 part 3
Tariff rate registers as per category D3 and D4 of IS 15959 part 3
Load survey Up to 120 days load profile for 15 parameters (configurable),
with 30 minute integration period
Communication options Optical port for local and WAN (Cellular) communication
for remote data acquisition
Communication 4G fallback to 2G
SIM Card 4G enabled Nano SIM card
Antenna Inbuilt antenna, optional high gain extended antenna
Supported frequencies 850, 900, 1800, 2100 MHz

Africa Australia Europe India

africa@securemeters.com sales_australia@securemeters.com sales_eu@securemeters.com sales_india@securemeters.com

South East Asia, South Asia UAE UK

sales_sea@securemeters.com sales_uae@securemeters.com sales_uk@securemeters.com
www.securemeters.com
Liberty 200
Single-phase smart energy meter AMI ready Remote AES128
firmware upgrade encrypted security

The Liberty 200 smart meter is a part of the smart metering

system. It is a new generation, single-phase, smart
electricity meter with communications capability, including
DLMS / COSEM. It is equipped with a bi-directional
communication unit with provision for a range of
communication technologies, including RF or cellular
(NB-IoT/ GPRS) devices that allows it to interact with the
head end system (HES) for data collection and configuration
with adequate security.

It covers state-of-the-art smart functionality, coupled with

revenue protection capabilities, making it the ideal solution
for smart metering applications.

A built-in connect-disconnect switch and intelligent firmware

platform in the Liberty 200 can deliver smart metering use
cases of an energy supplier.

Application Features

• Residential metering • Reliable, bi-directional communication unit

• Small commercial metering • Four-quadrant metering with import / export
registration
• Connect-disconnect (load) switch with UC-3
Benefits performance
• Connect-disconnect switch in phase and neutral
• Easy integration with head-end system through • Secure data delivery to head end system (HES)
bi-directional comms and interoperable protocol • Intuitive, legible and user-friendly display
• Periodic remote data availability for utility reconciliation • Provision of different communication options - cellular
and monitoring (NBIoT / GPRS), RF
• Improved reading efficiency and elimination of billing • Capacitive touch keypad for ease of display navigation
errors through smart functionality • Extensive revenue protection measures
• On-demand data collection to serve critical use cases • Logging of tamper events and information alerts to
like vigilance the backend system
• No site visits to disconnect / reconnect consumer load • Quality of supply (QoS) monitoring
point • Supports remote firmware upgrade
• Enables efficient field operations to quickly restore • DLMS / COSEM open protocol compliant
faults by providing reliable, timely node-specific power • Terminal cover open, front cover-open, communication
interruption information module open detection
• Reduced cost of ownership
• Eliminates the cost of manual reading
• Designed to serve long life in the field
• Peak and off-peak management Software

• M-Cubed 100 software suite for meter configuration

and reading through optical port
Liberty 200

Technical specifications
Electrical
Connection type 1-phase 2-wire, direct connected
Rated voltage & variation 230 V, ± 10%
Maximum withstand voltage 440 V
Current range 10 A Ibasic, 100 A Imax
Accuracy Class 1.0
Frequency 50 Hz, ± 5%
Metrology LED One LED, Blinking on configured energy channel
Switch category UC3

Compliance
Standards IEC 62052-11, IEC 62053-21, IEC 62053-24, IEC 62052-31, IEC 62056 series
(DLMS / COSEM)

Mechanical
Dimensions W x H x D 150 mm X 252 mm X 67 mm ±5 mm
Weight 1.20 kg (approximately) with Cellular (NB-IoT / GPRS) comms module
Display 8-digit LCD with backlight and icons for status

Enclosure material
Meter case, terminal block Engineering Plastic
Sealing Break to open enclosure, Additional sealing provision on meter body,
terminal cover and communication module

Environmental
Ingress protection IP 54
Insulation class Protective class II
Operating temperature -10 °C to +60 °C
Storage temperature -25 °C to +70 °C
Humidity 95%, non-condensing

Data storage capacity

Energy / demand load profile One year (single channel) at 30-minute interval (configurable interval)

