Image may differ from product. See technical specification for details.

Housing-bearing combination with accessories

SONL 220-520 + 22220 E

Housing-bearing combination with accessories

s This item is composed of several products, which need to be ordered separately.

The combination of SKF housings, bearings and accessories is an excellent choice for a
customized, reliable and sustainable solution for your shaft arrangement. SKF has a wide
range of high-quality housing designs and sizes to meet your specific challenge – including
specially designed housings for special applications. The bearings reflect SKF’s state-of-
the-art technology, providing the highest-quality bearings. You need to buy each part in the
combination separately.

Many variants
Customized combinations
Cost-efficient
Reliable
Sustainable
Technical specification

Associated products

Housing SONL 220-520

Seal kit for a through shaft TSO 220

Seal kit for a shaft end TSO 220 A

End cover ECO 220-520

Bearing  22220 E

Lock nut  KM 20

Lock washer  MB 20

Locating ring  2 x FRB 7/180

Dimensions

da 100 mm Shaft diameter

Ca 60 mm Width of bearing seat

Da 180 mm Diameter of bearing seat

A 186 mm Width

A1 130 mm Foot width

Distance housing centreline to oil level

A2 150 mm
gauge side face

AA 196 mm Width for shaft end arrangement

AB 206 mm Width for through shaft arrangement

d1 112 mm Outside diameter of seal

B1 80 mm Width of seal

s2 25 mm Distance shaft end to end cover

H 270 mm Height

H0 323 mm Height including eye bolt

 H1 145 mm Centre height of bearing seat

H2 50 mm Foot height

J 320 mm Distance between attachment bolts

J1 75 mm Distance between attachment bolts

L 400 mm Length

N 32 mm Length of attachment bolt hole

N1 26 mm Width of attachment bolt hole

Distance bearing centreline to seal end

S 103 mm
face

r 1.6 mm Radius of shaft fillet

SHAFT

ba 47 mm Distance bearing centre line to shaft end

bb 150 mm Distance shaft end to seal side face

bc 123 mm Width of shaft seat

db 98 mm Shaft diameter

dc min. 106 mm Shaft diameter

Ga M 100x2 Thread size on shaft end

Gb 26 mm Thread length on shaft end

DOWEL PINS

J6 350 mm Distance between dowel pins

N4 max. 8 mm Diameter of dowel pins

C I R C U L AT I N G O I L L U B R I C AT I O N S Y S T E M

Size of tapped oil inlet hole in housing

PG G 3/8
cap

Distance housing centre line to oil inlet,

P1 50 mm
housing cap

Distance housing centre line to oil inlet,

P2 47 mm
housing cap
 Size of tapped oil outlet hole in housing
RG G 3/4
base

Distance between oil outlets in housing

R1 144 mm
base

R2 22 mm Height of oil outlet position

Height housing bottom to oil level gauge

O1 97 mm
top

Distance housing centre line to oil level

O2 150 mm
gauge end

Breaking loads, housing

P55° 1 080 kN Breaking load

P90° 450 kN Breaking load

P120° 300 kN Breaking load

P150° 280 kN Breaking load

P180° 360 kN Breaking load

Pa 140 kN Breaking load

Yield point, cap bolts

 Q120° 440 kN Load carrying ability of cap bolts

Q150° 250 kN Load carrying ability of cap bolts

Q180° 220 kN Load carrying ability of cap bolts

Mounting information

Size of cap bolt M 12x90

Recommended tightening torque for cap

80 N·m
bolts

Recommended diameter for attachment

G 24 mm
bolts

Recommended tightening torque for

665 N·m
attachment bolts

Size of eye bolt M 12

Oil level 53 mm

Oil fill 0.4 l

Oil level 70 mm

Oil fill 0.6 l

Compatible products

Component

Spherical roller bearing with relubrication features 22220 E

Lock nut with metric thread, for locking by lock washer KM 20

Lock washer for metric lock nuts MB 20

Recommended product

Locating (stabilizing) ring 2 x FRB 7/180

Oil seal kit TSO 220

Oil seal kit TSO 220 A

End cover, for SONL bearing housings ECO 220-520

More Information
Terms of use
By accessing and using this website / app owned and published by AB SKF (publ.) (556007-3495 · Gothenburg) (“SKF”), you
agree to the following terms and conditions:
Warranty Disclaimer and Limitation of Liability
Although every care has been taken to assure the accuracy of the information on this website / app, SKF provides this
information "AS IS" and DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. You acknowledge that your use of this
website / app is at your sole risk, that you assume full responsibility for all costs associated with use of this website / app, and
that SKF shall not be liable for any direct, incidental, consequential, or indirect damages of any kind arising out of your access
to, or use of the information or software made available on this website / app.

Any warranties and representations in this website / app for SKF products or services that you purchase or use will be subject to
the agreed upon terms and conditions in the contract for such product or service.

Further, for non-SKF websites / apps that are referenced in our website / app or where a hyperlink appears, SKF makes no
warranties concerning the accuracy or reliability of the information in these websites / apps and assumes no responsibility for
material created or published by third parties contained therein. In addition, SKF does not warrant that this website / app or
these other linked websites / apps are free from viruses or other harmful elements.
Third Party Services
When viewing YouTube content via the SKF website(s) (i.e. using YouTube API Services), you agree to be bound by the YouTube
Terms of Service.
Copyright
Copyright in this website / app copyright of the information and software made available on this website / app rest with SKF or
its licensors. All rights are reserved. All licensed material will reference the licensor that has granted SKF the right to use the
material. The information and software made available on this website / app may not be reproduced, duplicated, copied,
transferred, distributed, stored, modified, downloaded or otherwise exploited for any commercial use without the prior written
approval of SKF. However, it may be reproduced, stored and downloaded for use by individuals without prior written approval of
SKF. Under no circumstances may this information or software be supplied to third parties.
This website /app includes certain images used under license from Shutterstock, Inc.
Trademarks and Patents
All trademarks, brand names, and corporate logos displayed on the website / app are the property of SKF or its licensors, and
may not be used in any way without prior written approval by SKF. All licensed trademarks published on this website / app
reference the licensor that has granted SKF the right to use the trademark. Access to this website / app does not grant to the
user any license under any patents owned by or licensed to SKF.
Changes
SKF reserves the right to make changes or additions to this website / app at any time.