Model AC1650S Generator set

1500KVA/1200KW
General Performance Data

Prime Power 1500KVA/1200KW Brand Cummins

Engine
Stand by Power 1650KVA/1320KW Model KTA50-GS8

Frequency/Speed 50Hz/1500rpm Control module Deepsea 8610 MKII

Rated Power Factor(cosφ) 0.8 Rated Current 2165A

Standard Voltage 230V/400V Capacity of Breaker 2500A

Phases 3 Starting Voltage DC24V

Fuel consumption Standards followed

Rated output Fuel consumption rate ISO9001 ISO14001

100%Standby 206g/KW.h 345L/h ISO8528 ISO12100

100%Prime 204g/KW.h 309L/h ISO13849 EN12601

75%Prime 210g/KW.h 238L/h GB12786 GB/T2820

50%Prime 221g/KW.h 167L/h IEC60034 IEC60204

25%Prime 232g/KW.h 88L/h CE RETIE

Dimensions and Weights

Type Open

Length(mm) 5500

Width(mm) 2150

Height(mm) 2530

Weight(kg) 9750

Base fuel tank volume (L) N/A

Engine specification

Basic parameter Air induction system

Manufacturer Chongqing Cummins Maximum allowable intake air restriction

Model KTA50-GS8 ---with clean filter element 3.73kPa

No. of cylinder 16 ---with dirty filter element 6.23kPa

Type 4 cycle, 60°Vee Intake Air alarm temperature 82℃

Prime Power 1287kw /1725HP Exhaust system

Standby Power 1429kw /1915HP Max. allowable back pressure 7kPa

Turbocharged and
Induction system Standard exhaust pipe diameter 149mm
Aftercooled

Governor Electrical

Bore x Stroke 159x159mm Cooling system

Displacement 50L Coolant capacity

Compression ratio 15:1 ---Engine only 164.7L

Oil Capacity(Total) 204.4L ---Total system 360.7 L

Coolant Capacity(Engine only) 164.7L ---With heat exchanger 199L

Cranking Motor Voltage DC24V Standard thermostat(modulating) range 82-93 ℃

Fuel System Max. coolant temerature 96.1 ℃

Max. allowable top tank temerature

Type Injection system Direct injection Cummins PT 104/100 ℃
for stand by/prime power
Min. Allowable flow of
348 L/h
fuel to fuel pump

Lubrication system Electric system

Oil Pressure Min. recommended battery capacity (24V)

---Idle speed 138kPa ---10℃(50°F) & above- 0°F CCA 1280A

---Rated speed 345-483kPa --- 0℃(32°F) to 10℃(50°F)- 0°F CCA 1800A

Max. allowable oil temperature 121℃ ---18℃(0°F) to 0℃(32°F)- 0°F CCA 1800A

Oil Pan capacity - Low/High 148/178L Max. allowable resistance of Starting circuit 0.002ohm

Total system capacity 204.4L Starter(heave,Anode) DC24V

Battery recharge system, negative ground 35ampere

Alternator specification – Stamford – Model: S7L1D-C4

Phases 3 Coating Vacuum impregnation

Poles 4 Insulation class H

Power factor(cosφ) 0.8 Protection IP23

Winding connection Star Excitation system Self-excited

Winding pitch 2/3 Bearing Single Bearing

Voltage regulator type AVR Coupling Flexible disc

 Control system Introduction
Deepsea 8610 MKII Auto start & auto Key Features:
mains failure control panel
Deepsea 8610 MKII is an easy to use Synchronising Auto ● Auto start/stop, load transfer and alarming
Start Control Module suitable for use in a multi-generator of generator
loadshare system, designed to synchronise up to 32 ● Remote start on or off load
generators including electronic and non-electronic ● With hierarchical loading function
engines, it can monitor and protect the generator working ● Multiple start/stop cycles can be preset
all the time. it has a LCD display which clearly shows the ● 3 phase generator and mains voltage monitoring.
status of the engine. This controller can also be ● Generator/load power detection(kW, kVA, kVAr PF)
programmed using the front panel or by using DSE ● Overload protection (kW)
configuration Suite PC software. ● Load current monitoring and protection

①Emergency stop button

⑤ ②Power switch ● Engine speed protection
● Engine pre-heat
③Power indicator
● Engine start idle & stop idle
④Operation buttons
● Battery voltage monitoring
④ ③② ① ⑤LCD display
● Start under the low battery
⑥ ⑦ ⑧ ● 4 active outputs
● 4 digital inputs and 3 analogue inputs.
● 6 Custom digital input
● 6 outputs(4 configurable on magnetic pick-up,
6 configurable on Canbus version)
● DSE2130,DSE2157,DSE2548 expansion module
can be connected
● Support 0-10V or 4-20mA oil pressure sensor

⑥Voltage and frequency trimmer ⑨MCB

⑦Governor ⑩Relay
⑧Charger

Main features: Protection:

● Multi language display ● Two sets of protection parameters can be preset

● Mains failure self starting ● Normal alarm, electrical trip and shutdown alarm can be
● The running time of the engine can be recorded to set to effectively monitor the engine speed,oil pressure,
facilitate the maintenance and repair of the unit water temperature and oil level, as well as the frequency,
● User-friendly set-up and button layout voltage, current and power of the alternator, for
● LCD display can display multiple parameters at the complete engine/alternator protection
same time ● Low Oil Pressure
● Support EFI engine ● High water Temperature
● IP65 rating (with optional gasket) ● High voltage and low voltage
● PC and front panel configuration ● Overspeed
● 100 event records ● Emergency stop
● Data recording and trend analysis ● Fail to start
 AOSIF Soundproof Canopy Introduction:

Standard Type：
● The arc angle structure makes the appearance beautiful and ● The sufficient air in & out design ensure long-term and
not easy to bump stable operation of the unit

● High quality coating powder, chemical surface treatment &

● Isolation net is designed for air inlet, exhaust outlet and
100-120um coating thickness greatly improving the anti- muffler outlet to prevent objects from entering the unit
corrosion and anti rust level

● Stainless steel hinge & door lock are beautiful and anti-rust ● High density foam used inside effectively reduces noise

● 2.0mm cold rolled plate used makes the body more solid Ceiling Lighting is equipped for easy operation

● The bottom forklift and loading port design enables easy ● The built-in base fuel tank with fuel filler set on the shell
loading and unloading facilitates refueling

The drainage outlets are all connected to the outside for easy ● Models above medium power range are designed with top
operation hoisting mechanism to facilitate transportation of the unit.

Imitated container type：

● The shell base is independent from the unit with 3mm thick
● The shell is made of 3.0mm hot rolled steel plate so as to
checkered steel plate floor, which is beautiful & antiskid, and
withstand the lifting capacity of 15-ton without deformation
is convenient for overhaul & maintenance of the unit

● The switch cabinet and control panel are respectively set ● The door handle, lock and hinge are all made of stainless
on both sides of the shell for easy maintenance & operation steel to avoid rusting

● The shell looks similar to standard container, and can be ● The air out louver made of the mesh plate with podwer
loaded into 40HQ container for transportation, which is coating and pasted with high-density glass fiber is beautiful
convenient for shipping and not easy to rust, and can further reduce the noise

● The lifting eye holes are designed on the top same as the Isolation net is designed for air inlet, exhaust outlet and
standard container for easy handling muffler outlet to prevent objects from entering the unit

● The sufficient air in & out design ensure long-term and

● High density foam used inside effectively reduces noise
stable operation of the unit

The built-in base fuel tank with fuel filler set on the shell ● The drainage outlets are all connected to the outside for easy
facilitates refueling operation

● Double emergency stop button set on different surfaces

● Ceiling Lighting is equipped for easy operation
enables quick response to operation requirements

Standard container type：

● The switch cabinet and control panel are respectively set
● Can be shipped on board directly during transportation
on both sides of the shell for easy maintenance & operation
● The mesh plate with podwer coating and inner pasted with ● The air in & out louver made of the mesh plate with podwer
high-density glass fiber is installed inside the shell, which is coating and pasted with high-density glass fiber is beautiful
beautiful and anti-rust, and can further reduce the noise and not easy to rust, and can further reduce the noise

● 3mm thick checkered steel plate floor is beautiful & antiskid, ● Isolation net is designed for air inlet, exhaust outlet and
and is convenient for overhaul & maintenance of the unit muffler outlet to prevent objects from entering the unit

● Double emergency stop button set on different surfaces The sufficient air in & out design ensure long-term and
enables quick response to operation requirements stable operation of the unit

● The independent daily fuel tank can be designed to put ● The drainage outlets are all connected to the outside for easy
inside to meet requirements of continuous operation operation

The fuel filler is set on the shell to facilitate refueling ● Ceiling Lighting is equipped for easy operation
Decomposition diagram introduction of AOSIF Typical Canopy

Standard supply scope:

① Engine
⑧ ② AC Alternator
③ Cooling Radiator
④ Auto Start Control Panel
⑨ ⑤ Main Ciruit Breaker
⑥ Built in Shock Pad
⑦ High Strength Frame
⑩ ⑧ Exhaust silencer
⑨ Bellow
⑩ Starting battery

Optional supply scope:

Genset Engine Alternator Control system

● Tool box ● Fuel heater ● Temp. detector for ● ATS

● Base fuel tank ● Fuel and water winding and bearing ● Synchronization
● External daily fuel tank separator ● PMG System
● Antirust, mildew and ● Adjustable earth relay
● Trailer
salt fog treatment
● Anti condensation
heater

Breaker Fuel system Lub-oil system Cooling system

● ABB ● Low fuel level alarm ● Lub oil heater ● Elec.coolant Heater
● Schneider ● Auto Fuel Pump ● Temp.-sensor
● T Vlave ● Oil drain Pump
● AOSIF Engineering provides a full line of brand new and high quality products.

● Each unit passes strictly loading test in factory before shipment.

● Quality Warranty is provided strictly in accordance with warranty terms.

● Three level service guarantee: Aosif dealers, Service outlets of engine/alternator

manufacturers, Aosif service team.

XIAMEN AOSIF ENGINEERING LTD.

Marketing Center: Unit 1001,No.1 of Cheng Yi North Street,Software Park Phase III ,Xiamen ,China;
Factory: No.1088 Tangbian, Changtai Economic Development Zone, Zhangzhou,Fujian,China.
Website: www.aosif.com

You may get more information from our official account.

Specifications are subject to change without notice.