Communication
Specifications are subject to change without prior notice

Local IEC optical port

Communication interface RF or cellular (NB-IoT / GPRS)
Communication status Indication on LCD
Security AES128 encryption

Africa Australia Europe India

sales_africa@securemeters.com sales_australia@securemeters.com sales_eu@securemeters.com sales_india@securemeters.com

South East Asia, South Asia UAE UK

sales_sea@securemeters.com sales_uae@securemeters.com sales_uk@securemeters.com
www.securemeters.com
Liberty 500
Three-phase smart energy meter AMI ready Remote AES128
firmware upgrade encrypted security

The Liberty 500 smart meter is a part of the smart metering

system. It is a new generation, three-phase, smart
electricity meter with communications capability, including
DLMS / COSEM. It is equipped with a bi-directional
communication unit with provision for a range of
communication technologies, including RF or cellular (NB-IoT /
GPRS) devices that allow it to interact with the head end system
(HES) for data collection and configuration with adequate
security.

It covers state-of-the-art smart functionality, coupled with

revenue protection capabilities, making it the ideal solution for
smart metering applications.

A built-in connect-disconnect switch and intelligent firmware

platform in the Liberty 500 can deliver smart metering use
cases of an energy supplier.

Application Features

• Residential metering • Reliable, bi-directional communication unit

• Commercial metering (large and small) • Four-quadrant metering with
import / export registration
• Connect-disconnect switch with UC-3 performance
Benefits • Connect-disconnect switch in all three phases
• Data delivery to head end system (HES)
• Easy integration with head-end system through • Intuitive, legible and user-friendly display
bi-directional comms and interoperable protocol • Provision of different communication options - Cellular
• Periodic remote data availability for utility reconciliation (NBIoT / GPRS), RF
and monitoring • Capacitive touch keypad for ease of display navigation
• Improved reading efficiency and elimination of billing • Extensive revenue protection measures
errors through smart functionality • Logging of tamper events and information alerts to the
• On-demand data collection to serve critical use cases backend system
like vigilance • Quality of supply (QoS) monitoring
• No site visits to disconnect / reconnect consumer load • Supports remote firmware upgrade
point • DLMS / COSEM open protocol compliant
• Enables efficient field operations to quickly restore • Terminal cover open, front cover open, communication
faults by providing reliable, timely node-specific power module open detection
interruption information
• Reduced cost of ownership
• Eliminates the cost of manual reading
• Designed to serve long life in the field Software
• Peak and off-peak management
• M-Cubed 100 software suite for meter configuration
and reading through optical port
Liberty 500

Technical specifications
Electrical
Connection type 3-phase 4-wire, direct connected
Rated voltage & variation 3X230 V, ± 10%
Current range 10 A Ibasic, 100 A Imax
Accuracy Class 1.0
Frequency 50 Hz, ± 5%
Metrology LED Two LED for active and reactive energy
Switch category UC3

Compliance
Standards IEC 62052-11, IEC 62053-21, IEC 62053-24, IEC 62052-31, IEC 62056 series
(DLMS / COSEM)

Mechanical
Dimensions W x H x D 184 mm X 265 mm X 97 mm ±5 mm
Weight 1.85 kg (approximately)
Display 8-digit LCD with backlight and icons for status

Enclosure material
Meter case, terminal block Engineering Plastic
Sealing Break to open enclosure, Additional sealing provision on meter body,
terminal cover and communication module

Environmental
Ingress protection IP 54
Insulation class Protective class II
Operating temperature -10 °C to +60 °C
Storage temperature -25 °C to +70 °C
Humidity 95%, non-condensing

Data storage capacity

Energy / demand load profile One year (single channel) at 30-minute interval (configurable interval)

Specifications are subject to change without prior notice

Communication
Local IEC optical port
Communication interface RF or cellular (NB-IoT / GPRS)
Communication status Indication on LCD
Security AES128 encryption

Africa Australia Europe India

sales_africa@securemeters.com sales_australia@securemeters.com sales_eu@securemeters.com sales_india@securemeters.com

South East Asia, South Asia UAE UK

sales_sea@securemeters.com sales_uae@securemeters.com sales_uk@securemeters.com
www.securemeters.com